* coff-h8300.c (h8300_reloc16_extra_cases): Make name a const

[deliverable/binutils-gdb.git] / gdb / remote-utils.c

diff --git a/gdb/remote-utils.c b/gdb/remote-utils.c
index f4f25e4c490cc8d3851f50c7b0bd34d94b29f77c..cbbdeaf2d01839da0d2e41dbd0d3da6d114c2d4c 100644 (file)
--- a/gdb/remote-utils.c
+++ b/gdb/remote-utils.c
@@ -1,6 +1,6 @@
 /* Generic support for remote debugging interfaces.
 
-   Copyright 1993 Free Software Foundation, Inc.
+   Copyright 1993, 1994 Free Software Foundation, Inc.
 
 This file is part of GDB.
 
@@ -16,7 +16,7 @@ GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 
 /*  This file actually contains two distinct logical "packages".  They
     are packaged together in this one file because they are typically
@@ -37,13 +37,12 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
    * a pass through mode a la kermit or telnet.
    * autobaud.
    * ask remote to change his baud rate.
-   * put generic load here.
-
    */
 
 #include <ctype.h>
 
 #include "defs.h"
+#include "gdb_string.h"
 #include "gdbcmd.h"
 #include "target.h"
 #include "serial.h"
@@ -76,12 +75,10 @@ usage(proto, junk)
      char *junk;
 {
   if (junk != NULL)
-    fprintf(stderr, "Unrecognized arguments: `%s'.\n", junk);
-
-  /* FIXME-now: service@host? */
+    fprintf_unfiltered(gdb_stderr, "Unrecognized arguments: `%s'.\n", junk);
 
-  error("Usage: target %s <device <speed <debug>>>\n\
-or target %s <host> <port>\n", proto, proto);
+  error ("Usage: target %s [DEVICE [SPEED [DEBUG]]]\n\
+where DEVICE is the name of a device or HOST:PORT", proto, proto);
 
   return;
 }
@@ -105,8 +102,6 @@ sr_scan_args(proto, args)
   int n;
   char *p, *q;
 
-  extern int strtol();
-
   /* if no args, then nothing to do. */
   if (args == NULL || *args == '\0')
     return;
@@ -126,7 +121,7 @@ sr_scan_args(proto, args)
 
   /* check for missing or empty baud rate.  */
   CHECKDONE(p, q);
-  sr_set_baud_rate(n);
+  baud_rate = n;
 
   /* look for debug value.  */
   n = strtol(p, &q, 10);
@@ -169,14 +164,24 @@ gr_open(args, from_tty, gr)
   if (sr_get_desc() != NULL)
     gr_close (0);
 
+  /* If no args are specified, then we use the device specified by a
+     previous command or "set remotedevice".  But if there is no
+     device, better stop now, not dump core.  */
+
+  if (sr_get_device () == NULL)
+    usage (gr->ops->to_shortname, NULL);
+
   sr_set_desc(SERIAL_OPEN (sr_get_device()));
   if (!sr_get_desc())
     perror_with_name((char *) sr_get_device());
 
-  if (SERIAL_SETBAUDRATE(sr_get_desc(), sr_get_baud_rate()) != 0)
+  if (baud_rate != -1)
     {
-      SERIAL_CLOSE(sr_get_desc());
-      perror_with_name(sr_get_device());
+      if (SERIAL_SETBAUDRATE(sr_get_desc(), baud_rate) != 0)
+       {
+         SERIAL_CLOSE(sr_get_desc());
+         perror_with_name(sr_get_device());
+       }
     }
 
   SERIAL_RAW (sr_get_desc());
@@ -194,8 +199,13 @@ gr_open(args, from_tty, gr)
     gr_settings->clear_all_breakpoints = remove_breakpoints;
 
   if (from_tty)
-      printf_filtered ("Remote debugging using `%s' at baud rate of %d\n",
-                      sr_get_device(), sr_get_baud_rate());
+    {
+      printf_filtered ("Remote debugging using `%s'", sr_get_device ());
+      if (baud_rate != -1)
+       printf_filtered (" at baud rate of %d",
+                        baud_rate);
+      printf_filtered ("\n");
+    }
 
   push_target(gr->ops);
   gr_checkin();
@@ -217,7 +227,7 @@ sr_readchar ()
     error ("Timeout reading from remote system.");
 
   if (sr_get_debug() > 0)
-    printf ("%c", buf);
+    printf_unfiltered ("%c", buf);
 
   return buf & 0x7f;
 }
@@ -232,9 +242,9 @@ sr_pollchar()
     buf = 0;
   if (sr_get_debug() > 0)
     if (buf)
-      printf ("%c", buf);
+      printf_unfiltered ("%c", buf);
     else
-      printf ("<empty character poll>");
+      printf_unfiltered ("<empty character poll>");
 
   return buf & 0x7f;
 }
@@ -276,7 +286,7 @@ sr_write (a, l)
 
   if (sr_get_debug() > 0)
     for (i = 0; i < l; i++)
-      printf ("%c", a[i]);
+      printf_unfiltered ("%c", a[i]);
 
   return;
 }
@@ -384,6 +394,7 @@ sr_com (args, fromtty)
 
   sr_write_cr (args);
   sr_write ("\030", 1);
+  registers_changed ();
   gr_expect_prompt ();
 }
 
@@ -432,22 +443,20 @@ void
 gr_files_info (ops)
      struct target_ops *ops;
 {
-  char *file = "nothing";
-
-  if (exec_bfd)
-    file = bfd_get_filename (exec_bfd);
-
-  if (exec_bfd)
-    {
 #ifdef __GO32__
-      printf_filtered ("\tAttached to DOS asynctsr\n");
+  printf_filtered ("\tAttached to DOS asynctsr\n");
 #else
-      printf_filtered ("\tAttached to %s at %d baud\n",
-                      sr_get_device(), sr_get_baud_rate());
+  printf_filtered ("\tAttached to %s", sr_get_device());
+  if (baud_rate != -1)
+    printf_filtered ("at %d baud", baud_rate);
+  printf_filtered ("\n");
 #endif
-    }
 
-  printf_filtered ("\tand running program %s\n", file);
+  if (exec_bfd)
+    {
+      printf_filtered ("\tand running program %s\n",
+                      bfd_get_filename (exec_bfd));
+    }
   printf_filtered ("\tusing the %s protocol.\n", ops->to_shortname);
 }
 
@@ -573,9 +582,9 @@ gr_multi_scan (list, passthrough)
          if (passthrough)
            {
              for (p = swallowed; p < swallowed_p; ++p)
-               putc (*p, stdout);
+               fputc_unfiltered (*p, gdb_stdout);
 
-             putc (ch, stdout);
+             fputc_unfiltered (ch, gdb_stdout);
            }
 
          swallowed_p = swallowed;
@@ -623,14 +632,6 @@ gr_store_word (addr, word)
 void
 _initialize_sr_support ()
 {
-/* FIXME-now: if target is open when baud changes... */
-  add_show_from_set (add_set_cmd ("remotebaud", no_class,
-                                 var_zinteger, (char *)&baud_rate,
-                                 "Set baud rate for remote serial I/O.\n\
-This value is used to set the speed of the serial port when debugging\n\
-using remote targets.", &setlist),
-                    &showlist);
-
 /* FIXME-now: if target is open... */
   add_show_from_set (add_set_cmd ("remotedevice", no_class,
                                  var_filename, (char *)&sr_settings.device,