/* Remote debugging interface for MIPS remote debugging protocol.
- Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
- 2002 Free Software Foundation, Inc.
+ Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+ 2003, 2004, 2006, 2007 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by Ian Lance Taylor
<ian@cygnus.com>.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "inferior.h"
#include "gdbcore.h"
#include "serial.h"
#include "target.h"
-#include "remote-utils.h"
+#include "exceptions.h"
#include "gdb_string.h"
#include "gdb_stat.h"
#include "regcache.h"
#include <ctype.h>
+#include "mips-tdep.h"
\f
/* Breakpoint types. Values 0, 1, and 2 must agree with the watch
static int mips_map_regno (int regno);
-static void mips_fetch_registers (int regno);
+static void mips_fetch_registers (struct regcache *regcache, int regno);
-static void mips_prepare_to_store (void);
+static void mips_prepare_to_store (struct regcache *regcache);
-static void mips_store_registers (int regno);
+static void mips_store_registers (struct regcache *regcache, int regno);
static unsigned int mips_fetch_word (CORE_ADDR addr);
static int mips_store_word (CORE_ADDR addr, unsigned int value,
char *old_contents);
-static int mips_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
+static int mips_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len,
int write,
struct mem_attrib *attrib,
struct target_ops *target);
static void mips_files_info (struct target_ops *ignore);
-static void mips_create_inferior (char *execfile, char *args, char **env);
-
static void mips_mourn_inferior (void);
static int pmon_makeb64 (unsigned long v, char *p, int n, int *chksum);
wrap_here (""); /* Force out any buffered output */
gdb_flush (gdb_stdout);
if (error_pre_print)
- fprintf_filtered (gdb_stderr, error_pre_print);
+ fputs_filtered (error_pre_print, gdb_stderr);
vfprintf_filtered (gdb_stderr, string, args);
fprintf_filtered (gdb_stderr, "\n");
va_end (args);
printf_unfiltered ("Ending remote MIPS debugging.\n");
target_mourn_inferior ();
- return_to_top_level (RETURN_ERROR);
+ deprecated_throw_reason (RETURN_ERROR);
}
/* putc_readable - print a character, displaying non-printable chars in
timed out. TIMEOUT specifies timeout value in seconds.
*/
-int
+static int
mips_expect_timeout (const char *string, int timeout)
{
const char *p = string;
mips_expect_timeout if a different timeout value is needed.
*/
-int
+static int
mips_expect (const char *string)
{
return mips_expect_timeout (string, remote_timeout);
}
-/* Read the required number of characters into the given buffer (which
- is assumed to be large enough). The only failure is a timeout. */
-int
-mips_getstring (char *string, int n)
-{
- char *p = string;
- int c;
-
- immediate_quit++;
- while (n > 0)
- {
- c = serial_readchar (mips_desc, remote_timeout);
-
- if (c == SERIAL_TIMEOUT)
- {
- fprintf_unfiltered (gdb_stderr,
- "Failed to read %d characters from target (TIMEOUT)\n", n);
- immediate_quit--;
- return 0;
- }
-
- *p++ = c;
- n--;
- }
-
- immediate_quit--;
- return 1;
-}
-
/* Read a character from the remote, aborting on error. Returns
SERIAL_TIMEOUT on timeout (since that's what serial_readchar()
returns). FIXME: If we see the string mips_monitor_prompt from the
static int
mips_cksum (const unsigned char *hdr, const unsigned char *data, int len)
{
- register const unsigned char *p;
- register int c;
- register int cksum;
+ const unsigned char *p;
+ int c;
+ int cksum;
cksum = 0;
{
/* unsigned */ int len;
unsigned char *packet;
- register int cksum;
+ int cksum;
int try;
len = strlen (s);
{
if (mips_need_reply)
internal_error (__FILE__, __LINE__,
- "mips_request: Trying to send command before reply");
+ _("mips_request: Trying to send command before reply"));
sprintf (buff, "0x0 %c 0x%s 0x%s", cmd, paddr_nz (addr), paddr_nz (data));
mips_send_packet (buff, 1);
mips_need_reply = 1;
if (!mips_need_reply)
internal_error (__FILE__, __LINE__,
- "mips_request: Trying to get reply before command");
+ _("mips_request: Trying to get reply before command"));
mips_need_reply = 0;
}
static void
-mips_initialize_cleanups (PTR arg)
+mips_initialize_cleanups (void *arg)
{
mips_initializing = 0;
}
static void
-mips_exit_cleanups (PTR arg)
+mips_exit_cleanups (void *arg)
{
mips_exiting = 0;
}
the request itself succeeds or fails. */
mips_request ('r', 0, 0, &err, mips_receive_wait, NULL);
- set_current_frame (create_new_frame (read_fp (), read_pc ()));
- select_frame (get_current_frame (), 0);
}
/* Open a connection to the remote board. */
/* FIXME: Should we call start_remote here? */
/* Try to figure out the processor model if possible. */
- ptype = mips_read_processor_type ();
- if (ptype)
- mips_set_processor_type_command (xstrdup (ptype), 0);
+ deprecated_mips_set_processor_regs_hack ();
-/* This is really the job of start_remote however, that makes an assumption
- that the target is about to print out a status message of some sort. That
- doesn't happen here (in fact, it may not be possible to get the monitor to
- send the appropriate packet). */
+ /* This is really the job of start_remote however, that makes an
+ assumption that the target is about to print out a status message
+ of some sort. That doesn't happen here (in fact, it may not be
+ possible to get the monitor to send the appropriate packet). */
- flush_cached_frames ();
+ reinit_frame_cache ();
registers_changed ();
stop_pc = read_pc ();
- set_current_frame (create_new_frame (read_fp (), stop_pc));
- select_frame (get_current_frame (), 0);
- print_stack_frame (selected_frame, -1, 1);
+ print_stack_frame (get_selected_frame (NULL), 0, SRC_AND_LOC);
xfree (serial_port_name);
}
mips_open (char *name, int from_tty)
{
const char *monitor_prompt = NULL;
- if (TARGET_ARCHITECTURE != NULL
- && TARGET_ARCHITECTURE->arch == bfd_arch_mips)
+ if (gdbarch_bfd_arch_info (current_gdbarch) != NULL
+ && gdbarch_bfd_arch_info (current_gdbarch)->arch == bfd_arch_mips)
{
- switch (TARGET_ARCHITECTURE->mach)
+ switch (gdbarch_bfd_arch_info (current_gdbarch)->mach)
{
case bfd_mach_mips4100:
case bfd_mach_mips4300:
/* Return the signal corresponding to SIG, where SIG is the number which
the MIPS protocol uses for the signal. */
-enum target_signal
+static enum target_signal
mips_signal_from_protocol (int sig)
{
/* We allow a few more signals than the IDT board actually returns, on
&rpc, &rfp, &rsp, flags);
if (nfields >= 3)
{
- char buf[MAX_REGISTER_RAW_SIZE];
+ struct regcache *regcache = get_current_regcache ();
+ char buf[MAX_REGISTER_SIZE];
- store_unsigned_integer (buf, REGISTER_RAW_SIZE (PC_REGNUM), rpc);
- supply_register (PC_REGNUM, buf);
+ store_unsigned_integer (buf,
+ register_size
+ (current_gdbarch, gdbarch_pc_regnum
+ (current_gdbarch)), rpc);
+ regcache_raw_supply (regcache, gdbarch_pc_regnum (current_gdbarch), buf);
- store_unsigned_integer (buf, REGISTER_RAW_SIZE (PC_REGNUM), rfp);
- supply_register (30, buf); /* This register they are avoiding and so it is unnamed */
+ store_unsigned_integer
+ (buf, register_size (current_gdbarch,
+ gdbarch_pc_regnum (current_gdbarch)), rfp);
+ regcache_raw_supply (regcache, 30, buf); /* This register they are avoiding and so it is unnamed */
- store_unsigned_integer (buf, REGISTER_RAW_SIZE (SP_REGNUM), rsp);
- supply_register (SP_REGNUM, buf);
+ store_unsigned_integer (buf, register_size (current_gdbarch,
+ gdbarch_sp_regnum (current_gdbarch)), rsp);
+ regcache_raw_supply (regcache, gdbarch_sp_regnum (current_gdbarch), buf);
- store_unsigned_integer (buf, REGISTER_RAW_SIZE (FP_REGNUM), 0);
- supply_register (FP_REGNUM, buf);
+ store_unsigned_integer (buf,
+ register_size (current_gdbarch,
+ gdbarch_deprecated_fp_regnum
+ (current_gdbarch)),
+ 0);
+ regcache_raw_supply (regcache,
+ gdbarch_deprecated_fp_regnum (current_gdbarch), buf);
if (nfields == 9)
{
}
/* We have to map between the register numbers used by gdb and the
- register numbers used by the debugging protocol. This function
- assumes that we are using tm-mips.h. */
+ register numbers used by the debugging protocol. */
#define REGNO_OFFSET 96
{
if (regno < 32)
return regno;
- if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32)
- return regno - FP0_REGNUM + 32;
- switch (regno)
- {
- case PC_REGNUM:
- return REGNO_OFFSET + 0;
- case CAUSE_REGNUM:
- return REGNO_OFFSET + 1;
- case HI_REGNUM:
- return REGNO_OFFSET + 2;
- case LO_REGNUM:
- return REGNO_OFFSET + 3;
- case FCRCS_REGNUM:
- return REGNO_OFFSET + 4;
- case FCRIR_REGNUM:
- return REGNO_OFFSET + 5;
- default:
- /* FIXME: Is there a way to get the status register? */
- return 0;
- }
+ if (regno >= mips_regnum (current_gdbarch)->fp0
+ && regno < mips_regnum (current_gdbarch)->fp0 + 32)
+ return regno - mips_regnum (current_gdbarch)->fp0 + 32;
+ else if (regno == mips_regnum (current_gdbarch)->pc)
+ return REGNO_OFFSET + 0;
+ else if (regno == mips_regnum (current_gdbarch)->cause)
+ return REGNO_OFFSET + 1;
+ else if (regno == mips_regnum (current_gdbarch)->hi)
+ return REGNO_OFFSET + 2;
+ else if (regno == mips_regnum (current_gdbarch)->lo)
+ return REGNO_OFFSET + 3;
+ else if (regno == mips_regnum (current_gdbarch)->fp_control_status)
+ return REGNO_OFFSET + 4;
+ else if (regno == mips_regnum (current_gdbarch)->fp_implementation_revision)
+ return REGNO_OFFSET + 5;
+ else
+ /* FIXME: Is there a way to get the status register? */
+ return 0;
}
/* Fetch the remote registers. */
static void
-mips_fetch_registers (int regno)
+mips_fetch_registers (struct regcache *regcache, int regno)
{
unsigned LONGEST val;
int err;
if (regno == -1)
{
- for (regno = 0; regno < NUM_REGS; regno++)
- mips_fetch_registers (regno);
+ for (regno = 0; regno < gdbarch_num_regs (current_gdbarch); regno++)
+ mips_fetch_registers (regcache, regno);
return;
}
- if (regno == FP_REGNUM || regno == ZERO_REGNUM)
- /* FP_REGNUM on the mips is a hack which is just supposed to read
- zero (see also mips-nat.c). */
+ if (regno == gdbarch_deprecated_fp_regnum (current_gdbarch)
+ || regno == MIPS_ZERO_REGNUM)
+ /* gdbarch_deprecated_fp_regnum on the mips is a hack which is just
+ supposed to read zero (see also mips-nat.c). */
val = 0;
else
{
}
{
- char buf[MAX_REGISTER_RAW_SIZE];
+ char buf[MAX_REGISTER_SIZE];
/* We got the number the register holds, but gdb expects to see a
value in the target byte ordering. */
- store_unsigned_integer (buf, REGISTER_RAW_SIZE (regno), val);
- supply_register (regno, buf);
+ store_unsigned_integer (buf, register_size (current_gdbarch, regno), val);
+ regcache_raw_supply (regcache, regno, buf);
}
}
registers, so this function doesn't have to do anything. */
static void
-mips_prepare_to_store (void)
+mips_prepare_to_store (struct regcache *regcache)
{
}
/* Store remote register(s). */
static void
-mips_store_registers (int regno)
+mips_store_registers (struct regcache *regcache, int regno)
{
+ ULONGEST val;
int err;
if (regno == -1)
{
- for (regno = 0; regno < NUM_REGS; regno++)
- mips_store_registers (regno);
+ for (regno = 0; regno < gdbarch_num_regs (current_gdbarch); regno++)
+ mips_store_registers (regcache, regno);
return;
}
- mips_request ('R', mips_map_regno (regno),
- read_register (regno),
+ regcache_cooked_read_unsigned (regcache, regno, &val);
+ mips_request ('R', mips_map_regno (regno), val,
&err, mips_receive_wait, NULL);
if (err)
mips_error ("Can't write register %d: %s", regno, safe_strerror (errno));
static int mask_address_p = 1;
static int
-mips_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
+mips_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len, int write,
struct mem_attrib *attrib, struct target_ops *target)
{
int i;
printf_unfiltered ("Ending remote MIPS debugging.\n");
target_mourn_inferior ();
- return_to_top_level (RETURN_QUIT);
+ deprecated_throw_reason (RETURN_QUIT);
}
target_terminal_inferior ();
/* Start running on the target board. */
static void
-mips_create_inferior (char *execfile, char *args, char **env)
+mips_create_inferior (char *execfile, char *args, char **env, int from_tty)
{
CORE_ADDR entry_pt;
/* FIXME: Should we set inferior_ptid here? */
- proceed (entry_pt, TARGET_SIGNAL_DEFAULT, 0);
+ write_pc (entry_pt);
}
/* Clean up after a process. Actually nothing to do. */
/* We can write a breakpoint and read the shadow contents in one
operation. */
-/* Insert a breakpoint. On targets that don't have built-in breakpoint
- support, we read the contents of the target location and stash it,
- then overwrite it with a breakpoint instruction. ADDR is the target
- location in the target machine. CONTENTS_CACHE is a pointer to
- memory allocated for saving the target contents. It is guaranteed
- by the caller to be long enough to save sizeof BREAKPOINT bytes (this
- is accomplished via BREAKPOINT_MAX). */
+/* Insert a breakpoint. On targets that don't have built-in
+ breakpoint support, we read the contents of the target location and
+ stash it, then overwrite it with a breakpoint instruction. ADDR is
+ the target location in the target machine. BPT is the breakpoint
+ being inserted or removed, which contains memory for saving the
+ target contents. */
static int
-mips_insert_breakpoint (CORE_ADDR addr, char *contents_cache)
+mips_insert_breakpoint (struct bp_target_info *bp_tgt)
{
if (monitor_supports_breakpoints)
- return set_breakpoint (addr, MIPS_INSTLEN, BREAK_FETCH);
+ return set_breakpoint (bp_tgt->placed_address, MIPS_INSN32_SIZE,
+ BREAK_FETCH);
else
- return memory_insert_breakpoint (addr, contents_cache);
+ return memory_insert_breakpoint (bp_tgt);
}
static int
-mips_remove_breakpoint (CORE_ADDR addr, char *contents_cache)
+mips_remove_breakpoint (struct bp_target_info *bp_tgt)
{
if (monitor_supports_breakpoints)
- return clear_breakpoint (addr, MIPS_INSTLEN, BREAK_FETCH);
+ return clear_breakpoint (bp_tgt->placed_address, MIPS_INSN32_SIZE,
+ BREAK_FETCH);
else
- return memory_remove_breakpoint (addr, contents_cache);
+ return memory_remove_breakpoint (bp_tgt);
}
-#if 0 /* currently not used */
-/* PMON does not currently provide support for the debug mode 'b'
- commands to manipulate breakpoints. However, if we wanted to use
- the monitor breakpoints (rather than the GDB BREAK_INSN version)
- then this code performs the work needed to leave debug mode,
- set/clear the breakpoint, and then return to debug mode. */
-
-#define PMON_MAX_BP (33) /* 32 SW, 1 HW */
-static CORE_ADDR mips_pmon_bp_info[PMON_MAX_BP];
-/* NOTE: The code relies on this vector being zero-initialised by the system */
-
-static int
-pmon_insert_breakpoint (CORE_ADDR addr, char *contents_cache)
-{
- int status;
-
- if (monitor_supports_breakpoints)
- {
- char tbuff[12]; /* space for breakpoint command */
- int bpnum;
- CORE_ADDR bpaddr;
-
- /* PMON does not support debug level breakpoint set/remove: */
- if (mips_exit_debug ())
- mips_error ("Failed to exit debug mode");
-
- sprintf (tbuff, "b %08x\r", addr);
- mips_send_command (tbuff, 0);
-
- mips_expect ("Bpt ");
-
- if (!mips_getstring (tbuff, remote_timeout))
- return 1;
- tbuff[2] = '\0'; /* terminate the string */
- if (sscanf (tbuff, "%d", &bpnum) != 1)
- {
- fprintf_unfiltered (gdb_stderr,
- "Invalid decimal breakpoint number from target: %s\n", tbuff);
- return 1;
- }
-
- mips_expect (" = ");
-
- /* Lead in the hex number we are expecting: */
- tbuff[0] = '0';
- tbuff[1] = 'x';
-
- /* FIXME!! only 8 bytes! need to expand for Bfd64;
- which targets return 64-bit addresses? PMON returns only 32! */
- if (!mips_getstring (&tbuff[2], 8))
- return 1;
- tbuff[10] = '\0'; /* terminate the string */
-
- if (sscanf (tbuff, "0x%08x", &bpaddr) != 1)
- {
- fprintf_unfiltered (gdb_stderr,
- "Invalid hex address from target: %s\n", tbuff);
- return 1;
- }
-
- if (bpnum >= PMON_MAX_BP)
- {
- fprintf_unfiltered (gdb_stderr,
- "Error: Returned breakpoint number %d outside acceptable range (0..%d)\n",
- bpnum, PMON_MAX_BP - 1);
- return 1;
- }
-
- if (bpaddr != addr)
- fprintf_unfiltered (gdb_stderr, "Warning: Breakpoint addresses do not match: 0x%x != 0x%x\n", addr, bpaddr);
-
- mips_pmon_bp_info[bpnum] = bpaddr;
-
- mips_expect ("\r\n");
- mips_expect (mips_monitor_prompt);
-
- mips_enter_debug ();
-
- return 0;
- }
-
- return mips_store_word (addr, BREAK_INSN, contents_cache);
-}
-
-static int
-pmon_remove_breakpoint (CORE_ADDR addr, char *contents_cache)
-{
- if (monitor_supports_breakpoints)
- {
- int bpnum;
- char tbuff[7]; /* enough for delete breakpoint command */
-
- for (bpnum = 0; bpnum < PMON_MAX_BP; bpnum++)
- if (mips_pmon_bp_info[bpnum] == addr)
- break;
-
- if (bpnum >= PMON_MAX_BP)
- {
- fprintf_unfiltered (gdb_stderr,
- "pmon_remove_breakpoint: Failed to find breakpoint at address 0x%s\n",
- paddr_nz (addr));
- return 1;
- }
-
- if (mips_exit_debug ())
- mips_error ("Failed to exit debug mode");
-
- sprintf (tbuff, "db %02d\r", bpnum);
-
- mips_send_command (tbuff, -1);
- /* NOTE: If the breakpoint does not exist then a "Bpt <dd> not
- set" message will be returned. */
-
- mips_enter_debug ();
-
- return 0;
- }
-
- return target_write_memory (addr, contents_cache, BREAK_INSN_SIZE);
-}
-#endif
-
-
/* Tell whether this target can support a hardware breakpoint. CNT
is the number of hardware breakpoints already installed. This
implements the TARGET_CAN_USE_HARDWARE_WATCHPOINT macro. */
int
-remote_mips_can_use_hardware_watchpoint (int cnt)
+mips_can_use_watchpoint (int type, int cnt, int othertype)
{
return cnt < MAX_LSI_BREAKPOINTS && strcmp (target_shortname, "lsi") == 0;
}
}
-/* Insert a hardware breakpoint. This works only on LSI targets, which
- implement ordinary breakpoints using hardware facilities. */
-
-int
-remote_mips_insert_hw_breakpoint (CORE_ADDR addr, char *contents_cache)
-{
- if (strcmp (target_shortname, "lsi") == 0)
- return mips_insert_breakpoint (addr, contents_cache);
- else
- return -1;
-}
-
-
-/* Remove a hardware breakpoint. This works only on LSI targets, which
- implement ordinary breakpoints using hardware facilities. */
-
-int
-remote_mips_remove_hw_breakpoint (CORE_ADDR addr, char *contents_cache)
-{
- if (strcmp (target_shortname, "lsi") == 0)
- return mips_remove_breakpoint (addr, contents_cache);
- else
- return -1;
-}
-
/* Set a data watchpoint. ADDR and LEN should be obvious. TYPE is 0
for a write watchpoint, 1 for a read watchpoint, or 2 for a read/write
watchpoint. */
int
-remote_mips_set_watchpoint (CORE_ADDR addr, int len, int type)
+mips_insert_watchpoint (CORE_ADDR addr, int len, int type)
{
if (set_breakpoint (addr, len, type))
return -1;
}
int
-remote_mips_remove_watchpoint (CORE_ADDR addr, int len, int type)
+mips_remove_watchpoint (CORE_ADDR addr, int len, int type)
{
if (clear_breakpoint (addr, len, type))
return -1;
}
int
-remote_mips_stopped_by_watchpoint (void)
+mips_stopped_by_watchpoint (void)
{
return hit_watchpoint;
}
int rpid, rerrflg, rresponse, rlen;
int nfields;
- addr = ADDR_BITS_REMOVE (addr);
+ addr = gdbarch_addr_bits_remove (current_gdbarch, addr);
if (mips_monitor == MON_LSI)
{
flags = "f";
break;
default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
+ internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
}
cmd = 'B';
/* FIXME! vma too small????? */
printf_filtered ("%s\t: 0x%4lx .. 0x%4lx ", s->name,
(long) s->vma,
- (long) (s->vma + s->_raw_size));
+ (long) (s->vma + bfd_get_section_size (s)));
gdb_flush (gdb_stdout);
- for (i = 0; i < s->_raw_size; i += numbytes)
+ for (i = 0; i < bfd_get_section_size (s); i += numbytes)
{
- numbytes = min (srec_frame, s->_raw_size - i);
+ numbytes = min (srec_frame, bfd_get_section_size (s) - i);
bfd_get_section_contents (abfd, s, buffer, i, numbytes);
- reclen = mips_make_srec (srec, '3', s->vma + i, buffer, numbytes);
+ reclen = mips_make_srec (srec, '3', s->vma + i,
+ buffer, numbytes);
send_srec (srec, reclen, s->vma + i);
- if (ui_load_progress_hook)
- ui_load_progress_hook (s->name, i);
+ if (deprecated_ui_load_progress_hook)
+ deprecated_ui_load_progress_hook (s->name, i);
if (hashmark)
{
for (s = abfd->sections; s && !finished; s = s->next)
if (s->flags & SEC_LOAD) /* only deal with loadable sections */
{
- bintotal += s->_raw_size;
- final = (s->vma + s->_raw_size);
+ bintotal += bfd_get_section_size (s);
+ final = (s->vma + bfd_get_section_size (s));
printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, (unsigned int) s->vma,
- (unsigned int) (s->vma + s->_raw_size));
+ (unsigned int) (s->vma + bfd_get_section_size (s)));
gdb_flush (gdb_stdout);
/* Output the starting address */
reclen = 0;
- for (i = 0; ((i < s->_raw_size) && !finished); i += binamount)
+ for (i = 0;
+ i < bfd_get_section_size (s) && !finished;
+ i += binamount)
{
int binptr = 0;
- binamount = min (BINCHUNK, s->_raw_size - i);
+ binamount = min (BINCHUNK, bfd_get_section_size (s) - i);
bfd_get_section_contents (abfd, s, binbuf, i, binamount);
the line: */
for (; ((binamount - binptr) > 0);)
{
- pmon_make_fastrec (&bp, binbuf, &binptr, binamount, &reclen, &csum, &zerofill);
+ pmon_make_fastrec (&bp, binbuf, &binptr, binamount,
+ &reclen, &csum, &zerofill);
if (reclen >= (MAXRECSIZE - CHECKSIZE))
{
reclen = pmon_checkset (reclen, &bp, &csum);
break;
}
- if (ui_load_progress_hook)
- ui_load_progress_hook (s->name, i);
+ if (deprecated_ui_load_progress_hook)
+ deprecated_ui_load_progress_hook (s->name, i);
if (hashmark)
{
/* Work around problem where PMON monitor updates the PC after a load
to a different value than GDB thinks it has. The following ensures
that the write_pc() WILL update the PC value: */
- register_valid[PC_REGNUM] = 0;
+ deprecated_register_valid[gdbarch_pc_regnum (current_gdbarch)] = 0;
}
if (exec_bfd)
write_pc (bfd_get_start_address (exec_bfd));
printf_filtered ("Received packet: %s\n", buf);
}
\f
+extern initialize_file_ftype _initialize_remote_mips; /* -Wmissing-prototypes */
+
void
_initialize_remote_mips (void)
{
mips_ops.to_fetch_registers = mips_fetch_registers;
mips_ops.to_store_registers = mips_store_registers;
mips_ops.to_prepare_to_store = mips_prepare_to_store;
- mips_ops.to_xfer_memory = mips_xfer_memory;
+ mips_ops.deprecated_xfer_memory = mips_xfer_memory;
mips_ops.to_files_info = mips_files_info;
mips_ops.to_insert_breakpoint = mips_insert_breakpoint;
mips_ops.to_remove_breakpoint = mips_remove_breakpoint;
+ mips_ops.to_insert_watchpoint = mips_insert_watchpoint;
+ mips_ops.to_remove_watchpoint = mips_remove_watchpoint;
+ mips_ops.to_stopped_by_watchpoint = mips_stopped_by_watchpoint;
+ mips_ops.to_can_use_hw_breakpoint = mips_can_use_watchpoint;
mips_ops.to_kill = mips_kill;
mips_ops.to_load = mips_load;
mips_ops.to_create_inferior = mips_create_inferior;
add_target (&ddb_ops);
add_target (&lsi_ops);
- add_show_from_set (
- add_set_cmd ("timeout", no_class, var_zinteger,
- (char *) &mips_receive_wait,
- "Set timeout in seconds for remote MIPS serial I/O.",
- &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("retransmit-timeout", no_class, var_zinteger,
- (char *) &mips_retransmit_wait,
- "Set retransmit timeout in seconds for remote MIPS serial I/O.\n\
+ add_setshow_zinteger_cmd ("timeout", no_class, &mips_receive_wait, _("\
+Set timeout in seconds for remote MIPS serial I/O."), _("\
+Show timeout in seconds for remote MIPS serial I/O."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("retransmit-timeout", no_class,
+ &mips_retransmit_wait, _("\
+Set retransmit timeout in seconds for remote MIPS serial I/O."), _("\
+Show retransmit timeout in seconds for remote MIPS serial I/O."), _("\
This is the number of seconds to wait for an acknowledgement to a packet\n\
-before resending the packet.", &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("syn-garbage-limit", no_class, var_zinteger,
- (char *) &mips_syn_garbage,
- "Set the maximum number of characters to ignore when scanning for a SYN.\n\
+before resending the packet."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("syn-garbage-limit", no_class,
+ &mips_syn_garbage, _("\
+Set the maximum number of characters to ignore when scanning for a SYN."), _("\
+Show the maximum number of characters to ignore when scanning for a SYN."), _("\
This is the maximum number of characters GDB will ignore when trying to\n\
-synchronize with the remote system. A value of -1 means that there is no limit\n\
-(Note that these characters are printed out even though they are ignored.)",
- &setlist),
- &showlist);
-
- add_show_from_set
- (add_set_cmd ("monitor-prompt", class_obscure, var_string,
- (char *) &mips_monitor_prompt,
- "Set the prompt that GDB expects from the monitor.",
- &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("monitor-warnings", class_obscure, var_zinteger,
- (char *) &monitor_warnings,
- "Set printing of monitor warnings.\n"
- "When enabled, monitor warnings about hardware breakpoints "
- "will be displayed.",
- &setlist),
- &showlist);
-
- add_com ("pmon <command>", class_obscure, pmon_command,
- "Send a packet to PMON (must be in debug mode).");
-
- add_show_from_set (add_set_cmd ("mask-address", no_class,
- var_boolean, &mask_address_p,
- "Set zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets.\n\
-Use \"on\" to enable the masking and \"off\" to disable it.\n",
- &setlist),
- &showlist);
+synchronize with the remote system. A value of -1 means that there is no\n\
+limit. (Note that these characters are printed out even though they are\n\
+ignored.)"),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_string_cmd ("monitor-prompt", class_obscure,
+ &mips_monitor_prompt, _("\
+Set the prompt that GDB expects from the monitor."), _("\
+Show the prompt that GDB expects from the monitor."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("monitor-warnings", class_obscure,
+ &monitor_warnings, _("\
+Set printing of monitor warnings."), _("\
+Show printing of monitor warnings."), _("\
+When enabled, monitor warnings about hardware breakpoints will be displayed."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_com ("pmon", class_obscure, pmon_command,
+ _("Send a packet to PMON (must be in debug mode)."));
+
+ add_setshow_boolean_cmd ("mask-address", no_class, &mask_address_p, _("\
+Set zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets."), _("\
+Show zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets."), _("\
+Use \"on\" to enable the masking and \"off\" to disable it."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
}