static void sds_resume PARAMS ((int, int, enum target_signal));
-static int sds_start_remote PARAMS ((char *));
+static int sds_start_remote PARAMS ((PTR));
static void sds_open PARAMS ((char *, int));
static void sds_create_inferior PARAMS ((char *, char *, char **));
-extern void sds_load PARAMS ((char *, int));
+static void sds_load PARAMS ((char *, int));
static int getmessage PARAMS ((unsigned char *, int));
static int
sds_start_remote (dummy)
- char *dummy;
+ PTR dummy;
{
char c;
unsigned char buf[200];
SERIAL_WRITE (sds_desc, "{#}\r\n", 5);
while ((c = readchar (1)) >= 0)
- printf_unfiltered ("%c");
+ printf_unfiltered ("%c", c);
printf_unfiltered ("\n");
next_msg_id = 251;
/* Start the remote connection; if error (0), discard this target.
In particular, if the user quits, be sure to discard it (we'd be
in an inconsistent state otherwise). */
- if (!catch_errors (sds_start_remote, (char *)0,
+ if (!catch_errors (sds_start_remote, NULL,
"Couldn't establish connection to remote target\n",
RETURN_MASK_ALL))
pop_target ();
if (c3 == '+')
{
message_pending = 1;
- return;
+ return 0; /*????*/
}
continue;
}
/* We have tried hard enough, and just can't receive the packet. Give up. */
printf_unfiltered ("Ignoring packet error, continuing...\n");
+ return 0;
}
\f
static void
\f
/* Define the target operations vector. */
-static struct target_ops sds_ops =
+static struct target_ops sds_ops ;
+
+static void
+init_sds_ops(void)
{
- "sds", /* to_shortname */
- "Remote serial target with SDS protocol", /* to_longname */
- "Use a remote computer via a serial line, using the SDS protocol.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).", /* to_doc */
- sds_open, /* to_open */
- sds_close, /* to_close */
- NULL, /* to_attach */
- sds_detach, /* to_detach */
- sds_resume, /* to_resume */
- sds_wait, /* to_wait */
- sds_fetch_registers, /* to_fetch_registers */
- sds_store_registers, /* to_store_registers */
- sds_prepare_to_store, /* to_prepare_to_store */
- sds_xfer_memory, /* to_xfer_memory */
- sds_files_info, /* to_files_info */
- sds_insert_breakpoint, /* to_insert_breakpoint */
- sds_remove_breakpoint, /* to_remove_breakpoint */
- NULL, /* to_terminal_init */
- NULL, /* to_terminal_inferior */
- NULL, /* to_terminal_ours_for_output */
- NULL, /* to_terminal_ours */
- NULL, /* to_terminal_info */
- sds_kill, /* to_kill */
- sds_load, /* to_load */
- NULL, /* to_lookup_symbol */
- sds_create_inferior, /* to_create_inferior */
- sds_mourn, /* to_mourn_inferior */
- 0, /* to_can_run */
- 0, /* to_notice_signals */
- 0, /* to_thread_alive */
- 0, /* to_stop */
- process_stratum, /* to_stratum */
- NULL, /* to_next */
- 1, /* to_has_all_memory */
- 1, /* to_has_memory */
- 1, /* to_has_stack */
- 1, /* to_has_registers */
- 1, /* to_has_execution */
- NULL, /* sections */
- NULL, /* sections_end */
- OPS_MAGIC /* to_magic */
-};
+ sds_ops.to_shortname = "sds";
+ sds_ops.to_longname = "Remote serial target with SDS protocol";
+ sds_ops.to_doc = "Use a remote computer via a serial line; using the SDS protocol.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).",
+ sds_ops.to_open = sds_open;
+ sds_ops.to_close = sds_close;
+ sds_ops.to_attach = NULL;
+ sds_ops.to_post_attach = NULL;
+ sds_ops.to_require_attach = NULL;
+ sds_ops.to_detach = sds_detach;
+ sds_ops.to_require_detach = NULL;
+ sds_ops.to_resume = sds_resume;
+ sds_ops.to_wait = sds_wait;
+ sds_ops.to_post_wait = NULL;
+ sds_ops.to_fetch_registers = sds_fetch_registers;
+ sds_ops.to_store_registers = sds_store_registers;
+ sds_ops.to_prepare_to_store = sds_prepare_to_store;
+ sds_ops.to_xfer_memory = sds_xfer_memory;
+ sds_ops.to_files_info = sds_files_info;
+ sds_ops.to_insert_breakpoint = sds_insert_breakpoint;
+ sds_ops.to_remove_breakpoint = sds_remove_breakpoint;
+ sds_ops.to_terminal_init = NULL;
+ sds_ops.to_terminal_inferior = NULL;
+ sds_ops.to_terminal_ours_for_output = NULL;
+ sds_ops.to_terminal_ours = NULL;
+ sds_ops.to_terminal_info = NULL;
+ sds_ops.to_kill = sds_kill;
+ sds_ops.to_load = sds_load;
+ sds_ops.to_lookup_symbol = NULL;
+ sds_ops.to_create_inferior = sds_create_inferior;
+ sds_ops.to_post_startup_inferior = NULL;
+ sds_ops.to_acknowledge_created_inferior = NULL;
+ sds_ops.to_clone_and_follow_inferior = NULL;
+ sds_ops.to_post_follow_inferior_by_clone = NULL;
+ sds_ops.to_insert_fork_catchpoint = NULL;
+ sds_ops.to_remove_fork_catchpoint = NULL;
+ sds_ops.to_insert_vfork_catchpoint = NULL;
+ sds_ops.to_remove_vfork_catchpoint = NULL;
+ sds_ops.to_has_forked = NULL;
+ sds_ops.to_has_vforked = NULL;
+ sds_ops.to_can_follow_vfork_prior_to_exec = NULL;
+ sds_ops.to_post_follow_vfork = NULL;
+ sds_ops.to_insert_exec_catchpoint = NULL;
+ sds_ops.to_remove_exec_catchpoint = NULL;
+ sds_ops.to_has_execd = NULL;
+ sds_ops.to_reported_exec_events_per_exec_call = NULL;
+ sds_ops.to_has_exited = NULL;
+ sds_ops.to_mourn_inferior = sds_mourn;
+ sds_ops.to_can_run = 0;
+ sds_ops.to_notice_signals = 0;
+ sds_ops.to_thread_alive = 0;
+ sds_ops.to_stop = 0;
+ sds_ops.to_pid_to_exec_file = NULL;
+ sds_ops.to_core_file_to_sym_file = NULL;
+ sds_ops.to_stratum = process_stratum;
+ sds_ops.DONT_USE = NULL;
+ sds_ops.to_has_all_memory = 1;
+ sds_ops.to_has_memory = 1;
+ sds_ops.to_has_stack = 1; /* to_has_stack */
+ sds_ops.to_has_registers = 1; sds_ops.to_has_execution = 1;
+ sds_ops.to_sections = NULL;
+ sds_ops.to_sections_end = NULL;
+ sds_ops.to_magic = OPS_MAGIC ;
+}
/* Put a command string, in args, out to the monitor and display the
reply message. */
void
_initialize_remote_sds ()
{
+ init_sds_ops() ;
add_target (&sds_ops);
add_show_from_set (add_set_cmd ("sdstimeout", no_class,
projects / deliverable / binutils-gdb.git / blobdiff