/* Remote target communications for serial-line targets in custom GDB protocol
Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
- 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
- Free Software Foundation, Inc.
+ 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+ 2010 Free Software Foundation, Inc.
This file is part of GDB.
#include "remote-fileio.h"
#include "gdb/fileio.h"
#include "gdb_stat.h"
+#include "xml-support.h"
#include "memory-map.h"
+#include "tracepoint.h"
+#include "ax.h"
+#include "ax-gdb.h"
+
+/* temp hacks for tracepoint encoding migration */
+static char *target_buf;
+static long target_buf_size;
+/*static*/ void
+encode_actions (struct breakpoint *t, char ***tdp_actions,
+ char ***stepping_actions);
+
/* The size to align memory write packets, when practical. The protocol
does not guarantee any alignment, and gdb will generate short
writes and unaligned writes, but even as a best-effort attempt this
static int readchar (int timeout);
-static void remote_kill (void);
+static void remote_kill (struct target_ops *ops);
static int tohex (int nib);
static int fromhex (int a);
-static int hex2bin (const char *hex, gdb_byte *bin, int count);
+extern int hex2bin (const char *hex, gdb_byte *bin, int count);
-static int bin2hex (const gdb_byte *bin, char *hex, int count);
+extern int bin2hex (const gdb_byte *bin, char *hex, int count);
static int putpkt_binary (char *buf, int cnt);
static char *write_ptid (char *buf, const char *endbuf, ptid_t ptid);
static ptid_t read_ptid (char *buf, char **obuf);
+struct remote_state;
+static int remote_get_trace_status (struct trace_status *ts);
+
+static int remote_upload_tracepoints (struct uploaded_tp **utpp);
+
+static int remote_upload_trace_state_variables (struct uploaded_tsv **utsvp);
+
static void remote_query_supported (void);
static void remote_check_symbols (struct objfile *objfile);
/* True if the stub reports support for vCont;t. */
int support_vCont_t;
+
+ /* True if the stub reports support for conditional tracepoints. */
+ int cond_tracepoints;
+
+ /* True if the stub reports support for fast tracepoints. */
+ int fast_tracepoints;
+
+ /* True if the stub can continue running a trace while GDB is
+ disconnected. */
+ int disconnected_tracing;
+
+ /* Nonzero if the user has pressed Ctrl-C, but the target hasn't
+ responded to that. */
+ int ctrlc_pending_p;
+
+ /* GDBARCH associated with this target. */
+ struct gdbarch *gdbarch;
+};
+
+/* Private data that we'll store in (struct thread_info)->private. */
+struct private_thread_info
+{
+ char *extra;
+ int core;
};
+static void
+free_private_thread_info (struct private_thread_info *info)
+{
+ xfree (info->extra);
+ xfree (info);
+}
+
/* Returns true if the multi-process extensions are in effect. */
static int
remote_multi_process_p (struct remote_state *rs)
long remote_packet_size;
};
+long sizeof_pkt = 2000;
+
+/* Utility: generate error from an incoming stub packet. */
+static void
+trace_error (char *buf)
+{
+ if (*buf++ != 'E')
+ return; /* not an error msg */
+ switch (*buf)
+ {
+ case '1': /* malformed packet error */
+ if (*++buf == '0') /* general case: */
+ error (_("remote.c: error in outgoing packet."));
+ else
+ error (_("remote.c: error in outgoing packet at field #%ld."),
+ strtol (buf, NULL, 16));
+ case '2':
+ error (_("trace API error 0x%s."), ++buf);
+ default:
+ error (_("Target returns error code '%s'."), buf);
+ }
+}
+
+/* Utility: wait for reply from stub, while accepting "O" packets. */
+static char *
+remote_get_noisy_reply (char **buf_p,
+ long *sizeof_buf)
+{
+ do /* Loop on reply from remote stub. */
+ {
+ char *buf;
+ QUIT; /* allow user to bail out with ^C */
+ getpkt (buf_p, sizeof_buf, 0);
+ buf = *buf_p;
+ if (buf[0] == 0)
+ error (_("Target does not support this command."));
+ else if (buf[0] == 'E')
+ trace_error (buf);
+ else if (buf[0] == 'O' &&
+ buf[1] != 'K')
+ remote_console_output (buf + 1); /* 'O' message from stub */
+ else
+ return buf; /* here's the actual reply */
+ }
+ while (1);
+}
/* Handle for retreving the remote protocol data from gdbarch. */
static struct gdbarch_data *remote_gdbarch_data_handle;
rs->buf = xrealloc (rs->buf, rs->buf_size);
}
+ /* Record our GDBARCH. */
+ rs->gdbarch = gdbarch;
+
return rsa;
}
this can go away. */
static int wait_forever_enabled_p = 1;
+/* Allow the user to specify what sequence to send to the remote
+ when he requests a program interruption: Although ^C is usually
+ what remote systems expect (this is the default, here), it is
+ sometimes preferable to send a break. On other systems such
+ as the Linux kernel, a break followed by g, which is Magic SysRq g
+ is required in order to interrupt the execution. */
+const char interrupt_sequence_control_c[] = "Ctrl-C";
+const char interrupt_sequence_break[] = "BREAK";
+const char interrupt_sequence_break_g[] = "BREAK-g";
+static const char *interrupt_sequence_modes[] =
+ {
+ interrupt_sequence_control_c,
+ interrupt_sequence_break,
+ interrupt_sequence_break_g,
+ NULL
+ };
+static const char *interrupt_sequence_mode = interrupt_sequence_control_c;
+
+static void
+show_interrupt_sequence (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+ if (interrupt_sequence_mode == interrupt_sequence_control_c)
+ fprintf_filtered (file,
+ _("Send the ASCII ETX character (Ctrl-c) "
+ "to the remote target to interrupt the "
+ "execution of the program.\n"));
+ else if (interrupt_sequence_mode == interrupt_sequence_break)
+ fprintf_filtered (file,
+ _("send a break signal to the remote target "
+ "to interrupt the execution of the program.\n"));
+ else if (interrupt_sequence_mode == interrupt_sequence_break_g)
+ fprintf_filtered (file,
+ _("Send a break signal and 'g' a.k.a. Magic SysRq g to "
+ "the remote target to interrupt the execution "
+ "of Linux kernel.\n"));
+ else
+ internal_error (__FILE__, __LINE__,
+ _("Invalid value for interrupt_sequence_mode: %s."),
+ interrupt_sequence_mode);
+}
-/* This variable chooses whether to send a ^C or a break when the user
- requests program interruption. Although ^C is usually what remote
- systems expect, and that is the default here, sometimes a break is
- preferable instead. */
+/* This boolean variable specifies whether interrupt_sequence is sent
+ to the remote target when gdb connects to it.
+ This is mostly needed when you debug the Linux kernel: The Linux kernel
+ expects BREAK g which is Magic SysRq g for connecting gdb. */
+static int interrupt_on_connect = 0;
+/* This variable is used to implement the "set/show remotebreak" commands.
+ Since these commands are now deprecated in favor of "set/show remote
+ interrupt-sequence", it no longer has any effect on the code. */
static int remote_break;
+static void
+set_remotebreak (char *args, int from_tty, struct cmd_list_element *c)
+{
+ if (remote_break)
+ interrupt_sequence_mode = interrupt_sequence_break;
+ else
+ interrupt_sequence_mode = interrupt_sequence_control_c;
+}
+
+static void
+show_remotebreak (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+}
+
/* Descriptor for I/O to remote machine. Initialize it to NULL so that
remote_open knows that we don't have a file open when the program
starts. */
set_remote_protocol_packet_cmd,
show_remote_protocol_packet_cmd,
&remote_set_cmdlist, &remote_show_cmdlist);
+ /* The command code copies the documentation strings. */
+ xfree (set_doc);
+ xfree (show_doc);
/* set/show remote NAME-packet {auto,on,off} -- legacy. */
if (legacy)
{
PACKET_qXfer_spu_read,
PACKET_qXfer_spu_write,
PACKET_qXfer_osdata,
+ PACKET_qXfer_threads,
PACKET_qGetTLSAddr,
PACKET_qSupported,
PACKET_QPassSignals,
PACKET_vKill,
PACKET_qXfer_siginfo_read,
PACKET_qXfer_siginfo_write,
+ PACKET_qAttached,
+ PACKET_ConditionalTracepoints,
+ PACKET_FastTracepoints,
+ PACKET_bc,
+ PACKET_bs,
PACKET_MAX
};
static ptid_t general_thread;
static ptid_t continue_thread;
+/* Find out if the stub attached to PID (and hence GDB should offer to
+ detach instead of killing it when bailing out). */
+
+static int
+remote_query_attached (int pid)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ if (remote_protocol_packets[PACKET_qAttached].support == PACKET_DISABLE)
+ return 0;
+
+ if (remote_multi_process_p (rs))
+ sprintf (rs->buf, "qAttached:%x", pid);
+ else
+ sprintf (rs->buf, "qAttached");
+
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ switch (packet_ok (rs->buf,
+ &remote_protocol_packets[PACKET_qAttached]))
+ {
+ case PACKET_OK:
+ if (strcmp (rs->buf, "1") == 0)
+ return 1;
+ break;
+ case PACKET_ERROR:
+ warning (_("Remote failure reply: %s"), rs->buf);
+ break;
+ case PACKET_UNKNOWN:
+ break;
+ }
+
+ return 0;
+}
+
/* Add PID to GDB's inferior table. Since we can be connected to a
remote system before before knowing about any inferior, mark the
- target with execution when we find the first inferior. */
+ target with execution when we find the first inferior. If ATTACHED
+ is 1, then we had just attached to this inferior. If it is 0, then
+ we just created this inferior. If it is -1, then try querying the
+ remote stub to find out if it had attached to the inferior or
+ not. */
static struct inferior *
-remote_add_inferior (int pid)
+remote_add_inferior (int pid, int attached)
{
- struct remote_state *rs = get_remote_state ();
struct inferior *inf;
- inf = add_inferior (pid);
+ /* Check whether this process we're learning about is to be
+ considered attached, or if is to be considered to have been
+ spawned by the stub. */
+ if (attached == -1)
+ attached = remote_query_attached (pid);
- /* This may be the first inferior we hear about. */
- if (!target_has_execution)
+ if (gdbarch_has_global_solist (target_gdbarch))
{
- if (rs->extended)
- target_mark_running (&extended_remote_ops);
- else
- target_mark_running (&remote_ops);
+ /* If the target shares code across all inferiors, then every
+ attach adds a new inferior. */
+ inf = add_inferior (pid);
+
+ /* ... and every inferior is bound to the same program space.
+ However, each inferior may still have its own address
+ space. */
+ inf->aspace = maybe_new_address_space ();
+ inf->pspace = current_program_space;
+ }
+ else
+ {
+ /* In the traditional debugging scenario, there's a 1-1 match
+ between program/address spaces. We simply bind the inferior
+ to the program space's address space. */
+ inf = current_inferior ();
+ inferior_appeared (inf, pid);
}
+ inf->attach_flag = attached;
+
return inf;
}
static void
remote_notice_new_inferior (ptid_t currthread, int running)
{
- struct remote_state *rs = get_remote_state ();
-
/* If this is a new thread, add it to GDB's thread list.
If we leave it up to WFI to do this, bad things will happen. */
if (!in_thread_list (currthread))
{
struct inferior *inf = NULL;
+ int pid = ptid_get_pid (currthread);
- if (ptid_equal (pid_to_ptid (ptid_get_pid (currthread)), inferior_ptid))
+ if (ptid_is_pid (inferior_ptid)
+ && pid == ptid_get_pid (inferior_ptid))
{
/* inferior_ptid has no thread member yet. This can happen
with the vAttach -> remote_wait,"TAAthread:" path if the
stub doesn't support qC. This is the first stop reported
after an attach, so this is the main thread. Update the
ptid in the thread list. */
- thread_change_ptid (inferior_ptid, currthread);
- return;
+ if (in_thread_list (pid_to_ptid (pid)))
+ thread_change_ptid (inferior_ptid, currthread);
+ else
+ {
+ remote_add_thread (currthread, running);
+ inferior_ptid = currthread;
+ }
+ return;
}
if (ptid_equal (magic_null_ptid, inferior_ptid))
doesn't support qC. This is the first stop reported
after an attach, so this is the main thread. Update the
ptid in the thread list. */
- thread_change_ptid (inferior_ptid, currthread);
+ thread_change_ptid (inferior_ptid, currthread);
return;
}
may not know about it yet. Add it before adding its child
thread, so notifications are emitted in a sensible order. */
if (!in_inferior_list (ptid_get_pid (currthread)))
- inf = remote_add_inferior (ptid_get_pid (currthread));
+ inf = remote_add_inferior (ptid_get_pid (currthread), -1);
/* This is really a new thread. Add it. */
remote_add_thread (currthread, running);
}
}
+/* Return the private thread data, creating it if necessary. */
+
+struct private_thread_info *
+demand_private_info (ptid_t ptid)
+{
+ struct thread_info *info = find_thread_ptid (ptid);
+
+ gdb_assert (info);
+
+ if (!info->private)
+ {
+ info->private = xmalloc (sizeof (*(info->private)));
+ info->private_dtor = free_private_thread_info;
+ info->private->core = -1;
+ info->private->extra = 0;
+ }
+
+ return info->private;
+}
+
/* Call this function as a result of
1) A halt indication (T packet) containing a thread id
2) A direct query of currthread
record_currthread (ptid_t currthread)
{
general_thread = currthread;
-
- if (ptid_equal (currthread, minus_one_ptid))
- /* We're just invalidating the local thread mirror. */
- return;
-
- remote_notice_new_inferior (currthread, 0);
}
static char *last_pass_packet;
remote_thread_alive (struct target_ops *ops, ptid_t ptid)
{
struct remote_state *rs = get_remote_state ();
- int tid = ptid_get_tid (ptid);
char *p, *endp;
if (ptid_equal (ptid, magic_null_ptid))
char *p = buf;
char *pp;
ULONGEST pid = 0, tid = 0;
- ptid_t ptid;
if (*p == 'p')
{
remote_current_thread (ptid_t oldpid)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- int tid;
- int pid;
putpkt ("qC");
getpkt (&rs->buf, &rs->buf_size, 0);
CRAZY_MAX_THREADS);
}
+#if defined(HAVE_LIBEXPAT)
+
+typedef struct thread_item
+{
+ ptid_t ptid;
+ char *extra;
+ int core;
+} thread_item_t;
+DEF_VEC_O(thread_item_t);
+
+struct threads_parsing_context
+{
+ VEC (thread_item_t) *items;
+};
+
+static void
+start_thread (struct gdb_xml_parser *parser,
+ const struct gdb_xml_element *element,
+ void *user_data, VEC(gdb_xml_value_s) *attributes)
+{
+ struct threads_parsing_context *data = user_data;
+
+ struct thread_item item;
+ char *id;
+
+ id = VEC_index (gdb_xml_value_s, attributes, 0)->value;
+ item.ptid = read_ptid (id, NULL);
+
+ if (VEC_length (gdb_xml_value_s, attributes) > 1)
+ item.core = *(ULONGEST *) VEC_index (gdb_xml_value_s, attributes, 1)->value;
+ else
+ item.core = -1;
+
+ item.extra = 0;
+
+ VEC_safe_push (thread_item_t, data->items, &item);
+}
+
+static void
+end_thread (struct gdb_xml_parser *parser,
+ const struct gdb_xml_element *element,
+ void *user_data, const char *body_text)
+{
+ struct threads_parsing_context *data = user_data;
+
+ if (body_text && *body_text)
+ VEC_last (thread_item_t, data->items)->extra = strdup (body_text);
+}
+
+const struct gdb_xml_attribute thread_attributes[] = {
+ { "id", GDB_XML_AF_NONE, NULL, NULL },
+ { "core", GDB_XML_AF_OPTIONAL, gdb_xml_parse_attr_ulongest, NULL },
+ { NULL, GDB_XML_AF_NONE, NULL, NULL }
+};
+
+const struct gdb_xml_element thread_children[] = {
+ { NULL, NULL, NULL, GDB_XML_EF_NONE, NULL, NULL }
+};
+
+const struct gdb_xml_element threads_children[] = {
+ { "thread", thread_attributes, thread_children,
+ GDB_XML_EF_REPEATABLE | GDB_XML_EF_OPTIONAL,
+ start_thread, end_thread },
+ { NULL, NULL, NULL, GDB_XML_EF_NONE, NULL, NULL }
+};
+
+const struct gdb_xml_element threads_elements[] = {
+ { "threads", NULL, threads_children,
+ GDB_XML_EF_NONE, NULL, NULL },
+ { NULL, NULL, NULL, GDB_XML_EF_NONE, NULL, NULL }
+};
+
+#endif
+
/*
* Find all threads for info threads command.
* Uses new thread protocol contributed by Cisco.
if (remote_desc == 0) /* paranoia */
error (_("Command can only be used when connected to the remote target."));
+#if defined(HAVE_LIBEXPAT)
+ if (remote_protocol_packets[PACKET_qXfer_threads].support == PACKET_ENABLE)
+ {
+ char *xml = target_read_stralloc (¤t_target,
+ TARGET_OBJECT_THREADS, NULL);
+
+ struct cleanup *back_to = make_cleanup (xfree, xml);
+ if (xml && *xml)
+ {
+ struct gdb_xml_parser *parser;
+ struct threads_parsing_context context;
+ struct cleanup *back_to = make_cleanup (null_cleanup, NULL);
+
+ context.items = 0;
+ parser = gdb_xml_create_parser_and_cleanup (_("threads"),
+ threads_elements,
+ &context);
+
+ gdb_xml_use_dtd (parser, "threads.dtd");
+
+ if (gdb_xml_parse (parser, xml) == 0)
+ {
+ int i;
+ struct thread_item *item;
+
+ for (i = 0; VEC_iterate (thread_item_t, context.items, i, item); ++i)
+ {
+ if (!ptid_equal (item->ptid, null_ptid))
+ {
+ struct private_thread_info *info;
+ /* In non-stop mode, we assume new found threads
+ are running until proven otherwise with a
+ stop reply. In all-stop, we can only get
+ here if all threads are stopped. */
+ int running = non_stop ? 1 : 0;
+
+ remote_notice_new_inferior (item->ptid, running);
+
+ info = demand_private_info (item->ptid);
+ info->core = item->core;
+ info->extra = item->extra;
+ item->extra = 0;
+ }
+ xfree (item->extra);
+ }
+ }
+
+ VEC_free (thread_item_t, context.items);
+ }
+
+ do_cleanups (back_to);
+ return;
+ }
+#endif
+
if (use_threadinfo_query)
{
putpkt ("qfThreadInfo");
server doesn't know about it. */
return NULL;
+ if (remote_protocol_packets[PACKET_qXfer_threads].support == PACKET_ENABLE)
+ {
+ struct thread_info *info = find_thread_ptid (tp->ptid);
+ if (info && info->private)
+ return info->private->extra;
+ else
+ return NULL;
+ }
+
if (use_threadextra_query)
{
char *b = rs->buf;
delete_async_event_handler (&remote_async_inferior_event_token);
if (remote_async_get_pending_events_token)
delete_async_event_handler (&remote_async_get_pending_events_token);
-
- generic_mourn_inferior ();
}
/* Query the remote side for the text, data and bss offsets. */
int extended_p;
};
+/* Send interrupt_sequence to remote target. */
+static void
+send_interrupt_sequence ()
+{
+ if (interrupt_sequence_mode == interrupt_sequence_control_c)
+ serial_write (remote_desc, "\x03", 1);
+ else if (interrupt_sequence_mode == interrupt_sequence_break)
+ serial_send_break (remote_desc);
+ else if (interrupt_sequence_mode == interrupt_sequence_break_g)
+ {
+ serial_send_break (remote_desc);
+ serial_write (remote_desc, "g", 1);
+ }
+ else
+ internal_error (__FILE__, __LINE__,
+ _("Invalid value for interrupt_sequence_mode: %s."),
+ interrupt_sequence_mode);
+}
+
static void
remote_start_remote (struct ui_out *uiout, void *opaque)
{
/* Ack any packet which the remote side has already sent. */
serial_write (remote_desc, "+", 1);
+ if (interrupt_on_connect)
+ send_interrupt_sequence ();
+
/* The first packet we send to the target is the optional "supported
packets" request. If the target can answer this, it will tell us
which later probes to skip. */
this before anything involving memory or registers. */
target_find_description ();
+ /* Next, now that we know something about the target, update the
+ address spaces in the program spaces. */
+ update_address_spaces ();
+
/* On OSs where the list of libraries is global to all
processes, we fetch them early. */
if (gdbarch_has_global_solist (target_gdbarch))
{
if (rs->buf[0] == 'W' || rs->buf[0] == 'X')
{
- if (args->extended_p)
- {
- /* We're connected, but not running. Drop out before we
- call start_remote. */
- target_mark_exited (args->target);
- return;
- }
- else
+ if (!args->extended_p)
error (_("The target is not running (try extended-remote?)"));
+
+ /* We're connected, but not running. Drop out before we
+ call start_remote. */
+ return;
}
else
{
/* Now, if we have thread information, update inferior_ptid. */
inferior_ptid = remote_current_thread (inferior_ptid);
- remote_add_inferior (ptid_get_pid (inferior_ptid));
+ remote_add_inferior (ptid_get_pid (inferior_ptid), -1);
/* Always add the main thread. */
add_thread_silent (inferior_ptid);
}
else
{
+ /* Clear WFI global state. Do this before finding about new
+ threads and inferiors, and setting the current inferior.
+ Otherwise we would clear the proceed status of the current
+ inferior when we want its stop_soon state to be preserved
+ (see notice_new_inferior). */
+ init_wait_for_inferior ();
+
/* In non-stop, we will either get an "OK", meaning that there
are no stopped threads at this time; or, a regular stop
reply. In the latter case, there may be more than one thread
if (thread_count () == 0)
{
- if (args->extended_p)
- {
- /* We're connected, but not running. Drop out before we
- call start_remote. */
- target_mark_exited (args->target);
- return;
- }
- else
+ if (!args->extended_p)
error (_("The target is not running (try extended-remote?)"));
- }
- if (args->extended_p)
- target_mark_running (args->target);
+ /* We're connected, but not running. Drop out before we
+ call start_remote. */
+ return;
+ }
/* Let the stub know that we want it to return the thread. */
remote_check_symbols (symfile_objfile);
}
- /* If code is shared between processes, then breakpoints are global
- too; Insert them now. */
- if (gdbarch_has_global_solist (target_gdbarch)
+ /* Possibly the target has been engaged in a trace run started
+ previously; find out where things are at. */
+ if (rs->disconnected_tracing)
+ {
+ struct uploaded_tp *uploaded_tps = NULL;
+ struct uploaded_tsv *uploaded_tsvs = NULL;
+
+ remote_get_trace_status (current_trace_status ());
+ if (current_trace_status ()->running)
+ printf_filtered (_("Trace is already running on the target.\n"));
+
+ /* Get trace state variables first, they may be checked when
+ parsing uploaded commands. */
+
+ remote_upload_trace_state_variables (&uploaded_tsvs);
+
+ merge_uploaded_trace_state_variables (&uploaded_tsvs);
+
+ remote_upload_tracepoints (&uploaded_tps);
+
+ merge_uploaded_tracepoints (&uploaded_tps);
+ }
+
+ /* If breakpoints are global, insert them now. */
+ if (gdbarch_has_global_breakpoints (target_gdbarch)
&& breakpoints_always_inserted_mode ())
insert_breakpoints ();
}
xsnprintf (msg, get_remote_packet_size (), "qSymbol::%s", &reply[8]);
else
{
+ int addr_size = gdbarch_addr_bit (target_gdbarch) / 8;
CORE_ADDR sym_addr = SYMBOL_VALUE_ADDRESS (sym);
/* If this is a function address, return the start of code
¤t_target);
xsnprintf (msg, get_remote_packet_size (), "qSymbol:%s:%s",
- paddr_nz (sym_addr), &reply[8]);
+ phex_nz (sym_addr, addr_size), &reply[8]);
}
putpkt (msg);
rs->non_stop_aware = (support == PACKET_ENABLE);
}
+static void
+remote_cond_tracepoint_feature (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+ rs->cond_tracepoints = (support == PACKET_ENABLE);
+}
+
+static void
+remote_fast_tracepoint_feature (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+ rs->fast_tracepoints = (support == PACKET_ENABLE);
+}
+
+static void
+remote_disconnected_tracing_feature (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+ rs->disconnected_tracing = (support == PACKET_ENABLE);
+}
+
static struct protocol_feature remote_protocol_features[] = {
{ "PacketSize", PACKET_DISABLE, remote_packet_size, -1 },
{ "qXfer:auxv:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_spu_write },
{ "qXfer:osdata:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_osdata },
+ { "qXfer:threads:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_threads },
{ "QPassSignals", PACKET_DISABLE, remote_supported_packet,
PACKET_QPassSignals },
{ "QStartNoAckMode", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_siginfo_read },
{ "qXfer:siginfo:write", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_siginfo_write },
+ { "ConditionalTracepoints", PACKET_DISABLE, remote_cond_tracepoint_feature,
+ PACKET_ConditionalTracepoints },
+ { "FastTracepoints", PACKET_DISABLE, remote_fast_tracepoint_feature,
+ PACKET_FastTracepoints },
+ { "DisconnectedTracing", PACKET_DISABLE, remote_disconnected_tracing_feature,
+ -1 },
+ { "ReverseContinue", PACKET_DISABLE, remote_supported_packet,
+ PACKET_bc },
+ { "ReverseStep", PACKET_DISABLE, remote_supported_packet,
+ PACKET_bs },
};
static void
rs->buf[0] = 0;
if (remote_protocol_packets[PACKET_qSupported].support != PACKET_DISABLE)
{
- if (rs->extended)
- putpkt ("qSupported:multiprocess+");
+ const char *qsupported = gdbarch_qsupported (rs->gdbarch);
+ if (qsupported)
+ {
+ char *q;
+ if (rs->extended)
+ q = concat ("qSupported:multiprocess+;", qsupported, NULL);
+ else
+ q = concat ("qSupported:", qsupported, NULL);
+ putpkt (q);
+ xfree (q);
+ }
else
- putpkt ("qSupported");
+ {
+ if (rs->extended)
+ putpkt ("qSupported:multiprocess+");
+ else
+ putpkt ("qSupported");
+ }
getpkt (&rs->buf, &rs->buf_size, 0);
But if we're connected to a target system with no running process,
then we will still be connected when it returns. Ask this question
first, before target_preopen has a chance to kill anything. */
- if (remote_desc != NULL && !target_has_execution)
+ if (remote_desc != NULL && !have_inferiors ())
{
if (!from_tty
|| query (_("Already connected to a remote target. Disconnect? ")))
process, we may still be connected. If we are starting "target
remote" now, the extended-remote target will not have been
removed by unpush_target. */
- if (remote_desc != NULL && !target_has_execution)
+ if (remote_desc != NULL && !have_inferiors ())
pop_target ();
/* Make sure we send the passed signals list the next time we resume. */
}
push_target (target); /* Switch to using remote target now. */
- /* Assume that the target is not running, until we learn otherwise. */
- if (extended_p)
- target_mark_exited (target);
-
/* Register extra event sources in the event loop. */
remote_async_inferior_event_token
= create_async_event_handler (remote_async_inferior_event_handler,
rs->extended = extended_p;
rs->non_stop_aware = 0;
rs->waiting_for_stop_reply = 0;
+ rs->ctrlc_pending_p = 0;
general_thread = not_sent_ptid;
continue_thread = not_sent_ptid;
int pid;
char *dummy;
char *wait_status = NULL;
- struct inferior *inf;
if (!args)
error_no_arg (_("process-id to attach"));
error (_("Attaching to %s failed"),
target_pid_to_str (pid_to_ptid (pid)));
+ set_current_inferior (remote_add_inferior (pid, 1));
+
inferior_ptid = pid_to_ptid (pid);
- /* Now, if we have thread information, update inferior_ptid. */
- inferior_ptid = remote_current_thread (inferior_ptid);
+ if (non_stop)
+ {
+ struct thread_info *thread;
- inf = remote_add_inferior (pid);
- inf->attach_flag = 1;
+ /* Get list of threads. */
+ remote_threads_info (target);
- if (non_stop)
- /* Get list of threads. */
- remote_threads_info (target);
+ thread = first_thread_of_process (pid);
+ if (thread)
+ inferior_ptid = thread->ptid;
+ else
+ inferior_ptid = pid_to_ptid (pid);
+
+ /* Invalidate our notion of the remote current thread. */
+ record_currthread (minus_one_ptid);
+ }
else
- /* Add the main thread to the thread list. */
- add_thread_silent (inferior_ptid);
+ {
+ /* Now, if we have thread information, update inferior_ptid. */
+ inferior_ptid = remote_current_thread (inferior_ptid);
+
+ /* Add the main thread to the thread list. */
+ add_thread_silent (inferior_ptid);
+ }
/* Next, if the target can specify a description, read it. We do
this before anything involving memory or registers. */
error (_("Reply contains invalid hex digit %d"), a);
}
-static int
+int
hex2bin (const char *hex, gdb_byte *bin, int count)
{
int i;
return 'a' + nib - 10;
}
-static int
+int
bin2hex (const gdb_byte *bin, char *hex, int count)
{
int i;
packet_ok (buf, &remote_protocol_packets[PACKET_vCont]);
}
+/* Helper function for building "vCont" resumptions. Write a
+ resumption to P. ENDP points to one-passed-the-end of the buffer
+ we're allowed to write to. Returns BUF+CHARACTERS_WRITTEN. The
+ thread to be resumed is PTID; STEP and SIGGNAL indicate whether the
+ resumed thread should be single-stepped and/or signalled. If PTID
+ equals minus_one_ptid, then all threads are resumed; if PTID
+ represents a process, then all threads of the process are resumed;
+ the thread to be stepped and/or signalled is given in the global
+ INFERIOR_PTID. */
+
+static char *
+append_resumption (char *p, char *endp,
+ ptid_t ptid, int step, enum target_signal siggnal)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ if (step && siggnal != TARGET_SIGNAL_0)
+ p += xsnprintf (p, endp - p, ";S%02x", siggnal);
+ else if (step)
+ p += xsnprintf (p, endp - p, ";s");
+ else if (siggnal != TARGET_SIGNAL_0)
+ p += xsnprintf (p, endp - p, ";C%02x", siggnal);
+ else
+ p += xsnprintf (p, endp - p, ";c");
+
+ if (remote_multi_process_p (rs) && ptid_is_pid (ptid))
+ {
+ ptid_t nptid;
+
+ /* All (-1) threads of process. */
+ nptid = ptid_build (ptid_get_pid (ptid), 0, -1);
+
+ p += xsnprintf (p, endp - p, ":");
+ p = write_ptid (p, endp, nptid);
+ }
+ else if (!ptid_equal (ptid, minus_one_ptid))
+ {
+ p += xsnprintf (p, endp - p, ":");
+ p = write_ptid (p, endp, ptid);
+ }
+
+ return p;
+}
+
/* Resume the remote inferior by using a "vCont" packet. The thread
to be resumed is PTID; STEP and SIGGNAL indicate whether the
resumed thread should be single-stepped and/or signalled. If PTID
about overflowing BUF. Should there be a generic
"multi-part-packet" packet? */
+ p += xsnprintf (p, endp - p, "vCont");
+
if (ptid_equal (ptid, magic_null_ptid))
{
/* MAGIC_NULL_PTID means that we don't have any active threads,
so we don't have any TID numbers the inferior will
understand. Make sure to only send forms that do not specify
a TID. */
- if (step && siggnal != TARGET_SIGNAL_0)
- xsnprintf (p, endp - p, "vCont;S%02x", siggnal);
- else if (step)
- xsnprintf (p, endp - p, "vCont;s");
- else if (siggnal != TARGET_SIGNAL_0)
- xsnprintf (p, endp - p, "vCont;C%02x", siggnal);
- else
- xsnprintf (p, endp - p, "vCont;c");
+ p = append_resumption (p, endp, minus_one_ptid, step, siggnal);
}
- else if (ptid_equal (ptid, minus_one_ptid))
+ else if (ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid))
{
- /* Resume all threads, with preference for INFERIOR_PTID. */
- if (step && siggnal != TARGET_SIGNAL_0)
- {
- /* Step inferior_ptid with signal. */
- p += xsnprintf (p, endp - p, "vCont;S%02x:", siggnal);
- p = write_ptid (p, endp, inferior_ptid);
- /* And continue others. */
- p += xsnprintf (p, endp - p, ";c");
- }
- else if (step)
+ /* Resume all threads (of all processes, or of a single
+ process), with preference for INFERIOR_PTID. This assumes
+ inferior_ptid belongs to the set of all threads we are about
+ to resume. */
+ if (step || siggnal != TARGET_SIGNAL_0)
{
- /* Step inferior_ptid. */
- p += xsnprintf (p, endp - p, "vCont;s:");
- p = write_ptid (p, endp, inferior_ptid);
- /* And continue others. */
- p += xsnprintf (p, endp - p, ";c");
+ /* Step inferior_ptid, with or without signal. */
+ p = append_resumption (p, endp, inferior_ptid, step, siggnal);
}
- else if (siggnal != TARGET_SIGNAL_0)
- {
- /* Continue inferior_ptid with signal. */
- p += xsnprintf (p, endp - p, "vCont;C%02x:", siggnal);
- p = write_ptid (p, endp, inferior_ptid);
- /* And continue others. */
- p += xsnprintf (p, endp - p, ";c");
- }
- else
- xsnprintf (p, endp - p, "vCont;c");
+
+ /* And continue others without a signal. */
+ p = append_resumption (p, endp, ptid, /*step=*/ 0, TARGET_SIGNAL_0);
}
else
{
/* Scheduler locking; resume only PTID. */
- if (step && siggnal != TARGET_SIGNAL_0)
- {
- /* Step ptid with signal. */
- p += xsnprintf (p, endp - p, "vCont;S%02x:", siggnal);
- p = write_ptid (p, endp, ptid);
- }
- else if (step)
- {
- /* Step ptid. */
- p += xsnprintf (p, endp - p, "vCont;s:");
- p = write_ptid (p, endp, ptid);
- }
- else if (siggnal != TARGET_SIGNAL_0)
- {
- /* Continue ptid with signal. */
- p += xsnprintf (p, endp - p, "vCont;C%02x:", siggnal);
- p = write_ptid (p, endp, ptid);
- }
- else
- {
- /* Continue ptid. */
- p += xsnprintf (p, endp - p, "vCont;c:");
- p = write_ptid (p, endp, ptid);
- }
+ p = append_resumption (p, endp, ptid, step, siggnal);
}
gdb_assert (strlen (rs->buf) < get_remote_packet_size ());
remote_pass_signals ();
/* The vCont packet doesn't need to specify threads via Hc. */
- if (remote_vcont_resume (ptid, step, siggnal))
- goto done;
+ /* No reverse support (yet) for vCont. */
+ if (execution_direction != EXEC_REVERSE)
+ if (remote_vcont_resume (ptid, step, siggnal))
+ goto done;
/* All other supported resume packets do use Hc, so set the continue
thread. */
if (info_verbose && siggnal != TARGET_SIGNAL_0)
warning (" - Can't pass signal %d to target in reverse: ignored.\n",
siggnal);
+
+ if (step
+ && remote_protocol_packets[PACKET_bs].support == PACKET_DISABLE)
+ error (_("Remote reverse-step not supported."));
+ if (!step
+ && remote_protocol_packets[PACKET_bc].support == PACKET_DISABLE)
+ error (_("Remote reverse-continue not supported."));
+
strcpy (buf, step ? "bs" : "bc");
}
else if (siggnal != TARGET_SIGNAL_0)
struct remote_state *rs = get_remote_state ();
char *p = rs->buf;
char *endp = rs->buf + get_remote_packet_size ();
- struct stop_reply *reply, *next;
if (remote_protocol_packets[PACKET_vCont].support == PACKET_SUPPORT_UNKNOWN)
remote_vcont_probe (rs);
if (!rs->support_vCont_t)
error (_("Remote server does not support stopping threads"));
- if (ptid_equal (ptid, minus_one_ptid))
+ if (ptid_equal (ptid, minus_one_ptid)
+ || (!remote_multi_process_p (rs) && ptid_is_pid (ptid)))
p += xsnprintf (p, endp - p, "vCont;t");
else
{
ptid_t nptid;
- /* Step inferior_ptid. */
p += xsnprintf (p, endp - p, "vCont;t:");
if (ptid_is_pid (ptid))
{
struct remote_state *rs = get_remote_state ();
+ rs->ctrlc_pending_p = 1;
+
/* If the inferior is stopped already, but the core didn't know
about it yet, just ignore the request. The cached wait status
will be collected in remote_wait. */
if (rs->cached_wait_status)
return;
- /* Send a break or a ^C, depending on user preference. */
-
- if (remote_break)
- serial_send_break (remote_desc);
- else
- serial_write (remote_desc, "\003", 1);
+ /* Send interrupt_sequence to remote target. */
+ send_interrupt_sequence ();
}
/* This is the generic stop called via the target vector. When a target
/* Nothing to do. */
return;
- /* FIXME: cagney/1999-09-27: Shouldn't need to test for
- sync_execution here. This function should only be called when
- GDB is resuming the inferior in the forground. A background
- resume (``run&'') should leave GDB in control of the terminal and
- consequently should not call this code. */
- if (!sync_execution)
- return;
- /* FIXME: cagney/1999-09-27: Closely related to the above. Make
- calls target_terminal_*() idenpotent. The event-loop GDB talking
- to an asynchronous target with a synchronous command calls this
- function from both event-top.c and infrun.c/infcmd.c. Once GDB
- stops trying to transfer the terminal to the target when it
- shouldn't this guard can go away. */
+ /* FIXME: cagney/1999-09-27: Make calls to target_terminal_*()
+ idempotent. The event-loop GDB talking to an asynchronous target
+ with a synchronous command calls this function from both
+ event-top.c and infrun.c/infcmd.c. Once GDB stops trying to
+ transfer the terminal to the target when it shouldn't this guard
+ can go away. */
if (!remote_async_terminal_ours_p)
return;
delete_file_handler (input_fd);
return;
/* See FIXME in remote_terminal_inferior. */
- if (!sync_execution)
- return;
- /* See FIXME in remote_terminal_inferior. */
if (remote_async_terminal_ours_p)
return;
cleanup_sigint_signal_handler (NULL);
int solibs_changed;
int replay_event;
+
+ int core;
};
/* The list of already fetched and acknowledged stop events. */
event->replay_event = 0;
event->stopped_by_watchpoint_p = 0;
event->regcache = NULL;
+ event->core = -1;
switch (buf[0])
{
case 'T': /* Status with PC, SP, FP, ... */
- {
- gdb_byte regs[MAX_REGISTER_SIZE];
-
- /* Expedited reply, containing Signal, {regno, reg} repeat. */
- /* format is: 'Tssn...:r...;n...:r...;n...:r...;#cc', where
- ss = signal number
- n... = register number
- r... = register contents
- */
-
- p = &buf[3]; /* after Txx */
- while (*p)
- {
- char *p1;
- char *p_temp;
- int fieldsize;
- LONGEST pnum = 0;
+ /* Expedited reply, containing Signal, {regno, reg} repeat. */
+ /* format is: 'Tssn...:r...;n...:r...;n...:r...;#cc', where
+ ss = signal number
+ n... = register number
+ r... = register contents
+ */
+
+ p = &buf[3]; /* after Txx */
+ while (*p)
+ {
+ char *p1;
+ char *p_temp;
+ int fieldsize;
+ LONGEST pnum = 0;
- /* If the packet contains a register number, save it in
- pnum and set p1 to point to the character following it.
- Otherwise p1 points to p. */
+ /* If the packet contains a register number, save it in
+ pnum and set p1 to point to the character following it.
+ Otherwise p1 points to p. */
- /* If this packet is an awatch packet, don't parse the 'a'
- as a register number. */
+ /* If this packet is an awatch packet, don't parse the 'a'
+ as a register number. */
- if (strncmp (p, "awatch", strlen("awatch")) != 0)
- {
- /* Read the ``P'' register number. */
- pnum = strtol (p, &p_temp, 16);
- p1 = p_temp;
- }
- else
- p1 = p;
+ if (strncmp (p, "awatch", strlen("awatch")) != 0
+ && strncmp (p, "core", strlen ("core") != 0))
+ {
+ /* Read the ``P'' register number. */
+ pnum = strtol (p, &p_temp, 16);
+ p1 = p_temp;
+ }
+ else
+ p1 = p;
- if (p1 == p) /* No register number present here. */
- {
- p1 = strchr (p, ':');
- if (p1 == NULL)
- error (_("Malformed packet(a) (missing colon): %s\n\
+ if (p1 == p) /* No register number present here. */
+ {
+ p1 = strchr (p, ':');
+ if (p1 == NULL)
+ error (_("Malformed packet(a) (missing colon): %s\n\
Packet: '%s'\n"),
- p, buf);
- if (strncmp (p, "thread", p1 - p) == 0)
- event->ptid = read_ptid (++p1, &p);
- else if ((strncmp (p, "watch", p1 - p) == 0)
- || (strncmp (p, "rwatch", p1 - p) == 0)
- || (strncmp (p, "awatch", p1 - p) == 0))
- {
- event->stopped_by_watchpoint_p = 1;
- p = unpack_varlen_hex (++p1, &addr);
- event->watch_data_address = (CORE_ADDR) addr;
- }
- else if (strncmp (p, "library", p1 - p) == 0)
- {
- p1++;
- p_temp = p1;
- while (*p_temp && *p_temp != ';')
- p_temp++;
+ p, buf);
+ if (strncmp (p, "thread", p1 - p) == 0)
+ event->ptid = read_ptid (++p1, &p);
+ else if ((strncmp (p, "watch", p1 - p) == 0)
+ || (strncmp (p, "rwatch", p1 - p) == 0)
+ || (strncmp (p, "awatch", p1 - p) == 0))
+ {
+ event->stopped_by_watchpoint_p = 1;
+ p = unpack_varlen_hex (++p1, &addr);
+ event->watch_data_address = (CORE_ADDR) addr;
+ }
+ else if (strncmp (p, "library", p1 - p) == 0)
+ {
+ p1++;
+ p_temp = p1;
+ while (*p_temp && *p_temp != ';')
+ p_temp++;
- event->solibs_changed = 1;
+ event->solibs_changed = 1;
+ p = p_temp;
+ }
+ else if (strncmp (p, "replaylog", p1 - p) == 0)
+ {
+ /* NO_HISTORY event.
+ p1 will indicate "begin" or "end", but
+ it makes no difference for now, so ignore it. */
+ event->replay_event = 1;
+ p_temp = strchr (p1 + 1, ';');
+ if (p_temp)
p = p_temp;
- }
- else if (strncmp (p, "replaylog", p1 - p) == 0)
- {
- /* NO_HISTORY event.
- p1 will indicate "begin" or "end", but
- it makes no difference for now, so ignore it. */
- event->replay_event = 1;
- p_temp = strchr (p1 + 1, ';');
- if (p_temp)
- p = p_temp;
- }
- else
- {
- /* Silently skip unknown optional info. */
- p_temp = strchr (p1 + 1, ';');
- if (p_temp)
- p = p_temp;
- }
- }
- else
- {
- struct packet_reg *reg = packet_reg_from_pnum (rsa, pnum);
- cached_reg_t cached_reg;
+ }
+ else if (strncmp (p, "core", p1 - p) == 0)
+ {
+ ULONGEST c;
+ p = unpack_varlen_hex (++p1, &c);
+ event->core = c;
+ }
+ else
+ {
+ /* Silently skip unknown optional info. */
+ p_temp = strchr (p1 + 1, ';');
+ if (p_temp)
+ p = p_temp;
+ }
+ }
+ else
+ {
+ struct packet_reg *reg = packet_reg_from_pnum (rsa, pnum);
+ cached_reg_t cached_reg;
- p = p1;
+ p = p1;
- if (*p != ':')
- error (_("Malformed packet(b) (missing colon): %s\n\
+ if (*p != ':')
+ error (_("Malformed packet(b) (missing colon): %s\n\
Packet: '%s'\n"),
- p, buf);
- ++p;
+ p, buf);
+ ++p;
- if (reg == NULL)
- error (_("Remote sent bad register number %s: %s\n\
+ if (reg == NULL)
+ error (_("Remote sent bad register number %s: %s\n\
Packet: '%s'\n"),
- phex_nz (pnum, 0), p, buf);
+ phex_nz (pnum, 0), p, buf);
- cached_reg.num = reg->regnum;
+ cached_reg.num = reg->regnum;
- fieldsize = hex2bin (p, cached_reg.data,
- register_size (target_gdbarch,
- reg->regnum));
- p += 2 * fieldsize;
- if (fieldsize < register_size (target_gdbarch,
- reg->regnum))
- warning (_("Remote reply is too short: %s"), buf);
+ fieldsize = hex2bin (p, cached_reg.data,
+ register_size (target_gdbarch,
+ reg->regnum));
+ p += 2 * fieldsize;
+ if (fieldsize < register_size (target_gdbarch,
+ reg->regnum))
+ warning (_("Remote reply is too short: %s"), buf);
- VEC_safe_push (cached_reg_t, event->regcache, &cached_reg);
- }
+ VEC_safe_push (cached_reg_t, event->regcache, &cached_reg);
+ }
- if (*p != ';')
- error (_("Remote register badly formatted: %s\nhere: %s"),
- buf, p);
- ++p;
- }
- }
+ if (*p != ';')
+ error (_("Remote register badly formatted: %s\nhere: %s"),
+ buf, p);
+ ++p;
+ }
/* fall through */
case 'S': /* Old style status, just signal only. */
if (event->solibs_changed)
remote_get_pending_stop_replies (void)
{
struct remote_state *rs = get_remote_state ();
- int ret;
if (pending_stop_reply)
{
struct target_waitstatus *status)
{
ptid_t ptid;
+ struct thread_info *info;
*status = stop_reply->ws;
ptid = stop_reply->ptid;
/* Expedited registers. */
if (stop_reply->regcache)
{
+ struct regcache *regcache
+ = get_thread_arch_regcache (ptid, target_gdbarch);
cached_reg_t *reg;
int ix;
for (ix = 0;
VEC_iterate(cached_reg_t, stop_reply->regcache, ix, reg);
ix++)
- regcache_raw_supply (get_thread_regcache (ptid),
- reg->num, reg->data);
+ regcache_raw_supply (regcache, reg->num, reg->data);
VEC_free (cached_reg_t, stop_reply->regcache);
}
remote_watch_data_address = stop_reply->watch_data_address;
remote_notice_new_inferior (ptid, 0);
+ demand_private_info (ptid)->core = stop_reply->core;
}
stop_reply_xfree (stop_reply);
/* The non-stop mode version of target_wait. */
static ptid_t
-remote_wait_ns (ptid_t ptid, struct target_waitstatus *status)
+remote_wait_ns (ptid_t ptid, struct target_waitstatus *status, int options)
{
struct remote_state *rs = get_remote_state ();
- struct remote_arch_state *rsa = get_remote_arch_state ();
- ptid_t event_ptid = null_ptid;
struct stop_reply *stop_reply;
int ret;
if (stop_reply != NULL)
return process_stop_reply (stop_reply, status);
- /* Still no event. If we're in asynchronous mode, then just
+ /* Still no event. If we're just polling for an event, then
return to the event loop. */
- if (remote_is_async_p ())
+ if (options & TARGET_WNOHANG)
{
status->kind = TARGET_WAITKIND_IGNORE;
return minus_one_ptid;
}
- /* Otherwise, asynchronous mode is masked, so do a blocking
- wait. */
+ /* Otherwise do a blocking wait. */
ret = getpkt_or_notif_sane (&rs->buf, &rs->buf_size,
1 /* forever */);
}
STATUS just as `wait' would. */
static ptid_t
-remote_wait_as (ptid_t ptid, struct target_waitstatus *status)
+remote_wait_as (ptid_t ptid, struct target_waitstatus *status, int options)
{
struct remote_state *rs = get_remote_state ();
- struct remote_arch_state *rsa = get_remote_arch_state ();
ptid_t event_ptid = null_ptid;
- ULONGEST addr;
- int solibs_changed = 0;
- char *buf, *p;
+ char *buf;
struct stop_reply *stop_reply;
+ again:
+
status->kind = TARGET_WAITKIND_IGNORE;
status->value.integer = 0;
/* We got something. */
rs->waiting_for_stop_reply = 0;
+ /* Assume that the target has acknowledged Ctrl-C unless we receive
+ an 'F' or 'O' packet. */
+ if (buf[0] != 'F' && buf[0] != 'O')
+ rs->ctrlc_pending_p = 0;
+
switch (buf[0])
{
case 'E': /* Error of some sort. */
status->value.sig = TARGET_SIGNAL_0;
break;
case 'F': /* File-I/O request. */
- remote_fileio_request (buf);
+ remote_fileio_request (buf, rs->ctrlc_pending_p);
+ rs->ctrlc_pending_p = 0;
break;
case 'T': case 'S': case 'X': case 'W':
{
}
if (status->kind == TARGET_WAITKIND_IGNORE)
- /* Nothing interesting happened. */
- return minus_one_ptid;
+ {
+ /* Nothing interesting happened. If we're doing a non-blocking
+ poll, we're done. Otherwise, go back to waiting. */
+ if (options & TARGET_WNOHANG)
+ return minus_one_ptid;
+ else
+ goto again;
+ }
else if (status->kind != TARGET_WAITKIND_EXITED
&& status->kind != TARGET_WAITKIND_SIGNALLED)
{
static ptid_t
remote_wait (struct target_ops *ops,
- ptid_t ptid, struct target_waitstatus *status)
+ ptid_t ptid, struct target_waitstatus *status, int options)
{
ptid_t event_ptid;
if (non_stop)
- event_ptid = remote_wait_ns (ptid, status);
+ event_ptid = remote_wait_ns (ptid, status, options);
else
- {
- /* In synchronous mode, keep waiting until the target stops. In
- asynchronous mode, always return to the event loop. */
-
- do
- {
- event_ptid = remote_wait_as (ptid, status);
- }
- while (status->kind == TARGET_WAITKIND_IGNORE
- && !target_can_async_p ());
- }
+ event_ptid = remote_wait_as (ptid, status, options);
if (target_can_async_p ())
{
*p++ = 'p';
p += hexnumstr (p, reg->pnum);
*p++ = '\0';
- remote_send (&rs->buf, &rs->buf_size);
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
buf = rs->buf;
case PACKET_UNKNOWN:
return 0;
case PACKET_ERROR:
- error (_("Could not fetch register \"%s\""),
- gdbarch_register_name (get_regcache_arch (regcache), reg->regnum));
+ error (_("Could not fetch register \"%s\"; remote failure reply '%s'"),
+ gdbarch_register_name (get_regcache_arch (regcache),
+ reg->regnum),
+ buf);
}
/* If this register is unfetchable, tell the regcache. */
send_g_packet (void)
{
struct remote_state *rs = get_remote_state ();
- int i, buf_len;
- char *p;
- char *regs;
+ int buf_len;
sprintf (rs->buf, "g");
remote_send (&rs->buf, &rs->buf_size);
remote_fetch_registers (struct target_ops *ops,
struct regcache *regcache, int regnum)
{
- struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
packet was not recognized. */
static int
-store_register_using_P (const struct regcache *regcache, struct packet_reg *reg)
+store_register_using_P (const struct regcache *regcache,
+ struct packet_reg *reg)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct remote_state *rs = get_remote_state ();
- struct remote_arch_state *rsa = get_remote_arch_state ();
/* Try storing a single register. */
char *buf = rs->buf;
gdb_byte regp[MAX_REGISTER_SIZE];
p = buf + strlen (buf);
regcache_raw_collect (regcache, reg->regnum, regp);
bin2hex (regp, p, register_size (gdbarch, reg->regnum));
- remote_send (&rs->buf, &rs->buf_size);
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_P]))
{
case PACKET_OK:
return 1;
case PACKET_ERROR:
- error (_("Could not write register \"%s\""),
- gdbarch_register_name (gdbarch, reg->regnum));
+ error (_("Could not write register \"%s\"; remote failure reply '%s'"),
+ gdbarch_register_name (gdbarch, reg->regnum), rs->buf);
case PACKET_UNKNOWN:
return 0;
default:
/* remote_prepare_to_store insures that rsa->sizeof_g_packet gets
updated. */
bin2hex (regs, p, rsa->sizeof_g_packet);
- remote_send (&rs->buf, &rs->buf_size);
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (packet_check_result (rs->buf) == PACKET_ERROR)
+ error (_("Could not write registers; remote failure reply '%s'"),
+ rs->buf);
}
/* Store register REGNUM, or all registers if REGNUM == -1, from the contents
remote_store_registers (struct target_ops *ops,
struct regcache *regcache, int regnum)
{
- struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
remote_flash_erase (struct target_ops *ops,
ULONGEST address, LONGEST length)
{
+ int addr_size = gdbarch_addr_bit (target_gdbarch) / 8;
int saved_remote_timeout = remote_timeout;
enum packet_result ret;
remote_timeout = remote_flash_timeout;
ret = remote_send_printf ("vFlashErase:%s,%s",
- paddr (address),
+ phex (address, addr_size),
phex (length, 4));
switch (ret)
{
struct cleanup *old_chain;
struct ui_file *stb;
char *str;
- long length;
stb = mem_fileopen ();
old_chain = make_cleanup_ui_file_delete (stb);
fputstrn_unfiltered (buf, n, 0, stb);
- str = ui_file_xstrdup (stb, &length);
+ str = ui_file_xstrdup (stb, NULL);
do_cleanups (old_chain);
return str;
}
int c;
int tries;
int timeout;
- int val;
+ int val = -1;
/* We're reading a new response. Make sure we don't look at a
previously cached response. */
\f
static void
-remote_kill (void)
+remote_kill (struct target_ops *ops)
{
/* Use catch_errors so the user can quit from gdb even when we
aren't on speaking terms with the remote system. */
}
static void
-extended_remote_kill (void)
+extended_remote_kill (struct target_ops *ops)
{
int res;
int pid = ptid_get_pid (inferior_ptid);
{
unpush_target (target);
- /* remote_close takes care of cleaning up. */
-}
-
-static int
-select_new_thread_callback (struct thread_info *th, void* data)
-{
- if (!is_exited (th->ptid))
- {
- switch_to_thread (th->ptid);
- printf_filtered (_("[Switching to %s]\n"),
- target_pid_to_str (inferior_ptid));
- return 1;
- }
- return 0;
+ /* remote_close takes care of doing most of the clean up. */
+ generic_mourn_inferior ();
}
static void
/* Call common code to mark the inferior as not running. */
generic_mourn_inferior ();
- if (have_inferiors ())
- {
- extern void nullify_last_target_wait_ptid ();
- /* Multi-process case. The current process has exited, but
- there are other processes to debug. Switch to the first
- available. */
- iterate_over_threads (select_new_thread_callback, NULL);
- nullify_last_target_wait_ptid ();
- }
- else
+ if (!have_inferiors ())
{
if (!remote_multi_process_p (rs))
{
so that the user can say "kill" again. */
inferior_ptid = magic_null_ptid;
}
- else
- {
- /* Mark this (still pushed) target as not executable until we
- restart it. */
- target_mark_exited (target);
- }
}
- else
- /* Always remove execution if this was the last process. */
- target_mark_exited (target);
}
}
extended_remote_run (char *args)
{
struct remote_state *rs = get_remote_state ();
- char *p;
int len;
/* If the user has disabled vRun support, or we have detected that
extended_remote_restart ();
}
- /* Clean up from the last time we ran, before we mark the target
- running again. This will mark breakpoints uninserted, and
- get_offsets may insert breakpoints. */
- init_thread_list ();
- init_wait_for_inferior ();
+ if (!have_inferiors ())
+ {
+ /* Clean up from the last time we ran, before we mark the target
+ running again. This will mark breakpoints uninserted, and
+ get_offsets may insert breakpoints. */
+ init_thread_list ();
+ init_wait_for_inferior ();
+ }
/* Now mark the inferior as running before we do anything else. */
inferior_ptid = magic_null_ptid;
/* Now, if we have thread information, update inferior_ptid. */
inferior_ptid = remote_current_thread (inferior_ptid);
- remote_add_inferior (ptid_get_pid (inferior_ptid));
+ remote_add_inferior (ptid_get_pid (inferior_ptid), 0);
add_thread_silent (inferior_ptid);
/* Get updated offsets, if the stub uses qOffsets. */
which don't, we insert a traditional memory breakpoint. */
static int
-remote_insert_breakpoint (struct bp_target_info *bp_tgt)
+remote_insert_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
/* Try the "Z" s/w breakpoint packet if it is not already disabled.
If it succeeds, then set the support to PACKET_ENABLE. If it
char *p;
int bpsize;
- gdbarch_breakpoint_from_pc (target_gdbarch, &addr, &bpsize);
+ gdbarch_remote_breakpoint_from_pc (gdbarch, &addr, &bpsize);
rs = get_remote_state ();
p = rs->buf;
}
}
- return memory_insert_breakpoint (bp_tgt);
+ return memory_insert_breakpoint (gdbarch, bp_tgt);
}
static int
-remote_remove_breakpoint (struct bp_target_info *bp_tgt)
+remote_remove_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
CORE_ADDR addr = bp_tgt->placed_address;
struct remote_state *rs = get_remote_state ();
- int bp_size;
if (remote_protocol_packets[PACKET_Z0].support != PACKET_DISABLE)
{
return (rs->buf[0] == 'E');
}
- return memory_remove_breakpoint (bp_tgt);
+ return memory_remove_breakpoint (gdbarch, bp_tgt);
}
static int
static int
-remote_insert_hw_breakpoint (struct bp_target_info *bp_tgt)
+remote_insert_hw_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
CORE_ADDR addr;
struct remote_state *rs;
/* The length field should be set to the size of a breakpoint
instruction, even though we aren't inserting one ourselves. */
- gdbarch_breakpoint_from_pc
- (target_gdbarch, &bp_tgt->placed_address, &bp_tgt->placed_size);
+ gdbarch_remote_breakpoint_from_pc
+ (gdbarch, &bp_tgt->placed_address, &bp_tgt->placed_size);
if (remote_protocol_packets[PACKET_Z1].support == PACKET_DISABLE)
return -1;
static int
-remote_remove_hw_breakpoint (struct bp_target_info *bp_tgt)
+remote_remove_hw_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
CORE_ADDR addr;
struct remote_state *rs = get_remote_state ();
struct remote_state *rs = get_remote_state ();
asection *s;
unsigned long host_crc, target_crc;
- extern bfd *exec_bfd;
struct cleanup *old_chain;
char *tmp;
char *sectdata;
getpkt (&rs->buf, &rs->buf_size, 0);
if (rs->buf[0] == 'E')
- error (_("target memory fault, section %s, range 0x%s -- 0x%s"),
- sectname, paddr (lma), paddr (lma + size));
+ error (_("target memory fault, section %s, range %s -- %s"), sectname,
+ paddress (target_gdbarch, lma),
+ paddress (target_gdbarch, lma + size));
if (rs->buf[0] != 'C')
error (_("remote target does not support this operation"));
for (target_crc = 0, tmp = &rs->buf[1]; *tmp; tmp++)
target_crc = target_crc * 16 + fromhex (*tmp);
- printf_filtered ("Section %s, range 0x%s -- 0x%s: ",
- sectname, paddr (lma), paddr (lma + size));
+ printf_filtered ("Section %s, range %s -- %s: ", sectname,
+ paddress (target_gdbarch, lma),
+ paddress (target_gdbarch, lma + size));
if (host_crc == target_crc)
printf_filtered ("matched.\n");
else
{
int i, buf_len;
ULONGEST n;
- gdb_byte *wbuf;
struct remote_state *rs = get_remote_state ();
int max_size = get_memory_write_packet_size ();
static ULONGEST finished_offset;
struct remote_state *rs = get_remote_state ();
- unsigned int total = 0;
LONGEST i, n, packet_len;
if (packet->support == PACKET_DISABLE)
(ops, "osdata", annex, readbuf, offset, len,
&remote_protocol_packets[PACKET_qXfer_osdata]);
+ case TARGET_OBJECT_THREADS:
+ gdb_assert (annex == NULL);
+ return remote_read_qxfer (ops, "threads", annex, readbuf, offset, len,
+ &remote_protocol_packets[PACKET_qXfer_threads]);
+
default:
return -1;
}
const gdb_byte *pattern, ULONGEST pattern_len,
CORE_ADDR *found_addrp)
{
+ int addr_size = gdbarch_addr_bit (target_gdbarch) / 8;
struct remote_state *rs = get_remote_state ();
int max_size = get_memory_write_packet_size ();
struct packet_config *packet =
/* Insert header. */
i = snprintf (rs->buf, max_size,
"qSearch:memory:%s;%s;",
- paddr_nz (start_addr),
+ phex_nz (start_addr, addr_size),
phex_nz (search_space_len, sizeof (search_space_len)));
max_size -= (i + 1);
{
char *buf;
- /* XXX - see also tracepoint.c:remote_get_noisy_reply(). */
+ /* XXX - see also remote_get_noisy_reply(). */
rs->buf[0] = '\0';
getpkt (&rs->buf, &rs->buf_size, 0);
buf = rs->buf;
static char buf[64];
struct remote_state *rs = get_remote_state ();
- if (ptid_equal (magic_null_ptid, ptid))
- {
- xsnprintf (buf, sizeof buf, "Thread <main>");
- return buf;
- }
- else if (remote_multi_process_p (rs)
- && ptid_get_tid (ptid) != 0 && ptid_get_pid (ptid) != 0)
+ if (ptid_is_pid (ptid))
{
- xsnprintf (buf, sizeof buf, "Thread %d.%ld",
- ptid_get_pid (ptid), ptid_get_tid (ptid));
- return buf;
+ /* Printing an inferior target id. */
+
+ /* When multi-process extensions are off, there's no way in the
+ remote protocol to know the remote process id, if there's any
+ at all. There's one exception --- when we're connected with
+ target extended-remote, and we manually attached to a process
+ with "attach PID". We don't record anywhere a flag that
+ allows us to distinguish that case from the case of
+ connecting with extended-remote and the stub already being
+ attached to a process, and reporting yes to qAttached, hence
+ no smart special casing here. */
+ if (!remote_multi_process_p (rs))
+ {
+ xsnprintf (buf, sizeof buf, "Remote target");
+ return buf;
+ }
+
+ return normal_pid_to_str (ptid);
}
- else if (ptid_get_tid (ptid) != 0)
+ else
{
- xsnprintf (buf, sizeof buf, "Thread %ld",
- ptid_get_tid (ptid));
+ if (ptid_equal (magic_null_ptid, ptid))
+ xsnprintf (buf, sizeof buf, "Thread <main>");
+ else if (remote_multi_process_p (rs))
+ xsnprintf (buf, sizeof buf, "Thread %d.%ld",
+ ptid_get_pid (ptid), ptid_get_tid (ptid));
+ else
+ xsnprintf (buf, sizeof buf, "Thread %ld",
+ ptid_get_tid (ptid));
return buf;
}
-
- return normal_pid_to_str (ptid);
}
/* Get the address of the thread local variable in OBJFILE which is
remote_file_get (const char *remote_file, const char *local_file, int from_tty)
{
struct cleanup *back_to, *close_cleanup;
- int retcode, fd, remote_errno, bytes, io_size;
+ int fd, remote_errno, bytes, io_size;
FILE *file;
gdb_byte *buffer;
ULONGEST offset;
help_list (remote_cmdlist, "remote ", -1, gdb_stdout);
}
-static int remote_target_can_reverse = 1;
-
static int
remote_can_execute_reverse (void)
{
- return remote_target_can_reverse;
+ if (remote_protocol_packets[PACKET_bs].support == PACKET_ENABLE
+ || remote_protocol_packets[PACKET_bc].support == PACKET_ENABLE)
+ return 1;
+ else
+ return 0;
}
static int
return remote_multi_process_p (rs);
}
+int
+remote_supports_cond_tracepoints (void)
+{
+ struct remote_state *rs = get_remote_state ();
+ return rs->cond_tracepoints;
+}
+
+int
+remote_supports_fast_tracepoints (void)
+{
+ struct remote_state *rs = get_remote_state ();
+ return rs->fast_tracepoints;
+}
+
+static void
+remote_trace_init ()
+{
+ putpkt ("QTinit");
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Target does not support this command."));
+}
+
+static void free_actions_list (char **actions_list);
+static void free_actions_list_cleanup_wrapper (void *);
+static void
+free_actions_list_cleanup_wrapper (void *al)
+{
+ free_actions_list (al);
+}
+
+static void
+free_actions_list (char **actions_list)
+{
+ int ndx;
+
+ if (actions_list == 0)
+ return;
+
+ for (ndx = 0; actions_list[ndx]; ndx++)
+ xfree (actions_list[ndx]);
+
+ xfree (actions_list);
+}
+
+static void
+remote_download_tracepoint (struct breakpoint *t)
+{
+ CORE_ADDR tpaddr;
+ char tmp[40];
+ char buf[2048];
+ char **tdp_actions;
+ char **stepping_actions;
+ int ndx;
+ struct cleanup *old_chain = NULL;
+ struct agent_expr *aexpr;
+ struct cleanup *aexpr_chain = NULL;
+ char *pkt;
+
+ encode_actions (t, &tdp_actions, &stepping_actions);
+ old_chain = make_cleanup (free_actions_list_cleanup_wrapper,
+ tdp_actions);
+ (void) make_cleanup (free_actions_list_cleanup_wrapper, stepping_actions);
+
+ tpaddr = t->loc->address;
+ sprintf_vma (tmp, (t->loc ? tpaddr : 0));
+ sprintf (buf, "QTDP:%x:%s:%c:%lx:%x", t->number,
+ tmp, /* address */
+ (t->enable_state == bp_enabled ? 'E' : 'D'),
+ t->step_count, t->pass_count);
+ /* Fast tracepoints are mostly handled by the target, but we can
+ tell the target how big of an instruction block should be moved
+ around. */
+ if (t->type == bp_fast_tracepoint)
+ {
+ /* Only test for support at download time; we may not know
+ target capabilities at definition time. */
+ if (remote_supports_fast_tracepoints ())
+ {
+ int isize;
+
+ if (gdbarch_fast_tracepoint_valid_at (target_gdbarch,
+ tpaddr, &isize, NULL))
+ sprintf (buf + strlen (buf), ":F%x", isize);
+ else
+ /* If it passed validation at definition but fails now,
+ something is very wrong. */
+ internal_error (__FILE__, __LINE__,
+ "Fast tracepoint not valid during download");
+ }
+ else
+ /* Fast tracepoints are functionally identical to regular
+ tracepoints, so don't take lack of support as a reason to
+ give up on the trace run. */
+ warning (_("Target does not support fast tracepoints, downloading %d as regular tracepoint"), t->number);
+ }
+ /* If the tracepoint has a conditional, make it into an agent
+ expression and append to the definition. */
+ if (t->loc->cond)
+ {
+ /* Only test support at download time, we may not know target
+ capabilities at definition time. */
+ if (remote_supports_cond_tracepoints ())
+ {
+ aexpr = gen_eval_for_expr (t->loc->address, t->loc->cond);
+ aexpr_chain = make_cleanup_free_agent_expr (aexpr);
+ sprintf (buf + strlen (buf), ":X%x,", aexpr->len);
+ pkt = buf + strlen (buf);
+ for (ndx = 0; ndx < aexpr->len; ++ndx)
+ pkt = pack_hex_byte (pkt, aexpr->buf[ndx]);
+ *pkt = '\0';
+ do_cleanups (aexpr_chain);
+ }
+ else
+ warning (_("Target does not support conditional tracepoints, ignoring tp %d cond"), t->number);
+ }
+
+ if (t->actions || *default_collect)
+ strcat (buf, "-");
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Target does not support tracepoints."));
+
+ if (!t->actions && !*default_collect)
+ return;
+
+ /* do_single_steps (t); */
+ if (tdp_actions)
+ {
+ for (ndx = 0; tdp_actions[ndx]; ndx++)
+ {
+ QUIT; /* allow user to bail out with ^C */
+ sprintf (buf, "QTDP:-%x:%s:%s%c",
+ t->number, tmp, /* address */
+ tdp_actions[ndx],
+ ((tdp_actions[ndx + 1] || stepping_actions)
+ ? '-' : 0));
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf,
+ &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Error on target while setting tracepoints."));
+ }
+ }
+ if (stepping_actions)
+ {
+ for (ndx = 0; stepping_actions[ndx]; ndx++)
+ {
+ QUIT; /* allow user to bail out with ^C */
+ sprintf (buf, "QTDP:-%x:%s:%s%s%s",
+ t->number, tmp, /* address */
+ ((ndx == 0) ? "S" : ""),
+ stepping_actions[ndx],
+ (stepping_actions[ndx + 1] ? "-" : ""));
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf,
+ &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Error on target while setting tracepoints."));
+ }
+ }
+ do_cleanups (old_chain);
+ return;
+}
+
+static void
+remote_download_trace_state_variable (struct trace_state_variable *tsv)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p;
+
+ sprintf (rs->buf, "QTDV:%x:%s:%x:",
+ tsv->number, phex ((ULONGEST) tsv->initial_value, 8), tsv->builtin);
+ p = rs->buf + strlen (rs->buf);
+ if ((p - rs->buf) + strlen (tsv->name) * 2 >= get_remote_packet_size ())
+ error (_("Trace state variable name too long for tsv definition packet"));
+ p += 2 * bin2hex ((gdb_byte *) (tsv->name), p, 0);
+ *p++ = '\0';
+ putpkt (rs->buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+}
+
+static void
+remote_trace_set_readonly_regions ()
+{
+ asection *s;
+ bfd_size_type size;
+ bfd_vma lma;
+ int anysecs = 0;
+
+ if (!exec_bfd)
+ return; /* No information to give. */
+
+ strcpy (target_buf, "QTro");
+ for (s = exec_bfd->sections; s; s = s->next)
+ {
+ char tmp1[40], tmp2[40];
+
+ if ((s->flags & SEC_LOAD) == 0 ||
+ /* (s->flags & SEC_CODE) == 0 || */
+ (s->flags & SEC_READONLY) == 0)
+ continue;
+
+ anysecs = 1;
+ lma = s->lma;
+ size = bfd_get_section_size (s);
+ sprintf_vma (tmp1, lma);
+ sprintf_vma (tmp2, lma + size);
+ sprintf (target_buf + strlen (target_buf),
+ ":%s,%s", tmp1, tmp2);
+ }
+ if (anysecs)
+ {
+ putpkt (target_buf);
+ getpkt (&target_buf, &target_buf_size, 0);
+ }
+}
+
+static void
+remote_trace_start ()
+{
+ putpkt ("QTStart");
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Bogus reply from target: %s"), target_buf);
+}
+
+static int
+remote_get_trace_status (struct trace_status *ts)
+{
+ char *p, *p1, *p_temp;
+ ULONGEST val;
+ /* FIXME we need to get register block size some other way */
+ extern int trace_regblock_size;
+ trace_regblock_size = get_remote_arch_state ()->sizeof_g_packet;
+
+ putpkt ("qTStatus");
+ getpkt (&target_buf, &target_buf_size, 0);
+ /* FIXME should handle more variety of replies */
+
+ p = target_buf;
+
+ /* If the remote target doesn't do tracing, flag it. */
+ if (*p == '\0')
+ return -1;
+
+ /* We're working with a live target. */
+ ts->from_file = 0;
+
+ /* Set some defaults. */
+ ts->running_known = 0;
+ ts->stop_reason = trace_stop_reason_unknown;
+ ts->traceframe_count = -1;
+ ts->buffer_free = 0;
+
+ if (*p++ != 'T')
+ error (_("Bogus trace status reply from target: %s"), target_buf);
+
+ parse_trace_status (p, ts);
+
+ return ts->running;
+}
+
+static void
+remote_trace_stop ()
+{
+ putpkt ("QTStop");
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Bogus reply from target: %s"), target_buf);
+}
+
+static int
+remote_trace_find (enum trace_find_type type, int num,
+ ULONGEST addr1, ULONGEST addr2,
+ int *tpp)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p, *reply;
+ int target_frameno = -1, target_tracept = -1;
+
+ p = rs->buf;
+ strcpy (p, "QTFrame:");
+ p = strchr (p, '\0');
+ switch (type)
+ {
+ case tfind_number:
+ sprintf (p, "%x", num);
+ break;
+ case tfind_pc:
+ sprintf (p, "pc:%s", phex_nz (addr1, 0));
+ break;
+ case tfind_tp:
+ sprintf (p, "tdp:%x", num);
+ break;
+ case tfind_range:
+ sprintf (p, "range:%s:%s", phex_nz (addr1, 0), phex_nz (addr2, 0));
+ break;
+ case tfind_outside:
+ sprintf (p, "outside:%s:%s", phex_nz (addr1, 0), phex_nz (addr2, 0));
+ break;
+ default:
+ error ("Unknown trace find type %d", type);
+ }
+
+ putpkt (rs->buf);
+ reply = remote_get_noisy_reply (&(rs->buf), &sizeof_pkt);
+
+ while (reply && *reply)
+ switch (*reply)
+ {
+ case 'F':
+ if ((target_frameno = (int) strtol (++reply, &reply, 16)) == -1)
+ error (_("Target failed to find requested trace frame."));
+ break;
+ case 'T':
+ if ((target_tracept = (int) strtol (++reply, &reply, 16)) == -1)
+ error (_("Target failed to find requested trace frame."));
+ break;
+ case 'O': /* "OK"? */
+ if (reply[1] == 'K' && reply[2] == '\0')
+ reply += 2;
+ else
+ error (_("Bogus reply from target: %s"), reply);
+ break;
+ default:
+ error (_("Bogus reply from target: %s"), reply);
+ }
+ if (tpp)
+ *tpp = target_tracept;
+ return target_frameno;
+}
+
+static int
+remote_get_trace_state_variable_value (int tsvnum, LONGEST *val)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *reply;
+ ULONGEST uval;
+
+ sprintf (rs->buf, "qTV:%x", tsvnum);
+ putpkt (rs->buf);
+ reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (reply && *reply)
+ {
+ if (*reply == 'V')
+ {
+ unpack_varlen_hex (reply + 1, &uval);
+ *val = (LONGEST) uval;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int
+remote_save_trace_data (char *filename)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p, *reply;
+
+ p = rs->buf;
+ strcpy (p, "QTSave:");
+ p += strlen (p);
+ if ((p - rs->buf) + strlen (filename) * 2 >= get_remote_packet_size ())
+ error (_("Remote file name too long for trace save packet"));
+ p += 2 * bin2hex ((gdb_byte *) filename, p, 0);
+ *p++ = '\0';
+ putpkt (rs->buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ return 0;
+}
+
+/* This is basically a memory transfer, but needs to be its own packet
+ because we don't know how the target actually organizes its trace
+ memory, plus we want to be able to ask for as much as possible, but
+ not be unhappy if we don't get as much as we ask for. */
+
+static LONGEST
+remote_get_raw_trace_data (gdb_byte *buf, ULONGEST offset, LONGEST len)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *reply;
+ char *p;
+ int rslt;
+
+ p = rs->buf;
+ strcpy (p, "qTBuffer:");
+ p += strlen (p);
+ p += hexnumstr (p, offset);
+ *p++ = ',';
+ p += hexnumstr (p, len);
+ *p++ = '\0';
+
+ putpkt (rs->buf);
+ reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (reply && *reply)
+ {
+ /* 'l' by itself means we're at the end of the buffer and
+ there is nothing more to get. */
+ if (*reply == 'l')
+ return 0;
+
+ /* Convert the reply into binary. Limit the number of bytes to
+ convert according to our passed-in buffer size, rather than
+ what was returned in the packet; if the target is
+ unexpectedly generous and gives us a bigger reply than we
+ asked for, we don't want to crash. */
+ rslt = hex2bin (target_buf, buf, len);
+ return rslt;
+ }
+
+ /* Something went wrong, flag as an error. */
+ return -1;
+}
+
+static void
+remote_set_disconnected_tracing (int val)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ sprintf (rs->buf, "QTDisconnected:%x", val);
+ putpkt (rs->buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Target does not support this command."));
+}
+
+static int
+remote_core_of_thread (struct target_ops *ops, ptid_t ptid)
+{
+ struct thread_info *info = find_thread_ptid (ptid);
+ if (info && info->private)
+ return info->private->core;
+ return -1;
+}
+
static void
init_remote_ops (void)
{
remote_ops.to_log_command = serial_log_command;
remote_ops.to_get_thread_local_address = remote_get_thread_local_address;
remote_ops.to_stratum = process_stratum;
- remote_ops.to_has_all_memory = 1;
- remote_ops.to_has_memory = 1;
- remote_ops.to_has_stack = 1;
- remote_ops.to_has_registers = 1;
- remote_ops.to_has_execution = 1;
+ remote_ops.to_has_all_memory = default_child_has_all_memory;
+ remote_ops.to_has_memory = default_child_has_memory;
+ remote_ops.to_has_stack = default_child_has_stack;
+ remote_ops.to_has_registers = default_child_has_registers;
+ remote_ops.to_has_execution = default_child_has_execution;
remote_ops.to_has_thread_control = tc_schedlock; /* can lock scheduler */
remote_ops.to_can_execute_reverse = remote_can_execute_reverse;
remote_ops.to_magic = OPS_MAGIC;
remote_ops.to_terminal_ours = remote_terminal_ours;
remote_ops.to_supports_non_stop = remote_supports_non_stop;
remote_ops.to_supports_multi_process = remote_supports_multi_process;
+ remote_ops.to_trace_init = remote_trace_init;
+ remote_ops.to_download_tracepoint = remote_download_tracepoint;
+ remote_ops.to_download_trace_state_variable = remote_download_trace_state_variable;
+ remote_ops.to_trace_set_readonly_regions = remote_trace_set_readonly_regions;
+ remote_ops.to_trace_start = remote_trace_start;
+ remote_ops.to_get_trace_status = remote_get_trace_status;
+ remote_ops.to_trace_stop = remote_trace_stop;
+ remote_ops.to_trace_find = remote_trace_find;
+ remote_ops.to_get_trace_state_variable_value = remote_get_trace_state_variable_value;
+ remote_ops.to_save_trace_data = remote_save_trace_data;
+ remote_ops.to_upload_tracepoints = remote_upload_tracepoints;
+ remote_ops.to_upload_trace_state_variables = remote_upload_trace_state_variables;
+ remote_ops.to_get_raw_trace_data = remote_get_raw_trace_data;
+ remote_ops.to_set_disconnected_tracing = remote_set_disconnected_tracing;
+ remote_ops.to_core_of_thread = remote_core_of_thread;
}
/* Set up the extended remote vector by making a copy of the standard
remote_check_symbols (objfile);
}
+/* Pull all the tracepoints defined on the target and create local
+ data structures representing them. We don't want to create real
+ tracepoints yet, we don't want to mess up the user's existing
+ collection. */
+
+static int
+remote_upload_tracepoints (struct uploaded_tp **utpp)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p;
+
+ /* Ask for a first packet of tracepoint definition. */
+ putpkt ("qTfP");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ p = rs->buf;
+ while (*p && *p != 'l')
+ {
+ parse_tracepoint_definition (p, utpp);
+ /* Ask for another packet of tracepoint definition. */
+ putpkt ("qTsP");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ p = rs->buf;
+ }
+ return 0;
+}
+
+static int
+remote_upload_trace_state_variables (struct uploaded_tsv **utsvp)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p;
+
+ /* Ask for a first packet of variable definition. */
+ putpkt ("qTfV");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ p = rs->buf;
+ while (*p && *p != 'l')
+ {
+ parse_tsv_definition (p, utsvp);
+ /* Ask for another packet of variable definition. */
+ putpkt ("qTsV");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ p = rs->buf;
+ }
+ return 0;
+}
+
void
_initialize_remote (void)
{
struct remote_state *rs;
+ struct cmd_list_element *cmd;
+ char *cmd_name;
/* architecture specific data */
remote_gdbarch_data_handle =
Set whether to send break if interrupted."), _("\
Show whether to send break if interrupted."), _("\
If set, a break, instead of a cntrl-c, is sent to the remote target."),
- NULL, NULL, /* FIXME: i18n: Whether to send break if interrupted is %s. */
+ set_remotebreak, show_remotebreak,
&setlist, &showlist);
+ cmd_name = "remotebreak";
+ cmd = lookup_cmd (&cmd_name, setlist, "", -1, 1);
+ deprecate_cmd (cmd, "set remote interrupt-sequence");
+ cmd_name = "remotebreak"; /* needed because lookup_cmd updates the pointer */
+ cmd = lookup_cmd (&cmd_name, showlist, "", -1, 1);
+ deprecate_cmd (cmd, "show remote interrupt-sequence");
+
+ add_setshow_enum_cmd ("interrupt-sequence", class_support,
+ interrupt_sequence_modes, &interrupt_sequence_mode, _("\
+Set interrupt sequence to remote target."), _("\
+Show interrupt sequence to remote target."), _("\
+Valid value is \"Ctrl-C\", \"BREAK\" or \"BREAK-g\". The default is \"Ctrl-C\"."),
+ NULL, show_interrupt_sequence,
+ &remote_set_cmdlist,
+ &remote_show_cmdlist);
+
+ add_setshow_boolean_cmd ("interrupt-on-connect", class_support,
+ &interrupt_on_connect, _("\
+Set whether interrupt-sequence is sent to remote target when gdb connects to."), _(" \
+Show whether interrupt-sequence is sent to remote target when gdb connects to."), _(" \
+If set, interrupt sequence is sent to remote target."),
+ NULL, NULL,
+ &remote_set_cmdlist, &remote_show_cmdlist);
/* Install commands for configuring memory read/write packets. */
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_osdata],
"qXfer:osdata:read", "osdata", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_threads],
+ "qXfer:threads:read", "threads", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_siginfo_read],
"qXfer:siginfo:read", "read-siginfo-object", 0);
"qGetTLSAddr", "get-thread-local-storage-address",
0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_bc],
+ "bc", "reverse-continue", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_bs],
+ "bs", "reverse-step", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qSupported],
"qSupported", "supported-packets", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_vKill],
"vKill", "kill", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qAttached],
+ "qAttached", "query-attached", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_ConditionalTracepoints],
+ "ConditionalTracepoints", "conditional-tracepoints", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_FastTracepoints],
+ "FastTracepoints", "fast-tracepoints", 0);
+
/* Keep the old ``set remote Z-packet ...'' working. Each individual
Z sub-packet has its own set and show commands, but users may
have sets to this variable in their .gdbinit files (or in their
magic_null_ptid = ptid_build (42000, 1, -1);
not_sent_ptid = ptid_build (42000, 1, -2);
any_thread_ptid = ptid_build (42000, 1, 0);
+
+ target_buf_size = 2048;
+ target_buf = xmalloc (target_buf_size);
}