enum target_signal siggnal);
static void remote_async_resume (ptid_t ptid, int step,
enum target_signal siggnal);
-static int remote_start_remote (PTR);
+static int remote_start_remote (struct ui_out *uiout, void *dummy);
static void remote_open (char *name, int from_tty);
static void remote_async_open (char *name, int from_tty);
static void extended_remote_open (char *name, int from_tty);
static void extended_remote_async_open (char *name, int from_tty);
-static void remote_open_1 (char *, int, struct target_ops *, int extended_p);
-static void remote_async_open_1 (char *, int, struct target_ops *,
- int extended_p);
+static void remote_open_1 (char *, int, struct target_ops *, int extended_p,
+ int async_p);
static void remote_close (int quitting);
static void update_packet_config (struct packet_config *config);
-/* Define the target subroutine names */
-
-void open_remote_target (char *, int, struct target_ops *, int);
-
void _initialize_remote (void);
-/* Description of the remote protocol. Strictly speeking, when the
+/* Description of the remote protocol. Strictly speaking, when the
target is open()ed, remote.c should create a per-target description
of the remote protocol using that target's architecture.
Unfortunatly, the target stack doesn't include local state. For
long remote_packet_size;
};
+
/* Handle for retreving the remote protocol data from gdbarch. */
static struct gdbarch_data *remote_gdbarch_data_handle;
static struct remote_state *
-get_remote_state ()
+get_remote_state (void)
{
- return gdbarch_data (remote_gdbarch_data_handle);
+ return gdbarch_data (current_gdbarch, remote_gdbarch_data_handle);
}
static void *
return NULL;
}
-/* */
+/* FIXME: graces/2002-08-08: These variables should eventually be
+ bound to an instance of the target object (as in gdbarch-tdep()),
+ when such a thing exists. */
+
+/* This is set to the data address of the access causing the target
+ to stop for a watchpoint. */
+static CORE_ADDR remote_watch_data_address;
+
+/* This is non-zero if taregt stopped for a watchpoint. */
+static int remote_stopped_by_watchpoint_p;
+
static struct target_ops remote_ops;
{
char *name;
char *title;
- enum cmd_auto_boolean detect;
+ enum auto_boolean detect;
enum packet_support support;
};
{
switch (config->detect)
{
- case CMD_AUTO_BOOLEAN_TRUE:
+ case AUTO_BOOLEAN_TRUE:
config->support = PACKET_ENABLE;
break;
- case CMD_AUTO_BOOLEAN_FALSE:
+ case AUTO_BOOLEAN_FALSE:
config->support = PACKET_DISABLE;
break;
- case CMD_AUTO_BOOLEAN_AUTO:
+ case AUTO_BOOLEAN_AUTO:
config->support = PACKET_SUPPORT_UNKNOWN;
break;
}
}
switch (config->detect)
{
- case CMD_AUTO_BOOLEAN_AUTO:
+ case AUTO_BOOLEAN_AUTO:
printf_filtered ("Support for remote protocol `%s' (%s) packet is auto-detected, currently %s.\n",
config->name, config->title, support);
break;
- case CMD_AUTO_BOOLEAN_TRUE:
- case CMD_AUTO_BOOLEAN_FALSE:
+ case AUTO_BOOLEAN_TRUE:
+ case AUTO_BOOLEAN_FALSE:
printf_filtered ("Support for remote protocol `%s' (%s) packet is currently %s.\n",
config->name, config->title, support);
break;
add_packet_config_cmd (struct packet_config *config,
char *name,
char *title,
- void (*set_func) (char *args, int from_tty,
- struct cmd_list_element *
- c),
- void (*show_func) (char *name,
- int from_tty),
+ cmd_sfunc_ftype *set_func,
+ cmd_sfunc_ftype *show_func,
struct cmd_list_element **set_remote_list,
struct cmd_list_element **show_remote_list,
int legacy)
char *cmd_name;
config->name = name;
config->title = title;
- config->detect = CMD_AUTO_BOOLEAN_AUTO;
+ config->detect = AUTO_BOOLEAN_AUTO;
config->support = PACKET_SUPPORT_UNKNOWN;
xasprintf (&set_doc, "Set use of remote protocol `%s' (%s) packet",
name, title);
name, title);
/* set/show TITLE-packet {auto,on,off} */
xasprintf (&cmd_name, "%s-packet", title);
- set_cmd = add_set_auto_boolean_cmd (cmd_name, class_obscure,
- &config->detect, set_doc,
- set_remote_list);
- set_cmd->function.sfunc = set_func;
- show_cmd = add_cmd (cmd_name, class_obscure, show_func, show_doc,
- show_remote_list);
+ add_setshow_auto_boolean_cmd (cmd_name, class_obscure,
+ &config->detect, set_doc, show_doc,
+ set_func, show_func,
+ set_remote_list, show_remote_list);
/* set/show remote NAME-packet {auto,on,off} -- legacy */
if (legacy)
{
switch (config->support)
{
case PACKET_ENABLE:
- if (config->detect == CMD_AUTO_BOOLEAN_AUTO)
+ if (config->detect == AUTO_BOOLEAN_AUTO)
/* If the stub previously indicated that the packet was
supported then there is a protocol error.. */
error ("Protocol error: %s (%s) conflicting enabled responses.",
}
static void
-show_remote_protocol_qSymbol_packet_cmd (char *args, int from_tty)
+show_remote_protocol_qSymbol_packet_cmd (char *args, int from_tty,
+ struct cmd_list_element *c)
{
show_packet_config_cmd (&remote_protocol_qSymbol);
}
}
static void
-show_remote_protocol_e_packet_cmd (char *args, int from_tty)
+show_remote_protocol_e_packet_cmd (char *args, int from_tty,
+ struct cmd_list_element *c)
{
show_packet_config_cmd (&remote_protocol_e);
}
}
static void
-show_remote_protocol_E_packet_cmd (char *args, int from_tty)
+show_remote_protocol_E_packet_cmd (char *args, int from_tty,
+ struct cmd_list_element *c)
{
show_packet_config_cmd (&remote_protocol_E);
}
}
static void
-show_remote_protocol_P_packet_cmd (char *args, int from_tty)
+show_remote_protocol_P_packet_cmd (char *args, int from_tty,
+ struct cmd_list_element *c)
{
show_packet_config_cmd (&remote_protocol_P);
}
}
static void
-show_remote_protocol_Z_software_bp_packet_cmd (char *args, int from_tty)
+show_remote_protocol_Z_software_bp_packet_cmd (char *args, int from_tty,
+ struct cmd_list_element *c)
{
show_packet_config_cmd (&remote_protocol_Z[Z_PACKET_SOFTWARE_BP]);
}
}
static void
-show_remote_protocol_Z_hardware_bp_packet_cmd (char *args, int from_tty)
+show_remote_protocol_Z_hardware_bp_packet_cmd (char *args, int from_tty,
+ struct cmd_list_element *c)
{
show_packet_config_cmd (&remote_protocol_Z[Z_PACKET_HARDWARE_BP]);
}
}
static void
-show_remote_protocol_Z_write_wp_packet_cmd (char *args, int from_tty)
+show_remote_protocol_Z_write_wp_packet_cmd (char *args, int from_tty,
+ struct cmd_list_element *c)
{
show_packet_config_cmd (&remote_protocol_Z[Z_PACKET_WRITE_WP]);
}
}
static void
-show_remote_protocol_Z_read_wp_packet_cmd (char *args, int from_tty)
+show_remote_protocol_Z_read_wp_packet_cmd (char *args, int from_tty,
+ struct cmd_list_element *c)
{
show_packet_config_cmd (&remote_protocol_Z[Z_PACKET_READ_WP]);
}
}
static void
-show_remote_protocol_Z_access_wp_packet_cmd (char *args, int from_tty)
+show_remote_protocol_Z_access_wp_packet_cmd (char *args, int from_tty,
+ struct cmd_list_element *c)
{
show_packet_config_cmd (&remote_protocol_Z[Z_PACKET_ACCESS_WP]);
}
/* For compatibility with older distributions. Provide a ``set remote
Z-packet ...'' command that updates all the Z packet types. */
-static enum cmd_auto_boolean remote_Z_packet_detect;
+static enum auto_boolean remote_Z_packet_detect;
static void
set_remote_protocol_Z_packet_cmd (char *args, int from_tty,
}
static void
-show_remote_protocol_Z_packet_cmd (char *args, int from_tty)
+show_remote_protocol_Z_packet_cmd (char *args, int from_tty,
+ struct cmd_list_element *c)
{
int i;
for (i = 0; i < NR_Z_PACKET_TYPES; i++)
}
static void
-show_remote_protocol_binary_download_cmd (char *args,
- int from_tty)
+show_remote_protocol_binary_download_cmd (char *args, int from_tty,
+ struct cmd_list_element *c)
{
show_packet_config_cmd (&remote_protocol_binary_download);
}
/* Tokens for use by the asynchronous signal handlers for SIGINT */
-PTR sigint_remote_twice_token;
-PTR sigint_remote_token;
+static void *sigint_remote_twice_token;
+static void *sigint_remote_token;
/* These are pointers to hook functions that may be set in order to
modify resume/wait behavior for a particular architecture. */
#define BUF_THREAD_ID_SIZE (OPAQUETHREADBYTES*2)
-char *unpack_varlen_hex (char *buff, int *result);
+char *unpack_varlen_hex (char *buff, ULONGEST *result);
static char *unpack_nibble (char *buf, int *val);
char *
unpack_varlen_hex (char *buff, /* packet to parse */
- int *result)
+ ULONGEST *result)
{
int nibble;
int retval = 0;
/* Stub for catch_errors. */
static int
-remote_start_remote_dummy (void *dummy)
+remote_start_remote_dummy (struct ui_out *uiout, void *dummy)
{
start_remote (); /* Initialize gdb process mechanisms */
+ /* NOTE: Return something >=0. A -ve value is reserved for
+ catch_exceptions. */
return 1;
}
static int
-remote_start_remote (PTR dummy)
+remote_start_remote (struct ui_out *uiout, void *dummy)
{
immediate_quit++; /* Allow user to interrupt it */
putpkt ("?"); /* initiate a query from remote machine */
immediate_quit--;
- return remote_start_remote_dummy (dummy);
+ /* NOTE: See comment above in remote_start_remote_dummy(). This
+ function returns something >=0. */
+ return remote_start_remote_dummy (uiout, dummy);
}
/* Open a connection to a remote debugger.
static void
remote_open (char *name, int from_tty)
{
- remote_open_1 (name, from_tty, &remote_ops, 0);
+ remote_open_1 (name, from_tty, &remote_ops, 0, 0);
}
/* Just like remote_open, but with asynchronous support. */
static void
remote_async_open (char *name, int from_tty)
{
- remote_async_open_1 (name, from_tty, &remote_async_ops, 0);
+ remote_open_1 (name, from_tty, &remote_async_ops, 0, 1);
}
/* Open a connection to a remote debugger using the extended
static void
extended_remote_open (char *name, int from_tty)
{
- remote_open_1 (name, from_tty, &extended_remote_ops, 1 /*extended_p */ );
+ remote_open_1 (name, from_tty, &extended_remote_ops, 1 /*extended_p */,
+ 0 /* async_p */);
}
/* Just like extended_remote_open, but with asynchronous support. */
static void
extended_remote_async_open (char *name, int from_tty)
{
- remote_async_open_1 (name, from_tty, &extended_async_remote_ops, 1 /*extended_p */ );
+ remote_open_1 (name, from_tty, &extended_async_remote_ops,
+ 1 /*extended_p */, 1 /* async_p */);
}
/* Generic code for opening a connection to a remote target. */
}
}
-static void
-remote_open_1 (char *name, int from_tty, struct target_ops *target,
- int extended_p)
+static struct serial *
+remote_serial_open (char *name)
{
- struct remote_state *rs = get_remote_state ();
- if (name == 0)
- error ("To open a remote debug connection, you need to specify what\n"
- "serial device is attached to the remote system\n"
- "(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.).");
-
- /* See FIXME above */
- wait_forever_enabled_p = 1;
+ static int udp_warning = 0;
- target_preopen (from_tty);
-
- unpush_target (target);
-
- remote_desc = serial_open (name);
- if (!remote_desc)
- perror_with_name (name);
-
- if (baud_rate != -1)
+ /* FIXME: Parsing NAME here is a hack. But we want to warn here instead
+ of in ser-tcp.c, because it is the remote protocol assuming that the
+ serial connection is reliable and not the serial connection promising
+ to be. */
+ if (!udp_warning && strncmp (name, "udp:", 4) == 0)
{
- if (serial_setbaudrate (remote_desc, baud_rate))
- {
- serial_close (remote_desc);
- perror_with_name (name);
- }
- }
-
- serial_raw (remote_desc);
-
- /* If there is something sitting in the buffer we might take it as a
- response to a command, which would be bad. */
- serial_flush_input (remote_desc);
-
- if (from_tty)
- {
- puts_filtered ("Remote debugging using ");
- puts_filtered (name);
- puts_filtered ("\n");
+ warning ("The remote protocol may be unreliable over UDP.");
+ warning ("Some events may be lost, rendering further debugging "
+ "impossible.");
+ udp_warning = 1;
}
- push_target (target); /* Switch to using remote target now */
-
- init_all_packet_configs ();
-
- general_thread = -2;
- continue_thread = -2;
-
- /* Probe for ability to use "ThreadInfo" query, as required. */
- use_threadinfo_query = 1;
- use_threadextra_query = 1;
-
- /* Without this, some commands which require an active target (such
- as kill) won't work. This variable serves (at least) double duty
- as both the pid of the target process (if it has such), and as a
- flag indicating that a target is active. These functions should
- be split out into seperate variables, especially since GDB will
- someday have a notion of debugging several processes. */
-
- inferior_ptid = pid_to_ptid (MAGIC_NULL_PID);
-#ifdef SOLIB_CREATE_INFERIOR_HOOK
- /* First delete any symbols previously loaded from shared libraries. */
- no_shared_libraries (NULL, 0);
-#endif
-
- /* Start the remote connection; if error (0), discard this target.
- In particular, if the user quits, be sure to discard it
- (we'd be in an inconsistent state otherwise). */
- if (!catch_errors (remote_start_remote, NULL,
- "Couldn't establish connection to remote target\n",
- RETURN_MASK_ALL))
- {
- pop_target ();
- return;
- }
-
- if (extended_p)
- {
- /* Tell the remote that we are using the extended protocol. */
- char *buf = alloca (rs->remote_packet_size);
- putpkt ("!");
- getpkt (buf, (rs->remote_packet_size), 0);
- }
-#ifdef SOLIB_CREATE_INFERIOR_HOOK
- /* FIXME: need a master target_open vector from which all
- remote_opens can be called, so that stuff like this can
- go there. Failing that, the following code must be copied
- to the open function for any remote target that wants to
- support svr4 shared libraries. */
- /* Set up to detect and load shared libraries. */
- if (exec_bfd) /* No use without an exec file. */
- {
- SOLIB_CREATE_INFERIOR_HOOK (PIDGET (inferior_ptid));
- remote_check_symbols (symfile_objfile);
- }
-#endif
+ return serial_open (name);
}
-/* Just like remote_open but with asynchronous support. */
static void
-remote_async_open_1 (char *name, int from_tty, struct target_ops *target,
- int extended_p)
+remote_open_1 (char *name, int from_tty, struct target_ops *target,
+ int extended_p, int async_p)
{
+ int ex;
struct remote_state *rs = get_remote_state ();
if (name == 0)
error ("To open a remote debug connection, you need to specify what\n"
"serial device is attached to the remote system\n"
"(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.).");
+ /* See FIXME above */
+ if (!async_p)
+ wait_forever_enabled_p = 1;
+
target_preopen (from_tty);
unpush_target (target);
- remote_desc = serial_open (name);
+ remote_desc = remote_serial_open (name);
if (!remote_desc)
perror_with_name (name);
puts_filtered (name);
puts_filtered ("\n");
}
-
push_target (target); /* Switch to using remote target now */
init_all_packet_configs ();
-
+
general_thread = -2;
continue_thread = -2;
flag indicating that a target is active. These functions should
be split out into seperate variables, especially since GDB will
someday have a notion of debugging several processes. */
- inferior_ptid = pid_to_ptid (MAGIC_NULL_PID);
- /* With this target we start out by owning the terminal. */
- remote_async_terminal_ours_p = 1;
+ inferior_ptid = pid_to_ptid (MAGIC_NULL_PID);
- /* FIXME: cagney/1999-09-23: During the initial connection it is
- assumed that the target is already ready and able to respond to
- requests. Unfortunately remote_start_remote() eventually calls
- wait_for_inferior() with no timeout. wait_forever_enabled_p gets
- around this. Eventually a mechanism that allows
- wait_for_inferior() to expect/get timeouts will be
- implemented. */
- wait_forever_enabled_p = 0;
+ if (async_p)
+ {
+ /* With this target we start out by owning the terminal. */
+ remote_async_terminal_ours_p = 1;
+
+ /* FIXME: cagney/1999-09-23: During the initial connection it is
+ assumed that the target is already ready and able to respond to
+ requests. Unfortunately remote_start_remote() eventually calls
+ wait_for_inferior() with no timeout. wait_forever_enabled_p gets
+ around this. Eventually a mechanism that allows
+ wait_for_inferior() to expect/get timeouts will be
+ implemented. */
+ wait_forever_enabled_p = 0;
+ }
#ifdef SOLIB_CREATE_INFERIOR_HOOK
/* First delete any symbols previously loaded from shared libraries. */
no_shared_libraries (NULL, 0);
#endif
- /* Start the remote connection; if error (0), discard this target.
- In particular, if the user quits, be sure to discard it
- (we'd be in an inconsistent state otherwise). */
- if (!catch_errors (remote_start_remote, NULL,
- "Couldn't establish connection to remote target\n",
- RETURN_MASK_ALL))
+ /* Start the remote connection. If error() or QUIT, discard this
+ target (we'd otherwise be in an inconsistent state) and then
+ propogate the error on up the exception chain. This ensures that
+ the caller doesn't stumble along blindly assuming that the
+ function succeeded. The CLI doesn't have this problem but other
+ UI's, such as MI do.
+
+ FIXME: cagney/2002-05-19: Instead of re-throwing the exception,
+ this function should return an error indication letting the
+ caller restore the previous state. Unfortunatly the command
+ ``target remote'' is directly wired to this function making that
+ impossible. On a positive note, the CLI side of this problem has
+ been fixed - the function set_cmd_context() makes it possible for
+ all the ``target ....'' commands to share a common callback
+ function. See cli-dump.c. */
+ ex = catch_exceptions (uiout,
+ remote_start_remote, NULL,
+ "Couldn't establish connection to remote"
+ " target\n",
+ RETURN_MASK_ALL);
+ if (ex < 0)
{
pop_target ();
- wait_forever_enabled_p = 1;
- return;
+ if (async_p)
+ wait_forever_enabled_p = 1;
+ throw_exception (ex);
}
- wait_forever_enabled_p = 1;
+ if (async_p)
+ wait_forever_enabled_p = 1;
if (extended_p)
{
Give up (and stop debugging it)? "))
{
target_mourn_inferior ();
- return_to_top_level (RETURN_QUIT);
+ throw_exception (RETURN_QUIT);
}
target_terminal_inferior ();
{
struct remote_state *rs = get_remote_state ();
unsigned char *buf = alloca (rs->remote_packet_size);
- int thread_num = -1;
+ ULONGEST thread_num = -1;
+ ULONGEST addr;
status->kind = TARGET_WAITKIND_EXITED;
status->value.integer = 0;
if (target_wait_loop_hook)
(*target_wait_loop_hook) ();
+ remote_stopped_by_watchpoint_p = 0;
+
switch (buf[0])
{
case 'E': /* Error of some sort */
unsigned char *p1;
char *p_temp;
int fieldsize;
+ LONGEST pnum = 0;
- /* Read the ``P'' register number. */
- LONGEST pnum = strtol ((const char *) p, &p_temp, 16);
- p1 = (unsigned char *) p_temp;
+ /* If the packet contains a register number save it in pnum
+ and set p1 to point to the character following it.
+ Otherwise p1 points to p. */
+
+ /* If this packet is an awatch packet, don't parse the 'a'
+ as a register number. */
+
+ if (strncmp (p, "awatch", strlen("awatch")) != 0)
+ {
+ /* Read the ``P'' register number. */
+ pnum = strtol (p, &p_temp, 16);
+ p1 = (unsigned char *) p_temp;
+ }
+ else
+ p1 = p;
if (p1 == p) /* No register number present here */
{
- p1 = (unsigned char *) strchr ((const char *) p, ':');
+ p1 = (unsigned char *) strchr (p, ':');
if (p1 == NULL)
warning ("Malformed packet(a) (missing colon): %s\n\
Packet: '%s'\n",
p, buf);
- if (strncmp ((const char *) p, "thread", p1 - p) == 0)
+ if (strncmp (p, "thread", p1 - p) == 0)
{
p_temp = unpack_varlen_hex (++p1, &thread_num);
record_currthread (thread_num);
p = (unsigned char *) p_temp;
}
+ else if ((strncmp (p, "watch", p1 - p) == 0)
+ || (strncmp (p, "rwatch", p1 - p) == 0)
+ || (strncmp (p, "awatch", p1 - p) == 0))
+ {
+ remote_stopped_by_watchpoint_p = 1;
+ p = unpack_varlen_hex (++p1, &addr);
+ remote_watch_data_address = (CORE_ADDR)addr;
+ }
+ else
+ {
+ /* Silently skip unknown optional info. */
+ p_temp = strchr (p1 + 1, ';');
+ if (p_temp)
+ p = (unsigned char *) p_temp;
+ }
}
else
{
{
struct remote_state *rs = get_remote_state ();
unsigned char *buf = alloca (rs->remote_packet_size);
- int thread_num = -1;
+ ULONGEST thread_num = -1;
+ ULONGEST addr;
status->kind = TARGET_WAITKIND_EXITED;
status->value.integer = 0;
+ remote_stopped_by_watchpoint_p = 0;
+
while (1)
{
unsigned char *p;
unsigned char *p1;
char *p_temp;
int fieldsize;
+ long pnum = 0;
- /* Read the register number */
- long pnum = strtol ((const char *) p, &p_temp, 16);
- p1 = (unsigned char *) p_temp;
+ /* If the packet contains a register number, save it in pnum
+ and set p1 to point to the character following it.
+ Otherwise p1 points to p. */
+
+ /* If this packet is an awatch packet, don't parse the 'a'
+ as a register number. */
+
+ if (!strncmp (p, "awatch", strlen ("awatch")) != 0)
+ {
+ /* Read the register number. */
+ pnum = strtol (p, &p_temp, 16);
+ p1 = (unsigned char *) p_temp;
+ }
+ else
+ p1 = p;
if (p1 == p) /* No register number present here */
{
- p1 = (unsigned char *) strchr ((const char *) p, ':');
+ p1 = (unsigned char *) strchr (p, ':');
if (p1 == NULL)
warning ("Malformed packet(a) (missing colon): %s\n\
Packet: '%s'\n",
p, buf);
- if (strncmp ((const char *) p, "thread", p1 - p) == 0)
+ if (strncmp (p, "thread", p1 - p) == 0)
{
p_temp = unpack_varlen_hex (++p1, &thread_num);
record_currthread (thread_num);
p = (unsigned char *) p_temp;
}
+ else if ((strncmp (p, "watch", p1 - p) == 0)
+ || (strncmp (p, "rwatch", p1 - p) == 0)
+ || (strncmp (p, "awatch", p1 - p) == 0))
+ {
+ remote_stopped_by_watchpoint_p = 1;
+ p = unpack_varlen_hex (++p1, &addr);
+ remote_watch_data_address = (CORE_ADDR)addr;
+ }
+ else
+ {
+ /* Silently skip unknown optional info. */
+ p_temp = (unsigned char *) strchr (p1 + 1, ';');
+ if (p_temp)
+ p = p_temp;
+ }
}
+
else
{
struct packet_reg *reg = packet_reg_from_pnum (rs, pnum);
/* NOTE: This isn't rs->sizeof_g_packet because here, we are
forcing the register cache to read its and not the target
registers. */
- read_register_bytes (0, (char *) NULL, REGISTER_BYTES); /* OK use. */
+ deprecated_read_register_bytes (0, (char *) NULL,
+ REGISTER_BYTES); /* OK use. */
break;
case PACKET_ENABLE:
break;
putpkt (buf);
getpkt (buf, sizeof_buf, 0);
- if (buf[0] == 'E')
+ if (buf[0] == 'E'
+ && isxdigit (buf[1]) && isxdigit (buf[2])
+ && buf[3] == '\0')
{
/* There is no correspondance between what the remote protocol uses
for errors and errno codes. We would like a cleaner way of
}
}
-/* FIXME: This function should be static and a member of the remote
- target vector. */
-
-int
+static int
remote_insert_watchpoint (CORE_ADDR addr, int len, int type)
{
struct remote_state *rs = get_remote_state ();
"remote_insert_watchpoint: reached end of function");
}
-/* FIXME: This function should be static and a member of the remote
- target vector. */
-int
+static int
remote_remove_watchpoint (CORE_ADDR addr, int len, int type)
{
struct remote_state *rs = get_remote_state ();
"remote_remove_watchpoint: reached end of function");
}
-/* FIXME: This function should be static and a member of the remote
- target vector. */
+
+int remote_hw_watchpoint_limit = -1;
+int remote_hw_breakpoint_limit = -1;
+
+int
+remote_check_watch_resources (int type, int cnt, int ot)
+{
+ if (type == bp_hardware_breakpoint)
+ {
+ if (remote_hw_breakpoint_limit == 0)
+ return 0;
+ else if (remote_hw_breakpoint_limit < 0)
+ return 1;
+ else if (cnt <= remote_hw_breakpoint_limit)
+ return 1;
+ }
+ else
+ {
+ if (remote_hw_watchpoint_limit == 0)
+ return 0;
+ else if (remote_hw_watchpoint_limit < 0)
+ return 1;
+ else if (ot)
+ return -1;
+ else if (cnt <= remote_hw_watchpoint_limit)
+ return 1;
+ }
+ return -1;
+}
int
-remote_insert_hw_breakpoint (CORE_ADDR addr, int len)
+remote_stopped_by_watchpoint (void)
{
+ return remote_stopped_by_watchpoint_p;
+}
+
+CORE_ADDR
+remote_stopped_data_address (void)
+{
+ if (remote_stopped_by_watchpoint ())
+ return remote_watch_data_address;
+ return (CORE_ADDR)0;
+}
+
+
+static int
+remote_insert_hw_breakpoint (CORE_ADDR addr, char *shadow)
+{
+ int len = 0;
struct remote_state *rs = get_remote_state ();
char *buf = alloca (rs->remote_packet_size);
char *p = buf;
+ /* The length field should be set to the size of a breakpoint
+ instruction. */
+
+ BREAKPOINT_FROM_PC (&addr, &len);
+
if (remote_protocol_Z[Z_PACKET_HARDWARE_BP].support == PACKET_DISABLE)
error ("Can't set hardware breakpoint without the '%s' (%s) packet\n",
remote_protocol_Z[Z_PACKET_HARDWARE_BP].name,
return 0;
}
internal_error (__FILE__, __LINE__,
- "remote_remove_watchpoint: reached end of function");
+ "remote_insert_hw_breakpoint: reached end of function");
}
-/* FIXME: This function should be static and a member of the remote
- target vector. */
-int
-remote_remove_hw_breakpoint (CORE_ADDR addr, int len)
+static int
+remote_remove_hw_breakpoint (CORE_ADDR addr, char *shadow)
{
+ int len;
struct remote_state *rs = get_remote_state ();
char *buf = alloca (rs->remote_packet_size);
char *p = buf;
-
+
+ /* The length field should be set to the size of a breakpoint
+ instruction. */
+
+ BREAKPOINT_FROM_PC (&addr, &len);
+
if (remote_protocol_Z[Z_PACKET_HARDWARE_BP].support == PACKET_DISABLE)
error ("Can't clear hardware breakpoint without the '%s' (%s) packet\n",
remote_protocol_Z[Z_PACKET_HARDWARE_BP].name,
return 0;
}
internal_error (__FILE__, __LINE__,
- "remote_remove_watchpoint: reached end of function");
+ "remote_remove_hw_breakpoint: reached end of function");
}
/* Some targets are only capable of doing downloads, and afterwards
remote_open (name, from_tty);
}
-/* Other targets want to use the entire remote serial module but with
- certain remote_ops overridden. */
-
-void
-open_remote_target (char *name, int from_tty, struct target_ops *target,
- int extended_p)
-{
- printf_filtered ("Selecting the %sremote protocol\n",
- (extended_p ? "extended-" : ""));
- remote_open_1 (name, from_tty, target, extended_p);
-}
-
/* Table used by the crc32 function to calcuate the checksum. */
static unsigned long crc32_table[256] =
getpkt (buf, (rs->remote_packet_size), 0);
if (buf[0] == 'E')
- error ("target memory fault, section %s, range 0x%08x -- 0x%08x",
- sectname, lma, lma + size);
+ error ("target memory fault, section %s, range 0x%s -- 0x%s",
+ sectname, paddr (lma), paddr (lma + size));
if (buf[0] != 'C')
error ("remote target does not support this operation");
remote_ops.to_files_info = remote_files_info;
remote_ops.to_insert_breakpoint = remote_insert_breakpoint;
remote_ops.to_remove_breakpoint = remote_remove_breakpoint;
+ remote_ops.to_stopped_by_watchpoint = remote_stopped_by_watchpoint;
+ remote_ops.to_stopped_data_address = remote_stopped_data_address;
+ remote_ops.to_can_use_hw_breakpoint = remote_check_watch_resources;
+ remote_ops.to_insert_hw_breakpoint = remote_insert_hw_breakpoint;
+ remote_ops.to_remove_hw_breakpoint = remote_remove_hw_breakpoint;
+ remote_ops.to_insert_watchpoint = remote_insert_watchpoint;
+ remote_ops.to_remove_watchpoint = remote_remove_watchpoint;
remote_ops.to_kill = remote_kill;
remote_ops.to_load = generic_load;
remote_ops.to_mourn_inferior = remote_mourn;
static void
remote_cisco_open (char *name, int from_tty)
{
+ int ex;
if (name == 0)
error ("To open a remote debug connection, you need to specify what \n"
"device is attached to the remote system (e.g. host:port).");
unpush_target (&remote_cisco_ops);
- remote_desc = serial_open (name);
+ remote_desc = remote_serial_open (name);
if (!remote_desc)
perror_with_name (name);
someday have a notion of debugging several processes. */
inferior_ptid = pid_to_ptid (MAGIC_NULL_PID);
- /* Start the remote connection; if error (0), discard this target. */
-
- if (!catch_errors (remote_start_remote_dummy, (char *) 0,
- "Couldn't establish connection to remote target\n",
- RETURN_MASK_ALL))
+ /* Start the remote connection; if error, discard this target. See
+ the comments in remote_open_1() for further details such as the
+ need to re-throw the exception. */
+ ex = catch_exceptions (uiout,
+ remote_start_remote_dummy, NULL,
+ "Couldn't establish connection to remote"
+ " target\n",
+ RETURN_MASK_ALL);
+ if (ex < 0)
{
pop_target ();
- return;
+ throw_exception (ex);
}
}
if (query ("Interrupt GDB? "))
{
printf_filtered ("Interrupted by user.\n");
- return_to_top_level (RETURN_QUIT);
+ throw_exception (RETURN_QUIT);
}
quit_count = 0;
}
remote_cisco_ops.to_xfer_memory = remote_xfer_memory;
remote_cisco_ops.to_files_info = remote_files_info;
remote_cisco_ops.to_insert_breakpoint = remote_insert_breakpoint;
- remote_cisco_ops.to_remove_breakpoint = remote_remove_breakpoint;
+ remote_cisco_ops.to_remove_breakpoint = remote_remove_breakpoint;
+ remote_cisco_ops.to_remove_hw_breakpoint = remote_remove_hw_breakpoint;
+ remote_cisco_ops.to_insert_hw_breakpoint = remote_insert_hw_breakpoint;
+ remote_cisco_ops.to_insert_watchpoint = remote_insert_watchpoint;
+ remote_cisco_ops.to_remove_watchpoint = remote_remove_watchpoint;
+ remote_cisco_ops.to_stopped_by_watchpoint = remote_stopped_by_watchpoint;
+ remote_cisco_ops.to_stopped_data_address = remote_stopped_data_address;
+ remote_cisco_ops.to_can_use_hw_breakpoint = remote_check_watch_resources;
remote_cisco_ops.to_kill = remote_kill;
remote_cisco_ops.to_load = generic_load;
remote_cisco_ops.to_mourn_inferior = remote_cisco_mourn;
remote_async_ops.to_files_info = remote_files_info;
remote_async_ops.to_insert_breakpoint = remote_insert_breakpoint;
remote_async_ops.to_remove_breakpoint = remote_remove_breakpoint;
+ remote_async_ops.to_can_use_hw_breakpoint = remote_check_watch_resources;
+ remote_async_ops.to_insert_hw_breakpoint = remote_insert_hw_breakpoint;
+ remote_async_ops.to_remove_hw_breakpoint = remote_remove_hw_breakpoint;
+ remote_async_ops.to_insert_watchpoint = remote_insert_watchpoint;
+ remote_async_ops.to_remove_watchpoint = remote_remove_watchpoint;
+ remote_async_ops.to_stopped_by_watchpoint = remote_stopped_by_watchpoint;
+ remote_async_ops.to_stopped_data_address = remote_stopped_data_address;
remote_async_ops.to_terminal_inferior = remote_async_terminal_inferior;
remote_async_ops.to_terminal_ours = remote_async_terminal_ours;
remote_async_ops.to_kill = remote_async_kill;
static void
show_remote_cmd (char *args, int from_tty)
{
-
- show_remote_protocol_Z_packet_cmd (args, from_tty);
- show_remote_protocol_e_packet_cmd (args, from_tty);
- show_remote_protocol_E_packet_cmd (args, from_tty);
- show_remote_protocol_P_packet_cmd (args, from_tty);
- show_remote_protocol_qSymbol_packet_cmd (args, from_tty);
- show_remote_protocol_binary_download_cmd (args, from_tty);
+ /* FIXME: cagney/2002-06-15: This function should iterate over
+ remote_show_cmdlist for a list of sub commands to show. */
+ show_remote_protocol_Z_packet_cmd (args, from_tty, NULL);
+ show_remote_protocol_e_packet_cmd (args, from_tty, NULL);
+ show_remote_protocol_E_packet_cmd (args, from_tty, NULL);
+ show_remote_protocol_P_packet_cmd (args, from_tty, NULL);
+ show_remote_protocol_qSymbol_packet_cmd (args, from_tty, NULL);
+ show_remote_protocol_binary_download_cmd (args, from_tty, NULL);
}
static void
terminating `#' character and checksum.",
&maintenancelist);
- add_show_from_set
- (add_set_boolean_cmd ("remotebreak", no_class, &remote_break,
- "Set whether to send break if interrupted.\n",
- &setlist),
- &showlist);
+ add_setshow_boolean_cmd ("remotebreak", no_class, &remote_break,
+ "Set whether to send break if interrupted.\n",
+ "Show whether to send break if interrupted.\n",
+ NULL, NULL,
+ &setlist, &showlist);
/* Install commands for configuring memory read/write packets. */
"Show the maximum number of bytes per memory-read packet.\n",
&remote_show_cmdlist);
+ add_setshow_cmd ("hardware-watchpoint-limit", no_class,
+ var_zinteger, &remote_hw_watchpoint_limit, "\
+Set the maximum number of target hardware watchpoints.\n\
+Specify a negative limit for unlimited.", "\
+Show the maximum number of target hardware watchpoints.\n",
+ NULL, NULL, &remote_set_cmdlist, &remote_show_cmdlist);
+ add_setshow_cmd ("hardware-breakpoint-limit", no_class,
+ var_zinteger, &remote_hw_breakpoint_limit, "\
+Set the maximum number of target hardware breakpoints.\n\
+Specify a negative limit for unlimited.", "\
+Show the maximum number of target hardware breakpoints.\n",
+ NULL, NULL, &remote_set_cmdlist, &remote_show_cmdlist);
+
add_show_from_set
(add_set_cmd ("remoteaddresssize", class_obscure,
var_integer, (char *) &remote_address_size,
show_remote_protocol_e_packet_cmd,
&remote_set_cmdlist, &remote_show_cmdlist,
0);
+ /* Disable by default. The ``e'' packet has nasty interactions with
+ the threading code - it relies on global state. */
+ remote_protocol_e.detect = AUTO_BOOLEAN_FALSE;
+ update_packet_config (&remote_protocol_e);
add_packet_config_cmd (&remote_protocol_E,
"E", "step-over-range-w-signal",
show_remote_protocol_E_packet_cmd,
&remote_set_cmdlist, &remote_show_cmdlist,
0);
+ /* Disable by default. The ``e'' packet has nasty interactions with
+ the threading code - it relies on global state. */
+ remote_protocol_E.detect = AUTO_BOOLEAN_FALSE;
+ update_packet_config (&remote_protocol_E);
add_packet_config_cmd (&remote_protocol_P,
"P", "set-register",
0);
/* Keep the old ``set remote Z-packet ...'' working. */
- tmpcmd = add_set_auto_boolean_cmd ("Z-packet", class_obscure,
- &remote_Z_packet_detect,
- "\
-Set use of remote protocol `Z' packets", &remote_set_cmdlist);
- tmpcmd->function.sfunc = set_remote_protocol_Z_packet_cmd;
- add_cmd ("Z-packet", class_obscure, show_remote_protocol_Z_packet_cmd,
- "Show use of remote protocol `Z' packets ",
- &remote_show_cmdlist);
+ add_setshow_auto_boolean_cmd ("Z-packet", class_obscure,
+ &remote_Z_packet_detect, "\
+Set use of remote protocol `Z' packets",
+ "Show use of remote protocol `Z' packets ",
+ set_remote_protocol_Z_packet_cmd,
+ show_remote_protocol_Z_packet_cmd,
+ &remote_set_cmdlist, &remote_show_cmdlist);
}