/* Memory-access and commands for remote VxWorks processes, for GDB.
- Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
+ Copyright (C) 1990-95, 1997-98, 1999 Free Software Foundation, Inc.
Contributed by Wind River Systems and Cygnus Support.
This file is part of GDB.
static int net_step ();
static int net_ptrace_clnt_call (); /* Forward decl */
static enum clnt_stat net_clnt_call (); /* Forward decl */
-extern struct target_ops vx_ops, vx_run_ops; /* Forward declaration */
+
+/* Target ops structure for accessing memory and such over the net */
+
+static struct target_ops vx_ops;
+
+/* Target ops structure for accessing VxWorks child processes over the net */
+
+static struct target_ops vx_run_ops;
/* Saved name of target host and called function for "info files".
Both malloc'd. */
error (rpcerr);
if (ptrace_out.status == -1)
{
- errno = ptrace_out.errno;
+ errno = ptrace_out.errno_num;
sprintf (message, "reading %s registers", (procnum == PTRACE_GETREGS)
? "general-purpose"
: "floating-point");
error (rpcerr);
if (ptrace_out.status == -1)
{
- errno = ptrace_out.errno;
+ errno = ptrace_out.errno_num;
sprintf (message, "writing %s registers", (procnum == PTRACE_SETREGS)
? "general-purpose"
: "floating-point");
code chosen by the target so that a later perror () will
say something meaningful. */
- errno = ptrace_out.errno;
+ errno = ptrace_out.errno_num;
}
}
error (rpcerr);
if (ptrace_out.status == -1)
{
- errno = ptrace_out.errno;
+ errno = ptrace_out.errno_num;
perror_with_name ("Resuming remote process");
}
}
/* It might be nice to suppress the breakpoint_re_set which happens here
because we are going to do one again after the objfile_relocate. */
- objfile = symbol_file_add (name, from_tty, 0, 0, 0, 0);
+ objfile = symbol_file_add (name, from_tty, 0, 0, 0, 0, 0, 0);
/* This is a (slightly cheesy) way of superceding the old symbols. A less
cheesy way would be to find the objfile with the same name and
error (rpcerr);
if (ptrace_out.status == -1)
{
- errno = ptrace_out.errno;
+ errno = ptrace_out.errno_num;
perror_with_name ("Attaching remote process");
}
error (rpcerr);
if (ptrace_out.status == -1)
{
- errno = ptrace_out.errno;
+ errno = ptrace_out.errno_num;
perror_with_name ("Detaching VxWorks process");
}
warning (rpcerr);
else if (ptrace_out.status == -1)
{
- errno = ptrace_out.errno;
+ errno = ptrace_out.errno_num;
perror_with_name ("Killing VxWorks process");
}
error ("Use the \"run\" command to start a VxWorks process.");
}
-/* Target ops structure for accessing memory and such over the net */
-
-struct target_ops vx_ops ;
-
-static void init_vx_ops(void)
+static void
+init_vx_ops ()
{
- vx_ops.to_shortname = "vxworks";
- vx_ops.to_longname = "VxWorks target memory via RPC over TCP/IP";
- vx_ops.to_doc = "Use VxWorks target memory. \n\
-Specify the name of the machine to connect to.",
- vx_ops.to_open = vx_open;
- vx_ops.to_close = vx_close;
- vx_ops.to_attach = vx_attach;
- vx_ops.to_detach = 0; /* vx_detach, */
- vx_ops.to_resume = 0;
- vx_ops.to_wait = 0; /* resume, wait */
- vx_ops.to_fetch_registers = 0;
- vx_ops.to_store_registers = 0; /* read_reg, write_reg */
- vx_ops.to_prepare_to_store = 0; /* prep_to_store, */
- vx_ops.to_xfer_memory = vx_xfer_memory;
- vx_ops.to_files_info = vx_files_info;
- vx_ops.to_insert_breakpoint = 0;
- vx_ops.to_remove_breakpoint = 0; /* insert_breakpoint, remove_breakpoint */
- vx_ops.to_terminal_init = 0;
- vx_ops.to_terminal_inferior = 0;
- vx_ops.to_terminal_ours_for_output = 0;
- vx_ops.to_terminal_ours = 0;
- vx_ops.to_terminal_info = 0; /* terminal stuff */
- vx_ops.to_kill = 0; /* vx_kill, */
- vx_ops.to_load = vx_load_command;
- vx_ops.to_lookup_symbol = vx_lookup_symbol;
- vx_ops.to_create_inferior = vx_create_inferior;
- vx_ops.to_mourn_inferior = 0; /* mourn_inferior */
- vx_ops.to_can_run = 0; /* can_run */
- vx_ops.to_notice_signals = 0; /* notice_signals */
- vx_ops.to_thread_alive = 0; /* thread_alive */
- vx_ops.to_stop = 0; /* to_stop */
- vx_ops.to_stratum = core_stratum;
- vx_ops.DONT_USE = 0; /* next */
- vx_ops.to_has_all_memory = 1;
- vx_ops.to_has_memory = 1;
- vx_ops.to_has_stack = 0;
- vx_ops.to_has_registers = 0;
- vx_ops.to_has_execution = 0; /* all mem, mem, stack, regs, exec */
- vx_ops.to_sections = 0;
- vx_ops.to_sections_end = 0;
- vx_ops.to_magic = OPS_MAGIC; /* Always the last thing */
+ vx_ops.to_shortname = "vxworks";
+ vx_ops.to_longname = "VxWorks target memory via RPC over TCP/IP";
+ vx_ops.to_doc = "Use VxWorks target memory. \n\
+Specify the name of the machine to connect to.";
+ vx_ops.to_open = vx_open;
+ vx_ops.to_close = vx_close;
+ vx_ops.to_attach = vx_attach;
+ vx_ops.to_xfer_memory = vx_xfer_memory;
+ vx_ops.to_files_info = vx_files_info;
+ vx_ops.to_load = vx_load_command;
+ vx_ops.to_lookup_symbol = vx_lookup_symbol;
+ vx_ops.to_create_inferior = vx_create_inferior;
+ vx_ops.to_stratum = core_stratum;
+ vx_ops.to_has_all_memory = 1;
+ vx_ops.to_has_memory = 1;
+ vx_ops.to_magic = OPS_MAGIC; /* Always the last thing */
};
-/* Target ops structure for accessing VxWorks child processes over the net */
-
-struct target_ops vx_run_ops ;
-
-static void init_vx_run_ops(void)
+static void
+init_vx_run_ops ()
{
- vx_run_ops.to_shortname = "vxprocess";
- vx_run_ops.to_longname = "VxWorks process";
- vx_run_ops.to_doc = "VxWorks process; started by the \"run\" command.",
- vx_run_ops.to_open = vx_proc_open;
- vx_run_ops.to_close = vx_proc_close;
- vx_run_ops.to_attach = 0;
- vx_run_ops.to_detach = vx_detach;
- vx_run_ops.to_resume = vx_resume;
- vx_run_ops.to_wait = vx_wait;
- vx_run_ops.to_fetch_registers = vx_read_register;
- vx_run_ops.to_store_registers = vx_write_register;
- vx_run_ops.to_prepare_to_store = vx_prepare_to_store;
- vx_run_ops.to_xfer_memory = vx_xfer_memory;
- vx_run_ops.to_files_info = vx_run_files_info;
- vx_run_ops.to_insert_breakpoint = vx_insert_breakpoint;
- vx_run_ops.to_remove_breakpoint = vx_remove_breakpoint;
- vx_run_ops.to_terminal_init = 0;
- vx_run_ops.to_terminal_inferior = 0;
- vx_run_ops.to_terminal_ours_for_output = 0;
- vx_run_ops.to_terminal_ours = 0;
- vx_run_ops.to_terminal_info = 0;
- vx_run_ops.to_kill = vx_kill;
- vx_run_ops.to_load = vx_load_command;
- vx_run_ops.to_lookup_symbol = vx_lookup_symbol;
- vx_run_ops.to_create_inferior = 0;
- vx_run_ops.to_mourn_inferior = vx_mourn_inferior ;
- vx_run_ops.to_can_run = 0;
- vx_run_ops.to_notice_signals = 0;
- vx_run_ops.to_thread_alive = 0;
- vx_run_ops.to_stop = 0;
- vx_run_ops.to_stratum = process_stratum;
- vx_run_ops.DONT_USE = 0;
- vx_run_ops.to_has_all_memory = 0;
- vx_run_ops.to_has_memory = 1;
- vx_run_ops.to_has_stack = 1;
- vx_run_ops.to_has_registers = 1;
- vx_run_ops.to_has_execution = 1;
- vx_run_ops.to_sections = 0;
- vx_run_ops.to_sections_end = 0;
- vx_run_ops.to_magic = OPS_MAGIC;
+ vx_run_ops.to_shortname = "vxprocess";
+ vx_run_ops.to_longname = "VxWorks process";
+ vx_run_ops.to_doc = "VxWorks process; started by the \"run\" command.";
+ vx_run_ops.to_open = vx_proc_open;
+ vx_run_ops.to_close = vx_proc_close;
+ vx_run_ops.to_detach = vx_detach;
+ vx_run_ops.to_resume = vx_resume;
+ vx_run_ops.to_wait = vx_wait;
+ vx_run_ops.to_fetch_registers = vx_read_register;
+ vx_run_ops.to_store_registers = vx_write_register;
+ vx_run_ops.to_prepare_to_store = vx_prepare_to_store;
+ vx_run_ops.to_xfer_memory = vx_xfer_memory;
+ vx_run_ops.to_files_info = vx_run_files_info;
+ vx_run_ops.to_insert_breakpoint = vx_insert_breakpoint;
+ vx_run_ops.to_remove_breakpoint = vx_remove_breakpoint;
+ vx_run_ops.to_kill = vx_kill;
+ vx_run_ops.to_load = vx_load_command;
+ vx_run_ops.to_lookup_symbol = vx_lookup_symbol;
+ vx_run_ops.to_mourn_inferior = vx_mourn_inferior ;
+ vx_run_ops.to_stratum = process_stratum;
+ vx_run_ops.to_has_memory = 1;
+ vx_run_ops.to_has_stack = 1;
+ vx_run_ops.to_has_registers = 1;
+ vx_run_ops.to_has_execution = 1;
+ vx_run_ops.to_magic = OPS_MAGIC;
}
-/* ==> Remember when reading at end of file, there are two "ops" structs here. */
\f
void
_initialize_vx ()
{
- init_vx_ops() ;
- init_vx_run_ops() ;
+ init_vx_ops ();
+ add_target (&vx_ops);
+ init_vx_run_ops ();
+ add_target (&vx_run_ops);
+
add_show_from_set
(add_set_cmd ("vxworks-timeout", class_support, var_uinteger,
(char *) &rpcTimeout.tv_sec,
"Set seconds to wait for rpc calls to return.\n\
Set the number of seconds to wait for rpc calls to return.", &setlist),
&showlist);
-
- add_target (&vx_ops);
- add_target (&vx_run_ops);
}