- /* Remote debugging interface for boot monitors, for GDB.
- Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-/* This file was derived from remote-eb.c, which did a similar job, but for
- an AMD-29K running EBMON. That file was in turn derived from remote.c
- as mentioned in the following comment (left in for comic relief):
-
- "This is like remote.c but is for a different situation--
- having a PC running os9000 hook up with a unix machine with
- a serial line, and running ctty com2 on the PC. os9000 has a debug
- monitor called ROMBUG running. Not to mention that the PC
- has PC/NFS, so it can access the same executables that gdb can,
- over the net in real time."
-
- In reality, this module talks to a debug monitor called 'ROMBUG', which
- We communicate with ROMBUG via a direct serial line, the network version
- of ROMBUG is not available yet.
-*/
-
-#include "defs.h"
-#include "gdbcore.h"
-#include "target.h"
-#include "wait.h"
-#include <varargs.h>
-#include <signal.h>
-#include <string.h>
-#include <sys/types.h>
-#include "command.h"
-#include "serial.h"
-#include "monitor.h"
-#include "remote-utils.h"
-#include "symtab.h"
-#include "symfile.h"
-#include "objfiles.h"
-#include "gdb-stabs.h"
-
-#ifdef HAVE_TERMIO
-# define TERMINAL struct termios
-#else
-# define TERMINAL struct sgttyb
-#endif
-
-struct monitor_ops *current_monitor;
-struct cmd_list_element *showlist;
-extern struct target_ops rombug_ops; /* Forward declaration */
-extern struct monitor_ops rombug_cmds; /* Forward declaration */
-extern struct cmd_list_element *setlist;
-extern struct cmd_list_element *unsetlist;
-extern int attach_flag;
-
-static void rombug_close();
-static void rombug_fetch_register();
-static void rombug_fetch_registers();
-static void rombug_store_register();
-#if 0
-static int sr_get_debug(); /* flag set by "set remotedebug" */
-#endif
-static int hashmark; /* flag set by "set hash" */
-static int rombug_is_open = 0;
-
-/* FIXME: Replace with sr_get_debug (). */
-#define LOG_FILE "monitor.log"
-FILE *log_file;
-static int monitor_log = 0;
-
-static int timeout = 5;
-static int is_trace_mode = 0;
-/* Descriptor for I/O to remote machine. Initialize it to NULL*/
-static serial_t monitor_desc = NULL;
-
-/* Send data to monitor. Works just like printf. */
-static void
-printf_monitor(va_alist)
- va_dcl
-{
- va_list args;
- char *pattern;
- char buf[200];
- int i;
-
- va_start(args);
-
- pattern = va_arg(args, char *);
-
- vsprintf(buf, pattern, args);
-
- if (SERIAL_WRITE(monitor_desc, buf, strlen(buf)))
- fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno));
-}
-
-/* Read a character from the remote system, doing all the fancy timeout stuff*/
-static int
-readchar(timeout)
- int timeout;
-{
- int c;
-
- c = SERIAL_READCHAR(monitor_desc, timeout);
-
- if (sr_get_debug())
- putchar(c & 0x7f);
-
- if (monitor_log && isascii(c))
- putc(c & 0x7f, log_file);
-
- if (c >= 0)
- return c & 0x7f;
-
- if (c == SERIAL_TIMEOUT)
- {
- if (timeout == 0)
- return c; /* Polls shouldn't generate timeout errors */
-
- error("Timeout reading from remote system.");
- }
-
- perror_with_name("remote-monitor");
-}
-
-/* Scan input from the remote system, until STRING is found. If DISCARD is
- non-zero, then discard non-matching input, else print it out.
- Let the user break out immediately. */
-static void
-expect(string, discard)
- char *string;
- int discard;
-{
- char *p = string;
- int c;
-
- if (sr_get_debug())
- printf ("Expecting \"%s\"\n", string);
-
- immediate_quit = 1;
- while (1)
- {
- c = readchar(timeout);
- if (!isascii (c))
- continue;
- if (c == *p++)
- {
- if (*p == '\0')
- {
- immediate_quit = 0;
- if (sr_get_debug())
- printf ("\nMatched\n");
- return;
- }
- }
- else
- {
- if (!discard)
- {
- fwrite(string, 1, (p - 1) - string, stdout);
- putchar((char)c);
- fflush(stdout);
- }
- p = string;
- }
- }
-}
-
-/* Keep discarding input until we see the ROMBUG prompt.
-
- The convention for dealing with the prompt is that you
- o give your command
- o *then* wait for the prompt.
-
- Thus the last thing that a procedure does with the serial line
- will be an expect_prompt(). Exception: rombug_resume does not
- wait for the prompt, because the terminal is being handed over
- to the inferior. However, the next thing which happens after that
- is a rombug_wait which does wait for the prompt.
- Note that this includes abnormal exit, e.g. error(). This is
- necessary to prevent getting into states from which we can't
- recover. */
-static void
-expect_prompt(discard)
- int discard;
-{
- if (monitor_log)
- /* This is a convenient place to do this. The idea is to do it often
- enough that we never lose much data if we terminate abnormally. */
- fflush(log_file);
-
- if (is_trace_mode) {
- expect("trace", discard);
- is_trace_mode = 0;
- } else {
- expect (PROMPT, discard);
- }
-}
-
-/* Get a hex digit from the remote system & return its value.
- If ignore_space is nonzero, ignore spaces (not newline, tab, etc). */
-static int
-get_hex_digit(ignore_space)
- int ignore_space;
-{
- int ch;
- while (1)
- {
- ch = readchar(timeout);
- if (ch >= '0' && ch <= '9')
- return ch - '0';
- else if (ch >= 'A' && ch <= 'F')
- return ch - 'A' + 10;
- else if (ch >= 'a' && ch <= 'f')
- return ch - 'a' + 10;
- else if (ch == ' ' && ignore_space)
- ;
- else
- {
- expect_prompt(1);
- error("Invalid hex digit from remote system.");
- }
- }
-}
-
-/* Get a byte from monitor and put it in *BYT. Accept any number
- leading spaces. */
-static void
-get_hex_byte (byt)
- char *byt;
-{
- int val;
-
- val = get_hex_digit (1) << 4;
- val |= get_hex_digit (0);
- *byt = val;
-}
-
-/* Get N 32-bit words from remote, each preceded by a space,
- and put them in registers starting at REGNO. */
-static void
-get_hex_regs (n, regno)
- int n;
- int regno;
-{
- long val;
- int i;
- unsigned char b;
-
- for (i = 0; i < n; i++)
- {
- int j;
-
- val = 0;
- for (j = 0; j < 4; j++)
- {
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- get_hex_byte(&b);
- val = (val << 8) + b;
-#else
- get_hex_byte(&b);
- val = val + (b << (j*8));
-#endif
- }
- supply_register (regno++, (char *) &val);
- }
-}
-
-/* This is called not only when we first attach, but also when the
- user types "run" after having attached. */
-static void
-rombug_create_inferior (execfile, args, env)
- char *execfile;
- char *args;
- char **env;
-{
- int entry_pt;
-
- /* Nonzero value indicates that a process really is running. */
- inferior_pid = 9000;
-
- if (args && *args)
- error("Can't pass arguments to remote ROMBUG process");
-
- if (execfile == 0 || exec_bfd == 0)
- error("No exec file specified");
-
- entry_pt = (int) bfd_get_start_address (exec_bfd);
-
- if (monitor_log)
- fputs ("\nIn Create_inferior()", log_file);
-
-
-/* The "process" (board) is already stopped awaiting our commands, and
- the program is already downloaded. We just set its PC and go. */
-
- init_wait_for_inferior ();
- proceed ((CORE_ADDR)entry_pt, TARGET_SIGNAL_DEFAULT, 0);
-}
-
-/* Open a connection to a remote debugger.
- NAME is the filename used for communication. */
-
-static char dev_name[100];
-
-static void
-rombug_open(args, from_tty)
- char *args;
- int from_tty;
-{
- if (args == NULL)
- error ("Use `target RomBug DEVICE-NAME' to use a serial port, or \n\
-`target RomBug HOST-NAME:PORT-NUMBER' to use a network connection.");
-
- target_preopen(from_tty);
-
- if (rombug_is_open)
- unpush_target(&rombug_ops);
-
- strcpy(dev_name, args);
- monitor_desc = SERIAL_OPEN(dev_name);
- if (monitor_desc == NULL)
- perror_with_name(dev_name);
-
- /* if baud rate is set by 'set remotebaud' */
- if (SERIAL_SETBAUDRATE (monitor_desc, sr_get_baud_rate()))
- {
- SERIAL_CLOSE (monitor_desc);
- perror_with_name ("RomBug");
- }
- SERIAL_RAW(monitor_desc);
-
- rombug_is_open = 1;
-
- log_file = fopen (LOG_FILE, "w");
- if (log_file == NULL)
- perror_with_name (LOG_FILE);
-
- push_monitor (&rombug_cmds);
- printf_monitor("\r"); /* CR wakes up monitor */
- expect_prompt(1);
-
- push_target (&rombug_ops);
- if (from_tty)
- printf("Remote %s connected to %s\n", target_shortname,
- dev_name);
-
- attach_flag = 1;
- inferior_pid = 9000;
- rombug_fetch_registers();
-}
-
-/*
- * Close out all files and local state before this target loses control.
- */
-
-static void
-rombug_close (quitting)
- int quitting;
-{
- if (rombug_is_open) {
- SERIAL_CLOSE(monitor_desc);
- monitor_desc = NULL;
- rombug_is_open = 0;
- }
-
- if (log_file) {
- if (ferror(log_file))
- fprintf(stderr, "Error writing log file.\n");
- if (fclose(log_file) != 0)
- fprintf(stderr, "Error closing log file.\n");
- log_file = 0;
- }
-}
-
-int
-rombug_link(mod_name, text_reloc)
- char *mod_name;
- CORE_ADDR *text_reloc;
-{
- int i, j;
- unsigned long val;
- unsigned char b;
-
- printf_monitor("l %s \r", mod_name);
- expect_prompt(1);
- printf_monitor(".r \r");
- expect(REG_DELIM, 1);
- for (i=0; i <= 7; i++)
- {
- val = 0;
- for (j = 0; j < 4; j++)
- {
- get_hex_byte(&b);
- val = (val << 8) + b;
- }
- }
- expect_prompt(1);
- *text_reloc = val;
- return 1;
-}
-
-/* Terminate the open connection to the remote debugger.
- Use this when you want to detach and do something else
- with your gdb. */
-static void
-rombug_detach (from_tty)
- int from_tty;
-{
- if (attach_flag) {
- printf_monitor (GO_CMD);
- attach_flag = 0;
- inferior_pid = 0;
- }
- pop_target(); /* calls rombug_close to do the real work */
- if (from_tty)
- printf ("Ending remote %s debugging\n", target_shortname);
-}
-
-/*
- * Tell the remote machine to resume.
- */
-static void
-rombug_resume (pid, step, sig)
- int pid, step;
- enum target_signal sig;
-{
- if (monitor_log)
- fprintf (log_file, "\nIn Resume (step=%d, sig=%d)\n", step, sig);
-
- if (step)
- {
- is_trace_mode = 1;
- printf_monitor (STEP_CMD);
- /* wait for the echo. */
- expect (STEP_CMD, 1);
- }
- else
- {
- printf_monitor (GO_CMD);
- /* swallow the echo. */
- expect (GO_CMD, 1);
- }
-}
-
-/*
- * Wait until the remote machine stops, then return,
- * storing status in status just as `wait' would.
- */
-
-static int
-rombug_wait (pid, status)
- int pid;
- struct target_waitstatus *status;
-{
- int old_timeout = timeout;
- struct section_offsets *offs;
- CORE_ADDR addr, pc;
- struct obj_section *obj_sec;
-
- if (monitor_log)
- fputs ("\nIn wait ()", log_file);
-
- status->kind = TARGET_WAITKIND_EXITED;
- status->value.integer = 0;
-
- timeout = 0; /* Don't time out -- user program is running. */
- expect_prompt(1); /* Wait for prompt, outputting extraneous text */
-
- status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = TARGET_SIGNAL_TRAP;
- timeout = old_timeout;
- rombug_fetch_registers();
- pc = read_register(PC_REGNUM);
- addr = read_register(DATABASE_REG);
- obj_sec = find_pc_section (pc);
- if (obj_sec != NULL)
- {
- if (obj_sec->objfile != symfile_objfile)
- new_symfile_objfile(obj_sec->objfile, 1, 0);
- offs = ((struct section_offsets *)
- alloca (sizeof (struct section_offsets)
- + (symfile_objfile->num_sections * sizeof (offs->offsets))));
- memcpy (offs, symfile_objfile->section_offsets,
- (sizeof (struct section_offsets) +
- (symfile_objfile->num_sections * sizeof (offs->offsets))));
- ANOFFSET (offs, SECT_OFF_DATA) = addr;
- ANOFFSET (offs, SECT_OFF_BSS) = addr;
-
- objfile_relocate(symfile_objfile, offs);
- }
- return 0;
-}
-
-/* Return the name of register number regno in the form input and output by
- monitor. Currently, register_names just happens to contain exactly what
- monitor wants. Lets take advantage of that just as long as possible! */
-
-static char *
-get_reg_name (regno)
- int regno;
-{
- static char buf[50];
- char *p;
- char *b;
-
- b = buf;
-
- if (regno < 0)
- return ("");
-/*
- for (p = reg_names[regno]; *p; p++)
- *b++ = toupper(*p);
- *b = '\000';
-*/
- p = (char *)reg_names[regno];
- return p;
-/*
- return buf;
-*/
-}
-
-/* read the remote registers into the block regs. */
-
-static void
-rombug_fetch_registers ()
-{
- int regno, j, i;
- long val;
- unsigned char b;
-
- printf_monitor (GET_REG);
- expect("eax:", 1);
- expect("\n", 1);
- get_hex_regs(1, 0);
- get_hex_regs(1, 3);
- get_hex_regs(1, 1);
- get_hex_regs(1, 2);
- get_hex_regs(1, 6);
- get_hex_regs(1, 7);
- get_hex_regs(1, 5);
- get_hex_regs(1, 4);
- for (regno = 8; regno <= 15; regno++)
- {
- expect(REG_DELIM, 1);
- if (regno >= 8 && regno <= 13)
- {
- val = 0;
- for (j = 0; j < 2; j++)
- {
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- get_hex_byte(&b);
- val = (val << 8) + b;
-#else
- get_hex_byte(&b);
- val = val + (b << (j*8));
-#endif
- }
-
- if (regno == 8) i = 10;
- if (regno >= 9 && regno <= 12) i = regno + 3;
- if (regno == 13) i = 11;
- supply_register (i, (char *) &val);
- }
- else if (regno == 14)
- {
- get_hex_regs(1, PC_REGNUM);
- }
- else if (regno == 15)
- {
- get_hex_regs(1, 9);
- }
- else
- {
- val = 0;
- supply_register(regno, (char *) &val);
- }
- }
- expect_prompt (1);
-}
-
-/* Fetch register REGNO, or all registers if REGNO is -1.
- Returns errno value. */
-static void
-rombug_fetch_register (regno)
- int regno;
-{
- int val, j;
- unsigned char b;
-
- if (monitor_log) {
- fprintf (log_file, "\nIn Fetch Register (reg=%s)\n", get_reg_name (regno));
- fflush (log_file);
- }
-
- if (regno < 0)
- {
- rombug_fetch_registers ();
- }
- else
- {
- char *name = get_reg_name (regno);
- printf_monitor (GET_REG);
- if (regno >= 10 && regno <= 15)
- {
- expect ("\n", 1);
- expect ("\n", 1);
- expect (name, 1);
- expect (REG_DELIM, 1);
- val = 0;
- for (j = 0; j < 2; j++)
- {
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- get_hex_byte(&b);
- val = (val << 8) + b;
-#else
- get_hex_byte(&b);
- val = val + (b << (j*8));
-#endif
- }
- supply_register (regno, (char *) &val);
- }
- else if (regno == 8 || regno == 9)
- {
- expect ("\n", 1);
- expect ("\n", 1);
- expect ("\n", 1);
- expect (name, 1);
- expect (REG_DELIM, 1);
- get_hex_regs (1, regno);
- }
- else
- {
- expect (name, 1);
- expect (REG_DELIM, 1);
- expect("\n", 1);
- get_hex_regs(1, 0);
- get_hex_regs(1, 3);
- get_hex_regs(1, 1);
- get_hex_regs(1, 2);
- get_hex_regs(1, 6);
- get_hex_regs(1, 7);
- get_hex_regs(1, 5);
- get_hex_regs(1, 4);
- }
- expect_prompt (1);
- }
- return;
-}
-
-/* Store the remote registers from the contents of the block REGS. */
-
-static void
-rombug_store_registers ()
-{
- int regno;
-
- for (regno = 0; regno <= PC_REGNUM; regno++)
- rombug_store_register(regno);
-
- registers_changed ();
-}
-
-/* Store register REGNO, or all if REGNO == 0.
- return errno value. */
-static void
-rombug_store_register (regno)
- int regno;
-{
-char *name;
-
- if (monitor_log)
- fprintf (log_file, "\nIn Store_register (regno=%d)\n", regno);
-
- if (regno == -1)
- rombug_store_registers ();
- else
- {
- if (sr_get_debug())
- printf ("Setting register %s to 0x%x\n", get_reg_name (regno), read_register (regno));
-
- name = get_reg_name(regno);
- if (name == 0) return;
- printf_monitor (SET_REG, name, read_register (regno));
-
- expect_prompt (1);
- }
-}
-
-/* Get ready to modify the registers array. On machines which store
- individual registers, this doesn't need to do anything. On machines
- which store all the registers in one fell swoop, this makes sure
- that registers contains all the registers from the program being
- debugged. */
-
-static void
-rombug_prepare_to_store ()
-{
- /* Do nothing, since we can store individual regs */
-}
-
-static void
-rombug_files_info ()
-{
- printf ("\tAttached to %s at %d baud.\n",
- dev_name, sr_get_baud_rate());
-}
-
-/* Copy LEN bytes of data from debugger memory at MYADDR
- to inferior's memory at MEMADDR. Returns length moved. */
-static int
-rombug_write_inferior_memory (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- unsigned char *myaddr;
- int len;
-{
- int i;
- char buf[10];
-
- if (monitor_log)
- fprintf (log_file, "\nIn Write_inferior_memory (memaddr=%x, len=%d)\n", memaddr, len);
-
- printf_monitor (MEM_SET_CMD, memaddr);
- for (i = 0; i < len; i++)
- {
- expect (CMD_DELIM, 1);
- printf_monitor ("%x \r", myaddr[i]);
- if (sr_get_debug())
- printf ("\nSet 0x%x to 0x%x\n", memaddr + i, myaddr[i]);
- }
- expect (CMD_DELIM, 1);
- if (CMD_END)
- printf_monitor (CMD_END);
- expect_prompt (1);
-
- return len;
-}
-
-/* Read LEN bytes from inferior memory at MEMADDR. Put the result
- at debugger address MYADDR. Returns length moved. */
-static int
-rombug_read_inferior_memory(memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
-{
- int i, j;
- char buf[20];
-
- /* Number of bytes read so far. */
- int count;
-
- /* Starting address of this pass. */
- unsigned long startaddr;
-
- /* Number of bytes to read in this pass. */
- int len_this_pass;
-
- if (monitor_log)
- fprintf (log_file, "\nIn Read_inferior_memory (memaddr=%x, len=%d)\n", memaddr, len);
-
- /* Note that this code works correctly if startaddr is just less
- than UINT_MAX (well, really CORE_ADDR_MAX if there was such a
- thing). That is, something like
- rombug_read_bytes (CORE_ADDR_MAX - 4, foo, 4)
- works--it never adds len To memaddr and gets 0. */
- /* However, something like
- rombug_read_bytes (CORE_ADDR_MAX - 3, foo, 4)
- doesn't need to work. Detect it and give up if there's an attempt
- to do that. */
- if (((memaddr - 1) + len) < memaddr) {
- errno = EIO;
- return 0;
- }
-
- startaddr = memaddr;
- count = 0;
- while (count < len)
- {
- len_this_pass = 16;
- if ((startaddr % 16) != 0)
- len_this_pass -= startaddr % 16;
- if (len_this_pass > (len - count))
- len_this_pass = (len - count);
- if (sr_get_debug())
- printf ("\nDisplay %d bytes at %x\n", len_this_pass, startaddr);
-
- printf_monitor (MEM_DIS_CMD, startaddr, 16);
- expect ("- ", 1);
- for (i = 0; i < len_this_pass; i++)
- {
- get_hex_byte (&myaddr[count++]);
- if (sr_get_debug())
- printf ("\nRead a 0x%x from 0x%x\n", myaddr[count-1], startaddr);
- startaddr += 1;
- }
- expect(CMD_DELIM, 1);
- }
- if (CMD_END)
- printf_monitor (CMD_END);
- expect_prompt (1);
-
- return len;
-}
-
-/* FIXME-someday! merge these two. */
-static int
-rombug_xfer_inferior_memory (memaddr, myaddr, len, write, target)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
- int write;
- struct target_ops *target; /* ignored */
-{
- if (write)
- return rombug_write_inferior_memory (memaddr, myaddr, len);
- else
- return rombug_read_inferior_memory (memaddr, myaddr, len);
-}
-
-static void
-rombug_kill (args, from_tty)
- char *args;
- int from_tty;
-{
- return; /* ignore attempts to kill target system */
-}
-
-/* Clean up when a program exits.
- The program actually lives on in the remote processor's RAM, and may be
- run again without a download. Don't leave it full of breakpoint
- instructions. */
-
-static void
-rombug_mourn_inferior ()
-{
- remove_breakpoints ();
- generic_mourn_inferior (); /* Do all the proper things now */
-}
-
-#define MAX_MONITOR_BREAKPOINTS 16
-
-extern int memory_breakpoint_size;
-static CORE_ADDR breakaddr[MAX_MONITOR_BREAKPOINTS] = {0};
-
-static int
-rombug_insert_breakpoint (addr, shadow)
- CORE_ADDR addr;
- char *shadow;
-{
- int i;
-
- if (monitor_log)
- fprintf (log_file, "\nIn Insert_breakpoint (addr=%x)\n", addr);
-
- for (i = 0; i <= MAX_MONITOR_BREAKPOINTS; i++)
- if (breakaddr[i] == 0)
- {
- breakaddr[i] = addr;
- if (sr_get_debug())
- printf ("Breakpoint at %x\n", addr);
- rombug_read_inferior_memory(addr, shadow, memory_breakpoint_size);
- printf_monitor(SET_BREAK_CMD, addr);
- expect_prompt(1);
- return 0;
- }
-
- fprintf(stderr, "Too many breakpoints (> 16) for monitor\n");
- return 1;
-}
-
-/*
- * _remove_breakpoint -- Tell the monitor to remove a breakpoint
- */
-static int
-rombug_remove_breakpoint (addr, shadow)
- CORE_ADDR addr;
- char *shadow;
-{
- int i;
-
- if (monitor_log)
- fprintf (log_file, "\nIn Remove_breakpoint (addr=%x)\n", addr);
-
- for (i = 0; i < MAX_MONITOR_BREAKPOINTS; i++)
- if (breakaddr[i] == addr)
- {
- breakaddr[i] = 0;
- printf_monitor(CLR_BREAK_CMD, addr);
- expect_prompt(1);
- return 0;
- }
-
- fprintf(stderr, "Can't find breakpoint associated with 0x%x\n", addr);
- return 1;
-}
-
-/* Load a file. This is usually an srecord, which is ascii. No
- protocol, just sent line by line. */
-
-#define DOWNLOAD_LINE_SIZE 100
-static void
-rombug_load (arg)
- char *arg;
-{
-/* this part comment out for os9* */
-#if 0
- FILE *download;
- char buf[DOWNLOAD_LINE_SIZE];
- int i, bytes_read;
-
- if (sr_get_debug())
- printf ("Loading %s to monitor\n", arg);
-
- download = fopen (arg, "r");
- if (download == NULL)
- {
- error (sprintf (buf, "%s Does not exist", arg));
- return;
- }
-
- printf_monitor (LOAD_CMD);
-/* expect ("Waiting for S-records from host... ", 1); */
-
- while (!feof (download))
- {
- bytes_read = fread (buf, sizeof (char), DOWNLOAD_LINE_SIZE, download);
- if (hashmark)
- {
- putchar ('.');
- fflush (stdout);
- }
-
- if (SERIAL_WRITE(monitor_desc, buf, bytes_read)) {
- fprintf(stderr, "SERIAL_WRITE failed: (while downloading) %s\n", safe_strerror(errno));
- break;
- }
- i = 0;
- while (i++ <=200000) {} ; /* Ugly HACK, probably needs flow control */
- if (bytes_read < DOWNLOAD_LINE_SIZE)
- {
- if (!feof (download))
- error ("Only read %d bytes\n", bytes_read);
- break;
- }
- }
-
- if (hashmark)
- {
- putchar ('\n');
- }
- if (!feof (download))
- error ("Never got EOF while downloading");
- fclose (download);
-#endif 0
-}
-
-/* Put a command string, in args, out to MONITOR.
- Output from MONITOR is placed on the users terminal until the prompt
- is seen. */
-
-static void
-rombug_command (args, fromtty)
- char *args;
- int fromtty;
-{
- if (monitor_desc == NULL)
- error("monitor target not open.");
-
- if (monitor_log)
- fprintf (log_file, "\nIn command (args=%s)\n", args);
-
- if (!args)
- error("Missing command.");
-
- printf_monitor("%s\r", args);
- expect(CMD_DELIM, 0);
-}
-
-#if 0
-/* Connect the user directly to MONITOR. This command acts just like the
- 'cu' or 'tip' command. Use <CR>~. or <CR>~^D to break out. */
-
-static struct ttystate ttystate;
-
-static void
-cleanup_tty()
-{ printf("\r\n[Exiting connect mode]\r\n");
- /*SERIAL_RESTORE(0, &ttystate);*/
-}
-
-static void
-connect_command (args, fromtty)
- char *args;
- int fromtty;
-{
- fd_set readfds;
- int numfds;
- int c;
- char cur_esc = 0;
-
- dont_repeat();
-
- if (monitor_desc == NULL)
- error("monitor target not open.");
-
- if (args)
- fprintf("This command takes no args. They have been ignored.\n");
-
- printf("[Entering connect mode. Use ~. or ~^D to escape]\n");
-
- serial_raw(0, &ttystate);
-
- make_cleanup(cleanup_tty, 0);
-
- FD_ZERO(&readfds);
-
- while (1)
- {
- do
- {
- FD_SET(0, &readfds);
- FD_SET(monitor_desc, &readfds);
- numfds = select(sizeof(readfds)*8, &readfds, 0, 0, 0);
- }
- while (numfds == 0);
-
- if (numfds < 0)
- perror_with_name("select");
-
- if (FD_ISSET(0, &readfds))
- { /* tty input, send to monitor */
- c = getchar();
- if (c < 0)
- perror_with_name("connect");
-
- printf_monitor("%c", c);
- switch (cur_esc)
- {
- case 0:
- if (c == '\r')
- cur_esc = c;
- break;
- case '\r':
- if (c == '~')
- cur_esc = c;
- else
- cur_esc = 0;
- break;
- case '~':
- if (c == '.' || c == '\004')
- return;
- else
- cur_esc = 0;
- }
- }
-
- if (FD_ISSET(monitor_desc, &readfds))
- {
- while (1)
- {
- c = readchar(0);
- if (c < 0)
- break;
- putchar(c);
- }
- fflush(stdout);
- }
- }
-}
-#endif
-
-/*
- * Define the monitor command strings. Since these are passed directly
- * through to a printf style function, we need can include formatting
- * strings. We also need a CR or LF on the end.
- */
-struct monitor_ops rombug_cmds = {
- "g \r", /* execute or usually GO command */
- "g \r", /* continue command */
- "t \r", /* single step */
- "b %x\r", /* set a breakpoint */
- "k %x\r", /* clear a breakpoint */
- "c %x\r", /* set memory to a value */
- "d %x %d\r", /* display memory */
- "$%08X", /* prompt memory commands use */
- ".%s %x\r", /* set a register */
- ":", /* delimiter between registers */
- ". \r", /* read a register */
- "mf \r", /* download command */
- "RomBug: ", /* monitor command prompt */
- ": ", /* end-of-command delimitor */
- ".\r" /* optional command terminator */
-};
-
-struct target_ops rombug_ops = {
- "rombug",
- "Microware's ROMBUG debug monitor",
- "Use a remote computer running the ROMBUG debug monitor.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).",
- rombug_open,
- rombug_close,
- 0,
- rombug_detach,
- rombug_resume,
- rombug_wait,
- rombug_fetch_register,
- rombug_store_register,
- rombug_prepare_to_store,
- rombug_xfer_inferior_memory,
- rombug_files_info,
- rombug_insert_breakpoint,
- rombug_remove_breakpoint, /* Breakpoints */
- 0,
- 0,
- 0,
- 0,
- 0, /* Terminal handling */
- rombug_kill,
- rombug_load, /* load */
- rombug_link, /* lookup_symbol */
- rombug_create_inferior,
- rombug_mourn_inferior,
- 0, /* can_run */
- 0, /* notice_signals */
- process_stratum,
- 0, /* next */
- 1,
- 1,
- 1,
- 1,
- 1, /* has execution */
- 0,
- 0, /* Section pointers */
- OPS_MAGIC, /* Always the last thing */
-};
-
-void
-_initialize_remote_os9k ()
-{
- add_target (&rombug_ops);
-
- add_show_from_set (
- add_set_cmd ("hash", no_class, var_boolean, (char *)&hashmark,
- "Set display of activity while downloading a file.\nWhen enabled, a period \'.\' is displayed.",
- &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("timeout", no_class, var_zinteger,
- (char *) &timeout,
- "Set timeout in seconds for remote MIPS serial I/O.",
- &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("monitor_log", no_class, var_zinteger,
- (char *) &monitor_log,
- "Set monitor activity log on(=1) or off(=0).",
- &setlist),
- &showlist);
-
-
- add_com ("rombug <command>", class_obscure, rombug_command,
- "Send a command to the debug monitor.");
-#if 0
- add_com ("connect", class_obscure, connect_command,
- "Connect the terminal directly up to a serial based command monitor.\nUse <CR>~. or <CR>~^D to break out.");
-#endif
-}
+// OBSOLETE /* Remote debugging interface for boot monitors, for GDB.
+// OBSOLETE
+// OBSOLETE Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999,
+// OBSOLETE 2000, 2001, 2002 Free Software Foundation, Inc.
+// OBSOLETE
+// OBSOLETE This file is part of GDB.
+// OBSOLETE
+// OBSOLETE This program is free software; you can redistribute it and/or modify
+// OBSOLETE it under the terms of the GNU General Public License as published by
+// OBSOLETE the Free Software Foundation; either version 2 of the License, or
+// OBSOLETE (at your option) any later version.
+// OBSOLETE
+// OBSOLETE This program is distributed in the hope that it will be useful,
+// OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of
+// OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// OBSOLETE GNU General Public License for more details.
+// OBSOLETE
+// OBSOLETE You should have received a copy of the GNU General Public License
+// OBSOLETE along with this program; if not, write to the Free Software
+// OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330,
+// OBSOLETE Boston, MA 02111-1307, USA. */
+// OBSOLETE
+// OBSOLETE /* This file was derived from remote-eb.c, which did a similar job, but for
+// OBSOLETE an AMD-29K running EBMON. That file was in turn derived from remote.c
+// OBSOLETE as mentioned in the following comment (left in for comic relief):
+// OBSOLETE
+// OBSOLETE "This is like remote.c but is for a different situation--
+// OBSOLETE having a PC running os9000 hook up with a unix machine with
+// OBSOLETE a serial line, and running ctty com2 on the PC. os9000 has a debug
+// OBSOLETE monitor called ROMBUG running. Not to mention that the PC
+// OBSOLETE has PC/NFS, so it can access the same executables that gdb can,
+// OBSOLETE over the net in real time."
+// OBSOLETE
+// OBSOLETE In reality, this module talks to a debug monitor called 'ROMBUG', which
+// OBSOLETE We communicate with ROMBUG via a direct serial line, the network version
+// OBSOLETE of ROMBUG is not available yet.
+// OBSOLETE */
+// OBSOLETE
+// OBSOLETE /* FIXME This file needs to be rewritten if it's to work again, either
+// OBSOLETE to self-contained or to use the new monitor interface. */
+// OBSOLETE
+// OBSOLETE #include "defs.h"
+// OBSOLETE #include "gdbcore.h"
+// OBSOLETE #include "target.h"
+// OBSOLETE #include "gdb_string.h"
+// OBSOLETE #include <sys/types.h>
+// OBSOLETE #include "command.h"
+// OBSOLETE #include "serial.h"
+// OBSOLETE #include "monitor.h"
+// OBSOLETE #include "remote-utils.h"
+// OBSOLETE #include "symtab.h"
+// OBSOLETE #include "symfile.h"
+// OBSOLETE #include "objfiles.h"
+// OBSOLETE #include "gdb-stabs.h"
+// OBSOLETE #include "regcache.h"
+// OBSOLETE
+// OBSOLETE struct cmd_list_element *showlist;
+// OBSOLETE extern struct target_ops rombug_ops; /* Forward declaration */
+// OBSOLETE extern struct monitor_ops rombug_cmds; /* Forward declaration */
+// OBSOLETE extern struct cmd_list_element *setlist;
+// OBSOLETE extern struct cmd_list_element *unsetlist;
+// OBSOLETE extern int attach_flag;
+// OBSOLETE
+// OBSOLETE static void rombug_close ();
+// OBSOLETE static void rombug_fetch_register ();
+// OBSOLETE static void rombug_fetch_registers ();
+// OBSOLETE static void rombug_store_register ();
+// OBSOLETE #if 0
+// OBSOLETE static int sr_get_debug (); /* flag set by "set remotedebug" */
+// OBSOLETE #endif
+// OBSOLETE static int hashmark; /* flag set by "set hash" */
+// OBSOLETE static int rombug_is_open = 0;
+// OBSOLETE
+// OBSOLETE /* FIXME: Replace with sr_get_debug (). */
+// OBSOLETE #define LOG_FILE "monitor.log"
+// OBSOLETE FILE *log_file;
+// OBSOLETE static int monitor_log = 0;
+// OBSOLETE static int tty_xon = 0;
+// OBSOLETE static int tty_xoff = 0;
+// OBSOLETE
+// OBSOLETE static int timeout = 10;
+// OBSOLETE static int is_trace_mode = 0;
+// OBSOLETE /* Descriptor for I/O to remote machine. Initialize it to NULL */
+// OBSOLETE static struct serial *monitor_desc = NULL;
+// OBSOLETE
+// OBSOLETE static CORE_ADDR bufaddr = 0;
+// OBSOLETE static int buflen = 0;
+// OBSOLETE static char readbuf[16];
+// OBSOLETE
+// OBSOLETE /* Send data to monitor. Works just like printf. */
+// OBSOLETE static void
+// OBSOLETE printf_monitor (char *pattern,...)
+// OBSOLETE {
+// OBSOLETE va_list args;
+// OBSOLETE char buf[200];
+// OBSOLETE int i;
+// OBSOLETE
+// OBSOLETE va_start (args, pattern);
+// OBSOLETE
+// OBSOLETE vsprintf (buf, pattern, args);
+// OBSOLETE va_end (args);
+// OBSOLETE
+// OBSOLETE if (serial_write (monitor_desc, buf, strlen (buf)))
+// OBSOLETE fprintf_unfiltered (gdb_stderr, "serial_write failed: %s\n",
+// OBSOLETE safe_strerror (errno));
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Read a character from the remote system, doing all the fancy timeout stuff */
+// OBSOLETE static int
+// OBSOLETE readchar (int timeout)
+// OBSOLETE {
+// OBSOLETE int c;
+// OBSOLETE
+// OBSOLETE c = serial_readchar (monitor_desc, timeout);
+// OBSOLETE
+// OBSOLETE if (sr_get_debug ())
+// OBSOLETE putchar (c & 0x7f);
+// OBSOLETE
+// OBSOLETE if (monitor_log && isascii (c))
+// OBSOLETE putc (c & 0x7f, log_file);
+// OBSOLETE
+// OBSOLETE if (c >= 0)
+// OBSOLETE return c & 0x7f;
+// OBSOLETE
+// OBSOLETE if (c == SERIAL_TIMEOUT)
+// OBSOLETE {
+// OBSOLETE if (timeout == 0)
+// OBSOLETE return c; /* Polls shouldn't generate timeout errors */
+// OBSOLETE
+// OBSOLETE error ("Timeout reading from remote system.");
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE perror_with_name ("remote-monitor");
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Scan input from the remote system, until STRING is found. If DISCARD is
+// OBSOLETE non-zero, then discard non-matching input, else print it out.
+// OBSOLETE Let the user break out immediately. */
+// OBSOLETE static void
+// OBSOLETE expect (char *string, int discard)
+// OBSOLETE {
+// OBSOLETE char *p = string;
+// OBSOLETE int c;
+// OBSOLETE
+// OBSOLETE if (sr_get_debug ())
+// OBSOLETE printf ("Expecting \"%s\"\n", string);
+// OBSOLETE
+// OBSOLETE immediate_quit++;
+// OBSOLETE while (1)
+// OBSOLETE {
+// OBSOLETE c = readchar (timeout);
+// OBSOLETE if (!isascii (c))
+// OBSOLETE continue;
+// OBSOLETE if (c == *p++)
+// OBSOLETE {
+// OBSOLETE if (*p == '\0')
+// OBSOLETE {
+// OBSOLETE immediate_quit--;
+// OBSOLETE if (sr_get_debug ())
+// OBSOLETE printf ("\nMatched\n");
+// OBSOLETE return;
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE else
+// OBSOLETE {
+// OBSOLETE if (!discard)
+// OBSOLETE {
+// OBSOLETE fwrite (string, 1, (p - 1) - string, stdout);
+// OBSOLETE putchar ((char) c);
+// OBSOLETE fflush (stdout);
+// OBSOLETE }
+// OBSOLETE p = string;
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Keep discarding input until we see the ROMBUG prompt.
+// OBSOLETE
+// OBSOLETE The convention for dealing with the prompt is that you
+// OBSOLETE o give your command
+// OBSOLETE o *then* wait for the prompt.
+// OBSOLETE
+// OBSOLETE Thus the last thing that a procedure does with the serial line
+// OBSOLETE will be an expect_prompt(). Exception: rombug_resume does not
+// OBSOLETE wait for the prompt, because the terminal is being handed over
+// OBSOLETE to the inferior. However, the next thing which happens after that
+// OBSOLETE is a rombug_wait which does wait for the prompt.
+// OBSOLETE Note that this includes abnormal exit, e.g. error(). This is
+// OBSOLETE necessary to prevent getting into states from which we can't
+// OBSOLETE recover. */
+// OBSOLETE static void
+// OBSOLETE expect_prompt (int discard)
+// OBSOLETE {
+// OBSOLETE if (monitor_log)
+// OBSOLETE /* This is a convenient place to do this. The idea is to do it often
+// OBSOLETE enough that we never lose much data if we terminate abnormally. */
+// OBSOLETE fflush (log_file);
+// OBSOLETE
+// OBSOLETE if (is_trace_mode)
+// OBSOLETE {
+// OBSOLETE expect ("trace", discard);
+// OBSOLETE }
+// OBSOLETE else
+// OBSOLETE {
+// OBSOLETE expect (PROMPT, discard);
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Get a hex digit from the remote system & return its value.
+// OBSOLETE If ignore_space is nonzero, ignore spaces (not newline, tab, etc). */
+// OBSOLETE static int
+// OBSOLETE get_hex_digit (int ignore_space)
+// OBSOLETE {
+// OBSOLETE int ch;
+// OBSOLETE while (1)
+// OBSOLETE {
+// OBSOLETE ch = readchar (timeout);
+// OBSOLETE if (ch >= '0' && ch <= '9')
+// OBSOLETE return ch - '0';
+// OBSOLETE else if (ch >= 'A' && ch <= 'F')
+// OBSOLETE return ch - 'A' + 10;
+// OBSOLETE else if (ch >= 'a' && ch <= 'f')
+// OBSOLETE return ch - 'a' + 10;
+// OBSOLETE else if (ch == ' ' && ignore_space)
+// OBSOLETE ;
+// OBSOLETE else
+// OBSOLETE {
+// OBSOLETE expect_prompt (1);
+// OBSOLETE error ("Invalid hex digit from remote system.");
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Get a byte from monitor and put it in *BYT. Accept any number
+// OBSOLETE leading spaces. */
+// OBSOLETE static void
+// OBSOLETE get_hex_byte (char *byt)
+// OBSOLETE {
+// OBSOLETE int val;
+// OBSOLETE
+// OBSOLETE val = get_hex_digit (1) << 4;
+// OBSOLETE val |= get_hex_digit (0);
+// OBSOLETE *byt = val;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Get N 32-bit words from remote, each preceded by a space,
+// OBSOLETE and put them in registers starting at REGNO. */
+// OBSOLETE static void
+// OBSOLETE get_hex_regs (int n, int regno)
+// OBSOLETE {
+// OBSOLETE long val;
+// OBSOLETE int i;
+// OBSOLETE unsigned char b;
+// OBSOLETE
+// OBSOLETE for (i = 0; i < n; i++)
+// OBSOLETE {
+// OBSOLETE int j;
+// OBSOLETE
+// OBSOLETE val = 0;
+// OBSOLETE for (j = 0; j < 4; j++)
+// OBSOLETE {
+// OBSOLETE get_hex_byte (&b);
+// OBSOLETE if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+// OBSOLETE val = (val << 8) + b;
+// OBSOLETE else
+// OBSOLETE val = val + (b << (j * 8));
+// OBSOLETE }
+// OBSOLETE supply_register (regno++, (char *) &val);
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* This is called not only when we first attach, but also when the
+// OBSOLETE user types "run" after having attached. */
+// OBSOLETE static void
+// OBSOLETE rombug_create_inferior (char *execfile, char *args, char **env)
+// OBSOLETE {
+// OBSOLETE int entry_pt;
+// OBSOLETE
+// OBSOLETE if (args && *args)
+// OBSOLETE error ("Can't pass arguments to remote ROMBUG process");
+// OBSOLETE
+// OBSOLETE if (execfile == 0 || exec_bfd == 0)
+// OBSOLETE error ("No executable file specified");
+// OBSOLETE
+// OBSOLETE entry_pt = (int) bfd_get_start_address (exec_bfd);
+// OBSOLETE
+// OBSOLETE if (monitor_log)
+// OBSOLETE fputs ("\nIn Create_inferior()", log_file);
+// OBSOLETE
+// OBSOLETE
+// OBSOLETE /* The "process" (board) is already stopped awaiting our commands, and
+// OBSOLETE the program is already downloaded. We just set its PC and go. */
+// OBSOLETE
+// OBSOLETE init_wait_for_inferior ();
+// OBSOLETE proceed ((CORE_ADDR) entry_pt, TARGET_SIGNAL_DEFAULT, 0);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Open a connection to a remote debugger.
+// OBSOLETE NAME is the filename used for communication. */
+// OBSOLETE
+// OBSOLETE static char dev_name[100];
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE rombug_open (char *args, int from_tty)
+// OBSOLETE {
+// OBSOLETE if (args == NULL)
+// OBSOLETE error ("Use `target RomBug DEVICE-NAME' to use a serial port, or \n\
+// OBSOLETE `target RomBug HOST-NAME:PORT-NUMBER' to use a network connection.");
+// OBSOLETE
+// OBSOLETE target_preopen (from_tty);
+// OBSOLETE
+// OBSOLETE if (rombug_is_open)
+// OBSOLETE unpush_target (&rombug_ops);
+// OBSOLETE
+// OBSOLETE strcpy (dev_name, args);
+// OBSOLETE monitor_desc = serial_open (dev_name);
+// OBSOLETE if (monitor_desc == NULL)
+// OBSOLETE perror_with_name (dev_name);
+// OBSOLETE
+// OBSOLETE /* if baud rate is set by 'set remotebaud' */
+// OBSOLETE if (serial_setbaudrate (monitor_desc, sr_get_baud_rate ()))
+// OBSOLETE {
+// OBSOLETE serial_close (monitor_desc);
+// OBSOLETE perror_with_name ("RomBug");
+// OBSOLETE }
+// OBSOLETE serial_raw (monitor_desc);
+// OBSOLETE if (tty_xon || tty_xoff)
+// OBSOLETE {
+// OBSOLETE struct hardware_ttystate
+// OBSOLETE {
+// OBSOLETE struct termios t;
+// OBSOLETE }
+// OBSOLETE *tty_s;
+// OBSOLETE
+// OBSOLETE tty_s = (struct hardware_ttystate *) serial_get_tty_state (monitor_desc);
+// OBSOLETE if (tty_xon)
+// OBSOLETE tty_s->t.c_iflag |= IXON;
+// OBSOLETE if (tty_xoff)
+// OBSOLETE tty_s->t.c_iflag |= IXOFF;
+// OBSOLETE serial_set_tty_state (monitor_desc, (serial_ttystate) tty_s);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE rombug_is_open = 1;
+// OBSOLETE
+// OBSOLETE log_file = fopen (LOG_FILE, "w");
+// OBSOLETE if (log_file == NULL)
+// OBSOLETE perror_with_name (LOG_FILE);
+// OBSOLETE
+// OBSOLETE push_monitor (&rombug_cmds);
+// OBSOLETE printf_monitor ("\r"); /* CR wakes up monitor */
+// OBSOLETE expect_prompt (1);
+// OBSOLETE push_target (&rombug_ops);
+// OBSOLETE attach_flag = 1;
+// OBSOLETE
+// OBSOLETE if (from_tty)
+// OBSOLETE printf ("Remote %s connected to %s\n", target_shortname,
+// OBSOLETE dev_name);
+// OBSOLETE
+// OBSOLETE rombug_fetch_registers ();
+// OBSOLETE
+// OBSOLETE printf_monitor ("ov e \r");
+// OBSOLETE expect_prompt (1);
+// OBSOLETE bufaddr = 0;
+// OBSOLETE buflen = 0;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /*
+// OBSOLETE * Close out all files and local state before this target loses control.
+// OBSOLETE */
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE rombug_close (int quitting)
+// OBSOLETE {
+// OBSOLETE if (rombug_is_open)
+// OBSOLETE {
+// OBSOLETE serial_close (monitor_desc);
+// OBSOLETE monitor_desc = NULL;
+// OBSOLETE rombug_is_open = 0;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE if (log_file)
+// OBSOLETE {
+// OBSOLETE if (ferror (log_file))
+// OBSOLETE fprintf_unfiltered (gdb_stderr, "Error writing log file.\n");
+// OBSOLETE if (fclose (log_file) != 0)
+// OBSOLETE fprintf_unfiltered (gdb_stderr, "Error closing log file.\n");
+// OBSOLETE log_file = 0;
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE int
+// OBSOLETE rombug_link (char *mod_name, CORE_ADDR *text_reloc)
+// OBSOLETE {
+// OBSOLETE int i, j;
+// OBSOLETE unsigned long val;
+// OBSOLETE unsigned char b;
+// OBSOLETE
+// OBSOLETE printf_monitor ("l %s \r", mod_name);
+// OBSOLETE expect_prompt (1);
+// OBSOLETE printf_monitor (".r \r");
+// OBSOLETE expect (REG_DELIM, 1);
+// OBSOLETE for (i = 0; i <= 7; i++)
+// OBSOLETE {
+// OBSOLETE val = 0;
+// OBSOLETE for (j = 0; j < 4; j++)
+// OBSOLETE {
+// OBSOLETE get_hex_byte (&b);
+// OBSOLETE val = (val << 8) + b;
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE expect_prompt (1);
+// OBSOLETE *text_reloc = val;
+// OBSOLETE return 1;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Terminate the open connection to the remote debugger.
+// OBSOLETE Use this when you want to detach and do something else
+// OBSOLETE with your gdb. */
+// OBSOLETE static void
+// OBSOLETE rombug_detach (int from_tty)
+// OBSOLETE {
+// OBSOLETE if (attach_flag)
+// OBSOLETE {
+// OBSOLETE printf_monitor (GO_CMD);
+// OBSOLETE attach_flag = 0;
+// OBSOLETE }
+// OBSOLETE pop_target (); /* calls rombug_close to do the real work */
+// OBSOLETE if (from_tty)
+// OBSOLETE printf ("Ending remote %s debugging\n", target_shortname);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /*
+// OBSOLETE * Tell the remote machine to resume.
+// OBSOLETE */
+// OBSOLETE static void
+// OBSOLETE rombug_resume (ptid_t ptid, int step, enum target_signal sig)
+// OBSOLETE {
+// OBSOLETE if (monitor_log)
+// OBSOLETE fprintf (log_file, "\nIn Resume (step=%d, sig=%d)\n", step, sig);
+// OBSOLETE
+// OBSOLETE if (step)
+// OBSOLETE {
+// OBSOLETE is_trace_mode = 1;
+// OBSOLETE printf_monitor (STEP_CMD);
+// OBSOLETE /* wait for the echo. **
+// OBSOLETE expect (STEP_CMD, 1);
+// OBSOLETE */
+// OBSOLETE }
+// OBSOLETE else
+// OBSOLETE {
+// OBSOLETE printf_monitor (GO_CMD);
+// OBSOLETE /* swallow the echo. **
+// OBSOLETE expect (GO_CMD, 1);
+// OBSOLETE */
+// OBSOLETE }
+// OBSOLETE bufaddr = 0;
+// OBSOLETE buflen = 0;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /*
+// OBSOLETE * Wait until the remote machine stops, then return,
+// OBSOLETE * storing status in status just as `wait' would.
+// OBSOLETE */
+// OBSOLETE
+// OBSOLETE static ptid *
+// OBSOLETE rombug_wait (ptid_t ptid, struct target_waitstatus *status)
+// OBSOLETE {
+// OBSOLETE int old_timeout = timeout;
+// OBSOLETE struct section_offsets *offs;
+// OBSOLETE CORE_ADDR addr, pc;
+// OBSOLETE struct obj_section *obj_sec;
+// OBSOLETE
+// OBSOLETE if (monitor_log)
+// OBSOLETE fputs ("\nIn wait ()", log_file);
+// OBSOLETE
+// OBSOLETE status->kind = TARGET_WAITKIND_EXITED;
+// OBSOLETE status->value.integer = 0;
+// OBSOLETE
+// OBSOLETE timeout = -1; /* Don't time out -- user program is running. */
+// OBSOLETE expect ("eax:", 0); /* output any message before register display */
+// OBSOLETE expect_prompt (1); /* Wait for prompt, outputting extraneous text */
+// OBSOLETE
+// OBSOLETE status->kind = TARGET_WAITKIND_STOPPED;
+// OBSOLETE status->value.sig = TARGET_SIGNAL_TRAP;
+// OBSOLETE timeout = old_timeout;
+// OBSOLETE rombug_fetch_registers ();
+// OBSOLETE bufaddr = 0;
+// OBSOLETE buflen = 0;
+// OBSOLETE pc = read_register (PC_REGNUM);
+// OBSOLETE addr = read_register (DATABASE_REG);
+// OBSOLETE obj_sec = find_pc_section (pc);
+// OBSOLETE if (obj_sec != NULL)
+// OBSOLETE {
+// OBSOLETE if (obj_sec->objfile != symfile_objfile)
+// OBSOLETE new_symfile_objfile (obj_sec->objfile, 1, 0);
+// OBSOLETE offs = (struct section_offsets *) alloca (SIZEOF_SECTION_OFFSETS);
+// OBSOLETE memcpy (offs, symfile_objfile->section_offsets, SIZEOF_SECTION_OFFSETS);
+// OBSOLETE offs->offsets[SECT_OFF_DATA (symfile_objfile)] = addr;
+// OBSOLETE offs->offsets[SECT_OFF_BSS (symfile_objfile)] = addr;
+// OBSOLETE
+// OBSOLETE objfile_relocate (symfile_objfile, offs);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE return inferior_ptid;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Return the name of register number regno in the form input and output by
+// OBSOLETE monitor. Currently, register_names just happens to contain exactly what
+// OBSOLETE monitor wants. Lets take advantage of that just as long as possible! */
+// OBSOLETE
+// OBSOLETE static char *
+// OBSOLETE get_reg_name (int regno)
+// OBSOLETE {
+// OBSOLETE static char buf[50];
+// OBSOLETE char *p;
+// OBSOLETE char *b;
+// OBSOLETE
+// OBSOLETE b = buf;
+// OBSOLETE
+// OBSOLETE if (regno < 0)
+// OBSOLETE return ("");
+// OBSOLETE /*
+// OBSOLETE for (p = REGISTER_NAME (regno); *p; p++)
+// OBSOLETE *b++ = toupper(*p);
+// OBSOLETE *b = '\000';
+// OBSOLETE */
+// OBSOLETE p = (char *) REGISTER_NAME (regno);
+// OBSOLETE return p;
+// OBSOLETE /*
+// OBSOLETE return buf;
+// OBSOLETE */
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* read the remote registers into the block regs. */
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE rombug_fetch_registers (void)
+// OBSOLETE {
+// OBSOLETE int regno, j, i;
+// OBSOLETE long val;
+// OBSOLETE unsigned char b;
+// OBSOLETE
+// OBSOLETE printf_monitor (GET_REG);
+// OBSOLETE expect ("eax:", 1);
+// OBSOLETE expect ("\n", 1);
+// OBSOLETE get_hex_regs (1, 0);
+// OBSOLETE get_hex_regs (1, 3);
+// OBSOLETE get_hex_regs (1, 1);
+// OBSOLETE get_hex_regs (1, 2);
+// OBSOLETE get_hex_regs (1, 6);
+// OBSOLETE get_hex_regs (1, 7);
+// OBSOLETE get_hex_regs (1, 5);
+// OBSOLETE get_hex_regs (1, 4);
+// OBSOLETE for (regno = 8; regno <= 15; regno++)
+// OBSOLETE {
+// OBSOLETE expect (REG_DELIM, 1);
+// OBSOLETE if (regno >= 8 && regno <= 13)
+// OBSOLETE {
+// OBSOLETE val = 0;
+// OBSOLETE for (j = 0; j < 2; j++)
+// OBSOLETE {
+// OBSOLETE get_hex_byte (&b);
+// OBSOLETE if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+// OBSOLETE val = (val << 8) + b;
+// OBSOLETE else
+// OBSOLETE val = val + (b << (j * 8));
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE if (regno == 8)
+// OBSOLETE i = 10;
+// OBSOLETE if (regno >= 9 && regno <= 12)
+// OBSOLETE i = regno + 3;
+// OBSOLETE if (regno == 13)
+// OBSOLETE i = 11;
+// OBSOLETE supply_register (i, (char *) &val);
+// OBSOLETE }
+// OBSOLETE else if (regno == 14)
+// OBSOLETE {
+// OBSOLETE get_hex_regs (1, PC_REGNUM);
+// OBSOLETE }
+// OBSOLETE else if (regno == 15)
+// OBSOLETE {
+// OBSOLETE get_hex_regs (1, 9);
+// OBSOLETE }
+// OBSOLETE else
+// OBSOLETE {
+// OBSOLETE val = 0;
+// OBSOLETE supply_register (regno, (char *) &val);
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE is_trace_mode = 0;
+// OBSOLETE expect_prompt (1);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Fetch register REGNO, or all registers if REGNO is -1.
+// OBSOLETE Returns errno value. */
+// OBSOLETE static void
+// OBSOLETE rombug_fetch_register (int regno)
+// OBSOLETE {
+// OBSOLETE int val, j;
+// OBSOLETE unsigned char b;
+// OBSOLETE
+// OBSOLETE if (monitor_log)
+// OBSOLETE {
+// OBSOLETE fprintf (log_file, "\nIn Fetch Register (reg=%s)\n", get_reg_name (regno));
+// OBSOLETE fflush (log_file);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE if (regno < 0)
+// OBSOLETE {
+// OBSOLETE rombug_fetch_registers ();
+// OBSOLETE }
+// OBSOLETE else
+// OBSOLETE {
+// OBSOLETE char *name = get_reg_name (regno);
+// OBSOLETE printf_monitor (GET_REG);
+// OBSOLETE if (regno >= 10 && regno <= 15)
+// OBSOLETE {
+// OBSOLETE expect ("\n", 1);
+// OBSOLETE expect ("\n", 1);
+// OBSOLETE expect (name, 1);
+// OBSOLETE expect (REG_DELIM, 1);
+// OBSOLETE val = 0;
+// OBSOLETE for (j = 0; j < 2; j++)
+// OBSOLETE {
+// OBSOLETE get_hex_byte (&b);
+// OBSOLETE if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+// OBSOLETE val = (val << 8) + b;
+// OBSOLETE else
+// OBSOLETE val = val + (b << (j * 8));
+// OBSOLETE }
+// OBSOLETE supply_register (regno, (char *) &val);
+// OBSOLETE }
+// OBSOLETE else if (regno == 8 || regno == 9)
+// OBSOLETE {
+// OBSOLETE expect ("\n", 1);
+// OBSOLETE expect ("\n", 1);
+// OBSOLETE expect ("\n", 1);
+// OBSOLETE expect (name, 1);
+// OBSOLETE expect (REG_DELIM, 1);
+// OBSOLETE get_hex_regs (1, regno);
+// OBSOLETE }
+// OBSOLETE else
+// OBSOLETE {
+// OBSOLETE expect (name, 1);
+// OBSOLETE expect (REG_DELIM, 1);
+// OBSOLETE expect ("\n", 1);
+// OBSOLETE get_hex_regs (1, 0);
+// OBSOLETE get_hex_regs (1, 3);
+// OBSOLETE get_hex_regs (1, 1);
+// OBSOLETE get_hex_regs (1, 2);
+// OBSOLETE get_hex_regs (1, 6);
+// OBSOLETE get_hex_regs (1, 7);
+// OBSOLETE get_hex_regs (1, 5);
+// OBSOLETE get_hex_regs (1, 4);
+// OBSOLETE }
+// OBSOLETE expect_prompt (1);
+// OBSOLETE }
+// OBSOLETE return;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Store the remote registers from the contents of the block REGS. */
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE rombug_store_registers (void)
+// OBSOLETE {
+// OBSOLETE int regno;
+// OBSOLETE
+// OBSOLETE for (regno = 0; regno <= PC_REGNUM; regno++)
+// OBSOLETE rombug_store_register (regno);
+// OBSOLETE
+// OBSOLETE registers_changed ();
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Store register REGNO, or all if REGNO == 0.
+// OBSOLETE return errno value. */
+// OBSOLETE static void
+// OBSOLETE rombug_store_register (int regno)
+// OBSOLETE {
+// OBSOLETE char *name;
+// OBSOLETE
+// OBSOLETE if (monitor_log)
+// OBSOLETE fprintf (log_file, "\nIn Store_register (regno=%d)\n", regno);
+// OBSOLETE
+// OBSOLETE if (regno == -1)
+// OBSOLETE rombug_store_registers ();
+// OBSOLETE else
+// OBSOLETE {
+// OBSOLETE if (sr_get_debug ())
+// OBSOLETE printf ("Setting register %s to 0x%x\n", get_reg_name (regno), read_register (regno));
+// OBSOLETE
+// OBSOLETE name = get_reg_name (regno);
+// OBSOLETE if (name == 0)
+// OBSOLETE return;
+// OBSOLETE printf_monitor (SET_REG, name, read_register (regno));
+// OBSOLETE
+// OBSOLETE is_trace_mode = 0;
+// OBSOLETE expect_prompt (1);
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Get ready to modify the registers array. On machines which store
+// OBSOLETE individual registers, this doesn't need to do anything. On machines
+// OBSOLETE which store all the registers in one fell swoop, this makes sure
+// OBSOLETE that registers contains all the registers from the program being
+// OBSOLETE debugged. */
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE rombug_prepare_to_store (void)
+// OBSOLETE {
+// OBSOLETE /* Do nothing, since we can store individual regs */
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE rombug_files_info (void)
+// OBSOLETE {
+// OBSOLETE printf ("\tAttached to %s at %d baud.\n",
+// OBSOLETE dev_name, sr_get_baud_rate ());
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Copy LEN bytes of data from debugger memory at MYADDR
+// OBSOLETE to inferior's memory at MEMADDR. Returns length moved. */
+// OBSOLETE static int
+// OBSOLETE rombug_write_inferior_memory (CORE_ADDR memaddr, unsigned char *myaddr, int len)
+// OBSOLETE {
+// OBSOLETE int i;
+// OBSOLETE char buf[10];
+// OBSOLETE
+// OBSOLETE if (monitor_log)
+// OBSOLETE fprintf (log_file, "\nIn Write_inferior_memory (memaddr=%x, len=%d)\n", memaddr, len);
+// OBSOLETE
+// OBSOLETE printf_monitor (MEM_SET_CMD, memaddr);
+// OBSOLETE for (i = 0; i < len; i++)
+// OBSOLETE {
+// OBSOLETE expect (CMD_DELIM, 1);
+// OBSOLETE printf_monitor ("%x \r", myaddr[i]);
+// OBSOLETE if (sr_get_debug ())
+// OBSOLETE printf ("\nSet 0x%x to 0x%x\n", memaddr + i, myaddr[i]);
+// OBSOLETE }
+// OBSOLETE expect (CMD_DELIM, 1);
+// OBSOLETE if (CMD_END)
+// OBSOLETE printf_monitor (CMD_END);
+// OBSOLETE is_trace_mode = 0;
+// OBSOLETE expect_prompt (1);
+// OBSOLETE
+// OBSOLETE bufaddr = 0;
+// OBSOLETE buflen = 0;
+// OBSOLETE return len;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Read LEN bytes from inferior memory at MEMADDR. Put the result
+// OBSOLETE at debugger address MYADDR. Returns length moved. */
+// OBSOLETE static int
+// OBSOLETE rombug_read_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len)
+// OBSOLETE {
+// OBSOLETE int i, j;
+// OBSOLETE
+// OBSOLETE /* Number of bytes read so far. */
+// OBSOLETE int count;
+// OBSOLETE
+// OBSOLETE /* Starting address of this pass. */
+// OBSOLETE unsigned long startaddr;
+// OBSOLETE
+// OBSOLETE /* Number of bytes to read in this pass. */
+// OBSOLETE int len_this_pass;
+// OBSOLETE
+// OBSOLETE if (monitor_log)
+// OBSOLETE fprintf (log_file, "\nIn Read_inferior_memory (memaddr=%x, len=%d)\n", memaddr, len);
+// OBSOLETE
+// OBSOLETE /* Note that this code works correctly if startaddr is just less
+// OBSOLETE than UINT_MAX (well, really CORE_ADDR_MAX if there was such a
+// OBSOLETE thing). That is, something like
+// OBSOLETE rombug_read_bytes (CORE_ADDR_MAX - 4, foo, 4)
+// OBSOLETE works--it never adds len To memaddr and gets 0. */
+// OBSOLETE /* However, something like
+// OBSOLETE rombug_read_bytes (CORE_ADDR_MAX - 3, foo, 4)
+// OBSOLETE doesn't need to work. Detect it and give up if there's an attempt
+// OBSOLETE to do that. */
+// OBSOLETE if (((memaddr - 1) + len) < memaddr)
+// OBSOLETE {
+// OBSOLETE errno = EIO;
+// OBSOLETE return 0;
+// OBSOLETE }
+// OBSOLETE if (bufaddr <= memaddr && (memaddr + len) <= (bufaddr + buflen))
+// OBSOLETE {
+// OBSOLETE memcpy (myaddr, &readbuf[memaddr - bufaddr], len);
+// OBSOLETE return len;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE startaddr = memaddr;
+// OBSOLETE count = 0;
+// OBSOLETE while (count < len)
+// OBSOLETE {
+// OBSOLETE len_this_pass = 16;
+// OBSOLETE if ((startaddr % 16) != 0)
+// OBSOLETE len_this_pass -= startaddr % 16;
+// OBSOLETE if (len_this_pass > (len - count))
+// OBSOLETE len_this_pass = (len - count);
+// OBSOLETE if (sr_get_debug ())
+// OBSOLETE printf ("\nDisplay %d bytes at %x\n", len_this_pass, startaddr);
+// OBSOLETE
+// OBSOLETE printf_monitor (MEM_DIS_CMD, startaddr, 8);
+// OBSOLETE expect ("- ", 1);
+// OBSOLETE for (i = 0; i < 16; i++)
+// OBSOLETE {
+// OBSOLETE get_hex_byte (&readbuf[i]);
+// OBSOLETE }
+// OBSOLETE bufaddr = startaddr;
+// OBSOLETE buflen = 16;
+// OBSOLETE memcpy (&myaddr[count], readbuf, len_this_pass);
+// OBSOLETE count += len_this_pass;
+// OBSOLETE startaddr += len_this_pass;
+// OBSOLETE expect (CMD_DELIM, 1);
+// OBSOLETE }
+// OBSOLETE if (CMD_END)
+// OBSOLETE printf_monitor (CMD_END);
+// OBSOLETE is_trace_mode = 0;
+// OBSOLETE expect_prompt (1);
+// OBSOLETE
+// OBSOLETE return len;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Transfer LEN bytes between GDB address MYADDR and target address
+// OBSOLETE MEMADDR. If WRITE is non-zero, transfer them to the target,
+// OBSOLETE otherwise transfer them from the target. TARGET is unused.
+// OBSOLETE
+// OBSOLETE Returns the number of bytes transferred. */
+// OBSOLETE
+// OBSOLETE static int
+// OBSOLETE rombug_xfer_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len,
+// OBSOLETE int write, struct mem_attrib *attrib,
+// OBSOLETE struct target_ops *target)
+// OBSOLETE {
+// OBSOLETE if (write)
+// OBSOLETE return rombug_write_inferior_memory (memaddr, myaddr, len);
+// OBSOLETE else
+// OBSOLETE return rombug_read_inferior_memory (memaddr, myaddr, len);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE rombug_kill (char *args, int from_tty)
+// OBSOLETE {
+// OBSOLETE return; /* ignore attempts to kill target system */
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Clean up when a program exits.
+// OBSOLETE The program actually lives on in the remote processor's RAM, and may be
+// OBSOLETE run again without a download. Don't leave it full of breakpoint
+// OBSOLETE instructions. */
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE rombug_mourn_inferior (void)
+// OBSOLETE {
+// OBSOLETE remove_breakpoints ();
+// OBSOLETE generic_mourn_inferior (); /* Do all the proper things now */
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE #define MAX_MONITOR_BREAKPOINTS 16
+// OBSOLETE
+// OBSOLETE static CORE_ADDR breakaddr[MAX_MONITOR_BREAKPOINTS] =
+// OBSOLETE {0};
+// OBSOLETE
+// OBSOLETE static int
+// OBSOLETE rombug_insert_breakpoint (CORE_ADDR addr, char *shadow)
+// OBSOLETE {
+// OBSOLETE int i;
+// OBSOLETE CORE_ADDR bp_addr = addr;
+// OBSOLETE int bp_size = 0;
+// OBSOLETE
+// OBSOLETE if (monitor_log)
+// OBSOLETE fprintf (log_file, "\nIn Insert_breakpoint (addr=%x)\n", addr);
+// OBSOLETE BREAKPOINT_FROM_PC (&bp_addr, &bp_size);
+// OBSOLETE
+// OBSOLETE for (i = 0; i <= MAX_MONITOR_BREAKPOINTS; i++)
+// OBSOLETE if (breakaddr[i] == 0)
+// OBSOLETE {
+// OBSOLETE breakaddr[i] = addr;
+// OBSOLETE if (sr_get_debug ())
+// OBSOLETE printf ("Breakpoint at %x\n", addr);
+// OBSOLETE rombug_read_inferior_memory (bp_addr, shadow, bp_size);
+// OBSOLETE printf_monitor (SET_BREAK_CMD, addr);
+// OBSOLETE is_trace_mode = 0;
+// OBSOLETE expect_prompt (1);
+// OBSOLETE return 0;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE fprintf_unfiltered (gdb_stderr, "Too many breakpoints (> 16) for monitor\n");
+// OBSOLETE return 1;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /*
+// OBSOLETE * _remove_breakpoint -- Tell the monitor to remove a breakpoint
+// OBSOLETE */
+// OBSOLETE static int
+// OBSOLETE rombug_remove_breakpoint (CORE_ADDR addr, char *shadow)
+// OBSOLETE {
+// OBSOLETE int i;
+// OBSOLETE
+// OBSOLETE if (monitor_log)
+// OBSOLETE fprintf (log_file, "\nIn Remove_breakpoint (addr=%x)\n", addr);
+// OBSOLETE
+// OBSOLETE for (i = 0; i < MAX_MONITOR_BREAKPOINTS; i++)
+// OBSOLETE if (breakaddr[i] == addr)
+// OBSOLETE {
+// OBSOLETE breakaddr[i] = 0;
+// OBSOLETE printf_monitor (CLR_BREAK_CMD, addr);
+// OBSOLETE is_trace_mode = 0;
+// OBSOLETE expect_prompt (1);
+// OBSOLETE return 0;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE fprintf_unfiltered (gdb_stderr,
+// OBSOLETE "Can't find breakpoint associated with 0x%x\n", addr);
+// OBSOLETE return 1;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Load a file. This is usually an srecord, which is ascii. No
+// OBSOLETE protocol, just sent line by line. */
+// OBSOLETE
+// OBSOLETE #define DOWNLOAD_LINE_SIZE 100
+// OBSOLETE static void
+// OBSOLETE rombug_load (char *arg)
+// OBSOLETE {
+// OBSOLETE /* this part comment out for os9* */
+// OBSOLETE #if 0
+// OBSOLETE FILE *download;
+// OBSOLETE char buf[DOWNLOAD_LINE_SIZE];
+// OBSOLETE int i, bytes_read;
+// OBSOLETE
+// OBSOLETE if (sr_get_debug ())
+// OBSOLETE printf ("Loading %s to monitor\n", arg);
+// OBSOLETE
+// OBSOLETE download = fopen (arg, "r");
+// OBSOLETE if (download == NULL)
+// OBSOLETE {
+// OBSOLETE error (sprintf (buf, "%s Does not exist", arg));
+// OBSOLETE return;
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE printf_monitor (LOAD_CMD);
+// OBSOLETE /* expect ("Waiting for S-records from host... ", 1); */
+// OBSOLETE
+// OBSOLETE while (!feof (download))
+// OBSOLETE {
+// OBSOLETE bytes_read = fread (buf, sizeof (char), DOWNLOAD_LINE_SIZE, download);
+// OBSOLETE if (hashmark)
+// OBSOLETE {
+// OBSOLETE putchar ('.');
+// OBSOLETE fflush (stdout);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE if (serial_write (monitor_desc, buf, bytes_read))
+// OBSOLETE {
+// OBSOLETE fprintf_unfiltered (gdb_stderr,
+// OBSOLETE "serial_write failed: (while downloading) %s\n",
+// OBSOLETE safe_strerror (errno));
+// OBSOLETE break;
+// OBSOLETE }
+// OBSOLETE i = 0;
+// OBSOLETE while (i++ <= 200000)
+// OBSOLETE {
+// OBSOLETE }; /* Ugly HACK, probably needs flow control */
+// OBSOLETE if (bytes_read < DOWNLOAD_LINE_SIZE)
+// OBSOLETE {
+// OBSOLETE if (!feof (download))
+// OBSOLETE error ("Only read %d bytes\n", bytes_read);
+// OBSOLETE break;
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE if (hashmark)
+// OBSOLETE {
+// OBSOLETE putchar ('\n');
+// OBSOLETE }
+// OBSOLETE if (!feof (download))
+// OBSOLETE error ("Never got EOF while downloading");
+// OBSOLETE fclose (download);
+// OBSOLETE #endif /* 0 */
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE /* Put a command string, in args, out to MONITOR.
+// OBSOLETE Output from MONITOR is placed on the users terminal until the prompt
+// OBSOLETE is seen. */
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE rombug_command (char *args, int fromtty)
+// OBSOLETE {
+// OBSOLETE if (monitor_desc == NULL)
+// OBSOLETE error ("monitor target not open.");
+// OBSOLETE
+// OBSOLETE if (monitor_log)
+// OBSOLETE fprintf (log_file, "\nIn command (args=%s)\n", args);
+// OBSOLETE
+// OBSOLETE if (!args)
+// OBSOLETE error ("Missing command.");
+// OBSOLETE
+// OBSOLETE printf_monitor ("%s\r", args);
+// OBSOLETE expect_prompt (0);
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE #if 0
+// OBSOLETE /* Connect the user directly to MONITOR. This command acts just like the
+// OBSOLETE 'cu' or 'tip' command. Use <CR>~. or <CR>~^D to break out. */
+// OBSOLETE
+// OBSOLETE static struct ttystate ttystate;
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE cleanup_tty (void)
+// OBSOLETE {
+// OBSOLETE printf ("\r\n[Exiting connect mode]\r\n");
+// OBSOLETE /*serial_restore(0, &ttystate); */
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE connect_command (char *args, int fromtty)
+// OBSOLETE {
+// OBSOLETE fd_set readfds;
+// OBSOLETE int numfds;
+// OBSOLETE int c;
+// OBSOLETE char cur_esc = 0;
+// OBSOLETE
+// OBSOLETE dont_repeat ();
+// OBSOLETE
+// OBSOLETE if (monitor_desc == NULL)
+// OBSOLETE error ("monitor target not open.");
+// OBSOLETE
+// OBSOLETE if (args)
+// OBSOLETE fprintf ("This command takes no args. They have been ignored.\n");
+// OBSOLETE
+// OBSOLETE printf ("[Entering connect mode. Use ~. or ~^D to escape]\n");
+// OBSOLETE
+// OBSOLETE serial_raw (0, &ttystate);
+// OBSOLETE
+// OBSOLETE make_cleanup (cleanup_tty, 0);
+// OBSOLETE
+// OBSOLETE FD_ZERO (&readfds);
+// OBSOLETE
+// OBSOLETE while (1)
+// OBSOLETE {
+// OBSOLETE do
+// OBSOLETE {
+// OBSOLETE FD_SET (0, &readfds);
+// OBSOLETE FD_SET (deprecated_serial_fd (monitor_desc), &readfds);
+// OBSOLETE numfds = select (sizeof (readfds) * 8, &readfds, 0, 0, 0);
+// OBSOLETE }
+// OBSOLETE while (numfds == 0);
+// OBSOLETE
+// OBSOLETE if (numfds < 0)
+// OBSOLETE perror_with_name ("select");
+// OBSOLETE
+// OBSOLETE if (FD_ISSET (0, &readfds))
+// OBSOLETE { /* tty input, send to monitor */
+// OBSOLETE c = getchar ();
+// OBSOLETE if (c < 0)
+// OBSOLETE perror_with_name ("connect");
+// OBSOLETE
+// OBSOLETE printf_monitor ("%c", c);
+// OBSOLETE switch (cur_esc)
+// OBSOLETE {
+// OBSOLETE case 0:
+// OBSOLETE if (c == '\r')
+// OBSOLETE cur_esc = c;
+// OBSOLETE break;
+// OBSOLETE case '\r':
+// OBSOLETE if (c == '~')
+// OBSOLETE cur_esc = c;
+// OBSOLETE else
+// OBSOLETE cur_esc = 0;
+// OBSOLETE break;
+// OBSOLETE case '~':
+// OBSOLETE if (c == '.' || c == '\004')
+// OBSOLETE return;
+// OBSOLETE else
+// OBSOLETE cur_esc = 0;
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE if (FD_ISSET (deprecated_serial_fd (monitor_desc), &readfds))
+// OBSOLETE {
+// OBSOLETE while (1)
+// OBSOLETE {
+// OBSOLETE c = readchar (0);
+// OBSOLETE if (c < 0)
+// OBSOLETE break;
+// OBSOLETE putchar (c);
+// OBSOLETE }
+// OBSOLETE fflush (stdout);
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE }
+// OBSOLETE #endif
+// OBSOLETE
+// OBSOLETE /*
+// OBSOLETE * Define the monitor command strings. Since these are passed directly
+// OBSOLETE * through to a printf style function, we need can include formatting
+// OBSOLETE * strings. We also need a CR or LF on the end.
+// OBSOLETE */
+// OBSOLETE #warning FIXME: monitor interface pattern strings, stale struct decl
+// OBSOLETE struct monitor_ops rombug_cmds =
+// OBSOLETE {
+// OBSOLETE "g \r", /* execute or usually GO command */
+// OBSOLETE "g \r", /* continue command */
+// OBSOLETE "t \r", /* single step */
+// OBSOLETE "b %x\r", /* set a breakpoint */
+// OBSOLETE "k %x\r", /* clear a breakpoint */
+// OBSOLETE "c %x\r", /* set memory to a value */
+// OBSOLETE "d %x %d\r", /* display memory */
+// OBSOLETE "$%08X", /* prompt memory commands use */
+// OBSOLETE ".%s %x\r", /* set a register */
+// OBSOLETE ":", /* delimiter between registers */
+// OBSOLETE ". \r", /* read a register */
+// OBSOLETE "mf \r", /* download command */
+// OBSOLETE "RomBug: ", /* monitor command prompt */
+// OBSOLETE ": ", /* end-of-command delimitor */
+// OBSOLETE ".\r" /* optional command terminator */
+// OBSOLETE };
+// OBSOLETE
+// OBSOLETE struct target_ops rombug_ops;
+// OBSOLETE
+// OBSOLETE static void
+// OBSOLETE init_rombug_ops (void)
+// OBSOLETE {
+// OBSOLETE rombug_ops.to_shortname = "rombug";
+// OBSOLETE rombug_ops.to_longname = "Microware's ROMBUG debug monitor";
+// OBSOLETE rombug_ops.to_doc = "Use a remote computer running the ROMBUG debug monitor.\n\
+// OBSOLETE Specify the serial device it is connected to (e.g. /dev/ttya).",
+// OBSOLETE rombug_ops.to_open = rombug_open;
+// OBSOLETE rombug_ops.to_close = rombug_close;
+// OBSOLETE rombug_ops.to_attach = 0;
+// OBSOLETE rombug_ops.to_post_attach = NULL;
+// OBSOLETE rombug_ops.to_require_attach = NULL;
+// OBSOLETE rombug_ops.to_detach = rombug_detach;
+// OBSOLETE rombug_ops.to_require_detach = NULL;
+// OBSOLETE rombug_ops.to_resume = rombug_resume;
+// OBSOLETE rombug_ops.to_wait = rombug_wait;
+// OBSOLETE rombug_ops.to_post_wait = NULL;
+// OBSOLETE rombug_ops.to_fetch_registers = rombug_fetch_register;
+// OBSOLETE rombug_ops.to_store_registers = rombug_store_register;
+// OBSOLETE rombug_ops.to_prepare_to_store = rombug_prepare_to_store;
+// OBSOLETE rombug_ops.to_xfer_memory = rombug_xfer_inferior_memory;
+// OBSOLETE rombug_ops.to_files_info = rombug_files_info;
+// OBSOLETE rombug_ops.to_insert_breakpoint = rombug_insert_breakpoint;
+// OBSOLETE rombug_ops.to_remove_breakpoint = rombug_remove_breakpoint; /* Breakpoints */
+// OBSOLETE rombug_ops.to_terminal_init = 0;
+// OBSOLETE rombug_ops.to_terminal_inferior = 0;
+// OBSOLETE rombug_ops.to_terminal_ours_for_output = 0;
+// OBSOLETE rombug_ops.to_terminal_ours = 0;
+// OBSOLETE rombug_ops.to_terminal_info = 0; /* Terminal handling */
+// OBSOLETE rombug_ops.to_kill = rombug_kill;
+// OBSOLETE rombug_ops.to_load = rombug_load; /* load */
+// OBSOLETE rombug_ops.to_lookup_symbol = rombug_link; /* lookup_symbol */
+// OBSOLETE rombug_ops.to_create_inferior = rombug_create_inferior;
+// OBSOLETE rombug_ops.to_post_startup_inferior = NULL;
+// OBSOLETE rombug_ops.to_acknowledge_created_inferior = NULL;
+// OBSOLETE rombug_ops.to_clone_and_follow_inferior = NULL;
+// OBSOLETE rombug_ops.to_post_follow_inferior_by_clone = NULL;
+// OBSOLETE rombug_ops.to_insert_fork_catchpoint = NULL;
+// OBSOLETE rombug_ops.to_remove_fork_catchpoint = NULL;
+// OBSOLETE rombug_ops.to_insert_vfork_catchpoint = NULL;
+// OBSOLETE rombug_ops.to_remove_vfork_catchpoint = NULL;
+// OBSOLETE rombug_ops.to_has_forked = NULL;
+// OBSOLETE rombug_ops.to_has_vforked = NULL;
+// OBSOLETE rombug_ops.to_can_follow_vfork_prior_to_exec = NULL;
+// OBSOLETE rombug_ops.to_post_follow_vfork = NULL;
+// OBSOLETE rombug_ops.to_insert_exec_catchpoint = NULL;
+// OBSOLETE rombug_ops.to_remove_exec_catchpoint = NULL;
+// OBSOLETE rombug_ops.to_has_execd = NULL;
+// OBSOLETE rombug_ops.to_reported_exec_events_per_exec_call = NULL;
+// OBSOLETE rombug_ops.to_has_exited = NULL;
+// OBSOLETE rombug_ops.to_mourn_inferior = rombug_mourn_inferior;
+// OBSOLETE rombug_ops.to_can_run = 0; /* can_run */
+// OBSOLETE rombug_ops.to_notice_signals = 0; /* notice_signals */
+// OBSOLETE rombug_ops.to_thread_alive = 0;
+// OBSOLETE rombug_ops.to_stop = 0; /* to_stop */
+// OBSOLETE rombug_ops.to_pid_to_exec_file = NULL;
+// OBSOLETE rombug_ops.to_stratum = process_stratum;
+// OBSOLETE rombug_ops.DONT_USE = 0; /* next */
+// OBSOLETE rombug_ops.to_has_all_memory = 1;
+// OBSOLETE rombug_ops.to_has_memory = 1;
+// OBSOLETE rombug_ops.to_has_stack = 1;
+// OBSOLETE rombug_ops.to_has_registers = 1;
+// OBSOLETE rombug_ops.to_has_execution = 1; /* has execution */
+// OBSOLETE rombug_ops.to_sections = 0;
+// OBSOLETE rombug_ops.to_sections_end = 0; /* Section pointers */
+// OBSOLETE rombug_ops.to_magic = OPS_MAGIC; /* Always the last thing */
+// OBSOLETE }
+// OBSOLETE
+// OBSOLETE void
+// OBSOLETE _initialize_remote_os9k (void)
+// OBSOLETE {
+// OBSOLETE init_rombug_ops ();
+// OBSOLETE add_target (&rombug_ops);
+// OBSOLETE
+// OBSOLETE add_show_from_set (
+// OBSOLETE add_set_cmd ("hash", no_class, var_boolean, (char *) &hashmark,
+// OBSOLETE "Set display of activity while downloading a file.\nWhen enabled, a period \'.\' is displayed.",
+// OBSOLETE &setlist),
+// OBSOLETE &showlist);
+// OBSOLETE
+// OBSOLETE add_show_from_set (
+// OBSOLETE add_set_cmd ("timeout", no_class, var_zinteger,
+// OBSOLETE (char *) &timeout,
+// OBSOLETE "Set timeout in seconds for remote MIPS serial I/O.",
+// OBSOLETE &setlist),
+// OBSOLETE &showlist);
+// OBSOLETE
+// OBSOLETE add_show_from_set (
+// OBSOLETE add_set_cmd ("remotelog", no_class, var_zinteger,
+// OBSOLETE (char *) &monitor_log,
+// OBSOLETE "Set monitor activity log on(=1) or off(=0).",
+// OBSOLETE &setlist),
+// OBSOLETE &showlist);
+// OBSOLETE
+// OBSOLETE add_show_from_set (
+// OBSOLETE add_set_cmd ("remotexon", no_class, var_zinteger,
+// OBSOLETE (char *) &tty_xon,
+// OBSOLETE "Set remote tty line XON control",
+// OBSOLETE &setlist),
+// OBSOLETE &showlist);
+// OBSOLETE
+// OBSOLETE add_show_from_set (
+// OBSOLETE add_set_cmd ("remotexoff", no_class, var_zinteger,
+// OBSOLETE (char *) &tty_xoff,
+// OBSOLETE "Set remote tty line XOFF control",
+// OBSOLETE &setlist),
+// OBSOLETE &showlist);
+// OBSOLETE
+// OBSOLETE add_com ("rombug <command>", class_obscure, rombug_command,
+// OBSOLETE "Send a command to the debug monitor.");
+// OBSOLETE #if 0
+// OBSOLETE add_com ("connect", class_obscure, connect_command,
+// OBSOLETE "Connect the terminal directly up to a serial based command monitor.\nUse <CR>~. or <CR>~^D to break out.");
+// OBSOLETE #endif
+// OBSOLETE }