/* Memory-access and commands for remote NINDY process, for GDB.
- Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
Contributed by Intel Corporation. Modified from remote.c by Chris Benenati.
GDB is distributed in the hope that it will be useful, but WITHOUT ANY
* SEE THE FILE "stop.h" IN THE NINDY MONITOR SOURCE CODE FOR A LIST
* OF STOP CODES.
*
- ******************************************************************************/
+ ***************************************************************************/
#include "defs.h"
#include <signal.h>
#include "frame.h"
#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
#include "target.h"
#include "gdbcore.h"
#include "command.h"
-#include "bfd.h"
#include "ieee-float.h"
#include "wait.h"
-#include <sys/ioctl.h>
#include <sys/file.h>
#include <ctype.h>
-#include "nindy-share/ttycntl.h"
-#include "nindy-share/demux.h"
+#include "serial.h"
#include "nindy-share/env.h"
#include "nindy-share/stop.h"
+#include "dcache.h"
+#include "remote-utils.h"
+
+static DCACHE *nindy_dcache;
+
extern int unlink();
extern char *getenv();
extern char *mktemp();
-extern char *coffstrip();
extern void generic_mourn_inferior ();
extern struct target_ops nindy_ops;
-extern jmp_buf to_top_level;
extern FILE *instream;
extern struct ext_format ext_format_i960; /* i960-tdep.c */
extern char ninStopWhy ();
+extern int ninMemGet ();
+extern int ninMemPut ();
int nindy_initial_brk; /* nonzero if want to send an initial BREAK to nindy */
int nindy_old_protocol; /* nonzero if want to use old protocol */
#define TRUE 1
#define FALSE 0
-int nindy_fd = 0; /* Descriptor for I/O to NINDY */
+/* From nindy-share/nindy.c. */
+extern serial_t nindy_serial;
+
static int have_regs = 0; /* 1 iff regs read since i960 last halted */
static int regs_changed = 0; /* 1 iff regs were modified since last read */
extern char *exists();
-static void
-dcache_flush (), dcache_poke (), dcache_init();
-
-static int
-dcache_fetch ();
-
static void
nindy_fetch_registers PARAMS ((int));
static void
nindy_store_registers PARAMS ((int));
\f
-/* FIXME, we can probably use the normal terminal_inferior stuff here.
- We have to do terminal_inferior and then set up the passthrough
- settings initially. Thereafter, terminal_ours and terminal_inferior
- will automatically swap the settings around for us. */
-
-/* Restore TTY to normal operation */
-
-static TTY_STRUCT orig_tty; /* TTY attributes before entering passthrough */
-
-static void
-restore_tty()
-{
- ioctl( 0, TIOCSETN, &orig_tty );
-}
-
-
-/* Recover from ^Z or ^C while remote process is running */
-
-static void (*old_ctrlc)(); /* Signal handlers before entering passthrough */
-
-#ifdef SIGTSTP
-static void (*old_ctrlz)();
-#endif
-
-static
-#ifdef USG
-void
-#endif
-cleanup()
-{
- restore_tty();
- signal(SIGINT, old_ctrlc);
-#ifdef SIGTSTP
- signal(SIGTSTP, old_ctrlz);
-#endif
- error("\n\nYou may need to reset the 80960 and/or reload your program.\n");
-}
-\f
-/* Clean up anything that needs cleaning when losing control. */
-
static char *savename;
static void
nindy_close (quitting)
int quitting;
{
- if (nindy_fd)
- close (nindy_fd);
- nindy_fd = 0;
+ if (nindy_serial != NULL)
+ SERIAL_CLOSE (nindy_serial);
+ nindy_serial = NULL;
if (savename)
free (savename);
char *name; /* "/dev/ttyXX", "ttyXX", or "XX": tty to be opened */
int from_tty;
{
+ char baudrate[1024];
if (!name)
error_no_arg ("serial port device name");
nindy_close (0);
- have_regs = regs_changed = 0;
- dcache_init();
+ have_regs = regs_changed = 0;
+ nindy_dcache = dcache_init(ninMemGet, ninMemPut);
- /* Allow user to interrupt the following -- we could hang if
- * there's no NINDY at the other end of the remote tty.
- */
- immediate_quit++;
- nindy_fd = ninConnect( name, baud_rate? baud_rate: "9600",
- nindy_initial_brk, !from_tty, nindy_old_protocol );
- immediate_quit--;
+ /* Allow user to interrupt the following -- we could hang if there's
+ no NINDY at the other end of the remote tty. */
+ immediate_quit++;
+ sprintf(baudrate, "%d", sr_get_baud_rate());
+ ninConnect(name, baudrate,
+ nindy_initial_brk, !from_tty, nindy_old_protocol);
+ immediate_quit--;
- if ( nindy_fd < 0 ){
- nindy_fd = 0;
- error( "Can't open tty '%s'", name );
- }
+ if (nindy_serial == NULL)
+ {
+ perror_with_name (name);
+ }
- savename = savestring (name, strlen (name));
- push_target (&nindy_ops);
- target_fetch_registers(-1);
+ savename = savestring (name, strlen (name));
+ push_target (&nindy_ops);
+ target_fetch_registers(-1);
}
/* User-initiated quit of nindy operations. */
static void
nindy_files_info ()
{
- printf("\tAttached to %s at %s bps%s%s.\n", savename,
- baud_rate? baud_rate: "9600",
+ printf("\tAttached to %s at %d bps%s%s.\n", savename,
+ sr_get_baud_rate(),
nindy_old_protocol? " in old protocol": "",
nindy_initial_brk? " with initial break": "");
}
\f
-/******************************************************************************
- * remote_load:
- * Download an object file to the remote system by invoking the "comm960"
- * utility. We look for "comm960" in $G960BIN, $G960BASE/bin, and
- * DEFAULT_BASE/bin/HOST/bin where
- * DEFAULT_BASE is defined in env.h, and
- * HOST must be defined on the compiler invocation line.
- ******************************************************************************/
-
-static void
-nindy_load( filename, from_tty )
- char *filename;
- int from_tty;
-{
- asection *s;
- /* Can't do unix style forking on a VMS system, so we'll use bfd to do
- all the work for us
- */
-
- bfd *file = bfd_openr(filename,0);
- if (!file)
- {
- perror_with_name(filename);
- return;
- }
-
- if (!bfd_check_format(file, bfd_object))
- {
- error("can't prove it's an object file\n");
- return;
- }
-
- for ( s = file->sections; s; s=s->next)
- {
- if (s->flags & SEC_LOAD)
- {
- char *buffer = xmalloc(s->_raw_size);
- bfd_get_section_contents(file, s, buffer, 0, s->_raw_size);
- printf("Loading section %s, size %x vma %x\n",
- s->name,
- s->_raw_size,
- s->vma);
- ninMemPut(s->vma, buffer, s->_raw_size);
- free(buffer);
- }
- }
- bfd_close(file);
-}
-
-/* Return the number of characters in the buffer before the first DLE character.
- */
+/* Return the number of characters in the buffer before
+ the first DLE character. */
static
int
/* Tell the remote machine to resume. */
void
-nindy_resume (step, siggnal)
- int step, siggnal;
+nindy_resume (pid, step, siggnal)
+ int pid, step, siggnal;
{
if (siggnal != 0 && siggnal != stop_signal)
error ("Can't send signals to remote NINDY targets.");
- dcache_flush();
+ dcache_flush(nindy_dcache);
if ( regs_changed ){
nindy_store_registers (-1);
regs_changed = 0;
have_regs = 0;
ninGo( step );
}
+\f
+/* FIXME, we can probably use the normal terminal_inferior stuff here.
+ We have to do terminal_inferior and then set up the passthrough
+ settings initially. Thereafter, terminal_ours and terminal_inferior
+ will automatically swap the settings around for us. */
+
+struct clean_up_tty_args {
+ serial_ttystate state;
+ serial_t serial;
+};
+
+static void
+clean_up_tty (ptrarg)
+ PTR ptrarg;
+{
+ struct clean_up_tty_args *args = (struct clean_up_tty_args *) ptrarg;
+ SERIAL_SET_TTY_STATE (args->serial, args->state);
+ free (args->state);
+ warning ("\n\n\
+You may need to reset the 80960 and/or reload your program.\n");
+}
/* Wait until the remote machine stops. While waiting, operate in passthrough
* mode; i.e., pass everything NINDY sends to stdout, and everything from
nindy_wait( status )
WAITTYPE *status;
{
- DEMUX_DECL; /* OS-dependent data needed by DEMUX... macros */
- char buf[500]; /* FIXME, what is "500" here? */
- int i, n;
- unsigned char stop_exit;
- unsigned char stop_code;
- TTY_STRUCT tty;
- long ip_value, fp_value, sp_value; /* Reg values from stop */
-
-
- WSETEXIT( (*status), 0 );
-
- /* OPERATE IN PASSTHROUGH MODE UNTIL NINDY SENDS A DLE CHARACTER */
-
- /* Save current tty attributes, set up signals to restore them.
- */
- ioctl( 0, TIOCGETP, &orig_tty );
- old_ctrlc = signal( SIGINT, cleanup );
-#ifdef SIGTSTP
- old_ctrlz = signal( SIGTSTP, cleanup );
-#endif
-
- /* Pass input from keyboard to NINDY as it arrives.
- * NINDY will interpret <CR> and perform echo.
- */
- tty = orig_tty;
- TTY_NINDYTERM( tty );
- ioctl( 0, TIOCSETN, &tty );
-
- while ( 1 ){
- /* Go to sleep until there's something for us on either
- * the remote port or stdin.
- */
-
- DEMUX_WAIT( nindy_fd );
-
- /* Pass input through to correct place */
-
- n = DEMUX_READ( 0, buf, sizeof(buf) );
- if ( n ){ /* Input on stdin */
- write( nindy_fd, buf, n );
+ fd_set fds;
+ char buf[500]; /* FIXME, what is "500" here? */
+ int i, n;
+ unsigned char stop_exit;
+ unsigned char stop_code;
+ struct clean_up_tty_args tty_args;
+ struct cleanup *old_cleanups;
+ long ip_value, fp_value, sp_value; /* Reg values from stop */
+
+ WSETEXIT( (*status), 0 );
+
+ /* OPERATE IN PASSTHROUGH MODE UNTIL NINDY SENDS A DLE CHARACTER */
+
+ /* Save current tty attributes, and restore them when done. */
+ tty_args.serial = SERIAL_FDOPEN (0);
+ tty_args.state = SERIAL_GET_TTY_STATE (tty_args.serial);
+ old_cleanups = make_cleanup (clean_up_tty, &tty_args);
+
+ /* Pass input from keyboard to NINDY as it arrives. NINDY will interpret
+ <CR> and perform echo. */
+ /* This used to set CBREAK and clear ECHO and CRMOD. I hope this is close
+ enough. */
+ SERIAL_RAW (tty_args.serial);
+
+ while (1)
+ {
+ /* Wait for input on either the remote port or stdin. */
+ FD_ZERO (&fds);
+ FD_SET (0, &fds);
+ FD_SET (nindy_serial->fd, &fds);
+ if (select (nindy_serial->fd + 1, &fds, 0, 0, 0) <= 0)
+ continue;
+
+ /* Pass input through to correct place */
+ if (FD_ISSET (0, &fds))
+ {
+ /* Input on stdin */
+ n = read (0, buf, sizeof (buf));
+ if (n)
+ {
+ SERIAL_WRITE (nindy_serial, buf, n );
+ }
+ }
+
+ if (FD_ISSET (nindy_serial->fd, &fds))
+ {
+ /* Input on remote */
+ n = read (nindy_serial->fd, buf, sizeof (buf));
+ if (n)
+ {
+ /* Write out any characters in buffer preceding DLE */
+ i = non_dle( buf, n );
+ if ( i > 0 )
+ {
+ write (1, buf, i);
}
- n = DEMUX_READ( nindy_fd, buf, sizeof(buf) );
- if ( n ){ /* Input on remote */
- /* Write out any characters in buffer preceding DLE */
- i = non_dle( buf, n );
- if ( i > 0 ){
- write( 1, buf, i );
- }
-
- if ( i != n ){
- /* There *was* a DLE in the buffer */
- stop_exit = ninStopWhy( &stop_code,
- &ip_value, &fp_value, &sp_value);
- if ( !stop_exit && (stop_code==STOP_SRQ) ){
- immediate_quit++;
- ninSrq();
- immediate_quit--;
- } else {
- /* Get out of loop */
- supply_register (IP_REGNUM,
- (char *)&ip_value);
- supply_register (FP_REGNUM,
- (char *)&fp_value);
- supply_register (SP_REGNUM,
- (char *)&sp_value);
- break;
- }
- }
+ if (i != n)
+ {
+ /* There *was* a DLE in the buffer */
+ stop_exit = ninStopWhy(&stop_code,
+ &ip_value, &fp_value, &sp_value);
+ if (!stop_exit && (stop_code == STOP_SRQ))
+ {
+ immediate_quit++;
+ ninSrq();
+ immediate_quit--;
+ }
+ else
+ {
+ /* Get out of loop */
+ supply_register (IP_REGNUM,
+ (char *)&ip_value);
+ supply_register (FP_REGNUM,
+ (char *)&fp_value);
+ supply_register (SP_REGNUM,
+ (char *)&sp_value);
+ break;
+ }
}
+ }
}
+ }
- signal( SIGINT, old_ctrlc );
-#ifdef SIGTSTP
- signal( SIGTSTP, old_ctrlz );
-#endif
- restore_tty();
-
- if ( stop_exit ){ /* User program exited */
- WSETEXIT( (*status), stop_code );
- } else { /* Fault or trace */
- switch (stop_code){
- case STOP_GDB_BPT:
- case TRACE_STEP:
- /* Make it look like a VAX trace trap */
- stop_code = SIGTRAP;
- break;
- default:
- /* The target is not running Unix, and its
- faults/traces do not map nicely into Unix signals.
- Make sure they do not get confused with Unix signals
- by numbering them with values higher than the highest
- legal Unix signal. code in i960_print_fault(),
- called via PRINT_RANDOM_SIGNAL, will interpret the
- value. */
- stop_code += NSIG;
- break;
- }
- WSETSTOP( (*status), stop_code );
+ do_cleanups (old_cleanups);
+
+ if (stop_exit)
+ {
+ /* User program exited */
+ WSETEXIT ((*status), stop_code);
+ }
+ else
+ {
+ /* Fault or trace */
+ switch (stop_code)
+ {
+ case STOP_GDB_BPT:
+ case TRACE_STEP:
+ /* Breakpoint or single stepping. */
+ stop_code = SIGTRAP;
+ break;
+ default:
+ /* The target is not running Unix, and its faults/traces do
+ not map nicely into Unix signals. Make sure they do not
+ get confused with Unix signals by numbering them with
+ values higher than the highest legal Unix signal. code
+ in i960_print_fault(), called via PRINT_RANDOM_SIGNAL,
+ will interpret the value. */
+ stop_code += NSIG;
+ break;
}
- return inferior_pid;
+ WSETSTOP ((*status), stop_code);
+ }
+ return inferior_pid;
}
/* Read the remote registers into the block REGS. */
ninRegsGet( (char *) &nindy_regs );
immediate_quit--;
- bcopy (nindy_regs.local_regs, ®isters[REGISTER_BYTE (R0_REGNUM)], 16*4);
- bcopy (nindy_regs.global_regs, ®isters[REGISTER_BYTE (G0_REGNUM)], 16*4);
- bcopy (nindy_regs.pcw_acw, ®isters[REGISTER_BYTE (PCW_REGNUM)], 2*4);
- bcopy (nindy_regs.ip, ®isters[REGISTER_BYTE (IP_REGNUM)], 1*4);
- bcopy (nindy_regs.tcw, ®isters[REGISTER_BYTE (TCW_REGNUM)], 1*4);
+ memcpy (®isters[REGISTER_BYTE (R0_REGNUM)], nindy_regs.local_regs, 16*4);
+ memcpy (®isters[REGISTER_BYTE (G0_REGNUM)], nindy_regs.global_regs, 16*4);
+ memcpy (®isters[REGISTER_BYTE (PCW_REGNUM)], nindy_regs.pcw_acw, 2*4);
+ memcpy (®isters[REGISTER_BYTE (IP_REGNUM)], nindy_regs.ip, 1*4);
+ memcpy (®isters[REGISTER_BYTE (TCW_REGNUM)], nindy_regs.tcw, 1*4);
for (regnum = FP0_REGNUM; regnum < FP0_REGNUM + 4; regnum++) {
dub = unpack_double (builtin_type_double,
&nindy_regs.fp_as_double[8 * (regnum - FP0_REGNUM)],
int regnum, inv;
double dub;
- bcopy (®isters[REGISTER_BYTE (R0_REGNUM)], nindy_regs.local_regs, 16*4);
- bcopy (®isters[REGISTER_BYTE (G0_REGNUM)], nindy_regs.global_regs, 16*4);
- bcopy (®isters[REGISTER_BYTE (PCW_REGNUM)], nindy_regs.pcw_acw, 2*4);
- bcopy (®isters[REGISTER_BYTE (IP_REGNUM)], nindy_regs.ip, 1*4);
- bcopy (®isters[REGISTER_BYTE (TCW_REGNUM)], nindy_regs.tcw, 1*4);
+ memcpy (nindy_regs.local_regs, ®isters[REGISTER_BYTE (R0_REGNUM)], 16*4);
+ memcpy (nindy_regs.global_regs, ®isters[REGISTER_BYTE (G0_REGNUM)], 16*4);
+ memcpy (nindy_regs.pcw_acw, ®isters[REGISTER_BYTE (PCW_REGNUM)], 2*4);
+ memcpy (nindy_regs.ip, ®isters[REGISTER_BYTE (IP_REGNUM)], 1*4);
+ memcpy (nindy_regs.tcw, ®isters[REGISTER_BYTE (TCW_REGNUM)], 1*4);
/* Float regs. Only works on IEEE_FLOAT hosts. FIXME! */
for (regnum = FP0_REGNUM; regnum < FP0_REGNUM + 4; regnum++) {
ieee_extended_to_double (&ext_format_i960,
This mostly works but not quite. */
dub = unpack_double (builtin_type_double, (char *)&dub, &inv);
/* dub now in target byte order */
- bcopy ((char *)&dub, &nindy_regs.fp_as_double[8 * (regnum - FP0_REGNUM)],
- 8);
+ memcpy (&nindy_regs.fp_as_double[8 * (regnum - FP0_REGNUM)], &dub, 8);
}
immediate_quit++;
nindy_fetch_word (addr)
CORE_ADDR addr;
{
- return dcache_fetch (addr);
+ return dcache_fetch (nindy_dcache, addr);
}
/* Write a word WORD into remote address ADDR.
CORE_ADDR addr;
int word;
{
- dcache_poke (addr, word);
+ dcache_poke (nindy_dcache, addr, word);
}
/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
/* Copy data to be written over corresponding part of buffer */
- bcopy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+ memcpy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
/* Write the entire buffer. */
}
/* Copy appropriate bytes out of the buffer. */
- bcopy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
+ memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
}
return len;
}
\f
-/* The data cache records all the data read from the remote machine
- since the last time it stopped.
-
- Each cache block holds 16 bytes of data
- starting at a multiple-of-16 address. */
-
-#define DCACHE_SIZE 64 /* Number of cache blocks */
-
-struct dcache_block {
- struct dcache_block *next, *last;
- unsigned int addr; /* Address for which data is recorded. */
- int data[4];
-};
-
-struct dcache_block dcache_free, dcache_valid;
-
-/* Free all the data cache blocks, thus discarding all cached data. */
-static
-void
-dcache_flush ()
-{
- register struct dcache_block *db;
-
- while ((db = dcache_valid.next) != &dcache_valid)
- {
- remque (db);
- insque (db, &dcache_free);
- }
-}
-
-/*
- * If addr is present in the dcache, return the address of the block
- * containing it.
- */
-static
-struct dcache_block *
-dcache_hit (addr)
- unsigned int addr;
-{
- register struct dcache_block *db;
-
- if (addr & 3)
- abort ();
-
- /* Search all cache blocks for one that is at this address. */
- db = dcache_valid.next;
- while (db != &dcache_valid)
- {
- if ((addr & 0xfffffff0) == db->addr)
- return db;
- db = db->next;
- }
- return NULL;
-}
-
-/* Return the int data at address ADDR in dcache block DC. */
-static
-int
-dcache_value (db, addr)
- struct dcache_block *db;
- unsigned int addr;
-{
- if (addr & 3)
- abort ();
- return (db->data[(addr>>2)&3]);
-}
-
-/* Get a free cache block, put or keep it on the valid list,
- and return its address. The caller should store into the block
- the address and data that it describes, then remque it from the
- free list and insert it into the valid list. This procedure
- prevents errors from creeping in if a ninMemGet is interrupted
- (which used to put garbage blocks in the valid list...). */
-static
-struct dcache_block *
-dcache_alloc ()
-{
- register struct dcache_block *db;
-
- if ((db = dcache_free.next) == &dcache_free)
- {
- /* If we can't get one from the free list, take last valid and put
- it on the free list. */
- db = dcache_valid.last;
- remque (db);
- insque (db, &dcache_free);
- }
-
- remque (db);
- insque (db, &dcache_valid);
- return (db);
-}
-
-/* Return the contents of the word at address ADDR in the remote machine,
- using the data cache. */
-static
-int
-dcache_fetch (addr)
- CORE_ADDR addr;
-{
- register struct dcache_block *db;
-
- db = dcache_hit (addr);
- if (db == 0)
- {
- db = dcache_alloc ();
- immediate_quit++;
- ninMemGet(addr & ~0xf, (unsigned char *)db->data, 16);
- immediate_quit--;
- db->addr = addr & ~0xf;
- remque (db); /* Off the free list */
- insque (db, &dcache_valid); /* On the valid list */
- }
- return (dcache_value (db, addr));
-}
-
-/* Write the word at ADDR both in the data cache and in the remote machine. */
-static void
-dcache_poke (addr, data)
- CORE_ADDR addr;
- int data;
-{
- register struct dcache_block *db;
-
- /* First make sure the word is IN the cache. DB is its cache block. */
- db = dcache_hit (addr);
- if (db == 0)
- {
- db = dcache_alloc ();
- immediate_quit++;
- ninMemGet(addr & ~0xf, (unsigned char *)db->data, 16);
- immediate_quit--;
- db->addr = addr & ~0xf;
- remque (db); /* Off the free list */
- insque (db, &dcache_valid); /* On the valid list */
- }
-
- /* Modify the word in the cache. */
- db->data[(addr>>2)&3] = data;
-
- /* Send the changed word. */
- immediate_quit++;
- ninMemPut(addr, (unsigned char *)&data, 4);
- immediate_quit--;
-}
-
-/* The cache itself. */
-struct dcache_block the_cache[DCACHE_SIZE];
-
-/* Initialize the data cache. */
-static void
-dcache_init ()
-{
- register i;
- register struct dcache_block *db;
-
- db = the_cache;
- dcache_free.next = dcache_free.last = &dcache_free;
- dcache_valid.next = dcache_valid.last = &dcache_valid;
- for (i=0;i<DCACHE_SIZE;i++,db++)
- insque (db, &dcache_free);
-}
-
-
static void
nindy_create_inferior (execfile, args, env)
char *execfile;
char *args;
int from_tty;
{
- if ( !nindy_fd ){
- error( "No target system to reset -- use 'target nindy' command.");
- }
- if ( query("Really reset the target system?",0,0) ){
- send_break( nindy_fd );
- tty_flush( nindy_fd );
- }
+ if (nindy_serial == NULL)
+ {
+ error( "No target system to reset -- use 'target nindy' command.");
+ }
+ if ( query("Really reset the target system?",0,0) )
+ {
+ SERIAL_SEND_BREAK (nindy_serial);
+ tty_flush (nindy_serial);
+ }
}
void
nindy_mourn_inferior ()
{
remove_breakpoints ();
+ unpush_target (&nindy_ops);
generic_mourn_inferior (); /* Do all the proper things now */
}
\f
+/* Pass the args the way catch_errors wants them. */
+static int
+nindy_open_stub (arg)
+ char *arg;
+{
+ nindy_open (arg, 1);
+ return 1;
+}
+
+static int
+load_stub (arg)
+ char *arg;
+{
+ target_load (arg, 1);
+ return 1;
+}
+
/* This routine is run as a hook, just before the main command loop is
entered. If gdb is configured for the i960, but has not had its
nindy target specified yet, this will loop prompting the user to do so.
char ttyname[100];
char *p, *p2;
- setjmp(to_top_level);
while (current_target != &nindy_ops) { /* remote tty not specified yet */
if ( instream == stdin ){
printf("\nAttach /dev/ttyNN -- specify NN, or \"quit\" to quit: ");
;
}
*p2= '\0';
- if ( !strcmp("quit",p) ){
+ if ( STREQ("quit",p) ){
exit(1);
}
- nindy_open( p, 1 );
-
- /* Now that we have a tty open for talking to the remote machine,
- download the executable file if one was specified. */
- if ( !setjmp(to_top_level) && exec_bfd ) {
- target_load (bfd_get_filename (exec_bfd), 1);
- }
+ if (catch_errors (nindy_open_stub, p, "", RETURN_MASK_ALL))
+ {
+ /* Now that we have a tty open for talking to the remote machine,
+ download the executable file if one was specified. */
+ if (exec_bfd)
+ {
+ catch_errors (load_stub, bfd_get_filename (exec_bfd), "",
+ RETURN_MASK_ALL);
+ }
+ }
}
}
\f
and whether to send a break on startup, are controlled by options\n\
specified when you started GDB.",
nindy_open, nindy_close,
- 0, nindy_detach, nindy_resume, nindy_wait,
+ 0,
+ nindy_detach,
+ nindy_resume,
+ nindy_wait,
nindy_fetch_registers, nindy_store_registers,
nindy_prepare_to_store,
nindy_xfer_inferior_memory, nindy_files_info,
0, 0, /* insert_breakpoint, remove_breakpoint, */
0, 0, 0, 0, 0, /* Terminal crud */
nindy_kill,
- nindy_load,
+ generic_load,
0, /* lookup_symbol */
nindy_create_inferior,
nindy_mourn_inferior,