/* Memory-access and commands for remote NINDY process, for GDB.
- Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993, 2001 Free Software Foundation, Inc.
Contributed by Intel Corporation. Modified from remote.c by Chris Benenati.
GDB is distributed in the hope that it will be useful, but WITHOUT ANY
#include "serial.h"
#include "nindy-share/env.h"
#include "nindy-share/stop.h"
-
-#include "dcache.h"
#include "remote-utils.h"
-static DCACHE *nindy_dcache;
-
extern int unlink ();
extern char *getenv ();
extern char *mktemp ();
extern char *exists ();
-static void
-nindy_fetch_registers PARAMS ((int));
+static void nindy_fetch_registers (int);
-static void
-nindy_store_registers PARAMS ((int));
+static void nindy_store_registers (int);
\f
static char *savename;
static void
-nindy_close (quitting)
- int quitting;
+nindy_close (int quitting)
{
if (nindy_serial != NULL)
SERIAL_CLOSE (nindy_serial);
nindy_serial = NULL;
if (savename)
- free (savename);
+ xfree (savename);
savename = 0;
}
now specified with gdb command-line options (old_protocol,
and initial_brk). */
void
-nindy_open (name, from_tty)
- char *name; /* "/dev/ttyXX", "ttyXX", or "XX": tty to be opened */
- int from_tty;
+nindy_open (char *name, /* "/dev/ttyXX", "ttyXX", or "XX": tty to be opened */
+ int from_tty)
{
char baudrate[1024];
nindy_close (0);
have_regs = regs_changed = 0;
- nindy_dcache = dcache_init (ninMemGet, ninMemPut);
/* Allow user to interrupt the following -- we could hang if there's
no NINDY at the other end of the remote tty. */
/* User-initiated quit of nindy operations. */
static void
-nindy_detach (name, from_tty)
- char *name;
- int from_tty;
+nindy_detach (char *name, int from_tty)
{
if (name)
error ("Too many arguments");
}
static void
-nindy_files_info ()
+nindy_files_info (void)
{
/* FIXME: this lies about the baud rate if we autobauded. */
printf_unfiltered ("\tAttached to %s at %d bits per second%s%s.\n", savename,
nindy_initial_brk ? " with initial break" : "");
}
\f
-/* Return the number of characters in the buffer before
- the first DLE character. */
+/* Return the number of characters in the buffer BUF before
+ the first DLE character. N is maximum number of characters to
+ consider. */
static
int
-non_dle (buf, n)
- char *buf; /* Character buffer; NOT '\0'-terminated */
- int n; /* Number of characters in buffer */
+non_dle (char *buf, int n)
{
int i;
/* Tell the remote machine to resume. */
void
-nindy_resume (pid, step, siggnal)
- int pid, step;
- enum target_signal siggnal;
+nindy_resume (int pid, int step, enum target_signal siggnal)
{
if (siggnal != TARGET_SIGNAL_0 && siggnal != stop_signal)
warning ("Can't send signals to remote NINDY targets.");
- dcache_flush (nindy_dcache);
if (regs_changed)
{
nindy_store_registers (-1);
static struct clean_up_tty_args tty_args;
static void
-clean_up_tty (ptrarg)
- PTR ptrarg;
+clean_up_tty (PTR ptrarg)
{
struct clean_up_tty_args *args = (struct clean_up_tty_args *) ptrarg;
SERIAL_SET_TTY_STATE (args->serial, args->state);
- free (args->state);
+ xfree (args->state);
warning ("\n\nYou may need to reset the 80960 and/or reload your program.\n");
}
#endif
static void
-clean_up_int ()
+clean_up_int (void)
{
SERIAL_SET_TTY_STATE (tty_args.serial, tty_args.state);
- free (tty_args.state);
+ xfree (tty_args.state);
signal (SIGINT, old_ctrlc);
#ifdef SIGTSTP
*/
static int
-nindy_wait (pid, status)
- int pid;
- struct target_waitstatus *status;
+nindy_wait (int pid, struct target_waitstatus *status)
{
fd_set fds;
int c;
}
SERIAL_SET_TTY_STATE (tty_args.serial, tty_args.state);
- free (tty_args.state);
+ xfree (tty_args.state);
discard_cleanups (old_cleanups);
if (stop_exit)
};
static void
-nindy_fetch_registers (regno)
- int regno;
+nindy_fetch_registers (int regno)
{
struct nindy_regs nindy_regs;
int regnum;
}
static void
-nindy_prepare_to_store ()
+nindy_prepare_to_store (void)
{
/* Fetch all regs if they aren't already here. */
read_register_bytes (0, NULL, REGISTER_BYTES);
}
static void
-nindy_store_registers (regno)
- int regno;
+nindy_store_registers (int regno)
{
struct nindy_regs nindy_regs;
int regnum;
immediate_quit--;
}
-/* Read a word from remote address ADDR and return it.
- * This goes through the data cache.
- */
-int
-nindy_fetch_word (addr)
- CORE_ADDR addr;
-{
- return dcache_fetch (nindy_dcache, addr);
-}
-
-/* Write a word WORD into remote address ADDR.
- This goes through the data cache. */
-
-void
-nindy_store_word (addr, word)
- CORE_ADDR addr;
- int word;
-{
- dcache_poke (nindy_dcache, addr, word);
-}
-
/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
to debugger memory starting at MYADDR. Copy to inferior if
- WRITE is nonzero. Returns the length copied.
-
- This is stolen almost directly from infptrace.c's child_xfer_memory,
- which also deals with a word-oriented memory interface. Sometime,
- FIXME, rewrite this to not use the word-oriented routines. */
+ SHOULD_WRITE is nonzero. Returns the length copied. TARGET is
+ unused. */
int
-nindy_xfer_inferior_memory (memaddr, myaddr, len, should_write, target)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
- int should_write;
- struct target_ops *target; /* ignored */
+nindy_xfer_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len,
+ int should_write,
+ struct mem_attrib *attrib ATTRIBUTE_UNUSED,
+ struct target_ops *target ATTRIBUTE_UNUSED)
{
- register int i;
- /* Round starting address down to longword boundary. */
- register CORE_ADDR addr = memaddr & -sizeof (int);
- /* Round ending address up; get number of longwords that makes. */
- register int count
- = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
- /* Allocate buffer of that many longwords. */
- register int *buffer = (int *) alloca (count * sizeof (int));
-
- if (should_write)
- {
- /* Fill start and end extra bytes of buffer with existing memory data. */
-
- if (addr != memaddr || len < (int) sizeof (int))
- {
- /* Need part of initial word -- fetch it. */
- buffer[0] = nindy_fetch_word (addr);
- }
-
- if (count > 1) /* FIXME, avoid if even boundary */
- {
- buffer[count - 1]
- = nindy_fetch_word (addr + (count - 1) * sizeof (int));
- }
-
- /* Copy data to be written over corresponding part of buffer */
-
- memcpy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
+ int res;
- /* Write the entire buffer. */
+ if (len <= 0)
+ return 0;
- for (i = 0; i < count; i++, addr += sizeof (int))
- {
- errno = 0;
- nindy_store_word (addr, buffer[i]);
- if (errno)
- return 0;
- }
- }
+ if (should_write)
+ res = ninMemPut (memaddr, myaddr, len);
else
- {
- /* Read all the longwords */
- for (i = 0; i < count; i++, addr += sizeof (int))
- {
- errno = 0;
- buffer[i] = nindy_fetch_word (addr);
- if (errno)
- return 0;
- QUIT;
- }
+ res = ninMemGet (memaddr, myaddr, len);
- /* Copy appropriate bytes out of the buffer. */
- memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
- }
- return len;
+ return res;
}
\f
static void
-nindy_create_inferior (execfile, args, env)
- char *execfile;
- char *args;
- char **env;
+nindy_create_inferior (char *execfile, char *args, char **env)
{
int entry_pt;
int pid;
}
static void
-reset_command (args, from_tty)
- char *args;
- int from_tty;
+reset_command (char *args, int from_tty)
{
if (nindy_serial == NULL)
{
}
void
-nindy_kill (args, from_tty)
- char *args;
- int from_tty;
+nindy_kill (char *args, int from_tty)
{
return; /* Ignore attempts to kill target system */
}
instructions. */
void
-nindy_mourn_inferior ()
+nindy_mourn_inferior (void)
{
remove_breakpoints ();
unpush_target (&nindy_ops);
\f
/* Pass the args the way catch_errors wants them. */
static int
-nindy_open_stub (arg)
- char *arg;
+nindy_open_stub (char *arg)
{
nindy_open (arg, 1);
return 1;
}
static void
-nindy_load (filename, from_tty)
- char *filename;
- int from_tty;
+nindy_load (char *filename, int from_tty)
{
asection *s;
/* Can't do unix style forking on a VMS system, so we'll use bfd to do
s->_raw_size,
s->vma);
ninMemPut (s->vma, buffer, s->_raw_size);
- free (buffer);
+ xfree (buffer);
}
}
bfd_close (file);
}
static int
-load_stub (arg)
- char *arg;
+load_stub (char *arg)
{
target_load (arg, 1);
return 1;
an i960 object file on the host system. */
void
-nindy_before_main_loop ()
+nindy_before_main_loop (void)
{
char ttyname[100];
char *p, *p2;
}
void
-_initialize_nindy ()
+_initialize_nindy (void)
{
init_nindy_ops ();
add_target (&nindy_ops);