c = SERIAL_READCHAR (mips_desc, 2);
if (c == SERIAL_TIMEOUT) {
- fprintf_unfiltered (stderr, "Failed to read %d characters from target (TIMEOUT)\n", n);
+ fprintf_unfiltered (gdb_stderr,
+ "Failed to read %d characters from target (TIMEOUT)\n", n);
return 0;
}
int rpid;
char rcmd;
int rerrflg;
- int rresponse;
+ unsigned long rresponse;
if (buff == (char *) NULL)
buff = myBuff;
len = mips_receive_packet (buff, 1, timeout);
buff[len] = '\0';
- if (sscanf (buff, "0x%x %c 0x%x 0x%x",
+ if (sscanf (buff, "0x%x %c 0x%x 0x%lx",
&rpid, &rcmd, &rerrflg, &rresponse) != 4
|| (cmd != '\0' && rcmd != cmd))
mips_error ("Bad response from remote board");
else /* assume IDT monitor by default */
mips_send_command ("db tty0\r", 0);
+ sleep(1);
SERIAL_WRITE (mips_desc, "\r", sizeof "\r" - 1);
/* We don't need to absorb any spurious characters here, since the
mips_request ('x', (unsigned int) 0, (unsigned int) 0, &err,
mips_receive_wait, NULL);
- if (mips_monitor == MON_IDT && !mips_expect ("Exiting remote debug"))
- return -1;
-
- if (mips_monitor == MON_DDB)
- {
- if (!mips_expect ("\n"))
- return -1;
- }
- else
- if (!mips_expect ("\r\n"))
- return -1;
-
if (!mips_expect (mips_monitor_prompt))
return -1;
optional local TFTP name. */
if ((argv = buildargv (name)) == NULL)
nomem(0);
- make_cleanup (freeargv, (char *) argv);
+ make_cleanup ((make_cleanup_func) freeargv, argv);
serial_port_name = strsave (argv[0]);
if (argv[1]) /* remote TFTP name specified? */
{
int err;
-/* start-sanitize-gm */
-#ifndef GENERAL_MAGIC
- if (siggnal != TARGET_SIGNAL_0)
- warning
- ("Can't send signals to a remote system. Try `handle %s ignore'.",
- target_signal_to_name (siggnal));
-#endif /* GENERAL_MAGIC */
-/* end-sanitize-gm */
-
/* LSI PMON requires returns a reply packet "0x1 s 0x0 0x57f" after
a single step, so we wait for that. */
mips_request (step ? 's' : 'c',
if (i % 256 == 255)
{
printf_unfiltered ("*");
- fflush (stdout);
+ gdb_flush (gdb_stdout);
}
if (status)
{
/* FIXME: Should we set inferior_pid here? */
-/* start-sanitize-gm */
-#ifdef GENERAL_MAGIC
- magic_create_inferior_hook ();
- proceed (entry_pt, TARGET_SIGNAL_PWR, 0);
-#else
-/* end-sanitize-gm */
proceed (entry_pt, TARGET_SIGNAL_DEFAULT, 0);
-/* start-sanitize-gm */
-#endif /* GENERAL_MAGIC */
-/* end-sanitize-gm */
}
/* Clean up after a process. Actually nothing to do. */
tbuff[2] = '\0'; /* terminate the string */
if (sscanf (tbuff, "%d", &bpnum) != 1)
{
- fprintf_unfiltered (stderr, "Invalid decimal breakpoint number from target: %s\n", tbuff);
+ fprintf_unfiltered (gdb_stderr,
+ "Invalid decimal breakpoint number from target: %s\n", tbuff);
return 1;
}
if (sscanf (tbuff, "0x%08x", &bpaddr) != 1)
{
- fprintf_unfiltered (stderr, "Invalid hex address from target: %s\n", tbuff);
+ fprintf_unfiltered (gdb_stderr,
+ "Invalid hex address from target: %s\n", tbuff);
return 1;
}
if (bpnum >= PMON_MAX_BP)
{
- fprintf_unfiltered (stderr, "Error: Returned breakpoint number %d outside acceptable range (0..%d)\n",
+ fprintf_unfiltered (gdb_stderr,
+ "Error: Returned breakpoint number %d outside acceptable range (0..%d)\n",
bpnum, PMON_MAX_BP - 1);
return 1;
}
if (bpaddr != addr)
- fprintf_unfiltered (stderr, "Warning: Breakpoint addresses do not match: 0x%x != 0x%x\n", addr, bpaddr);
+ fprintf_unfiltered (gdb_stderr, "Warning: Breakpoint addresses do not match: 0x%x != 0x%x\n", addr, bpaddr);
mips_pmon_bp_info[bpnum] = bpaddr;
if (bpnum >= PMON_MAX_BP)
{
- fprintf_unfiltered (stderr,
+ fprintf_unfiltered (gdb_stderr,
"pmon_remove_breakpoint: Failed to find breakpoint at address 0x%s\n",
paddr_nz (addr));
return 1;
return mask;
}
+
+/* Insert a hardware breakpoint. This works only on LSI targets, which
+ implement ordinary breakpoints using hardware facilities. */
+
+int
+remote_mips_insert_hw_breakpoint (addr, contents_cache)
+ CORE_ADDR addr;
+ char *contents_cache;
+{
+ if (strcmp (target_shortname, "lsi") == 0)
+ return mips_insert_breakpoint (addr, contents_cache);
+ else
+ return -1;
+}
+
+
+/* Remove a hardware breakpoint. This works only on LSI targets, which
+ implement ordinary breakpoints using hardware facilities. */
+
+int
+remote_mips_remove_hw_breakpoint (addr, contents_cache)
+ CORE_ADDR addr;
+ char *contents_cache;
+{
+ if (strcmp (target_shortname, "lsi") == 0)
+ return mips_remove_breakpoint (addr, contents_cache);
+ else
+ return -1;
+}
+
/* Set a data watchpoint. ADDR and LEN should be obvious. TYPE is 0
for a write watchpoint, 1 for a read watchpoint, or 2 for a read/write
watchpoint. */
if ((err->code & rerrflg) == err->code)
{
found = 1;
- fprintf_unfiltered (stderr,
+ fprintf_unfiltered (gdb_stderr,
"common_breakpoint (0x%s): Warning: %s\n",
saddr,
err->string);
}
}
if (!found)
- fprintf_unfiltered (stderr,
+ fprintf_unfiltered (gdb_stderr,
"common_breakpoint (0x%s): Unknown warning: 0x%x\n",
saddr,
rerrflg);
{
if ((err->code & rerrflg) == err->code)
{
- fprintf_unfiltered (stderr,
+ fprintf_unfiltered (gdb_stderr,
"common_breakpoint (0x%s): Error: %s\n",
saddr,
err->string);
return 1;
}
}
- fprintf_unfiltered (stderr,
+ fprintf_unfiltered (gdb_stderr,
"common_breakpoint (0x%s): Unknown error: 0x%x\n",
saddr,
rerrflg);
if (mips_monitor == MON_DDB)
rresponse = rerrflg;
if (rresponse != 22) /* invalid argument */
- fprintf_unfiltered (stderr, "common_breakpoint (0x%s): Got error: 0x%x\n",
+ fprintf_unfiltered (gdb_stderr,
+ "common_breakpoint (0x%s): Got error: 0x%x\n",
paddr_nz (addr), rresponse);
return 1;
}
int count = (n / 6);
if ((n % 12) != 0) {
- fprintf_unfiltered(stderr,"Fast encoding bitcount must be a multiple of 12bits: %dbit%s\n",n,(n == 1)?"":"s");
+ fprintf_unfiltered(gdb_stderr,
+ "Fast encoding bitcount must be a multiple of 12bits: %dbit%s\n",n,(n == 1)?"":"s");
return(0);
}
if (n > 36) {
- fprintf_unfiltered(stderr,"Fast encoding cannot process more than 36bits at the moment: %dbits\n",n);
+ fprintf_unfiltered(gdb_stderr,
+ "Fast encoding cannot process more than 36bits at the moment: %dbits\n",n);
return(0);
}
line. The first argument is the device it is connected to or, if it contains\n\
a colon, HOST:PORT to access a board over a network. The optional second\n\
parameter is the temporary file in the form HOST:FILENAME to be used for\n\
-TFTP downloads to the board. The optional third parameter is the local\n\
-of the TFTP temporary file, if it differs from the filename seen by the board";
+TFTP downloads to the board. The optional third parameter is the local name\n\
+of the TFTP temporary file, if it differs from the filename seen by the board.";
ddb_ops.to_open = ddb_open;
ddb_ops.to_wait = mips_wait;
projects / deliverable / binutils-gdb.git / blobdiff