/* Remote target communications for serial-line targets in custom GDB protocol
- Copyright (C) 1988-2015 Free Software Foundation, Inc.
+ Copyright (C) 1988-2016 Free Software Foundation, Inc.
This file is part of GDB.
remote_register_number_and_offset (struct gdbarch *gdbarch, int regnum,
int *pnum, int *poffset)
{
- int sizeof_g_packet;
struct packet_reg *regs;
struct cleanup *old_chain;
regs = XCNEWVEC (struct packet_reg, gdbarch_num_regs (gdbarch));
old_chain = make_cleanup (xfree, regs);
- sizeof_g_packet = map_regcache_remote_table (gdbarch, regs);
+ map_regcache_remote_table (gdbarch, regs);
*pnum = regs[regnum].pnum;
*poffset = regs[regnum].offset;
PACKET_qSupported,
PACKET_qTStatus,
PACKET_QPassSignals,
+ PACKET_QCatchSyscalls,
PACKET_QProgramSignals,
PACKET_qCRC,
PACKET_qSearch_memory,
according to RUNNING. */
static void
-remote_add_thread (ptid_t ptid, int running)
+remote_add_thread (ptid_t ptid, int running, int executing)
{
struct remote_state *rs = get_remote_state ();
else
add_thread (ptid);
- set_executing (ptid, running);
+ set_executing (ptid, executing);
set_running (ptid, running);
}
It may be the first time we hear about such thread, so take the
opportunity to add it to GDB's thread list. In case this is the
first time we're noticing its corresponding inferior, add it to
- GDB's inferior list as well. */
+ GDB's inferior list as well. EXECUTING indicates whether the
+ thread is (internally) executing or stopped. */
static void
-remote_notice_new_inferior (ptid_t currthread, int running)
+remote_notice_new_inferior (ptid_t currthread, int executing)
{
+ /* In non-stop mode, we assume new found threads are (externally)
+ running until proven otherwise with a stop reply. In all-stop,
+ we can only get here if all threads are stopped. */
+ int running = target_is_non_stop_p () ? 1 : 0;
+
/* If this is a new thread, add it to GDB's thread list.
If we leave it up to WFI to do this, bad things will happen. */
{
/* We're seeing an event on a thread id we knew had exited.
This has to be a new thread reusing the old id. Add it. */
- remote_add_thread (currthread, running);
+ remote_add_thread (currthread, running, executing);
return;
}
thread_change_ptid (inferior_ptid, currthread);
else
{
- remote_add_thread (currthread, running);
+ remote_add_thread (currthread, running, executing);
inferior_ptid = currthread;
}
return;
}
/* This is really a new thread. Add it. */
- remote_add_thread (currthread, running);
+ remote_add_thread (currthread, running, executing);
/* If we found a new inferior, let the common code do whatever
it needs to with it (e.g., read shared libraries, insert
struct remote_state *rs = get_remote_state ();
if (!rs->starting_up)
- notice_new_inferior (currthread, running, 0);
+ notice_new_inferior (currthread, executing, 0);
}
}
}
}
}
+/* If 'QCatchSyscalls' is supported, tell the remote stub
+ to report syscalls to GDB. */
+
+static int
+remote_set_syscall_catchpoint (struct target_ops *self,
+ int pid, int needed, int any_count,
+ int table_size, int *table)
+{
+ char *catch_packet;
+ enum packet_result result;
+ int n_sysno = 0;
+
+ if (packet_support (PACKET_QCatchSyscalls) == PACKET_DISABLE)
+ {
+ /* Not supported. */
+ return 1;
+ }
+
+ if (needed && !any_count)
+ {
+ int i;
+
+ /* Count how many syscalls are to be caught (table[sysno] != 0). */
+ for (i = 0; i < table_size; i++)
+ {
+ if (table[i] != 0)
+ n_sysno++;
+ }
+ }
+
+ if (remote_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "remote_set_syscall_catchpoint "
+ "pid %d needed %d any_count %d n_sysno %d\n",
+ pid, needed, any_count, n_sysno);
+ }
+
+ if (needed)
+ {
+ /* Prepare a packet with the sysno list, assuming max 8+1
+ characters for a sysno. If the resulting packet size is too
+ big, fallback on the non-selective packet. */
+ const int maxpktsz = strlen ("QCatchSyscalls:1") + n_sysno * 9 + 1;
+
+ catch_packet = (char *) xmalloc (maxpktsz);
+ strcpy (catch_packet, "QCatchSyscalls:1");
+ if (!any_count)
+ {
+ int i;
+ char *p;
+
+ p = catch_packet;
+ p += strlen (p);
+
+ /* Add in catch_packet each syscall to be caught (table[i] != 0). */
+ for (i = 0; i < table_size; i++)
+ {
+ if (table[i] != 0)
+ p += xsnprintf (p, catch_packet + maxpktsz - p, ";%x", i);
+ }
+ }
+ if (strlen (catch_packet) > get_remote_packet_size ())
+ {
+ /* catch_packet too big. Fallback to less efficient
+ non selective mode, with GDB doing the filtering. */
+ catch_packet[sizeof ("QCatchSyscalls:1") - 1] = 0;
+ }
+ }
+ else
+ catch_packet = xstrdup ("QCatchSyscalls:0");
+
+ {
+ struct cleanup *old_chain = make_cleanup (xfree, catch_packet);
+ struct remote_state *rs = get_remote_state ();
+
+ putpkt (catch_packet);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ result = packet_ok (rs->buf, &remote_protocol_packets[PACKET_QCatchSyscalls]);
+ do_cleanups (old_chain);
+ if (result == PACKET_OK)
+ return 0;
+ else
+ return -1;
+ }
+}
+
/* If 'QProgramSignals' is supported, tell the remote stub what
signals it should pass through to the inferior when detaching. */
static int
remote_thread_always_alive (struct target_ops *ops, ptid_t ptid)
{
- struct remote_state *rs = get_remote_state ();
- char *p, *endp;
-
if (ptid_equal (ptid, magic_null_ptid))
/* The main thread is always alive. */
return 1;
static void
remote_update_thread_list (struct target_ops *ops)
{
- struct remote_state *rs = get_remote_state ();
struct threads_listing_context context;
struct cleanup *old_chain;
int got_list = 0;
{
struct private_thread_info *info;
/* In non-stop mode, we assume new found threads are
- running until proven otherwise with a stop reply. In
- all-stop, we can only get here if all threads are
+ executing until proven otherwise with a stop reply.
+ In all-stop, we can only get here if all threads are
stopped. */
- int running = target_is_non_stop_p () ? 1 : 0;
+ int executing = target_is_non_stop_p () ? 1 : 0;
- remote_notice_new_inferior (item->ptid, running);
+ remote_notice_new_inferior (item->ptid, executing);
info = demand_private_info (item->ptid);
info->core = item->core;
that as current. */
ALL_NON_EXITED_THREADS (thread)
{
- struct target_waitstatus *ws;
-
if (first == NULL)
first = thread;
else if (thread->state != THREAD_STOPPED)
continue;
- ws = &thread->suspend.waitstatus;
-
if (selected == NULL
&& thread->suspend.waitstatus_pending_p)
selected = thread;
- if (lowest_stopped == NULL || thread->num < lowest_stopped->num)
+ if (lowest_stopped == NULL
+ || thread->inf->num < lowest_stopped->inf->num
+ || thread->per_inf_num < lowest_stopped->per_inf_num)
lowest_stopped = thread;
if (non_stop)
if (!target_is_non_stop_p ())
{
- ptid_t ptid;
- int fake_pid_p = 0;
- struct inferior *inf;
-
if (rs->buf[0] == 'W' || rs->buf[0] == 'X')
{
if (!extended_p)
{
struct remote_state *rs = get_remote_state ();
char *msg, *reply, *tmp;
- struct bound_minimal_symbol sym;
int end;
+ long reply_size;
struct cleanup *old_chain;
/* The remote side has no concept of inferiors that aren't running
because we need both at the same time. */
msg = (char *) xmalloc (get_remote_packet_size ());
old_chain = make_cleanup (xfree, msg);
+ reply = (char *) xmalloc (get_remote_packet_size ());
+ make_cleanup (free_current_contents, &reply);
+ reply_size = get_remote_packet_size ();
/* Invite target to request symbol lookups. */
putpkt ("qSymbol::");
- getpkt (&rs->buf, &rs->buf_size, 0);
- packet_ok (rs->buf, &remote_protocol_packets[PACKET_qSymbol]);
- reply = rs->buf;
+ getpkt (&reply, &reply_size, 0);
+ packet_ok (reply, &remote_protocol_packets[PACKET_qSymbol]);
while (startswith (reply, "qSymbol:"))
{
}
putpkt (msg);
- getpkt (&rs->buf, &rs->buf_size, 0);
- reply = rs->buf;
+ getpkt (&reply, &reply_size, 0);
}
do_cleanups (old_chain);
PACKET_qXfer_traceframe_info },
{ "QPassSignals", PACKET_DISABLE, remote_supported_packet,
PACKET_QPassSignals },
+ { "QCatchSyscalls", PACKET_DISABLE, remote_supported_packet,
+ PACKET_QCatchSyscalls },
{ "QProgramSignals", PACKET_DISABLE, remote_supported_packet,
PACKET_QProgramSignals },
{ "QStartNoAckMode", PACKET_DISABLE, remote_supported_packet,
fork child threads from the CONTEXT list. */
ALL_NON_EXITED_THREADS (thread)
{
- struct target_waitstatus *ws = &thread->pending_follow;
+ struct target_waitstatus *ws;
+
+ if (thread->suspend.waitstatus_pending_p)
+ ws = &thread->suspend.waitstatus;
+ else
+ ws = &thread->pending_follow;
if (is_pending_fork_parent (ws, pid, thread->ptid))
{
static void
discard_pending_stop_replies (struct inferior *inf)
{
- int i;
struct queue_iter_param param;
struct stop_reply *reply;
struct remote_state *rs = get_remote_state ();
stop_reply_match_ptid_and_ws, &ptid);
}
-/* Skip PACKET until the next semi-colon (or end of string). */
-
-static char *
-skip_to_semicolon (char *p)
-{
- while (*p != '\0' && *p != ';')
- p++;
- return p;
-}
-
/* Helper for remote_parse_stop_reply. Return nonzero if the substring
starting with P and ending with PEND matches PREFIX. */
if (strprefix (p, p1, "thread"))
event->ptid = read_ptid (++p1, &p);
+ else if (strprefix (p, p1, "syscall_entry"))
+ {
+ ULONGEST sysno;
+
+ event->ws.kind = TARGET_WAITKIND_SYSCALL_ENTRY;
+ p = unpack_varlen_hex (++p1, &sysno);
+ event->ws.value.syscall_number = (int) sysno;
+ }
+ else if (strprefix (p, p1, "syscall_return"))
+ {
+ ULONGEST sysno;
+
+ event->ws.kind = TARGET_WAITKIND_SYSCALL_RETURN;
+ p = unpack_varlen_hex (++p1, &sysno);
+ event->ws.value.syscall_number = (int) sysno;
+ }
else if (strprefix (p, p1, "watch")
|| strprefix (p, p1, "rwatch")
|| strprefix (p, p1, "awatch"))
/* The value part is documented as "must be empty",
though we ignore it, in case we ever decide to make
use of it in a backward compatible way. */
- p = skip_to_semicolon (p1 + 1);
+ p = strchrnul (p1 + 1, ';');
}
else if (strprefix (p, p1, "hwbreak"))
{
error (_("Unexpected hwbreak stop reason"));
/* See above. */
- p = skip_to_semicolon (p1 + 1);
+ p = strchrnul (p1 + 1, ';');
}
else if (strprefix (p, p1, "library"))
{
event->ws.kind = TARGET_WAITKIND_LOADED;
- p = skip_to_semicolon (p1 + 1);
+ p = strchrnul (p1 + 1, ';');
}
else if (strprefix (p, p1, "replaylog"))
{
event->ws.kind = TARGET_WAITKIND_NO_HISTORY;
/* p1 will indicate "begin" or "end", but it makes
no difference for now, so ignore it. */
- p = skip_to_semicolon (p1 + 1);
+ p = strchrnul (p1 + 1, ';');
}
else if (strprefix (p, p1, "core"))
{
else if (strprefix (p, p1, "vforkdone"))
{
event->ws.kind = TARGET_WAITKIND_VFORK_DONE;
- p = skip_to_semicolon (p1 + 1);
+ p = strchrnul (p1 + 1, ';');
}
else if (strprefix (p, p1, "exec"))
{
else if (strprefix (p, p1, "create"))
{
event->ws.kind = TARGET_WAITKIND_THREAD_CREATED;
- p = skip_to_semicolon (p1 + 1);
+ p = strchrnul (p1 + 1, ';');
}
else
{
if (skipregs)
{
- p = skip_to_semicolon (p1 + 1);
+ p = strchrnul (p1 + 1, ';');
p++;
continue;
}
{
/* Not a number. Silently skip unknown optional
info. */
- p = skip_to_semicolon (p1 + 1);
+ p = strchrnul (p1 + 1, ';');
}
}
&& status->kind != TARGET_WAITKIND_SIGNALLED
&& status->kind != TARGET_WAITKIND_NO_RESUMED)
{
- struct remote_state *rs = get_remote_state ();
struct private_thread_info *remote_thr;
/* Expedited registers. */
status->value.sig = GDB_SIGNAL_0;
break;
case 'F': /* File-I/O request. */
+ /* GDB may access the inferior memory while handling the File-I/O
+ request, but we don't want GDB accessing memory while waiting
+ for a stop reply. See the comments in putpkt_binary. Set
+ waiting_for_stop_reply to 0 temporarily. */
+ rs->waiting_for_stop_reply = 0;
remote_fileio_request (buf, rs->ctrlc_pending_p);
rs->ctrlc_pending_p = 0;
+ /* GDB handled the File-I/O request, and the target is running
+ again. Keep waiting for events. */
+ rs->waiting_for_stop_reply = 1;
break;
case 'N': case 'T': case 'S': case 'X': case 'W':
{
int ch;
int tcount = 0;
char *p;
- char *message;
/* Catch cases like trying to read memory or listing threads while
we're waiting for a stop reply. The remote server wouldn't be
long *sizeof_buf,
int forever)
{
- int timed_out;
-
- timed_out = getpkt_sane (buf, sizeof_buf, forever);
+ getpkt_sane (buf, sizeof_buf, forever);
}
{
struct agent_expr *aexpr = NULL;
int i, ix;
- char *pkt;
- char *buf_start = buf;
if (VEC_empty (agent_expr_p, bp_tgt->conditions))
return 0;
struct remote_state *rs;
char *p, *endbuf;
int bpsize;
- struct condition_list *cond = NULL;
/* Make sure the remote is pointing at the right process, if
necessary. */
static int
remote_supports_stopped_by_sw_breakpoint (struct target_ops *ops)
{
- struct remote_state *rs = get_remote_state ();
-
return (packet_support (PACKET_swbreak_feature) == PACKET_ENABLE);
}
static int
remote_supports_stopped_by_hw_breakpoint (struct target_ops *ops)
{
- struct remote_state *rs = get_remote_state ();
-
return (packet_support (PACKET_hwbreak_feature) == PACKET_ENABLE);
}
/* Only handle flash writes. */
if (writebuf != NULL)
{
- LONGEST xfered;
-
switch (object)
{
case TARGET_OBJECT_FLASH:
enum btrace_read_type type)
{
struct packet_config *packet = &remote_protocol_packets[PACKET_qXfer_btrace];
- struct remote_state *rs = get_remote_state ();
struct cleanup *cleanup;
const char *annex;
char *xml;
remote_ops.to_load = remote_load;
remote_ops.to_mourn_inferior = remote_mourn;
remote_ops.to_pass_signals = remote_pass_signals;
+ remote_ops.to_set_syscall_catchpoint = remote_set_syscall_catchpoint;
remote_ops.to_program_signals = remote_program_signals;
remote_ops.to_thread_alive = remote_thread_alive;
remote_ops.to_thread_name = remote_thread_name;
static void
remote_async_serial_handler (struct serial *scb, void *context)
{
- struct remote_state *rs = (struct remote_state *) context;
-
/* Don't propogate error information up to the client. Instead let
the client find out about the error by querying the target. */
inferior_event_handler (INF_REG_EVENT, NULL);
{
struct remote_state *rs = get_remote_state ();
size_t size = get_remote_packet_size ();
- char *p = rs->buf;
if (packet_support (PACKET_QThreadEvents) == PACKET_DISABLE)
return;
void
_initialize_remote (void)
{
- struct remote_state *rs;
struct cmd_list_element *cmd;
const char *cmd_name;
add_packet_config_cmd (&remote_protocol_packets[PACKET_QPassSignals],
"QPassSignals", "pass-signals", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_QCatchSyscalls],
+ "QCatchSyscalls", "catch-syscalls", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_QProgramSignals],
"QProgramSignals", "program-signals", 0);