-/*
- - Remote debugging interface for Am290*0 running MiniMON monitor, for GDB.
- This is like remote.c but expects MiniMON to be running on the Am29000
- target hardware.
- - Originally written by Daniel Mann at AMD for gdb 3.91.6.
- - David Wood (wood@lab.ultra.nyu.edu) at New York University adapted this
- file to gdb 3.95. I was unable to get this working on sun3os4
- with termio, only with sgtty. Because we are only attempting to
- use this module to debug our kernel, which is already loaded when
- gdb is started up, I did not code up the file downloading facilities.
- As a result this module has only the stubs to download files.
- You should get tagged at compile time if you need to make any
- changes/additions.
-*- Daniel Mann at AMD took the 3.95 adaptions above and replaced
- MiniMON interface with UDI-p interface.
-
- Copyright (C) 1990 Free Software Foundation, Inc.
+/* Remote debugging interface for AMD 29k interfaced via UDI, for GDB.
+ Copyright 1990, 1992 Free Software Foundation, Inc.
+ Written by Daniel Mann. Contributed by AMD.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+/* This is like remote.c but uses the Universal Debug Interface (UDI) to
+ talk to the target hardware (or simulator). UDI is a TCP/IP based
+ protocol; for hardware that doesn't run TCP, an interface adapter
+ daemon talks UDI on one side, and talks to the hardware (typically
+ over a serial port) on the other side.
-#include <stdio.h>
+ - Originally written by Daniel Mann at AMD for MiniMON and gdb 3.91.6.
+ - David Wood (wood@lab.ultra.nyu.edu) at New York University adapted this
+ file to gdb 3.95. I was unable to get this working on sun3os4
+ with termio, only with sgtty. Because we are only attempting to
+ use this module to debug our kernel, which is already loaded when
+ gdb is started up, I did not code up the file downloading facilities.
+ As a result this module has only the stubs to download files.
+ You should get tagged at compile time if you need to make any
+ changes/additions.
+ - Daniel Mann at AMD took the 3.95 adaptions above and replaced
+ MiniMON interface with UDI-p interface. */
+
#include "defs.h"
#include "inferior.h"
#include "wait.h"
#include <string.h>
#include "terminal.h"
#include "target.h"
-#include "udiproc.h"
+#include "29k-share/udi/udiproc.h"
+#include "gdbcmd.h"
+#include "bfd.h"
/* access the register store directly, without going through
- the normal handler functions. This avoids an extra data copy
-*/
+ the normal handler functions. This avoids an extra data copy. */
-/* #define DEBUG 1 /* */
-#ifdef DEBUG
-# define DENTER(NAME) (printf("Entering %s\n",NAME), fflush(stdout))
-# define DEXIT(NAME) (printf("Exiting %s\n",NAME), fflush(stdout))
-#else
-# define DENTER(NAME)
-# define DEXIT(NAME)
-#endif
-
-
-extern char register_valid[];
+static int kiodebug;
extern int stop_soon_quietly; /* for wait_for_inferior */
extern struct value *call_function_by_hand();
-static void udi_resume();
-static void udi_fetch_registers ();
-static void udi_load();
-static int fetch_register ();
-static void udi_store_registers ();
-static int store_register ();
-static int regnum_to_srnum();
-static void udi_close ();
-static CPUSpace udi_memory_space();
-static int udi_write_inferior_memory();
-static int udi_read_inferior_memory();
+static void udi_resume PARAMS ((int step, int sig));
+static void udi_fetch_registers PARAMS ((int regno));
+static void udi_load PARAMS ((char *args, int from_tty));
+static void fetch_register PARAMS ((int regno));
+static void udi_store_registers PARAMS ((int regno));
+static int store_register PARAMS ((int regno));
+static int regnum_to_srnum PARAMS ((int regno));
+static void udi_close PARAMS ((int quitting));
+static CPUSpace udi_memory_space PARAMS ((CORE_ADDR addr));
+static int udi_write_inferior_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
+ int len));
+static int udi_read_inferior_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
+ int len));
+static void download PARAMS ((char *load_arg_string, int from_tty));
char CoffFileName[100] = "";
/*
* Processor types.
#define TYPE_A29050 3
static char *processor_name[] = { "Unknown", "Am29000", "Am29030", "Am29050" };
static int processor_type=TYPE_UNKNOWN;
-#define FREEZE_MODE (read_register(CPS_REGNUM) && 0x400)
+#define FREEZE_MODE (read_register(CPS_REGNUM) & 0x400)
#define USE_SHADOW_PC ((processor_type == TYPE_A29050) && FREEZE_MODE)
#define LLOG_FILE "udi.log"
/* Descriptor for I/O to remote machine. Initialize it to -1 so that
udi_open knows that we don't have a file open when the program
starts. */
- UDISessionId udi_session_id = -1;
- CPUOffset IMemStart = 0;
- CPUSizeT IMemSize = 0;
- CPUOffset DMemStart = 0;
- CPUSizeT DMemSize = 0;
- CPUOffset RMemStart = 0;
- CPUSizeT RMemSize = 0;
- UDIUInt32 CPUPRL;
- UDIUInt32 CoProcPRL;
+UDISessionId udi_session_id = -1;
+
+CPUOffset IMemStart = 0;
+CPUSizeT IMemSize = 0;
+CPUOffset DMemStart = 0;
+CPUSizeT DMemSize = 0;
+CPUOffset RMemStart = 0;
+CPUSizeT RMemSize = 0;
+UDIUInt32 CPUPRL;
+UDIUInt32 CoProcPRL;
+
+UDIMemoryRange address_ranges[2]; /* Text and data */
+UDIResource entry = {0, 0}; /* Entry point */
+CPUSizeT stack_sizes[2]; /* Regular and memory stacks */
#define SBUF_MAX 1024 /* maximum size of string handling buffer */
char sbuf[SBUF_MAX];
static bkpt_entry_t bkpt_table[BKPT_TABLE_SIZE];
extern char dfe_errmsg[]; /* error string */
-/*********************************************************** SIGNAL SUPPORT */
/* Called when SIGALRM signal sent due to alarm() timeout. */
#ifndef HAVE_TERMIO
-#ifndef __STDC__
-# ifndef volatile
-# define volatile /**/
-# endif
-#endif
volatile int n_alarms;
static void
/* malloc'd name of the program on the remote system. */
static char *prog_name = NULL;
-
/* Number of SIGTRAPs we need to simulate. That is, the next
NEED_ARTIFICIAL_TRAP calls to udi_wait should just return
SIGTRAP without actually waiting for anything. */
-/******************************************************* UDI_CREATE_INFERIOR */
/* This is called not only when we first attach, but also when the
user types "run" after having attached. */
+
static void
udi_create_inferior (execfile, args, env)
char *execfile;
char *args;
char **env;
{
- DENTER("udi_create_inferior()");
+ char *args1;
if (execfile)
- { if (prog_name != NULL)
- free (prog_name);
- prog_name = savestring (execfile, strlen (execfile));
- }
-
- if (prog_name == 0 /* || exec_bfd == 0 */ )
- error ("No exec file specified");
+ {
+ if (prog_name != NULL)
+ free (prog_name);
+ prog_name = savestring (execfile, strlen (execfile));
+ }
+ else if (entry.Offset)
+ execfile = "";
+ else
+ error ("No image loaded into target.");
- if (udi_session_id < 0){
- printf("UDI connection not open yet.\n");
- return;
- }
+ if (udi_session_id < 0)
+ {
+ printf("UDI connection not open yet.\n");
+ return;
+ }
inferior_pid = 40000;
-#if defined(ULTRA3) && defined(KERNEL_DEBUGGING)
- /* On ultra3 (NYU) we assume the kernel is already running so there is
- * no file to download
- */
-#else
- if(*args == '\0') args = prog_name;
- udi_load(args, 0);
-#endif /* !ULTRA3 */
-
- /* We will get a task spawn event immediately. */
-#ifdef NOTDEF /* start_remote() now does a wait without a resume
- so don't use it*/
- start_remote ();
-#else
+ if (!entry.Offset)
+ download(execfile, 0);
+
+ args1 = alloca (strlen(execfile) + strlen(args) + 2);
+
+ strcpy (args1, execfile);
+ strcat (args1, " ");
+ strcat (args1, args);
+
+ UDIInitializeProcess (address_ranges, /* ProcessMemory[] */
+ (UDIInt)2, /* NumberOfRanges */
+ entry, /* EntryPoint */
+ stack_sizes, /* *StackSizes */
+ (UDIInt)2, /* NumberOfStacks */
+ args1); /* ArgString */
+
init_wait_for_inferior ();
clear_proceed_status ();
proceed(-1,-1,0);
-#endif
- DEXIT("udi_create_inferior()");
}
-/******************************************************* UDI_MOURN_INFERIOR */
+
static void
udi_mourn()
{
- DENTER("udi_mourn()");
pop_target (); /* Pop back to no-child state */
generic_mourn_inferior ();
- DEXIT("udi_mourn()");
}
/******************************************************************** UDI_OPEN
** Open a connection to remote TIP.
NAME is the socket domain used for communication with the TIP,
then a space and the socket name or TIP-host name.
- '<udi_udi_config_id> [progname]' for example.
+ '<udi_udi_config_id>' for example.
*/
/* XXX - need cleanups for udiconnect for various failures!!! */
char *name;
int from_tty;
{
- unsigned int prl;
- char *p;
- int cnt;
+ unsigned int prl;
+ char *p;
+ int cnt;
UDIMemoryRange KnownMemory[10];
- UDIUInt32 ChipVersions[10];
- UDIInt NumberOfRanges = 10;
- UDIInt NumberOfChips = 10;
- UDIPId PId;
- UDIUInt32 TIPId, TargetId, DFEId, DFE, TIP, DFEIPCId, TIPIPCId;
-
- DENTER("udi_open()");
+ UDIUInt32 ChipVersions[10];
+ UDIInt NumberOfRanges = 10;
+ UDIInt NumberOfChips = 10;
+ UDIPId PId;
+ UDIUInt32 TIPId, TargetId, DFEId, DFE, TIP, DFEIPCId, TIPIPCId;
target_preopen(from_tty);
- /* Find the first whitespace character, it separates udi_config_id
- from prog_name. */
- if(!name) goto erroid;
- for (p = name;
- *p != '\0' && !isspace (*p); p++)
- ;
- if (*p == '\0')
-erroid:
- error("Usage: target udi config_id progname, where config_id appears in udi_soc file");
-
- udi_config_id = (char*)malloc (p - name + 1);
- strncpy (udi_config_id, name, p - name);
- udi_config_id[p - name] = '\0';
-
- /* Skip over the whitespace after udi_config_id */
- for (; isspace (*p); p++)
- /*EMPTY*/;
-
- if (prog_name != NULL)
- free (prog_name);
- prog_name = savestring (p, strlen (p));
+ entry.Offset = 0;
+
+ for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++)
+ bkpt_table[cnt].Type = 0;
+
+ if (udi_config_id)
+ free (udi_config_id);
- if (UDIConnect(udi_config_id, &udi_session_id))
+ if (!name)
+ error("Usage: target udi config_id, where config_id appears in udi_soc file");
+
+ udi_config_id = strdup (strtok (name, " \t"));
+
+ if (UDIConnect (udi_config_id, &udi_session_id))
error("UDIConnect() failed: %s\n", dfe_errmsg);
push_target (&udi_ops);
/*
** Initialize target configuration structure (global)
*/
- if(UDIGetTargetConfig( KnownMemory, &NumberOfRanges,
- ChipVersions, &NumberOfChips))
+ if (UDIGetTargetConfig (KnownMemory, &NumberOfRanges,
+ ChipVersions, &NumberOfChips))
error ("UDIGetTargetConfig() failed");
- if(NumberOfChips > 2)
- fprintf(stderr,"Taret has more than one processor\n");
- for(cnt=0; cnt<NumberOfRanges; cnt++)
- { switch(KnownMemory[cnt].Space)
+ if (NumberOfChips > 2)
+ fprintf(stderr,"Target has more than one processor\n");
+ for (cnt=0; cnt < NumberOfRanges; cnt++)
+ {
+ switch(KnownMemory[cnt].Space)
{
- default: fprintf(stderr, "UDIGetTargetConfig() unknown memory space\n");
- break;
+ default:
+ fprintf(stderr, "UDIGetTargetConfig() unknown memory space\n");
+ break;
case UDI29KCP_S:
- break;
+ break;
case UDI29KIROMSpace:
- RMemStart = KnownMemory[cnt].Offset;
- RMemSize = KnownMemory[cnt].Size;
- break;
+ RMemStart = KnownMemory[cnt].Offset;
+ RMemSize = KnownMemory[cnt].Size;
+ break;
case UDI29KIRAMSpace:
- IMemStart = KnownMemory[cnt].Offset;
- IMemSize = KnownMemory[cnt].Size;
- break;
+ IMemStart = KnownMemory[cnt].Offset;
+ IMemSize = KnownMemory[cnt].Size;
+ break;
case UDI29KDRAMSpace:
- DMemStart = KnownMemory[cnt].Offset;
- DMemSize = KnownMemory[cnt].Size;
- break;
+ DMemStart = KnownMemory[cnt].Offset;
+ DMemSize = KnownMemory[cnt].Size;
+ break;
}
- }
+ }
/* Determine the processor revision level */
- prl = (unsigned int)read_register(CFG_REGNUM) >> 24;
+ prl = (unsigned int)read_register (CFG_REGNUM) >> 24;
if ((prl&0xe0) == 0)
- { fprintf_filtered(stderr,
- "Remote debugging Am29000 rev %c\n",'A'+(prl&0x1f));
+ {
+ fprintf_filtered (stderr,
+ "Remote debugging Am29000 rev %c\n",'A'+(prl&0x1f));
processor_type = TYPE_A29000;
- } else if ((prl&0xe0) == 0x40) /* 29030 = 0x4* */
- { fprintf_filtered(stderr,
- "Remote debugging Am2903* rev %c\n",'A'+(prl&0x1f));
+ }
+ else if ((prl&0xe0) == 0x40) /* 29030 = 0x4* */
+ {
+ fprintf_filtered (stderr,
+ "Remote debugging Am2903* rev %c\n",'A'+(prl&0x1f));
processor_type = TYPE_A29030;
- } else if ((prl&0xe0) == 0x20) /* 29050 = 0x2* */
- { fprintf_filtered(stderr,
- "Remote debugging Am29050 rev %c\n",'A'+(prl&0x1f));
+ }
+ else if ((prl&0xe0) == 0x20) /* 29050 = 0x2* */
+ {
+ fprintf_filtered (stderr,
+ "Remote debugging Am29050 rev %c\n",'A'+(prl&0x1f));
processor_type = TYPE_A29050;
- } else {
+ }
+ else
+ {
processor_type = TYPE_UNKNOWN;
- fprintf_filtered(stderr,"WARNING: processor type unknown.\n");
- }
- if(UDICreateProcess(&PId))
+ fprintf_filtered (stderr,"WARNING: processor type unknown.\n");
+ }
+ if (UDICreateProcess (&PId))
fprintf(stderr, "UDICreateProcess() failed\n");
/* Print out some stuff, letting the user now what's going on */
- if(UDICapabilities( &TIPId, &TargetId, DFEId, DFE, &TIP, &DFEIPCId,
- &TIPIPCId, sbuf))
+ if (UDICapabilities (&TIPId, &TargetId, DFEId, DFE, &TIP, &DFEIPCId,
+ &TIPIPCId, sbuf))
error ("UDICapabilities() failed");
- if (from_tty) {
- printf_filtered("Remote debugging an %s connected via UDI socket,\n\
+ if (from_tty)
+ {
+ printf_filtered ("Remote debugging an %s connected via UDI socket,\n\
DFE-IPC version %x.%x.%x TIP-IPC version %x.%x.%x TIP version %x.%x.%x\n %s\n",
- processor_name[processor_type],
- (DFEIPCId>>8)&0xf, (DFEIPCId>>4)&0xf, DFEIPCId&0xf,
- (TIPIPCId>>8)&0xf, (TIPIPCId>>4)&0xf, TIPIPCId&0xf,
- (TargetId>>8)&0xf, (TargetId>>4)&0xf, TargetId&0xf,
- sbuf);
-#ifdef ULTRA3
- /* FIXME: can this restriction be removed? */
- printf_filtered("Remote debugging using virtual addresses works only\n");
- printf_filtered(" when virtual addresses map 1:1 to physical addresses.\n");
-#endif
- }
-#ifdef ULTRA3
- if (processor_type != TYPE_A29050) {
- fprintf_filtered(stderr,
- "Freeze-mode debugging can only be done on an Am29050,\n");
- fprintf_filtered(stderr,
- " unless GDB is being used with a 29K simulator.\n");
- }
-#endif
+ processor_name[processor_type],
+ (DFEIPCId>>8)&0xf, (DFEIPCId>>4)&0xf, DFEIPCId&0xf,
+ (TIPIPCId>>8)&0xf, (TIPIPCId>>4)&0xf, TIPIPCId&0xf,
+ (TargetId>>8)&0xf, (TargetId>>4)&0xf, TargetId&0xf,
+ sbuf);
+ }
}
/******************************************************************* UDI_CLOSE
udi_close (quitting) /*FIXME: how is quitting used */
int quitting;
{
- int Terminate = -1;
- DENTER("udi_close()");
-
if (udi_session_id < 0)
- error ("Can't close udi connection: not debugging remotely.");
+ return;
/* We should never get here if there isn't something valid in
- udi_session_id.
+ udi_session_id. */
- if(UDIDisconnect(udi_stream, Terminate);)
+ if (UDIDisconnect (udi_session_id, UDITerminateSession))
error ("UDIDisconnect() failed in udi_close");
/* Do not try to close udi_session_id again, later in the program. */
#endif
printf_filtered (" Ending remote debugging\n");
-
- DEXIT("udi_close()");
}
/**************************************************************** UDI_ATACH */
UDISizeT Size = 4;
UDICount CountDone;
UDIBool HostEndian = 0;
- DENTER("udi_attach()");
+ UDIError err;
if (udi_session_id < 0)
- printf ("UDI connection not opened yet, use the 'target udi' command.\n");
+ error ("UDI connection not opened yet, use the 'target udi' command.\n");
if (from_tty)
printf ("Attaching to remote program %s...\n", prog_name);
- mark_breakpoints_out ();
UDIStop();
- From.Space = 11;
- From.Offset = UDI29KSpecialRegs;
- if(UDIRead(From, &PC_adds, Count, Size, &CountDone, HostEndian))
+ From.Space = UDI29KSpecialRegs;
+ From.Offset = 11;
+ if (err = UDIRead(From, &PC_adds, Count, Size, &CountDone, HostEndian))
error ("UDIRead failed in udi_attach");
printf ("Remote process is now halted, pc1 = 0x%x.\n", PC_adds);
-
- DEXIT("udi_attach()");
}
/************************************************************* UDI_DETACH */
/* Terminate the open connection to the TIP process.
char *args;
int from_tty;
{
- DENTER("udi_dettach()");
+
remove_breakpoints(); /* Just in case there were any left in */
- if(UDIDisconnect(udi_session_id))
+
+ if (UDIDisconnect (udi_session_id, UDIContinueSession))
error ("UDIDisconnect() failed in udi_detach");
+
pop_target(); /* calls udi_close to do the real work */
+
if (from_tty)
printf ("Ending remote debugging\n");
- DEXIT("udi_dettach()");
}
udi_resume (step, sig)
int step, sig;
{
- UDIError tip_error;
- UDIUInt32 Steps = 1;
- UDIStepType StepType = UDIStepNatural;
- UDIRange Range;
- DENTER("udi_resume()");
+ UDIError tip_error;
+ UDIUInt32 Steps = 1;
+ UDIStepType StepType = UDIStepNatural;
+ UDIRange Range;
+
if (step) /* step 1 instruction */
- { tip_error = tip_error = UDIStep(Steps, StepType, Range);
- if(tip_error)fprintf(stderr, "UDIStep() error = %d\n", tip_error);
- if(tip_error)error ("failed in udi_resume");
+ {
+ tip_error = UDIStep (Steps, StepType, Range);
+ if (!tip_error)
+ return;
- }
- else
- { if(UDIExecute())
- error ("UDIExecute() failed in udi_resume");
- }
+ fprintf (stderr, "UDIStep() error = %d\n", tip_error);
+ error ("failed in udi_resume");
+ }
- DEXIT("udi_resume()");
+ if (UDIExecute())
+ error ("UDIExecute() failed in udi_resume");
}
/******************************************************************** UDI_WAIT
int old_immediate_quit = immediate_quit;
int i;
- DENTER("udi_wait()");
WSETEXIT ((*status), 0);
/* wait for message to arrive. It should be:
*/
timeout = 0; /* Wait indefinetly for a message */
immediate_quit = 1; /* Helps ability to QUIT */
+
while(1)
- {
- i = 0;
- MaxTime = UDIWaitForever;
- UDIWait(MaxTime, &PId, &StopReason);
- QUIT; /* Let user quit if they want */
- switch (StopReason & 0xff)
{
- default:
- goto halted;
- case UDIStdoutReady:
- if(UDIGetStdout(sbuf, (UDISizeT)SBUF_MAX, &CountDone))
- error("UDIGetStdin() failed in udi_wait");
- while(CountDone--)putc(sbuf[i++], stdout);
- fflush(stdout);
- break;
- case UDIStderrReady:
- UDIGetStderr(sbuf, (UDISizeT)SBUF_MAX, &CountDone);
- while(CountDone--)putc(sbuf[i++], stderr);
- fflush(stderr);
- fflush(stderr);
- break;
- case UDIStdinNeeded:
- printf("DEBUG: stdin requested ... continue\n");
-/* UDIPutStdin(sbuf, (UDISizeT)i, &CountDone); */
- break;
- case UDIStdinModeX:
- break;
- }
- continue;
- }
-halted:
- if (StopReason & 0xff == UDITrapped ) /* lower 8-bits == 0 */
- {
- if (StopReason >> 24 == 0)
- { printf("Am290*0 received vector number 0 (break point)\n");
- WSETSTOP ((*status), SIGTRAP);
- }
- else if (StopReason >> 24 == 1)
- { printf("Am290*0 received vector 1\n");
- WSETSTOP ((*status), SIGBUS);
- }
- else if (StopReason >> 24 == 3
- || StopReason >> 24 == 4)
- { printf("Am290*0 received vector number %d\n",
- StopReason >> 24);
- WSETSTOP ((*status), SIGFPE);
- }
- else if (StopReason >> 24 == 5)
- { printf("Am290*0 received vector number %d\n",
- StopReason >> 24);
- WSETSTOP ((*status), SIGILL);
- }
- else if (StopReason >> 24 >= 6
- && StopReason >> 24 <= 11)
- { printf("Am290*0 received vector number %d\n",
- StopReason >> 24);
- WSETSTOP ((*status), SIGSEGV);
- }
- else if (StopReason >> 24 == 12
- || StopReason >> 24 == 13)
- { printf("Am290*0 received vector number %d\n",
- StopReason >> 24);
- WSETSTOP ((*status), SIGILL);
- }
- else if ((StopReason & 0xff) == 14)
- { printf("Am290*0 received vector number %d\n",
- StopReason >> 24);
- WSETSTOP ((*status), SIGALRM);
- }
- else if ((StopReason & 0xff) == 15)
- WSETSTOP ((*status), SIGTRAP);
- else if ((StopReason >> 24) >= 16
- && (StopReason >> 24) <= 21)
- { printf("Am290*0 received vector number %d\n",
- StopReason >> 24);
- WSETSTOP ((*status), SIGINT);
- }
- else if ((StopReason & 0xff) == 22)
- { printf("Am290*0 received vector number %d\n",
- StopReason >> 24);
- WSETSTOP ((*status), SIGILL);
+ i = 0;
+ MaxTime = UDIWaitForever;
+ UDIWait(MaxTime, &PId, &StopReason);
+ QUIT; /* Let user quit if they want */
+
+ switch (StopReason & UDIGrossState)
+ {
+ case UDIStdoutReady:
+ if (UDIGetStdout (sbuf, (UDISizeT)SBUF_MAX, &CountDone))
+ error ("UDIGetStdout() failed in udi_wait");
+ fwrite (sbuf, 1, CountDone, stdout);
+ fflush(stdout);
+ continue;
+ case UDIStderrReady:
+ UDIGetStderr (sbuf, (UDISizeT)SBUF_MAX, &CountDone);
+ fwrite (sbuf, 1, CountDone, stderr);
+ fflush(stderr);
+ continue;
+ case UDIStdinNeeded:
+ scanf ("%s", sbuf);
+ i = strlen (sbuf);
+ UDIPutStdin (sbuf, (UDISizeT)i, &CountDone);
+ continue;
+ case UDIRunning:
+ /* In spite of the fact that we told UDIWait to wait forever, it will
+ return spuriously sometimes. */
+ case UDIStdinModeX:
+ continue;
+ default:
+ break;
+ }
+ break;
}
- else if ((StopReason & 0xff) == 77)
- WSETSTOP ((*status), SIGTRAP);
- else
-exit:
- WSETEXIT ((*status), 0);
- }
- else if ((StopReason & 0xff) == UDIBreak)
- WSETSTOP ((*status), SIGTRAP);
- else if ((StopReason & 0xff) == UDINotExecuting)
+
+ switch (StopReason & UDIGrossState)
+ {
+ case UDITrapped:
+ printf("Am290*0 received vector number %d\n", StopReason >> 24);
+
+ switch (StopReason >> 8)
+ {
+ case 0: /* Illegal opcode */
+ printf(" (break point)\n");
+ WSETSTOP ((*status), SIGTRAP);
+ break;
+ case 1: /* Unaligned Access */
+ WSETSTOP ((*status), SIGBUS);
+ break;
+ case 3:
+ case 4:
+ WSETSTOP ((*status), SIGFPE);
+ break;
+ case 5: /* Protection Violation */
+ WSETSTOP ((*status), SIGILL);
+ break;
+ case 6:
+ case 7:
+ case 8: /* User Instruction Mapping Miss */
+ case 9: /* User Data Mapping Miss */
+ case 10: /* Supervisor Instruction Mapping Miss */
+ case 11: /* Supervisor Data Mapping Miss */
+ WSETSTOP ((*status), SIGSEGV);
+ break;
+ case 12:
+ case 13:
+ WSETSTOP ((*status), SIGILL);
+ break;
+ case 14: /* Timer */
+ WSETSTOP ((*status), SIGALRM);
+ break;
+ case 15: /* Trace */
+ WSETSTOP ((*status), SIGTRAP);
+ break;
+ case 16: /* INTR0 */
+ case 17: /* INTR1 */
+ case 18: /* INTR2 */
+ case 19: /* INTR3/Internal */
+ case 20: /* TRAP0 */
+ case 21: /* TRAP1 */
+ WSETSTOP ((*status), SIGINT);
+ break;
+ case 22: /* Floating-Point Exception */
+ WSETSTOP ((*status), SIGILL);
+ break;
+ case 77: /* assert 77 */
+ WSETSTOP ((*status), SIGTRAP);
+ break;
+ default:
+ WSETEXIT ((*status), 0);
+ }
+ break;
+ case UDINotExecuting:
WSETSTOP ((*status), SIGTERM);
- else if ((StopReason & 0xff) == UDIRunning)
- WSETSTOP ((*status), SIGILL);
- else if ((StopReason & 0xff) == UDIStopped)
+ break;
+ case UDIStopped:
WSETSTOP ((*status), SIGTSTP);
- else if ((StopReason & 0xff) == UDIWarned)
- WSETSTOP ((*status), SIGLOST);
- else if ((StopReason & 0xff) == UDIStepped)
+ break;
+ case UDIWarned:
+ WSETSTOP ((*status), SIGURG);
+ break;
+ case UDIStepped:
+ case UDIBreak:
WSETSTOP ((*status), SIGTRAP);
- else if ((StopReason & 0xff) == UDIWaiting)
+ break;
+ case UDIWaiting:
WSETSTOP ((*status), SIGSTOP);
- else if ((StopReason & 0xff) == UDIHalted)
+ break;
+ case UDIHalted:
WSETSTOP ((*status), SIGKILL);
- else
- WSETEXIT ((*status), 0);
+ break;
+ case UDIExited:
+ default:
+ WSETEXIT ((*status), 0);
+ }
timeout = old_timeout; /* Restore original timeout value */
immediate_quit = old_immediate_quit;
- DEXIT("udi_wait()");
return 0;
}
UDISizeT Size = 4;
UDICount CountDone;
UDIBool HostEndian = 0;
+ UDIError err;
int i;
if (regno >= 0) {
From.Offset = 1;
To = (UDIUInt32 *)®isters[4 * GR1_REGNUM];
Count = 1;
- if (UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+ if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
register_valid[GR1_REGNUM] = 1;
From.Offset = 64;
To = (UDIUInt32 *)®isters[4 * GR64_REGNUM];
Count = 32;
- if (UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+ if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
for (i = GR64_REGNUM; i < GR64_REGNUM + 32; i++)
From.Offset = 96;
To = (UDIUInt32 *)®isters[4 * GR96_REGNUM];
Count = 32;
- if (UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+ if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
for (i = GR96_REGNUM; i < GR96_REGNUM + 32; i++)
From.Offset = 0;
To = (UDIUInt32 *)®isters[4 * LR0_REGNUM];
Count = 128;
- if (UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+ if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
for (i = LR0_REGNUM; i < LR0_REGNUM + 128; i++)
From.Offset = 0;
To = (UDIUInt32 *)®isters[4 * SR_REGNUM(0)];
Count = 15;
- if (UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+ if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
for (i = SR_REGNUM(0); i < SR_REGNUM(0) + 15; i++)
From.Offset = 128;
To = (UDIUInt32 *)®isters[4 * SR_REGNUM(128)];
Count = 135-128 + 1;
- if (UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+ if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
for (i = SR_REGNUM(128); i < SR_REGNUM(128) + 135-128+1; i++)
register_valid[i] = 1;
}
+ if (kiodebug)
+ {
+ printf("Fetching all registers\n");
+ printf("Fetching PC0 = 0x%x, PC1 = 0x%x, PC2 = 0x%x\n",
+ read_register(NPC_REGNUM), read_register(PC_REGNUM),
+ read_register(PC2_REGNUM));
+ }
+
/* There doesn't seem to be any way to get these. */
{
int val = -1;
return;
}
+ if (kiodebug)
+ {
+ printf("Storing all registers\n");
+ printf("PC0 = 0x%x, PC1 = 0x%x, PC2 = 0x%x\n", read_register(NPC_REGNUM),
+ read_register(PC_REGNUM), read_register(PC2_REGNUM));
+ }
+
/* Gr1/rsp */
From = (UDIUInt32 *)®isters[4 * GR1_REGNUM];
error("UDIClearBreakpoint returned error code %d\n", err);
}
-/***************************************************************** UDI_KILL */
static void
udi_kill(arg,from_tty)
-char *arg;
-int from_tty;
+ char *arg;
+ int from_tty;
{
- char buf[4];
- DENTER("udi_kill()");
-#if defined(ULTRA3) && defined(KERNEL_DEBUGGING)
- /* We don't ever kill the kernel */
- if (from_tty) {
- printf_filtered("Kernel not killed, but left in current state.\n");
- printf_filtered("Use detach to leave kernel running.\n");
- }
-#else
- UDIStop();
- inferior_pid = 0;
- if (from_tty) {
- printf("Target has been stopped.");
- }
- pop_target();
-#endif
- DEXIT("udi_kill()");
-}
+#if 0
+/*
+UDIStop does not really work as advertised. It causes the TIP to close it's
+connection, which usually results in GDB dying with a SIGPIPE. For now, we
+just invoke udi_close, which seems to get things right.
+*/
+ UDIStop();
+ udi_session_id = -1;
+ inferior_pid = 0;
+ if (from_tty)
+ printf("Target has been stopped.");
+#else
+ udi_close(0);
+#endif
+ pop_target();
+}
-/***************************************************************** UDI_LOAD */
/*
- * Load a program into the target.
- */
+ Load a program into the target. Args are: `program {options}'. The options
+ are used to control loading of the program, and are NOT passed onto the
+ loaded code as arguments. (You need to use the `run' command to do that.)
+
+ The options are:
+ -ms %d Set mem stack size to %d
+ -rs %d Set regular stack size to %d
+ -i send init info (default)
+ -noi don't send init info
+ -[tT] Load Text section
+ -[dD] Load Data section
+ -[bB] Load BSS section
+ -[lL] Load Lit section
+ */
+
static void
-udi_load(arg_string,from_tty)
-char *arg_string;
-int from_tty;
+download(load_arg_string, from_tty)
+ char *load_arg_string;
+ int from_tty;
{
-#define MAX_TOKENS 25
-#define BUFFER_SIZE 256
- int token_count;
- char *token[MAX_TOKENS];
- char cmd_line[BUFFER_SIZE];
+#define DEFAULT_MEM_STACK_SIZE 0x6000
+#define DEFAULT_REG_STACK_SIZE 0x2000
+
+ char *token;
+ char *filename;
+ asection *section;
+ bfd *pbfd;
+ UDIError err;
+ int load_text = 1, load_data = 1, load_bss = 1, load_lit = 1;
+
+ address_ranges[0].Space = UDI29KIRAMSpace;
+ address_ranges[0].Offset = 0xffffffff;
+ address_ranges[0].Size = 0;
+
+ address_ranges[1].Space = UDI29KDRAMSpace;
+ address_ranges[1].Offset = 0xffffffff;
+ address_ranges[1].Size = 0;
+
+ stack_sizes[0] = DEFAULT_REG_STACK_SIZE;
+ stack_sizes[1] = DEFAULT_MEM_STACK_SIZE;
dont_repeat ();
-#if defined(KERNEL_DEBUGGING) && defined(ULTRA3)
- printf("The kernel had better be loaded already! Loading not done.\n");
-#else
- if (arg_string == 0)
- error ("The load command takes a file name");
- arg_string = tilde_expand (arg_string);
- sprintf(cmd_line,"y %s %s", prog_name, arg_string);
-
- token_count = 0;
- token[0] = cmd_line;
-
- if (cmd_line[0] != '\0')
- { token[token_count] = strtok(cmd_line, " \t,;\n\r");
-
- if (token[token_count] != NULL)
- { do {
- token_count = token_count + 1;
- token[token_count] = strtok((char *) NULL, " \t,;\n\r");
- } while ((token[token_count] != NULL) &&
- (token_count < MAX_TOKENS));
+ filename = strtok(load_arg_string, " \t");
+ if (!filename)
+ error ("Must specify at least a file name with the load command");
+
+ filename = tilde_expand (filename);
+ make_cleanup (free, filename);
+
+ while (token = strtok (NULL, " \t"))
+ {
+ if (token[0] == '-')
+ {
+ token++;
+
+ if (STREQ (token, "ms"))
+ stack_sizes[1] = atol (strtok (NULL, " \t"));
+ else if (STREQ (token, "rs"))
+ stack_sizes[0] = atol (strtok (NULL, " \t"));
+ else
+ {
+ load_text = load_data = load_bss = load_lit = 0;
+
+ while (*token)
+ {
+ switch (*token++)
+ {
+ case 't':
+ case 'T':
+ load_text = 1;
+ break;
+ case 'd':
+ case 'D':
+ load_data = 1;
+ break;
+ case 'b':
+ case 'B':
+ load_bss = 1;
+ break;
+ case 'l':
+ case 'L':
+ load_lit = 1;
+ break;
+ default:
+ error ("Unknown UDI load option -%s", token-1);
+ }
+ }
+ }
+ }
}
- else
- *token[0] = '\0';
- }
- make_cleanup (free, arg_string);
+
+ pbfd = bfd_openr (filename, 0);
+
+ if (!pbfd)
+ perror_with_name (filename);
+
+ make_cleanup (bfd_close, pbfd);
+
QUIT;
immediate_quit++;
- if(yank_cmd(token, token_count))
- error("Failure when tring to load program");
+
+ if (!bfd_check_format (pbfd, bfd_object))
+ error ("It doesn't seem to be an object file");
+
+ for (section = pbfd->sections; section; section = section->next)
+ {
+ if (bfd_get_section_flags (pbfd, section) & SEC_ALLOC)
+ {
+ UDIResource To;
+ UDICount Count;
+ unsigned long section_size, section_end;
+ const char *section_name;
+
+ section_name = bfd_get_section_name (pbfd, section);
+ if (STREQ (section_name, ".text") && !load_text)
+ continue;
+ else if (STREQ (section_name, ".data") && !load_data)
+ continue;
+ else if (STREQ (section_name, ".bss") && !load_bss)
+ continue;
+ else if (STREQ (section_name, ".lit") && !load_lit)
+ continue;
+
+ To.Offset = bfd_get_section_vma (pbfd, section);
+ section_size = bfd_section_size (pbfd, section);
+ section_end = To.Offset + section_size;
+
+ printf("[Loading section %s at %x (%d bytes)]\n",
+ section_name,
+ To.Offset,
+ section_size);
+
+ if (bfd_get_section_flags (pbfd, section) & SEC_CODE)
+ {
+ To.Space = UDI29KIRAMSpace;
+
+ address_ranges[0].Offset = min (address_ranges[0].Offset,
+ To.Offset);
+ address_ranges[0].Size = max (address_ranges[0].Size,
+ section_end
+ - address_ranges[0].Offset);
+ }
+ else
+ {
+ To.Space = UDI29KDRAMSpace;
+
+ address_ranges[1].Offset = min (address_ranges[1].Offset,
+ To.Offset);
+ address_ranges[1].Size = max (address_ranges[1].Size,
+ section_end
+ - address_ranges[1].Offset);
+ }
+
+ if (bfd_get_section_flags (pbfd, section) & SEC_LOAD) /* Text, data or lit */
+ {
+ file_ptr fptr;
+
+ fptr = 0;
+
+ while (section_size > 0)
+ {
+ char buffer[1024];
+
+ Count = min (section_size, 1024);
+
+ bfd_get_section_contents (pbfd, section, buffer, fptr,
+ Count);
+
+ err = UDIWrite ((UDIHostMemPtr)buffer, /* From */
+ To, /* To */
+ Count, /* Count */
+ (UDISizeT)1, /* Size */
+ &Count, /* CountDone */
+ (UDIBool)0); /* HostEndian */
+ if (err)
+ error ("UDIWrite failed, error = %d", err);
+
+ To.Offset += Count;
+ fptr += Count;
+ section_size -= Count;
+ }
+ }
+ else /* BSS */
+ {
+ UDIResource From;
+ unsigned long zero = 0;
+
+ /* Write a zero byte at the vma */
+ err = UDIWrite ((UDIHostMemPtr)&zero, /* From */
+ To, /* To */
+ (UDICount)1, /* Count */
+ (UDISizeT)4, /* Size */
+ &Count, /* CountDone */
+ (UDIBool)0); /* HostEndian */
+ if (err)
+ error ("UDIWrite failed, error = %d", err);
+
+ From = To;
+ To.Offset+=4;
+
+ /* Now, duplicate it for the length of the BSS */
+ err = UDICopy (From, /* From */
+ To, /* To */
+ (UDICount)(section_size/4 - 1), /* Count */
+ (UDISizeT)4, /* Size */
+ &Count, /* CountDone */
+ (UDIBool)1); /* Direction */
+ if (err)
+ {
+ char message[100];
+ int xerr;
+
+ xerr = UDIGetErrorMsg(err, 100, message, &Count);
+ if (!xerr)
+ fprintf (stderr, "Error is %s\n", message);
+ else
+ fprintf (stderr, "xerr is %d\n", xerr);
+ error ("UDICopy failed, error = %d", err);
+ }
+ }
+
+ }
+ }
+
+ entry.Space = UDI29KIRAMSpace;
+ entry.Offset = bfd_get_start_address (pbfd);
+
immediate_quit--;
- symbol_file_add (arg_string, from_tty, 0, 0, 0, 0);/*DEBUG need to add text_addr */
-#endif
+}
+
+/* User interface to download an image into the remote target. See download()
+ * for details on args.
+ */
+static void
+udi_load(args, from_tty)
+ char *args;
+ int from_tty;
+{
+ download (args, from_tty);
+
+ symbol_file_add (strtok (args, " \t"), from_tty, 0, 0, 0, 0);
}
/*************************************************** UDI_WRITE_INFERIOR_MEMORY
UDICount CountDone = 0;
UDIBool HostEndian = 0;
-
- /* DENTER("udi_write_inferior_memory()"); */
- To.Space = udi_memory_space(memaddr);
+ To.Space = udi_memory_space(memaddr);
From = (UDIUInt32*)myaddr;
while (nwritten < len)
From += CountDone;
}
}
- /* DEXIT("udi_write_inferior_memory()"); */
return(nwritten);
}
UDISizeT Size = 1;
UDICount CountDone = 0;
UDIBool HostEndian = 0;
+ UDIError err;
-
- /* DENTER("udi_read_inferior_memory()"); */
From.Space = udi_memory_space(memaddr);
To = (UDIUInt32*)myaddr;
{ Count = len - nread;
if (Count > MAXDATA) Count = MAXDATA;
From.Offset = memaddr + nread;
- if(UDIRead(From, To, Count, Size, &CountDone, HostEndian))
- { error("UDIWrite() failed in udi_read_inferrior_memory");
+ if(err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+ { error("UDIRead() failed in udi_read_inferrior_memory");
break;
}
else
/* Fetch a single register indicatated by 'regno'.
* Returns 0/-1 on success/failure.
*/
-static int
+static void
fetch_register (regno)
int regno;
{
UDISizeT Size = 4;
UDICount CountDone;
UDIBool HostEndian = 0;
+ UDIError err;
int result;
if (regno == GR1_REGNUM)
{
int val = -1;
supply_register(160 + (regno - FPE_REGNUM),(char *) &val);
- return 0; /* Pretend Success */
+ return; /* Pretend Success */
}
else
{
From.Offset = regnum_to_srnum(regno);
}
- if (UDIRead(From, &To, Count, Size, &CountDone, HostEndian))
+ if (err = UDIRead(From, &To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
supply_register(regno, (char *) &To);
- return result;
+
+ if (kiodebug)
+ printf("Fetching register %s = 0x%x\n", reg_names[regno], To);
}
/*****************************************************************************/
/* Store a single register indicated by 'regno'.
UDICount CountDone;
UDIBool HostEndian = 0;
- DENTER("store_register()");
From = read_register (regno); /* get data value */
+ if (kiodebug)
+ printf("Storing register %s = 0x%x\n", reg_names[regno], From);
+
if (regno == GR1_REGNUM)
{ To.Space = UDI29KGlobalRegs;
To.Offset = 1;
result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian);
}
- DEXIT("store_register()");
if(result)
{ result = -1;
error("UDIWrite() failed in store_registers");
*/
static CPUSpace
udi_memory_space(addr)
-CORE_ADDR *addr;
+CORE_ADDR addr;
{
UDIUInt32 tstart = IMemStart;
UDIUInt32 tend = tstart + IMemSize;
* Define the target subroutine names
*/
static struct target_ops udi_ops = {
- "udi", "Remote UDI connected TIP",
- "Remote debug an Am290*0 using socket connection to TIP process ",
- udi_open, udi_close,
- udi_attach, udi_detach, udi_resume, udi_wait,
- udi_fetch_registers, udi_store_registers,
- udi_prepare_to_store, 0, 0, /* conv_to, conv_from */
+ "udi",
+ "Remote UDI connected TIP",
+ "Remote debug an AMD 29k using UDI socket connection to TIP process",
+ udi_open,
+ udi_close,
+ udi_attach,
+ udi_detach,
+ udi_resume,
+ udi_wait,
+ udi_fetch_registers,
+ udi_store_registers,
+ udi_prepare_to_store,
udi_xfer_inferior_memory,
udi_files_info,
- udi_insert_breakpoint, udi_remove_breakpoint, /* Breakpoints */
- 0, 0, 0, 0, 0, /* Terminal handling */
+ udi_insert_breakpoint,
+ udi_remove_breakpoint,
+ 0, /* termial_init */
+ 0, /* terminal_inferior */
+ 0, /* terminal_ours_for_output */
+ 0, /* terminal_ours */
+ 0, /* terminal_info */
udi_kill, /* FIXME, kill */
udi_load,
0, /* lookup_symbol */
- udi_create_inferior, /* create_inferior */
- udi_mourn, /* mourn_inferior FIXME */
- process_stratum, 0, /* next */
- 1, 1, 1, 1, 1, /* all mem, mem, stack, regs, exec */
- 0, 0, /* Section pointers */
+ udi_create_inferior,
+ udi_mourn, /* mourn_inferior FIXME */
+ 0, /* can_run */
+ 0, /* notice_signals */
+ process_stratum,
+ 0, /* next */
+ 1, /* has_all_memory */
+ 1, /* has_memory */
+ 1, /* has_stack */
+ 1, /* has_registers */
+ 1, /* has_execution */
+ 0, /* sections */
+ 0, /* sections_end */
OPS_MAGIC, /* Always the last thing */
};
void _initialize_remote_udi()
{
add_target (&udi_ops);
+ add_show_from_set (
+ add_set_cmd ("remotedebug", no_class, var_boolean,
+ (char *)&kiodebug,
+ "Set debugging of UDI I/O.\n\
+When enabled, debugging info is displayed.",
+ &setlist),
+ &showlist);
}
#ifdef NO_HIF_SUPPORT