/* Remote target communications for serial-line targets in custom GDB protocol
- Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
+ 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* See the GDB User Guide for details of the GDB remote protocol. */
#include "solib.h"
#include "cli/cli-decode.h"
#include "cli/cli-setshow.h"
+#include "target-descriptions.h"
#include <ctype.h>
#include <sys/time.h>
#include "gdbcore.h" /* for exec_bfd */
#include "remote-fileio.h"
+#include "gdb/fileio.h"
+
+#include "memory-map.h"
/* The size to align memory write packets, when practical. The protocol
does not guarantee any alignment, and gdb will generate short
static void async_remote_interrupt (gdb_client_data);
void async_remote_interrupt_twice (gdb_client_data);
-static void build_remote_gdbarch_data (void);
-
static void remote_files_info (struct target_ops *ignore);
-static void remote_prepare_to_store (void);
+static void remote_prepare_to_store (struct regcache *regcache);
-static void remote_fetch_registers (int regno);
+static void remote_fetch_registers (struct regcache *regcache, int regno);
static void remote_resume (ptid_t ptid, int step,
enum target_signal siggnal);
static void remote_close (int quitting);
-static void remote_store_registers (int regno);
+static void remote_store_registers (struct regcache *regcache, int regno);
static void remote_mourn (void);
static void remote_async_mourn (void);
void _initialize_remote (void);
+/* For "remote". */
+
+static struct cmd_list_element *remote_cmdlist;
+
/* For "set remote" and "show remote". */
static struct cmd_list_element *remote_set_cmdlist;
static struct remote_state remote_state;
static struct remote_state *
-get_remote_state (void)
+get_remote_state_raw (void)
{
return &remote_state;
}
long regnum; /* GDB's internal register number. */
LONGEST pnum; /* Remote protocol register number. */
int in_g_packet; /* Always part of G packet. */
- /* long size in bytes; == register_size (current_gdbarch, regnum);
+ /* long size in bytes; == register_size (current_gdbarch, regnum);
+ at present. */
+ /* char *name; == gdbarch_register_name (current_gdbarch, regnum);
at present. */
- /* char *name; == REGISTER_NAME (regnum); at present. */
};
struct remote_arch_state
long sizeof_g_packet;
/* Description of the remote protocol registers indexed by REGNUM
- (making an array of NUM_REGS + NUM_PSEUDO_REGS in size). */
+ (making an array gdbarch_num_regs in size). */
struct packet_reg *regs;
/* This is the size (in chars) of the first response to the ``g''
return gdbarch_data (current_gdbarch, remote_gdbarch_data_handle);
}
+/* Fetch the global remote target state. */
+
+static struct remote_state *
+get_remote_state (void)
+{
+ /* Make sure that the remote architecture state has been
+ initialized, because doing so might reallocate rs->buf. Any
+ function which calls getpkt also needs to be mindful of changes
+ to rs->buf, but this call limits the number of places which run
+ into trouble. */
+ get_remote_arch_state ();
+
+ return get_remote_state_raw ();
+}
+
+static int
+compare_pnums (const void *lhs_, const void *rhs_)
+{
+ const struct packet_reg * const *lhs = lhs_;
+ const struct packet_reg * const *rhs = rhs_;
+
+ if ((*lhs)->pnum < (*rhs)->pnum)
+ return -1;
+ else if ((*lhs)->pnum == (*rhs)->pnum)
+ return 0;
+ else
+ return 1;
+}
+
static void *
init_remote_state (struct gdbarch *gdbarch)
{
- int regnum;
- struct remote_state *rs = get_remote_state ();
+ int regnum, num_remote_regs, offset;
+ struct remote_state *rs = get_remote_state_raw ();
struct remote_arch_state *rsa;
+ struct packet_reg **remote_regs;
rsa = GDBARCH_OBSTACK_ZALLOC (gdbarch, struct remote_arch_state);
- rsa->sizeof_g_packet = 0;
-
- /* Assume a 1:1 regnum<->pnum table. */
- rsa->regs = GDBARCH_OBSTACK_CALLOC (gdbarch, NUM_REGS + NUM_PSEUDO_REGS,
+ /* Use the architecture to build a regnum<->pnum table, which will be
+ 1:1 unless a feature set specifies otherwise. */
+ rsa->regs = GDBARCH_OBSTACK_CALLOC (gdbarch,
+ gdbarch_num_regs (gdbarch),
struct packet_reg);
- for (regnum = 0; regnum < NUM_REGS + NUM_PSEUDO_REGS; regnum++)
+ for (regnum = 0; regnum < gdbarch_num_regs (gdbarch); regnum++)
{
struct packet_reg *r = &rsa->regs[regnum];
- r->pnum = regnum;
+
+ if (register_size (gdbarch, regnum) == 0)
+ /* Do not try to fetch zero-sized (placeholder) registers. */
+ r->pnum = -1;
+ else
+ r->pnum = gdbarch_remote_register_number (gdbarch, regnum);
+
r->regnum = regnum;
- r->offset = DEPRECATED_REGISTER_BYTE (regnum);
- r->in_g_packet = (regnum < NUM_REGS);
- /* ...name = REGISTER_NAME (regnum); */
+ }
+
+ /* Define the g/G packet format as the contents of each register
+ with a remote protocol number, in order of ascending protocol
+ number. */
- /* Compute packet size by accumulating the size of all registers. */
- if (regnum < NUM_REGS)
- rsa->sizeof_g_packet += register_size (current_gdbarch, regnum);
+ remote_regs = alloca (gdbarch_num_regs (gdbarch)
+ * sizeof (struct packet_reg *));
+ for (num_remote_regs = 0, regnum = 0;
+ regnum < gdbarch_num_regs (gdbarch);
+ regnum++)
+ if (rsa->regs[regnum].pnum != -1)
+ remote_regs[num_remote_regs++] = &rsa->regs[regnum];
+
+ qsort (remote_regs, num_remote_regs, sizeof (struct packet_reg *),
+ compare_pnums);
+
+ for (regnum = 0, offset = 0; regnum < num_remote_regs; regnum++)
+ {
+ remote_regs[regnum]->in_g_packet = 1;
+ remote_regs[regnum]->offset = offset;
+ offset += register_size (gdbarch, remote_regs[regnum]->regnum);
}
+ /* Record the maximum possible size of the g packet - it may turn out
+ to be smaller. */
+ rsa->sizeof_g_packet = offset;
+
/* Default maximum number of characters in a packet body. Many
remote stubs have a hardwired buffer size of 400 bytes
(c.f. BUFMAX in m68k-stub.c and i386-stub.c). BUFMAX-1 is used
static struct packet_reg *
packet_reg_from_regnum (struct remote_arch_state *rsa, long regnum)
{
- if (regnum < 0 && regnum >= NUM_REGS + NUM_PSEUDO_REGS)
+ if (regnum < 0 && regnum >= gdbarch_num_regs (current_gdbarch))
return NULL;
else
{
packet_reg_from_pnum (struct remote_arch_state *rsa, LONGEST pnum)
{
int i;
- for (i = 0; i < NUM_REGS + NUM_PSEUDO_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (current_gdbarch); i++)
{
struct packet_reg *r = &rsa->regs[i];
if (r->pnum == pnum)
}
static enum packet_result
-packet_ok (const char *buf, struct packet_config *config)
+packet_check_result (const char *buf)
{
if (buf[0] != '\0')
{
/* The stub recognized the packet request. Check that the
operation succeeded. */
+ if (buf[0] == 'E'
+ && isxdigit (buf[1]) && isxdigit (buf[2])
+ && buf[3] == '\0')
+ /* "Enn" - definitly an error. */
+ return PACKET_ERROR;
+
+ /* Always treat "E." as an error. This will be used for
+ more verbose error messages, such as E.memtypes. */
+ if (buf[0] == 'E' && buf[1] == '.')
+ return PACKET_ERROR;
+
+ /* The packet may or may not be OK. Just assume it is. */
+ return PACKET_OK;
+ }
+ else
+ /* The stub does not support the packet. */
+ return PACKET_UNKNOWN;
+}
+
+static enum packet_result
+packet_ok (const char *buf, struct packet_config *config)
+{
+ enum packet_result result;
+
+ result = packet_check_result (buf);
+ switch (result)
+ {
+ case PACKET_OK:
+ case PACKET_ERROR:
+ /* The stub recognized the packet request. */
switch (config->support)
{
case PACKET_SUPPORT_UNKNOWN:
case PACKET_ENABLE:
break;
}
- if (buf[0] == 'O' && buf[1] == 'K' && buf[2] == '\0')
- /* "OK" - definitly OK. */
- return PACKET_OK;
- if (buf[0] == 'E'
- && isxdigit (buf[1]) && isxdigit (buf[2])
- && buf[3] == '\0')
- /* "Enn" - definitly an error. */
- return PACKET_ERROR;
- /* The packet may or may not be OK. Just assume it is. */
- return PACKET_OK;
- }
- else
- {
+ break;
+ case PACKET_UNKNOWN:
/* The stub does not support the packet. */
switch (config->support)
{
case PACKET_DISABLE:
break;
}
- return PACKET_UNKNOWN;
+ break;
}
+
+ return result;
}
enum {
PACKET_Z2,
PACKET_Z3,
PACKET_Z4,
+ PACKET_vFile_open,
+ PACKET_vFile_pread,
+ PACKET_vFile_pwrite,
+ PACKET_vFile_close,
+ PACKET_vFile_unlink,
PACKET_qXfer_auxv,
+ PACKET_qXfer_features,
+ PACKET_qXfer_libraries,
+ PACKET_qXfer_memory_map,
+ PACKET_qXfer_spu_read,
+ PACKET_qXfer_spu_write,
PACKET_qGetTLSAddr,
PACKET_qSupported,
+ PACKET_QPassSignals,
PACKET_MAX
};
static int use_threadextra_query;
/* Tokens for use by the asynchronous signal handlers for SIGINT. */
-static void *sigint_remote_twice_token;
-static void *sigint_remote_token;
+static struct async_signal_handler *sigint_remote_twice_token;
+static struct async_signal_handler *sigint_remote_token;
/* These are pointers to hook functions that may be set in order to
modify resume/wait behavior for a particular architecture. */
}
}
+static char *last_pass_packet;
+
+/* If 'QPassSignals' is supported, tell the remote stub what signals
+ it can simply pass through to the inferior without reporting. */
+
+static void
+remote_pass_signals (void)
+{
+ if (remote_protocol_packets[PACKET_QPassSignals].support != PACKET_DISABLE)
+ {
+ char *pass_packet, *p;
+ int numsigs = (int) TARGET_SIGNAL_LAST;
+ int count = 0, i;
+
+ gdb_assert (numsigs < 256);
+ for (i = 0; i < numsigs; i++)
+ {
+ if (signal_stop_state (i) == 0
+ && signal_print_state (i) == 0
+ && signal_pass_state (i) == 1)
+ count++;
+ }
+ pass_packet = xmalloc (count * 3 + strlen ("QPassSignals:") + 1);
+ strcpy (pass_packet, "QPassSignals:");
+ p = pass_packet + strlen (pass_packet);
+ for (i = 0; i < numsigs; i++)
+ {
+ if (signal_stop_state (i) == 0
+ && signal_print_state (i) == 0
+ && signal_pass_state (i) == 1)
+ {
+ if (i >= 16)
+ *p++ = tohex (i >> 4);
+ *p++ = tohex (i & 15);
+ if (count)
+ *p++ = ';';
+ else
+ break;
+ count--;
+ }
+ }
+ *p = 0;
+ if (!last_pass_packet || strcmp (last_pass_packet, pass_packet))
+ {
+ struct remote_state *rs = get_remote_state ();
+ char *buf = rs->buf;
+
+ putpkt (pass_packet);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ packet_ok (buf, &remote_protocol_packets[PACKET_QPassSignals]);
+ if (last_pass_packet)
+ xfree (last_pass_packet);
+ last_pass_packet = pass_packet;
+ }
+ else
+ xfree (pass_packet);
+ }
+}
+
#define MAGIC_NULL_PID 42000
static void
{
struct remote_state *rs = get_remote_state ();
int tid = PIDGET (ptid);
- char *buf = rs->buf;
if (tid < 0)
- xsnprintf (buf, get_remote_packet_size (), "T-%08x", -tid);
+ xsnprintf (rs->buf, get_remote_packet_size (), "T-%08x", -tid);
else
- xsnprintf (buf, get_remote_packet_size (), "T%08x", tid);
- putpkt (buf);
+ xsnprintf (rs->buf, get_remote_packet_size (), "T%08x", tid);
+ putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
- return (buf[0] == 'O' && buf[1] == 'K');
+ return (rs->buf[0] == 'O' && rs->buf[1] == 'K');
}
/* About these extended threadlist and threadinfo packets. They are
struct gdb_ext_thread_info
{
threadref threadid; /* External form of thread reference. */
- int active; /* Has state interesting to GDB?
+ int active; /* Has state interesting to GDB?
regs, stack. */
- char display[256]; /* Brief state display, name,
+ char display[256]; /* Brief state display, name,
blocked/suspended. */
char shortname[32]; /* To be used to name threads. */
- char more_display[256]; /* Long info, statistics, queue depth,
+ char more_display[256]; /* Long info, statistics, queue depth,
whatever. */
};
static int threadmatch (threadref *dest, threadref *src);
-static char *pack_threadinfo_request (char *pkt, int mode,
+static char *pack_threadinfo_request (char *pkt, int mode,
threadref *id);
static int remote_unpack_thread_info_response (char *pkt,
*info);
-static int remote_get_threadinfo (threadref *threadid,
+static int remote_get_threadinfo (threadref *threadid,
int fieldset, /*TAG mask */
struct gdb_ext_thread_info *info);
static int parse_threadlist_response (char *pkt,
int result_limit,
threadref *original_echo,
- threadref *resultlist,
+ threadref *resultlist,
int *doneflag);
static int remote_get_threadlist (int startflag,
threadref *nextthread,
int result_limit,
int *done,
- int *result_count,
+ int *result_count,
threadref *threadlist);
typedef int (*rmt_thread_action) (threadref *ref, void *context);
static char *
unpack_nibble (char *buf, int *val)
{
- ishex (*buf++, val);
+ *val = fromhex (*buf++);
return buf;
}
{
struct remote_state *rs = get_remote_state ();
int result;
- char *threadinfo_pkt = rs->buf;
- pack_threadinfo_request (threadinfo_pkt, fieldset, threadid);
- putpkt (threadinfo_pkt);
+ pack_threadinfo_request (rs->buf, fieldset, threadid);
+ putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
- result = remote_unpack_thread_info_response (threadinfo_pkt + 2,
+ result = remote_unpack_thread_info_response (rs->buf + 2,
threadid, info);
return result;
}
{
struct remote_state *rs = get_remote_state ();
static threadref echo_nextthread;
- char *threadlist_packet = rs->buf;
int result = 1;
/* Trancate result limit to be smaller than the packet size. */
remote_current_thread (ptid_t oldpid)
{
struct remote_state *rs = get_remote_state ();
- char *buf = rs->buf;
putpkt ("qC");
getpkt (&rs->buf, &rs->buf_size, 0);
- if (buf[0] == 'Q' && buf[1] == 'C')
+ if (rs->buf[0] == 'Q' && rs->buf[1] == 'C')
/* Use strtoul here, so we'll correctly parse values whose highest
bit is set. The protocol carries them as a simple series of
hex digits; in the absence of a sign, strtol will see such
values as positive numbers out of range for signed 'long', and
return LONG_MAX to indicate an overflow. */
- return pid_to_ptid (strtoul (&buf[2], NULL, 16));
+ return pid_to_ptid (strtoul (&rs->buf[2], NULL, 16));
else
return oldpid;
}
if (use_threadinfo_query)
{
putpkt ("qfThreadInfo");
- bufp = rs->buf;
getpkt (&rs->buf, &rs->buf_size, 0);
+ bufp = rs->buf;
if (bufp[0] != '\0') /* q packet recognized */
{
while (*bufp++ == 'm') /* reply contains one or more TID */
}
while (*bufp++ == ','); /* comma-separated list */
putpkt ("qsThreadInfo");
- bufp = rs->buf;
getpkt (&rs->buf, &rs->buf_size, 0);
+ bufp = rs->buf;
}
return; /* done */
}
if (use_threadextra_query)
{
- char *bufp = rs->buf;
-
- xsnprintf (bufp, get_remote_packet_size (), "qThreadExtraInfo,%x",
+ xsnprintf (rs->buf, get_remote_packet_size (), "qThreadExtraInfo,%x",
PIDGET (tp->ptid));
- putpkt (bufp);
+ putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
- if (bufp[0] != 0)
+ if (rs->buf[0] != 0)
{
- n = min (strlen (bufp) / 2, sizeof (display_buf));
- result = hex2bin (bufp, (gdb_byte *) display_buf, n);
+ n = min (strlen (rs->buf) / 2, sizeof (display_buf));
+ result = hex2bin (rs->buf, (gdb_byte *) display_buf, n);
display_buf [result] = '\0';
return display_buf;
}
if (threadinfo.active)
{
if (*threadinfo.shortname)
- n += xsnprintf (&display_buf[0], sizeof (display_buf) - n,
+ n += xsnprintf (&display_buf[0], sizeof (display_buf) - n,
" Name: %s,", threadinfo.shortname);
if (*threadinfo.display)
- n += xsnprintf (&display_buf[n], sizeof (display_buf) - n,
+ n += xsnprintf (&display_buf[n], sizeof (display_buf) - n,
" State: %s,", threadinfo.display);
if (*threadinfo.more_display)
- n += xsnprintf (&display_buf[n], sizeof (display_buf) - n,
+ n += xsnprintf (&display_buf[n], sizeof (display_buf) - n,
" Priority: %s", threadinfo.more_display);
if (n > 0)
putpkt (rs->buf);
remote_fileio_reset ();
-
+
/* Now query for status so this looks just like we restarted
gdbserver from scratch. */
putpkt ("?");
get_offsets (void)
{
struct remote_state *rs = get_remote_state ();
- char *buf = rs->buf;
+ char *buf;
char *ptr;
- int lose;
- CORE_ADDR text_addr, data_addr, bss_addr;
+ int lose, num_segments = 0, do_sections, do_segments;
+ CORE_ADDR text_addr, data_addr, bss_addr, segments[2];
struct section_offsets *offs;
+ struct symfile_segment_data *data;
+
+ if (symfile_objfile == NULL)
+ return;
putpkt ("qOffsets");
getpkt (&rs->buf, &rs->buf_size, 0);
+ buf = rs->buf;
if (buf[0] == '\000')
return; /* Return silently. Stub doesn't support
/* Don't use strtol, could lose on big values. */
while (*ptr && *ptr != ';')
text_addr = (text_addr << 4) + fromhex (*ptr++);
- }
- else
- lose = 1;
- if (!lose && strncmp (ptr, ";Data=", 6) == 0)
- {
- ptr += 6;
- while (*ptr && *ptr != ';')
- data_addr = (data_addr << 4) + fromhex (*ptr++);
- }
- else
- lose = 1;
+ if (strncmp (ptr, ";Data=", 6) == 0)
+ {
+ ptr += 6;
+ while (*ptr && *ptr != ';')
+ data_addr = (data_addr << 4) + fromhex (*ptr++);
+ }
+ else
+ lose = 1;
+
+ if (!lose && strncmp (ptr, ";Bss=", 5) == 0)
+ {
+ ptr += 5;
+ while (*ptr && *ptr != ';')
+ bss_addr = (bss_addr << 4) + fromhex (*ptr++);
- if (!lose && strncmp (ptr, ";Bss=", 5) == 0)
+ if (bss_addr != data_addr)
+ warning (_("Target reported unsupported offsets: %s"), buf);
+ }
+ else
+ lose = 1;
+ }
+ else if (strncmp (ptr, "TextSeg=", 8) == 0)
{
- ptr += 5;
+ ptr += 8;
+ /* Don't use strtol, could lose on big values. */
while (*ptr && *ptr != ';')
- bss_addr = (bss_addr << 4) + fromhex (*ptr++);
+ text_addr = (text_addr << 4) + fromhex (*ptr++);
+ num_segments = 1;
+
+ if (strncmp (ptr, ";DataSeg=", 9) == 0)
+ {
+ ptr += 9;
+ while (*ptr && *ptr != ';')
+ data_addr = (data_addr << 4) + fromhex (*ptr++);
+ num_segments++;
+ }
}
else
lose = 1;
if (lose)
error (_("Malformed response to offset query, %s"), buf);
-
- if (symfile_objfile == NULL)
- return;
+ else if (*ptr != '\0')
+ warning (_("Target reported unsupported offsets: %s"), buf);
offs = ((struct section_offsets *)
alloca (SIZEOF_N_SECTION_OFFSETS (symfile_objfile->num_sections)));
memcpy (offs, symfile_objfile->section_offsets,
SIZEOF_N_SECTION_OFFSETS (symfile_objfile->num_sections));
- offs->offsets[SECT_OFF_TEXT (symfile_objfile)] = text_addr;
+ data = get_symfile_segment_data (symfile_objfile->obfd);
+ do_segments = (data != NULL);
+ do_sections = num_segments == 0;
+
+ if (num_segments > 0)
+ {
+ segments[0] = text_addr;
+ segments[1] = data_addr;
+ }
+ /* If we have two segments, we can still try to relocate everything
+ by assuming that the .text and .data offsets apply to the whole
+ text and data segments. Convert the offsets given in the packet
+ to base addresses for symfile_map_offsets_to_segments. */
+ else if (data && data->num_segments == 2)
+ {
+ segments[0] = data->segment_bases[0] + text_addr;
+ segments[1] = data->segment_bases[1] + data_addr;
+ num_segments = 2;
+ }
+ /* There's no way to relocate by segment. */
+ else
+ do_segments = 0;
- /* This is a temporary kludge to force data and bss to use the same offsets
- because that's what nlmconv does now. The real solution requires changes
- to the stub and remote.c that I don't have time to do right now. */
+ if (do_segments)
+ {
+ int ret = symfile_map_offsets_to_segments (symfile_objfile->obfd, data,
+ offs, num_segments, segments);
- offs->offsets[SECT_OFF_DATA (symfile_objfile)] = data_addr;
- offs->offsets[SECT_OFF_BSS (symfile_objfile)] = data_addr;
+ if (ret == 0 && !do_sections)
+ error (_("Can not handle qOffsets TextSeg response with this symbol file"));
- objfile_relocate (symfile_objfile, offs);
-}
+ if (ret > 0)
+ do_sections = 0;
+ }
-/* Stub for catch_errors. */
+ if (data)
+ free_symfile_segment_data (data);
-static int
-remote_start_remote_dummy (struct ui_out *uiout, void *dummy)
-{
- start_remote (); /* Initialize gdb process mechanisms. */
- /* NOTE: Return something >=0. A -ve value is reserved for
- catch_exceptions. */
- return 1;
+ if (do_sections)
+ {
+ offs->offsets[SECT_OFF_TEXT (symfile_objfile)] = text_addr;
+
+ /* This is a temporary kludge to force data and bss to use the same offsets
+ because that's what nlmconv does now. The real solution requires changes
+ to the stub and remote.c that I don't have time to do right now. */
+
+ offs->offsets[SECT_OFF_DATA (symfile_objfile)] = data_addr;
+ offs->offsets[SECT_OFF_BSS (symfile_objfile)] = data_addr;
+ }
+
+ objfile_relocate (symfile_objfile, offs);
}
+/* Stub for catch_exception. */
+
static void
-remote_start_remote (struct ui_out *uiout, void *dummy)
+remote_start_remote (struct ui_out *uiout, void *from_tty_p)
{
+ int from_tty = * (int *) from_tty_p;
+
immediate_quit++; /* Allow user to interrupt it. */
/* Ack any packet which the remote side has already sent. */
putpkt ("?"); /* Initiate a query from remote machine. */
immediate_quit--;
- remote_start_remote_dummy (uiout, dummy);
+ start_remote (from_tty); /* Initialize gdb process mechanisms. */
}
/* Open a connection to a remote debugger.
because we need both at the same time. */
msg = alloca (get_remote_packet_size ());
- reply = rs->buf;
-
/* Invite target to request symbol lookups. */
putpkt ("qSymbol::");
getpkt (&rs->buf, &rs->buf_size, 0);
packet_ok (rs->buf, &remote_protocol_packets[PACKET_qSymbol]);
+ reply = rs->buf;
while (strncmp (reply, "qSymbol:", 8) == 0)
{
if (sym == NULL)
xsnprintf (msg, get_remote_packet_size (), "qSymbol::%s", &reply[8]);
else
- xsnprintf (msg, get_remote_packet_size (), "qSymbol:%s:%s",
- paddr_nz (SYMBOL_VALUE_ADDRESS (sym)),
- &reply[8]);
+ {
+ CORE_ADDR sym_addr = SYMBOL_VALUE_ADDRESS (sym);
+
+ /* If this is a function address, return the start of code
+ instead of any data function descriptor. */
+ sym_addr = gdbarch_convert_from_func_ptr_addr (current_gdbarch,
+ sym_addr,
+ ¤t_target);
+
+ xsnprintf (msg, get_remote_packet_size (), "qSymbol:%s:%s",
+ paddr_nz (sym_addr), &reply[8]);
+ }
+
putpkt (msg);
getpkt (&rs->buf, &rs->buf_size, 0);
+ reply = rs->buf;
}
}
static struct protocol_feature remote_protocol_features[] = {
{ "PacketSize", PACKET_DISABLE, remote_packet_size, -1 },
{ "qXfer:auxv:read", PACKET_DISABLE, remote_supported_packet,
- PACKET_qXfer_auxv }
+ PACKET_qXfer_auxv },
+ { "qXfer:features:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_features },
+ { "qXfer:libraries:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_libraries },
+ { "qXfer:memory-map:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_memory_map },
+ { "qXfer:spu:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_spu_read },
+ { "qXfer:spu:write", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_spu_write },
+ { "QPassSignals", PACKET_DISABLE, remote_supported_packet,
+ PACKET_QPassSignals },
};
static void
}
else
{
+ *end = '\0';
+ next = end + 1;
+
if (end == p)
{
warning (_("empty item in \"qSupported\" response"));
continue;
}
-
- *end = '\0';
- next = end + 1;
}
name_end = strchr (p, '=');
unpush_target (target);
+ /* Make sure we send the passed signals list the next time we resume. */
+ xfree (last_pass_packet);
+ last_pass_packet = NULL;
+
remote_fileio_reset ();
reopen_exec_file ();
reread_symbols ();
which later probes to skip. */
remote_query_supported ();
+ /* Next, if the target can specify a description, read it. We do
+ this before anything involving memory or registers. */
+ target_find_description ();
+
/* Without this, some commands which require an active target (such
as kill) won't work. This variable serves (at least) double duty
as both the pid of the target process (if it has such), and as a
function. See cli-dump.c. */
{
struct gdb_exception ex
- = catch_exception (uiout, remote_start_remote, NULL, RETURN_MASK_ALL);
+ = catch_exception (uiout, remote_start_remote, &from_tty,
+ RETURN_MASK_ALL);
if (ex.reason < 0)
{
pop_target ();
getpkt (&rs->buf, &rs->buf_size, 0);
}
- post_create_inferior (¤t_target, from_tty);
-
if (exec_bfd) /* No use without an exec file. */
remote_check_symbols (symfile_objfile);
}
/* Tell the remote target to detach. */
strcpy (rs->buf, "D");
- remote_send (&rs->buf, &rs->buf_size);
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ if (rs->buf[0] == 'E')
+ error (_("Can't detach process."));
/* Unregister the file descriptor from the event loop. */
if (target_is_async_p ())
static void
remote_vcont_probe (struct remote_state *rs)
{
- char *buf = rs->buf;
+ char *buf;
- strcpy (buf, "vCont?");
- putpkt (buf);
+ strcpy (rs->buf, "vCont?");
+ putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
+ buf = rs->buf;
/* Make sure that the features we assume are supported. */
if (strncmp (buf, "vCont", 5) == 0)
remote_resume (ptid_t ptid, int step, enum target_signal siggnal)
{
struct remote_state *rs = get_remote_state ();
- char *buf = rs->buf;
+ char *buf;
int pid = PIDGET (ptid);
last_sent_signal = siggnal;
if (deprecated_target_resume_hook)
(*deprecated_target_resume_hook) ();
+ /* Update the inferior on signals to silently pass, if they've changed. */
+ remote_pass_signals ();
+
/* The vCont packet doesn't need to specify threads via Hc. */
if (remote_vcont_resume (ptid, step, siggnal))
return;
else
set_thread (pid, 0); /* Run this thread. */
+ buf = rs->buf;
if (siggnal != TARGET_SIGNAL_0)
{
buf[0] = step ? 'S' : 'C';
{
signal (SIGINT, handle_sigint);
if (sigint_remote_twice_token)
- delete_async_signal_handler ((struct async_signal_handler **)
- &sigint_remote_twice_token);
+ delete_async_signal_handler (&sigint_remote_twice_token);
if (sigint_remote_token)
- delete_async_signal_handler ((struct async_signal_handler **)
- &sigint_remote_token);
+ delete_async_signal_handler (&sigint_remote_token);
}
/* Send ^C to target to halt it. Target will respond, and send us a
{
struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
- char *buf = rs->buf;
ULONGEST thread_num = -1;
ULONGEST addr;
+ int solibs_changed = 0;
status->kind = TARGET_WAITKIND_EXITED;
status->value.integer = 0;
while (1)
{
- char *p;
+ char *buf, *p;
ofunc = signal (SIGINT, remote_interrupt);
getpkt (&rs->buf, &rs->buf_size, 1);
signal (SIGINT, ofunc);
+ buf = rs->buf;
+
/* This is a hook for when we need to do something (perhaps the
collection of trace data) every time the target stops. */
if (deprecated_target_wait_loop_hook)
p = unpack_varlen_hex (++p1, &addr);
remote_watch_data_address = (CORE_ADDR)addr;
}
+ else if (strncmp (p, "library", p1 - p) == 0)
+ {
+ p1++;
+ p_temp = p1;
+ while (*p_temp && *p_temp != ';')
+ p_temp++;
+
+ solibs_changed = 1;
+ p = p_temp;
+ }
else
{
/* Silently skip unknown optional info. */
phex_nz (pnum, 0), p, buf);
fieldsize = hex2bin (p, regs,
- register_size (current_gdbarch,
+ register_size (current_gdbarch,
reg->regnum));
p += 2 * fieldsize;
- if (fieldsize < register_size (current_gdbarch,
+ if (fieldsize < register_size (current_gdbarch,
reg->regnum))
warning (_("Remote reply is too short: %s"), buf);
- regcache_raw_supply (current_regcache,
+ regcache_raw_supply (get_current_regcache (),
reg->regnum, regs);
}
if (*p++ != ';')
- error (_("Remote register badly formatted: %s\nhere: %s"),
+ error (_("Remote register badly formatted: %s\nhere: %s"),
buf, p);
}
}
/* fall through */
case 'S': /* Old style status, just signal only. */
- status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = (enum target_signal)
- (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
+ if (solibs_changed)
+ status->kind = TARGET_WAITKIND_LOADED;
+ else
+ {
+ status->kind = TARGET_WAITKIND_STOPPED;
+ status->value.sig = (enum target_signal)
+ (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
+ }
if (buf[3] == 'p')
{
{
struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
- char *buf = rs->buf;
ULONGEST thread_num = -1;
ULONGEST addr;
+ int solibs_changed = 0;
status->kind = TARGET_WAITKIND_EXITED;
status->value.integer = 0;
while (1)
{
- char *p;
+ char *buf, *p;
if (!target_is_async_p ())
ofunc = signal (SIGINT, remote_interrupt);
if (!target_is_async_p ())
signal (SIGINT, ofunc);
+ buf = rs->buf;
+
/* This is a hook for when we need to do something (perhaps the
collection of trace data) every time the target stops. */
if (deprecated_target_wait_loop_hook)
/* If this packet is an awatch packet, don't parse the 'a'
as a register number. */
- if (!strncmp (p, "awatch", strlen ("awatch")) != 0)
+ if (strncmp (p, "awatch", strlen("awatch")) != 0)
{
/* Read the register number. */
pnum = strtol (p, &p_temp, 16);
p = unpack_varlen_hex (++p1, &addr);
remote_watch_data_address = (CORE_ADDR)addr;
}
+ else if (strncmp (p, "library", p1 - p) == 0)
+ {
+ p1++;
+ p_temp = p1;
+ while (*p_temp && *p_temp != ';')
+ p_temp++;
+
+ solibs_changed = 1;
+ p = p_temp;
+ }
else
{
/* Silently skip unknown optional info. */
pnum, p, buf);
fieldsize = hex2bin (p, regs,
- register_size (current_gdbarch,
+ register_size (current_gdbarch,
reg->regnum));
p += 2 * fieldsize;
- if (fieldsize < register_size (current_gdbarch,
+ if (fieldsize < register_size (current_gdbarch,
reg->regnum))
warning (_("Remote reply is too short: %s"), buf);
- regcache_raw_supply (current_regcache, reg->regnum, regs);
+ regcache_raw_supply (get_current_regcache (),
+ reg->regnum, regs);
}
if (*p++ != ';')
}
/* fall through */
case 'S': /* Old style status, just signal only. */
- status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = (enum target_signal)
- (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
+ if (solibs_changed)
+ status->kind = TARGET_WAITKIND_LOADED;
+ else
+ {
+ status->kind = TARGET_WAITKIND_STOPPED;
+ status->value.sig = (enum target_signal)
+ (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
+ }
if (buf[3] == 'p')
{
return inferior_ptid;
}
-/* Number of bytes of registers this stub implements. */
-
-static int register_bytes_found;
-
-/* Read the remote registers into the block REGS. */
-/* Currently we just read all the registers, so we don't use regnum. */
+/* Fetch a single register using a 'p' packet. */
static int
-fetch_register_using_p (int regnum)
+fetch_register_using_p (struct regcache *regcache, struct packet_reg *reg)
{
struct remote_state *rs = get_remote_state ();
- char *buf = rs->buf, *p;
+ char *buf, *p;
char regp[MAX_REGISTER_SIZE];
int i;
- p = buf;
+ if (remote_protocol_packets[PACKET_p].support == PACKET_DISABLE)
+ return 0;
+
+ if (reg->pnum == -1)
+ return 0;
+
+ p = rs->buf;
*p++ = 'p';
- p += hexnumstr (p, regnum);
+ p += hexnumstr (p, reg->pnum);
*p++ = '\0';
remote_send (&rs->buf, &rs->buf_size);
- /* If the stub didn't recognize the packet, or if we got an error,
- tell our caller. */
- if (buf[0] == '\0' || buf[0] == 'E')
- return 0;
+ buf = rs->buf;
+
+ switch (packet_ok (buf, &remote_protocol_packets[PACKET_p]))
+ {
+ case PACKET_OK:
+ break;
+ case PACKET_UNKNOWN:
+ return 0;
+ case PACKET_ERROR:
+ error (_("Could not fetch register \"%s\""),
+ gdbarch_register_name (get_regcache_arch (regcache), reg->regnum));
+ }
/* If this register is unfetchable, tell the regcache. */
if (buf[0] == 'x')
{
- regcache_raw_supply (current_regcache, regnum, NULL);
- set_register_cached (regnum, -1);
+ regcache_raw_supply (regcache, reg->regnum, NULL);
return 1;
}
while (p[0] != 0)
{
if (p[1] == 0)
- {
- error (_("fetch_register_using_p: early buf termination"));
- return 0;
- }
+ error (_("fetch_register_using_p: early buf termination"));
regp[i++] = fromhex (p[0]) * 16 + fromhex (p[1]);
p += 2;
}
- regcache_raw_supply (current_regcache, regnum, regp);
+ regcache_raw_supply (regcache, reg->regnum, regp);
return 1;
}
+/* Fetch the registers included in the target's 'g' packet. */
+
+static int
+send_g_packet (void)
+{
+ struct remote_state *rs = get_remote_state ();
+ int i, buf_len;
+ char *p;
+ char *regs;
+
+ sprintf (rs->buf, "g");
+ remote_send (&rs->buf, &rs->buf_size);
+
+ /* We can get out of synch in various cases. If the first character
+ in the buffer is not a hex character, assume that has happened
+ and try to fetch another packet to read. */
+ while ((rs->buf[0] < '0' || rs->buf[0] > '9')
+ && (rs->buf[0] < 'A' || rs->buf[0] > 'F')
+ && (rs->buf[0] < 'a' || rs->buf[0] > 'f')
+ && rs->buf[0] != 'x') /* New: unavailable register value. */
+ {
+ if (remote_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "Bad register packet; fetching a new packet\n");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ }
+
+ buf_len = strlen (rs->buf);
+
+ /* Sanity check the received packet. */
+ if (buf_len % 2 != 0)
+ error (_("Remote 'g' packet reply is of odd length: %s"), rs->buf);
+
+ return buf_len / 2;
+}
+
static void
-remote_fetch_registers (int regnum)
+process_g_packet (struct regcache *regcache)
{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
- char *buf = rs->buf;
- int i;
+ int i, buf_len;
char *p;
- char *regs = alloca (rsa->sizeof_g_packet);
+ char *regs;
- set_thread (PIDGET (inferior_ptid), 1);
+ buf_len = strlen (rs->buf);
- if (regnum >= 0)
+ /* Further sanity checks, with knowledge of the architecture. */
+ if (buf_len > 2 * rsa->sizeof_g_packet)
+ error (_("Remote 'g' packet reply is too long: %s"), rs->buf);
+
+ /* Save the size of the packet sent to us by the target. It is used
+ as a heuristic when determining the max size of packets that the
+ target can safely receive. */
+ if (rsa->actual_register_packet_size == 0)
+ rsa->actual_register_packet_size = buf_len;
+
+ /* If this is smaller than we guessed the 'g' packet would be,
+ update our records. A 'g' reply that doesn't include a register's
+ value implies either that the register is not available, or that
+ the 'p' packet must be used. */
+ if (buf_len < 2 * rsa->sizeof_g_packet)
{
- struct packet_reg *reg = packet_reg_from_regnum (rsa, regnum);
- gdb_assert (reg != NULL);
- if (!reg->in_g_packet)
- internal_error (__FILE__, __LINE__,
- _("Attempt to fetch a non G-packet register when this "
- "remote.c does not support the p-packet."));
- }
- switch (remote_protocol_packets[PACKET_p].support)
+ rsa->sizeof_g_packet = buf_len / 2;
+
+ for (i = 0; i < gdbarch_num_regs (gdbarch); i++)
{
- case PACKET_DISABLE:
- break;
- case PACKET_ENABLE:
- if (fetch_register_using_p (regnum))
- return;
- else
- error (_("Protocol error: p packet not recognized by stub"));
- case PACKET_SUPPORT_UNKNOWN:
- if (fetch_register_using_p (regnum))
- {
- /* The stub recognized the 'p' packet. Remember this. */
- remote_protocol_packets[PACKET_p].support = PACKET_ENABLE;
- return;
- }
+ if (rsa->regs[i].pnum == -1)
+ continue;
+
+ if (rsa->regs[i].offset >= rsa->sizeof_g_packet)
+ rsa->regs[i].in_g_packet = 0;
else
- {
- /* The stub does not support the 'P' packet. Use 'G'
- instead, and don't try using 'P' in the future (it
- will just waste our time). */
- remote_protocol_packets[PACKET_p].support = PACKET_DISABLE;
- break;
- }
+ rsa->regs[i].in_g_packet = 1;
}
+ }
- sprintf (buf, "g");
- remote_send (&rs->buf, &rs->buf_size);
-
- /* Save the size of the packet sent to us by the target. Its used
- as a heuristic when determining the max size of packets that the
- target can safely receive. */
- if ((rsa->actual_register_packet_size) == 0)
- (rsa->actual_register_packet_size) = strlen (buf);
+ regs = alloca (rsa->sizeof_g_packet);
/* Unimplemented registers read as all bits zero. */
memset (regs, 0, rsa->sizeof_g_packet);
- /* We can get out of synch in various cases. If the first character
- in the buffer is not a hex character, assume that has happened
- and try to fetch another packet to read. */
- while ((buf[0] < '0' || buf[0] > '9')
- && (buf[0] < 'A' || buf[0] > 'F')
- && (buf[0] < 'a' || buf[0] > 'f')
- && buf[0] != 'x') /* New: unavailable register value. */
- {
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog,
- "Bad register packet; fetching a new packet\n");
- getpkt (&rs->buf, &rs->buf_size, 0);
- }
-
/* Reply describes registers byte by byte, each byte encoded as two
hex characters. Suck them all up, then supply them to the
register cacheing/storage mechanism. */
- p = buf;
+ p = rs->buf;
for (i = 0; i < rsa->sizeof_g_packet; i++)
{
- if (p[0] == 0)
- break;
- if (p[1] == 0)
- {
- warning (_("Remote reply is of odd length: %s"), buf);
- /* Don't change register_bytes_found in this case, and don't
- print a second warning. */
- goto supply_them;
- }
+ if (p[0] == 0 || p[1] == 0)
+ /* This shouldn't happen - we adjusted sizeof_g_packet above. */
+ internal_error (__FILE__, __LINE__,
+ "unexpected end of 'g' packet reply");
+
if (p[0] == 'x' && p[1] == 'x')
regs[i] = 0; /* 'x' */
else
p += 2;
}
- if (i != register_bytes_found)
- {
- register_bytes_found = i;
- if (REGISTER_BYTES_OK_P ()
- && !REGISTER_BYTES_OK (i))
- warning (_("Remote reply is too short: %s"), buf);
- }
-
- supply_them:
{
int i;
- for (i = 0; i < NUM_REGS + NUM_PSEUDO_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (gdbarch); i++)
{
struct packet_reg *r = &rsa->regs[i];
if (r->in_g_packet)
{
- if (r->offset * 2 >= strlen (buf))
- /* A short packet that didn't include the register's
- value, this implies that the register is zero (and
- not that the register is unavailable). Supply that
- zero value. */
- regcache_raw_supply (current_regcache, r->regnum, NULL);
- else if (buf[r->offset * 2] == 'x')
+ if (r->offset * 2 >= strlen (rs->buf))
+ /* This shouldn't happen - we adjusted in_g_packet above. */
+ internal_error (__FILE__, __LINE__,
+ "unexpected end of 'g' packet reply");
+ else if (rs->buf[r->offset * 2] == 'x')
{
- gdb_assert (r->offset * 2 < strlen (buf));
+ gdb_assert (r->offset * 2 < strlen (rs->buf));
/* The register isn't available, mark it as such (at
the same time setting the value to zero). */
- regcache_raw_supply (current_regcache, r->regnum, NULL);
- set_register_cached (i, -1);
+ regcache_raw_supply (regcache, r->regnum, NULL);
}
else
- regcache_raw_supply (current_regcache, r->regnum,
+ regcache_raw_supply (regcache, r->regnum,
regs + r->offset);
}
}
}
}
+static void
+fetch_registers_using_g (struct regcache *regcache)
+{
+ send_g_packet ();
+ process_g_packet (regcache);
+}
+
+static void
+remote_fetch_registers (struct regcache *regcache, int regnum)
+{
+ struct remote_state *rs = get_remote_state ();
+ struct remote_arch_state *rsa = get_remote_arch_state ();
+ int i;
+
+ set_thread (PIDGET (inferior_ptid), 1);
+
+ if (regnum >= 0)
+ {
+ struct packet_reg *reg = packet_reg_from_regnum (rsa, regnum);
+ gdb_assert (reg != NULL);
+
+ /* If this register might be in the 'g' packet, try that first -
+ we are likely to read more than one register. If this is the
+ first 'g' packet, we might be overly optimistic about its
+ contents, so fall back to 'p'. */
+ if (reg->in_g_packet)
+ {
+ fetch_registers_using_g (regcache);
+ if (reg->in_g_packet)
+ return;
+ }
+
+ if (fetch_register_using_p (regcache, reg))
+ return;
+
+ /* This register is not available. */
+ regcache_raw_supply (regcache, reg->regnum, NULL);
+
+ return;
+ }
+
+ fetch_registers_using_g (regcache);
+
+ for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
+ if (!rsa->regs[i].in_g_packet)
+ if (!fetch_register_using_p (regcache, &rsa->regs[i]))
+ {
+ /* This register is not available. */
+ regcache_raw_supply (regcache, i, NULL);
+ }
+}
+
/* Prepare to store registers. Since we may send them all (using a
'G' request), we have to read out the ones we don't want to change
first. */
static void
-remote_prepare_to_store (void)
+remote_prepare_to_store (struct regcache *regcache)
{
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
case PACKET_DISABLE:
case PACKET_SUPPORT_UNKNOWN:
/* Make sure all the necessary registers are cached. */
- for (i = 0; i < NUM_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
if (rsa->regs[i].in_g_packet)
- regcache_raw_read (current_regcache, rsa->regs[i].regnum, buf);
+ regcache_raw_read (regcache, rsa->regs[i].regnum, buf);
break;
case PACKET_ENABLE:
break;
packet was not recognized. */
static int
-store_register_using_P (int regnum)
+store_register_using_P (const struct regcache *regcache, struct packet_reg *reg)
{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
- struct packet_reg *reg = packet_reg_from_regnum (rsa, regnum);
/* Try storing a single register. */
char *buf = rs->buf;
gdb_byte regp[MAX_REGISTER_SIZE];
char *p;
+ if (remote_protocol_packets[PACKET_P].support == PACKET_DISABLE)
+ return 0;
+
+ if (reg->pnum == -1)
+ return 0;
+
xsnprintf (buf, get_remote_packet_size (), "P%s=", phex_nz (reg->pnum, 0));
p = buf + strlen (buf);
- regcache_raw_collect (current_regcache, reg->regnum, regp);
- bin2hex (regp, p, register_size (current_gdbarch, reg->regnum));
+ regcache_raw_collect (regcache, reg->regnum, regp);
+ bin2hex (regp, p, register_size (gdbarch, reg->regnum));
remote_send (&rs->buf, &rs->buf_size);
- return buf[0] != '\0';
+ switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_P]))
+ {
+ case PACKET_OK:
+ return 1;
+ case PACKET_ERROR:
+ error (_("Could not write register \"%s\""),
+ gdbarch_register_name (gdbarch, reg->regnum));
+ case PACKET_UNKNOWN:
+ return 0;
+ default:
+ internal_error (__FILE__, __LINE__, _("Bad result from packet_ok"));
+ }
}
-
/* Store register REGNUM, or all registers if REGNUM == -1, from the
contents of the register cache buffer. FIXME: ignores errors. */
static void
-remote_store_registers (int regnum)
+store_registers_using_G (const struct regcache *regcache)
{
struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
gdb_byte *regs;
char *p;
- set_thread (PIDGET (inferior_ptid), 1);
-
- if (regnum >= 0)
- {
- switch (remote_protocol_packets[PACKET_P].support)
- {
- case PACKET_DISABLE:
- break;
- case PACKET_ENABLE:
- if (store_register_using_P (regnum))
- return;
- else
- error (_("Protocol error: P packet not recognized by stub"));
- case PACKET_SUPPORT_UNKNOWN:
- if (store_register_using_P (regnum))
- {
- /* The stub recognized the 'P' packet. Remember this. */
- remote_protocol_packets[PACKET_P].support = PACKET_ENABLE;
- return;
- }
- else
- {
- /* The stub does not support the 'P' packet. Use 'G'
- instead, and don't try using 'P' in the future (it
- will just waste our time). */
- remote_protocol_packets[PACKET_P].support = PACKET_DISABLE;
- break;
- }
- }
- }
-
/* Extract all the registers in the regcache copying them into a
local buffer. */
{
int i;
regs = alloca (rsa->sizeof_g_packet);
memset (regs, 0, rsa->sizeof_g_packet);
- for (i = 0; i < NUM_REGS + NUM_PSEUDO_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
{
struct packet_reg *r = &rsa->regs[i];
if (r->in_g_packet)
- regcache_raw_collect (current_regcache, r->regnum, regs + r->offset);
+ regcache_raw_collect (regcache, r->regnum, regs + r->offset);
}
}
each byte encoded as two hex characters. */
p = rs->buf;
*p++ = 'G';
- /* remote_prepare_to_store insures that register_bytes_found gets set. */
- bin2hex (regs, p, register_bytes_found);
+ /* remote_prepare_to_store insures that rsa->sizeof_g_packet gets
+ updated. */
+ bin2hex (regs, p, rsa->sizeof_g_packet);
remote_send (&rs->buf, &rs->buf_size);
}
+
+/* Store register REGNUM, or all registers if REGNUM == -1, from the contents
+ of the register cache buffer. FIXME: ignores errors. */
+
+static void
+remote_store_registers (struct regcache *regcache, int regnum)
+{
+ struct remote_state *rs = get_remote_state ();
+ struct remote_arch_state *rsa = get_remote_arch_state ();
+ int i;
+
+ set_thread (PIDGET (inferior_ptid), 1);
+
+ if (regnum >= 0)
+ {
+ struct packet_reg *reg = packet_reg_from_regnum (rsa, regnum);
+ gdb_assert (reg != NULL);
+
+ /* Always prefer to store registers using the 'P' packet if
+ possible; we often change only a small number of registers.
+ Sometimes we change a larger number; we'd need help from a
+ higher layer to know to use 'G'. */
+ if (store_register_using_P (regcache, reg))
+ return;
+
+ /* For now, don't complain if we have no way to write the
+ register. GDB loses track of unavailable registers too
+ easily. Some day, this may be an error. We don't have
+ any way to read the register, either... */
+ if (!reg->in_g_packet)
+ return;
+
+ store_registers_using_G (regcache);
+ return;
+ }
+
+ store_registers_using_G (regcache);
+
+ for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
+ if (!rsa->regs[i].in_g_packet)
+ if (!store_register_using_P (regcache, &rsa->regs[i]))
+ /* See above for why we do not issue an error here. */
+ continue;
+}
\f
/* Return the number of hex digits in num. */
static CORE_ADDR
remote_address_masked (CORE_ADDR addr)
{
- if (remote_address_size > 0
- && remote_address_size < (sizeof (ULONGEST) * 8))
+ int address_size = remote_address_size;
+ /* If "remoteaddresssize" was not set, default to target address size. */
+ if (!address_size)
+ address_size = gdbarch_addr_bit (current_gdbarch);
+
+ if (address_size > 0
+ && address_size < (sizeof (ULONGEST) * 8))
{
/* Only create a mask when that mask can safely be constructed
in a ULONGEST variable. */
ULONGEST mask = 1;
- mask = (mask << remote_address_size) - 1;
+ mask = (mask << address_size) - 1;
addr &= mask;
}
return addr;
break;
case PACKET_SUPPORT_UNKNOWN:
{
- char *buf = rs->buf;
char *p;
- p = buf;
+ p = rs->buf;
*p++ = 'X';
p += hexnumstr (p, (ULONGEST) addr);
*p++ = ',';
*p++ = ':';
*p = '\0';
- putpkt_binary (buf, (int) (p - buf));
+ putpkt_binary (rs->buf, (int) (p - rs->buf));
getpkt (&rs->buf, &rs->buf_size, 0);
- if (buf[0] == '\0')
+ if (rs->buf[0] == '\0')
{
if (remote_debug)
fprintf_unfiltered (gdb_stdlog,
/* Write memory data directly to the remote machine.
This does not inform the data cache; the data cache uses this.
+ HEADER is the starting part of the packet.
MEMADDR is the address in the remote memory space.
MYADDR is the address of the buffer in our space.
LEN is the number of bytes.
+ PACKET_FORMAT should be either 'X' or 'M', and indicates if we
+ should send data as binary ('X'), or hex-encoded ('M').
- Returns number of bytes transferred, or 0 (setting errno) for
+ The function creates packet of the form
+ <HEADER><ADDRESS>,<LENGTH>:<DATA>
+
+ where encoding of <DATA> is termined by PACKET_FORMAT.
+
+ If USE_LENGTH is 0, then the <LENGTH> field and the preceding comma
+ are omitted.
+
+ Returns the number of bytes transferred, or 0 (setting errno) for
error. Only transfer a single packet. */
-int
-remote_write_bytes (CORE_ADDR memaddr, gdb_byte *myaddr, int len)
+static int
+remote_write_bytes_aux (const char *header, CORE_ADDR memaddr,
+ const gdb_byte *myaddr, int len,
+ char packet_format, int use_length)
{
struct remote_state *rs = get_remote_state ();
- char *buf;
char *p;
- char *plen;
- int plenlen;
+ char *plen = NULL;
+ int plenlen = 0;
int todo;
int nr_bytes;
int payload_size;
int payload_length;
+ int header_length;
- /* Verify that the target can support a binary download. */
- check_binary_download (memaddr);
+ if (packet_format != 'X' && packet_format != 'M')
+ internal_error (__FILE__, __LINE__,
+ "remote_write_bytes_aux: bad packet format");
+
+ if (len <= 0)
+ return 0;
payload_size = get_memory_write_packet_size ();
-
+
/* The packet buffer will be large enough for the payload;
get_memory_packet_size ensures this. */
- buf = rs->buf;
+ rs->buf[0] = '\0';
/* Compute the size of the actual payload by subtracting out the
packet header and footer overhead: "$M<memaddr>,<len>:...#nn".
*/
- payload_size -= strlen ("$M,:#NN");
+ payload_size -= strlen ("$,:#NN");
+ if (!use_length)
+ /* The comma won't be used. */
+ payload_size += 1;
+ header_length = strlen (header);
+ payload_size -= header_length;
payload_size -= hexnumlen (memaddr);
- /* Construct the packet header: "[MX]<memaddr>,<len>:". */
+ /* Construct the packet excluding the data: "<header><memaddr>,<len>:". */
- /* Append "[XM]". Compute a best guess of the number of bytes
- actually transfered. */
- p = buf;
- switch (remote_protocol_packets[PACKET_X].support)
+ strcat (rs->buf, header);
+ p = rs->buf + strlen (header);
+
+ /* Compute a best guess of the number of bytes actually transfered. */
+ if (packet_format == 'X')
{
- case PACKET_ENABLE:
- *p++ = 'X';
/* Best guess at number of bytes that will fit. */
todo = min (len, payload_size);
- payload_size -= hexnumlen (todo);
+ if (use_length)
+ payload_size -= hexnumlen (todo);
todo = min (todo, payload_size);
- break;
- case PACKET_DISABLE:
- *p++ = 'M';
+ }
+ else
+ {
/* Num bytes that will fit. */
todo = min (len, payload_size / 2);
- payload_size -= hexnumlen (todo);
+ if (use_length)
+ payload_size -= hexnumlen (todo);
todo = min (todo, payload_size / 2);
- break;
- case PACKET_SUPPORT_UNKNOWN:
- internal_error (__FILE__, __LINE__,
- _("remote_write_bytes: bad internal state"));
- default:
- internal_error (__FILE__, __LINE__, _("bad switch"));
}
+
if (todo <= 0)
internal_error (__FILE__, __LINE__,
_("minumum packet size too small to write data"));
memaddr = remote_address_masked (memaddr);
p += hexnumstr (p, (ULONGEST) memaddr);
- /* Append ",". */
- *p++ = ',';
+ if (use_length)
+ {
+ /* Append ",". */
+ *p++ = ',';
- /* Append <len>. Retain the location/size of <len>. It may need to
- be adjusted once the packet body has been created. */
- plen = p;
- plenlen = hexnumstr (p, (ULONGEST) todo);
- p += plenlen;
+ /* Append <len>. Retain the location/size of <len>. It may need to
+ be adjusted once the packet body has been created. */
+ plen = p;
+ plenlen = hexnumstr (p, (ULONGEST) todo);
+ p += plenlen;
+ }
/* Append ":". */
*p++ = ':';
*p = '\0';
/* Append the packet body. */
- switch (remote_protocol_packets[PACKET_X].support)
+ if (packet_format == 'X')
{
- case PACKET_ENABLE:
/* Binary mode. Send target system values byte by byte, in
increasing byte addresses. Only escape certain critical
characters. */
payload_size);
/* If not all TODO bytes fit, then we'll need another packet. Make
- a second try to keep the end of the packet aligned. */
- if (nr_bytes < todo)
+ a second try to keep the end of the packet aligned. Don't do
+ this if the packet is tiny. */
+ if (nr_bytes < todo && nr_bytes > 2 * REMOTE_ALIGN_WRITES)
{
int new_nr_bytes;
}
p += payload_length;
- if (nr_bytes < todo)
+ if (use_length && nr_bytes < todo)
{
/* Escape chars have filled up the buffer prematurely,
and we have actually sent fewer bytes than planned.
plen += hexnumnstr (plen, (ULONGEST) nr_bytes, plenlen);
*plen = ':'; /* overwrite \0 from hexnumnstr() */
}
- break;
- case PACKET_DISABLE:
+ }
+ else
+ {
/* Normal mode: Send target system values byte by byte, in
increasing byte addresses. Each byte is encoded as a two hex
value. */
nr_bytes = bin2hex (myaddr, p, todo);
p += 2 * nr_bytes;
- break;
- case PACKET_SUPPORT_UNKNOWN:
- internal_error (__FILE__, __LINE__,
- _("remote_write_bytes: bad internal state"));
- default:
- internal_error (__FILE__, __LINE__, _("bad switch"));
}
- putpkt_binary (buf, (int) (p - buf));
+ putpkt_binary (rs->buf, (int) (p - rs->buf));
getpkt (&rs->buf, &rs->buf_size, 0);
- if (buf[0] == 'E')
+ if (rs->buf[0] == 'E')
{
/* There is no correspondance between what the remote protocol
uses for errors and errno codes. We would like a cleaner way
return nr_bytes;
}
+/* Write memory data directly to the remote machine.
+ This does not inform the data cache; the data cache uses this.
+ MEMADDR is the address in the remote memory space.
+ MYADDR is the address of the buffer in our space.
+ LEN is the number of bytes.
+
+ Returns number of bytes transferred, or 0 (setting errno) for
+ error. Only transfer a single packet. */
+
+int
+remote_write_bytes (CORE_ADDR memaddr, const gdb_byte *myaddr, int len)
+{
+ char *packet_format = 0;
+
+ /* Check whether the target supports binary download. */
+ check_binary_download (memaddr);
+
+ switch (remote_protocol_packets[PACKET_X].support)
+ {
+ case PACKET_ENABLE:
+ packet_format = "X";
+ break;
+ case PACKET_DISABLE:
+ packet_format = "M";
+ break;
+ case PACKET_SUPPORT_UNKNOWN:
+ internal_error (__FILE__, __LINE__,
+ _("remote_write_bytes: bad internal state"));
+ default:
+ internal_error (__FILE__, __LINE__, _("bad switch"));
+ }
+
+ return remote_write_bytes_aux (packet_format,
+ memaddr, myaddr, len, packet_format[0], 1);
+}
+
/* Read memory data directly from the remote machine.
This does not use the data cache; the data cache uses this.
MEMADDR is the address in the remote memory space.
remote_read_bytes (CORE_ADDR memaddr, gdb_byte *myaddr, int len)
{
struct remote_state *rs = get_remote_state ();
- char *buf;
int max_buf_size; /* Max size of packet output buffer. */
int origlen;
+ if (len <= 0)
+ return 0;
+
max_buf_size = get_memory_read_packet_size ();
/* The packet buffer will be large enough for the payload;
get_memory_packet_size ensures this. */
- buf = rs->buf;
origlen = len;
while (len > 0)
todo = min (len, max_buf_size / 2); /* num bytes that will fit */
/* construct "m"<memaddr>","<len>" */
- /* sprintf (buf, "m%lx,%x", (unsigned long) memaddr, todo); */
+ /* sprintf (rs->buf, "m%lx,%x", (unsigned long) memaddr, todo); */
memaddr = remote_address_masked (memaddr);
- p = buf;
+ p = rs->buf;
*p++ = 'm';
p += hexnumstr (p, (ULONGEST) memaddr);
*p++ = ',';
p += hexnumstr (p, (ULONGEST) todo);
*p = '\0';
- putpkt (buf);
+ putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
- if (buf[0] == 'E'
- && isxdigit (buf[1]) && isxdigit (buf[2])
- && buf[3] == '\0')
+ if (rs->buf[0] == 'E'
+ && isxdigit (rs->buf[1]) && isxdigit (rs->buf[2])
+ && rs->buf[3] == '\0')
{
/* There is no correspondance between what the remote
protocol uses for errors and errno codes. We would like
/* Reply describes memory byte by byte,
each byte encoded as two hex characters. */
- p = buf;
+ p = rs->buf;
if ((i = hex2bin (p, myaddr, todo)) < todo)
{
/* Reply is short. This means that we were able to read
int should_write, struct mem_attrib *attrib,
struct target_ops *target)
{
- CORE_ADDR targ_addr;
- int targ_len;
int res;
- /* Should this be the selected frame? */
- gdbarch_remote_translate_xfer_address (current_gdbarch,
- current_regcache,
- mem_addr, mem_len,
- &targ_addr, &targ_len);
- if (targ_len <= 0)
- return 0;
-
if (should_write)
- res = remote_write_bytes (targ_addr, buffer, targ_len);
+ res = remote_write_bytes (mem_addr, buffer, mem_len);
else
- res = remote_read_bytes (targ_addr, buffer, targ_len);
+ res = remote_read_bytes (mem_addr, buffer, mem_len);
return res;
}
+/* Sends a packet with content determined by the printf format string
+ FORMAT and the remaining arguments, then gets the reply. Returns
+ whether the packet was a success, a failure, or unknown. */
+
+enum packet_result
+remote_send_printf (const char *format, ...)
+{
+ struct remote_state *rs = get_remote_state ();
+ int max_size = get_remote_packet_size ();
+
+ va_list ap;
+ va_start (ap, format);
+
+ rs->buf[0] = '\0';
+ if (vsnprintf (rs->buf, max_size, format, ap) >= max_size)
+ internal_error (__FILE__, __LINE__, "Too long remote packet.");
+
+ if (putpkt (rs->buf) < 0)
+ error (_("Communication problem with target."));
+
+ rs->buf[0] = '\0';
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ return packet_check_result (rs->buf);
+}
+
static void
-remote_files_info (struct target_ops *ignore)
+restore_remote_timeout (void *p)
{
- puts_filtered ("Debugging a target over a serial line.\n");
+ int value = *(int *)p;
+ remote_timeout = value;
}
-\f
-/* Stuff for dealing with the packets which are part of this protocol.
- See comment at top of file for details. */
-/* Read a single character from the remote end. */
+/* Flash writing can take quite some time. We'll set
+ effectively infinite timeout for flash operations.
+ In future, we'll need to decide on a better approach. */
+static const int remote_flash_timeout = 1000;
-static int
-readchar (int timeout)
+static void
+remote_flash_erase (struct target_ops *ops,
+ ULONGEST address, LONGEST length)
{
- int ch;
+ int saved_remote_timeout = remote_timeout;
+ enum packet_result ret;
- ch = serial_readchar (remote_desc, timeout);
-
- if (ch >= 0)
- return ch;
+ struct cleanup *back_to = make_cleanup (restore_remote_timeout,
+ &saved_remote_timeout);
+ remote_timeout = remote_flash_timeout;
- switch ((enum serial_rc) ch)
+ ret = remote_send_printf ("vFlashErase:%s,%s",
+ paddr (address),
+ phex (length, 4));
+ switch (ret)
{
- case SERIAL_EOF:
- target_mourn_inferior ();
- error (_("Remote connection closed"));
- /* no return */
- case SERIAL_ERROR:
- perror_with_name (_("Remote communication error"));
- /* no return */
+ case PACKET_UNKNOWN:
+ error (_("Remote target does not support flash erase"));
+ case PACKET_ERROR:
+ error (_("Error erasing flash with vFlashErase packet"));
+ default:
+ break;
+ }
+
+ do_cleanups (back_to);
+}
+
+static LONGEST
+remote_flash_write (struct target_ops *ops,
+ ULONGEST address, LONGEST length,
+ const gdb_byte *data)
+{
+ int saved_remote_timeout = remote_timeout;
+ int ret;
+ struct cleanup *back_to = make_cleanup (restore_remote_timeout,
+ &saved_remote_timeout);
+
+ remote_timeout = remote_flash_timeout;
+ ret = remote_write_bytes_aux ("vFlashWrite:", address, data, length, 'X', 0);
+ do_cleanups (back_to);
+
+ return ret;
+}
+
+static void
+remote_flash_done (struct target_ops *ops)
+{
+ int saved_remote_timeout = remote_timeout;
+ int ret;
+ struct cleanup *back_to = make_cleanup (restore_remote_timeout,
+ &saved_remote_timeout);
+
+ remote_timeout = remote_flash_timeout;
+ ret = remote_send_printf ("vFlashDone");
+ do_cleanups (back_to);
+
+ switch (ret)
+ {
+ case PACKET_UNKNOWN:
+ error (_("Remote target does not support vFlashDone"));
+ case PACKET_ERROR:
+ error (_("Error finishing flash operation"));
+ default:
+ break;
+ }
+}
+
+static void
+remote_files_info (struct target_ops *ignore)
+{
+ puts_filtered ("Debugging a target over a serial line.\n");
+}
+\f
+/* Stuff for dealing with the packets which are part of this protocol.
+ See comment at top of file for details. */
+
+/* Read a single character from the remote end. */
+
+static int
+readchar (int timeout)
+{
+ int ch;
+
+ ch = serial_readchar (remote_desc, timeout);
+
+ if (ch >= 0)
+ return ch;
+
+ switch ((enum serial_rc) ch)
+ {
+ case SERIAL_EOF:
+ target_mourn_inferior ();
+ error (_("Remote connection closed"));
+ /* no return */
+ case SERIAL_ERROR:
+ perror_with_name (_("Remote communication error"));
+ /* no return */
case SERIAL_TIMEOUT:
break;
}
case '$':
{
if (remote_debug)
- fprintf_unfiltered (gdb_stdlog,
+ fprintf_unfiltered (gdb_stdlog,
"Packet instead of Ack, ignoring it\n");
/* It's probably an old response sent because an ACK
was lost. Gobble up the packet and ack it so it
if (check_0 == SERIAL_TIMEOUT || check_1 == SERIAL_TIMEOUT)
{
if (remote_debug)
- fputs_filtered ("Timeout in checksum, retrying\n",
+ fputs_filtered ("Timeout in checksum, retrying\n",
gdb_stdlog);
return -1;
}
else if (check_0 < 0 || check_1 < 0)
{
if (remote_debug)
- fputs_filtered ("Communication error in checksum\n",
+ fputs_filtered ("Communication error in checksum\n",
gdb_stdlog);
return -1;
}
{
QUIT;
target_mourn_inferior ();
- error (_("Watchdog has expired. Target detached."));
+ error (_("Watchdog timeout has expired. Target detached."));
}
if (remote_debug)
fputs_filtered ("Timed out.\n", gdb_stdlog);
serial_write (remote_desc, "-", 1);
}
- /* We have tried hard enough, and just can't receive the packet.
+ /* We have tried hard enough, and just can't receive the packet.
Give up. */
printf_unfiltered (_("Ignoring packet error, continuing...\n"));
/* Now restart the remote server. */
extended_remote_restart ();
+ /* NOTE: We don't need to recheck for a target description here; but
+ if we gain the ability to switch the remote executable we may
+ need to, if for instance we are running a process which requested
+ different emulated hardware from the operating system. A
+ concrete example of this is ARM GNU/Linux, where some binaries
+ will have a legacy FPA coprocessor emulated and others may have
+ access to a hardware VFP unit. */
+
/* Now put the breakpoints back in. This way we're safe if the
restart function works via a unix fork on the remote side. */
insert_breakpoints ();
/* Now restart the remote server. */
extended_remote_restart ();
+ /* NOTE: We don't need to recheck for a target description here; but
+ if we gain the ability to switch the remote executable we may
+ need to, if for instance we are running a process which requested
+ different emulated hardware from the operating system. A
+ concrete example of this is ARM GNU/Linux, where some binaries
+ will have a legacy FPA coprocessor emulated and others may have
+ access to a hardware VFP unit. */
+
/* Now put the breakpoints back in. This way we're safe if the
restart function works via a unix fork on the remote side. */
insert_breakpoints ();
}
\f
-/* On some machines, e.g. 68k, we may use a different breakpoint
- instruction than other targets; in those use
- DEPRECATED_REMOTE_BREAKPOINT instead of just BREAKPOINT_FROM_PC.
- Also, bi-endian targets may define
- DEPRECATED_LITTLE_REMOTE_BREAKPOINT and
- DEPRECATED_BIG_REMOTE_BREAKPOINT. If none of these are defined, we
- just call the standard routines that are in mem-break.c. */
-
-/* NOTE: cagney/2003-06-08: This is silly. A remote and simulator
- target should use an identical BREAKPOINT_FROM_PC. As for native,
- the ARCH-OS-tdep.c code can override the default. */
-
-#if defined (DEPRECATED_LITTLE_REMOTE_BREAKPOINT) && defined (DEPRECATED_BIG_REMOTE_BREAKPOINT) && !defined(DEPRECATED_REMOTE_BREAKPOINT)
-#define DEPRECATED_REMOTE_BREAKPOINT
-#endif
-
-#ifdef DEPRECATED_REMOTE_BREAKPOINT
-
-/* If the target isn't bi-endian, just pretend it is. */
-#if !defined (DEPRECATED_LITTLE_REMOTE_BREAKPOINT) && !defined (DEPRECATED_BIG_REMOTE_BREAKPOINT)
-#define DEPRECATED_LITTLE_REMOTE_BREAKPOINT DEPRECATED_REMOTE_BREAKPOINT
-#define DEPRECATED_BIG_REMOTE_BREAKPOINT DEPRECATED_REMOTE_BREAKPOINT
-#endif
-
-static unsigned char big_break_insn[] = DEPRECATED_BIG_REMOTE_BREAKPOINT;
-static unsigned char little_break_insn[] = DEPRECATED_LITTLE_REMOTE_BREAKPOINT;
-
-#endif /* DEPRECATED_REMOTE_BREAKPOINT */
-
/* Insert a breakpoint. On targets that have software breakpoint
support, we ask the remote target to do the work; on targets
which don't, we insert a traditional memory breakpoint. */
{
CORE_ADDR addr = bp_tgt->placed_address;
struct remote_state *rs = get_remote_state ();
-#ifdef DEPRECATED_REMOTE_BREAKPOINT
- int val;
-#endif
/* Try the "Z" s/w breakpoint packet if it is not already disabled.
If it succeeds, then set the support to PACKET_ENABLE. If it
*(p++) = 'Z';
*(p++) = '0';
*(p++) = ',';
- BREAKPOINT_FROM_PC (&bp_tgt->placed_address, &bp_tgt->placed_size);
+ gdbarch_breakpoint_from_pc
+ (current_gdbarch, &bp_tgt->placed_address, &bp_tgt->placed_size);
addr = (ULONGEST) remote_address_masked (bp_tgt->placed_address);
p += hexnumstr (p, addr);
sprintf (p, ",%d", bp_tgt->placed_size);
}
}
-#ifdef DEPRECATED_REMOTE_BREAKPOINT
- bp_tgt->placed_size = bp_tgt->shadow_len = sizeof big_break_insn;
- val = target_read_memory (addr, bp_tgt->shadow_contents, bp_tgt->shadow_len);
-
- if (val == 0)
- {
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- val = target_write_memory (addr, (char *) big_break_insn,
- sizeof big_break_insn);
- else
- val = target_write_memory (addr, (char *) little_break_insn,
- sizeof little_break_insn);
- }
-
- return val;
-#else
return memory_insert_breakpoint (bp_tgt);
-#endif /* DEPRECATED_REMOTE_BREAKPOINT */
}
static int
return (rs->buf[0] == 'E');
}
-#ifdef DEPRECATED_REMOTE_BREAKPOINT
- return target_write_memory (bp_tgt->placed_address, bp_tgt->shadow_contents,
- bp_tgt->shadow_len);
-#else
return memory_remove_breakpoint (bp_tgt);
-#endif /* DEPRECATED_REMOTE_BREAKPOINT */
}
static int
return remote_stopped_by_watchpoint_p;
}
-extern int stepped_after_stopped_by_watchpoint;
-
static int
remote_stopped_data_address (struct target_ops *target, CORE_ADDR *addr_p)
{
int rc = 0;
- if (remote_stopped_by_watchpoint ()
- || stepped_after_stopped_by_watchpoint)
+ if (remote_stopped_by_watchpoint ())
{
*addr_p = remote_watch_data_address;
rc = 1;
/* The length field should be set to the size of a breakpoint
instruction, even though we aren't inserting one ourselves. */
- BREAKPOINT_FROM_PC (&bp_tgt->placed_address, &bp_tgt->placed_size);
+ gdbarch_breakpoint_from_pc
+ (current_gdbarch, &bp_tgt->placed_address, &bp_tgt->placed_size);
if (remote_protocol_packets[PACKET_Z1].support == PACKET_DISABLE)
return -1;
-
+
*(p++) = 'Z';
*(p++) = '1';
*(p++) = ',';
printf_filtered (_("No loaded section named '%s'.\n"), args);
}
+/* Write LEN bytes from WRITEBUF into OBJECT_NAME/ANNEX at OFFSET
+ into remote target. The number of bytes written to the remote
+ target is returned, or -1 for error. */
+
+static LONGEST
+remote_write_qxfer (struct target_ops *ops, const char *object_name,
+ const char *annex, const gdb_byte *writebuf,
+ ULONGEST offset, LONGEST len,
+ struct packet_config *packet)
+{
+ int i, buf_len;
+ ULONGEST n;
+ gdb_byte *wbuf;
+ struct remote_state *rs = get_remote_state ();
+ int max_size = get_memory_write_packet_size ();
+
+ if (packet->support == PACKET_DISABLE)
+ return -1;
+
+ /* Insert header. */
+ i = snprintf (rs->buf, max_size,
+ "qXfer:%s:write:%s:%s:",
+ object_name, annex ? annex : "",
+ phex_nz (offset, sizeof offset));
+ max_size -= (i + 1);
+
+ /* Escape as much data as fits into rs->buf. */
+ buf_len = remote_escape_output
+ (writebuf, len, (rs->buf + i), &max_size, max_size);
+
+ if (putpkt_binary (rs->buf, i + buf_len) < 0
+ || getpkt_sane (&rs->buf, &rs->buf_size, 0) < 0
+ || packet_ok (rs->buf, packet) != PACKET_OK)
+ return -1;
+
+ unpack_varlen_hex (rs->buf, &n);
+ return n;
+}
+
/* Read OBJECT_NAME/ANNEX from the remote target using a qXfer packet.
Data at OFFSET, of up to LEN bytes, is read into READBUF; the
number of bytes read is returned, or 0 for EOF, or -1 for error.
i = remote_unescape_input (rs->buf + 1, packet_len - 1, readbuf, n);
/* 'l' is an EOF marker, possibly including a final block of data,
- or possibly empty. Record it to bypass the next read, if one is
- issued. */
- if (rs->buf[0] == 'l')
+ or possibly empty. If we have the final block of a non-empty
+ object, record this fact to bypass a subsequent partial read. */
+ if (rs->buf[0] == 'l' && offset + i > 0)
{
finished_object = xstrdup (object_name);
finished_annex = xstrdup (annex ? annex : "");
char *p2;
char query_type;
- /* Handle memory using remote_xfer_memory. */
+ /* Handle memory using the standard memory routines. */
if (object == TARGET_OBJECT_MEMORY)
{
int xfered;
errno = 0;
if (writebuf != NULL)
- {
- void *buffer = xmalloc (len);
- struct cleanup *cleanup = make_cleanup (xfree, buffer);
- memcpy (buffer, writebuf, len);
- xfered = remote_xfer_memory (offset, buffer, len, 1, NULL, ops);
- do_cleanups (cleanup);
- }
+ xfered = remote_write_bytes (offset, writebuf, len);
else
- xfered = remote_xfer_memory (offset, readbuf, len, 0, NULL, ops);
+ xfered = remote_read_bytes (offset, readbuf, len);
if (xfered > 0)
return xfered;
return -1;
}
- /* Only handle reads. */
- if (writebuf != NULL || readbuf == NULL)
- return -1;
+ /* Handle SPU memory using qxfer packets. */
+ if (object == TARGET_OBJECT_SPU)
+ {
+ if (readbuf)
+ return remote_read_qxfer (ops, "spu", annex, readbuf, offset, len,
+ &remote_protocol_packets
+ [PACKET_qXfer_spu_read]);
+ else
+ return remote_write_qxfer (ops, "spu", annex, writebuf, offset, len,
+ &remote_protocol_packets
+ [PACKET_qXfer_spu_write]);
+ }
+
+ /* Only handle flash writes. */
+ if (writebuf != NULL)
+ {
+ LONGEST xfered;
+
+ switch (object)
+ {
+ case TARGET_OBJECT_FLASH:
+ xfered = remote_flash_write (ops, offset, len, writebuf);
+
+ if (xfered > 0)
+ return xfered;
+ else if (xfered == 0 && errno == 0)
+ return 0;
+ else
+ return -1;
+
+ default:
+ return -1;
+ }
+ }
/* Map pre-existing objects onto letters. DO NOT do this for new
objects!!! Instead specify new query packets. */
return remote_read_qxfer (ops, "auxv", annex, readbuf, offset, len,
&remote_protocol_packets[PACKET_qXfer_auxv]);
+ case TARGET_OBJECT_AVAILABLE_FEATURES:
+ return remote_read_qxfer
+ (ops, "features", annex, readbuf, offset, len,
+ &remote_protocol_packets[PACKET_qXfer_features]);
+
+ case TARGET_OBJECT_LIBRARIES:
+ return remote_read_qxfer
+ (ops, "libraries", annex, readbuf, offset, len,
+ &remote_protocol_packets[PACKET_qXfer_libraries]);
+
+ case TARGET_OBJECT_MEMORY_MAP:
+ gdb_assert (annex == NULL);
+ return remote_read_qxfer (ops, "memory-map", annex, readbuf, offset, len,
+ &remote_protocol_packets[PACKET_qXfer_memory_map]);
+
default:
return -1;
}
struct ui_file *outbuf)
{
struct remote_state *rs = get_remote_state ();
- char *buf = rs->buf;
- char *p = buf;
+ char *p = rs->buf;
if (!remote_desc)
error (_("remote rcmd is only available after target open"));
command = "";
/* The query prefix. */
- strcpy (buf, "qRcmd,");
- p = strchr (buf, '\0');
+ strcpy (rs->buf, "qRcmd,");
+ p = strchr (rs->buf, '\0');
- if ((strlen (buf) + strlen (command) * 2 + 8/*misc*/) > get_remote_packet_size ())
+ if ((strlen (rs->buf) + strlen (command) * 2 + 8/*misc*/) > get_remote_packet_size ())
error (_("\"monitor\" command ``%s'' is too long."), command);
/* Encode the actual command. */
/* get/display the response */
while (1)
{
+ char *buf;
+
/* XXX - see also tracepoint.c:remote_get_noisy_reply(). */
- buf[0] = '\0';
+ rs->buf[0] = '\0';
getpkt (&rs->buf, &rs->buf_size, 0);
+ buf = rs->buf;
if (buf[0] == '\0')
error (_("Target does not support this command."));
if (buf[0] == 'O' && buf[1] != 'K')
}
}
+static VEC(mem_region_s) *
+remote_memory_map (struct target_ops *ops)
+{
+ VEC(mem_region_s) *result = NULL;
+ char *text = target_read_stralloc (¤t_target,
+ TARGET_OBJECT_MEMORY_MAP, NULL);
+
+ if (text)
+ {
+ struct cleanup *back_to = make_cleanup (xfree, text);
+ result = parse_memory_map (text);
+ do_cleanups (back_to);
+ }
+
+ return result;
+}
+
static void
packet_command (char *args, int from_tty)
{
{
static char buf[32];
- xsnprintf (buf, sizeof buf, "thread %d", ptid_get_pid (ptid));
+ xsnprintf (buf, sizeof buf, "Thread %d", ptid_get_pid (ptid));
return buf;
}
return 0;
}
+/* Support for inferring a target description based on the current
+ architecture and the size of a 'g' packet. While the 'g' packet
+ can have any size (since optional registers can be left off the
+ end), some sizes are easily recognizable given knowledge of the
+ approximate architecture. */
+
+struct remote_g_packet_guess
+{
+ int bytes;
+ const struct target_desc *tdesc;
+};
+typedef struct remote_g_packet_guess remote_g_packet_guess_s;
+DEF_VEC_O(remote_g_packet_guess_s);
+
+struct remote_g_packet_data
+{
+ VEC(remote_g_packet_guess_s) *guesses;
+};
+
+static struct gdbarch_data *remote_g_packet_data_handle;
+
+static void *
+remote_g_packet_data_init (struct obstack *obstack)
+{
+ return OBSTACK_ZALLOC (obstack, struct remote_g_packet_data);
+}
+
+void
+register_remote_g_packet_guess (struct gdbarch *gdbarch, int bytes,
+ const struct target_desc *tdesc)
+{
+ struct remote_g_packet_data *data
+ = gdbarch_data (gdbarch, remote_g_packet_data_handle);
+ struct remote_g_packet_guess new_guess, *guess;
+ int ix;
+
+ gdb_assert (tdesc != NULL);
+
+ for (ix = 0;
+ VEC_iterate (remote_g_packet_guess_s, data->guesses, ix, guess);
+ ix++)
+ if (guess->bytes == bytes)
+ internal_error (__FILE__, __LINE__,
+ "Duplicate g packet description added for size %d",
+ bytes);
+
+ new_guess.bytes = bytes;
+ new_guess.tdesc = tdesc;
+ VEC_safe_push (remote_g_packet_guess_s, data->guesses, &new_guess);
+}
+
+static const struct target_desc *
+remote_read_description (struct target_ops *target)
+{
+ struct remote_g_packet_data *data
+ = gdbarch_data (current_gdbarch, remote_g_packet_data_handle);
+
+ if (!VEC_empty (remote_g_packet_guess_s, data->guesses))
+ {
+ struct remote_g_packet_guess *guess;
+ int ix;
+ int bytes = send_g_packet ();
+
+ for (ix = 0;
+ VEC_iterate (remote_g_packet_guess_s, data->guesses, ix, guess);
+ ix++)
+ if (guess->bytes == bytes)
+ return guess->tdesc;
+
+ /* We discard the g packet. A minor optimization would be to
+ hold on to it, and fill the register cache once we have selected
+ an architecture, but it's too tricky to do safely. */
+ }
+
+ return NULL;
+}
+
+/* Remote file transfer support. This is host-initiated I/O, not
+ target-initiated; for target-initiated, see remote-fileio.c. */
+
+/* If *LEFT is at least the length of STRING, copy STRING to
+ *BUFFER, update *BUFFER to point to the new end of the buffer, and
+ decrease *LEFT. Otherwise raise an error. */
+
+static void
+remote_buffer_add_string (char **buffer, int *left, char *string)
+{
+ int len = strlen (string);
+
+ if (len > *left)
+ error (_("Packet too long for target."));
+
+ memcpy (*buffer, string, len);
+ *buffer += len;
+ *left -= len;
+
+ /* NUL-terminate the buffer as a convenience, if there is
+ room. */
+ if (*left)
+ **buffer = '\0';
+}
+
+/* If *LEFT is large enough, hex encode LEN bytes from BYTES into
+ *BUFFER, update *BUFFER to point to the new end of the buffer, and
+ decrease *LEFT. Otherwise raise an error. */
+
+static void
+remote_buffer_add_bytes (char **buffer, int *left, const gdb_byte *bytes,
+ int len)
+{
+ if (2 * len > *left)
+ error (_("Packet too long for target."));
+
+ bin2hex (bytes, *buffer, len);
+ *buffer += 2 * len;
+ *left -= 2 * len;
+
+ /* NUL-terminate the buffer as a convenience, if there is
+ room. */
+ if (*left)
+ **buffer = '\0';
+}
+
+/* If *LEFT is large enough, convert VALUE to hex and add it to
+ *BUFFER, update *BUFFER to point to the new end of the buffer, and
+ decrease *LEFT. Otherwise raise an error. */
+
+static void
+remote_buffer_add_int (char **buffer, int *left, ULONGEST value)
+{
+ int len = hexnumlen (value);
+
+ if (len > *left)
+ error (_("Packet too long for target."));
+
+ hexnumstr (*buffer, value);
+ *buffer += len;
+ *left -= len;
+
+ /* NUL-terminate the buffer as a convenience, if there is
+ room. */
+ if (*left)
+ **buffer = '\0';
+}
+
+/* Parse an I/O result packet from BUFFER. Set RETCODE to the return
+ value, *REMOTE_ERRNO to the remote error number or zero if none
+ was included, and *ATTACHMENT to point to the start of the annex
+ if any. The length of the packet isn't needed here; there may
+ be NUL bytes in BUFFER, but they will be after *ATTACHMENT.
+
+ Return 0 if the packet could be parsed, -1 if it could not. If
+ -1 is returned, the other variables may not be initialized. */
+
+static int
+remote_hostio_parse_result (char *buffer, int *retcode,
+ int *remote_errno, char **attachment)
+{
+ char *p, *p2;
+
+ *remote_errno = 0;
+ *attachment = NULL;
+
+ if (buffer[0] != 'F')
+ return -1;
+
+ errno = 0;
+ *retcode = strtol (&buffer[1], &p, 16);
+ if (errno != 0 || p == &buffer[1])
+ return -1;
+
+ /* Check for ",errno". */
+ if (*p == ',')
+ {
+ errno = 0;
+ *remote_errno = strtol (p + 1, &p2, 16);
+ if (errno != 0 || p + 1 == p2)
+ return -1;
+ p = p2;
+ }
+
+ /* Check for ";attachment". If there is no attachment, the
+ packet should end here. */
+ if (*p == ';')
+ {
+ *attachment = p + 1;
+ return 0;
+ }
+ else if (*p == '\0')
+ return 0;
+ else
+ return -1;
+}
+
+/* Send a prepared I/O packet to the target and read its response.
+ The prepared packet is in the global RS->BUF before this function
+ is called, and the answer is there when we return.
+
+ COMMAND_BYTES is the length of the request to send, which may include
+ binary data. WHICH_PACKET is the packet configuration to check
+ before attempting a packet. If an error occurs, *REMOTE_ERRNO
+ is set to the error number and -1 is returned. Otherwise the value
+ returned by the function is returned.
+
+ ATTACHMENT and ATTACHMENT_LEN should be non-NULL if and only if an
+ attachment is expected; an error will be reported if there's a
+ mismatch. If one is found, *ATTACHMENT will be set to point into
+ the packet buffer and *ATTACHMENT_LEN will be set to the
+ attachment's length. */
+
+static int
+remote_hostio_send_command (int command_bytes, int which_packet,
+ int *remote_errno, char **attachment,
+ int *attachment_len)
+{
+ struct remote_state *rs = get_remote_state ();
+ int ret, bytes_read;
+ char *attachment_tmp;
+
+ if (remote_protocol_packets[which_packet].support == PACKET_DISABLE)
+ {
+ *remote_errno = FILEIO_ENOSYS;
+ return -1;
+ }
+
+ putpkt_binary (rs->buf, command_bytes);
+ bytes_read = getpkt_sane (&rs->buf, &rs->buf_size, 0);
+
+ /* If it timed out, something is wrong. Don't try to parse the
+ buffer. */
+ if (bytes_read < 0)
+ {
+ *remote_errno = FILEIO_EINVAL;
+ return -1;
+ }
+
+ switch (packet_ok (rs->buf, &remote_protocol_packets[which_packet]))
+ {
+ case PACKET_ERROR:
+ *remote_errno = FILEIO_EINVAL;
+ return -1;
+ case PACKET_UNKNOWN:
+ *remote_errno = FILEIO_ENOSYS;
+ return -1;
+ case PACKET_OK:
+ break;
+ }
+
+ if (remote_hostio_parse_result (rs->buf, &ret, remote_errno,
+ &attachment_tmp))
+ {
+ *remote_errno = FILEIO_EINVAL;
+ return -1;
+ }
+
+ /* Make sure we saw an attachment if and only if we expected one. */
+ if ((attachment_tmp == NULL && attachment != NULL)
+ || (attachment_tmp != NULL && attachment == NULL))
+ {
+ *remote_errno = FILEIO_EINVAL;
+ return -1;
+ }
+
+ /* If an attachment was found, it must point into the packet buffer;
+ work out how many bytes there were. */
+ if (attachment_tmp != NULL)
+ {
+ *attachment = attachment_tmp;
+ *attachment_len = bytes_read - (*attachment - rs->buf);
+ }
+
+ return ret;
+}
+
+/* Open FILENAME on the remote target, using FLAGS and MODE. Return a
+ remote file descriptor, or -1 if an error occurs (and set
+ *REMOTE_ERRNO). */
+
+static int
+remote_hostio_open (const char *filename, int flags, int mode,
+ int *remote_errno)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ int left = get_remote_packet_size () - 1;
+
+ remote_buffer_add_string (&p, &left, "vFile:open:");
+
+ remote_buffer_add_bytes (&p, &left, (const gdb_byte *) filename,
+ strlen (filename));
+ remote_buffer_add_string (&p, &left, ",");
+
+ remote_buffer_add_int (&p, &left, flags);
+ remote_buffer_add_string (&p, &left, ",");
+
+ remote_buffer_add_int (&p, &left, mode);
+
+ return remote_hostio_send_command (p - rs->buf, PACKET_vFile_open,
+ remote_errno, NULL, NULL);
+}
+
+/* Write up to LEN bytes from WRITE_BUF to FD on the remote target.
+ Return the number of bytes written, or -1 if an error occurs (and
+ set *REMOTE_ERRNO). */
+
+static int
+remote_hostio_pwrite (int fd, const gdb_byte *write_buf, int len,
+ ULONGEST offset, int *remote_errno)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ int left = get_remote_packet_size ();
+ int out_len;
+
+ remote_buffer_add_string (&p, &left, "vFile:pwrite:");
+
+ remote_buffer_add_int (&p, &left, fd);
+ remote_buffer_add_string (&p, &left, ",");
+
+ remote_buffer_add_int (&p, &left, offset);
+ remote_buffer_add_string (&p, &left, ",");
+
+ p += remote_escape_output (write_buf, len, p, &out_len,
+ get_remote_packet_size () - (p - rs->buf));
+
+ return remote_hostio_send_command (p - rs->buf, PACKET_vFile_pwrite,
+ remote_errno, NULL, NULL);
+}
+
+/* Read up to LEN bytes FD on the remote target into READ_BUF
+ Return the number of bytes read, or -1 if an error occurs (and
+ set *REMOTE_ERRNO). */
+
+static int
+remote_hostio_pread (int fd, gdb_byte *read_buf, int len,
+ ULONGEST offset, int *remote_errno)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ char *attachment;
+ int left = get_remote_packet_size ();
+ int ret, attachment_len;
+ int read_len;
+
+ remote_buffer_add_string (&p, &left, "vFile:pread:");
+
+ remote_buffer_add_int (&p, &left, fd);
+ remote_buffer_add_string (&p, &left, ",");
+
+ remote_buffer_add_int (&p, &left, len);
+ remote_buffer_add_string (&p, &left, ",");
+
+ remote_buffer_add_int (&p, &left, offset);
+
+ ret = remote_hostio_send_command (p - rs->buf, PACKET_vFile_pread,
+ remote_errno, &attachment,
+ &attachment_len);
+
+ if (ret < 0)
+ return ret;
+
+ read_len = remote_unescape_input (attachment, attachment_len,
+ read_buf, len);
+ if (read_len != ret)
+ error (_("Read returned %d, but %d bytes."), ret, (int) read_len);
+
+ return ret;
+}
+
+/* Close FD on the remote target. Return 0, or -1 if an error occurs
+ (and set *REMOTE_ERRNO). */
+
+static int
+remote_hostio_close (int fd, int *remote_errno)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ int left = get_remote_packet_size () - 1;
+
+ remote_buffer_add_string (&p, &left, "vFile:close:");
+
+ remote_buffer_add_int (&p, &left, fd);
+
+ return remote_hostio_send_command (p - rs->buf, PACKET_vFile_close,
+ remote_errno, NULL, NULL);
+}
+
+/* Unlink FILENAME on the remote target. Return 0, or -1 if an error
+ occurs (and set *REMOTE_ERRNO). */
+
+static int
+remote_hostio_unlink (const char *filename, int *remote_errno)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ int left = get_remote_packet_size () - 1;
+
+ remote_buffer_add_string (&p, &left, "vFile:unlink:");
+
+ remote_buffer_add_bytes (&p, &left, (const gdb_byte *) filename,
+ strlen (filename));
+
+ return remote_hostio_send_command (p - rs->buf, PACKET_vFile_unlink,
+ remote_errno, NULL, NULL);
+}
+
+static int
+remote_fileio_errno_to_host (int errnum)
+{
+ switch (errnum)
+ {
+ case FILEIO_EPERM:
+ return EPERM;
+ case FILEIO_ENOENT:
+ return ENOENT;
+ case FILEIO_EINTR:
+ return EINTR;
+ case FILEIO_EIO:
+ return EIO;
+ case FILEIO_EBADF:
+ return EBADF;
+ case FILEIO_EACCES:
+ return EACCES;
+ case FILEIO_EFAULT:
+ return EFAULT;
+ case FILEIO_EBUSY:
+ return EBUSY;
+ case FILEIO_EEXIST:
+ return EEXIST;
+ case FILEIO_ENODEV:
+ return ENODEV;
+ case FILEIO_ENOTDIR:
+ return ENOTDIR;
+ case FILEIO_EISDIR:
+ return EISDIR;
+ case FILEIO_EINVAL:
+ return EINVAL;
+ case FILEIO_ENFILE:
+ return ENFILE;
+ case FILEIO_EMFILE:
+ return EMFILE;
+ case FILEIO_EFBIG:
+ return EFBIG;
+ case FILEIO_ENOSPC:
+ return ENOSPC;
+ case FILEIO_ESPIPE:
+ return ESPIPE;
+ case FILEIO_EROFS:
+ return EROFS;
+ case FILEIO_ENOSYS:
+ return ENOSYS;
+ case FILEIO_ENAMETOOLONG:
+ return ENAMETOOLONG;
+ }
+ return -1;
+}
+
+static char *
+remote_hostio_error (int errnum)
+{
+ int host_error = remote_fileio_errno_to_host (errnum);
+
+ if (host_error == -1)
+ error (_("Unknown remote I/O error %d"), errnum);
+ else
+ error (_("Remote I/O error: %s"), safe_strerror (host_error));
+}
+
+static void
+fclose_cleanup (void *file)
+{
+ fclose (file);
+}
+
+static void
+remote_hostio_close_cleanup (void *opaque)
+{
+ int fd = *(int *) opaque;
+ int remote_errno;
+
+ remote_hostio_close (fd, &remote_errno);
+}
+
+void
+remote_file_put (const char *local_file, const char *remote_file, int from_tty)
+{
+ struct cleanup *back_to, *close_cleanup;
+ int retcode, fd, remote_errno, bytes, io_size;
+ FILE *file;
+ gdb_byte *buffer;
+ int bytes_in_buffer;
+ int saw_eof;
+ ULONGEST offset;
+
+ if (!remote_desc)
+ error (_("command can only be used with remote target"));
+
+ file = fopen (local_file, "rb");
+ if (file == NULL)
+ perror_with_name (local_file);
+ back_to = make_cleanup (fclose_cleanup, file);
+
+ fd = remote_hostio_open (remote_file, (FILEIO_O_WRONLY | FILEIO_O_CREAT
+ | FILEIO_O_TRUNC),
+ 0700, &remote_errno);
+ if (fd == -1)
+ remote_hostio_error (remote_errno);
+
+ /* Send up to this many bytes at once. They won't all fit in the
+ remote packet limit, so we'll transfer slightly fewer. */
+ io_size = get_remote_packet_size ();
+ buffer = xmalloc (io_size);
+ make_cleanup (xfree, buffer);
+
+ close_cleanup = make_cleanup (remote_hostio_close_cleanup, &fd);
+
+ bytes_in_buffer = 0;
+ saw_eof = 0;
+ offset = 0;
+ while (bytes_in_buffer || !saw_eof)
+ {
+ if (!saw_eof)
+ {
+ bytes = fread (buffer + bytes_in_buffer, 1, io_size - bytes_in_buffer,
+ file);
+ if (bytes == 0)
+ {
+ if (ferror (file))
+ error (_("Error reading %s."), local_file);
+ else
+ {
+ /* EOF. Unless there is something still in the
+ buffer from the last iteration, we are done. */
+ saw_eof = 1;
+ if (bytes_in_buffer == 0)
+ break;
+ }
+ }
+ }
+ else
+ bytes = 0;
+
+ bytes += bytes_in_buffer;
+ bytes_in_buffer = 0;
+
+ retcode = remote_hostio_pwrite (fd, buffer, bytes, offset, &remote_errno);
+
+ if (retcode < 0)
+ remote_hostio_error (remote_errno);
+ else if (retcode == 0)
+ error (_("Remote write of %d bytes returned 0!"), bytes);
+ else if (retcode < bytes)
+ {
+ /* Short write. Save the rest of the read data for the next
+ write. */
+ bytes_in_buffer = bytes - retcode;
+ memmove (buffer, buffer + retcode, bytes_in_buffer);
+ }
+
+ offset += retcode;
+ }
+
+ discard_cleanups (close_cleanup);
+ if (remote_hostio_close (fd, &remote_errno))
+ remote_hostio_error (remote_errno);
+
+ if (from_tty)
+ printf_filtered (_("Successfully sent file \"%s\".\n"), local_file);
+ do_cleanups (back_to);
+}
+
+void
+remote_file_get (const char *remote_file, const char *local_file, int from_tty)
+{
+ struct cleanup *back_to, *close_cleanup;
+ int retcode, fd, remote_errno, bytes, io_size;
+ FILE *file;
+ gdb_byte *buffer;
+ ULONGEST offset;
+
+ if (!remote_desc)
+ error (_("command can only be used with remote target"));
+
+ fd = remote_hostio_open (remote_file, FILEIO_O_RDONLY, 0, &remote_errno);
+ if (fd == -1)
+ remote_hostio_error (remote_errno);
+
+ file = fopen (local_file, "wb");
+ if (file == NULL)
+ perror_with_name (local_file);
+ back_to = make_cleanup (fclose_cleanup, file);
+
+ /* Send up to this many bytes at once. They won't all fit in the
+ remote packet limit, so we'll transfer slightly fewer. */
+ io_size = get_remote_packet_size ();
+ buffer = xmalloc (io_size);
+ make_cleanup (xfree, buffer);
+
+ close_cleanup = make_cleanup (remote_hostio_close_cleanup, &fd);
+
+ offset = 0;
+ while (1)
+ {
+ bytes = remote_hostio_pread (fd, buffer, io_size, offset, &remote_errno);
+ if (bytes == 0)
+ /* Success, but no bytes, means end-of-file. */
+ break;
+ if (bytes == -1)
+ remote_hostio_error (remote_errno);
+
+ offset += bytes;
+
+ bytes = fwrite (buffer, 1, bytes, file);
+ if (bytes == 0)
+ perror_with_name (local_file);
+ }
+
+ discard_cleanups (close_cleanup);
+ if (remote_hostio_close (fd, &remote_errno))
+ remote_hostio_error (remote_errno);
+
+ if (from_tty)
+ printf_filtered (_("Successfully fetched file \"%s\".\n"), remote_file);
+ do_cleanups (back_to);
+}
+
+void
+remote_file_delete (const char *remote_file, int from_tty)
+{
+ int retcode, remote_errno;
+
+ if (!remote_desc)
+ error (_("command can only be used with remote target"));
+
+ retcode = remote_hostio_unlink (remote_file, &remote_errno);
+ if (retcode == -1)
+ remote_hostio_error (remote_errno);
+
+ if (from_tty)
+ printf_filtered (_("Successfully deleted file \"%s\".\n"), remote_file);
+}
+
+static void
+remote_put_command (char *args, int from_tty)
+{
+ struct cleanup *back_to;
+ char **argv;
+
+ argv = buildargv (args);
+ if (argv == NULL)
+ nomem (0);
+ back_to = make_cleanup_freeargv (argv);
+ if (argv[0] == NULL || argv[1] == NULL || argv[2] != NULL)
+ error (_("Invalid parameters to remote put"));
+
+ remote_file_put (argv[0], argv[1], from_tty);
+
+ do_cleanups (back_to);
+}
+
+static void
+remote_get_command (char *args, int from_tty)
+{
+ struct cleanup *back_to;
+ char **argv;
+
+ argv = buildargv (args);
+ if (argv == NULL)
+ nomem (0);
+ back_to = make_cleanup_freeargv (argv);
+ if (argv[0] == NULL || argv[1] == NULL || argv[2] != NULL)
+ error (_("Invalid parameters to remote get"));
+
+ remote_file_get (argv[0], argv[1], from_tty);
+
+ do_cleanups (back_to);
+}
+
+static void
+remote_delete_command (char *args, int from_tty)
+{
+ struct cleanup *back_to;
+ char **argv;
+
+ argv = buildargv (args);
+ if (argv == NULL)
+ nomem (0);
+ back_to = make_cleanup_freeargv (argv);
+ if (argv[0] == NULL || argv[1] != NULL)
+ error (_("Invalid parameters to remote delete"));
+
+ remote_file_delete (argv[0], from_tty);
+
+ do_cleanups (back_to);
+}
+
+static void
+remote_command (char *args, int from_tty)
+{
+ help_list (remote_cmdlist, "remote ", -1, gdb_stdout);
+}
+
static void
init_remote_ops (void)
{
remote_ops.to_stop = remote_stop;
remote_ops.to_xfer_partial = remote_xfer_partial;
remote_ops.to_rcmd = remote_rcmd;
+ remote_ops.to_log_command = serial_log_command;
remote_ops.to_get_thread_local_address = remote_get_thread_local_address;
remote_ops.to_stratum = process_stratum;
remote_ops.to_has_all_memory = 1;
remote_ops.to_has_execution = 1;
remote_ops.to_has_thread_control = tc_schedlock; /* can lock scheduler */
remote_ops.to_magic = OPS_MAGIC;
+ remote_ops.to_memory_map = remote_memory_map;
+ remote_ops.to_flash_erase = remote_flash_erase;
+ remote_ops.to_flash_done = remote_flash_done;
+ remote_ops.to_read_description = remote_read_description;
}
/* Set up the extended remote vector by making a copy of the standard
will be able to delay notifying the client of an event until the
point where an entire packet has been received. */
-static void (*async_client_callback) (enum inferior_event_type event_type,
+static void (*async_client_callback) (enum inferior_event_type event_type,
void *context);
static void *async_client_context;
static serial_event_ftype remote_async_serial_handler;
}
static void
-remote_async (void (*callback) (enum inferior_event_type event_type,
+remote_async (void (*callback) (enum inferior_event_type event_type,
void *context), void *context)
{
if (current_target.to_async_mask_value == 0)
init_remote_async_ops (void)
{
remote_async_ops.to_shortname = "async";
- remote_async_ops.to_longname =
+ remote_async_ops.to_longname =
"Remote serial target in async version of the gdb-specific protocol";
remote_async_ops.to_doc =
"Use a remote computer via a serial line, using a gdb-specific protocol.\n\
remote_async_ops.to_async = remote_async;
remote_async_ops.to_async_mask_value = 1;
remote_async_ops.to_magic = OPS_MAGIC;
+ remote_async_ops.to_memory_map = remote_memory_map;
+ remote_async_ops.to_flash_erase = remote_flash_erase;
+ remote_async_ops.to_flash_done = remote_flash_done;
+ remote_async_ops.to_read_description = remote_read_description;
}
/* Set up the async extended remote vector by making a copy of the standard
static void
set_remote_cmd (char *args, int from_tty)
{
+ help_list (remote_set_cmdlist, "set remote ", -1, gdb_stdout);
}
static void
show_remote_cmd (char *args, int from_tty)
{
/* We can't just use cmd_show_list here, because we want to skip
- the redundant "show remote Z-packet". */
+ the redundant "show remote Z-packet" and the legacy aliases. */
struct cleanup *showlist_chain;
struct cmd_list_element *list = remote_show_cmdlist;
for (; list != NULL; list = list->next)
if (strcmp (list->name, "Z-packet") == 0)
continue;
- else if (list->type == show_cmd)
+ else if (list->type == not_set_cmd)
+ /* Alias commands are exactly like the original, except they
+ don't have the normal type. */
+ continue;
+ else
{
struct cleanup *option_chain
= make_cleanup_ui_out_tuple_begin_end (uiout, "option");
ui_out_field_string (uiout, "name", list->name);
ui_out_text (uiout, ": ");
- do_setshow_command ((char *) NULL, from_tty, list);
+ if (list->type == show_cmd)
+ do_setshow_command ((char *) NULL, from_tty, list);
+ else
+ cmd_func (list, NULL, from_tty);
/* Close the tuple. */
do_cleanups (option_chain);
}
-}
-static void
-build_remote_gdbarch_data (void)
-{
- remote_address_size = TARGET_ADDR_BIT;
+ /* Close the tuple. */
+ do_cleanups (showlist_chain);
}
-/* Saved pointer to previous owner of the new_objfile event. */
-static void (*remote_new_objfile_chain) (struct objfile *);
/* Function to be called whenever a new objfile (shlib) is detected. */
static void
remote_new_objfile (struct objfile *objfile)
{
if (remote_desc != 0) /* Have a remote connection. */
- {
- remote_check_symbols (objfile);
- }
- /* Call predecessor on chain, if any. */
- if (remote_new_objfile_chain != 0 &&
- remote_desc == 0)
- remote_new_objfile_chain (objfile);
+ remote_check_symbols (objfile);
}
void
struct remote_state *rs;
/* architecture specific data */
- remote_gdbarch_data_handle =
+ remote_gdbarch_data_handle =
gdbarch_data_register_post_init (init_remote_state);
-
- /* Old tacky stuff. NOTE: This comes after the remote protocol so
- that the remote protocol has been initialized. */
- DEPRECATED_REGISTER_GDBARCH_SWAP (remote_address_size);
- deprecated_register_gdbarch_swap (NULL, 0, build_remote_gdbarch_data);
+ remote_g_packet_data_handle =
+ gdbarch_data_register_pre_init (remote_g_packet_data_init);
/* Initialize the per-target state. At the moment there is only one
of these, not one per target. Only one target is active at a
time. The default buffer size is unimportant; it will be expanded
whenever a larger buffer is needed. */
- rs = get_remote_state ();
+ rs = get_remote_state_raw ();
rs->buf_size = 400;
rs->buf = xmalloc (rs->buf_size);
add_target (&extended_async_remote_ops);
/* Hook into new objfile notification. */
- remote_new_objfile_chain = deprecated_target_new_objfile_hook;
- deprecated_target_new_objfile_hook = remote_new_objfile;
+ observer_attach_new_objfile (remote_new_objfile);
#if 0
init_remote_threadtests ();
add_packet_config_cmd (&remote_protocol_packets[PACKET_vCont],
"vCont", "verbose-resume", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_QPassSignals],
+ "QPassSignals", "pass-signals", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qSymbol],
"qSymbol", "symbol-lookup", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_auxv],
"qXfer:auxv:read", "read-aux-vector", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_features],
+ "qXfer:features:read", "target-features", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_libraries],
+ "qXfer:libraries:read", "library-info", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_memory_map],
+ "qXfer:memory-map:read", "memory-map", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_spu_read],
+ "qXfer:spu:read", "read-spu-object", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_spu_write],
+ "qXfer:spu:write", "write-spu-object", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qGetTLSAddr],
"qGetTLSAddr", "get-thread-local-storage-address",
0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_qSupported],
"qSupported", "supported-packets", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vFile_open],
+ "vFile:open", "hostio-open", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vFile_pread],
+ "vFile:pread", "hostio-pread", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vFile_pwrite],
+ "vFile:pwrite", "hostio-pwrite", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vFile_close],
+ "vFile:close", "hostio-close", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_vFile_unlink],
+ "vFile:unlink", "hostio-unlink", 0);
+
/* Keep the old ``set remote Z-packet ...'' working. Each individual
Z sub-packet has its own set and show commands, but users may
have sets to this variable in their .gdbinit files (or in their
show_remote_protocol_Z_packet_cmd, /* FIXME: i18n: Use of remote protocol `Z' packets is %s. */
&remote_set_cmdlist, &remote_show_cmdlist);
+ add_prefix_cmd ("remote", class_files, remote_command, _("\
+Manipulate files on the remote system\n\
+Transfer files to and from the remote target system."),
+ &remote_cmdlist, "remote ",
+ 0 /* allow-unknown */, &cmdlist);
+
+ add_cmd ("put", class_files, remote_put_command,
+ _("Copy a local file to the remote system."),
+ &remote_cmdlist);
+
+ add_cmd ("get", class_files, remote_get_command,
+ _("Copy a remote file to the local system."),
+ &remote_cmdlist);
+
+ add_cmd ("delete", class_files, remote_delete_command,
+ _("Delete a remote file."),
+ &remote_cmdlist);
+
/* Eventually initialize fileio. See fileio.c */
initialize_remote_fileio (remote_set_cmdlist, remote_show_cmdlist);
}