/* Remote target communications for serial-line targets in custom GDB protocol
- Copyright (C) 1988-2018 Free Software Foundation, Inc.
+ Copyright (C) 1988-2019 Free Software Foundation, Inc.
This file is part of GDB.
#include "bfd.h"
#include "symfile.h"
#include "target.h"
-/*#include "terminal.h" */
+#include "process-stratum-target.h"
#include "gdbcmd.h"
#include "objfiles.h"
#include "gdb-stabs.h"
#include "cli/cli-setshow.h"
#include "target-descriptions.h"
#include "gdb_bfd.h"
-#include "filestuff.h"
-#include "rsp-low.h"
+#include "gdbsupport/filestuff.h"
+#include "gdbsupport/rsp-low.h"
#include "disasm.h"
#include "location.h"
-#include "gdb_sys_time.h"
+#include "gdbsupport/gdb_sys_time.h"
#include "event-loop.h"
#include "event-top.h"
#include "tracepoint.h"
#include "ax.h"
#include "ax-gdb.h"
-#include "agent.h"
+#include "gdbsupport/agent.h"
#include "btrace.h"
#include "record-btrace.h"
#include <algorithm>
-#include "common/scoped_restore.h"
-#include "environ.h"
-#include "common/byte-vector.h"
+#include "gdbsupport/scoped_restore.h"
+#include "gdbsupport/environ.h"
+#include "gdbsupport/byte-vector.h"
+#include <algorithm>
+#include <unordered_map>
/* The remote target. */
Specify the serial device it is connected to\n\
(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.).");
+#define OPAQUETHREADBYTES 8
+
+/* a 64 bit opaque identifier */
+typedef unsigned char threadref[OPAQUETHREADBYTES];
+
+struct gdb_ext_thread_info;
+struct threads_listing_context;
+typedef int (*rmt_thread_action) (threadref *ref, void *context);
+struct protocol_feature;
+struct packet_reg;
+
+struct stop_reply;
+typedef std::unique_ptr<stop_reply> stop_reply_up;
+
+/* Generic configuration support for packets the stub optionally
+ supports. Allows the user to specify the use of the packet as well
+ as allowing GDB to auto-detect support in the remote stub. */
+
+enum packet_support
+ {
+ PACKET_SUPPORT_UNKNOWN = 0,
+ PACKET_ENABLE,
+ PACKET_DISABLE
+ };
+
+/* Analyze a packet's return value and update the packet config
+ accordingly. */
+
+enum packet_result
+{
+ PACKET_ERROR,
+ PACKET_OK,
+ PACKET_UNKNOWN
+};
+
+struct threads_listing_context;
+
+/* Stub vCont actions support.
+
+ Each field is a boolean flag indicating whether the stub reports
+ support for the corresponding action. */
+
+struct vCont_action_support
+{
+ /* vCont;t */
+ bool t = false;
+
+ /* vCont;r */
+ bool r = false;
+
+ /* vCont;s */
+ bool s = false;
+
+ /* vCont;S */
+ bool S = false;
+};
+
+/* About this many threadids fit in a packet. */
+
+#define MAXTHREADLISTRESULTS 32
+
+/* Data for the vFile:pread readahead cache. */
+
+struct readahead_cache
+{
+ /* Invalidate the readahead cache. */
+ void invalidate ();
+
+ /* Invalidate the readahead cache if it is holding data for FD. */
+ void invalidate_fd (int fd);
+
+ /* Serve pread from the readahead cache. Returns number of bytes
+ read, or 0 if the request can't be served from the cache. */
+ int pread (int fd, gdb_byte *read_buf, size_t len, ULONGEST offset);
+
+ /* The file descriptor for the file that is being cached. -1 if the
+ cache is invalid. */
+ int fd = -1;
+
+ /* The offset into the file that the cache buffer corresponds
+ to. */
+ ULONGEST offset = 0;
+
+ /* The buffer holding the cache contents. */
+ gdb_byte *buf = nullptr;
+ /* The buffer's size. We try to read as much as fits into a packet
+ at a time. */
+ size_t bufsize = 0;
+
+ /* Cache hit and miss counters. */
+ ULONGEST hit_count = 0;
+ ULONGEST miss_count = 0;
+};
+
+/* Description of the remote protocol for a given architecture. */
+
+struct packet_reg
+{
+ long offset; /* Offset into G packet. */
+ long regnum; /* GDB's internal register number. */
+ LONGEST pnum; /* Remote protocol register number. */
+ int in_g_packet; /* Always part of G packet. */
+ /* long size in bytes; == register_size (target_gdbarch (), regnum);
+ at present. */
+ /* char *name; == gdbarch_register_name (target_gdbarch (), regnum);
+ at present. */
+};
+
+struct remote_arch_state
+{
+ explicit remote_arch_state (struct gdbarch *gdbarch);
+
+ /* Description of the remote protocol registers. */
+ long sizeof_g_packet;
+
+ /* Description of the remote protocol registers indexed by REGNUM
+ (making an array gdbarch_num_regs in size). */
+ std::unique_ptr<packet_reg[]> regs;
+
+ /* This is the size (in chars) of the first response to the ``g''
+ packet. It is used as a heuristic when determining the maximum
+ size of memory-read and memory-write packets. A target will
+ typically only reserve a buffer large enough to hold the ``g''
+ packet. The size does not include packet overhead (headers and
+ trailers). */
+ long actual_register_packet_size;
+
+ /* This is the maximum size (in chars) of a non read/write packet.
+ It is also used as a cap on the size of read/write packets. */
+ long remote_packet_size;
+};
+
+/* Description of the remote protocol state for the currently
+ connected target. This is per-target state, and independent of the
+ selected architecture. */
+
+class remote_state
+{
+public:
+
+ remote_state ();
+ ~remote_state ();
+
+ /* Get the remote arch state for GDBARCH. */
+ struct remote_arch_state *get_remote_arch_state (struct gdbarch *gdbarch);
+
+public: /* data */
+
+ /* A buffer to use for incoming packets, and its current size. The
+ buffer is grown dynamically for larger incoming packets.
+ Outgoing packets may also be constructed in this buffer.
+ The size of the buffer is always at least REMOTE_PACKET_SIZE;
+ REMOTE_PACKET_SIZE should be used to limit the length of outgoing
+ packets. */
+ gdb::char_vector buf;
+
+ /* True if we're going through initial connection setup (finding out
+ about the remote side's threads, relocating symbols, etc.). */
+ bool starting_up = false;
+
+ /* If we negotiated packet size explicitly (and thus can bypass
+ heuristics for the largest packet size that will not overflow
+ a buffer in the stub), this will be set to that packet size.
+ Otherwise zero, meaning to use the guessed size. */
+ long explicit_packet_size = 0;
+
+ /* remote_wait is normally called when the target is running and
+ waits for a stop reply packet. But sometimes we need to call it
+ when the target is already stopped. We can send a "?" packet
+ and have remote_wait read the response. Or, if we already have
+ the response, we can stash it in BUF and tell remote_wait to
+ skip calling getpkt. This flag is set when BUF contains a
+ stop reply packet and the target is not waiting. */
+ int cached_wait_status = 0;
+
+ /* True, if in no ack mode. That is, neither GDB nor the stub will
+ expect acks from each other. The connection is assumed to be
+ reliable. */
+ bool noack_mode = false;
+
+ /* True if we're connected in extended remote mode. */
+ bool extended = false;
+
+ /* True if we resumed the target and we're waiting for the target to
+ stop. In the mean time, we can't start another command/query.
+ The remote server wouldn't be ready to process it, so we'd
+ timeout waiting for a reply that would never come and eventually
+ we'd close the connection. This can happen in asynchronous mode
+ because we allow GDB commands while the target is running. */
+ bool waiting_for_stop_reply = false;
+
+ /* The status of the stub support for the various vCont actions. */
+ vCont_action_support supports_vCont;
+
+ /* True if the user has pressed Ctrl-C, but the target hasn't
+ responded to that. */
+ bool ctrlc_pending_p = false;
+
+ /* True if we saw a Ctrl-C while reading or writing from/to the
+ remote descriptor. At that point it is not safe to send a remote
+ interrupt packet, so we instead remember we saw the Ctrl-C and
+ process it once we're done with sending/receiving the current
+ packet, which should be shortly. If however that takes too long,
+ and the user presses Ctrl-C again, we offer to disconnect. */
+ bool got_ctrlc_during_io = false;
+
+ /* Descriptor for I/O to remote machine. Initialize it to NULL so that
+ remote_open knows that we don't have a file open when the program
+ starts. */
+ struct serial *remote_desc = nullptr;
+
+ /* These are the threads which we last sent to the remote system. The
+ TID member will be -1 for all or -2 for not sent yet. */
+ ptid_t general_thread = null_ptid;
+ ptid_t continue_thread = null_ptid;
+
+ /* This is the traceframe which we last selected on the remote system.
+ It will be -1 if no traceframe is selected. */
+ int remote_traceframe_number = -1;
+
+ char *last_pass_packet = nullptr;
+
+ /* The last QProgramSignals packet sent to the target. We bypass
+ sending a new program signals list down to the target if the new
+ packet is exactly the same as the last we sent. IOW, we only let
+ the target know about program signals list changes. */
+ char *last_program_signals_packet = nullptr;
+
+ gdb_signal last_sent_signal = GDB_SIGNAL_0;
+
+ bool last_sent_step = false;
+
+ /* The execution direction of the last resume we got. */
+ exec_direction_kind last_resume_exec_dir = EXEC_FORWARD;
+
+ char *finished_object = nullptr;
+ char *finished_annex = nullptr;
+ ULONGEST finished_offset = 0;
+
+ /* Should we try the 'ThreadInfo' query packet?
+
+ This variable (NOT available to the user: auto-detect only!)
+ determines whether GDB will use the new, simpler "ThreadInfo"
+ query or the older, more complex syntax for thread queries.
+ This is an auto-detect variable (set to true at each connect,
+ and set to false when the target fails to recognize it). */
+ bool use_threadinfo_query = false;
+ bool use_threadextra_query = false;
+
+ threadref echo_nextthread {};
+ threadref nextthread {};
+ threadref resultthreadlist[MAXTHREADLISTRESULTS] {};
+
+ /* The state of remote notification. */
+ struct remote_notif_state *notif_state = nullptr;
+
+ /* The branch trace configuration. */
+ struct btrace_config btrace_config {};
+
+ /* The argument to the last "vFile:setfs:" packet we sent, used
+ to avoid sending repeated unnecessary "vFile:setfs:" packets.
+ Initialized to -1 to indicate that no "vFile:setfs:" packet
+ has yet been sent. */
+ int fs_pid = -1;
+
+ /* A readahead cache for vFile:pread. Often, reading a binary
+ involves a sequence of small reads. E.g., when parsing an ELF
+ file. A readahead cache helps mostly the case of remote
+ debugging on a connection with higher latency, due to the
+ request/reply nature of the RSP. We only cache data for a single
+ file descriptor at a time. */
+ struct readahead_cache readahead_cache;
+
+ /* The list of already fetched and acknowledged stop events. This
+ queue is used for notification Stop, and other notifications
+ don't need queue for their events, because the notification
+ events of Stop can't be consumed immediately, so that events
+ should be queued first, and be consumed by remote_wait_{ns,as}
+ one per time. Other notifications can consume their events
+ immediately, so queue is not needed for them. */
+ std::vector<stop_reply_up> stop_reply_queue;
+
+ /* Asynchronous signal handle registered as event loop source for
+ when we have pending events ready to be passed to the core. */
+ struct async_event_handler *remote_async_inferior_event_token = nullptr;
+
+ /* FIXME: cagney/1999-09-23: Even though getpkt was called with
+ ``forever'' still use the normal timeout mechanism. This is
+ currently used by the ASYNC code to guarentee that target reads
+ during the initial connect always time-out. Once getpkt has been
+ modified to return a timeout indication and, in turn
+ remote_wait()/wait_for_inferior() have gained a timeout parameter
+ this can go away. */
+ int wait_forever_enabled_p = 1;
+
+private:
+ /* Mapping of remote protocol data for each gdbarch. Usually there
+ is only one entry here, though we may see more with stubs that
+ support multi-process. */
+ std::unordered_map<struct gdbarch *, remote_arch_state>
+ m_arch_states;
+};
+
static const target_info remote_target_info = {
"remote",
N_("Remote serial target in gdb-specific protocol"),
remote_doc
};
-class remote_target : public target_ops
+class remote_target : public process_stratum_target
{
public:
- remote_target ()
- {
- to_stratum = process_stratum;
- }
+ remote_target () = default;
+ ~remote_target () override;
const target_info &info () const override
{ return remote_target_info; }
void mourn_inferior () override;
- void pass_signals (int, unsigned char *) override;
+ void pass_signals (gdb::array_view<const unsigned char>) override;
int set_syscall_catchpoint (int, bool, int,
gdb::array_view<const int>) override;
- void program_signals (int, unsigned char *) override;
+ void program_signals (gdb::array_view<const unsigned char>) override;
bool thread_alive (ptid_t ptid) override;
void update_thread_list () override;
- const char *pid_to_str (ptid_t) override;
+ std::string pid_to_str (ptid_t) override;
const char *extra_thread_info (struct thread_info *) override;
int handle_len,
inferior *inf) override;
+ gdb::byte_vector thread_info_to_thread_handle (struct thread_info *tp)
+ override;
+
void stop (ptid_t) override;
void interrupt () override;
CORE_ADDR load_module_addr,
CORE_ADDR offset) override;
- bool has_all_memory () override { return default_child_has_all_memory (); }
- bool has_memory () override { return default_child_has_memory (); }
- bool has_stack () override { return default_child_has_stack (); }
- bool has_registers () override { return default_child_has_registers (); }
- bool has_execution (ptid_t ptid) override { return default_child_has_execution (ptid); }
-
bool can_execute_reverse () override;
std::vector<mem_region> memory_map () override;
const struct btrace_config *btrace_conf (const struct btrace_target_info *) override;
bool augmented_libraries_svr4_read () override;
int follow_fork (int, int) override;
- void follow_exec (struct inferior *, char *) override;
+ void follow_exec (struct inferior *, const char *) override;
int insert_fork_catchpoint (int) override;
int remove_fork_catchpoint (int) override;
int insert_vfork_catchpoint (int) override;
int remove_exec_catchpoint (int) override;
enum exec_direction_kind execution_direction () override;
-protected:
+public: /* Remote specific methods. */
+
+ void remote_download_command_source (int num, ULONGEST addr,
+ struct command_line *cmds);
+
+ void remote_file_put (const char *local_file, const char *remote_file,
+ int from_tty);
+ void remote_file_get (const char *remote_file, const char *local_file,
+ int from_tty);
+ void remote_file_delete (const char *remote_file, int from_tty);
+
+ int remote_hostio_pread (int fd, gdb_byte *read_buf, int len,
+ ULONGEST offset, int *remote_errno);
+ int remote_hostio_pwrite (int fd, const gdb_byte *write_buf, int len,
+ ULONGEST offset, int *remote_errno);
+ int remote_hostio_pread_vFile (int fd, gdb_byte *read_buf, int len,
+ ULONGEST offset, int *remote_errno);
+
+ int remote_hostio_send_command (int command_bytes, int which_packet,
+ int *remote_errno, char **attachment,
+ int *attachment_len);
+ int remote_hostio_set_filesystem (struct inferior *inf,
+ int *remote_errno);
+ /* We should get rid of this and use fileio_open directly. */
+ int remote_hostio_open (struct inferior *inf, const char *filename,
+ int flags, int mode, int warn_if_slow,
+ int *remote_errno);
+ int remote_hostio_close (int fd, int *remote_errno);
+
+ int remote_hostio_unlink (inferior *inf, const char *filename,
+ int *remote_errno);
+
+ struct remote_state *get_remote_state ();
+
+ long get_remote_packet_size (void);
+ long get_memory_packet_size (struct memory_packet_config *config);
+
+ long get_memory_write_packet_size ();
+ long get_memory_read_packet_size ();
+
+ char *append_pending_thread_resumptions (char *p, char *endp,
+ ptid_t ptid);
static void open_1 (const char *name, int from_tty, int extended_p);
void start_remote (int from_tty, int extended_p);
+ void remote_detach_1 (struct inferior *inf, int from_tty);
+
+ char *append_resumption (char *p, char *endp,
+ ptid_t ptid, int step, gdb_signal siggnal);
+ int remote_resume_with_vcont (ptid_t ptid, int step,
+ gdb_signal siggnal);
+
+ void add_current_inferior_and_thread (char *wait_status);
+
+ ptid_t wait_ns (ptid_t ptid, struct target_waitstatus *status,
+ int options);
+ ptid_t wait_as (ptid_t ptid, target_waitstatus *status,
+ int options);
+
+ ptid_t process_stop_reply (struct stop_reply *stop_reply,
+ target_waitstatus *status);
+
+ void remote_notice_new_inferior (ptid_t currthread, int executing);
+
+ void process_initial_stop_replies (int from_tty);
+
+ thread_info *remote_add_thread (ptid_t ptid, bool running, bool executing);
+
+ void btrace_sync_conf (const btrace_config *conf);
+
+ void remote_btrace_maybe_reopen ();
+
+ void remove_new_fork_children (threads_listing_context *context);
+ void kill_new_fork_children (int pid);
+ void discard_pending_stop_replies (struct inferior *inf);
+ int stop_reply_queue_length ();
+
+ void check_pending_events_prevent_wildcard_vcont
+ (int *may_global_wildcard_vcont);
+
+ void discard_pending_stop_replies_in_queue ();
+ struct stop_reply *remote_notif_remove_queued_reply (ptid_t ptid);
+ struct stop_reply *queued_stop_reply (ptid_t ptid);
+ int peek_stop_reply (ptid_t ptid);
+ void remote_parse_stop_reply (const char *buf, stop_reply *event);
+
+ void remote_stop_ns (ptid_t ptid);
+ void remote_interrupt_as ();
+ void remote_interrupt_ns ();
+
+ char *remote_get_noisy_reply ();
+ int remote_query_attached (int pid);
+ inferior *remote_add_inferior (bool fake_pid_p, int pid, int attached,
+ int try_open_exec);
+
+ ptid_t remote_current_thread (ptid_t oldpid);
+ ptid_t get_current_thread (char *wait_status);
+
+ void set_thread (ptid_t ptid, int gen);
+ void set_general_thread (ptid_t ptid);
+ void set_continue_thread (ptid_t ptid);
+ void set_general_process ();
+
+ char *write_ptid (char *buf, const char *endbuf, ptid_t ptid);
+
+ int remote_unpack_thread_info_response (char *pkt, threadref *expectedref,
+ gdb_ext_thread_info *info);
+ int remote_get_threadinfo (threadref *threadid, int fieldset,
+ gdb_ext_thread_info *info);
+
+ int parse_threadlist_response (char *pkt, int result_limit,
+ threadref *original_echo,
+ threadref *resultlist,
+ int *doneflag);
+ int remote_get_threadlist (int startflag, threadref *nextthread,
+ int result_limit, int *done, int *result_count,
+ threadref *threadlist);
+
+ int remote_threadlist_iterator (rmt_thread_action stepfunction,
+ void *context, int looplimit);
+
+ int remote_get_threads_with_ql (threads_listing_context *context);
+ int remote_get_threads_with_qxfer (threads_listing_context *context);
+ int remote_get_threads_with_qthreadinfo (threads_listing_context *context);
+
+ void extended_remote_restart ();
+
+ void get_offsets ();
+
+ void remote_check_symbols ();
+
+ void remote_supported_packet (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *argument);
+
+ void remote_query_supported ();
+
+ void remote_packet_size (const protocol_feature *feature,
+ packet_support support, const char *value);
+
+ void remote_serial_quit_handler ();
+
+ void remote_detach_pid (int pid);
+
+ void remote_vcont_probe ();
+
+ void remote_resume_with_hc (ptid_t ptid, int step,
+ gdb_signal siggnal);
+
+ void send_interrupt_sequence ();
+ void interrupt_query ();
+
+ void remote_notif_get_pending_events (notif_client *nc);
+
+ int fetch_register_using_p (struct regcache *regcache,
+ packet_reg *reg);
+ int send_g_packet ();
+ void process_g_packet (struct regcache *regcache);
+ void fetch_registers_using_g (struct regcache *regcache);
+ int store_register_using_P (const struct regcache *regcache,
+ packet_reg *reg);
+ void store_registers_using_G (const struct regcache *regcache);
+
+ void set_remote_traceframe ();
+
+ void check_binary_download (CORE_ADDR addr);
+
+ target_xfer_status remote_write_bytes_aux (const char *header,
+ CORE_ADDR memaddr,
+ const gdb_byte *myaddr,
+ ULONGEST len_units,
+ int unit_size,
+ ULONGEST *xfered_len_units,
+ char packet_format,
+ int use_length);
+
+ target_xfer_status remote_write_bytes (CORE_ADDR memaddr,
+ const gdb_byte *myaddr, ULONGEST len,
+ int unit_size, ULONGEST *xfered_len);
+
+ target_xfer_status remote_read_bytes_1 (CORE_ADDR memaddr, gdb_byte *myaddr,
+ ULONGEST len_units,
+ int unit_size, ULONGEST *xfered_len_units);
+
+ target_xfer_status remote_xfer_live_readonly_partial (gdb_byte *readbuf,
+ ULONGEST memaddr,
+ ULONGEST len,
+ int unit_size,
+ ULONGEST *xfered_len);
+
+ target_xfer_status remote_read_bytes (CORE_ADDR memaddr,
+ gdb_byte *myaddr, ULONGEST len,
+ int unit_size,
+ ULONGEST *xfered_len);
+
+ packet_result remote_send_printf (const char *format, ...)
+ ATTRIBUTE_PRINTF (2, 3);
+
+ target_xfer_status remote_flash_write (ULONGEST address,
+ ULONGEST length, ULONGEST *xfered_len,
+ const gdb_byte *data);
+
+ int readchar (int timeout);
+
+ void remote_serial_write (const char *str, int len);
+
+ int putpkt (const char *buf);
+ int putpkt_binary (const char *buf, int cnt);
+
+ int putpkt (const gdb::char_vector &buf)
+ {
+ return putpkt (buf.data ());
+ }
+
+ void skip_frame ();
+ long read_frame (gdb::char_vector *buf_p);
+ void getpkt (gdb::char_vector *buf, int forever);
+ int getpkt_or_notif_sane_1 (gdb::char_vector *buf, int forever,
+ int expecting_notif, int *is_notif);
+ int getpkt_sane (gdb::char_vector *buf, int forever);
+ int getpkt_or_notif_sane (gdb::char_vector *buf, int forever,
+ int *is_notif);
+ int remote_vkill (int pid);
+ void remote_kill_k ();
+
+ void extended_remote_disable_randomization (int val);
+ int extended_remote_run (const std::string &args);
+
+ void send_environment_packet (const char *action,
+ const char *packet,
+ const char *value);
+
+ void extended_remote_environment_support ();
+ void extended_remote_set_inferior_cwd ();
+
+ target_xfer_status remote_write_qxfer (const char *object_name,
+ const char *annex,
+ const gdb_byte *writebuf,
+ ULONGEST offset, LONGEST len,
+ ULONGEST *xfered_len,
+ struct packet_config *packet);
+
+ target_xfer_status remote_read_qxfer (const char *object_name,
+ const char *annex,
+ gdb_byte *readbuf, ULONGEST offset,
+ LONGEST len,
+ ULONGEST *xfered_len,
+ struct packet_config *packet);
+
+ void push_stop_reply (struct stop_reply *new_event);
+
+ bool vcont_r_supported ();
+
+ void packet_command (const char *args, int from_tty);
+
+private: /* data fields */
+
+ /* The remote state. Don't reference this directly. Use the
+ get_remote_state method instead. */
+ remote_state m_remote_state;
};
static const target_info extended_remote_target_info = {
};
/* Per-program-space data key. */
-static const struct program_space_data *remote_pspace_data;
+static const struct program_space_key<char, gdb::xfree_deleter<char>>
+ remote_pspace_data;
/* The variable registered as the control variable used by the
remote exec-file commands. While the remote exec-file setting is
enum { REMOTE_ALIGN_WRITES = 16 };
/* Prototypes for local functions. */
-static int getpkt_sane (char **buf, long *sizeof_buf, int forever);
-static int getpkt_or_notif_sane (char **buf, long *sizeof_buf,
- int forever, int *is_notif);
-
-struct remote_state;
-
-static int remote_vkill (int pid, struct remote_state *rs);
-
-static void remote_kill_k (void);
-
-static int readchar (int timeout);
-
-static void remote_serial_write (const char *str, int len);
-
-static void interrupt_query (void);
-
-static void set_general_thread (ptid_t ptid);
-static void set_continue_thread (ptid_t ptid);
-
-static void get_offsets (void);
-
-static void skip_frame (void);
-
-static long read_frame (char **buf_p, long *sizeof_buf);
static int hexnumlen (ULONGEST num);
static int stub_unpack_int (char *buff, int fieldlength);
-static ptid_t remote_current_thread (ptid_t oldptid);
-
-static int putpkt_binary (const char *buf, int cnt);
-
-static void check_binary_download (CORE_ADDR addr);
-
struct packet_config;
static void show_packet_config_cmd (struct packet_config *config);
struct cmd_list_element *c,
const char *value);
-static char *write_ptid (char *buf, const char *endbuf, ptid_t ptid);
static ptid_t read_ptid (const char *buf, const char **obuf);
-static void remote_query_supported (void);
-
-static void remote_check_symbols (void);
-
-struct stop_reply;
-static void stop_reply_xfree (struct stop_reply *);
-static void remote_parse_stop_reply (char *, struct stop_reply *);
-static void push_stop_reply (struct stop_reply *);
-static void discard_pending_stop_replies_in_queue (struct remote_state *);
-static int peek_stop_reply (ptid_t ptid);
-
-struct threads_listing_context;
-static void remove_new_fork_children (struct threads_listing_context *);
-
static void remote_async_inferior_event_handler (gdb_client_data);
-static int remote_read_description_p (struct target_ops *target);
-
-static void remote_console_output (char *msg);
+static bool remote_read_description_p (struct target_ops *target);
-static void remote_btrace_reset (void);
+static void remote_console_output (const char *msg);
-static void remote_btrace_maybe_reopen (void);
-
-static int stop_reply_queue_length (void);
-
-static void readahead_cache_invalidate (void);
+static void remote_btrace_reset (remote_state *rs);
static void remote_unpush_and_throw (void);
-static struct remote_state *get_remote_state (void);
-
/* For "remote". */
static struct cmd_list_element *remote_cmdlist;
static struct cmd_list_element *remote_set_cmdlist;
static struct cmd_list_element *remote_show_cmdlist;
-/* Stub vCont actions support.
-
- Each field is a boolean flag indicating whether the stub reports
- support for the corresponding action. */
-
-struct vCont_action_support
-{
- /* vCont;t */
- int t;
-
- /* vCont;r */
- int r;
-
- /* vCont;s */
- int s;
-
- /* vCont;S */
- int S;
-};
-
-/* Controls whether GDB is willing to use range stepping. */
-
-static int use_range_stepping = 1;
-
-#define OPAQUETHREADBYTES 8
-
-/* a 64 bit opaque identifier */
-typedef unsigned char threadref[OPAQUETHREADBYTES];
-
-/* About this many threadisds fit in a packet. */
-
-#define MAXTHREADLISTRESULTS 32
-
-/* The max number of chars in debug output. The rest of chars are
- omitted. */
-
-#define REMOTE_DEBUG_MAX_CHAR 512
-
-/* Data for the vFile:pread readahead cache. */
-
-struct readahead_cache
-{
- /* The file descriptor for the file that is being cached. -1 if the
- cache is invalid. */
- int fd;
-
- /* The offset into the file that the cache buffer corresponds
- to. */
- ULONGEST offset;
-
- /* The buffer holding the cache contents. */
- gdb_byte *buf;
- /* The buffer's size. We try to read as much as fits into a packet
- at a time. */
- size_t bufsize;
-
- /* Cache hit and miss counters. */
- ULONGEST hit_count;
- ULONGEST miss_count;
-};
-
-/* Description of the remote protocol state for the currently
- connected target. This is per-target state, and independent of the
- selected architecture. */
-
-struct remote_state
-{
- /* A buffer to use for incoming packets, and its current size. The
- buffer is grown dynamically for larger incoming packets.
- Outgoing packets may also be constructed in this buffer.
- BUF_SIZE is always at least REMOTE_PACKET_SIZE;
- REMOTE_PACKET_SIZE should be used to limit the length of outgoing
- packets. */
- char *buf;
- long buf_size;
-
- /* True if we're going through initial connection setup (finding out
- about the remote side's threads, relocating symbols, etc.). */
- int starting_up;
-
- /* If we negotiated packet size explicitly (and thus can bypass
- heuristics for the largest packet size that will not overflow
- a buffer in the stub), this will be set to that packet size.
- Otherwise zero, meaning to use the guessed size. */
- long explicit_packet_size;
-
- /* remote_wait is normally called when the target is running and
- waits for a stop reply packet. But sometimes we need to call it
- when the target is already stopped. We can send a "?" packet
- and have remote_wait read the response. Or, if we already have
- the response, we can stash it in BUF and tell remote_wait to
- skip calling getpkt. This flag is set when BUF contains a
- stop reply packet and the target is not waiting. */
- int cached_wait_status;
-
- /* True, if in no ack mode. That is, neither GDB nor the stub will
- expect acks from each other. The connection is assumed to be
- reliable. */
- int noack_mode;
-
- /* True if we're connected in extended remote mode. */
- int extended;
-
- /* True if we resumed the target and we're waiting for the target to
- stop. In the mean time, we can't start another command/query.
- The remote server wouldn't be ready to process it, so we'd
- timeout waiting for a reply that would never come and eventually
- we'd close the connection. This can happen in asynchronous mode
- because we allow GDB commands while the target is running. */
- int waiting_for_stop_reply;
-
- /* The status of the stub support for the various vCont actions. */
- struct vCont_action_support supports_vCont;
-
- /* Nonzero if the user has pressed Ctrl-C, but the target hasn't
- responded to that. */
- int ctrlc_pending_p;
-
- /* True if we saw a Ctrl-C while reading or writing from/to the
- remote descriptor. At that point it is not safe to send a remote
- interrupt packet, so we instead remember we saw the Ctrl-C and
- process it once we're done with sending/receiving the current
- packet, which should be shortly. If however that takes too long,
- and the user presses Ctrl-C again, we offer to disconnect. */
- int got_ctrlc_during_io;
-
- /* Descriptor for I/O to remote machine. Initialize it to NULL so that
- remote_open knows that we don't have a file open when the program
- starts. */
- struct serial *remote_desc;
-
- /* These are the threads which we last sent to the remote system. The
- TID member will be -1 for all or -2 for not sent yet. */
- ptid_t general_thread;
- ptid_t continue_thread;
-
- /* This is the traceframe which we last selected on the remote system.
- It will be -1 if no traceframe is selected. */
- int remote_traceframe_number;
-
- char *last_pass_packet;
-
- /* The last QProgramSignals packet sent to the target. We bypass
- sending a new program signals list down to the target if the new
- packet is exactly the same as the last we sent. IOW, we only let
- the target know about program signals list changes. */
- char *last_program_signals_packet;
-
- enum gdb_signal last_sent_signal;
-
- int last_sent_step;
-
- /* The execution direction of the last resume we got. */
- enum exec_direction_kind last_resume_exec_dir;
-
- char *finished_object;
- char *finished_annex;
- ULONGEST finished_offset;
-
- /* Should we try the 'ThreadInfo' query packet?
-
- This variable (NOT available to the user: auto-detect only!)
- determines whether GDB will use the new, simpler "ThreadInfo"
- query or the older, more complex syntax for thread queries.
- This is an auto-detect variable (set to true at each connect,
- and set to false when the target fails to recognize it). */
- int use_threadinfo_query;
- int use_threadextra_query;
-
- threadref echo_nextthread;
- threadref nextthread;
- threadref resultthreadlist[MAXTHREADLISTRESULTS];
-
- /* The state of remote notification. */
- struct remote_notif_state *notif_state;
+/* Controls whether GDB is willing to use range stepping. */
- /* The branch trace configuration. */
- struct btrace_config btrace_config;
+static bool use_range_stepping = true;
- /* The argument to the last "vFile:setfs:" packet we sent, used
- to avoid sending repeated unnecessary "vFile:setfs:" packets.
- Initialized to -1 to indicate that no "vFile:setfs:" packet
- has yet been sent. */
- int fs_pid;
+/* The max number of chars in debug output. The rest of chars are
+ omitted. */
- /* A readahead cache for vFile:pread. Often, reading a binary
- involves a sequence of small reads. E.g., when parsing an ELF
- file. A readahead cache helps mostly the case of remote
- debugging on a connection with higher latency, due to the
- request/reply nature of the RSP. We only cache data for a single
- file descriptor at a time. */
- struct readahead_cache readahead_cache;
-};
+#define REMOTE_DEBUG_MAX_CHAR 512
/* Private data that we'll store in (struct thread_info)->priv. */
struct remote_thread_info : public private_thread_info
int vcont_resumed = 0;
};
-/* This data could be associated with a target, but we do not always
- have access to the current target when we need it, so for now it is
- static. This will be fine for as long as only one target is in use
- at a time. */
-static struct remote_state *remote_state;
-
-static struct remote_state *
-get_remote_state_raw (void)
+remote_state::remote_state ()
+ : buf (400)
{
- return remote_state;
}
-/* Allocate a new struct remote_state with xmalloc, initialize it, and
- return it. */
-
-static struct remote_state *
-new_remote_state (void)
+remote_state::~remote_state ()
{
- struct remote_state *result = XCNEW (struct remote_state);
-
- /* The default buffer size is unimportant; it will be expanded
- whenever a larger buffer is needed. */
- result->buf_size = 400;
- result->buf = (char *) xmalloc (result->buf_size);
- result->remote_traceframe_number = -1;
- result->last_sent_signal = GDB_SIGNAL_0;
- result->last_resume_exec_dir = EXEC_FORWARD;
- result->fs_pid = -1;
-
- return result;
+ xfree (this->last_pass_packet);
+ xfree (this->last_program_signals_packet);
+ xfree (this->finished_object);
+ xfree (this->finished_annex);
}
-/* Description of the remote protocol for a given architecture. */
-
-struct packet_reg
-{
- long offset; /* Offset into G packet. */
- long regnum; /* GDB's internal register number. */
- LONGEST pnum; /* Remote protocol register number. */
- int in_g_packet; /* Always part of G packet. */
- /* long size in bytes; == register_size (target_gdbarch (), regnum);
- at present. */
- /* char *name; == gdbarch_register_name (target_gdbarch (), regnum);
- at present. */
-};
-
-struct remote_arch_state
-{
- /* Description of the remote protocol registers. */
- long sizeof_g_packet;
-
- /* Description of the remote protocol registers indexed by REGNUM
- (making an array gdbarch_num_regs in size). */
- struct packet_reg *regs;
-
- /* This is the size (in chars) of the first response to the ``g''
- packet. It is used as a heuristic when determining the maximum
- size of memory-read and memory-write packets. A target will
- typically only reserve a buffer large enough to hold the ``g''
- packet. The size does not include packet overhead (headers and
- trailers). */
- long actual_register_packet_size;
-
- /* This is the maximum size (in chars) of a non read/write packet.
- It is also used as a cap on the size of read/write packets. */
- long remote_packet_size;
-};
-
/* Utility: generate error from an incoming stub packet. */
static void
trace_error (char *buf)
/* Utility: wait for reply from stub, while accepting "O" packets. */
-static char *
-remote_get_noisy_reply ()
+char *
+remote_target::remote_get_noisy_reply ()
{
struct remote_state *rs = get_remote_state ();
char *buf;
QUIT; /* Allow user to bail out with ^C. */
- getpkt (&rs->buf, &rs->buf_size, 0);
- buf = rs->buf;
+ getpkt (&rs->buf, 0);
+ buf = rs->buf.data ();
if (buf[0] == 'E')
trace_error (buf);
else if (startswith (buf, "qRelocInsn:"))
org_to = to;
- TRY
+ try
{
gdbarch_relocate_instruction (target_gdbarch (), &to, from);
relocated = 1;
}
- CATCH (ex, RETURN_MASK_ALL)
+ catch (const gdb_exception &ex)
{
if (ex.error == MEMORY_ERROR)
{
}
putpkt ("E01");
}
- END_CATCH
if (relocated)
{
adjusted_size = to - org_to;
- xsnprintf (buf, rs->buf_size, "qRelocInsn:%x", adjusted_size);
+ xsnprintf (buf, rs->buf.size (), "qRelocInsn:%x", adjusted_size);
putpkt (buf);
}
}
while (1);
}
-/* Handle for retreving the remote protocol data from gdbarch. */
-static struct gdbarch_data *remote_gdbarch_data_handle;
-
-static struct remote_arch_state *
-get_remote_arch_state (struct gdbarch *gdbarch)
+struct remote_arch_state *
+remote_state::get_remote_arch_state (struct gdbarch *gdbarch)
{
- gdb_assert (gdbarch != NULL);
- return ((struct remote_arch_state *)
- gdbarch_data (gdbarch, remote_gdbarch_data_handle));
+ remote_arch_state *rsa;
+
+ auto it = this->m_arch_states.find (gdbarch);
+ if (it == this->m_arch_states.end ())
+ {
+ auto p = this->m_arch_states.emplace (std::piecewise_construct,
+ std::forward_as_tuple (gdbarch),
+ std::forward_as_tuple (gdbarch));
+ rsa = &p.first->second;
+
+ /* Make sure that the packet buffer is plenty big enough for
+ this architecture. */
+ if (this->buf.size () < rsa->remote_packet_size)
+ this->buf.resize (2 * rsa->remote_packet_size);
+ }
+ else
+ rsa = &it->second;
+
+ return rsa;
}
/* Fetch the global remote target state. */
-static struct remote_state *
-get_remote_state (void)
+remote_state *
+remote_target::get_remote_state ()
{
/* Make sure that the remote architecture state has been
initialized, because doing so might reallocate rs->buf. Any
function which calls getpkt also needs to be mindful of changes
to rs->buf, but this call limits the number of places which run
into trouble. */
- get_remote_arch_state (target_gdbarch ());
-
- return get_remote_state_raw ();
-}
-
-/* Cleanup routine for the remote module's pspace data. */
-
-static void
-remote_pspace_data_cleanup (struct program_space *pspace, void *arg)
-{
- char *remote_exec_file = (char *) arg;
+ m_remote_state.get_remote_arch_state (target_gdbarch ());
- xfree (remote_exec_file);
+ return &m_remote_state;
}
/* Fetch the remote exec-file from the current program space. */
{
char *remote_exec_file;
- remote_exec_file
- = (char *) program_space_data (current_program_space,
- remote_pspace_data);
+ remote_exec_file = remote_pspace_data.get (current_program_space);
if (remote_exec_file == NULL)
return "";
static void
set_pspace_remote_exec_file (struct program_space *pspace,
- char *remote_exec_file)
+ const char *remote_exec_file)
{
- char *old_file = (char *) program_space_data (pspace, remote_pspace_data);
+ char *old_file = remote_pspace_data.get (pspace);
xfree (old_file);
- set_program_space_data (pspace, remote_pspace_data,
- xstrdup (remote_exec_file));
+ remote_pspace_data.set (pspace, xstrdup (remote_exec_file));
}
/* The "set/show remote exec-file" set command hook. */
fprintf_filtered (file, "%s\n", remote_exec_file_var);
}
-static int
-compare_pnums (const void *lhs_, const void *rhs_)
-{
- const struct packet_reg * const *lhs
- = (const struct packet_reg * const *) lhs_;
- const struct packet_reg * const *rhs
- = (const struct packet_reg * const *) rhs_;
-
- if ((*lhs)->pnum < (*rhs)->pnum)
- return -1;
- else if ((*lhs)->pnum == (*rhs)->pnum)
- return 0;
- else
- return 1;
-}
-
static int
map_regcache_remote_table (struct gdbarch *gdbarch, struct packet_reg *regs)
{
if (regs[regnum].pnum != -1)
remote_regs[num_remote_regs++] = ®s[regnum];
- qsort (remote_regs, num_remote_regs, sizeof (struct packet_reg *),
- compare_pnums);
+ std::sort (remote_regs, remote_regs + num_remote_regs,
+ [] (const packet_reg *a, const packet_reg *b)
+ { return a->pnum < b->pnum; });
for (regnum = 0, offset = 0; regnum < num_remote_regs; regnum++)
{
return *pnum != -1;
}
-static void *
-init_remote_state (struct gdbarch *gdbarch)
+remote_arch_state::remote_arch_state (struct gdbarch *gdbarch)
{
- struct remote_state *rs = get_remote_state_raw ();
- struct remote_arch_state *rsa;
-
- rsa = GDBARCH_OBSTACK_ZALLOC (gdbarch, struct remote_arch_state);
-
/* Use the architecture to build a regnum<->pnum table, which will be
1:1 unless a feature set specifies otherwise. */
- rsa->regs = GDBARCH_OBSTACK_CALLOC (gdbarch,
- gdbarch_num_regs (gdbarch),
- struct packet_reg);
+ this->regs.reset (new packet_reg [gdbarch_num_regs (gdbarch)] ());
/* Record the maximum possible size of the g packet - it may turn out
to be smaller. */
- rsa->sizeof_g_packet = map_regcache_remote_table (gdbarch, rsa->regs);
+ this->sizeof_g_packet
+ = map_regcache_remote_table (gdbarch, this->regs.get ());
/* Default maximum number of characters in a packet body. Many
remote stubs have a hardwired buffer size of 400 bytes
NUL character can always fit in the buffer. This stops GDB
trashing stubs that try to squeeze an extra NUL into what is
already a full buffer (As of 1999-12-04 that was most stubs). */
- rsa->remote_packet_size = 400 - 1;
+ this->remote_packet_size = 400 - 1;
/* This one is filled in when a ``g'' packet is received. */
- rsa->actual_register_packet_size = 0;
+ this->actual_register_packet_size = 0;
/* Should rsa->sizeof_g_packet needs more space than the
default, adjust the size accordingly. Remember that each byte is
header / footer. NOTE: cagney/1999-10-26: I suspect that 8
(``$NN:G...#NN'') is a better guess, the below has been padded a
little. */
- if (rsa->sizeof_g_packet > ((rsa->remote_packet_size - 32) / 2))
- rsa->remote_packet_size = (rsa->sizeof_g_packet * 2 + 32);
+ if (this->sizeof_g_packet > ((this->remote_packet_size - 32) / 2))
+ this->remote_packet_size = (this->sizeof_g_packet * 2 + 32);
+}
- /* Make sure that the packet buffer is plenty big enough for
- this architecture. */
- if (rs->buf_size < rsa->remote_packet_size)
- {
- rs->buf_size = 2 * rsa->remote_packet_size;
- rs->buf = (char *) xrealloc (rs->buf, rs->buf_size);
- }
+/* Get a pointer to the current remote target. If not connected to a
+ remote target, return NULL. */
- return rsa;
+static remote_target *
+get_current_remote_target ()
+{
+ target_ops *proc_target = find_target_at (process_stratum);
+ return dynamic_cast<remote_target *> (proc_target);
}
/* Return the current allowed size of a remote packet. This is
inferred from the current architecture, and should be used to
limit the length of outgoing packets. */
-static long
-get_remote_packet_size (void)
+long
+remote_target::get_remote_packet_size ()
{
struct remote_state *rs = get_remote_state ();
- remote_arch_state *rsa = get_remote_arch_state (target_gdbarch ());
+ remote_arch_state *rsa = rs->get_remote_arch_state (target_gdbarch ());
if (rs->explicit_packet_size)
return rs->explicit_packet_size;
return NULL;
}
-static remote_target remote_ops;
-
-static extended_remote_target extended_remote_ops;
-
-/* FIXME: cagney/1999-09-23: Even though getpkt was called with
- ``forever'' still use the normal timeout mechanism. This is
- currently used by the ASYNC code to guarentee that target reads
- during the initial connect always time-out. Once getpkt has been
- modified to return a timeout indication and, in turn
- remote_wait()/wait_for_inferior() have gained a timeout parameter
- this can go away. */
-static int wait_forever_enabled_p = 1;
-
/* Allow the user to specify what sequence to send to the remote
when he requests a program interruption: Although ^C is usually
what remote systems expect (this is the default, here), it is
to the remote target when gdb connects to it.
This is mostly needed when you debug the Linux kernel: The Linux kernel
expects BREAK g which is Magic SysRq g for connecting gdb. */
-static int interrupt_on_connect = 0;
+static bool interrupt_on_connect = false;
/* This variable is used to implement the "set/show remotebreak" commands.
Since these commands are now deprecated in favor of "set/show remote
interrupt-sequence", it no longer has any effect on the code. */
-static int remote_break;
+static bool remote_break;
static void
set_remotebreak (const char *args, int from_tty, struct cmd_list_element *c)
memory packets to ``host::sizeof long'' bytes - (typically 32
bits). Consequently, for 64 bit targets, the upper 32 bits of an
address was never sent. Since fixing this bug may cause a break in
- some remote targets this variable is principly provided to
+ some remote targets this variable is principally provided to
facilitate backward compatibility. */
static unsigned int remote_address_size;
int fixed_p;
};
-/* The default max memory-write-packet-size. The 16k is historical.
- (It came from older GDB's using alloca for buffers and the
- knowledge (folklore?) that some hosts don't cope very well with
- large alloca calls.) */
-#define DEFAULT_MAX_MEMORY_PACKET_SIZE 16384
+/* The default max memory-write-packet-size, when the setting is
+ "fixed". The 16k is historical. (It came from older GDB's using
+ alloca for buffers and the knowledge (folklore?) that some hosts
+ don't cope very well with large alloca calls.) */
+#define DEFAULT_MAX_MEMORY_PACKET_SIZE_FIXED 16384
/* The minimum remote packet size for memory transfers. Ensures we
can write at least one byte. */
#define MIN_MEMORY_PACKET_SIZE 20
+/* Get the memory packet size, assuming it is fixed. */
+
+static long
+get_fixed_memory_packet_size (struct memory_packet_config *config)
+{
+ gdb_assert (config->fixed_p);
+
+ if (config->size <= 0)
+ return DEFAULT_MAX_MEMORY_PACKET_SIZE_FIXED;
+ else
+ return config->size;
+}
+
/* Compute the current size of a read/write packet. Since this makes
use of ``actual_register_packet_size'' the computation is dynamic. */
-static long
-get_memory_packet_size (struct memory_packet_config *config)
+long
+remote_target::get_memory_packet_size (struct memory_packet_config *config)
{
struct remote_state *rs = get_remote_state ();
- remote_arch_state *rsa = get_remote_arch_state (target_gdbarch ());
+ remote_arch_state *rsa = rs->get_remote_arch_state (target_gdbarch ());
long what_they_get;
if (config->fixed_p)
- {
- if (config->size <= 0)
- what_they_get = DEFAULT_MAX_MEMORY_PACKET_SIZE;
- else
- what_they_get = config->size;
- }
+ what_they_get = get_fixed_memory_packet_size (config);
else
{
what_they_get = get_remote_packet_size ();
/* Make sure there is room in the global buffer for this packet
(including its trailing NUL byte). */
- if (rs->buf_size < what_they_get + 1)
- {
- rs->buf_size = 2 * what_they_get;
- rs->buf = (char *) xrealloc (rs->buf, 2 * what_they_get);
- }
+ if (rs->buf.size () < what_they_get + 1)
+ rs->buf.resize (2 * what_they_get);
return what_they_get;
}
something arbitrarily large. */
}
- /* So that the query shows the correct value. */
- if (size <= 0)
- size = DEFAULT_MAX_MEMORY_PACKET_SIZE;
-
/* Extra checks? */
if (fixed_p && !config->fixed_p)
{
+ /* So that the query shows the correct value. */
+ long query_size = (size <= 0
+ ? DEFAULT_MAX_MEMORY_PACKET_SIZE_FIXED
+ : size);
+
if (! query (_("The target may not be able to correctly handle a %s\n"
"of %ld bytes. Change the packet size? "),
- config->name, size))
+ config->name, query_size))
error (_("Packet size not changed."));
}
/* Update the config. */
static void
show_memory_packet_size (struct memory_packet_config *config)
{
- printf_filtered (_("The %s is %ld. "), config->name, config->size);
+ if (config->size == 0)
+ printf_filtered (_("The %s is 0 (default). "), config->name);
+ else
+ printf_filtered (_("The %s is %ld. "), config->name, config->size);
if (config->fixed_p)
printf_filtered (_("Packets are fixed at %ld bytes.\n"),
- get_memory_packet_size (config));
+ get_fixed_memory_packet_size (config));
else
- printf_filtered (_("Packets are limited to %ld bytes.\n"),
- get_memory_packet_size (config));
+ {
+ remote_target *remote = get_current_remote_target ();
+
+ if (remote != NULL)
+ printf_filtered (_("Packets are limited to %ld bytes.\n"),
+ remote->get_memory_packet_size (config));
+ else
+ puts_filtered ("The actual limit will be further reduced "
+ "dependent on the target.\n");
+ }
}
static struct memory_packet_config memory_write_packet_config =
show_memory_packet_size (&memory_write_packet_config);
}
-static long
-get_memory_write_packet_size (void)
+/* Show the number of hardware watchpoints that can be used. */
+
+static void
+show_hardware_watchpoint_limit (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+ fprintf_filtered (file, _("The maximum number of target hardware "
+ "watchpoints is %s.\n"), value);
+}
+
+/* Show the length limit (in bytes) for hardware watchpoints. */
+
+static void
+show_hardware_watchpoint_length_limit (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+ fprintf_filtered (file, _("The maximum length (in bytes) of a target "
+ "hardware watchpoint is %s.\n"), value);
+}
+
+/* Show the number of hardware breakpoints that can be used. */
+
+static void
+show_hardware_breakpoint_limit (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+ fprintf_filtered (file, _("The maximum number of target hardware "
+ "breakpoints is %s.\n"), value);
+}
+
+long
+remote_target::get_memory_write_packet_size ()
{
return get_memory_packet_size (&memory_write_packet_config);
}
show_memory_packet_size (&memory_read_packet_config);
}
-static long
-get_memory_read_packet_size (void)
+long
+remote_target::get_memory_read_packet_size ()
{
long size = get_memory_packet_size (&memory_read_packet_config);
}
\f
-/* Generic configuration support for packets the stub optionally
- supports. Allows the user to specify the use of the packet as well
- as allowing GDB to auto-detect support in the remote stub. */
-
-enum packet_support
- {
- PACKET_SUPPORT_UNKNOWN = 0,
- PACKET_ENABLE,
- PACKET_DISABLE
- };
struct packet_config
{
enum packet_support support;
};
-/* Analyze a packet's return value and update the packet config
- accordingly. */
-
-enum packet_result
-{
- PACKET_ERROR,
- PACKET_OK,
- PACKET_UNKNOWN
-};
-
static enum packet_support packet_config_support (struct packet_config *config);
static enum packet_support packet_support (int packet);
config->name = name;
config->title = title;
- set_doc = xstrprintf ("Set use of remote protocol `%s' (%s) packet",
+ set_doc = xstrprintf ("Set use of remote protocol `%s' (%s) packet.",
name, title);
show_doc = xstrprintf ("Show current use of remote "
- "protocol `%s' (%s) packet",
+ "protocol `%s' (%s) packet.",
name, title);
/* set/show TITLE-packet {auto,on,off} */
cmd_name = xstrprintf ("%s-packet", title);
if (buf[0] == 'E'
&& isxdigit (buf[1]) && isxdigit (buf[2])
&& buf[3] == '\0')
- /* "Enn" - definitly an error. */
+ /* "Enn" - definitely an error. */
return PACKET_ERROR;
/* Always treat "E." as an error. This will be used for
return PACKET_UNKNOWN;
}
+static enum packet_result
+packet_check_result (const gdb::char_vector &buf)
+{
+ return packet_check_result (buf.data ());
+}
+
static enum packet_result
packet_ok (const char *buf, struct packet_config *config)
{
return result;
}
+static enum packet_result
+packet_ok (const gdb::char_vector &buf, struct packet_config *config)
+{
+ return packet_ok (buf.data (), config);
+}
+
enum {
PACKET_vCont = 0,
PACKET_X,
PACKET_qXfer_libraries,
PACKET_qXfer_libraries_svr4,
PACKET_qXfer_memory_map,
- PACKET_qXfer_spu_read,
- PACKET_qXfer_spu_write,
PACKET_qXfer_osdata,
PACKET_qXfer_threads,
PACKET_qXfer_statictrace_read,
}
\f
-/* Asynchronous signal handle registered as event loop source for
- when we have pending events ready to be passed to the core. */
-static struct async_event_handler *remote_async_inferior_event_token;
-
-\f
-
-static ptid_t magic_null_ptid;
-static ptid_t not_sent_ptid;
-static ptid_t any_thread_ptid;
+/* Take advantage of the fact that the TID field is not used, to tag
+ special ptids with it set to != 0. */
+static const ptid_t magic_null_ptid (42000, -1, 1);
+static const ptid_t not_sent_ptid (42000, -2, 1);
+static const ptid_t any_thread_ptid (42000, 0, 1);
/* Find out if the stub attached to PID (and hence GDB should offer to
detach instead of killing it when bailing out). */
-static int
-remote_query_attached (int pid)
+int
+remote_target::remote_query_attached (int pid)
{
struct remote_state *rs = get_remote_state ();
size_t size = get_remote_packet_size ();
return 0;
if (remote_multi_process_p (rs))
- xsnprintf (rs->buf, size, "qAttached:%x", pid);
+ xsnprintf (rs->buf.data (), size, "qAttached:%x", pid);
else
- xsnprintf (rs->buf, size, "qAttached");
+ xsnprintf (rs->buf.data (), size, "qAttached");
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf,
&remote_protocol_packets[PACKET_qAttached]))
{
case PACKET_OK:
- if (strcmp (rs->buf, "1") == 0)
+ if (strcmp (rs->buf.data (), "1") == 0)
return 1;
break;
case PACKET_ERROR:
- warning (_("Remote failure reply: %s"), rs->buf);
+ warning (_("Remote failure reply: %s"), rs->buf.data ());
break;
case PACKET_UNKNOWN:
break;
attempt to open this inferior's executable as the main executable
if no main executable is open already. */
-static struct inferior *
-remote_add_inferior (int fake_pid_p, int pid, int attached,
- int try_open_exec)
+inferior *
+remote_target::remote_add_inferior (bool fake_pid_p, int pid, int attached,
+ int try_open_exec)
{
struct inferior *inf;
}
static remote_thread_info *get_remote_thread_info (thread_info *thread);
+static remote_thread_info *get_remote_thread_info (ptid_t ptid);
/* Add thread PTID to GDB's thread list. Tag it as executing/running
according to RUNNING. */
-static void
-remote_add_thread (ptid_t ptid, int running, int executing)
+thread_info *
+remote_target::remote_add_thread (ptid_t ptid, bool running, bool executing)
{
struct remote_state *rs = get_remote_state ();
struct thread_info *thread;
get_remote_thread_info (thread)->vcont_resumed = executing;
set_executing (ptid, executing);
set_running (ptid, running);
+
+ return thread;
}
/* Come here when we learn about a thread id from the remote target.
GDB's inferior list as well. EXECUTING indicates whether the
thread is (internally) executing or stopped. */
-static void
-remote_notice_new_inferior (ptid_t currthread, int executing)
+void
+remote_target::remote_notice_new_inferior (ptid_t currthread, int executing)
{
/* In non-stop mode, we assume new found threads are (externally)
running until proven otherwise with a stop reply. In all-stop,
/* If this is a new thread, add it to GDB's thread list.
If we leave it up to WFI to do this, bad things will happen. */
- if (in_thread_list (currthread) && is_exited (currthread))
+ thread_info *tp = find_thread_ptid (currthread);
+ if (tp != NULL && tp->state == THREAD_EXITED)
{
/* We're seeing an event on a thread id we knew had exited.
This has to be a new thread reusing the old id. Add it. */
if (!in_thread_list (currthread))
{
struct inferior *inf = NULL;
- int pid = ptid_get_pid (currthread);
+ int pid = currthread.pid ();
- if (ptid_is_pid (inferior_ptid)
- && pid == ptid_get_pid (inferior_ptid))
+ if (inferior_ptid.is_pid ()
+ && pid == inferior_ptid.pid ())
{
/* inferior_ptid has no thread member yet. This can happen
with the vAttach -> remote_wait,"TAAthread:" path if the
stub doesn't support qC. This is the first stop reported
after an attach, so this is the main thread. Update the
ptid in the thread list. */
- if (in_thread_list (pid_to_ptid (pid)))
+ if (in_thread_list (ptid_t (pid)))
thread_change_ptid (inferior_ptid, currthread);
else
{
return;
}
- if (ptid_equal (magic_null_ptid, inferior_ptid))
+ if (magic_null_ptid == inferior_ptid)
{
/* inferior_ptid is not set yet. This can happen with the
vRun -> remote_wait,"TAAthread:" path if the stub
extended-remote which already was debugging an inferior, we
may not know about it yet. Add it before adding its child
thread, so notifications are emitted in a sensible order. */
- if (!in_inferior_list (ptid_get_pid (currthread)))
+ if (find_inferior_pid (currthread.pid ()) == NULL)
{
struct remote_state *rs = get_remote_state ();
- int fake_pid_p = !remote_multi_process_p (rs);
+ bool fake_pid_p = !remote_multi_process_p (rs);
inf = remote_add_inferior (fake_pid_p,
- ptid_get_pid (currthread), -1, 1);
+ currthread.pid (), -1, 1);
}
/* This is really a new thread. Add it. */
- remote_add_thread (currthread, running, executing);
+ thread_info *new_thr
+ = remote_add_thread (currthread, running, executing);
/* If we found a new inferior, let the common code do whatever
it needs to with it (e.g., read shared libraries, insert
struct remote_state *rs = get_remote_state ();
if (!rs->starting_up)
- notice_new_inferior (currthread, executing, 0);
+ notice_new_inferior (new_thr, executing, 0);
}
}
}
return static_cast<remote_thread_info *> (thread->priv.get ());
}
-/* Return PTID's private thread data, creating it if necessary. */
-
static remote_thread_info *
get_remote_thread_info (ptid_t ptid)
{
- struct thread_info *info = find_thread_ptid (ptid);
-
- return get_remote_thread_info (info);
+ thread_info *thr = find_thread_ptid (ptid);
+ return get_remote_thread_info (thr);
}
/* Call this function as a result of
it can simply pass through to the inferior without reporting. */
void
-remote_target::pass_signals (int numsigs, unsigned char *pass_signals)
+remote_target::pass_signals (gdb::array_view<const unsigned char> pass_signals)
{
if (packet_support (PACKET_QPassSignals) != PACKET_DISABLE)
{
char *pass_packet, *p;
- int count = 0, i;
+ int count = 0;
struct remote_state *rs = get_remote_state ();
- gdb_assert (numsigs < 256);
- for (i = 0; i < numsigs; i++)
+ gdb_assert (pass_signals.size () < 256);
+ for (size_t i = 0; i < pass_signals.size (); i++)
{
if (pass_signals[i])
count++;
pass_packet = (char *) xmalloc (count * 3 + strlen ("QPassSignals:") + 1);
strcpy (pass_packet, "QPassSignals:");
p = pass_packet + strlen (pass_packet);
- for (i = 0; i < numsigs; i++)
+ for (size_t i = 0; i < pass_signals.size (); i++)
{
if (pass_signals[i])
{
if (!rs->last_pass_packet || strcmp (rs->last_pass_packet, pass_packet))
{
putpkt (pass_packet);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
packet_ok (rs->buf, &remote_protocol_packets[PACKET_QPassSignals]);
if (rs->last_pass_packet)
xfree (rs->last_pass_packet);
struct remote_state *rs = get_remote_state ();
putpkt (catch_packet);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
result = packet_ok (rs->buf, &remote_protocol_packets[PACKET_QCatchSyscalls]);
if (result == PACKET_OK)
return 0;
signals it should pass through to the inferior when detaching. */
void
-remote_target::program_signals (int numsigs, unsigned char *signals)
+remote_target::program_signals (gdb::array_view<const unsigned char> signals)
{
if (packet_support (PACKET_QProgramSignals) != PACKET_DISABLE)
{
char *packet, *p;
- int count = 0, i;
+ int count = 0;
struct remote_state *rs = get_remote_state ();
- gdb_assert (numsigs < 256);
- for (i = 0; i < numsigs; i++)
+ gdb_assert (signals.size () < 256);
+ for (size_t i = 0; i < signals.size (); i++)
{
if (signals[i])
count++;
packet = (char *) xmalloc (count * 3 + strlen ("QProgramSignals:") + 1);
strcpy (packet, "QProgramSignals:");
p = packet + strlen (packet);
- for (i = 0; i < numsigs; i++)
+ for (size_t i = 0; i < signals.size (); i++)
{
if (signal_pass_state (i))
{
|| strcmp (rs->last_program_signals_packet, packet) != 0)
{
putpkt (packet);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
packet_ok (rs->buf, &remote_protocol_packets[PACKET_QProgramSignals]);
xfree (rs->last_program_signals_packet);
rs->last_program_signals_packet = packet;
MINUS_ONE_PTID, set the thread to -1, so the stub returns the
thread. If GEN is set, set the general thread, if not, then set
the step/continue thread. */
-static void
-set_thread (ptid_t ptid, int gen)
+void
+remote_target::set_thread (ptid_t ptid, int gen)
{
struct remote_state *rs = get_remote_state ();
ptid_t state = gen ? rs->general_thread : rs->continue_thread;
- char *buf = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *buf = rs->buf.data ();
+ char *endbuf = buf + get_remote_packet_size ();
- if (ptid_equal (state, ptid))
+ if (state == ptid)
return;
*buf++ = 'H';
*buf++ = gen ? 'g' : 'c';
- if (ptid_equal (ptid, magic_null_ptid))
+ if (ptid == magic_null_ptid)
xsnprintf (buf, endbuf - buf, "0");
- else if (ptid_equal (ptid, any_thread_ptid))
+ else if (ptid == any_thread_ptid)
xsnprintf (buf, endbuf - buf, "0");
- else if (ptid_equal (ptid, minus_one_ptid))
+ else if (ptid == minus_one_ptid)
xsnprintf (buf, endbuf - buf, "-1");
else
write_ptid (buf, endbuf, ptid);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (gen)
rs->general_thread = ptid;
else
rs->continue_thread = ptid;
}
-static void
-set_general_thread (ptid_t ptid)
+void
+remote_target::set_general_thread (ptid_t ptid)
{
set_thread (ptid, 1);
}
-static void
-set_continue_thread (ptid_t ptid)
+void
+remote_target::set_continue_thread (ptid_t ptid)
{
set_thread (ptid, 0);
}
general operations is the process the selected general thread
belongs to. */
-static void
-set_general_process (void)
+void
+remote_target::set_general_process ()
{
struct remote_state *rs = get_remote_state ();
/* We only need to change the remote current thread if it's pointing
at some other process. */
- if (ptid_get_pid (rs->general_thread) != ptid_get_pid (inferior_ptid))
+ if (rs->general_thread.pid () != inferior_ptid.pid ())
set_general_thread (inferior_ptid);
}
static int
remote_thread_always_alive (ptid_t ptid)
{
- if (ptid_equal (ptid, magic_null_ptid))
+ if (ptid == magic_null_ptid)
/* The main thread is always alive. */
return 1;
- if (ptid_get_pid (ptid) != 0 && ptid_get_lwp (ptid) == 0)
+ if (ptid.pid () != 0 && ptid.lwp () == 0)
/* The main thread is always alive. This can happen after a
vAttach, if the remote side doesn't support
multi-threading. */
if (remote_thread_always_alive (ptid))
return 1;
- p = rs->buf;
- endp = rs->buf + get_remote_packet_size ();
+ p = rs->buf.data ();
+ endp = p + get_remote_packet_size ();
*p++ = 'T';
write_ptid (p, endp, ptid);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
return (rs->buf[0] == 'O' && rs->buf[1] == 'K');
}
/* About these extended threadlist and threadinfo packets. They are
variable length packets but, the fields within them are often fixed
- length. They are redundent enough to send over UDP as is the
+ length. They are redundant enough to send over UDP as is the
remote protocol in general. There is a matching unit test module
in libstub. */
static char *pack_threadinfo_request (char *pkt, int mode,
threadref *id);
-static int remote_unpack_thread_info_response (char *pkt,
- threadref *expectedref,
- struct gdb_ext_thread_info
- *info);
-
-
-static int remote_get_threadinfo (threadref *threadid,
- int fieldset, /*TAG mask */
- struct gdb_ext_thread_info *info);
-
static char *pack_threadlist_request (char *pkt, int startflag,
int threadcount,
threadref *nextthread);
-static int parse_threadlist_response (char *pkt,
- int result_limit,
- threadref *original_echo,
- threadref *resultlist,
- int *doneflag);
-
-static int remote_get_threadlist (int startflag,
- threadref *nextthread,
- int result_limit,
- int *done,
- int *result_count,
- threadref *threadlist);
-
-typedef int (*rmt_thread_action) (threadref *ref, void *context);
-
-static int remote_threadlist_iterator (rmt_thread_action stepfunction,
- void *context, int looplimit);
-
static int remote_newthread_step (threadref *ref, void *context);
buffer we're allowed to write to. Returns
BUF+CHARACTERS_WRITTEN. */
-static char *
-write_ptid (char *buf, const char *endbuf, ptid_t ptid)
+char *
+remote_target::write_ptid (char *buf, const char *endbuf, ptid_t ptid)
{
int pid, tid;
struct remote_state *rs = get_remote_state ();
if (remote_multi_process_p (rs))
{
- pid = ptid_get_pid (ptid);
+ pid = ptid.pid ();
if (pid < 0)
buf += xsnprintf (buf, endbuf - buf, "p-%x.", -pid);
else
buf += xsnprintf (buf, endbuf - buf, "p%x.", pid);
}
- tid = ptid_get_lwp (ptid);
+ tid = ptid.lwp ();
if (tid < 0)
buf += xsnprintf (buf, endbuf - buf, "-%x", -tid);
else
pp = unpack_varlen_hex (p + 1, &tid);
if (obuf)
*obuf = pp;
- return ptid_build (pid, tid, 0);
+ return ptid_t (pid, tid, 0);
}
/* No multi-process. Just a tid. */
what's in inferior_ptid, unless it's null at this point. If so,
then since there's no way to know the pid of the reported
threads, use the magic number. */
- if (ptid_equal (inferior_ptid, null_ptid))
- pid = ptid_get_pid (magic_null_ptid);
+ if (inferior_ptid == null_ptid)
+ pid = magic_null_ptid.pid ();
else
- pid = ptid_get_pid (inferior_ptid);
+ pid = inferior_ptid.pid ();
if (obuf)
*obuf = pp;
- return ptid_build (pid, tid, 0);
+ return ptid_t (pid, tid, 0);
}
static int
#define TAG_MOREDISPLAY 16 /* Whatever the kernel wants to say about
the process. */
-static int
-remote_unpack_thread_info_response (char *pkt, threadref *expectedref,
- struct gdb_ext_thread_info *info)
+int
+remote_target::remote_unpack_thread_info_response (char *pkt,
+ threadref *expectedref,
+ gdb_ext_thread_info *info)
{
struct remote_state *rs = get_remote_state ();
int mask, length;
int tag;
threadref ref;
- char *limit = pkt + rs->buf_size; /* Plausible parsing limit. */
+ char *limit = pkt + rs->buf.size (); /* Plausible parsing limit. */
int retval = 1;
/* info->threadid = 0; FIXME: implement zero_threadref. */
}
copy_threadref (&info->threadid, &ref);
- /* Loop on tagged fields , try to bail if somthing goes wrong. */
+ /* Loop on tagged fields , try to bail if something goes wrong. */
/* Packets are terminated with nulls. */
while ((pkt < limit) && mask && *pkt)
return retval;
}
-static int
-remote_get_threadinfo (threadref *threadid, int fieldset, /* TAG mask */
- struct gdb_ext_thread_info *info)
+int
+remote_target::remote_get_threadinfo (threadref *threadid,
+ int fieldset,
+ gdb_ext_thread_info *info)
{
struct remote_state *rs = get_remote_state ();
int result;
- pack_threadinfo_request (rs->buf, fieldset, threadid);
+ pack_threadinfo_request (rs->buf.data (), fieldset, threadid);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == '\0')
return 0;
- result = remote_unpack_thread_info_response (rs->buf + 2,
+ result = remote_unpack_thread_info_response (&rs->buf[2],
threadid, info);
return result;
}
/* Encoding: 'q':8,'M':8,count:16,done:8,argthreadid:64,(threadid:64)* */
-static int
-parse_threadlist_response (char *pkt, int result_limit,
- threadref *original_echo, threadref *resultlist,
- int *doneflag)
+int
+remote_target::parse_threadlist_response (char *pkt, int result_limit,
+ threadref *original_echo,
+ threadref *resultlist,
+ int *doneflag)
{
struct remote_state *rs = get_remote_state ();
char *limit;
resultcount = 0;
/* Assume the 'q' and 'M chars have been stripped. */
- limit = pkt + (rs->buf_size - BUF_THREAD_ID_SIZE);
+ limit = pkt + (rs->buf.size () - BUF_THREAD_ID_SIZE);
/* done parse past here */
pkt = unpack_byte (pkt, &count); /* count field */
pkt = unpack_nibble (pkt, &done);
/* Fetch the next batch of threads from the remote. Returns -1 if the
qL packet is not supported, 0 on error and 1 on success. */
-static int
-remote_get_threadlist (int startflag, threadref *nextthread, int result_limit,
- int *done, int *result_count, threadref *threadlist)
+int
+remote_target::remote_get_threadlist (int startflag, threadref *nextthread,
+ int result_limit, int *done, int *result_count,
+ threadref *threadlist)
{
struct remote_state *rs = get_remote_state ();
int result = 1;
- /* Trancate result limit to be smaller than the packet size. */
+ /* Truncate result limit to be smaller than the packet size. */
if ((((result_limit + 1) * BUF_THREAD_ID_SIZE) + 10)
>= get_remote_packet_size ())
result_limit = (get_remote_packet_size () / BUF_THREAD_ID_SIZE) - 2;
- pack_threadlist_request (rs->buf, startflag, result_limit, nextthread);
+ pack_threadlist_request (rs->buf.data (), startflag, result_limit,
+ nextthread);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (*rs->buf == '\0')
+ getpkt (&rs->buf, 0);
+ if (rs->buf[0] == '\0')
{
/* Packet not supported. */
return -1;
}
*result_count =
- parse_threadlist_response (rs->buf + 2, result_limit,
+ parse_threadlist_response (&rs->buf[2], result_limit,
&rs->echo_nextthread, threadlist, done);
if (!threadmatch (&rs->echo_nextthread, nextthread))
{
/* FIXME: This is a good reason to drop the packet. */
- /* Possably, there is a duplicate response. */
- /* Possabilities :
+ /* Possibly, there is a duplicate response. */
+ /* Possibilities :
retransmit immediatly - race conditions
retransmit after timeout - yes
exit
STEPFUNCTION returns false. If the packet is not supported,
returns -1. */
-static int
-remote_threadlist_iterator (rmt_thread_action stepfunction, void *context,
- int looplimit)
+int
+remote_target::remote_threadlist_iterator (rmt_thread_action stepfunction,
+ void *context, int looplimit)
{
struct remote_state *rs = get_remote_state ();
int done, i, result_count;
#define CRAZY_MAX_THREADS 1000
-static ptid_t
-remote_current_thread (ptid_t oldpid)
+ptid_t
+remote_target::remote_current_thread (ptid_t oldpid)
{
struct remote_state *rs = get_remote_state ();
putpkt ("qC");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == 'Q' && rs->buf[1] == 'C')
{
const char *obuf;
/* List remote threads using the deprecated qL packet. */
-static int
-remote_get_threads_with_ql (struct target_ops *ops,
- struct threads_listing_context *context)
+int
+remote_target::remote_get_threads_with_ql (threads_listing_context *context)
{
if (remote_threadlist_iterator (remote_newthread_step, context,
CRAZY_MAX_THREADS) >= 0)
/* List remote threads using qXfer:threads:read. */
-static int
-remote_get_threads_with_qxfer (struct target_ops *ops,
- struct threads_listing_context *context)
+int
+remote_target::remote_get_threads_with_qxfer (threads_listing_context *context)
{
#if defined(HAVE_LIBEXPAT)
if (packet_support (PACKET_qXfer_threads) == PACKET_ENABLE)
{
gdb::optional<gdb::char_vector> xml
- = target_read_stralloc (ops, TARGET_OBJECT_THREADS, NULL);
+ = target_read_stralloc (this, TARGET_OBJECT_THREADS, NULL);
if (xml && (*xml)[0] != '\0')
{
/* List remote threads using qfThreadInfo/qsThreadInfo. */
-static int
-remote_get_threads_with_qthreadinfo (struct target_ops *ops,
- struct threads_listing_context *context)
+int
+remote_target::remote_get_threads_with_qthreadinfo (threads_listing_context *context)
{
struct remote_state *rs = get_remote_state ();
const char *bufp;
putpkt ("qfThreadInfo");
- getpkt (&rs->buf, &rs->buf_size, 0);
- bufp = rs->buf;
+ getpkt (&rs->buf, 0);
+ bufp = rs->buf.data ();
if (bufp[0] != '\0') /* q packet recognized */
{
while (*bufp++ == 'm') /* reply contains one or more TID */
}
while (*bufp++ == ','); /* comma-separated list */
putpkt ("qsThreadInfo");
- getpkt (&rs->buf, &rs->buf_size, 0);
- bufp = rs->buf;
+ getpkt (&rs->buf, 0);
+ bufp = rs->buf.data ();
}
return 1;
}
/* We have a few different mechanisms to fetch the thread list. Try
them all, starting with the most preferred one first, falling
back to older methods. */
- if (remote_get_threads_with_qxfer (this, &context)
- || remote_get_threads_with_qthreadinfo (this, &context)
- || remote_get_threads_with_ql (this, &context))
+ if (remote_get_threads_with_qxfer (&context)
+ || remote_get_threads_with_qthreadinfo (&context)
+ || remote_get_threads_with_ql (&context))
{
- struct thread_info *tp, *tmp;
-
got_list = 1;
if (context.items.empty ()
/* CONTEXT now holds the current thread list on the remote
target end. Delete GDB-side threads no longer found on the
target. */
- ALL_THREADS_SAFE (tp, tmp)
+ for (thread_info *tp : all_threads_safe ())
{
if (!context.contains_thread (tp->ptid))
{
/* Not found. */
- delete_thread (tp->ptid);
+ delete_thread (tp);
}
}
remote_notice_new_inferior (item.ptid, executing);
- remote_thread_info *info = get_remote_thread_info (item.ptid);
+ thread_info *tp = find_thread_ptid (item.ptid);
+ remote_thread_info *info = get_remote_thread_info (tp);
info->core = item.core;
info->extra = std::move (item.extra);
info->name = std::move (item.name);
remote_target::extra_thread_info (thread_info *tp)
{
struct remote_state *rs = get_remote_state ();
- int result;
int set;
threadref id;
struct gdb_ext_thread_info threadinfo;
- static char display_buf[100]; /* arbitrary... */
- int n = 0; /* position in display_buf */
if (rs->remote_desc == 0) /* paranoia */
internal_error (__FILE__, __LINE__,
_("remote_threads_extra_info"));
- if (ptid_equal (tp->ptid, magic_null_ptid)
- || (ptid_get_pid (tp->ptid) != 0 && ptid_get_lwp (tp->ptid) == 0))
+ if (tp->ptid == magic_null_ptid
+ || (tp->ptid.pid () != 0 && tp->ptid.lwp () == 0))
/* This is the main thread which was added by GDB. The remote
server doesn't know about it. */
return NULL;
+ std::string &extra = get_remote_thread_info (tp)->extra;
+
+ /* If already have cached info, use it. */
+ if (!extra.empty ())
+ return extra.c_str ();
+
if (packet_support (PACKET_qXfer_threads) == PACKET_ENABLE)
{
- struct thread_info *info = find_thread_ptid (tp->ptid);
-
- if (info != NULL && info->priv != NULL)
- {
- const std::string &extra = get_remote_thread_info (info)->extra;
- return !extra.empty () ? extra.c_str () : NULL;
- }
- else
- return NULL;
+ /* If we're using qXfer:threads:read, then the extra info is
+ included in the XML. So if we didn't have anything cached,
+ it's because there's really no extra info. */
+ return NULL;
}
if (rs->use_threadextra_query)
{
- char *b = rs->buf;
- char *endb = rs->buf + get_remote_packet_size ();
+ char *b = rs->buf.data ();
+ char *endb = b + get_remote_packet_size ();
xsnprintf (b, endb - b, "qThreadExtraInfo,");
b += strlen (b);
write_ptid (b, endb, tp->ptid);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (rs->buf[0] != 0)
{
- n = std::min (strlen (rs->buf) / 2, sizeof (display_buf));
- result = hex2bin (rs->buf, (gdb_byte *) display_buf, n);
- display_buf [result] = '\0';
- return display_buf;
+ extra.resize (strlen (rs->buf.data ()) / 2);
+ hex2bin (rs->buf.data (), (gdb_byte *) &extra[0], extra.size ());
+ return extra.c_str ();
}
}
rs->use_threadextra_query = 0;
set = TAG_THREADID | TAG_EXISTS | TAG_THREADNAME
| TAG_MOREDISPLAY | TAG_DISPLAY;
- int_to_threadref (&id, ptid_get_lwp (tp->ptid));
+ int_to_threadref (&id, tp->ptid.lwp ());
if (remote_get_threadinfo (&id, set, &threadinfo))
if (threadinfo.active)
{
if (*threadinfo.shortname)
- n += xsnprintf (&display_buf[0], sizeof (display_buf) - n,
- " Name: %s,", threadinfo.shortname);
+ string_appendf (extra, " Name: %s", threadinfo.shortname);
if (*threadinfo.display)
- n += xsnprintf (&display_buf[n], sizeof (display_buf) - n,
- " State: %s,", threadinfo.display);
+ {
+ if (!extra.empty ())
+ extra += ',';
+ string_appendf (extra, " State: %s", threadinfo.display);
+ }
if (*threadinfo.more_display)
- n += xsnprintf (&display_buf[n], sizeof (display_buf) - n,
- " Priority: %s", threadinfo.more_display);
-
- if (n > 0)
{
- /* For purely cosmetic reasons, clear up trailing commas. */
- if (',' == display_buf[n-1])
- display_buf[n-1] = ' ';
- return display_buf;
+ if (!extra.empty ())
+ extra += ',';
+ string_appendf (extra, " Priority: %s", threadinfo.more_display);
}
+ return extra.c_str ();
}
return NULL;
}
struct static_tracepoint_marker *marker)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
xsnprintf (p, get_remote_packet_size (), "qTSTMat:");
p += strlen (p);
p += hexnumstr (p, addr);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
if (*p == 'E')
error (_("Remote failure reply: %s"), p);
/* Ask for a first packet of static tracepoint marker
definition. */
putpkt ("qTfSTM");
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
if (*p == 'E')
error (_("Remote failure reply: %s"), p);
while (*p++ == ','); /* comma-separated list */
/* Ask for another packet of static tracepoint definition. */
putpkt ("qTsSTM");
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
}
return markers;
ptid_t
remote_target::get_ada_task_ptid (long lwp, long thread)
{
- return ptid_build (ptid_get_pid (inferior_ptid), lwp, 0);
+ return ptid_t (inferior_ptid.pid (), lwp, 0);
}
\f
/* Restart the remote side; this is an extended protocol operation. */
-static void
-extended_remote_restart (void)
+void
+remote_target::extended_remote_restart ()
{
struct remote_state *rs = get_remote_state ();
/* Send the restart command; for reasons I don't understand the
remote side really expects a number after the "R". */
- xsnprintf (rs->buf, get_remote_packet_size (), "R%x", 0);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "R%x", 0);
putpkt (rs->buf);
remote_fileio_reset ();
void
remote_target::close ()
{
- struct remote_state *rs = get_remote_state ();
-
- if (rs->remote_desc == NULL)
- return; /* already closed */
-
/* Make sure we leave stdin registered in the event loop. */
terminal_ours ();
- serial_close (rs->remote_desc);
- rs->remote_desc = NULL;
-
/* We don't have a connection to the remote stub anymore. Get rid
of all the inferiors and their threads we were controlling.
Reset inferior_ptid to null_ptid first, as otherwise has_stack_frame
inferior_ptid = null_ptid;
discard_all_inferiors ();
- /* We are closing the remote target, so we should discard
- everything of this target. */
- discard_pending_stop_replies_in_queue (rs);
+ trace_reset_local_state ();
- if (remote_async_inferior_event_token)
- delete_async_event_handler (&remote_async_inferior_event_token);
+ delete this;
+}
- remote_notif_state_xfree (rs->notif_state);
+remote_target::~remote_target ()
+{
+ struct remote_state *rs = get_remote_state ();
- trace_reset_local_state ();
+ /* Check for NULL because we may get here with a partially
+ constructed target/connection. */
+ if (rs->remote_desc == nullptr)
+ return;
+
+ serial_close (rs->remote_desc);
+
+ /* We are destroying the remote target, so we should discard
+ everything of this target. */
+ discard_pending_stop_replies_in_queue ();
+
+ if (rs->remote_async_inferior_event_token)
+ delete_async_event_handler (&rs->remote_async_inferior_event_token);
+
+ delete rs->notif_state;
}
/* Query the remote side for the text, data and bss offsets. */
-static void
-get_offsets (void)
+void
+remote_target::get_offsets ()
{
struct remote_state *rs = get_remote_state ();
char *buf;
return;
putpkt ("qOffsets");
- getpkt (&rs->buf, &rs->buf_size, 0);
- buf = rs->buf;
+ getpkt (&rs->buf, 0);
+ buf = rs->buf.data ();
if (buf[0] == '\000')
return; /* Return silently. Stub doesn't support
}
/* Send interrupt_sequence to remote target. */
-static void
-send_interrupt_sequence (void)
+
+void
+remote_target::send_interrupt_sequence ()
{
struct remote_state *rs = get_remote_state ();
ask the remote which is the current thread with qC. The former
method avoids a roundtrip. */
-static ptid_t
-get_current_thread (char *wait_status)
+ptid_t
+remote_target::get_current_thread (char *wait_status)
{
ptid_t ptid = null_ptid;
this point. */
if (wait_status != NULL)
ptid = stop_reply_extract_thread (wait_status);
- if (ptid_equal (ptid, null_ptid))
+ if (ptid == null_ptid)
ptid = remote_current_thread (inferior_ptid);
return ptid;
qC query, we infer the current thread from that stop reply, passed
in in WAIT_STATUS, which may be NULL. */
-static void
-add_current_inferior_and_thread (char *wait_status)
+void
+remote_target::add_current_inferior_and_thread (char *wait_status)
{
struct remote_state *rs = get_remote_state ();
- int fake_pid_p = 0;
+ bool fake_pid_p = false;
inferior_ptid = null_ptid;
if (curr_ptid != null_ptid)
{
if (!remote_multi_process_p (rs))
- fake_pid_p = 1;
+ fake_pid_p = true;
}
else
{
double duty as both the pid of the target process (if it has
such), and as a flag indicating that a target is active. */
curr_ptid = magic_null_ptid;
- fake_pid_p = 1;
+ fake_pid_p = true;
}
- remote_add_inferior (fake_pid_p, ptid_get_pid (curr_ptid), -1, 1);
+ remote_add_inferior (fake_pid_p, curr_ptid.pid (), -1, 1);
/* Add the main thread and switch to it. Don't try reading
registers yet, since we haven't fetched the target description
{
struct target_waitstatus *ws = &thread->suspend.waitstatus;
- switch_to_thread (thread->ptid);
- stop_pc = get_frame_pc (get_current_frame ());
+ switch_to_thread (thread);
+ thread->suspend.stop_pc = get_frame_pc (get_current_frame ());
set_current_sal_from_frame (get_current_frame ());
thread->suspend.waitstatus_pending_p = 0;
on initial connection. We mark these threads as stopped and print
their current frame before giving the user the prompt. */
-static void
-process_initial_stop_replies (int from_tty)
+void
+remote_target::process_initial_stop_replies (int from_tty)
{
int pending_stop_replies = stop_reply_queue_length ();
- struct inferior *inf;
- struct thread_info *thread;
struct thread_info *selected = NULL;
struct thread_info *lowest_stopped = NULL;
struct thread_info *first = NULL;
ptid_t event_ptid;
struct target_waitstatus ws;
int ignore_event = 0;
- struct thread_info *thread;
memset (&ws, 0, sizeof (ws));
event_ptid = target_wait (waiton_ptid, &ws, TARGET_WNOHANG);
if (ignore_event)
continue;
- thread = find_thread_ptid (event_ptid);
+ struct thread_info *evthread = find_thread_ptid (event_ptid);
if (ws.kind == TARGET_WAITKIND_STOPPED)
{
instead of signal 0. Suppress it. */
if (sig == GDB_SIGNAL_TRAP)
sig = GDB_SIGNAL_0;
- thread->suspend.stop_signal = sig;
+ evthread->suspend.stop_signal = sig;
ws.value.sig = sig;
}
- thread->suspend.waitstatus = ws;
+ evthread->suspend.waitstatus = ws;
if (ws.kind != TARGET_WAITKIND_STOPPED
|| ws.value.sig != GDB_SIGNAL_0)
- thread->suspend.waitstatus_pending_p = 1;
+ evthread->suspend.waitstatus_pending_p = 1;
set_executing (event_ptid, 0);
set_running (event_ptid, 0);
- get_remote_thread_info (thread)->vcont_resumed = 0;
+ get_remote_thread_info (evthread)->vcont_resumed = 0;
}
/* "Notice" the new inferiors before anything related to
registers/memory. */
- ALL_INFERIORS (inf)
+ for (inferior *inf : all_non_exited_inferiors ())
{
- if (inf->pid == 0)
- continue;
-
inf->needs_setup = 1;
if (non_stop)
{
- thread = any_live_thread_of_process (inf->pid);
- notice_new_inferior (thread->ptid,
- thread->state == THREAD_RUNNING,
+ thread_info *thread = any_live_thread_of_inferior (inf);
+ notice_new_inferior (thread, thread->state == THREAD_RUNNING,
from_tty);
}
}
/* If all threads of an inferior were already stopped, we
haven't setup the inferior yet. */
- ALL_INFERIORS (inf)
+ for (inferior *inf : all_non_exited_inferiors ())
{
- if (inf->pid == 0)
- continue;
-
if (inf->needs_setup)
{
- thread = any_live_thread_of_process (inf->pid);
+ thread_info *thread = any_live_thread_of_inferior (inf);
switch_to_thread_no_regs (thread);
setup_inferior (0);
}
/* Now go over all threads that are stopped, and print their current
frame. If all-stop, then if there's a signalled thread, pick
that as current. */
- ALL_NON_EXITED_THREADS (thread)
+ for (thread_info *thread : all_non_exited_threads ())
{
if (first == NULL)
first = thread;
if (!non_stop)
- set_running (thread->ptid, 0);
+ thread->set_running (false);
else if (thread->state != THREAD_STOPPED)
continue;
others with their status pending. */
if (!non_stop)
{
- thread = selected;
+ thread_info *thread = selected;
if (thread == NULL)
thread = lowest_stopped;
if (thread == NULL)
}
/* For "info program". */
- thread = inferior_thread ();
+ thread_info *thread = inferior_thread ();
if (thread->state == THREAD_STOPPED)
set_last_target_status (inferior_ptid, thread->suspend.waitstatus);
}
const char v_mustreplyempty[] = "vMustReplyEmpty";
putpkt (v_mustreplyempty);
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") == 0)
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") == 0)
remote_protocol_packets[PACKET_vFile_setfs].support = PACKET_DISABLE;
- else if (strcmp (rs->buf, "") != 0)
+ else if (strcmp (rs->buf.data (), "") != 0)
error (_("Remote replied unexpectedly to '%s': %s"), v_mustreplyempty,
- rs->buf);
+ rs->buf.data ());
}
/* Next, we possibly activate noack mode.
if (packet_config_support (noack_config) != PACKET_DISABLE)
{
putpkt ("QStartNoAckMode");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_ok (rs->buf, noack_config) == PACKET_OK)
rs->noack_mode = 1;
}
{
/* Tell the remote that we are using the extended protocol. */
putpkt ("!");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
}
/* Let the target know which signals it is allowed to pass down to
"does not support non-stop"));
putpkt ("QNonStop:1");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Remote refused setting non-stop mode with: %s"), rs->buf);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Remote refused setting non-stop mode with: %s"),
+ rs->buf.data ());
/* Find about threads and processes the stub is already
controlling. We default to adding them in the running state.
/* Don't assume that the stub can operate in all-stop mode.
Request it explicitly. */
putpkt ("QNonStop:0");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Remote refused setting all-stop mode with: %s"), rs->buf);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Remote refused setting all-stop mode with: %s"),
+ rs->buf.data ());
}
/* Upload TSVs regardless of whether the target is running or not. The
/* Check whether the target is running now. */
putpkt ("?");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (!target_is_non_stop_p ())
{
else
{
/* Save the reply for later. */
- wait_status = (char *) alloca (strlen (rs->buf) + 1);
- strcpy (wait_status, rs->buf);
+ wait_status = (char *) alloca (strlen (rs->buf.data ()) + 1);
+ strcpy (wait_status, rs->buf.data ());
}
/* Fetch thread list. */
multi-threaded program, this will ideally be the thread
that last reported an event before GDB disconnected. */
inferior_ptid = get_current_thread (wait_status);
- if (ptid_equal (inferior_ptid, null_ptid))
+ if (inferior_ptid == null_ptid)
{
/* Odd... The target was able to list threads, but not
tell us which thread was current (no "thread"
"warning: couldn't determine remote "
"current thread; picking first in list.\n");
- inferior_ptid = thread_list->ptid;
+ inferior_ptid = inferior_list->thread_list->ptid;
}
}
/* Use the previously fetched status. */
gdb_assert (wait_status != NULL);
- strcpy (rs->buf, wait_status);
+ strcpy (rs->buf.data (), wait_status);
rs->cached_wait_status = 1;
::start_remote (from_tty); /* Initialize gdb process mechanisms. */
reply. In the latter case, there may be more than one thread
stopped --- we pull them all out using the vStopped
mechanism. */
- if (strcmp (rs->buf, "OK") != 0)
+ if (strcmp (rs->buf.data (), "OK") != 0)
{
struct notif_client *notif = ¬if_client_stop;
/* remote_notif_get_pending_replies acks this one, and gets
the rest out. */
rs->notif_state->pending_event[notif_client_stop.id]
- = remote_notif_parse (notif, rs->buf);
+ = remote_notif_parse (this, notif, rs->buf.data ());
remote_notif_get_pending_events (notif);
}
gdb_assert (wait_status == NULL);
/* Report all signals during attach/startup. */
- pass_signals (0, NULL);
+ pass_signals ({});
/* If there are already stopped threads, mark them stopped and
report their stops before giving the prompt to the user. */
/* Symbol look-up. */
-static void
-remote_check_symbols (void)
+void
+remote_target::remote_check_symbols ()
{
- char *msg, *reply, *tmp;
+ char *tmp;
int end;
- long reply_size;
- struct cleanup *old_chain;
/* The remote side has no concept of inferiors that aren't running
yet, it only knows about running processes. If we're connected
/* Allocate a message buffer. We can't reuse the input buffer in RS,
because we need both at the same time. */
- msg = (char *) xmalloc (get_remote_packet_size ());
- old_chain = make_cleanup (xfree, msg);
- reply = (char *) xmalloc (get_remote_packet_size ());
- make_cleanup (free_current_contents, &reply);
- reply_size = get_remote_packet_size ();
+ gdb::char_vector msg (get_remote_packet_size ());
+ gdb::char_vector reply (get_remote_packet_size ());
/* Invite target to request symbol lookups. */
putpkt ("qSymbol::");
- getpkt (&reply, &reply_size, 0);
+ getpkt (&reply, 0);
packet_ok (reply, &remote_protocol_packets[PACKET_qSymbol]);
- while (startswith (reply, "qSymbol:"))
+ while (startswith (reply.data (), "qSymbol:"))
{
struct bound_minimal_symbol sym;
tmp = &reply[8];
- end = hex2bin (tmp, (gdb_byte *) msg, strlen (tmp) / 2);
+ end = hex2bin (tmp, reinterpret_cast <gdb_byte *> (msg.data ()),
+ strlen (tmp) / 2);
msg[end] = '\0';
- sym = lookup_minimal_symbol (msg, NULL, NULL);
+ sym = lookup_minimal_symbol (msg.data (), NULL, NULL);
if (sym.minsym == NULL)
- xsnprintf (msg, get_remote_packet_size (), "qSymbol::%s", &reply[8]);
+ xsnprintf (msg.data (), get_remote_packet_size (), "qSymbol::%s",
+ &reply[8]);
else
{
int addr_size = gdbarch_addr_bit (target_gdbarch ()) / 8;
instead of any data function descriptor. */
sym_addr = gdbarch_convert_from_func_ptr_addr (target_gdbarch (),
sym_addr,
- target_stack);
+ current_top_target ());
- xsnprintf (msg, get_remote_packet_size (), "qSymbol:%s:%s",
+ xsnprintf (msg.data (), get_remote_packet_size (), "qSymbol:%s:%s",
phex_nz (sym_addr, addr_size), &reply[8]);
}
-
- putpkt (msg);
- getpkt (&reply, &reply_size, 0);
- }
- do_cleanups (old_chain);
+ putpkt (msg.data ());
+ getpkt (&reply, 0);
+ }
}
static struct serial *
{
struct remote_state *rs = get_remote_state ();
- xsnprintf (rs->buf, get_remote_packet_size (), "QAllow:"
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "QAllow:"
"WriteReg:%x;WriteMem:%x;"
"InsertBreak:%x;InsertTrace:%x;"
"InsertFastTrace:%x;Stop:%x",
may_insert_breakpoints, may_insert_tracepoints,
may_insert_fast_tracepoints, may_stop);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
/* If the target didn't like the packet, warn the user. Do not try
to undo the user's settings, that would just be maddening. */
- if (strcmp (rs->buf, "OK") != 0)
- warning (_("Remote refused setting permissions with: %s"), rs->buf);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ warning (_("Remote refused setting permissions with: %s"),
+ rs->buf.data ());
}
/* This type describes each known response to the qSupported
not reported). The third argument may be NULL; if not NULL, it
is a NUL-terminated string taken from the packet following
this feature's name and an equals sign. */
- void (*func) (const struct protocol_feature *, enum packet_support,
- const char *);
+ void (*func) (remote_target *remote, const struct protocol_feature *,
+ enum packet_support, const char *);
/* The corresponding packet for this feature. Only used if
FUNC is remote_supported_packet. */
};
static void
-remote_supported_packet (const struct protocol_feature *feature,
+remote_supported_packet (remote_target *remote,
+ const struct protocol_feature *feature,
enum packet_support support,
const char *argument)
{
remote_protocol_packets[feature->packet].support = support;
}
-static void
-remote_packet_size (const struct protocol_feature *feature,
- enum packet_support support, const char *value)
+void
+remote_target::remote_packet_size (const protocol_feature *feature,
+ enum packet_support support, const char *value)
{
struct remote_state *rs = get_remote_state ();
rs->explicit_packet_size = packet_size;
}
+void
+remote_packet_size (remote_target *remote, const protocol_feature *feature,
+ enum packet_support support, const char *value)
+{
+ remote->remote_packet_size (feature, support, value);
+}
+
static const struct protocol_feature remote_protocol_features[] = {
{ "PacketSize", PACKET_DISABLE, remote_packet_size, -1 },
{ "qXfer:auxv:read", PACKET_DISABLE, remote_supported_packet,
remote_supported_packet, PACKET_augmented_libraries_svr4_read_feature },
{ "qXfer:memory-map:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_memory_map },
- { "qXfer:spu:read", PACKET_DISABLE, remote_supported_packet,
- PACKET_qXfer_spu_read },
- { "qXfer:spu:write", PACKET_DISABLE, remote_supported_packet,
- PACKET_qXfer_spu_write },
{ "qXfer:osdata:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_osdata },
{ "qXfer:threads:read", PACKET_DISABLE, remote_supported_packet,
else
{
char *copy = xstrdup (remote_support_xml + 13);
- char *p = strtok (copy, ",");
+ char *saveptr;
+ char *p = strtok_r (copy, ",", &saveptr);
do
{
return;
}
}
- while ((p = strtok (NULL, ",")) != NULL);
+ while ((p = strtok_r (NULL, ",", &saveptr)) != NULL);
xfree (copy);
remote_support_xml = reconcat (remote_support_xml,
msg->append (append);
}
-static void
-remote_query_supported (void)
+void
+remote_target::remote_query_supported ()
{
struct remote_state *rs = get_remote_state ();
char *next;
q = "qSupported:" + q;
putpkt (q.c_str ());
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
/* If an error occured, warn, but do not return - just reset the
buffer to empty and go on to disable features. */
if (packet_ok (rs->buf, &remote_protocol_packets[PACKET_qSupported])
== PACKET_ERROR)
{
- warning (_("Remote failure reply: %s"), rs->buf);
+ warning (_("Remote failure reply: %s"), rs->buf.data ());
rs->buf[0] = 0;
}
}
memset (seen, 0, sizeof (seen));
- next = rs->buf;
+ next = rs->buf.data ();
while (*next)
{
enum packet_support is_supported;
seen[i] = 1;
feature = &remote_protocol_features[i];
- feature->func (feature, is_supported, value);
+ feature->func (this, feature, is_supported, value);
break;
}
}
buffer size also. We delay this until after parsing the entire
qSupported packet, because this is the same buffer we were
parsing. */
- if (rs->buf_size < rs->explicit_packet_size)
- {
- rs->buf_size = rs->explicit_packet_size;
- rs->buf = (char *) xrealloc (rs->buf, rs->buf_size);
- }
+ if (rs->buf.size () < rs->explicit_packet_size)
+ rs->buf.resize (rs->explicit_packet_size);
/* Handle the defaults for unmentioned features. */
for (i = 0; i < ARRAY_SIZE (remote_protocol_features); i++)
const struct protocol_feature *feature;
feature = &remote_protocol_features[i];
- feature->func (feature, feature->default_support, NULL);
+ feature->func (this, feature, feature->default_support, NULL);
}
}
is probably wedged --- offer to quit/disconnect.
*/
-static void
-remote_serial_quit_handler (void)
+void
+remote_target::remote_serial_quit_handler ()
{
struct remote_state *rs = get_remote_state ();
}
}
+/* The remote_target that is current while the quit handler is
+ overridden with remote_serial_quit_handler. */
+static remote_target *curr_quit_handler_target;
+
+static void
+remote_serial_quit_handler ()
+{
+ curr_quit_handler_target->remote_serial_quit_handler ();
+}
+
/* Remove any of the remote.c targets from target stack. Upper targets depend
on it so remove them first. */
void
remote_target::open_1 (const char *name, int from_tty, int extended_p)
{
- struct remote_state *rs = get_remote_state ();
+ remote_target *curr_remote = get_current_remote_target ();
if (name == 0)
error (_("To open a remote debug connection, you need to specify what\n"
"serial device is attached to the remote system\n"
"(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.)."));
- /* See FIXME above. */
- if (!target_async_permitted)
- wait_forever_enabled_p = 1;
-
/* If we're connected to a running target, target_preopen will kill it.
Ask this question first, before target_preopen has a chance to kill
anything. */
- if (rs->remote_desc != NULL && !have_inferiors ())
+ if (curr_remote != NULL && !have_inferiors ())
{
if (from_tty
&& !query (_("Already connected to a remote target. Disconnect? ")))
/* Here the possibly existing remote target gets unpushed. */
target_preopen (from_tty);
- /* Make sure we send the passed signals list the next time we resume. */
- xfree (rs->last_pass_packet);
- rs->last_pass_packet = NULL;
-
- /* Make sure we send the program signals list the next time we
- resume. */
- xfree (rs->last_program_signals_packet);
- rs->last_program_signals_packet = NULL;
-
remote_fileio_reset ();
reopen_exec_file ();
reread_symbols ();
+ remote_target *remote
+ = (extended_p ? new extended_remote_target () : new remote_target ());
+ target_ops_up target_holder (remote);
+
+ remote_state *rs = remote->get_remote_state ();
+
+ /* See FIXME above. */
+ if (!target_async_permitted)
+ rs->wait_forever_enabled_p = 1;
+
rs->remote_desc = remote_serial_open (name);
if (!rs->remote_desc)
perror_with_name (name);
puts_filtered ("\n");
}
- remote_target *target
- = extended_p ? &extended_remote_ops : &remote_ops;
- push_target (target); /* Switch to using remote target now. */
+ /* Switch to using the remote target now. */
+ push_target (std::move (target_holder));
/* Register extra event sources in the event loop. */
- remote_async_inferior_event_token
+ rs->remote_async_inferior_event_token
= create_async_event_handler (remote_async_inferior_event_handler,
- NULL);
- rs->notif_state = remote_notif_state_allocate ();
+ remote);
+ rs->notif_state = remote_notif_state_allocate (remote);
/* Reset the target state; these things will be queried either by
remote_query_supported or as they are needed. */
rs->use_threadinfo_query = 1;
rs->use_threadextra_query = 1;
- readahead_cache_invalidate ();
+ rs->readahead_cache.invalidate ();
if (target_async_permitted)
{
around this. Eventually a mechanism that allows
wait_for_inferior() to expect/get timeouts will be
implemented. */
- wait_forever_enabled_p = 0;
+ rs->wait_forever_enabled_p = 0;
}
/* First delete any symbols previously loaded from shared libraries. */
no_shared_libraries (NULL, 0);
- /* Start afresh. */
- init_thread_list ();
-
/* Start the remote connection. If error() or QUIT, discard this
target (we'd otherwise be in an inconsistent state) and then
propogate the error on up the exception chain. This ensures that
function. See cli-dump.c. */
{
- TRY
+ try
{
- target->start_remote (from_tty, extended_p);
+ remote->start_remote (from_tty, extended_p);
}
- CATCH (ex, RETURN_MASK_ALL)
+ catch (const gdb_exception &ex)
{
/* Pop the partially set up target - unless something else did
already before throwing the exception. */
- if (rs->remote_desc != NULL)
+ if (ex.error != TARGET_CLOSE_ERROR)
remote_unpush_target ();
- if (target_async_permitted)
- wait_forever_enabled_p = 1;
- throw_exception (ex);
+ throw;
}
- END_CATCH
}
- remote_btrace_reset ();
+ remote_btrace_reset (rs);
if (target_async_permitted)
- wait_forever_enabled_p = 1;
+ rs->wait_forever_enabled_p = 1;
}
/* Detach the specified process. */
-static void
-remote_detach_pid (int pid)
+void
+remote_target::remote_detach_pid (int pid)
{
struct remote_state *rs = get_remote_state ();
+ /* This should not be necessary, but the handling for D;PID in
+ GDBserver versions prior to 8.2 incorrectly assumes that the
+ selected process points to the same process we're detaching,
+ leading to misbehavior (and possibly GDBserver crashing) when it
+ does not. Since it's easy and cheap, work around it by forcing
+ GDBserver to select GDB's current process. */
+ set_general_process ();
+
if (remote_multi_process_p (rs))
- xsnprintf (rs->buf, get_remote_packet_size (), "D;%x", pid);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "D;%x", pid);
else
- strcpy (rs->buf, "D");
+ strcpy (rs->buf.data (), "D");
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == 'O' && rs->buf[1] == 'K')
;
any breakpoints in the target program or it'll die when it hits
one. */
-static void
-remote_detach_1 (int from_tty, inferior *inf)
+void
+remote_target::remote_detach_1 (inferior *inf, int from_tty)
{
- int pid = ptid_get_pid (inferior_ptid);
+ int pid = inferior_ptid.pid ();
struct remote_state *rs = get_remote_state ();
- struct thread_info *tp = find_thread_ptid (inferior_ptid);
int is_fork_parent;
if (!target_has_execution)
if (from_tty && !rs->extended && number_of_live_inferiors () == 1)
puts_filtered (_("Ending remote debugging.\n"));
+ struct thread_info *tp = find_thread_ptid (inferior_ptid);
+
/* Check to see if we are detaching a fork parent. Note that if we
are detaching a fork child, tp == NULL. */
is_fork_parent = (tp != NULL
{
/* Save the pid as a string before mourning, since that will
unpush the remote target, and we need the string after. */
- std::string infpid = target_pid_to_str (pid_to_ptid (pid));
+ std::string infpid = target_pid_to_str (ptid_t (pid));
target_mourn_inferior (inferior_ptid);
if (print_inferior_events)
else
{
inferior_ptid = null_ptid;
- detach_inferior (pid);
+ detach_inferior (current_inferior ());
}
}
void
remote_target::detach (inferior *inf, int from_tty)
{
- remote_detach_1 (from_tty, inf);
+ remote_detach_1 (inf, from_tty);
}
void
extended_remote_target::detach (inferior *inf, int from_tty)
{
- remote_detach_1 (from_tty, inf);
+ remote_detach_1 (inf, from_tty);
}
/* Target follow-fork function for remote targets. On entry, and
pid_t child_pid;
child_ptid = inferior_thread ()->pending_follow.value.related_pid;
- child_pid = ptid_get_pid (child_ptid);
+ child_pid = child_ptid.pid ();
remote_detach_pid (child_pid);
}
follow-exec-mode is "new". */
void
-remote_target::follow_exec (struct inferior *inf, char *execd_pathname)
+remote_target::follow_exec (struct inferior *inf, const char *execd_pathname)
{
/* We know that this is a target file name, so if it has the "target:"
prefix we strip it off before saving it in the program space. */
if (exec_file)
printf_unfiltered (_("Attaching to program: %s, %s\n"), exec_file,
- target_pid_to_str (pid_to_ptid (pid)));
+ target_pid_to_str (ptid_t (pid)).c_str ());
else
printf_unfiltered (_("Attaching to %s\n"),
- target_pid_to_str (pid_to_ptid (pid)));
-
- gdb_flush (gdb_stdout);
+ target_pid_to_str (ptid_t (pid)).c_str ());
}
- xsnprintf (rs->buf, get_remote_packet_size (), "vAttach;%x", pid);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "vAttach;%x", pid);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf,
&remote_protocol_packets[PACKET_vAttach]))
if (!target_is_non_stop_p ())
{
/* Save the reply for later. */
- wait_status = (char *) alloca (strlen (rs->buf) + 1);
- strcpy (wait_status, rs->buf);
+ wait_status = (char *) alloca (strlen (rs->buf.data ()) + 1);
+ strcpy (wait_status, rs->buf.data ());
}
- else if (strcmp (rs->buf, "OK") != 0)
+ else if (strcmp (rs->buf.data (), "OK") != 0)
error (_("Attaching to %s failed with: %s"),
- target_pid_to_str (pid_to_ptid (pid)),
- rs->buf);
+ target_pid_to_str (ptid_t (pid)).c_str (),
+ rs->buf.data ());
break;
case PACKET_UNKNOWN:
error (_("This target does not support attaching to a process"));
default:
error (_("Attaching to %s failed"),
- target_pid_to_str (pid_to_ptid (pid)));
+ target_pid_to_str (ptid_t (pid)).c_str ());
}
- set_current_inferior (remote_add_inferior (0, pid, 1, 0));
+ set_current_inferior (remote_add_inferior (false, pid, 1, 0));
- inferior_ptid = pid_to_ptid (pid);
+ inferior_ptid = ptid_t (pid);
if (target_is_non_stop_p ())
{
/* Get list of threads. */
update_thread_list ();
- thread = first_thread_of_process (pid);
+ thread = first_thread_of_inferior (current_inferior ());
if (thread)
inferior_ptid = thread->ptid;
else
- inferior_ptid = pid_to_ptid (pid);
+ inferior_ptid = ptid_t (pid);
/* Invalidate our notion of the remote current thread. */
record_currthread (rs, minus_one_ptid);
if (target_can_async_p ())
{
struct notif_event *reply
- = remote_notif_parse (¬if_client_stop, wait_status);
+ = remote_notif_parse (this, ¬if_client_stop, wait_status);
push_stop_reply ((struct stop_reply *) reply);
else
{
gdb_assert (wait_status != NULL);
- strcpy (rs->buf, wait_status);
+ strcpy (rs->buf.data (), wait_status);
rs->cached_wait_status = 1;
}
}
/* Check for the availability of vCont. This function should also check
the response. */
-static void
-remote_vcont_probe (struct remote_state *rs)
+void
+remote_target::remote_vcont_probe ()
{
+ remote_state *rs = get_remote_state ();
char *buf;
- strcpy (rs->buf, "vCont?");
+ strcpy (rs->buf.data (), "vCont?");
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- buf = rs->buf;
+ getpkt (&rs->buf, 0);
+ buf = rs->buf.data ();
/* Make sure that the features we assume are supported. */
if (startswith (buf, "vCont"))
buf[0] = 0;
}
- packet_ok (buf, &remote_protocol_packets[PACKET_vCont]);
+ packet_ok (rs->buf, &remote_protocol_packets[PACKET_vCont]);
}
/* Helper function for building "vCont" resumptions. Write a
the thread to be stepped and/or signalled is given in the global
INFERIOR_PTID. */
-static char *
-append_resumption (char *p, char *endp,
- ptid_t ptid, int step, enum gdb_signal siggnal)
+char *
+remote_target::append_resumption (char *p, char *endp,
+ ptid_t ptid, int step, gdb_signal siggnal)
{
struct remote_state *rs = get_remote_state ();
threads with a wildcard (though the protocol allows it,
so stubs shouldn't make an active effort to forbid
it). */
- && !(remote_multi_process_p (rs) && ptid_is_pid (ptid)))
+ && !(remote_multi_process_p (rs) && ptid.is_pid ()))
{
struct thread_info *tp;
- if (ptid_equal (ptid, minus_one_ptid))
+ if (ptid == minus_one_ptid)
{
/* If we don't know about the target thread's tid, then
we're resuming magic_null_ptid (see caller). */
else
p += xsnprintf (p, endp - p, ";c");
- if (remote_multi_process_p (rs) && ptid_is_pid (ptid))
+ if (remote_multi_process_p (rs) && ptid.is_pid ())
{
ptid_t nptid;
/* All (-1) threads of process. */
- nptid = ptid_build (ptid_get_pid (ptid), -1, 0);
+ nptid = ptid_t (ptid.pid (), -1, 0);
p += xsnprintf (p, endp - p, ":");
p = write_ptid (p, endp, nptid);
}
- else if (!ptid_equal (ptid, minus_one_ptid))
+ else if (ptid != minus_one_ptid)
{
p += xsnprintf (p, endp - p, ":");
p = write_ptid (p, endp, ptid);
/* Append a vCont continue-with-signal action for threads that have a
non-zero stop signal. */
-static char *
-append_pending_thread_resumptions (char *p, char *endp, ptid_t ptid)
+char *
+remote_target::append_pending_thread_resumptions (char *p, char *endp,
+ ptid_t ptid)
{
- struct thread_info *thread;
-
- ALL_NON_EXITED_THREADS (thread)
- if (ptid_match (thread->ptid, ptid)
- && !ptid_equal (inferior_ptid, thread->ptid)
+ for (thread_info *thread : all_non_exited_threads (ptid))
+ if (inferior_ptid != thread->ptid
&& thread->suspend.stop_signal != GDB_SIGNAL_0)
{
p = append_resumption (p, endp, thread->ptid,
/* Set the target running, using the packets that use Hc
(c/s/C/S). */
-static void
-remote_resume_with_hc (struct target_ops *ops,
- ptid_t ptid, int step, enum gdb_signal siggnal)
+void
+remote_target::remote_resume_with_hc (ptid_t ptid, int step,
+ gdb_signal siggnal)
{
struct remote_state *rs = get_remote_state ();
- struct thread_info *thread;
char *buf;
rs->last_sent_signal = siggnal;
/* The c/s/C/S resume packets use Hc, so set the continue
thread. */
- if (ptid_equal (ptid, minus_one_ptid))
+ if (ptid == minus_one_ptid)
set_continue_thread (any_thread_ptid);
else
set_continue_thread (ptid);
- ALL_NON_EXITED_THREADS (thread)
+ for (thread_info *thread : all_non_exited_threads ())
resume_clear_thread_private_info (thread);
- buf = rs->buf;
- if (execution_direction == EXEC_REVERSE)
+ buf = rs->buf.data ();
+ if (::execution_direction == EXEC_REVERSE)
{
/* We don't pass signals to the target in reverse exec mode. */
if (info_verbose && siggnal != GDB_SIGNAL_0)
This function issues a strict subset of all possible vCont commands
at the moment. */
-static int
-remote_resume_with_vcont (ptid_t ptid, int step, enum gdb_signal siggnal)
+int
+remote_target::remote_resume_with_vcont (ptid_t ptid, int step,
+ enum gdb_signal siggnal)
{
struct remote_state *rs = get_remote_state ();
char *p;
char *endp;
/* No reverse execution actions defined for vCont. */
- if (execution_direction == EXEC_REVERSE)
+ if (::execution_direction == EXEC_REVERSE)
return 0;
if (packet_support (PACKET_vCont) == PACKET_SUPPORT_UNKNOWN)
- remote_vcont_probe (rs);
+ remote_vcont_probe ();
if (packet_support (PACKET_vCont) == PACKET_DISABLE)
return 0;
- p = rs->buf;
- endp = rs->buf + get_remote_packet_size ();
+ p = rs->buf.data ();
+ endp = p + get_remote_packet_size ();
/* If we could generate a wider range of packets, we'd have to worry
about overflowing BUF. Should there be a generic
p += xsnprintf (p, endp - p, "vCont");
- if (ptid_equal (ptid, magic_null_ptid))
+ if (ptid == magic_null_ptid)
{
/* MAGIC_NULL_PTID means that we don't have any active threads,
so we don't have any TID numbers the inferior will
a TID. */
append_resumption (p, endp, minus_one_ptid, step, siggnal);
}
- else if (ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid))
+ else if (ptid == minus_one_ptid || ptid.is_pid ())
{
/* Resume all threads (of all processes, or of a single
process), with preference for INFERIOR_PTID. This assumes
append_resumption (p, endp, ptid, step, siggnal);
}
- gdb_assert (strlen (rs->buf) < get_remote_packet_size ());
+ gdb_assert (strlen (rs->buf.data ()) < get_remote_packet_size ());
putpkt (rs->buf);
if (target_is_non_stop_p ())
/* In non-stop, the stub replies to vCont with "OK". The stop
reply will be reported asynchronously by means of a `%Stop'
notification. */
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Unexpected vCont reply in non-stop mode: %s"), rs->buf);
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Unexpected vCont reply in non-stop mode: %s"),
+ rs->buf.data ());
}
return 1;
{
remote_thread_info *remote_thr;
- if (ptid_equal (minus_one_ptid, ptid) || ptid_is_pid (ptid))
+ if (minus_one_ptid == ptid || ptid.is_pid ())
remote_thr = get_remote_thread_info (inferior_ptid);
else
remote_thr = get_remote_thread_info (ptid);
/* Prefer vCont, and fallback to s/c/S/C, which use Hc. */
if (!remote_resume_with_vcont (ptid, step, siggnal))
- remote_resume_with_hc (this, ptid, step, siggnal);
+ remote_resume_with_hc (ptid, step, siggnal);
/* We are about to start executing the inferior, let's register it
with the event loop. NOTE: this is the one place where all the
rs->waiting_for_stop_reply = 1;
}
-static void check_pending_events_prevent_wildcard_vcont
- (int *may_global_wildcard_vcont);
static int is_pending_fork_parent_thread (struct thread_info *thread);
/* Private per-inferior info for target remote processes. */
return static_cast<remote_inferior *> (inf->priv.get ());
}
-/* Structure used to track the construction of a vCont packet in the
+/* Class used to track the construction of a vCont packet in the
outgoing packet buffer. This is used to send multiple vCont
packets if we have more actions than would fit a single packet. */
-struct vcont_builder
+class vcont_builder
{
+public:
+ explicit vcont_builder (remote_target *remote)
+ : m_remote (remote)
+ {
+ restart ();
+ }
+
+ void flush ();
+ void push_action (ptid_t ptid, bool step, gdb_signal siggnal);
+
+private:
+ void restart ();
+
+ /* The remote target. */
+ remote_target *m_remote;
+
/* Pointer to the first action. P points here if no action has been
appended yet. */
- char *first_action;
+ char *m_first_action;
/* Where the next action will be appended. */
- char *p;
+ char *m_p;
/* The end of the buffer. Must never write past this. */
- char *endp;
+ char *m_endp;
};
/* Prepare the outgoing buffer for a new vCont packet. */
-static void
-vcont_builder_restart (struct vcont_builder *builder)
+void
+vcont_builder::restart ()
{
- struct remote_state *rs = get_remote_state ();
+ struct remote_state *rs = m_remote->get_remote_state ();
- builder->p = rs->buf;
- builder->endp = rs->buf + get_remote_packet_size ();
- builder->p += xsnprintf (builder->p, builder->endp - builder->p, "vCont");
- builder->first_action = builder->p;
+ m_p = rs->buf.data ();
+ m_endp = m_p + m_remote->get_remote_packet_size ();
+ m_p += xsnprintf (m_p, m_endp - m_p, "vCont");
+ m_first_action = m_p;
}
/* If the vCont packet being built has any action, send it to the
remote end. */
-static void
-vcont_builder_flush (struct vcont_builder *builder)
+void
+vcont_builder::flush ()
{
struct remote_state *rs;
- if (builder->p == builder->first_action)
+ if (m_p == m_first_action)
return;
- rs = get_remote_state ();
- putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Unexpected vCont reply in non-stop mode: %s"), rs->buf);
+ rs = m_remote->get_remote_state ();
+ m_remote->putpkt (rs->buf);
+ m_remote->getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Unexpected vCont reply in non-stop mode: %s"), rs->buf.data ());
}
/* The largest action is range-stepping, with its two addresses. This
what we've got so far to the remote end and start over a new vCont
packet (with the new action). */
-static void
-vcont_builder_push_action (struct vcont_builder *builder,
- ptid_t ptid, int step, enum gdb_signal siggnal)
+void
+vcont_builder::push_action (ptid_t ptid, bool step, gdb_signal siggnal)
{
char buf[MAX_ACTION_SIZE + 1];
- char *endp;
- size_t rsize;
- endp = append_resumption (buf, buf + sizeof (buf),
- ptid, step, siggnal);
+ char *endp = m_remote->append_resumption (buf, buf + sizeof (buf),
+ ptid, step, siggnal);
/* Check whether this new action would fit in the vCont packet along
with previous actions. If not, send what we've got so far and
start a new vCont packet. */
- rsize = endp - buf;
- if (rsize > builder->endp - builder->p)
+ size_t rsize = endp - buf;
+ if (rsize > m_endp - m_p)
{
- vcont_builder_flush (builder);
- vcont_builder_restart (builder);
+ flush ();
+ restart ();
/* Should now fit. */
- gdb_assert (rsize <= builder->endp - builder->p);
+ gdb_assert (rsize <= m_endp - m_p);
}
- memcpy (builder->p, buf, rsize);
- builder->p += rsize;
- *builder->p = '\0';
+ memcpy (m_p, buf, rsize);
+ m_p += rsize;
+ *m_p = '\0';
}
/* to_commit_resume implementation. */
void
remote_target::commit_resume ()
{
- struct inferior *inf;
- struct thread_info *tp;
int any_process_wildcard;
int may_global_wildcard_vcont;
- struct vcont_builder vcont_builder;
/* If connected in all-stop mode, we'd send the remote resume
request directly from remote_resume. Likewise if
may_global_wildcard_vcont = 1;
/* And assume every process is individually wildcard-able too. */
- ALL_NON_EXITED_INFERIORS (inf)
+ for (inferior *inf : all_non_exited_inferiors ())
{
remote_inferior *priv = get_remote_inferior (inf);
disable process and global wildcard resumes appropriately. */
check_pending_events_prevent_wildcard_vcont (&may_global_wildcard_vcont);
- ALL_NON_EXITED_THREADS (tp)
+ for (thread_info *tp : all_non_exited_threads ())
{
/* If a thread of a process is not meant to be resumed, then we
can't wildcard that process. */
we end up with too many actions for a single packet vcont_builder
flushes the current vCont packet to the remote side and starts a
new one. */
- vcont_builder_restart (&vcont_builder);
+ struct vcont_builder vcont_builder (this);
/* Threads first. */
- ALL_NON_EXITED_THREADS (tp)
+ for (thread_info *tp : all_non_exited_threads ())
{
remote_thread_info *remote_thr = get_remote_thread_info (tp);
continue;
}
- vcont_builder_push_action (&vcont_builder, tp->ptid,
+ vcont_builder.push_action (tp->ptid,
remote_thr->last_resume_step,
remote_thr->last_resume_sig);
remote_thr->vcont_resumed = 1;
supposed to be resumed. */
any_process_wildcard = 0;
- ALL_NON_EXITED_INFERIORS (inf)
+ for (inferior *inf : all_non_exited_inferiors ())
{
if (get_remote_inferior (inf)->may_wildcard_vcont)
{
continue action for each running process, if any. */
if (may_global_wildcard_vcont)
{
- vcont_builder_push_action (&vcont_builder, minus_one_ptid,
- 0, GDB_SIGNAL_0);
+ vcont_builder.push_action (minus_one_ptid,
+ false, GDB_SIGNAL_0);
}
else
{
- ALL_NON_EXITED_INFERIORS (inf)
+ for (inferior *inf : all_non_exited_inferiors ())
{
if (get_remote_inferior (inf)->may_wildcard_vcont)
{
- vcont_builder_push_action (&vcont_builder,
- pid_to_ptid (inf->pid),
- 0, GDB_SIGNAL_0);
+ vcont_builder.push_action (ptid_t (inf->pid),
+ false, GDB_SIGNAL_0);
}
}
}
}
- vcont_builder_flush (&vcont_builder);
+ vcont_builder.flush ();
}
\f
thread, all threads of a remote process, or all threads of all
processes. */
-static void
-remote_stop_ns (ptid_t ptid)
+void
+remote_target::remote_stop_ns (ptid_t ptid)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- char *endp = rs->buf + get_remote_packet_size ();
+ char *p = rs->buf.data ();
+ char *endp = p + get_remote_packet_size ();
if (packet_support (PACKET_vCont) == PACKET_SUPPORT_UNKNOWN)
- remote_vcont_probe (rs);
+ remote_vcont_probe ();
if (!rs->supports_vCont.t)
error (_("Remote server does not support stopping threads"));
- if (ptid_equal (ptid, minus_one_ptid)
- || (!remote_multi_process_p (rs) && ptid_is_pid (ptid)))
+ if (ptid == minus_one_ptid
+ || (!remote_multi_process_p (rs) && ptid.is_pid ()))
p += xsnprintf (p, endp - p, "vCont;t");
else
{
p += xsnprintf (p, endp - p, "vCont;t:");
- if (ptid_is_pid (ptid))
+ if (ptid.is_pid ())
/* All (-1) threads of process. */
- nptid = ptid_build (ptid_get_pid (ptid), -1, 0);
+ nptid = ptid_t (ptid.pid (), -1, 0);
else
{
/* Small optimization: if we already have a stop reply for
/* In non-stop, we get an immediate OK reply. The stop reply will
come in asynchronously by notification. */
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Stopping %s failed: %s"), target_pid_to_str (ptid), rs->buf);
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Stopping %s failed: %s"), target_pid_to_str (ptid).c_str (),
+ rs->buf.data ());
}
/* All-stop version of target_interrupt. Sends a break or a ^C to
interrupt the remote target. It is undefined which thread of which
process reports the interrupt. */
-static void
-remote_interrupt_as (void)
+void
+remote_target::remote_interrupt_as ()
{
struct remote_state *rs = get_remote_state ();
reports the interrupt. Throws an error if the packet is not
supported by the server. */
-static void
-remote_interrupt_ns (void)
+void
+remote_target::remote_interrupt_ns ()
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- char *endp = rs->buf + get_remote_packet_size ();
+ char *p = rs->buf.data ();
+ char *endp = p + get_remote_packet_size ();
xsnprintf (p, endp - p, "vCtrlC");
/* In non-stop, we get an immediate OK reply. The stop reply will
come in asynchronously by notification. */
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_vCtrlC]))
{
case PACKET_UNKNOWN:
error (_("No support for interrupting the remote target."));
case PACKET_ERROR:
- error (_("Interrupting target failed: %s"), rs->buf);
+ error (_("Interrupting target failed: %s"), rs->buf.data ());
}
}
/* Ask the user what to do when an interrupt is received. */
-static void
-interrupt_query (void)
+void
+remote_target::interrupt_query ()
{
struct remote_state *rs = get_remote_state ();
}
static void
-remote_console_output (char *msg)
+remote_console_output (const char *msg)
{
- char *p;
+ const char *p;
for (p = msg; p[0] && p[1]; p += 2)
{
gdb_flush (gdb_stdtarg);
}
-DEF_VEC_O(cached_reg_t);
-
-typedef struct stop_reply
+struct stop_reply : public notif_event
{
- struct notif_event base;
+ ~stop_reply ();
/* The identifier of the thread about this event */
ptid_t ptid;
efficient for those targets that provide critical registers as
part of their normal status mechanism (as another roundtrip to
fetch them is avoided). */
- VEC(cached_reg_t) *regcache;
+ std::vector<cached_reg_t> regcache;
enum target_stop_reason stop_reason;
CORE_ADDR watch_data_address;
int core;
-} *stop_reply_p;
-
-DECLARE_QUEUE_P (stop_reply_p);
-DEFINE_QUEUE_P (stop_reply_p);
-/* The list of already fetched and acknowledged stop events. This
- queue is used for notification Stop, and other notifications
- don't need queue for their events, because the notification events
- of Stop can't be consumed immediately, so that events should be
- queued first, and be consumed by remote_wait_{ns,as} one per
- time. Other notifications can consume their events immediately,
- so queue is not needed for them. */
-static QUEUE (stop_reply_p) *stop_reply_queue;
-
-static void
-stop_reply_xfree (struct stop_reply *r)
-{
- notif_event_xfree ((struct notif_event *) r);
-}
+};
/* Return the length of the stop reply queue. */
-static int
-stop_reply_queue_length (void)
+int
+remote_target::stop_reply_queue_length ()
{
- return QUEUE_length (stop_reply_p, stop_reply_queue);
+ remote_state *rs = get_remote_state ();
+ return rs->stop_reply_queue.size ();
}
-static void
-remote_notif_stop_parse (struct notif_client *self, char *buf,
+void
+remote_notif_stop_parse (remote_target *remote,
+ struct notif_client *self, const char *buf,
struct notif_event *event)
{
- remote_parse_stop_reply (buf, (struct stop_reply *) event);
+ remote->remote_parse_stop_reply (buf, (struct stop_reply *) event);
}
static void
-remote_notif_stop_ack (struct notif_client *self, char *buf,
+remote_notif_stop_ack (remote_target *remote,
+ struct notif_client *self, const char *buf,
struct notif_event *event)
{
struct stop_reply *stop_reply = (struct stop_reply *) event;
/* acknowledge */
- putpkt (self->ack_command);
+ putpkt (remote, self->ack_command);
if (stop_reply->ws.kind == TARGET_WAITKIND_IGNORE)
+ {
/* We got an unknown stop reply. */
error (_("Unknown stop reply"));
+ }
- push_stop_reply (stop_reply);
+ remote->push_stop_reply (stop_reply);
}
static int
-remote_notif_stop_can_get_pending_events (struct notif_client *self)
+remote_notif_stop_can_get_pending_events (remote_target *remote,
+ struct notif_client *self)
{
/* We can't get pending events in remote_notif_process for
notification stop, and we have to do this in remote_wait_ns
instead. If we fetch all queued events from stub, remote stub
may exit and we have no chance to process them back in
remote_wait_ns. */
- mark_async_event_handler (remote_async_inferior_event_token);
+ remote_state *rs = remote->get_remote_state ();
+ mark_async_event_handler (rs->remote_async_inferior_event_token);
return 0;
}
-static void
-stop_reply_dtr (struct notif_event *event)
+stop_reply::~stop_reply ()
{
- struct stop_reply *r = (struct stop_reply *) event;
- cached_reg_t *reg;
- int ix;
-
- for (ix = 0;
- VEC_iterate (cached_reg_t, r->regcache, ix, reg);
- ix++)
- xfree (reg->data);
-
- VEC_free (cached_reg_t, r->regcache);
+ for (cached_reg_t ® : regcache)
+ xfree (reg.data);
}
-static struct notif_event *
-remote_notif_stop_alloc_reply (void)
+static notif_event_up
+remote_notif_stop_alloc_reply ()
{
- /* We cast to a pointer to the "base class". */
- struct notif_event *r = (struct notif_event *) XNEW (struct stop_reply);
-
- r->dtr = stop_reply_dtr;
-
- return r;
+ return notif_event_up (new struct stop_reply ());
}
/* A client of notification Stop. */
REMOTE_NOTIF_STOP,
};
-/* A parameter to pass data in and out. */
-
-struct queue_iter_param
-{
- void *input;
- struct stop_reply *output;
-};
-
/* Determine if THREAD_PTID is a pending fork parent thread. ARG contains
the pid of the process that owns the threads we want to check, or
-1 if we want to check all threads. */
if (ws->kind == TARGET_WAITKIND_FORKED
|| ws->kind == TARGET_WAITKIND_VFORKED)
{
- if (event_pid == -1 || event_pid == ptid_get_pid (thread_ptid))
+ if (event_pid == -1 || event_pid == thread_ptid.pid ())
return 1;
}
return is_pending_fork_parent (ws, pid, thread->ptid);
}
-/* Check whether EVENT is a fork event, and if it is, remove the
- fork child from the context list passed in DATA. */
-
-static int
-remove_child_of_pending_fork (QUEUE (stop_reply_p) *q,
- QUEUE_ITER (stop_reply_p) *iter,
- stop_reply_p event,
- void *data)
-{
- struct queue_iter_param *param = (struct queue_iter_param *) data;
- struct threads_listing_context *context
- = (struct threads_listing_context *) param->input;
-
- if (event->ws.kind == TARGET_WAITKIND_FORKED
- || event->ws.kind == TARGET_WAITKIND_VFORKED
- || event->ws.kind == TARGET_WAITKIND_THREAD_EXITED)
- context->remove_thread (event->ws.value.related_pid);
-
- return 1;
-}
-
/* If CONTEXT contains any fork child threads that have not been
reported yet, remove them from the CONTEXT list. If such a
thread exists it is because we are stopped at a fork catchpoint
and have not yet called follow_fork, which will set up the
host-side data structures for the new process. */
-static void
-remove_new_fork_children (struct threads_listing_context *context)
+void
+remote_target::remove_new_fork_children (threads_listing_context *context)
{
- struct thread_info * thread;
int pid = -1;
struct notif_client *notif = ¬if_client_stop;
- struct queue_iter_param param;
/* For any threads stopped at a fork event, remove the corresponding
fork child threads from the CONTEXT list. */
- ALL_NON_EXITED_THREADS (thread)
+ for (thread_info *thread : all_non_exited_threads ())
{
struct target_waitstatus *ws = thread_pending_fork_status (thread);
in process PID and remove those fork child threads from the
CONTEXT list as well. */
remote_notif_get_pending_events (notif);
- param.input = context;
- param.output = NULL;
- QUEUE_iterate (stop_reply_p, stop_reply_queue,
- remove_child_of_pending_fork, ¶m);
-}
-
-/* Check whether EVENT would prevent a global or process wildcard
- vCont action. */
-
-static int
-check_pending_event_prevents_wildcard_vcont_callback
- (QUEUE (stop_reply_p) *q,
- QUEUE_ITER (stop_reply_p) *iter,
- stop_reply_p event,
- void *data)
-{
- struct inferior *inf;
- int *may_global_wildcard_vcont = (int *) data;
-
- if (event->ws.kind == TARGET_WAITKIND_NO_RESUMED
- || event->ws.kind == TARGET_WAITKIND_NO_HISTORY)
- return 1;
-
- if (event->ws.kind == TARGET_WAITKIND_FORKED
- || event->ws.kind == TARGET_WAITKIND_VFORKED)
- *may_global_wildcard_vcont = 0;
-
- inf = find_inferior_ptid (event->ptid);
-
- /* This may be the first time we heard about this process.
- Regardless, we must not do a global wildcard resume, otherwise
- we'd resume this process too. */
- *may_global_wildcard_vcont = 0;
- if (inf != NULL)
- get_remote_inferior (inf)->may_wildcard_vcont = false;
-
- return 1;
+ for (auto &event : get_remote_state ()->stop_reply_queue)
+ if (event->ws.kind == TARGET_WAITKIND_FORKED
+ || event->ws.kind == TARGET_WAITKIND_VFORKED
+ || event->ws.kind == TARGET_WAITKIND_THREAD_EXITED)
+ context->remove_thread (event->ws.value.related_pid);
}
/* Check whether any event pending in the vStopped queue would prevent
and clear the event inferior's may_wildcard_vcont flag if we can't
do a process-wide wildcard resume (vCont;c:pPID.-1). */
-static void
-check_pending_events_prevent_wildcard_vcont (int *may_global_wildcard)
+void
+remote_target::check_pending_events_prevent_wildcard_vcont
+ (int *may_global_wildcard)
{
struct notif_client *notif = ¬if_client_stop;
remote_notif_get_pending_events (notif);
- QUEUE_iterate (stop_reply_p, stop_reply_queue,
- check_pending_event_prevents_wildcard_vcont_callback,
- may_global_wildcard);
-}
+ for (auto &event : get_remote_state ()->stop_reply_queue)
+ {
+ if (event->ws.kind == TARGET_WAITKIND_NO_RESUMED
+ || event->ws.kind == TARGET_WAITKIND_NO_HISTORY)
+ continue;
-/* Remove stop replies in the queue if its pid is equal to the given
- inferior's pid. */
+ if (event->ws.kind == TARGET_WAITKIND_FORKED
+ || event->ws.kind == TARGET_WAITKIND_VFORKED)
+ *may_global_wildcard = 0;
-static int
-remove_stop_reply_for_inferior (QUEUE (stop_reply_p) *q,
- QUEUE_ITER (stop_reply_p) *iter,
- stop_reply_p event,
- void *data)
-{
- struct queue_iter_param *param = (struct queue_iter_param *) data;
- struct inferior *inf = (struct inferior *) param->input;
+ struct inferior *inf = find_inferior_ptid (event->ptid);
- if (ptid_get_pid (event->ptid) == inf->pid)
- {
- stop_reply_xfree (event);
- QUEUE_remove_elem (stop_reply_p, q, iter);
+ /* This may be the first time we heard about this process.
+ Regardless, we must not do a global wildcard resume, otherwise
+ we'd resume this process too. */
+ *may_global_wildcard = 0;
+ if (inf != NULL)
+ get_remote_inferior (inf)->may_wildcard_vcont = false;
}
-
- return 1;
}
/* Discard all pending stop replies of inferior INF. */
-static void
-discard_pending_stop_replies (struct inferior *inf)
+void
+remote_target::discard_pending_stop_replies (struct inferior *inf)
{
- struct queue_iter_param param;
struct stop_reply *reply;
struct remote_state *rs = get_remote_state ();
struct remote_notif_state *rns = rs->notif_state;
reply = (struct stop_reply *) rns->pending_event[notif_client_stop.id];
/* Discard the in-flight notification. */
- if (reply != NULL && ptid_get_pid (reply->ptid) == inf->pid)
+ if (reply != NULL && reply->ptid.pid () == inf->pid)
{
- stop_reply_xfree (reply);
+ delete reply;
rns->pending_event[notif_client_stop.id] = NULL;
}
- param.input = inf;
- param.output = NULL;
/* Discard the stop replies we have already pulled with
vStopped. */
- QUEUE_iterate (stop_reply_p, stop_reply_queue,
- remove_stop_reply_for_inferior, ¶m);
-}
-
-/* If its remote state is equal to the given remote state,
- remove EVENT from the stop reply queue. */
-
-static int
-remove_stop_reply_of_remote_state (QUEUE (stop_reply_p) *q,
- QUEUE_ITER (stop_reply_p) *iter,
- stop_reply_p event,
- void *data)
-{
- struct queue_iter_param *param = (struct queue_iter_param *) data;
- struct remote_state *rs = (struct remote_state *) param->input;
-
- if (event->rs == rs)
- {
- stop_reply_xfree (event);
- QUEUE_remove_elem (stop_reply_p, q, iter);
- }
-
- return 1;
+ auto iter = std::remove_if (rs->stop_reply_queue.begin (),
+ rs->stop_reply_queue.end (),
+ [=] (const stop_reply_up &event)
+ {
+ return event->ptid.pid () == inf->pid;
+ });
+ rs->stop_reply_queue.erase (iter, rs->stop_reply_queue.end ());
}
/* Discard the stop replies for RS in stop_reply_queue. */
-static void
-discard_pending_stop_replies_in_queue (struct remote_state *rs)
+void
+remote_target::discard_pending_stop_replies_in_queue ()
{
- struct queue_iter_param param;
+ remote_state *rs = get_remote_state ();
- param.input = rs;
- param.output = NULL;
/* Discard the stop replies we have already pulled with
vStopped. */
- QUEUE_iterate (stop_reply_p, stop_reply_queue,
- remove_stop_reply_of_remote_state, ¶m);
-}
-
-/* A parameter to pass data in and out. */
-
-static int
-remote_notif_remove_once_on_match (QUEUE (stop_reply_p) *q,
- QUEUE_ITER (stop_reply_p) *iter,
- stop_reply_p event,
- void *data)
-{
- struct queue_iter_param *param = (struct queue_iter_param *) data;
- ptid_t *ptid = (ptid_t *) param->input;
-
- if (ptid_match (event->ptid, *ptid))
- {
- param->output = event;
- QUEUE_remove_elem (stop_reply_p, q, iter);
- return 0;
- }
-
- return 1;
+ auto iter = std::remove_if (rs->stop_reply_queue.begin (),
+ rs->stop_reply_queue.end (),
+ [=] (const stop_reply_up &event)
+ {
+ return event->rs == rs;
+ });
+ rs->stop_reply_queue.erase (iter, rs->stop_reply_queue.end ());
}
/* Remove the first reply in 'stop_reply_queue' which matches
PTID. */
-static struct stop_reply *
-remote_notif_remove_queued_reply (ptid_t ptid)
+struct stop_reply *
+remote_target::remote_notif_remove_queued_reply (ptid_t ptid)
{
- struct queue_iter_param param;
+ remote_state *rs = get_remote_state ();
- param.input = &ptid;
- param.output = NULL;
+ auto iter = std::find_if (rs->stop_reply_queue.begin (),
+ rs->stop_reply_queue.end (),
+ [=] (const stop_reply_up &event)
+ {
+ return event->ptid.matches (ptid);
+ });
+ struct stop_reply *result;
+ if (iter == rs->stop_reply_queue.end ())
+ result = nullptr;
+ else
+ {
+ result = iter->release ();
+ rs->stop_reply_queue.erase (iter);
+ }
- QUEUE_iterate (stop_reply_p, stop_reply_queue,
- remote_notif_remove_once_on_match, ¶m);
if (notif_debug)
fprintf_unfiltered (gdb_stdlog,
"notif: discard queued event: 'Stop' in %s\n",
- target_pid_to_str (ptid));
+ target_pid_to_str (ptid).c_str ());
- return param.output;
+ return result;
}
/* Look for a queued stop reply belonging to PTID. If one is found,
found. If there are still queued events left to process, tell the
event loop to get back to target_wait soon. */
-static struct stop_reply *
-queued_stop_reply (ptid_t ptid)
+struct stop_reply *
+remote_target::queued_stop_reply (ptid_t ptid)
{
+ remote_state *rs = get_remote_state ();
struct stop_reply *r = remote_notif_remove_queued_reply (ptid);
- if (!QUEUE_is_empty (stop_reply_p, stop_reply_queue))
- /* There's still at least an event left. */
- mark_async_event_handler (remote_async_inferior_event_token);
+ if (!rs->stop_reply_queue.empty ())
+ {
+ /* There's still at least an event left. */
+ mark_async_event_handler (rs->remote_async_inferior_event_token);
+ }
return r;
}
know that we now have at least one queued event left to pass to the
core side, tell the event loop to get back to target_wait soon. */
-static void
-push_stop_reply (struct stop_reply *new_event)
+void
+remote_target::push_stop_reply (struct stop_reply *new_event)
{
- QUEUE_enque (stop_reply_p, stop_reply_queue, new_event);
+ remote_state *rs = get_remote_state ();
+ rs->stop_reply_queue.push_back (stop_reply_up (new_event));
if (notif_debug)
fprintf_unfiltered (gdb_stdlog,
"notif: push 'Stop' %s to queue %d\n",
- target_pid_to_str (new_event->ptid),
- QUEUE_length (stop_reply_p,
- stop_reply_queue));
-
- mark_async_event_handler (remote_async_inferior_event_token);
-}
+ target_pid_to_str (new_event->ptid).c_str (),
+ int (rs->stop_reply_queue.size ()));
-static int
-stop_reply_match_ptid_and_ws (QUEUE (stop_reply_p) *q,
- QUEUE_ITER (stop_reply_p) *iter,
- struct stop_reply *event,
- void *data)
-{
- ptid_t *ptid = (ptid_t *) data;
-
- return !(ptid_equal (*ptid, event->ptid)
- && event->ws.kind == TARGET_WAITKIND_STOPPED);
+ mark_async_event_handler (rs->remote_async_inferior_event_token);
}
/* Returns true if we have a stop reply for PTID. */
-static int
-peek_stop_reply (ptid_t ptid)
+int
+remote_target::peek_stop_reply (ptid_t ptid)
{
- return !QUEUE_iterate (stop_reply_p, stop_reply_queue,
- stop_reply_match_ptid_and_ws, &ptid);
+ remote_state *rs = get_remote_state ();
+ for (auto &event : rs->stop_reply_queue)
+ if (ptid == event->ptid
+ && event->ws.kind == TARGET_WAITKIND_STOPPED)
+ return 1;
+ return 0;
}
/* Helper for remote_parse_stop_reply. Return nonzero if the substring
/* Parse the stop reply in BUF. Either the function succeeds, and the
result is stored in EVENT, or throws an error. */
-static void
-remote_parse_stop_reply (char *buf, struct stop_reply *event)
+void
+remote_target::remote_parse_stop_reply (const char *buf, stop_reply *event)
{
remote_arch_state *rsa = NULL;
ULONGEST addr;
event->ws.kind = TARGET_WAITKIND_IGNORE;
event->ws.value.integer = 0;
event->stop_reason = TARGET_STOPPED_BY_NO_REASON;
- event->regcache = NULL;
+ event->regcache.clear ();
event->core = -1;
switch (buf[0])
else if (strprefix (p, p1, "exec"))
{
ULONGEST ignored;
- char pathname[PATH_MAX];
int pathlen;
/* Determine the length of the execd pathname. */
/* Save the pathname for event reporting and for
the next run command. */
- hex2bin (p1, (gdb_byte *) pathname, pathlen);
+ gdb::unique_xmalloc_ptr<char[]> pathname
+ ((char *) xmalloc (pathlen + 1));
+ hex2bin (p1, (gdb_byte *) pathname.get (), pathlen);
pathname[pathlen] = '\0';
/* This is freed during event handling. */
- event->ws.value.execd_pathname = xstrdup (pathname);
+ event->ws.value.execd_pathname = pathname.release ();
event->ws.kind = TARGET_WAITKIND_EXECD;
/* Skip the registers included in this packet, since
}
event->arch = inf->gdbarch;
- rsa = get_remote_arch_state (event->arch);
+ rsa = event->rs->get_remote_arch_state (event->arch);
}
packet_reg *reg
if (fieldsize < register_size (event->arch, reg->regnum))
warning (_("Remote reply is too short: %s"), buf);
- VEC_safe_push (cached_reg_t, event->regcache, &cached_reg);
+ event->regcache.push_back (cached_reg);
}
else
{
break;
case 'w': /* Thread exited. */
{
- const char *p;
ULONGEST value;
event->ws.kind = TARGET_WAITKIND_THREAD_EXITED;
case 'W': /* Target exited. */
case 'X':
{
- const char *p;
int pid;
ULONGEST value;
}
/* If no process is specified, assume inferior_ptid. */
- pid = ptid_get_pid (inferior_ptid);
+ pid = inferior_ptid.pid ();
if (*p == '\0')
;
else if (*p == ';')
}
else
error (_("unknown stop reply packet: %s"), buf);
- event->ptid = pid_to_ptid (pid);
+ event->ptid = ptid_t (pid);
}
break;
case 'N':
break;
}
- if (target_is_non_stop_p () && ptid_equal (event->ptid, null_ptid))
+ if (target_is_non_stop_p () && event->ptid == null_ptid)
error (_("No process or thread specified in stop reply: %s"), buf);
}
<GDB marks the REMOTE_ASYNC_GET_PENDING_EVENTS_TOKEN>
2.5) <-- (registers reply to step #2.3)
- Eventualy after step #2.5, we return to the event loop, which
+ Eventually after step #2.5, we return to the event loop, which
notices there's an event on the
REMOTE_ASYNC_GET_PENDING_EVENTS_TOKEN event and calls the
associated callback --- the function below. At this point, we're
*/
void
-remote_notif_get_pending_events (struct notif_client *nc)
+remote_target::remote_notif_get_pending_events (notif_client *nc)
{
struct remote_state *rs = get_remote_state ();
nc->name);
/* acknowledge */
- nc->ack (nc, rs->buf, rs->notif_state->pending_event[nc->id]);
+ nc->ack (this, nc, rs->buf.data (),
+ rs->notif_state->pending_event[nc->id]);
rs->notif_state->pending_event[nc->id] = NULL;
while (1)
{
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") == 0)
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") == 0)
break;
else
- remote_notif_ack (nc, rs->buf);
+ remote_notif_ack (this, nc, rs->buf.data ());
}
}
else
}
}
+/* Wrapper around remote_target::remote_notif_get_pending_events to
+ avoid having to export the whole remote_target class. */
+
+void
+remote_notif_get_pending_events (remote_target *remote, notif_client *nc)
+{
+ remote->remote_notif_get_pending_events (nc);
+}
+
/* Called when it is decided that STOP_REPLY holds the info of the
event that is to be returned to the core. This function always
destroys STOP_REPLY. */
-static ptid_t
-process_stop_reply (struct stop_reply *stop_reply,
- struct target_waitstatus *status)
+ptid_t
+remote_target::process_stop_reply (struct stop_reply *stop_reply,
+ struct target_waitstatus *status)
{
ptid_t ptid;
/* If no thread/process was reported by the stub, assume the current
inferior. */
- if (ptid_equal (ptid, null_ptid))
+ if (ptid == null_ptid)
ptid = inferior_ptid;
if (status->kind != TARGET_WAITKIND_EXITED
&& status->kind != TARGET_WAITKIND_NO_RESUMED)
{
/* Expedited registers. */
- if (stop_reply->regcache)
+ if (!stop_reply->regcache.empty ())
{
struct regcache *regcache
= get_thread_arch_regcache (ptid, stop_reply->arch);
- cached_reg_t *reg;
- int ix;
- for (ix = 0;
- VEC_iterate (cached_reg_t, stop_reply->regcache, ix, reg);
- ix++)
- {
- regcache_raw_supply (regcache, reg->num, reg->data);
- xfree (reg->data);
- }
+ for (cached_reg_t ® : stop_reply->regcache)
+ {
+ regcache->raw_supply (reg.num, reg.data);
+ xfree (reg.data);
+ }
- VEC_free (cached_reg_t, stop_reply->regcache);
+ stop_reply->regcache.clear ();
}
remote_notice_new_inferior (ptid, 0);
remote_thr->vcont_resumed = 0;
}
- stop_reply_xfree (stop_reply);
+ delete stop_reply;
return ptid;
}
/* The non-stop mode version of target_wait. */
-static ptid_t
-remote_wait_ns (ptid_t ptid, struct target_waitstatus *status, int options)
+ptid_t
+remote_target::wait_ns (ptid_t ptid, struct target_waitstatus *status, int options)
{
struct remote_state *rs = get_remote_state ();
struct stop_reply *stop_reply;
/* If in non-stop mode, get out of getpkt even if a
notification is received. */
- ret = getpkt_or_notif_sane (&rs->buf, &rs->buf_size,
- 0 /* forever */, &is_notif);
+ ret = getpkt_or_notif_sane (&rs->buf, 0 /* forever */, &is_notif);
while (1)
{
if (ret != -1 && !is_notif)
/* We're out of sync with the target now. Did it continue
or not? We can't tell which thread it was in non-stop,
so just ignore this. */
- warning (_("Remote failure reply: %s"), rs->buf);
+ warning (_("Remote failure reply: %s"), rs->buf.data ());
break;
case 'O': /* Console output. */
- remote_console_output (rs->buf + 1);
+ remote_console_output (&rs->buf[1]);
break;
default:
- warning (_("Invalid remote reply: %s"), rs->buf);
+ warning (_("Invalid remote reply: %s"), rs->buf.data ());
break;
}
}
/* Otherwise do a blocking wait. */
- ret = getpkt_or_notif_sane (&rs->buf, &rs->buf_size,
- 1 /* forever */, &is_notif);
+ ret = getpkt_or_notif_sane (&rs->buf, 1 /* forever */, &is_notif);
}
}
/* Wait until the remote machine stops, then return, storing status in
STATUS just as `wait' would. */
-static ptid_t
-remote_wait_as (ptid_t ptid, struct target_waitstatus *status, int options)
+ptid_t
+remote_target::wait_as (ptid_t ptid, target_waitstatus *status, int options)
{
struct remote_state *rs = get_remote_state ();
ptid_t event_ptid = null_ptid;
int ret;
int is_notif;
int forever = ((options & TARGET_WNOHANG) == 0
- && wait_forever_enabled_p);
+ && rs->wait_forever_enabled_p);
if (!rs->waiting_for_stop_reply)
{
_never_ wait for ever -> test on target_is_async_p().
However, before we do that we need to ensure that the caller
knows how to take the target into/out of async mode. */
- ret = getpkt_or_notif_sane (&rs->buf, &rs->buf_size,
- forever, &is_notif);
+ ret = getpkt_or_notif_sane (&rs->buf, forever, &is_notif);
/* GDB gets a notification. Return to core as this event is
not interesting. */
return minus_one_ptid;
}
- buf = rs->buf;
+ buf = rs->buf.data ();
/* Assume that the target has acknowledged Ctrl-C unless we receive
an 'F' or 'O' packet. */
for a stop reply. See the comments in putpkt_binary. Set
waiting_for_stop_reply to 0 temporarily. */
rs->waiting_for_stop_reply = 0;
- remote_fileio_request (buf, rs->ctrlc_pending_p);
+ remote_fileio_request (this, buf, rs->ctrlc_pending_p);
rs->ctrlc_pending_p = 0;
/* GDB handled the File-I/O request, and the target is running
again. Keep waiting for events. */
break;
case 'N': case 'T': case 'S': case 'X': case 'W':
{
- struct stop_reply *stop_reply;
-
/* There is a stop reply to handle. */
rs->waiting_for_stop_reply = 0;
stop_reply
- = (struct stop_reply *) remote_notif_parse (¬if_client_stop,
- rs->buf);
+ = (struct stop_reply *) remote_notif_parse (this,
+ ¬if_client_stop,
+ rs->buf.data ());
event_ptid = process_stop_reply (stop_reply, status);
break;
else if (status->kind != TARGET_WAITKIND_EXITED
&& status->kind != TARGET_WAITKIND_SIGNALLED)
{
- if (!ptid_equal (event_ptid, null_ptid))
+ if (event_ptid != null_ptid)
record_currthread (rs, event_ptid);
else
event_ptid = inferior_ptid;
ptid_t event_ptid;
if (target_is_non_stop_p ())
- event_ptid = remote_wait_ns (ptid, status, options);
+ event_ptid = wait_ns (ptid, status, options);
else
- event_ptid = remote_wait_as (ptid, status, options);
+ event_ptid = wait_as (ptid, status, options);
if (target_is_async_p ())
{
+ remote_state *rs = get_remote_state ();
+
/* If there are are events left in the queue tell the event loop
to return here. */
- if (!QUEUE_is_empty (stop_reply_p, stop_reply_queue))
- mark_async_event_handler (remote_async_inferior_event_token);
+ if (!rs->stop_reply_queue.empty ())
+ mark_async_event_handler (rs->remote_async_inferior_event_token);
}
return event_ptid;
/* Fetch a single register using a 'p' packet. */
-static int
-fetch_register_using_p (struct regcache *regcache, struct packet_reg *reg)
+int
+remote_target::fetch_register_using_p (struct regcache *regcache,
+ packet_reg *reg)
{
struct gdbarch *gdbarch = regcache->arch ();
struct remote_state *rs = get_remote_state ();
if (reg->pnum == -1)
return 0;
- p = rs->buf;
+ p = rs->buf.data ();
*p++ = 'p';
p += hexnumstr (p, reg->pnum);
*p++ = '\0';
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
- buf = rs->buf;
+ buf = rs->buf.data ();
- switch (packet_ok (buf, &remote_protocol_packets[PACKET_p]))
+ switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_p]))
{
case PACKET_OK:
break;
/* If this register is unfetchable, tell the regcache. */
if (buf[0] == 'x')
{
- regcache_raw_supply (regcache, reg->regnum, NULL);
+ regcache->raw_supply (reg->regnum, NULL);
return 1;
}
regp[i++] = fromhex (p[0]) * 16 + fromhex (p[1]);
p += 2;
}
- regcache_raw_supply (regcache, reg->regnum, regp);
+ regcache->raw_supply (reg->regnum, regp);
return 1;
}
/* Fetch the registers included in the target's 'g' packet. */
-static int
-send_g_packet (void)
+int
+remote_target::send_g_packet ()
{
struct remote_state *rs = get_remote_state ();
int buf_len;
- xsnprintf (rs->buf, get_remote_packet_size (), "g");
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "g");
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_check_result (rs->buf) == PACKET_ERROR)
error (_("Could not read registers; remote failure reply '%s'"),
- rs->buf);
+ rs->buf.data ());
/* We can get out of synch in various cases. If the first character
in the buffer is not a hex character, assume that has happened
if (remote_debug)
fprintf_unfiltered (gdb_stdlog,
"Bad register packet; fetching a new packet\n");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
}
- buf_len = strlen (rs->buf);
+ buf_len = strlen (rs->buf.data ());
/* Sanity check the received packet. */
if (buf_len % 2 != 0)
- error (_("Remote 'g' packet reply is of odd length: %s"), rs->buf);
+ error (_("Remote 'g' packet reply is of odd length: %s"), rs->buf.data ());
return buf_len / 2;
}
-static void
-process_g_packet (struct regcache *regcache)
+void
+remote_target::process_g_packet (struct regcache *regcache)
{
struct gdbarch *gdbarch = regcache->arch ();
struct remote_state *rs = get_remote_state ();
- remote_arch_state *rsa = get_remote_arch_state (gdbarch);
+ remote_arch_state *rsa = rs->get_remote_arch_state (gdbarch);
int i, buf_len;
char *p;
char *regs;
- buf_len = strlen (rs->buf);
+ buf_len = strlen (rs->buf.data ());
/* Further sanity checks, with knowledge of the architecture. */
if (buf_len > 2 * rsa->sizeof_g_packet)
error (_("Remote 'g' packet reply is too long (expected %ld bytes, got %d "
- "bytes): %s"), rsa->sizeof_g_packet, buf_len / 2, rs->buf);
+ "bytes): %s"),
+ rsa->sizeof_g_packet, buf_len / 2,
+ rs->buf.data ());
/* Save the size of the packet sent to us by the target. It is used
as a heuristic when determining the max size of packets that the
hex characters. Suck them all up, then supply them to the
register cacheing/storage mechanism. */
- p = rs->buf;
+ p = rs->buf.data ();
for (i = 0; i < rsa->sizeof_g_packet; i++)
{
if (p[0] == 0 || p[1] == 0)
if (r->in_g_packet)
{
- if ((r->offset + reg_size) * 2 > strlen (rs->buf))
+ if ((r->offset + reg_size) * 2 > strlen (rs->buf.data ()))
/* This shouldn't happen - we adjusted in_g_packet above. */
internal_error (__FILE__, __LINE__,
_("unexpected end of 'g' packet reply"));
else if (rs->buf[r->offset * 2] == 'x')
{
- gdb_assert (r->offset * 2 < strlen (rs->buf));
+ gdb_assert (r->offset * 2 < strlen (rs->buf.data ()));
/* The register isn't available, mark it as such (at
the same time setting the value to zero). */
- regcache_raw_supply (regcache, r->regnum, NULL);
+ regcache->raw_supply (r->regnum, NULL);
}
else
- regcache_raw_supply (regcache, r->regnum,
- regs + r->offset);
+ regcache->raw_supply (r->regnum, regs + r->offset);
}
}
}
-static void
-fetch_registers_using_g (struct regcache *regcache)
+void
+remote_target::fetch_registers_using_g (struct regcache *regcache)
{
send_g_packet ();
process_g_packet (regcache);
/* Make the remote selected traceframe match GDB's selected
traceframe. */
-static void
-set_remote_traceframe (void)
+void
+remote_target::set_remote_traceframe ()
{
int newnum;
struct remote_state *rs = get_remote_state ();
remote_target::fetch_registers (struct regcache *regcache, int regnum)
{
struct gdbarch *gdbarch = regcache->arch ();
- remote_arch_state *rsa = get_remote_arch_state (gdbarch);
+ struct remote_state *rs = get_remote_state ();
+ remote_arch_state *rsa = rs->get_remote_arch_state (gdbarch);
int i;
set_remote_traceframe ();
- set_general_thread (regcache_get_ptid (regcache));
+ set_general_thread (regcache->ptid ());
if (regnum >= 0)
{
return;
/* This register is not available. */
- regcache_raw_supply (regcache, reg->regnum, NULL);
+ regcache->raw_supply (reg->regnum, NULL);
return;
}
if (!fetch_register_using_p (regcache, &rsa->regs[i]))
{
/* This register is not available. */
- regcache_raw_supply (regcache, i, NULL);
+ regcache->raw_supply (i, NULL);
}
}
void
remote_target::prepare_to_store (struct regcache *regcache)
{
- remote_arch_state *rsa = get_remote_arch_state (regcache->arch ());
+ struct remote_state *rs = get_remote_state ();
+ remote_arch_state *rsa = rs->get_remote_arch_state (regcache->arch ());
int i;
/* Make sure the entire registers array is valid. */
/* Make sure all the necessary registers are cached. */
for (i = 0; i < gdbarch_num_regs (regcache->arch ()); i++)
if (rsa->regs[i].in_g_packet)
- regcache_raw_update (regcache, rsa->regs[i].regnum);
+ regcache->raw_update (rsa->regs[i].regnum);
break;
case PACKET_ENABLE:
break;
/* Helper: Attempt to store REGNUM using the P packet. Return fail IFF
packet was not recognized. */
-static int
-store_register_using_P (const struct regcache *regcache,
- struct packet_reg *reg)
+int
+remote_target::store_register_using_P (const struct regcache *regcache,
+ packet_reg *reg)
{
struct gdbarch *gdbarch = regcache->arch ();
struct remote_state *rs = get_remote_state ();
/* Try storing a single register. */
- char *buf = rs->buf;
+ char *buf = rs->buf.data ();
gdb_byte *regp = (gdb_byte *) alloca (register_size (gdbarch, reg->regnum));
char *p;
xsnprintf (buf, get_remote_packet_size (), "P%s=", phex_nz (reg->pnum, 0));
p = buf + strlen (buf);
- regcache_raw_collect (regcache, reg->regnum, regp);
+ regcache->raw_collect (reg->regnum, regp);
bin2hex (regp, p, register_size (gdbarch, reg->regnum));
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_P]))
{
return 1;
case PACKET_ERROR:
error (_("Could not write register \"%s\"; remote failure reply '%s'"),
- gdbarch_register_name (gdbarch, reg->regnum), rs->buf);
+ gdbarch_register_name (gdbarch, reg->regnum), rs->buf.data ());
case PACKET_UNKNOWN:
return 0;
default:
/* Store register REGNUM, or all registers if REGNUM == -1, from the
contents of the register cache buffer. FIXME: ignores errors. */
-static void
-store_registers_using_G (const struct regcache *regcache)
+void
+remote_target::store_registers_using_G (const struct regcache *regcache)
{
struct remote_state *rs = get_remote_state ();
- remote_arch_state *rsa = get_remote_arch_state (regcache->arch ());
+ remote_arch_state *rsa = rs->get_remote_arch_state (regcache->arch ());
gdb_byte *regs;
char *p;
struct packet_reg *r = &rsa->regs[i];
if (r->in_g_packet)
- regcache_raw_collect (regcache, r->regnum, regs + r->offset);
+ regcache->raw_collect (r->regnum, regs + r->offset);
}
}
/* Command describes registers byte by byte,
each byte encoded as two hex characters. */
- p = rs->buf;
+ p = rs->buf.data ();
*p++ = 'G';
bin2hex (regs, p, rsa->sizeof_g_packet);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_check_result (rs->buf) == PACKET_ERROR)
error (_("Could not write registers; remote failure reply '%s'"),
- rs->buf);
+ rs->buf.data ());
}
/* Store register REGNUM, or all registers if REGNUM == -1, from the contents
remote_target::store_registers (struct regcache *regcache, int regnum)
{
struct gdbarch *gdbarch = regcache->arch ();
- remote_arch_state *rsa = get_remote_arch_state (gdbarch);
+ struct remote_state *rs = get_remote_state ();
+ remote_arch_state *rsa = rs->get_remote_arch_state (gdbarch);
int i;
set_remote_traceframe ();
- set_general_thread (regcache_get_ptid (regcache));
+ set_general_thread (regcache->ptid ());
if (regnum >= 0)
{
clean. In cases like this, the user should clear "remote
X-packet". */
-static void
-check_binary_download (CORE_ADDR addr)
+void
+remote_target::check_binary_download (CORE_ADDR addr)
{
struct remote_state *rs = get_remote_state ();
{
char *p;
- p = rs->buf;
+ p = rs->buf.data ();
*p++ = 'X';
p += hexnumstr (p, (ULONGEST) addr);
*p++ = ',';
*p++ = ':';
*p = '\0';
- putpkt_binary (rs->buf, (int) (p - rs->buf));
- getpkt (&rs->buf, &rs->buf_size, 0);
+ putpkt_binary (rs->buf.data (), (int) (p - rs->buf.data ()));
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == '\0')
{
-> $m1000,4#??
<- eeeeffffeeeedddd */
-static enum target_xfer_status
-remote_write_bytes_aux (const char *header, CORE_ADDR memaddr,
- const gdb_byte *myaddr, ULONGEST len_units,
- int unit_size, ULONGEST *xfered_len_units,
- char packet_format, int use_length)
+target_xfer_status
+remote_target::remote_write_bytes_aux (const char *header, CORE_ADDR memaddr,
+ const gdb_byte *myaddr,
+ ULONGEST len_units,
+ int unit_size,
+ ULONGEST *xfered_len_units,
+ char packet_format, int use_length)
{
struct remote_state *rs = get_remote_state ();
char *p;
/* Construct the packet excluding the data: "<header><memaddr>,<len>:". */
- strcat (rs->buf, header);
- p = rs->buf + strlen (header);
+ strcat (rs->buf.data (), header);
+ p = rs->buf.data () + strlen (header);
/* Compute a best guess of the number of bytes actually transfered. */
if (packet_format == 'X')
units_written = todo_units;
}
- putpkt_binary (rs->buf, (int) (p - rs->buf));
- getpkt (&rs->buf, &rs->buf_size, 0);
+ putpkt_binary (rs->buf.data (), (int) (p - rs->buf.data ()));
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == 'E')
return TARGET_XFER_E_IO;
'enum target_xfer_status' value). Save the number of bytes
transferred in *XFERED_LEN. Only transfer a single packet. */
-static enum target_xfer_status
-remote_write_bytes (CORE_ADDR memaddr, const gdb_byte *myaddr, ULONGEST len,
- int unit_size, ULONGEST *xfered_len)
+target_xfer_status
+remote_target::remote_write_bytes (CORE_ADDR memaddr, const gdb_byte *myaddr,
+ ULONGEST len, int unit_size,
+ ULONGEST *xfered_len)
{
const char *packet_format = NULL;
See the comment of remote_write_bytes_aux for an example of
memory read/write exchange between gdb and the stub. */
-static enum target_xfer_status
-remote_read_bytes_1 (CORE_ADDR memaddr, gdb_byte *myaddr, ULONGEST len_units,
- int unit_size, ULONGEST *xfered_len_units)
+target_xfer_status
+remote_target::remote_read_bytes_1 (CORE_ADDR memaddr, gdb_byte *myaddr,
+ ULONGEST len_units,
+ int unit_size, ULONGEST *xfered_len_units)
{
struct remote_state *rs = get_remote_state ();
int buf_size_bytes; /* Max size of packet output buffer. */
/* Construct "m"<memaddr>","<len>". */
memaddr = remote_address_masked (memaddr);
- p = rs->buf;
+ p = rs->buf.data ();
*p++ = 'm';
p += hexnumstr (p, (ULONGEST) memaddr);
*p++ = ',';
p += hexnumstr (p, (ULONGEST) todo_units);
*p = '\0';
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == 'E'
&& isxdigit (rs->buf[1]) && isxdigit (rs->buf[2])
&& rs->buf[3] == '\0')
return TARGET_XFER_E_IO;
/* Reply describes memory byte by byte, each byte encoded as two hex
characters. */
- p = rs->buf;
+ p = rs->buf.data ();
decoded_bytes = hex2bin (p, myaddr, todo_units * unit_size);
/* Return what we have. Let higher layers handle partial reads. */
*xfered_len_units = (ULONGEST) (decoded_bytes / unit_size);
For interface/parameters/return description see target.h,
to_xfer_partial. */
-static enum target_xfer_status
-remote_xfer_live_readonly_partial (struct target_ops *ops, gdb_byte *readbuf,
- ULONGEST memaddr, ULONGEST len,
- int unit_size, ULONGEST *xfered_len)
+target_xfer_status
+remote_target::remote_xfer_live_readonly_partial (gdb_byte *readbuf,
+ ULONGEST memaddr,
+ ULONGEST len,
+ int unit_size,
+ ULONGEST *xfered_len)
{
struct target_section *secp;
struct target_section_table *table;
- secp = target_section_by_addr (ops, memaddr);
+ secp = target_section_by_addr (this, memaddr);
if (secp != NULL
- && (bfd_get_section_flags (secp->the_bfd_section->owner,
- secp->the_bfd_section)
- & SEC_READONLY))
+ && (bfd_section_flags (secp->the_bfd_section) & SEC_READONLY))
{
struct target_section *p;
ULONGEST memend = memaddr + len;
- table = target_get_section_table (ops);
+ table = target_get_section_table (this);
for (p = table->sections; p < table->sections_end; p++)
{
first if the requested memory is unavailable in traceframe.
Otherwise, fall back to remote_read_bytes_1. */
-static enum target_xfer_status
-remote_read_bytes (struct target_ops *ops, CORE_ADDR memaddr,
- gdb_byte *myaddr, ULONGEST len, int unit_size,
- ULONGEST *xfered_len)
+target_xfer_status
+remote_target::remote_read_bytes (CORE_ADDR memaddr,
+ gdb_byte *myaddr, ULONGEST len, int unit_size,
+ ULONGEST *xfered_len)
{
if (len == 0)
return TARGET_XFER_EOF;
}
/* This goes through the topmost target again. */
- res = remote_xfer_live_readonly_partial (ops, myaddr, memaddr,
+ res = remote_xfer_live_readonly_partial (myaddr, memaddr,
len, unit_size, xfered_len);
if (res == TARGET_XFER_OK)
return TARGET_XFER_OK;
FORMAT and the remaining arguments, then gets the reply. Returns
whether the packet was a success, a failure, or unknown. */
-static enum packet_result remote_send_printf (const char *format, ...)
- ATTRIBUTE_PRINTF (1, 2);
-
-static enum packet_result
-remote_send_printf (const char *format, ...)
+packet_result
+remote_target::remote_send_printf (const char *format, ...)
{
struct remote_state *rs = get_remote_state ();
int max_size = get_remote_packet_size ();
va_start (ap, format);
rs->buf[0] = '\0';
- if (vsnprintf (rs->buf, max_size, format, ap) >= max_size)
+ int size = vsnprintf (rs->buf.data (), max_size, format, ap);
+
+ va_end (ap);
+
+ if (size >= max_size)
internal_error (__FILE__, __LINE__, _("Too long remote packet."));
if (putpkt (rs->buf) < 0)
error (_("Communication problem with target."));
rs->buf[0] = '\0';
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
return packet_check_result (rs->buf);
}
}
}
-static enum target_xfer_status
-remote_flash_write (struct target_ops *ops, ULONGEST address,
- ULONGEST length, ULONGEST *xfered_len,
- const gdb_byte *data)
+target_xfer_status
+remote_target::remote_flash_write (ULONGEST address,
+ ULONGEST length, ULONGEST *xfered_len,
+ const gdb_byte *data)
{
scoped_restore restore_timeout
= make_scoped_restore (&remote_timeout, remote_flash_timeout);
sequence, as that would break communication with the remote server.
See remote_serial_quit_handler for more detail. */
-static int
-readchar (int timeout)
+int
+remote_target::readchar (int timeout)
{
int ch;
struct remote_state *rs = get_remote_state ();
{
+ scoped_restore restore_quit_target
+ = make_scoped_restore (&curr_quit_handler_target, this);
scoped_restore restore_quit
- = make_scoped_restore (&quit_handler, remote_serial_quit_handler);
+ = make_scoped_restore (&quit_handler, ::remote_serial_quit_handler);
rs->got_ctrlc_during_io = 0;
communication with the remote server. See
remote_serial_quit_handler for more detail. */
-static void
-remote_serial_write (const char *str, int len)
+void
+remote_target::remote_serial_write (const char *str, int len)
{
struct remote_state *rs = get_remote_state ();
+ scoped_restore restore_quit_target
+ = make_scoped_restore (&curr_quit_handler_target, this);
scoped_restore restore_quit
- = make_scoped_restore (&quit_handler, remote_serial_quit_handler);
+ = make_scoped_restore (&quit_handler, ::remote_serial_quit_handler);
rs->got_ctrlc_during_io = 0;
}
int
-putpkt (const char *buf)
+remote_target::putpkt (const char *buf)
{
return putpkt_binary (buf, strlen (buf));
}
+/* Wrapper around remote_target::putpkt to avoid exporting
+ remote_target. */
+
+int
+putpkt (remote_target *remote, const char *buf)
+{
+ return remote->putpkt (buf);
+}
+
/* Send a packet to the remote machine, with error checking. The data
of the packet is in BUF. The string in BUF can be at most
get_remote_packet_size () - 5 to account for the $, # and checksum,
and for a possible /0 if we are debugging (remote_debug) and want
to print the sent packet as a string. */
-static int
-putpkt_binary (const char *buf, int cnt)
+int
+remote_target::putpkt_binary (const char *buf, int cnt)
{
struct remote_state *rs = get_remote_state ();
int i;
for an ack. */
/* We've found the start of a notification. Now
collect the data. */
- val = read_frame (&rs->buf, &rs->buf_size);
+ val = read_frame (&rs->buf);
if (val >= 0)
{
if (remote_debug)
{
- std::string str = escape_buffer (rs->buf, val);
+ std::string str = escape_buffer (rs->buf.data (), val);
fprintf_unfiltered (gdb_stdlog,
" Notification received: %s\n",
str.c_str ());
}
- handle_notification (rs->notif_state, rs->buf);
+ handle_notification (rs->notif_state, rs->buf.data ());
/* We're in sync now, rewait for the ack. */
tcount = 0;
}
fprintf_unfiltered (gdb_stdlog, "putpkt: Junk: ");
}
fputc_unfiltered (ch & 0177, gdb_stdlog);
- fprintf_unfiltered (gdb_stdlog, "%s", rs->buf);
+ fprintf_unfiltered (gdb_stdlog, "%s", rs->buf.data ());
}
}
continue;
/* Come here after finding the start of a frame when we expected an
ack. Do our best to discard the rest of this packet. */
-static void
-skip_frame (void)
+void
+remote_target::skip_frame ()
{
int c;
/* Come here after finding the start of the frame. Collect the rest
into *BUF, verifying the checksum, length, and handling run-length
compression. NUL terminate the buffer. If there is not enough room,
- expand *BUF using xrealloc.
+ expand *BUF.
Returns -1 on error, number of characters in buffer (ignoring the
trailing NULL) on success. (could be extended to return one of the
SERIAL status indications). */
-static long
-read_frame (char **buf_p,
- long *sizeof_buf)
+long
+remote_target::read_frame (gdb::char_vector *buf_p)
{
unsigned char csum;
long bc;
int c;
- char *buf = *buf_p;
+ char *buf = buf_p->data ();
struct remote_state *rs = get_remote_state ();
csum = 0;
if (repeat > 0 && repeat <= 255 && bc > 0)
{
- if (bc + repeat - 1 >= *sizeof_buf - 1)
+ if (bc + repeat - 1 >= buf_p->size () - 1)
{
/* Make some more room in the buffer. */
- *sizeof_buf += repeat;
- *buf_p = (char *) xrealloc (*buf_p, *sizeof_buf);
- buf = *buf_p;
+ buf_p->resize (buf_p->size () + repeat);
+ buf = buf_p->data ();
}
memset (&buf[bc], buf[bc - 1], repeat);
return -1;
}
default:
- if (bc >= *sizeof_buf - 1)
+ if (bc >= buf_p->size () - 1)
{
/* Make some more room in the buffer. */
- *sizeof_buf *= 2;
- *buf_p = (char *) xrealloc (*buf_p, *sizeof_buf);
- buf = *buf_p;
+ buf_p->resize (buf_p->size () * 2);
+ buf = buf_p->data ();
}
buf[bc++] = c;
}
}
+/* Set this to the maximum number of seconds to wait instead of waiting forever
+ in target_wait(). If this timer times out, then it generates an error and
+ the command is aborted. This replaces most of the need for timeouts in the
+ GDB test suite, and makes it possible to distinguish between a hung target
+ and one with slow communications. */
+
+static int watchdog = 0;
+static void
+show_watchdog (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Watchdog timer is %s.\n"), value);
+}
+
/* Read a packet from the remote machine, with error checking, and
- store it in *BUF. Resize *BUF using xrealloc if necessary to hold
- the result, and update *SIZEOF_BUF. If FOREVER, wait forever
- rather than timing out; this is used (in synchronous mode) to wait
- for a target that is is executing user code to stop. */
+ store it in *BUF. Resize *BUF if necessary to hold the result. If
+ FOREVER, wait forever rather than timing out; this is used (in
+ synchronous mode) to wait for a target that is is executing user
+ code to stop. */
/* FIXME: ezannoni 2000-02-01 this wrapper is necessary so that we
don't have to change all the calls to getpkt to deal with the
return value, because at the moment I don't know what the right
thing to do it for those. */
+
void
-getpkt (char **buf,
- long *sizeof_buf,
- int forever)
+remote_target::getpkt (gdb::char_vector *buf, int forever)
{
- getpkt_sane (buf, sizeof_buf, forever);
+ getpkt_sane (buf, forever);
}
/* Read a packet from the remote machine, with error checking, and
- store it in *BUF. Resize *BUF using xrealloc if necessary to hold
- the result, and update *SIZEOF_BUF. If FOREVER, wait forever
- rather than timing out; this is used (in synchronous mode) to wait
- for a target that is is executing user code to stop. If FOREVER ==
- 0, this function is allowed to time out gracefully and return an
- indication of this to the caller. Otherwise return the number of
- bytes read. If EXPECTING_NOTIF, consider receiving a notification
- enough reason to return to the caller. *IS_NOTIF is an output
- boolean that indicates whether *BUF holds a notification or not
- (a regular packet). */
+ store it in *BUF. Resize *BUF if necessary to hold the result. If
+ FOREVER, wait forever rather than timing out; this is used (in
+ synchronous mode) to wait for a target that is is executing user
+ code to stop. If FOREVER == 0, this function is allowed to time
+ out gracefully and return an indication of this to the caller.
+ Otherwise return the number of bytes read. If EXPECTING_NOTIF,
+ consider receiving a notification enough reason to return to the
+ caller. *IS_NOTIF is an output boolean that indicates whether *BUF
+ holds a notification or not (a regular packet). */
-static int
-getpkt_or_notif_sane_1 (char **buf, long *sizeof_buf, int forever,
- int expecting_notif, int *is_notif)
+int
+remote_target::getpkt_or_notif_sane_1 (gdb::char_vector *buf,
+ int forever, int expecting_notif,
+ int *is_notif)
{
struct remote_state *rs = get_remote_state ();
int c;
previously cached response. */
rs->cached_wait_status = 0;
- strcpy (*buf, "timeout");
+ strcpy (buf->data (), "timeout");
if (forever)
timeout = watchdog > 0 ? watchdog : -1;
{
/* We've found the start of a packet or notification.
Now collect the data. */
- val = read_frame (buf, sizeof_buf);
+ val = read_frame (buf);
if (val >= 0)
break;
}
if (remote_debug)
{
std::string str
- = escape_buffer (*buf,
+ = escape_buffer (buf->data (),
std::min (val, REMOTE_DEBUG_MAX_CHAR));
fprintf_unfiltered (gdb_stdlog, "Packet received: %s",
if (remote_debug)
{
- std::string str = escape_buffer (*buf, val);
+ std::string str = escape_buffer (buf->data (), val);
fprintf_unfiltered (gdb_stdlog,
" Notification received: %s\n",
if (is_notif != NULL)
*is_notif = 1;
- handle_notification (rs->notif_state, *buf);
+ handle_notification (rs->notif_state, buf->data ());
/* Notifications require no acknowledgement. */
}
}
-static int
-getpkt_sane (char **buf, long *sizeof_buf, int forever)
-{
- return getpkt_or_notif_sane_1 (buf, sizeof_buf, forever, 0, NULL);
-}
-
-static int
-getpkt_or_notif_sane (char **buf, long *sizeof_buf, int forever,
- int *is_notif)
+int
+remote_target::getpkt_sane (gdb::char_vector *buf, int forever)
{
- return getpkt_or_notif_sane_1 (buf, sizeof_buf, forever, 1,
- is_notif);
+ return getpkt_or_notif_sane_1 (buf, forever, 0, NULL);
}
-/* Check whether EVENT is a fork event for the process specified
- by the pid passed in DATA, and if it is, kill the fork child. */
-
-static int
-kill_child_of_pending_fork (QUEUE (stop_reply_p) *q,
- QUEUE_ITER (stop_reply_p) *iter,
- stop_reply_p event,
- void *data)
+int
+remote_target::getpkt_or_notif_sane (gdb::char_vector *buf, int forever,
+ int *is_notif)
{
- struct queue_iter_param *param = (struct queue_iter_param *) data;
- int parent_pid = *(int *) param->input;
-
- if (is_pending_fork_parent (&event->ws, parent_pid, event->ptid))
- {
- struct remote_state *rs = get_remote_state ();
- int child_pid = ptid_get_pid (event->ws.value.related_pid);
- int res;
-
- res = remote_vkill (child_pid, rs);
- if (res != 0)
- error (_("Can't kill fork child process %d"), child_pid);
- }
-
- return 1;
+ return getpkt_or_notif_sane_1 (buf, forever, 1, is_notif);
}
/* Kill any new fork children of process PID that haven't been
processed by follow_fork. */
-static void
-kill_new_fork_children (int pid, struct remote_state *rs)
+void
+remote_target::kill_new_fork_children (int pid)
{
- struct thread_info *thread;
+ remote_state *rs = get_remote_state ();
struct notif_client *notif = ¬if_client_stop;
- struct queue_iter_param param;
/* Kill the fork child threads of any threads in process PID
that are stopped at a fork event. */
- ALL_NON_EXITED_THREADS (thread)
+ for (thread_info *thread : all_non_exited_threads ())
{
struct target_waitstatus *ws = &thread->pending_follow;
if (is_pending_fork_parent (ws, pid, thread->ptid))
{
- struct remote_state *rs = get_remote_state ();
- int child_pid = ptid_get_pid (ws->value.related_pid);
+ int child_pid = ws->value.related_pid.pid ();
int res;
- res = remote_vkill (child_pid, rs);
+ res = remote_vkill (child_pid);
if (res != 0)
error (_("Can't kill fork child process %d"), child_pid);
}
/* Check for any pending fork events (not reported or processed yet)
in process PID and kill those fork child threads as well. */
remote_notif_get_pending_events (notif);
- param.input = &pid;
- param.output = NULL;
- QUEUE_iterate (stop_reply_p, stop_reply_queue,
- kill_child_of_pending_fork, ¶m);
+ for (auto &event : rs->stop_reply_queue)
+ if (is_pending_fork_parent (&event->ws, pid, event->ptid))
+ {
+ int child_pid = event->ws.value.related_pid.pid ();
+ int res;
+
+ res = remote_vkill (child_pid);
+ if (res != 0)
+ error (_("Can't kill fork child process %d"), child_pid);
+ }
}
\f
remote_target::kill ()
{
int res = -1;
- int pid = ptid_get_pid (inferior_ptid);
+ int pid = inferior_ptid.pid ();
struct remote_state *rs = get_remote_state ();
if (packet_support (PACKET_vKill) != PACKET_DISABLE)
kill the child task. We need to do this before killing the
parent task because if this is a vfork then the parent will
be sleeping. */
- kill_new_fork_children (pid, rs);
+ kill_new_fork_children (pid);
- res = remote_vkill (pid, rs);
+ res = remote_vkill (pid);
if (res == 0)
{
target_mourn_inferior (inferior_ptid);
/* Send a kill request to the target using the 'vKill' packet. */
-static int
-remote_vkill (int pid, struct remote_state *rs)
+int
+remote_target::remote_vkill (int pid)
{
if (packet_support (PACKET_vKill) == PACKET_DISABLE)
return -1;
+ remote_state *rs = get_remote_state ();
+
/* Tell the remote target to detach. */
- xsnprintf (rs->buf, get_remote_packet_size (), "vKill;%x", pid);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "vKill;%x", pid);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf,
&remote_protocol_packets[PACKET_vKill]))
/* Send a kill request to the target using the 'k' packet. */
-static void
-remote_kill_k (void)
+void
+remote_target::remote_kill_k ()
{
/* Catch errors so the user can quit from gdb even when we
aren't on speaking terms with the remote system. */
- TRY
+ try
{
putpkt ("k");
}
- CATCH (ex, RETURN_MASK_ERROR)
+ catch (const gdb_exception_error &ex)
{
if (ex.error == TARGET_CLOSE_ERROR)
{
/* Otherwise, something went wrong. We didn't actually kill
the target. Just propagate the exception, and let the
user or higher layers decide what to do. */
- throw_exception (ex);
+ throw;
}
- END_CATCH
}
void
{
struct remote_state *rs = get_remote_state ();
+ /* We're no longer interested in notification events of an inferior
+ that exited or was killed/detached. */
+ discard_pending_stop_replies (current_inferior ());
+
/* In 'target remote' mode with one inferior, we close the connection. */
if (!rs->extended && number_of_live_inferiors () <= 1)
{
/* Check whether the target is running now - some remote stubs
automatically restart after kill. */
putpkt ("?");
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (rs->buf[0] == 'S' || rs->buf[0] == 'T')
{
return packet_support (PACKET_QDisableRandomization) == PACKET_ENABLE;
}
-static void
-extended_remote_disable_randomization (int val)
+void
+remote_target::extended_remote_disable_randomization (int val)
{
struct remote_state *rs = get_remote_state ();
char *reply;
- xsnprintf (rs->buf, get_remote_packet_size (), "QDisableRandomization:%x",
- val);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
+ "QDisableRandomization:%x", val);
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
if (*reply == '\0')
error (_("Bogus QDisableRandomization reply from target: %s"), reply);
}
-static int
-extended_remote_run (const std::string &args)
+int
+remote_target::extended_remote_run (const std::string &args)
{
struct remote_state *rs = get_remote_state ();
int len;
if (packet_support (PACKET_vRun) == PACKET_DISABLE)
return -1;
- strcpy (rs->buf, "vRun;");
- len = strlen (rs->buf);
+ strcpy (rs->buf.data (), "vRun;");
+ len = strlen (rs->buf.data ());
if (strlen (remote_exec_file) * 2 + len >= get_remote_packet_size ())
error (_("Remote file name too long for run packet"));
- len += 2 * bin2hex ((gdb_byte *) remote_exec_file, rs->buf + len,
+ len += 2 * bin2hex ((gdb_byte *) remote_exec_file, rs->buf.data () + len,
strlen (remote_exec_file));
if (!args.empty ())
if (strlen (argv[i]) * 2 + 1 + len >= get_remote_packet_size ())
error (_("Argument list too long for run packet"));
rs->buf[len++] = ';';
- len += 2 * bin2hex ((gdb_byte *) argv[i], rs->buf + len,
+ len += 2 * bin2hex ((gdb_byte *) argv[i], rs->buf.data () + len,
strlen (argv[i]));
}
}
rs->buf[len++] = '\0';
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_vRun]))
{
or "QEnvironmentUnsetVariable". VALUE is the variable to be
sent. */
-static void
-send_environment_packet (struct remote_state *rs,
- const char *action,
- const char *packet,
- const char *value)
+void
+remote_target::send_environment_packet (const char *action,
+ const char *packet,
+ const char *value)
{
+ remote_state *rs = get_remote_state ();
+
/* Convert the environment variable to an hex string, which
is the best format to be transmitted over the wire. */
std::string encoded_value = bin2hex ((const gdb_byte *) value,
strlen (value));
- xsnprintf (rs->buf, get_remote_packet_size (),
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
"%s:%s", packet, encoded_value.c_str ());
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") != 0)
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") != 0)
warning (_("Unable to %s environment variable '%s' on remote."),
action, value);
}
/* Helper function to handle the QEnvironment* packets. */
-static void
-extended_remote_environment_support (struct remote_state *rs)
+void
+remote_target::extended_remote_environment_support ()
{
+ remote_state *rs = get_remote_state ();
+
if (packet_support (PACKET_QEnvironmentReset) != PACKET_DISABLE)
{
putpkt ("QEnvironmentReset");
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") != 0)
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") != 0)
warning (_("Unable to reset environment on remote."));
}
if (packet_support (PACKET_QEnvironmentHexEncoded) != PACKET_DISABLE)
for (const std::string &el : e->user_set_env ())
- send_environment_packet (rs, "set", "QEnvironmentHexEncoded",
+ send_environment_packet ("set", "QEnvironmentHexEncoded",
el.c_str ());
if (packet_support (PACKET_QEnvironmentUnset) != PACKET_DISABLE)
for (const std::string &el : e->user_unset_env ())
- send_environment_packet (rs, "unset", "QEnvironmentUnset", el.c_str ());
+ send_environment_packet ("unset", "QEnvironmentUnset", el.c_str ());
}
/* Helper function to set the current working directory for the
inferior in the remote target. */
-static void
-extended_remote_set_inferior_cwd (struct remote_state *rs)
+void
+remote_target::extended_remote_set_inferior_cwd ()
{
if (packet_support (PACKET_QSetWorkingDir) != PACKET_DISABLE)
{
const char *inferior_cwd = get_inferior_cwd ();
+ remote_state *rs = get_remote_state ();
if (inferior_cwd != NULL)
{
std::string hexpath = bin2hex ((const gdb_byte *) inferior_cwd,
strlen (inferior_cwd));
- xsnprintf (rs->buf, get_remote_packet_size (),
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
"QSetWorkingDir:%s", hexpath.c_str ());
}
else
{
/* An empty inferior_cwd means that the user wants us to
reset the remote server's inferior's cwd. */
- xsnprintf (rs->buf, get_remote_packet_size (),
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
"QSetWorkingDir:");
}
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_ok (rs->buf,
&remote_protocol_packets[PACKET_QSetWorkingDir])
!= PACKET_OK)
error (_("\
Remote replied unexpectedly while setting the inferior's working\n\
directory: %s"),
- rs->buf);
+ rs->buf.data ());
}
}
remote inferior using a shell. */
if (packet_support (PACKET_QStartupWithShell) != PACKET_DISABLE)
{
- xsnprintf (rs->buf, get_remote_packet_size (),
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
"QStartupWithShell:%d", startup_with_shell ? 1 : 0);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (strcmp (rs->buf, "OK") != 0)
+ getpkt (&rs->buf, 0);
+ if (strcmp (rs->buf.data (), "OK") != 0)
error (_("\
Remote replied unexpectedly while setting startup-with-shell: %s"),
- rs->buf);
+ rs->buf.data ());
}
- extended_remote_environment_support (rs);
+ extended_remote_environment_support ();
- extended_remote_set_inferior_cwd (rs);
+ extended_remote_set_inferior_cwd ();
/* Now restart the remote server. */
run_worked = extended_remote_run (args) != -1;
if (remote_exec_file[0])
error (_("Remote target does not support \"set remote exec-file\""));
if (!args.empty ())
- error (_("Remote target does not support \"set args\" or run <ARGS>"));
+ error (_("Remote target does not support \"set args\" or run ARGS"));
/* Fall back to "R". */
extended_remote_restart ();
}
- if (!have_inferiors ())
- {
- /* Clean up from the last time we ran, before we mark the target
- running again. This will mark breakpoints uninserted, and
- get_offsets may insert breakpoints. */
- init_thread_list ();
- init_wait_for_inferior ();
- }
-
/* vRun's success return is a stop reply. */
- stop_reply = run_worked ? rs->buf : NULL;
+ stop_reply = run_worked ? rs->buf.data () : NULL;
add_current_inferior_and_thread (stop_reply);
/* Get updated offsets, if the stub uses qOffsets. */
set_general_process ();
rs = get_remote_state ();
- p = rs->buf;
- endbuf = rs->buf + get_remote_packet_size ();
+ p = rs->buf.data ();
+ endbuf = p + get_remote_packet_size ();
*(p++) = 'Z';
*(p++) = '0';
remote_add_target_side_commands (gdbarch, bp_tgt, p);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_Z0]))
{
if (packet_support (PACKET_Z0) != PACKET_DISABLE)
{
- char *p = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *p = rs->buf.data ();
+ char *endbuf = p + get_remote_packet_size ();
/* Make sure the remote is pointing at the right process, if
necessary. */
xsnprintf (p, endbuf - p, ",%d", bp_tgt->kind);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
return (rs->buf[0] == 'E');
}
enum target_hw_bp_type type, struct expression *cond)
{
struct remote_state *rs = get_remote_state ();
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *endbuf = rs->buf.data () + get_remote_packet_size ();
char *p;
enum Z_packet_type packet = watchpoint_to_Z_packet (type);
if (!gdbarch_has_global_breakpoints (target_gdbarch ()))
set_general_process ();
- xsnprintf (rs->buf, endbuf - rs->buf, "Z%x,", packet);
- p = strchr (rs->buf, '\0');
+ xsnprintf (rs->buf.data (), endbuf - rs->buf.data (), "Z%x,", packet);
+ p = strchr (rs->buf.data (), '\0');
addr = remote_address_masked (addr);
p += hexnumstr (p, (ULONGEST) addr);
xsnprintf (p, endbuf - p, ",%x", len);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_Z0 + packet]))
{
enum target_hw_bp_type type, struct expression *cond)
{
struct remote_state *rs = get_remote_state ();
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *endbuf = rs->buf.data () + get_remote_packet_size ();
char *p;
enum Z_packet_type packet = watchpoint_to_Z_packet (type);
if (!gdbarch_has_global_breakpoints (target_gdbarch ()))
set_general_process ();
- xsnprintf (rs->buf, endbuf - rs->buf, "z%x,", packet);
- p = strchr (rs->buf, '\0');
+ xsnprintf (rs->buf.data (), endbuf - rs->buf.data (), "z%x,", packet);
+ p = strchr (rs->buf.data (), '\0');
addr = remote_address_masked (addr);
p += hexnumstr (p, (ULONGEST) addr);
xsnprintf (p, endbuf - p, ",%x", len);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_Z0 + packet]))
{
}
-int remote_hw_watchpoint_limit = -1;
-int remote_hw_watchpoint_length_limit = -1;
-int remote_hw_breakpoint_limit = -1;
+static int remote_hw_watchpoint_limit = -1;
+static int remote_hw_watchpoint_length_limit = -1;
+static int remote_hw_breakpoint_limit = -1;
int
remote_target::region_ok_for_hw_watchpoint (CORE_ADDR addr, int len)
set_general_process ();
rs = get_remote_state ();
- p = rs->buf;
- endbuf = rs->buf + get_remote_packet_size ();
+ p = rs->buf.data ();
+ endbuf = p + get_remote_packet_size ();
*(p++) = 'Z';
*(p++) = '1';
remote_add_target_side_commands (gdbarch, bp_tgt, p);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_Z1]))
{
case PACKET_ERROR:
if (rs->buf[1] == '.')
{
- message = strchr (rs->buf + 2, '.');
+ message = strchr (&rs->buf[2], '.');
if (message)
error (_("Remote failure reply: %s"), message + 1);
}
{
CORE_ADDR addr;
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *p = rs->buf.data ();
+ char *endbuf = p + get_remote_packet_size ();
if (packet_support (PACKET_Z1) == PACKET_DISABLE)
return -1;
xsnprintf (p, endbuf - p, ",%x", bp_tgt->kind);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_Z1]))
{
set_general_process ();
/* FIXME: assumes lma can fit into long. */
- xsnprintf (rs->buf, get_remote_packet_size (), "qCRC:%lx,%lx",
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "qCRC:%lx,%lx",
(long) lma, (long) size);
putpkt (rs->buf);
reply. */
host_crc = xcrc32 (data, size, 0xffffffff);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
result = packet_ok (rs->buf,
&remote_protocol_packets[PACKET_qCRC]);
if (!exec_bfd)
error (_("command cannot be used without an exec file"));
- /* Make sure the remote is pointing at the right process. */
- set_general_process ();
-
if (args != NULL && strcmp (args, "-r") == 0)
{
read_only = 1;
if (read_only && (s->flags & SEC_READONLY) == 0)
continue; /* Skip writeable sections */
- size = bfd_get_section_size (s);
+ size = bfd_section_size (s);
if (size == 0)
continue; /* Skip zero-length section. */
- sectname = bfd_get_section_name (exec_bfd, s);
+ sectname = bfd_section_name (s);
if (args && strcmp (args, sectname) != 0)
continue; /* Not the section selected by user. */
into remote target. The number of bytes written to the remote
target is returned, or -1 for error. */
-static enum target_xfer_status
-remote_write_qxfer (const char *object_name,
- const char *annex, const gdb_byte *writebuf,
- ULONGEST offset, LONGEST len, ULONGEST *xfered_len,
- struct packet_config *packet)
+target_xfer_status
+remote_target::remote_write_qxfer (const char *object_name,
+ const char *annex, const gdb_byte *writebuf,
+ ULONGEST offset, LONGEST len,
+ ULONGEST *xfered_len,
+ struct packet_config *packet)
{
int i, buf_len;
ULONGEST n;
return TARGET_XFER_E_IO;
/* Insert header. */
- i = snprintf (rs->buf, max_size,
+ i = snprintf (rs->buf.data (), max_size,
"qXfer:%s:write:%s:%s:",
object_name, annex ? annex : "",
phex_nz (offset, sizeof offset));
/* Escape as much data as fits into rs->buf. */
buf_len = remote_escape_output
- (writebuf, len, 1, (gdb_byte *) rs->buf + i, &max_size, max_size);
+ (writebuf, len, 1, (gdb_byte *) rs->buf.data () + i, &max_size, max_size);
- if (putpkt_binary (rs->buf, i + buf_len) < 0
- || getpkt_sane (&rs->buf, &rs->buf_size, 0) < 0
+ if (putpkt_binary (rs->buf.data (), i + buf_len) < 0
+ || getpkt_sane (&rs->buf, 0) < 0
|| packet_ok (rs->buf, packet) != PACKET_OK)
return TARGET_XFER_E_IO;
- unpack_varlen_hex (rs->buf, &n);
+ unpack_varlen_hex (rs->buf.data (), &n);
*xfered_len = n;
return (*xfered_len != 0) ? TARGET_XFER_OK : TARGET_XFER_EOF;
EOF. PACKET is checked and updated to indicate whether the remote
target supports this object. */
-static enum target_xfer_status
-remote_read_qxfer (const char *object_name,
- const char *annex,
- gdb_byte *readbuf, ULONGEST offset, LONGEST len,
- ULONGEST *xfered_len,
- struct packet_config *packet)
+target_xfer_status
+remote_target::remote_read_qxfer (const char *object_name,
+ const char *annex,
+ gdb_byte *readbuf, ULONGEST offset,
+ LONGEST len,
+ ULONGEST *xfered_len,
+ struct packet_config *packet)
{
struct remote_state *rs = get_remote_state ();
LONGEST i, n, packet_len;
the target is free to respond with slightly less data. We subtract
five to account for the response type and the protocol frame. */
n = std::min<LONGEST> (get_remote_packet_size () - 5, len);
- snprintf (rs->buf, get_remote_packet_size () - 4, "qXfer:%s:read:%s:%s,%s",
+ snprintf (rs->buf.data (), get_remote_packet_size () - 4,
+ "qXfer:%s:read:%s:%s,%s",
object_name, annex ? annex : "",
phex_nz (offset, sizeof offset),
phex_nz (n, sizeof n));
return TARGET_XFER_E_IO;
rs->buf[0] = '\0';
- packet_len = getpkt_sane (&rs->buf, &rs->buf_size, 0);
+ packet_len = getpkt_sane (&rs->buf, 0);
if (packet_len < 0 || packet_ok (rs->buf, packet) != PACKET_OK)
return TARGET_XFER_E_IO;
if (rs->buf[0] != 'l' && rs->buf[0] != 'm')
- error (_("Unknown remote qXfer reply: %s"), rs->buf);
+ error (_("Unknown remote qXfer reply: %s"), rs->buf.data ());
/* 'm' means there is (or at least might be) more data after this
batch. That does not make sense unless there's at least one byte
error (_("Remote qXfer reply contained no data."));
/* Got some data. */
- i = remote_unescape_input ((gdb_byte *) rs->buf + 1,
+ i = remote_unescape_input ((gdb_byte *) rs->buf.data () + 1,
packet_len - 1, readbuf, n);
/* 'l' is an EOF marker, possibly including a final block of data,
return remote_write_bytes (offset, writebuf, len, unit_size,
xfered_len);
else
- return remote_read_bytes (this, offset, readbuf, len, unit_size,
+ return remote_read_bytes (offset, readbuf, len, unit_size,
xfered_len);
}
- /* Handle SPU memory using qxfer packets. */
- if (object == TARGET_OBJECT_SPU)
- {
- if (readbuf)
- return remote_read_qxfer ("spu", annex, readbuf, offset, len,
- xfered_len, &remote_protocol_packets
- [PACKET_qXfer_spu_read]);
- else
- return remote_write_qxfer ("spu", annex, writebuf, offset, len,
- xfered_len, &remote_protocol_packets
- [PACKET_qXfer_spu_write]);
- }
-
/* Handle extra signal info using qxfer packets. */
if (object == TARGET_OBJECT_SIGNAL_INFO)
{
switch (object)
{
case TARGET_OBJECT_FLASH:
- return remote_flash_write (this, offset, len, xfered_len,
+ return remote_flash_write (offset, len, xfered_len,
writebuf);
default:
gdb_assert (annex != NULL);
gdb_assert (readbuf != NULL);
- p2 = rs->buf;
+ p2 = rs->buf.data ();
*p2++ = 'q';
*p2++ = query_type;
if (i < 0)
return TARGET_XFER_E_IO;
- getpkt (&rs->buf, &rs->buf_size, 0);
- strcpy ((char *) readbuf, rs->buf);
+ getpkt (&rs->buf, 0);
+ strcpy ((char *) readbuf, rs->buf.data ());
*xfered_len = strlen ((char *) readbuf);
return (*xfered_len != 0) ? TARGET_XFER_OK : TARGET_XFER_EOF;
set_general_process ();
/* Insert header. */
- i = snprintf (rs->buf, max_size,
+ i = snprintf (rs->buf.data (), max_size,
"qSearch:memory:%s;%s;",
phex_nz (start_addr, addr_size),
phex_nz (search_space_len, sizeof (search_space_len)));
/* Escape as much data as fits into rs->buf. */
escaped_pattern_len =
- remote_escape_output (pattern, pattern_len, 1, (gdb_byte *) rs->buf + i,
+ remote_escape_output (pattern, pattern_len, 1,
+ (gdb_byte *) rs->buf.data () + i,
&used_pattern_len, max_size);
/* Bail if the pattern is too large. */
if (used_pattern_len != pattern_len)
error (_("Pattern is too large to transmit to remote target."));
- if (putpkt_binary (rs->buf, i + escaped_pattern_len) < 0
- || getpkt_sane (&rs->buf, &rs->buf_size, 0) < 0
+ if (putpkt_binary (rs->buf.data (), i + escaped_pattern_len) < 0
+ || getpkt_sane (&rs->buf, 0) < 0
|| packet_ok (rs->buf, packet) != PACKET_OK)
{
/* The request may not have worked because the command is not
{
found = 1;
if (rs->buf[1] != ',')
- error (_("Unknown qSearch:memory reply: %s"), rs->buf);
- unpack_varlen_hex (rs->buf + 2, &found_addr);
+ error (_("Unknown qSearch:memory reply: %s"), rs->buf.data ());
+ unpack_varlen_hex (&rs->buf[2], &found_addr);
*found_addrp = found_addr;
}
else
- error (_("Unknown qSearch:memory reply: %s"), rs->buf);
+ error (_("Unknown qSearch:memory reply: %s"), rs->buf.data ());
return found;
}
remote_target::rcmd (const char *command, struct ui_file *outbuf)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
if (!rs->remote_desc)
error (_("remote rcmd is only available after target open"));
command = "";
/* The query prefix. */
- strcpy (rs->buf, "qRcmd,");
- p = strchr (rs->buf, '\0');
+ strcpy (rs->buf.data (), "qRcmd,");
+ p = strchr (rs->buf.data (), '\0');
- if ((strlen (rs->buf) + strlen (command) * 2 + 8/*misc*/)
+ if ((strlen (rs->buf.data ()) + strlen (command) * 2 + 8/*misc*/)
> get_remote_packet_size ())
error (_("\"monitor\" command ``%s'' is too long."), command);
/* XXX - see also remote_get_noisy_reply(). */
QUIT; /* Allow user to bail out with ^C. */
rs->buf[0] = '\0';
- if (getpkt_sane (&rs->buf, &rs->buf_size, 0) == -1)
+ if (getpkt_sane (&rs->buf, 0) == -1)
{
/* Timeout. Continue to (try to) read responses.
This is better than stopping with an error, assuming the stub
an effect similar to stop on timeout. */
continue;
}
- buf = rs->buf;
+ buf = rs->buf.data ();
if (buf[0] == '\0')
error (_("Target does not support this command."));
if (buf[0] == 'O' && buf[1] != 'K')
{
std::vector<mem_region> result;
gdb::optional<gdb::char_vector> text
- = target_read_stralloc (target_stack, TARGET_OBJECT_MEMORY_MAP, NULL);
+ = target_read_stralloc (current_top_target (), TARGET_OBJECT_MEMORY_MAP, NULL);
if (text)
result = parse_memory_map (text->data ());
static void
packet_command (const char *args, int from_tty)
{
- struct remote_state *rs = get_remote_state ();
+ remote_target *remote = get_current_remote_target ();
- if (!rs->remote_desc)
+ if (remote == nullptr)
error (_("command can only be used with remote target"));
+ remote->packet_command (args, from_tty);
+}
+
+void
+remote_target::packet_command (const char *args, int from_tty)
+{
if (!args)
error (_("remote-packet command requires packet text as argument"));
puts_filtered ("\n");
putpkt (args);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ remote_state *rs = get_remote_state ();
+
+ getpkt (&rs->buf, 0);
puts_filtered ("received: ");
- print_packet (rs->buf);
+ print_packet (rs->buf.data ());
puts_filtered ("\n");
}
threadalive_test (const char *cmd, int tty)
{
int sample_thread = SAMPLE_THREAD;
- int pid = ptid_get_pid (inferior_ptid);
- ptid_t ptid = ptid_build (pid, sample_thread, 0);
+ int pid = inferior_ptid.pid ();
+ ptid_t ptid = ptid_t (pid, sample_thread, 0);
if (remote_thread_alive (ptid))
printf_filtered ("PASS: Thread alive test\n");
{
char hexid[20];
- pack_threadid (&hexid[0], ref); /* Convert threead id into hex. */
+ pack_threadid (&hexid[0], ref); /* Convert thread id into hex. */
hexid[16] = 0;
printf_filtered ("%s %s\n", title, (&hexid[0]));
}
{
add_com ("tlist", class_obscure, threadlist_test_cmd,
_("Fetch and print the remote list of "
- "thread identifiers, one pkt only"));
+ "thread identifiers, one pkt only."));
add_com ("tinfo", class_obscure, threadinfo_test_cmd,
- _("Fetch and display info about one thread"));
+ _("Fetch and display info about one thread."));
add_com ("tset", class_obscure, threadset_test_cmd,
- _("Test setting to a different thread"));
+ _("Test setting to a different thread."));
add_com ("tupd", class_obscure, threadlist_update_test_cmd,
- _("Iterate through updating all remote thread info"));
+ _("Iterate through updating all remote thread info."));
add_com ("talive", class_obscure, threadalive_test,
- _(" Remote thread alive test "));
+ _("Remote thread alive test."));
}
#endif /* 0 */
-/* Convert a thread ID to a string. Returns the string in a static
- buffer. */
+/* Convert a thread ID to a string. */
-const char *
+std::string
remote_target::pid_to_str (ptid_t ptid)
{
- static char buf[64];
struct remote_state *rs = get_remote_state ();
- if (ptid_equal (ptid, null_ptid))
+ if (ptid == null_ptid)
return normal_pid_to_str (ptid);
- else if (ptid_is_pid (ptid))
+ else if (ptid.is_pid ())
{
/* Printing an inferior target id. */
attached to a process, and reporting yes to qAttached, hence
no smart special casing here. */
if (!remote_multi_process_p (rs))
- {
- xsnprintf (buf, sizeof buf, "Remote target");
- return buf;
- }
+ return "Remote target";
return normal_pid_to_str (ptid);
}
else
{
- if (ptid_equal (magic_null_ptid, ptid))
- xsnprintf (buf, sizeof buf, "Thread <main>");
+ if (magic_null_ptid == ptid)
+ return "Thread <main>";
else if (remote_multi_process_p (rs))
- if (ptid_get_lwp (ptid) == 0)
+ if (ptid.lwp () == 0)
return normal_pid_to_str (ptid);
else
- xsnprintf (buf, sizeof buf, "Thread %d.%ld",
- ptid_get_pid (ptid), ptid_get_lwp (ptid));
+ return string_printf ("Thread %d.%ld",
+ ptid.pid (), ptid.lwp ());
else
- xsnprintf (buf, sizeof buf, "Thread %ld",
- ptid_get_lwp (ptid));
- return buf;
+ return string_printf ("Thread %ld", ptid.lwp ());
}
}
if (packet_support (PACKET_qGetTLSAddr) != PACKET_DISABLE)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- char *endp = rs->buf + get_remote_packet_size ();
+ char *p = rs->buf.data ();
+ char *endp = p + get_remote_packet_size ();
enum packet_result result;
strcpy (p, "qGetTLSAddr:");
*p++ = '\0';
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
result = packet_ok (rs->buf,
&remote_protocol_packets[PACKET_qGetTLSAddr]);
if (result == PACKET_OK)
{
- ULONGEST result;
+ ULONGEST addr;
- unpack_varlen_hex (rs->buf, &result);
- return result;
+ unpack_varlen_hex (rs->buf.data (), &addr);
+ return addr;
}
else if (result == PACKET_UNKNOWN)
throw_error (TLS_GENERIC_ERROR,
if (packet_support (PACKET_qGetTIBAddr) != PACKET_DISABLE)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- char *endp = rs->buf + get_remote_packet_size ();
+ char *p = rs->buf.data ();
+ char *endp = p + get_remote_packet_size ();
enum packet_result result;
strcpy (p, "qGetTIBAddr:");
*p++ = '\0';
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
result = packet_ok (rs->buf,
&remote_protocol_packets[PACKET_qGetTIBAddr]);
if (result == PACKET_OK)
{
- ULONGEST result;
-
- unpack_varlen_hex (rs->buf, &result);
+ ULONGEST val;
+ unpack_varlen_hex (rs->buf.data (), &val);
if (addr)
- *addr = (CORE_ADDR) result;
+ *addr = (CORE_ADDR) val;
return true;
}
else if (result == PACKET_UNKNOWN)
struct remote_g_packet_guess
{
+ remote_g_packet_guess (int bytes_, const struct target_desc *tdesc_)
+ : bytes (bytes_),
+ tdesc (tdesc_)
+ {
+ }
+
int bytes;
const struct target_desc *tdesc;
};
-typedef struct remote_g_packet_guess remote_g_packet_guess_s;
-DEF_VEC_O(remote_g_packet_guess_s);
-struct remote_g_packet_data
+struct remote_g_packet_data : public allocate_on_obstack
{
- VEC(remote_g_packet_guess_s) *guesses;
+ std::vector<remote_g_packet_guess> guesses;
};
static struct gdbarch_data *remote_g_packet_data_handle;
static void *
remote_g_packet_data_init (struct obstack *obstack)
{
- return OBSTACK_ZALLOC (obstack, struct remote_g_packet_data);
+ return new (obstack) remote_g_packet_data;
}
void
struct remote_g_packet_data *data
= ((struct remote_g_packet_data *)
gdbarch_data (gdbarch, remote_g_packet_data_handle));
- struct remote_g_packet_guess new_guess, *guess;
- int ix;
gdb_assert (tdesc != NULL);
- for (ix = 0;
- VEC_iterate (remote_g_packet_guess_s, data->guesses, ix, guess);
- ix++)
- if (guess->bytes == bytes)
+ for (const remote_g_packet_guess &guess : data->guesses)
+ if (guess.bytes == bytes)
internal_error (__FILE__, __LINE__,
_("Duplicate g packet description added for size %d"),
bytes);
- new_guess.bytes = bytes;
- new_guess.tdesc = tdesc;
- VEC_safe_push (remote_g_packet_guess_s, data->guesses, &new_guess);
+ data->guesses.emplace_back (bytes, tdesc);
}
-/* Return 1 if remote_read_description would do anything on this target
- and architecture, 0 otherwise. */
+/* Return true if remote_read_description would do anything on this target
+ and architecture, false otherwise. */
-static int
+static bool
remote_read_description_p (struct target_ops *target)
{
struct remote_g_packet_data *data
= ((struct remote_g_packet_data *)
gdbarch_data (target_gdbarch (), remote_g_packet_data_handle));
- if (!VEC_empty (remote_g_packet_guess_s, data->guesses))
- return 1;
-
- return 0;
+ return !data->guesses.empty ();
}
const struct target_desc *
/* Do not try this during initial connection, when we do not know
whether there is a running but stopped thread. */
- if (!target_has_execution || ptid_equal (inferior_ptid, null_ptid))
- return beneath->read_description ();
+ if (!target_has_execution || inferior_ptid == null_ptid)
+ return beneath ()->read_description ();
- if (!VEC_empty (remote_g_packet_guess_s, data->guesses))
+ if (!data->guesses.empty ())
{
- struct remote_g_packet_guess *guess;
- int ix;
int bytes = send_g_packet ();
- for (ix = 0;
- VEC_iterate (remote_g_packet_guess_s, data->guesses, ix, guess);
- ix++)
- if (guess->bytes == bytes)
- return guess->tdesc;
+ for (const remote_g_packet_guess &guess : data->guesses)
+ if (guess.bytes == bytes)
+ return guess.tdesc;
/* We discard the g packet. A minor optimization would be to
hold on to it, and fill the register cache once we have selected
an architecture, but it's too tricky to do safely. */
}
- return beneath->read_description ();
+ return beneath ()->read_description ();
}
/* Remote file transfer support. This is host-initiated I/O, not
the packet buffer and *ATTACHMENT_LEN will be set to the
attachment's length. */
-static int
-remote_hostio_send_command (int command_bytes, int which_packet,
- int *remote_errno, char **attachment,
- int *attachment_len)
+int
+remote_target::remote_hostio_send_command (int command_bytes, int which_packet,
+ int *remote_errno, char **attachment,
+ int *attachment_len)
{
struct remote_state *rs = get_remote_state ();
int ret, bytes_read;
return -1;
}
- putpkt_binary (rs->buf, command_bytes);
- bytes_read = getpkt_sane (&rs->buf, &rs->buf_size, 0);
+ putpkt_binary (rs->buf.data (), command_bytes);
+ bytes_read = getpkt_sane (&rs->buf, 0);
/* If it timed out, something is wrong. Don't try to parse the
buffer. */
break;
}
- if (remote_hostio_parse_result (rs->buf, &ret, remote_errno,
+ if (remote_hostio_parse_result (rs->buf.data (), &ret, remote_errno,
&attachment_tmp))
{
*remote_errno = FILEIO_EINVAL;
if (attachment_tmp != NULL)
{
*attachment = attachment_tmp;
- *attachment_len = bytes_read - (*attachment - rs->buf);
+ *attachment_len = bytes_read - (*attachment - rs->buf.data ());
}
return ret;
}
-/* Invalidate the readahead cache. */
+/* See declaration.h. */
-static void
-readahead_cache_invalidate (void)
+void
+readahead_cache::invalidate ()
{
- struct remote_state *rs = get_remote_state ();
-
- rs->readahead_cache.fd = -1;
+ this->fd = -1;
}
-/* Invalidate the readahead cache if it is holding data for FD. */
+/* See declaration.h. */
-static void
-readahead_cache_invalidate_fd (int fd)
+void
+readahead_cache::invalidate_fd (int fd)
{
- struct remote_state *rs = get_remote_state ();
-
- if (rs->readahead_cache.fd == fd)
- rs->readahead_cache.fd = -1;
+ if (this->fd == fd)
+ this->fd = -1;
}
/* Set the filesystem remote_hostio functions that take FILENAME
arguments will use. Return 0 on success, or -1 if an error
occurs (and set *REMOTE_ERRNO). */
-static int
-remote_hostio_set_filesystem (struct inferior *inf, int *remote_errno)
+int
+remote_target::remote_hostio_set_filesystem (struct inferior *inf,
+ int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
int required_pid = (inf == NULL || inf->fake_pid_p) ? 0 : inf->pid;
- char *p = rs->buf;
+ char *p = rs->buf.data ();
int left = get_remote_packet_size () - 1;
char arg[9];
int ret;
xsnprintf (arg, sizeof (arg), "%x", required_pid);
remote_buffer_add_string (&p, &left, arg);
- ret = remote_hostio_send_command (p - rs->buf, PACKET_vFile_setfs,
+ ret = remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_setfs,
remote_errno, NULL, NULL);
if (packet_support (PACKET_vFile_setfs) == PACKET_DISABLE)
/* Implementation of to_fileio_open. */
-static int
-remote_hostio_open (struct target_ops *self,
- struct inferior *inf, const char *filename,
- int flags, int mode, int warn_if_slow,
- int *remote_errno)
+int
+remote_target::remote_hostio_open (inferior *inf, const char *filename,
+ int flags, int mode, int warn_if_slow,
+ int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
int left = get_remote_packet_size () - 1;
if (warn_if_slow)
remote_buffer_add_int (&p, &left, mode);
- return remote_hostio_send_command (p - rs->buf, PACKET_vFile_open,
+ return remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_open,
remote_errno, NULL, NULL);
}
int flags, int mode, int warn_if_slow,
int *remote_errno)
{
- return remote_hostio_open (this, inf, filename, flags, mode, warn_if_slow,
+ return remote_hostio_open (inf, filename, flags, mode, warn_if_slow,
remote_errno);
}
/* Implementation of to_fileio_pwrite. */
-static int
-remote_hostio_pwrite (struct target_ops *self,
- int fd, const gdb_byte *write_buf, int len,
- ULONGEST offset, int *remote_errno)
+int
+remote_target::remote_hostio_pwrite (int fd, const gdb_byte *write_buf, int len,
+ ULONGEST offset, int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
int left = get_remote_packet_size ();
int out_len;
- readahead_cache_invalidate_fd (fd);
+ rs->readahead_cache.invalidate_fd (fd);
remote_buffer_add_string (&p, &left, "vFile:pwrite:");
remote_buffer_add_string (&p, &left, ",");
p += remote_escape_output (write_buf, len, 1, (gdb_byte *) p, &out_len,
- get_remote_packet_size () - (p - rs->buf));
+ (get_remote_packet_size ()
+ - (p - rs->buf.data ())));
- return remote_hostio_send_command (p - rs->buf, PACKET_vFile_pwrite,
+ return remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_pwrite,
remote_errno, NULL, NULL);
}
remote_target::fileio_pwrite (int fd, const gdb_byte *write_buf, int len,
ULONGEST offset, int *remote_errno)
{
- return remote_hostio_pwrite (this, fd, write_buf, len, offset, remote_errno);
+ return remote_hostio_pwrite (fd, write_buf, len, offset, remote_errno);
}
/* Helper for the implementation of to_fileio_pread. Read the file
from the remote side with vFile:pread. */
-static int
-remote_hostio_pread_vFile (struct target_ops *self,
- int fd, gdb_byte *read_buf, int len,
- ULONGEST offset, int *remote_errno)
+int
+remote_target::remote_hostio_pread_vFile (int fd, gdb_byte *read_buf, int len,
+ ULONGEST offset, int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
char *attachment;
int left = get_remote_packet_size ();
int ret, attachment_len;
remote_buffer_add_int (&p, &left, offset);
- ret = remote_hostio_send_command (p - rs->buf, PACKET_vFile_pread,
+ ret = remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_pread,
remote_errno, &attachment,
&attachment_len);
return ret;
}
-/* Serve pread from the readahead cache. Returns number of bytes
- read, or 0 if the request can't be served from the cache. */
+/* See declaration.h. */
-static int
-remote_hostio_pread_from_cache (struct remote_state *rs,
- int fd, gdb_byte *read_buf, size_t len,
- ULONGEST offset)
+int
+readahead_cache::pread (int fd, gdb_byte *read_buf, size_t len,
+ ULONGEST offset)
{
- struct readahead_cache *cache = &rs->readahead_cache;
-
- if (cache->fd == fd
- && cache->offset <= offset
- && offset < cache->offset + cache->bufsize)
+ if (this->fd == fd
+ && this->offset <= offset
+ && offset < this->offset + this->bufsize)
{
- ULONGEST max = cache->offset + cache->bufsize;
+ ULONGEST max = this->offset + this->bufsize;
if (offset + len > max)
len = max - offset;
- memcpy (read_buf, cache->buf + offset - cache->offset, len);
+ memcpy (read_buf, this->buf + offset - this->offset, len);
return len;
}
/* Implementation of to_fileio_pread. */
-static int
-remote_hostio_pread (struct target_ops *self,
- int fd, gdb_byte *read_buf, int len,
- ULONGEST offset, int *remote_errno)
+int
+remote_target::remote_hostio_pread (int fd, gdb_byte *read_buf, int len,
+ ULONGEST offset, int *remote_errno)
{
int ret;
struct remote_state *rs = get_remote_state ();
- struct readahead_cache *cache = &rs->readahead_cache;
+ readahead_cache *cache = &rs->readahead_cache;
- ret = remote_hostio_pread_from_cache (rs, fd, read_buf, len, offset);
+ ret = cache->pread (fd, read_buf, len, offset);
if (ret > 0)
{
cache->hit_count++;
cache->bufsize = get_remote_packet_size ();
cache->buf = (gdb_byte *) xrealloc (cache->buf, cache->bufsize);
- ret = remote_hostio_pread_vFile (self, cache->fd, cache->buf, cache->bufsize,
+ ret = remote_hostio_pread_vFile (cache->fd, cache->buf, cache->bufsize,
cache->offset, remote_errno);
if (ret <= 0)
{
- readahead_cache_invalidate_fd (fd);
+ cache->invalidate_fd (fd);
return ret;
}
cache->bufsize = ret;
- return remote_hostio_pread_from_cache (rs, fd, read_buf, len, offset);
+ return cache->pread (fd, read_buf, len, offset);
}
int
remote_target::fileio_pread (int fd, gdb_byte *read_buf, int len,
ULONGEST offset, int *remote_errno)
{
- return remote_hostio_pread (this, fd, read_buf, len, offset, remote_errno);
+ return remote_hostio_pread (fd, read_buf, len, offset, remote_errno);
}
/* Implementation of to_fileio_close. */
-static int
-remote_hostio_close (struct target_ops *self, int fd, int *remote_errno)
+int
+remote_target::remote_hostio_close (int fd, int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
int left = get_remote_packet_size () - 1;
- readahead_cache_invalidate_fd (fd);
+ rs->readahead_cache.invalidate_fd (fd);
remote_buffer_add_string (&p, &left, "vFile:close:");
remote_buffer_add_int (&p, &left, fd);
- return remote_hostio_send_command (p - rs->buf, PACKET_vFile_close,
+ return remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_close,
remote_errno, NULL, NULL);
}
int
remote_target::fileio_close (int fd, int *remote_errno)
{
- return remote_hostio_close (this, fd, remote_errno);
+ return remote_hostio_close (fd, remote_errno);
}
/* Implementation of to_fileio_unlink. */
-static int
-remote_hostio_unlink (struct target_ops *self,
- struct inferior *inf, const char *filename,
- int *remote_errno)
+int
+remote_target::remote_hostio_unlink (inferior *inf, const char *filename,
+ int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
int left = get_remote_packet_size () - 1;
if (remote_hostio_set_filesystem (inf, remote_errno) != 0)
remote_buffer_add_bytes (&p, &left, (const gdb_byte *) filename,
strlen (filename));
- return remote_hostio_send_command (p - rs->buf, PACKET_vFile_unlink,
+ return remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_unlink,
remote_errno, NULL, NULL);
}
remote_target::fileio_unlink (struct inferior *inf, const char *filename,
int *remote_errno)
{
- return remote_hostio_unlink (this, inf, filename, remote_errno);
+ return remote_hostio_unlink (inf, filename, remote_errno);
}
/* Implementation of to_fileio_readlink. */
int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
char *attachment;
int left = get_remote_packet_size ();
int len, attachment_len;
remote_buffer_add_bytes (&p, &left, (const gdb_byte *) filename,
strlen (filename));
- len = remote_hostio_send_command (p - rs->buf, PACKET_vFile_readlink,
+ len = remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_readlink,
remote_errno, &attachment,
&attachment_len);
remote_target::fileio_fstat (int fd, struct stat *st, int *remote_errno)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
+ char *p = rs->buf.data ();
int left = get_remote_packet_size ();
int attachment_len, ret;
char *attachment;
remote_buffer_add_int (&p, &left, fd);
- ret = remote_hostio_send_command (p - rs->buf, PACKET_vFile_fstat,
+ ret = remote_hostio_send_command (p - rs->buf.data (), PACKET_vFile_fstat,
remote_errno, &attachment,
&attachment_len);
if (ret < 0)
/* Try opening a file to probe support. The supplied
filename is irrelevant, we only care about whether
the stub recognizes the packet or not. */
- fd = remote_hostio_open (this, NULL, "just probing",
+ fd = remote_hostio_open (NULL, "just probing",
FILEIO_O_RDONLY, 0700, 0,
&remote_errno);
if (fd >= 0)
- remote_hostio_close (this, fd, &remote_errno);
+ remote_hostio_close (fd, &remote_errno);
ps = packet_support (PACKET_vFile_open);
}
error (_("Remote I/O error: %s"), safe_strerror (host_error));
}
-static void
-remote_hostio_close_cleanup (void *opaque)
+/* A RAII wrapper around a remote file descriptor. */
+
+class scoped_remote_fd
{
- int fd = *(int *) opaque;
- int remote_errno;
+public:
+ scoped_remote_fd (remote_target *remote, int fd)
+ : m_remote (remote), m_fd (fd)
+ {
+ }
- remote_hostio_close (find_target_at (process_stratum), fd, &remote_errno);
-}
+ ~scoped_remote_fd ()
+ {
+ if (m_fd != -1)
+ {
+ try
+ {
+ int remote_errno;
+ m_remote->remote_hostio_close (m_fd, &remote_errno);
+ }
+ catch (...)
+ {
+ /* Swallow exception before it escapes the dtor. If
+ something goes wrong, likely the connection is gone,
+ and there's nothing else that can be done. */
+ }
+ }
+ }
+
+ DISABLE_COPY_AND_ASSIGN (scoped_remote_fd);
+
+ /* Release ownership of the file descriptor, and return it. */
+ ATTRIBUTE_UNUSED_RESULT int release () noexcept
+ {
+ int fd = m_fd;
+ m_fd = -1;
+ return fd;
+ }
+
+ /* Return the owned file descriptor. */
+ int get () const noexcept
+ {
+ return m_fd;
+ }
+
+private:
+ /* The remote target. */
+ remote_target *m_remote;
+
+ /* The owned remote I/O file descriptor. */
+ int m_fd;
+};
void
remote_file_put (const char *local_file, const char *remote_file, int from_tty)
{
- struct cleanup *back_to, *close_cleanup;
- int retcode, fd, remote_errno, bytes, io_size;
- gdb_byte *buffer;
+ remote_target *remote = get_current_remote_target ();
+
+ if (remote == nullptr)
+ error (_("command can only be used with remote target"));
+
+ remote->remote_file_put (local_file, remote_file, from_tty);
+}
+
+void
+remote_target::remote_file_put (const char *local_file, const char *remote_file,
+ int from_tty)
+{
+ int retcode, remote_errno, bytes, io_size;
int bytes_in_buffer;
int saw_eof;
ULONGEST offset;
- struct remote_state *rs = get_remote_state ();
-
- if (!rs->remote_desc)
- error (_("command can only be used with remote target"));
gdb_file_up file = gdb_fopen_cloexec (local_file, "rb");
if (file == NULL)
perror_with_name (local_file);
- fd = remote_hostio_open (find_target_at (process_stratum), NULL,
- remote_file, (FILEIO_O_WRONLY | FILEIO_O_CREAT
- | FILEIO_O_TRUNC),
- 0700, 0, &remote_errno);
- if (fd == -1)
+ scoped_remote_fd fd
+ (this, remote_hostio_open (NULL,
+ remote_file, (FILEIO_O_WRONLY | FILEIO_O_CREAT
+ | FILEIO_O_TRUNC),
+ 0700, 0, &remote_errno));
+ if (fd.get () == -1)
remote_hostio_error (remote_errno);
/* Send up to this many bytes at once. They won't all fit in the
remote packet limit, so we'll transfer slightly fewer. */
io_size = get_remote_packet_size ();
- buffer = (gdb_byte *) xmalloc (io_size);
- back_to = make_cleanup (xfree, buffer);
-
- close_cleanup = make_cleanup (remote_hostio_close_cleanup, &fd);
+ gdb::byte_vector buffer (io_size);
bytes_in_buffer = 0;
saw_eof = 0;
{
if (!saw_eof)
{
- bytes = fread (buffer + bytes_in_buffer, 1,
+ bytes = fread (buffer.data () + bytes_in_buffer, 1,
io_size - bytes_in_buffer,
file.get ());
if (bytes == 0)
bytes += bytes_in_buffer;
bytes_in_buffer = 0;
- retcode = remote_hostio_pwrite (find_target_at (process_stratum),
- fd, buffer, bytes,
+ retcode = remote_hostio_pwrite (fd.get (), buffer.data (), bytes,
offset, &remote_errno);
if (retcode < 0)
/* Short write. Save the rest of the read data for the next
write. */
bytes_in_buffer = bytes - retcode;
- memmove (buffer, buffer + retcode, bytes_in_buffer);
+ memmove (buffer.data (), buffer.data () + retcode, bytes_in_buffer);
}
offset += retcode;
}
- discard_cleanups (close_cleanup);
- if (remote_hostio_close (find_target_at (process_stratum), fd, &remote_errno))
+ if (remote_hostio_close (fd.release (), &remote_errno))
remote_hostio_error (remote_errno);
if (from_tty)
printf_filtered (_("Successfully sent file \"%s\".\n"), local_file);
- do_cleanups (back_to);
}
void
remote_file_get (const char *remote_file, const char *local_file, int from_tty)
{
- struct cleanup *back_to, *close_cleanup;
- int fd, remote_errno, bytes, io_size;
- gdb_byte *buffer;
- ULONGEST offset;
- struct remote_state *rs = get_remote_state ();
+ remote_target *remote = get_current_remote_target ();
- if (!rs->remote_desc)
+ if (remote == nullptr)
error (_("command can only be used with remote target"));
- fd = remote_hostio_open (find_target_at (process_stratum), NULL,
- remote_file, FILEIO_O_RDONLY, 0, 0,
- &remote_errno);
- if (fd == -1)
+ remote->remote_file_get (remote_file, local_file, from_tty);
+}
+
+void
+remote_target::remote_file_get (const char *remote_file, const char *local_file,
+ int from_tty)
+{
+ int remote_errno, bytes, io_size;
+ ULONGEST offset;
+
+ scoped_remote_fd fd
+ (this, remote_hostio_open (NULL,
+ remote_file, FILEIO_O_RDONLY, 0, 0,
+ &remote_errno));
+ if (fd.get () == -1)
remote_hostio_error (remote_errno);
gdb_file_up file = gdb_fopen_cloexec (local_file, "wb");
/* Send up to this many bytes at once. They won't all fit in the
remote packet limit, so we'll transfer slightly fewer. */
io_size = get_remote_packet_size ();
- buffer = (gdb_byte *) xmalloc (io_size);
- back_to = make_cleanup (xfree, buffer);
-
- close_cleanup = make_cleanup (remote_hostio_close_cleanup, &fd);
+ gdb::byte_vector buffer (io_size);
offset = 0;
while (1)
{
- bytes = remote_hostio_pread (find_target_at (process_stratum),
- fd, buffer, io_size, offset, &remote_errno);
+ bytes = remote_hostio_pread (fd.get (), buffer.data (), io_size, offset,
+ &remote_errno);
if (bytes == 0)
/* Success, but no bytes, means end-of-file. */
break;
offset += bytes;
- bytes = fwrite (buffer, 1, bytes, file.get ());
+ bytes = fwrite (buffer.data (), 1, bytes, file.get ());
if (bytes == 0)
perror_with_name (local_file);
}
- discard_cleanups (close_cleanup);
- if (remote_hostio_close (find_target_at (process_stratum), fd, &remote_errno))
+ if (remote_hostio_close (fd.release (), &remote_errno))
remote_hostio_error (remote_errno);
if (from_tty)
printf_filtered (_("Successfully fetched file \"%s\".\n"), remote_file);
- do_cleanups (back_to);
}
void
remote_file_delete (const char *remote_file, int from_tty)
{
- int retcode, remote_errno;
- struct remote_state *rs = get_remote_state ();
+ remote_target *remote = get_current_remote_target ();
- if (!rs->remote_desc)
+ if (remote == nullptr)
error (_("command can only be used with remote target"));
- retcode = remote_hostio_unlink (find_target_at (process_stratum),
- NULL, remote_file, &remote_errno);
+ remote->remote_file_delete (remote_file, from_tty);
+}
+
+void
+remote_target::remote_file_delete (const char *remote_file, int from_tty)
+{
+ int retcode, remote_errno;
+
+ retcode = remote_hostio_unlink (NULL, remote_file, &remote_errno);
if (retcode == -1)
remote_hostio_error (remote_errno);
putpkt ("QTinit");
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK") != 0)
+ if (strcmp (rs->buf.data (), "OK") != 0)
error (_("Target does not support this command."));
}
/* Recursive routine to walk through command list including loops, and
download packets for each command. */
-static void
-remote_download_command_source (int num, ULONGEST addr,
- struct command_line *cmds)
+void
+remote_target::remote_download_command_source (int num, ULONGEST addr,
+ struct command_line *cmds)
{
struct remote_state *rs = get_remote_state ();
struct command_line *cmd;
for (cmd = cmds; cmd; cmd = cmd->next)
{
QUIT; /* Allow user to bail out with ^C. */
- strcpy (rs->buf, "QTDPsrc:");
+ strcpy (rs->buf.data (), "QTDPsrc:");
encode_source_string (num, addr, "cmd", cmd->line,
- rs->buf + strlen (rs->buf),
- rs->buf_size - strlen (rs->buf));
+ rs->buf.data () + strlen (rs->buf.data ()),
+ rs->buf.size () - strlen (rs->buf.data ()));
putpkt (rs->buf);
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
+ if (strcmp (rs->buf.data (), "OK"))
warning (_("Target does not support source download."));
if (cmd->control_type == while_control
remote_download_command_source (num, addr, cmd->body_list_0.get ());
QUIT; /* Allow user to bail out with ^C. */
- strcpy (rs->buf, "QTDPsrc:");
+ strcpy (rs->buf.data (), "QTDPsrc:");
encode_source_string (num, addr, "cmd", "end",
- rs->buf + strlen (rs->buf),
- rs->buf_size - strlen (rs->buf));
+ rs->buf.data () + strlen (rs->buf.data ()),
+ rs->buf.size () - strlen (rs->buf.data ()));
putpkt (rs->buf);
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
+ if (strcmp (rs->buf.data (), "OK"))
warning (_("Target does not support source download."));
}
}
void
remote_target::download_tracepoint (struct bp_location *loc)
{
-#define BUF_SIZE 2048
-
CORE_ADDR tpaddr;
char addrbuf[40];
- char buf[BUF_SIZE];
std::vector<std::string> tdp_actions;
std::vector<std::string> stepping_actions;
char *pkt;
struct breakpoint *b = loc->owner;
struct tracepoint *t = (struct tracepoint *) b;
struct remote_state *rs = get_remote_state ();
+ int ret;
+ const char *err_msg = _("Tracepoint packet too large for target.");
+ size_t size_left;
+
+ /* We use a buffer other than rs->buf because we'll build strings
+ across multiple statements, and other statements in between could
+ modify rs->buf. */
+ gdb::char_vector buf (get_remote_packet_size ());
encode_actions_rsp (loc, &tdp_actions, &stepping_actions);
tpaddr = loc->address;
sprintf_vma (addrbuf, tpaddr);
- xsnprintf (buf, BUF_SIZE, "QTDP:%x:%s:%c:%lx:%x", b->number,
- addrbuf, /* address */
- (b->enable_state == bp_enabled ? 'E' : 'D'),
- t->step_count, t->pass_count);
+ ret = snprintf (buf.data (), buf.size (), "QTDP:%x:%s:%c:%lx:%x",
+ b->number, addrbuf, /* address */
+ (b->enable_state == bp_enabled ? 'E' : 'D'),
+ t->step_count, t->pass_count);
+
+ if (ret < 0 || ret >= buf.size ())
+ error ("%s", err_msg);
+
/* Fast tracepoints are mostly handled by the target, but we can
tell the target how big of an instruction block should be moved
around. */
{
if (gdbarch_fast_tracepoint_valid_at (loc->gdbarch, tpaddr,
NULL))
- xsnprintf (buf + strlen (buf), BUF_SIZE - strlen (buf), ":F%x",
- gdb_insn_length (loc->gdbarch, tpaddr));
+ {
+ size_left = buf.size () - strlen (buf.data ());
+ ret = snprintf (buf.data () + strlen (buf.data ()),
+ size_left, ":F%x",
+ gdb_insn_length (loc->gdbarch, tpaddr));
+
+ if (ret < 0 || ret >= size_left)
+ error ("%s", err_msg);
+ }
else
/* If it passed validation at definition but fails now,
something is very wrong. */
struct static_tracepoint_marker marker;
if (target_static_tracepoint_marker_at (tpaddr, &marker))
- strcat (buf, ":S");
+ {
+ size_left = buf.size () - strlen (buf.data ());
+ ret = snprintf (buf.data () + strlen (buf.data ()),
+ size_left, ":S");
+
+ if (ret < 0 || ret >= size_left)
+ error ("%s", err_msg);
+ }
else
error (_("Static tracepoint not valid during download"));
}
capabilities at definition time. */
if (remote_supports_cond_tracepoints ())
{
- agent_expr_up aexpr = gen_eval_for_expr (tpaddr, loc->cond.get ());
- xsnprintf (buf + strlen (buf), BUF_SIZE - strlen (buf), ":X%x,",
- aexpr->len);
- pkt = buf + strlen (buf);
+ agent_expr_up aexpr = gen_eval_for_expr (tpaddr,
+ loc->cond.get ());
+
+ size_left = buf.size () - strlen (buf.data ());
+
+ ret = snprintf (buf.data () + strlen (buf.data ()),
+ size_left, ":X%x,", aexpr->len);
+
+ if (ret < 0 || ret >= size_left)
+ error ("%s", err_msg);
+
+ size_left = buf.size () - strlen (buf.data ());
+
+ /* Two bytes to encode each aexpr byte, plus the terminating
+ null byte. */
+ if (aexpr->len * 2 + 1 > size_left)
+ error ("%s", err_msg);
+
+ pkt = buf.data () + strlen (buf.data ());
+
for (int ndx = 0; ndx < aexpr->len; ++ndx)
pkt = pack_hex_byte (pkt, aexpr->buf[ndx]);
*pkt = '\0';
}
if (b->commands || *default_collect)
- strcat (buf, "-");
- putpkt (buf);
+ {
+ size_left = buf.size () - strlen (buf.data ());
+
+ ret = snprintf (buf.data () + strlen (buf.data ()),
+ size_left, "-");
+
+ if (ret < 0 || ret >= size_left)
+ error ("%s", err_msg);
+ }
+
+ putpkt (buf.data ());
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
+ if (strcmp (rs->buf.data (), "OK"))
error (_("Target does not support tracepoints."));
/* do_single_steps (t); */
{
QUIT; /* Allow user to bail out with ^C. */
- bool has_more = (action_it != tdp_actions.end ()
+ bool has_more = ((action_it + 1) != tdp_actions.end ()
|| !stepping_actions.empty ());
- xsnprintf (buf, BUF_SIZE, "QTDP:-%x:%s:%s%c",
- b->number, addrbuf, /* address */
- action_it->c_str (),
- has_more ? '-' : 0);
- putpkt (buf);
+ ret = snprintf (buf.data (), buf.size (), "QTDP:-%x:%s:%s%c",
+ b->number, addrbuf, /* address */
+ action_it->c_str (),
+ has_more ? '-' : 0);
+
+ if (ret < 0 || ret >= buf.size ())
+ error ("%s", err_msg);
+
+ putpkt (buf.data ());
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
+ if (strcmp (rs->buf.data (), "OK"))
error (_("Error on target while setting tracepoints."));
}
- for (auto action_it = stepping_actions.begin ();
- action_it != stepping_actions.end (); action_it++)
- {
- QUIT; /* Allow user to bail out with ^C. */
-
- bool is_first = action_it == stepping_actions.begin ();
- bool has_more = action_it != stepping_actions.end ();
-
- xsnprintf (buf, BUF_SIZE, "QTDP:-%x:%s:%s%s%s",
- b->number, addrbuf, /* address */
- is_first ? "S" : "",
- action_it->c_str (),
- has_more ? "-" : "");
- putpkt (buf);
- remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
- error (_("Error on target while setting tracepoints."));
- }
+ for (auto action_it = stepping_actions.begin ();
+ action_it != stepping_actions.end (); action_it++)
+ {
+ QUIT; /* Allow user to bail out with ^C. */
+
+ bool is_first = action_it == stepping_actions.begin ();
+ bool has_more = (action_it + 1) != stepping_actions.end ();
+
+ ret = snprintf (buf.data (), buf.size (), "QTDP:-%x:%s:%s%s%s",
+ b->number, addrbuf, /* address */
+ is_first ? "S" : "",
+ action_it->c_str (),
+ has_more ? "-" : "");
+
+ if (ret < 0 || ret >= buf.size ())
+ error ("%s", err_msg);
+
+ putpkt (buf.data ());
+ remote_get_noisy_reply ();
+ if (strcmp (rs->buf.data (), "OK"))
+ error (_("Error on target while setting tracepoints."));
+ }
if (packet_support (PACKET_TracepointSource) == PACKET_ENABLE)
{
if (b->location != NULL)
{
- strcpy (buf, "QTDPsrc:");
+ ret = snprintf (buf.data (), buf.size (), "QTDPsrc:");
+
+ if (ret < 0 || ret >= buf.size ())
+ error ("%s", err_msg);
+
encode_source_string (b->number, loc->address, "at",
event_location_to_string (b->location.get ()),
- buf + strlen (buf), 2048 - strlen (buf));
- putpkt (buf);
+ buf.data () + strlen (buf.data ()),
+ buf.size () - strlen (buf.data ()));
+ putpkt (buf.data ());
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
+ if (strcmp (rs->buf.data (), "OK"))
warning (_("Target does not support source download."));
}
if (b->cond_string)
{
- strcpy (buf, "QTDPsrc:");
+ ret = snprintf (buf.data (), buf.size (), "QTDPsrc:");
+
+ if (ret < 0 || ret >= buf.size ())
+ error ("%s", err_msg);
+
encode_source_string (b->number, loc->address,
- "cond", b->cond_string, buf + strlen (buf),
- 2048 - strlen (buf));
- putpkt (buf);
+ "cond", b->cond_string,
+ buf.data () + strlen (buf.data ()),
+ buf.size () - strlen (buf.data ()));
+ putpkt (buf.data ());
remote_get_noisy_reply ();
- if (strcmp (rs->buf, "OK"))
+ if (strcmp (rs->buf.data (), "OK"))
warning (_("Target does not support source download."));
}
remote_download_command_source (b->number, loc->address,
struct remote_state *rs = get_remote_state ();
char *p;
- xsnprintf (rs->buf, get_remote_packet_size (), "QTDV:%x:%s:%x:",
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "QTDV:%x:%s:%x:",
tsv.number, phex ((ULONGEST) tsv.initial_value, 8),
tsv.builtin);
- p = rs->buf + strlen (rs->buf);
- if ((p - rs->buf) + tsv.name.length () * 2 >= get_remote_packet_size ())
+ p = rs->buf.data () + strlen (rs->buf.data ());
+ if ((p - rs->buf.data ()) + tsv.name.length () * 2
+ >= get_remote_packet_size ())
error (_("Trace state variable name too long for tsv definition packet"));
p += 2 * bin2hex ((gdb_byte *) (tsv.name.data ()), p, tsv.name.length ());
*p++ = '\0';
putpkt (rs->buf);
remote_get_noisy_reply ();
- if (*rs->buf == '\0')
+ if (rs->buf[0] == '\0')
error (_("Target does not support this command."));
- if (strcmp (rs->buf, "OK") != 0)
+ if (strcmp (rs->buf.data (), "OK") != 0)
error (_("Error on target while downloading trace state variable."));
}
char addr_buf[40];
sprintf_vma (addr_buf, location->address);
- xsnprintf (rs->buf, get_remote_packet_size (), "QTEnable:%x:%s",
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "QTEnable:%x:%s",
location->owner->number, addr_buf);
putpkt (rs->buf);
remote_get_noisy_reply ();
- if (*rs->buf == '\0')
+ if (rs->buf[0] == '\0')
error (_("Target does not support enabling tracepoints while a trace run is ongoing."));
- if (strcmp (rs->buf, "OK") != 0)
+ if (strcmp (rs->buf.data (), "OK") != 0)
error (_("Error on target while enabling tracepoint."));
}
char addr_buf[40];
sprintf_vma (addr_buf, location->address);
- xsnprintf (rs->buf, get_remote_packet_size (), "QTDisable:%x:%s",
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "QTDisable:%x:%s",
location->owner->number, addr_buf);
putpkt (rs->buf);
remote_get_noisy_reply ();
- if (*rs->buf == '\0')
+ if (rs->buf[0] == '\0')
error (_("Target does not support disabling tracepoints while a trace run is ongoing."));
- if (strcmp (rs->buf, "OK") != 0)
+ if (strcmp (rs->buf.data (), "OK") != 0)
error (_("Error on target while disabling tracepoint."));
}
remote_target::trace_set_readonly_regions ()
{
asection *s;
- bfd *abfd = NULL;
bfd_size_type size;
bfd_vma vma;
int anysecs = 0;
struct remote_state *rs = get_remote_state ();
- strcpy (rs->buf, "QTro");
- offset = strlen (rs->buf);
+ strcpy (rs->buf.data (), "QTro");
+ offset = strlen (rs->buf.data ());
for (s = exec_bfd->sections; s; s = s->next)
{
char tmp1[40], tmp2[40];
continue;
anysecs = 1;
- vma = bfd_get_section_vma (abfd, s);
- size = bfd_get_section_size (s);
+ vma = bfd_section_vma (s);
+ size = bfd_section_size (s);
sprintf_vma (tmp1, vma);
sprintf_vma (tmp2, vma + size);
sec_length = 1 + strlen (tmp1) + 1 + strlen (tmp2);
- if (offset + sec_length + 1 > rs->buf_size)
+ if (offset + sec_length + 1 > rs->buf.size ())
{
if (packet_support (PACKET_qXfer_traceframe_info) != PACKET_ENABLE)
warning (_("\
Too many sections for read-only sections definition packet."));
break;
}
- xsnprintf (rs->buf + offset, rs->buf_size - offset, ":%s,%s",
+ xsnprintf (rs->buf.data () + offset, rs->buf.size () - offset, ":%s,%s",
tmp1, tmp2);
offset += sec_length;
}
if (anysecs)
{
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
}
}
putpkt ("QTStart");
remote_get_noisy_reply ();
- if (*rs->buf == '\0')
+ if (rs->buf[0] == '\0')
error (_("Target does not support this command."));
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Bogus reply from target: %s"), rs->buf);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Bogus reply from target: %s"), rs->buf.data ());
}
int
{
/* Initialize it just to avoid a GCC false warning. */
char *p = NULL;
- /* FIXME we need to get register block size some other way. */
- extern int trace_regblock_size;
enum packet_result result;
struct remote_state *rs = get_remote_state ();
if (packet_support (PACKET_qTStatus) == PACKET_DISABLE)
return -1;
+ /* FIXME we need to get register block size some other way. */
trace_regblock_size
- = get_remote_arch_state (target_gdbarch ())->sizeof_g_packet;
+ = rs->get_remote_arch_state (target_gdbarch ())->sizeof_g_packet;
putpkt ("qTStatus");
- TRY
+ try
{
p = remote_get_noisy_reply ();
}
- CATCH (ex, RETURN_MASK_ERROR)
+ catch (const gdb_exception_error &ex)
{
if (ex.error != TARGET_CLOSE_ERROR)
{
exception_fprintf (gdb_stderr, ex, "qTStatus: ");
return -1;
}
- throw_exception (ex);
+ throw;
}
- END_CATCH
result = packet_ok (p, &remote_protocol_packets[PACKET_qTStatus]);
ts->filename = NULL;
if (*p++ != 'T')
- error (_("Bogus trace status reply from target: %s"), rs->buf);
+ error (_("Bogus trace status reply from target: %s"), rs->buf.data ());
/* Function 'parse_trace_status' sets default value of each field of
'ts' at first, so we don't have to do it here. */
any status. */
if (tp->number_on_target == 0)
continue;
- xsnprintf (rs->buf, size, "qTP:%x:%s", tp->number_on_target,
+ xsnprintf (rs->buf.data (), size, "qTP:%x:%s", tp->number_on_target,
phex_nz (loc->address, 0));
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
{
utp->hit_count = 0;
utp->traceframe_usage = 0;
- xsnprintf (rs->buf, size, "qTP:%x:%s", utp->number,
+ xsnprintf (rs->buf.data (), size, "qTP:%x:%s", utp->number,
phex_nz (utp->addr, 0));
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
putpkt ("QTStop");
remote_get_noisy_reply ();
- if (*rs->buf == '\0')
+ if (rs->buf[0] == '\0')
error (_("Target does not support this command."));
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Bogus reply from target: %s"), rs->buf);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Bogus reply from target: %s"), rs->buf.data ());
}
int
int *tpp)
{
struct remote_state *rs = get_remote_state ();
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *endbuf = rs->buf.data () + get_remote_packet_size ();
char *p, *reply;
int target_frameno = -1, target_tracept = -1;
if (type != tfind_number)
set_remote_traceframe ();
- p = rs->buf;
+ p = rs->buf.data ();
strcpy (p, "QTFrame:");
p = strchr (p, '\0');
switch (type)
set_remote_traceframe ();
- xsnprintf (rs->buf, get_remote_packet_size (), "qTV:%x", tsvnum);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "qTV:%x", tsvnum);
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
if (reply && *reply)
struct remote_state *rs = get_remote_state ();
char *p, *reply;
- p = rs->buf;
+ p = rs->buf.data ();
strcpy (p, "QTSave:");
p += strlen (p);
- if ((p - rs->buf) + strlen (filename) * 2 >= get_remote_packet_size ())
+ if ((p - rs->buf.data ()) + strlen (filename) * 2
+ >= get_remote_packet_size ())
error (_("Remote file name too long for trace save packet"));
p += 2 * bin2hex ((gdb_byte *) filename, p, strlen (filename));
*p++ = '\0';
char *p;
int rslt;
- p = rs->buf;
+ p = rs->buf.data ();
strcpy (p, "qTBuffer:");
p += strlen (p);
p += hexnumstr (p, offset);
{
char *reply;
- xsnprintf (rs->buf, get_remote_packet_size (), "QTDisconnected:%x", val);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
+ "QTDisconnected:%x", val);
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
if (*reply == '\0')
struct remote_state *rs = get_remote_state ();
char *reply;
- xsnprintf (rs->buf, get_remote_packet_size (), "QTBuffer:circular:%x", val);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (),
+ "QTBuffer:circular:%x", val);
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
if (*reply == '\0')
remote_target::traceframe_info ()
{
gdb::optional<gdb::char_vector> text
- = target_read_stralloc (target_stack, TARGET_OBJECT_TRACEFRAME_INFO,
+ = target_read_stralloc (current_top_target (), TARGET_OBJECT_TRACEFRAME_INFO,
NULL);
if (text)
return parse_traceframe_info (text->data ());
/* Make sure the remote is pointing at the right process. */
set_general_process ();
- xsnprintf (rs->buf, get_remote_packet_size (), "qTMinFTPILen");
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "qTMinFTPILen");
putpkt (rs->buf);
reply = remote_get_noisy_reply ();
if (*reply == '\0')
if (packet_support (PACKET_QTBuffer_size) != PACKET_DISABLE)
{
struct remote_state *rs = get_remote_state ();
- char *buf = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *buf = rs->buf.data ();
+ char *endbuf = buf + get_remote_packet_size ();
enum packet_result result;
gdb_assert (val >= 0 || val == -1);
&remote_protocol_packets[PACKET_QTBuffer_size]);
if (result != PACKET_OK)
- warning (_("Bogus reply from target: %s"), rs->buf);
+ warning (_("Bogus reply from target: %s"), rs->buf.data ());
}
}
{
struct remote_state *rs = get_remote_state ();
char *reply;
- char *buf = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *buf = rs->buf.data ();
+ char *endbuf = buf + get_remote_packet_size ();
int nbytes;
buf += xsnprintf (buf, endbuf - buf, "QTNotes:");
struct remote_state *rs = get_remote_state ();
/* If the stub supports QAgent. */
- xsnprintf (rs->buf, get_remote_packet_size (), "QAgent:%d", use);
+ xsnprintf (rs->buf.data (), get_remote_packet_size (), "QAgent:%d", use);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
- if (strcmp (rs->buf, "OK") == 0)
+ if (strcmp (rs->buf.data (), "OK") == 0)
{
::use_agent = use;
return true;
/* Reset our idea of our target's btrace configuration. */
static void
-remote_btrace_reset (void)
+remote_btrace_reset (remote_state *rs)
{
- struct remote_state *rs = get_remote_state ();
-
memset (&rs->btrace_config, 0, sizeof (rs->btrace_config));
}
/* Synchronize the configuration with the target. */
-static void
-btrace_sync_conf (const struct btrace_config *conf)
+void
+remote_target::btrace_sync_conf (const btrace_config *conf)
{
struct packet_config *packet;
struct remote_state *rs;
char *buf, *pos, *endbuf;
rs = get_remote_state ();
- buf = rs->buf;
+ buf = rs->buf.data ();
endbuf = buf + get_remote_packet_size ();
packet = &remote_protocol_packets[PACKET_Qbtrace_conf_bts_size];
conf->bts.size);
putpkt (buf);
- getpkt (&buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_ok (buf, packet) == PACKET_ERROR)
{
conf->pt.size);
putpkt (buf);
- getpkt (&buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_ok (buf, packet) == PACKET_ERROR)
{
btrace_read_config (struct btrace_config *conf)
{
gdb::optional<gdb::char_vector> xml
- = target_read_stralloc (target_stack, TARGET_OBJECT_BTRACE_CONF, "");
+ = target_read_stralloc (current_top_target (), TARGET_OBJECT_BTRACE_CONF, "");
if (xml)
parse_xml_btrace_conf (conf, xml->data ());
}
/* Maybe reopen target btrace. */
-static void
-remote_btrace_maybe_reopen (void)
+void
+remote_target::remote_btrace_maybe_reopen ()
{
struct remote_state *rs = get_remote_state ();
- struct thread_info *tp;
int btrace_target_pushed = 0;
+#if !defined (HAVE_LIBIPT)
int warned = 0;
+#endif
+
+ /* Don't bother walking the entirety of the remote thread list when
+ we know the feature isn't supported by the remote. */
+ if (packet_support (PACKET_qXfer_btrace_conf) != PACKET_ENABLE)
+ return;
scoped_restore_current_thread restore_thread;
- ALL_NON_EXITED_THREADS (tp)
+ for (thread_info *tp : all_non_exited_threads ())
{
set_general_thread (tp->ptid);
struct btrace_target_info *tinfo = NULL;
struct packet_config *packet = NULL;
struct remote_state *rs = get_remote_state ();
- char *buf = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *buf = rs->buf.data ();
+ char *endbuf = buf + get_remote_packet_size ();
switch (conf->format)
{
buf += xsnprintf (buf, endbuf - buf, "%s", packet->name);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_ok (rs->buf, packet) == PACKET_ERROR)
{
if (rs->buf[0] == 'E' && rs->buf[1] == '.')
error (_("Could not enable branch tracing for %s: %s"),
- target_pid_to_str (ptid), rs->buf + 2);
+ target_pid_to_str (ptid).c_str (), &rs->buf[2]);
else
error (_("Could not enable branch tracing for %s."),
- target_pid_to_str (ptid));
+ target_pid_to_str (ptid).c_str ());
}
tinfo = XCNEW (struct btrace_target_info);
/* If we fail to read the configuration, we lose some information, but the
tracing itself is not impacted. */
- TRY
+ try
{
btrace_read_config (&tinfo->conf);
}
- CATCH (err, RETURN_MASK_ERROR)
+ catch (const gdb_exception_error &err)
{
if (err.message != NULL)
- warning ("%s", err.message);
+ warning ("%s", err.what ());
}
- END_CATCH
return tinfo;
}
{
struct packet_config *packet = &remote_protocol_packets[PACKET_Qbtrace_off];
struct remote_state *rs = get_remote_state ();
- char *buf = rs->buf;
- char *endbuf = rs->buf + get_remote_packet_size ();
+ char *buf = rs->buf.data ();
+ char *endbuf = buf + get_remote_packet_size ();
if (packet_config_support (packet) != PACKET_ENABLE)
error (_("Target does not support branch tracing."));
buf += xsnprintf (buf, endbuf - buf, "%s", packet->name);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
if (packet_ok (rs->buf, packet) == PACKET_ERROR)
{
if (rs->buf[0] == 'E' && rs->buf[1] == '.')
error (_("Could not disable branch tracing for %s: %s"),
- target_pid_to_str (tinfo->ptid), rs->buf + 2);
+ target_pid_to_str (tinfo->ptid).c_str (), &rs->buf[2]);
else
error (_("Could not disable branch tracing for %s."),
- target_pid_to_str (tinfo->ptid));
+ target_pid_to_str (tinfo->ptid).c_str ());
}
xfree (tinfo);
}
gdb::optional<gdb::char_vector> xml
- = target_read_stralloc (target_stack, TARGET_OBJECT_BTRACE, annex);
+ = target_read_stralloc (current_top_target (), TARGET_OBJECT_BTRACE, annex);
if (!xml)
return BTRACE_ERR_UNKNOWN;
xsnprintf (annex, annex_size, "%x", pid);
}
- filename = target_read_stralloc (target_stack,
+ filename = target_read_stralloc (current_top_target (),
TARGET_OBJECT_EXEC_FILE, annex);
return filename ? filename->data () : nullptr;
struct remote_state *rs = get_remote_state ();
if (packet_support (PACKET_vCont) == PACKET_SUPPORT_UNKNOWN)
- remote_vcont_probe (rs);
+ remote_vcont_probe ();
return rs->supports_vCont.s && rs->supports_vCont.S;
}
int handle_len,
inferior *inf)
{
- struct thread_info *tp;
-
- ALL_NON_EXITED_THREADS (tp)
+ for (thread_info *tp : all_non_exited_threads ())
{
remote_thread_info *priv = get_remote_thread_info (tp);
return NULL;
}
+gdb::byte_vector
+remote_target::thread_info_to_thread_handle (struct thread_info *tp)
+{
+ remote_thread_info *priv = get_remote_thread_info (tp);
+ return priv->thread_handle;
+}
+
bool
remote_target::can_async_p ()
{
static void
remote_async_inferior_event_handler (gdb_client_data data)
{
- inferior_event_handler (INF_REG_EVENT, NULL);
+ inferior_event_handler (INF_REG_EVENT, data);
}
void
/* If there are pending events in the stop reply queue tell the
event loop to process them. */
- if (!QUEUE_is_empty (stop_reply_p, stop_reply_queue))
- mark_async_event_handler (remote_async_inferior_event_token);
+ if (!rs->stop_reply_queue.empty ())
+ mark_async_event_handler (rs->remote_async_inferior_event_token);
/* For simplicity, below we clear the pending events token
without remembering whether it is marked, so here we always
mark it. If there's actually no pending notification to
/* If the core is disabling async, it doesn't want to be
disturbed with target events. Clear all async event sources
too. */
- clear_async_event_handler (remote_async_inferior_event_token);
+ clear_async_event_handler (rs->remote_async_inferior_event_token);
if (target_is_non_stop_p ())
clear_async_event_handler (rs->notif_state->get_pending_events_token);
}
if (packet_support (PACKET_QThreadEvents) == PACKET_DISABLE)
return;
- xsnprintf (rs->buf, size, "QThreadEvents:%x", enable ? 1 : 0);
+ xsnprintf (rs->buf.data (), size, "QThreadEvents:%x", enable ? 1 : 0);
putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
+ getpkt (&rs->buf, 0);
switch (packet_ok (rs->buf,
&remote_protocol_packets[PACKET_QThreadEvents]))
{
case PACKET_OK:
- if (strcmp (rs->buf, "OK") != 0)
- error (_("Remote refused setting thread events: %s"), rs->buf);
+ if (strcmp (rs->buf.data (), "OK") != 0)
+ error (_("Remote refused setting thread events: %s"), rs->buf.data ());
break;
case PACKET_ERROR:
- warning (_("Remote failure reply: %s"), rs->buf);
+ warning (_("Remote failure reply: %s"), rs->buf.data ());
break;
case PACKET_UNKNOWN:
break;
static void
remote_new_objfile (struct objfile *objfile)
{
- struct remote_state *rs = get_remote_state ();
+ remote_target *remote = get_current_remote_target ();
- if (rs->remote_desc != 0) /* Have a remote connection. */
- remote_check_symbols ();
+ if (remote != NULL) /* Have a remote connection. */
+ remote->remote_check_symbols ();
}
/* Pull all the tracepoints defined on the target and create local
/* Ask for a first packet of tracepoint definition. */
putpkt ("qTfP");
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
while (*p && *p != 'l')
{
parse_tracepoint_definition (p, utpp);
/* Ask for another packet of tracepoint definition. */
putpkt ("qTsP");
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
}
return 0;
}
/* Ask for a first packet of variable definition. */
putpkt ("qTfV");
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
while (*p && *p != 'l')
{
parse_tsv_definition (p, utsvp);
/* Ask for another packet of variable definition. */
putpkt ("qTsV");
- getpkt (&rs->buf, &rs->buf_size, 0);
- p = rs->buf;
+ getpkt (&rs->buf, 0);
+ p = rs->buf.data ();
}
return 0;
}
"is %s.\n"), value);
}
+/* Return true if the vCont;r action is supported by the remote
+ stub. */
+
+bool
+remote_target::vcont_r_supported ()
+{
+ if (packet_support (PACKET_vCont) == PACKET_SUPPORT_UNKNOWN)
+ remote_vcont_probe ();
+
+ return (packet_support (PACKET_vCont) == PACKET_ENABLE
+ && get_remote_state ()->supports_vCont.r);
+}
+
/* The "set/show range-stepping" set hook. */
static void
set_range_stepping (const char *ignore_args, int from_tty,
struct cmd_list_element *c)
{
- struct remote_state *rs = get_remote_state ();
-
- /* Whene enabling, check whether range stepping is actually
- supported by the target, and warn if not. */
+ /* When enabling, check whether range stepping is actually supported
+ by the target, and warn if not. */
if (use_range_stepping)
{
- if (rs->remote_desc != NULL)
- {
- if (packet_support (PACKET_vCont) == PACKET_SUPPORT_UNKNOWN)
- remote_vcont_probe (rs);
-
- if (packet_support (PACKET_vCont) == PACKET_ENABLE
- && rs->supports_vCont.r)
- return;
- }
-
- warning (_("Range stepping is not supported by the current target"));
+ remote_target *remote = get_current_remote_target ();
+ if (remote == NULL
+ || !remote->vcont_r_supported ())
+ warning (_("Range stepping is not supported by the current target"));
}
}
const char *cmd_name;
/* architecture specific data */
- remote_gdbarch_data_handle =
- gdbarch_data_register_post_init (init_remote_state);
remote_g_packet_data_handle =
gdbarch_data_register_pre_init (remote_g_packet_data_init);
- remote_pspace_data
- = register_program_space_data_with_cleanup (NULL,
- remote_pspace_data_cleanup);
-
- /* Initialize the per-target state. At the moment there is only one
- of these, not one per target. Only one target is active at a
- time. */
- remote_state = new_remote_state ();
-
add_target (remote_target_info, remote_target::open);
add_target (extended_remote_target_info, extended_remote_target::open);
/* Hook into new objfile notification. */
gdb::observers::new_objfile.attach (remote_new_objfile);
- /* We're no longer interested in notification events of an inferior
- when it exits. */
- gdb::observers::inferior_exit.attach (discard_pending_stop_replies);
#if 0
init_remote_threadtests ();
#endif
- stop_reply_queue = QUEUE_alloc (stop_reply_p, stop_reply_xfree);
/* set/show remote ... */
add_prefix_cmd ("remote", class_maintenance, set_remote_cmd, _("\
-Remote protocol specific variables\n\
+Remote protocol specific variables.\n\
Configure various remote-protocol specific variables such as\n\
-the packets being used"),
+the packets being used."),
&remote_set_cmdlist, "set remote ",
0 /* allow-unknown */, &setlist);
add_prefix_cmd ("remote", class_maintenance, show_remote_cmd, _("\
-Remote protocol specific variables\n\
+Remote protocol specific variables.\n\
Configure various remote-protocol specific variables such as\n\
-the packets being used"),
+the packets being used."),
&remote_show_cmdlist, "show remote ",
0 /* allow-unknown */, &showlist);
add_setshow_boolean_cmd ("interrupt-on-connect", class_support,
&interrupt_on_connect, _("\
-Set whether interrupt-sequence is sent to remote target when gdb connects to."), _(" \
-Show whether interrupt-sequence is sent to remote target when gdb connects to."), _(" \
+Set whether interrupt-sequence is sent to remote target when gdb connects to."), _("\
+Show whether interrupt-sequence is sent to remote target when gdb connects to."), _("\
If set, interrupt sequence is sent to remote target."),
NULL, NULL,
&remote_set_cmdlist, &remote_show_cmdlist);
_("Show the maximum number of bytes per memory-read packet."),
&remote_show_cmdlist);
- add_setshow_zinteger_cmd ("hardware-watchpoint-limit", no_class,
+ add_setshow_zuinteger_unlimited_cmd ("hardware-watchpoint-limit", no_class,
&remote_hw_watchpoint_limit, _("\
Set the maximum number of target hardware watchpoints."), _("\
Show the maximum number of target hardware watchpoints."), _("\
-Specify a negative limit for unlimited."),
- NULL, NULL, /* FIXME: i18n: The maximum
- number of target hardware
- watchpoints is %s. */
- &remote_set_cmdlist, &remote_show_cmdlist);
- add_setshow_zinteger_cmd ("hardware-watchpoint-length-limit", no_class,
+Specify \"unlimited\" for unlimited hardware watchpoints."),
+ NULL, show_hardware_watchpoint_limit,
+ &remote_set_cmdlist,
+ &remote_show_cmdlist);
+ add_setshow_zuinteger_unlimited_cmd ("hardware-watchpoint-length-limit",
+ no_class,
&remote_hw_watchpoint_length_limit, _("\
Set the maximum length (in bytes) of a target hardware watchpoint."), _("\
Show the maximum length (in bytes) of a target hardware watchpoint."), _("\
-Specify a negative limit for unlimited."),
- NULL, NULL, /* FIXME: i18n: The maximum
- length (in bytes) of a target
- hardware watchpoint is %s. */
+Specify \"unlimited\" to allow watchpoints of unlimited size."),
+ NULL, show_hardware_watchpoint_length_limit,
&remote_set_cmdlist, &remote_show_cmdlist);
- add_setshow_zinteger_cmd ("hardware-breakpoint-limit", no_class,
+ add_setshow_zuinteger_unlimited_cmd ("hardware-breakpoint-limit", no_class,
&remote_hw_breakpoint_limit, _("\
Set the maximum number of target hardware breakpoints."), _("\
Show the maximum number of target hardware breakpoints."), _("\
-Specify a negative limit for unlimited."),
- NULL, NULL, /* FIXME: i18n: The maximum
- number of target hardware
- breakpoints is %s. */
+Specify \"unlimited\" for unlimited hardware breakpoints."),
+ NULL, show_hardware_breakpoint_limit,
&remote_set_cmdlist, &remote_show_cmdlist);
add_setshow_zuinteger_cmd ("remoteaddresssize", class_obscure,
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_memory_map],
"qXfer:memory-map:read", "memory-map", 0);
- add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_spu_read],
- "qXfer:spu:read", "read-spu-object", 0);
-
- add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_spu_write],
- "qXfer:spu:write", "write-spu-object", 0);
-
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_osdata],
"qXfer:osdata:read", "osdata", 0);
documentation). */
add_setshow_auto_boolean_cmd ("Z-packet", class_obscure,
&remote_Z_packet_detect, _("\
-Set use of remote protocol `Z' packets"), _("\
-Show use of remote protocol `Z' packets "), _("\
+Set use of remote protocol `Z' packets."), _("\
+Show use of remote protocol `Z' packets."), _("\
When set, GDB will attempt to use the remote breakpoint and watchpoint\n\
packets."),
set_remote_protocol_Z_packet_cmd,
&remote_set_cmdlist, &remote_show_cmdlist);
add_prefix_cmd ("remote", class_files, remote_command, _("\
-Manipulate files on the remote system\n\
+Manipulate files on the remote system.\n\
Transfer files to and from the remote target system."),
&remote_cmdlist, "remote ",
0 /* allow-unknown */, &cmdlist);
add_setshow_string_noescape_cmd ("exec-file", class_files,
&remote_exec_file_var, _("\
-Set the remote pathname for \"run\""), _("\
-Show the remote pathname for \"run\""), NULL,
+Set the remote pathname for \"run\"."), _("\
+Show the remote pathname for \"run\"."), NULL,
set_remote_exec_file,
show_remote_exec_file,
&remote_set_cmdlist,
&setlist,
&showlist);
+ add_setshow_zinteger_cmd ("watchdog", class_maintenance, &watchdog, _("\
+Set watchdog timer."), _("\
+Show watchdog timer."), _("\
+When non-zero, this timeout is used instead of waiting forever for a target\n\
+to finish a low-level step or continue operation. If the specified amount\n\
+of time passes without a response from the target, an error occurs."),
+ NULL,
+ show_watchdog,
+ &setlist, &showlist);
+
/* Eventually initialize fileio. See fileio.c */
initialize_remote_fileio (remote_set_cmdlist, remote_show_cmdlist);
-
- /* Take advantage of the fact that the TID field is not used, to tag
- special ptids with it set to != 0. */
- magic_null_ptid = ptid_build (42000, -1, 1);
- not_sent_ptid = ptid_build (42000, -2, 1);
- any_thread_ptid = ptid_build (42000, 0, 1);
}