#include "command.h"
#include "symtab.h"
#include "complaints.h"
+#include "gdbcmd.h"
#include <string.h>
#include <errno.h>
struct ldfile ldstruct;
struct timeval load_timeout;
- bzero ((char *) &ldstruct, sizeof (ldstruct));
+ memset ((char *) &ldstruct, '\0', sizeof (ldstruct));
/* We invoke clnt_call () here directly, instead of through
net_clnt_call (), because we need to set a large timeout value.
Rptrace ptrace_in; /* XXX This is stupid. It doesn't need to be a ptrace
structure. How about something smaller? */
- bzero ((char *) &ptrace_in, sizeof (ptrace_in));
+ memset ((char *) &ptrace_in, '\0', sizeof (ptrace_in));
break_status = 0;
ptrace_in.addr = addr;
arg_array passArgs;
TASK_START taskStart;
- bzero ((char *) &passArgs, sizeof (passArgs));
- bzero ((char *) &taskStart, sizeof (taskStart));
+ memset ((char *) &passArgs, '\0', sizeof (passArgs));
+ memset ((char *) &taskStart, '\0', sizeof (taskStart));
/* parse arguments, put them in passArgs */
vx_running = savestring (passArgs.arg_array_val[0],
strlen (passArgs.arg_array_val[0]));
-#ifdef CREATE_INFERIOR_HOOK
- CREATE_INFERIOR_HOOK (pid);
-#endif
-
push_target (&vx_run_ops);
inferior_pid = taskStart.pid;
stop_soon_quietly = 0;
/* insert_step_breakpoint (); FIXME, do we need this? */
- proceed(-1, -1, 0);
+ proceed (-1, TARGET_SIGNAL_DEFAULT, 0);
}
/* Fill ARGSTRUCT in argc/argv form with the arguments from the
register int arg_index = 0;
register char *p0;
- bzero ((char *) arg_struct, sizeof (arg_array));
+ memset ((char *) arg_struct, '\0', sizeof (arg_array));
/* first count how many arguments there are */
int pid;
enum clnt_stat status;
- bzero ((char *) pEvent, sizeof (RDB_EVENT));
+ memset ((char *) pEvent, '\0', sizeof (RDB_EVENT));
pid = inferior_pid;
status = net_clnt_call (PROCESS_WAIT, xdr_int, &pid, xdr_RDB_EVENT, pEvent);
C_bytes out_data;
extern char registers[];
- bzero ((char *) &ptrace_in, sizeof (ptrace_in));
- bzero ((char *) &ptrace_out, sizeof (ptrace_out));
+ memset ((char *) &ptrace_in, '\0', sizeof (ptrace_in));
+ memset ((char *) &ptrace_out, '\0', sizeof (ptrace_out));
/* FIXME, eventually only get the ones we need. */
registers_fetched ();
}
else
{
- bzero (®isters[REGISTER_BYTE (FP0_REGNUM)], VX_SIZE_FPREGS);
+ memset (®isters[REGISTER_BYTE (FP0_REGNUM)], '\0', VX_SIZE_FPREGS);
}
#endif /* VX_SIZE_FPREGS */
}
Rptrace ptrace_in;
Ptrace_return ptrace_out;
- bzero ((char *) &ptrace_in, sizeof (ptrace_in));
- bzero ((char *) &ptrace_out, sizeof (ptrace_out));
+ memset ((char *) &ptrace_in, '\0', sizeof (ptrace_in));
+ memset ((char *) &ptrace_out, '\0', sizeof (ptrace_out));
ptrace_in.pid = inferior_pid;
ptrace_in.info.ttype = DATA;
in_data.bytes = registers;
- in_data.len = VX_NUM_REGS * sizeof (REGISTER_TYPE);
+ in_data.len = VX_NUM_REGS * REGISTER_SIZE;
/* XXX change second param to be a proc number */
status = net_ptrace_clnt_call (PTRACE_SETREGS, &ptrace_in, &ptrace_out);
Ptrace_return ptrace_out;
C_bytes data;
- bzero ((char *) &ptrace_in, sizeof (ptrace_in));
- bzero ((char *) &ptrace_out, sizeof (ptrace_out));
+ memset ((char *) &ptrace_in, '\0', sizeof (ptrace_in));
+ memset ((char *) &ptrace_out, '\0', sizeof (ptrace_out));
ptrace_in.pid = inferior_pid; /* XXX pid unnecessary for READDATA */
ptrace_in.addr = (int) memaddr; /* Where from */
static void
vx_files_info ()
{
- printf ("\tAttached to host `%s'", vx_host);
- printf (", which has %sfloating point", target_has_fp? "": "no ");
- printf (".\n");
+ printf_unfiltered ("\tAttached to host `%s'", vx_host);
+ printf_unfiltered (", which has %sfloating point", target_has_fp? "": "no ");
+ printf_unfiltered (".\n");
}
static void
vx_run_files_info ()
{
- printf ("\tRunning %s VxWorks process %s",
- vx_running? "child": "attached",
- local_hex_string(inferior_pid));
+ printf_unfiltered ("\tRunning %s VxWorks process %s",
+ vx_running ? "child" : "attached",
+ local_hex_string (inferior_pid));
if (vx_running)
- printf (", function `%s'", vx_running);
- printf(".\n");
+ printf_unfiltered (", function `%s'", vx_running);
+ printf_unfiltered(".\n");
}
static void
-vx_resume (step, siggnal)
+vx_resume (pid, step, siggnal)
+ int pid;
int step;
- int siggnal;
+ enum target_signal siggnal;
{
int status;
Rptrace ptrace_in;
Ptrace_return ptrace_out;
+ if (pid == -1)
+ pid = inferior_pid;
+
if (siggnal != 0 && siggnal != stop_signal)
error ("Cannot send signals to VxWorks processes");
- bzero ((char *) &ptrace_in, sizeof (ptrace_in));
- bzero ((char *) &ptrace_out, sizeof (ptrace_out));
+ memset ((char *) &ptrace_in, '\0', sizeof (ptrace_in));
+ memset ((char *) &ptrace_out, '\0', sizeof (ptrace_out));
- ptrace_in.pid = inferior_pid;
+ ptrace_in.pid = pid;
ptrace_in.addr = 1; /* Target side insists on this, or it panics. */
/* XXX change second param to be a proc number */
{
enum clnt_stat status;
- bzero ((char *) pLoadTable, sizeof (struct ldtabl));
+ memset ((char *) pLoadTable, '\0', sizeof (struct ldtabl));
status = net_clnt_call (VX_STATE_INQ, xdr_void, 0, xdr_ldtabl, pLoadTable);
return (status == RPC_SUCCESS) ? 0 : -1;
SYMBOL_ADDR symbolAddr;
*pAddr = 0;
- bzero ((char *) &symbolAddr, sizeof (symbolAddr));
+ memset ((char *) &symbolAddr, '\0', sizeof (symbolAddr));
status = net_clnt_call (VX_SYMBOL_INQ, xdr_wrapstring, &name,
xdr_SYMBOL_ADDR, &symbolAddr);
addr = * (unsigned long *) destHost->h_addr;
}
- bzero (&destAddr, sizeof (destAddr));
+ memset (&destAddr, '\0', sizeof (destAddr));
destAddr.sin_addr.s_addr = addr;
destAddr.sin_family = AF_INET;
*/
static int
-vx_wait (status)
- int *status;
+vx_wait (pid_to_wait_for, status)
+ int pid_to_wait_for;
+ struct target_waitstatus *status;
{
register int pid;
- WAITTYPE w;
RDB_EVENT rdbEvent;
int quit_failed;
sleep_ms (200); /* FIXME Don't kill the network too badly */
}
else if (pid != inferior_pid)
- fatal ("Bad pid for debugged task: %s\n", local_hex_string(pid));
+ fatal ("Bad pid for debugged task: %s\n",
+ local_hex_string((unsigned long) pid));
} while (pid == 0);
- /* FIXME, eventually do more then SIGTRAP on everything... */
+ /* The mostly likely kind. */
+ status->kind = TARGET_WAITKIND_STOPPED;
+
switch (rdbEvent.eventType)
{
case EVENT_EXIT:
- WSETEXIT (w, 0);
+ status->kind = TARGET_WAITKIND_EXITED;
/* FIXME is it possible to distinguish between a
- XXX normal vs abnormal exit in VxWorks? */
+ normal vs abnormal exit in VxWorks? */
+ status->value.integer = 0;
break;
- case EVENT_START: /* Task was just started. */
- WSETSTOP (w, SIGTRAP);
+ case EVENT_START:
+ /* Task was just started. */
+ status->value.sig = TARGET_SIGNAL_TRAP;
break;
case EVENT_STOP:
- WSETSTOP (w, SIGTRAP);
+ status->value.sig = TARGET_SIGNAL_TRAP;
/* XXX was it stopped by a signal? act accordingly */
break;
case EVENT_BREAK: /* Breakpoint was hit. */
- WSETSTOP (w, SIGTRAP);
+ status->value.sig = TARGET_SIGNAL_TRAP;
break;
case EVENT_SUSPEND: /* Task was suspended, probably by ^C. */
- WSETSTOP (w, SIGINT);
+ status->value.sig = TARGET_SIGNAL_INT;
break;
case EVENT_BUS_ERR: /* Task made evil nasty reference. */
- WSETSTOP (w, SIGBUS);
+ status->value.sig = TARGET_SIGNAL_BUS;
break;
case EVENT_ZERO_DIV: /* Division by zero */
- WSETSTOP (w, SIGFPE); /* Like Unix, call it a float exception. */
+ status->value.sig = TARGET_SIGNAL_FPE;
break;
case EVENT_SIGNAL:
- /* The target is not running Unix, and its
- faults/traces do not map nicely into Unix signals.
- Make sure they do not get confused with Unix signals
- by numbering them with values higher than the highest
- legal Unix signal. code in the arch-dependent PRINT_RANDOM_SIGNAL
- routine will interpret the value for wait_for_inferior. */
- WSETSTOP (w, rdbEvent.sigType + NSIG);
+#ifdef I80960
+ status->value.sig = i960_fault_to_signal (rdbEvent.sigType);
+#else
+ /* Back in the old days, before enum target_signal, this code used
+ to add NSIG to the signal number and claim that PRINT_RANDOM_SIGNAL
+ would take care of it. But PRINT_RANDOM_SIGNAL has never been
+ defined except on the i960, so I don't really know what we are
+ supposed to do on other architectures. */
+ status->value.sig = TARGET_SIGNAL_UNKNOWN;
+#endif
break;
} /* switch */
- *status = *(int *)&w; /* Grumble union wait crap Grumble */
return pid;
}
\f
{
struct ldfile *pLoadFile = (struct ldfile *)arg;
- printf("\t%s: ", pLoadFile->name);
+ printf_unfiltered("\t%s: ", pLoadFile->name);
symbol_file_add (pLoadFile->name, 0, pLoadFile->txt_addr, 0, 0, 0);
- printf ("ok\n");
+ printf_unfiltered ("ok\n");
return 1;
}
/* Target command for VxWorks target systems.
target_preopen (from_tty);
unpush_target (&vx_ops);
- printf ("Attaching remote machine across net...\n");
- fflush (stdout);
+ printf_unfiltered ("Attaching remote machine across net...\n");
+ gdb_flush (gdb_stdout);
/* Allow the user to kill the connect attempt by typing ^C.
Wait until the call to target_has_fp () completes before
"Error while reading symbols from boot file:\n", RETURN_MASK_ALL))
puts_filtered ("ok\n");
} else if (from_tty)
- printf ("VxWorks kernel symbols not loaded.\n");
+ printf_unfiltered ("VxWorks kernel symbols not loaded.\n");
}
else
error ("Can't retrieve boot file name from target machine.");
error ("Invalid process-id -- give a single number in decimal or 0xhex");
if (from_tty)
- printf ("Attaching pid %s.\n", local_hex_string(pid));
+ printf_unfiltered ("Attaching pid %s.\n",
+ local_hex_string((unsigned long) pid));
- bzero ((char *)&ptrace_in, sizeof (ptrace_in));
- bzero ((char *)&ptrace_out, sizeof (ptrace_out));
+ memset ((char *)&ptrace_in, '\0', sizeof (ptrace_in));
+ memset ((char *)&ptrace_out, '\0', sizeof (ptrace_out));
ptrace_in.pid = pid;
status = net_ptrace_clnt_call (PTRACE_ATTACH, &ptrace_in, &ptrace_out);
error ("Argument given to VxWorks \"detach\".");
if (from_tty)
- printf ("Detaching pid %s.\n", local_hex_string(inferior_pid));
+ printf_unfiltered ("Detaching pid %s.\n",
+ local_hex_string((unsigned long) inferior_pid));
if (args) /* FIXME, should be possible to leave suspended */
signal = atoi (args);
- bzero ((char *)&ptrace_in, sizeof (ptrace_in));
- bzero ((char *)&ptrace_out, sizeof (ptrace_out));
+ memset ((char *)&ptrace_in, '\0', sizeof (ptrace_in));
+ memset ((char *)&ptrace_out, '\0', sizeof (ptrace_out));
ptrace_in.pid = inferior_pid;
status = net_ptrace_clnt_call (PTRACE_DETACH, &ptrace_in, &ptrace_out);
Ptrace_return ptrace_out;
int status;
- printf ("Killing pid %s.\n", local_hex_string(inferior_pid));
+ printf_unfiltered ("Killing pid %s.\n", local_hex_string((unsigned long) inferior_pid));
- bzero ((char *)&ptrace_in, sizeof (ptrace_in));
- bzero ((char *)&ptrace_out, sizeof (ptrace_out));
+ memset ((char *)&ptrace_in, '\0', sizeof (ptrace_in));
+ memset ((char *)&ptrace_out, '\0', sizeof (ptrace_out));
ptrace_in.pid = inferior_pid;
status = net_ptrace_clnt_call (PTRACE_KILL, &ptrace_in, &ptrace_out);
void
_initialize_vx ()
{
- add_target (&vx_ops);
+
+ add_show_from_set
+ (add_set_cmd ("vxworks-timeout", class_support, var_uinteger,
+ (char *) &rpcTimeout.tv_sec,
+ "Set seconds to wait for rpc calls to return.\n\
+Set the number of seconds to wait for rpc calls to return.", &setlist),
+ &showlist);
+
+ add_target (&vx_ops);
add_target (&vx_run_ops);
}
projects / deliverable / binutils-gdb.git / blobdiff