#include "tracepoint.h"
#include "ax.h"
#include "ax-gdb.h"
+#include "agent.h"
/* Temp hacks for tracepoint encoding migration. */
static char *target_buf;
static long target_buf_size;
-/*static*/ void
-encode_actions (struct breakpoint *t, struct bp_location *tloc,
- char ***tdp_actions, char ***stepping_actions);
/* The size to align memory write packets, when practical. The protocol
does not guarantee any alignment, and gdb will generate short
static void remote_console_output (char *msg);
+static int remote_supports_cond_breakpoints (void);
+
/* The non-stop remote protocol provisions for one pending stop reply.
This is where we keep it until it is acknowledged. */
char *buf;
long buf_size;
+ /* True if we're going through initial connection setup (finding out
+ about the remote side's threads, relocating symbols, etc.). */
+ int starting_up;
+
/* If we negotiated packet size explicitly (and thus can bypass
heuristics for the largest packet size that will not overflow
a buffer in the stub), this will be set to that packet size.
/* True if the stub reports support for conditional tracepoints. */
int cond_tracepoints;
+ /* True if the stub reports support for target-side breakpoint
+ conditions. */
+ int cond_breakpoints;
+
/* True if the stub reports support for fast tracepoints. */
int fast_tracepoints;
{
adjusted_size = to - org_to;
- sprintf (buf, "qRelocInsn:%x", adjusted_size);
+ xsnprintf (buf, *sizeof_buf, "qRelocInsn:%x", adjusted_size);
putpkt (buf);
}
else if (ex.reason < 0 && ex.error == MEMORY_ERROR)
PACKET_qXfer_threads,
PACKET_qXfer_statictrace_read,
PACKET_qXfer_traceframe_info,
+ PACKET_qXfer_uib,
PACKET_qGetTIBAddr,
PACKET_qGetTLSAddr,
PACKET_qSupported,
PACKET_QPassSignals,
+ PACKET_QProgramSignals,
PACKET_qSearch_memory,
PACKET_vAttach,
PACKET_vRun,
PACKET_qXfer_siginfo_write,
PACKET_qAttached,
PACKET_ConditionalTracepoints,
+ PACKET_ConditionalBreakpoints,
PACKET_FastTracepoints,
PACKET_StaticTracepoints,
PACKET_InstallInTrace,
PACKET_QAllow,
PACKET_qXfer_fdpic,
PACKET_QDisableRandomization,
+ PACKET_QAgent,
PACKET_MAX
};
remote_query_attached (int pid)
{
struct remote_state *rs = get_remote_state ();
+ size_t size = get_remote_packet_size ();
if (remote_protocol_packets[PACKET_qAttached].support == PACKET_DISABLE)
return 0;
if (remote_multi_process_p (rs))
- sprintf (rs->buf, "qAttached:%x", pid);
+ xsnprintf (rs->buf, size, "qAttached:%x", pid);
else
- sprintf (rs->buf, "qAttached");
+ xsnprintf (rs->buf, size, "qAttached");
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
/* Return the private thread data, creating it if necessary. */
-struct private_thread_info *
+static struct private_thread_info *
demand_private_info (ptid_t ptid)
{
struct thread_info *info = find_thread_ptid (ptid);
}
}
+/* The last QProgramSignals packet sent to the target. We bypass
+ sending a new program signals list down to the target if the new
+ packet is exactly the same as the last we sent. IOW, we only let
+ the target know about program signals list changes. */
+
+static char *last_program_signals_packet;
+
+/* If 'QProgramSignals' is supported, tell the remote stub what
+ signals it should pass through to the inferior when detaching. */
+
+static void
+remote_program_signals (int numsigs, unsigned char *signals)
+{
+ if (remote_protocol_packets[PACKET_QProgramSignals].support != PACKET_DISABLE)
+ {
+ char *packet, *p;
+ int count = 0, i;
+
+ gdb_assert (numsigs < 256);
+ for (i = 0; i < numsigs; i++)
+ {
+ if (signals[i])
+ count++;
+ }
+ packet = xmalloc (count * 3 + strlen ("QProgramSignals:") + 1);
+ strcpy (packet, "QProgramSignals:");
+ p = packet + strlen (packet);
+ for (i = 0; i < numsigs; i++)
+ {
+ if (signal_pass_state (i))
+ {
+ if (i >= 16)
+ *p++ = tohex (i >> 4);
+ *p++ = tohex (i & 15);
+ if (count)
+ *p++ = ';';
+ else
+ break;
+ count--;
+ }
+ }
+ *p = 0;
+ if (!last_program_signals_packet
+ || strcmp (last_program_signals_packet, packet) != 0)
+ {
+ struct remote_state *rs = get_remote_state ();
+ char *buf = rs->buf;
+
+ putpkt (packet);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ packet_ok (buf, &remote_protocol_packets[PACKET_QProgramSignals]);
+ xfree (last_program_signals_packet);
+ last_program_signals_packet = packet;
+ }
+ else
+ xfree (packet);
+ }
+}
+
/* If PTID is MAGIC_NULL_PTID, don't set any thread. If PTID is
MINUS_ONE_PTID, set the thread to -1, so the stub returns the
thread. If GEN is set, set the general thread, if not, then set
struct remote_state *rs = get_remote_state ();
char *p = rs->buf;
- sprintf (p, "qTSTMat:");
+ xsnprintf (p, get_remote_packet_size (), "qTSTMat:");
p += strlen (p);
p += hexnumstr (p, addr);
putpkt (rs->buf);
return 0;
}
-static void
-free_current_marker (void *arg)
-{
- struct static_tracepoint_marker **marker_p = arg;
-
- if (*marker_p != NULL)
- {
- release_static_tracepoint_marker (*marker_p);
- xfree (*marker_p);
- }
- else
- *marker_p = NULL;
-}
-
static VEC(static_tracepoint_marker_p) *
remote_static_tracepoint_markers_by_strid (const char *strid)
{
/* Ack any packet which the remote side has already sent. */
serial_write (remote_desc, "+", 1);
+ /* Signal other parts that we're going through the initial setup,
+ and so things may not be stable yet. */
+ rs->starting_up = 1;
+
/* The first packet we send to the target is the optional "supported
packets" request. If the target can answer this, it will tell us
which later probes to skip. */
getpkt (&rs->buf, &rs->buf_size, 0);
}
+ /* Let the target know which signals it is allowed to pass down to
+ the program. */
+ update_signals_program_target ();
+
/* Next, if the target can specify a description, read it. We do
this before anything involving memory or registers. */
target_find_description ();
/* We're connected, but not running. Drop out before we
call start_remote. */
+ rs->starting_up = 0;
return;
}
else
/* We're connected, but not running. Drop out before we
call start_remote. */
+ rs->starting_up = 0;
return;
}
merge_uploaded_tracepoints (&uploaded_tps);
}
+ /* The thread and inferior lists are now synchronized with the
+ target, our symbols have been relocated, and we're merged the
+ target's tracepoints with ours. We're done with basic start
+ up. */
+ rs->starting_up = 0;
+
/* If breakpoints are global, insert them now. */
if (gdbarch_has_global_breakpoints (target_gdbarch)
&& breakpoints_always_inserted_mode ())
{
struct remote_state *rs = get_remote_state ();
- sprintf (rs->buf, "QAllow:"
- "WriteReg:%x;WriteMem:%x;"
- "InsertBreak:%x;InsertTrace:%x;"
- "InsertFastTrace:%x;Stop:%x",
- may_write_registers, may_write_memory,
- may_insert_breakpoints, may_insert_tracepoints,
- may_insert_fast_tracepoints, may_stop);
+ xsnprintf (rs->buf, get_remote_packet_size (), "QAllow:"
+ "WriteReg:%x;WriteMem:%x;"
+ "InsertBreak:%x;InsertTrace:%x;"
+ "InsertFastTrace:%x;Stop:%x",
+ may_write_registers, may_write_memory,
+ may_insert_breakpoints, may_insert_tracepoints,
+ may_insert_fast_tracepoints, may_stop);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
rs->cond_tracepoints = (support == PACKET_ENABLE);
}
+static void
+remote_cond_breakpoint_feature (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ rs->cond_breakpoints = (support == PACKET_ENABLE);
+}
+
static void
remote_fast_tracepoint_feature (const struct protocol_feature *feature,
enum packet_support support,
PACKET_qXfer_traceframe_info },
{ "QPassSignals", PACKET_DISABLE, remote_supported_packet,
PACKET_QPassSignals },
+ { "QProgramSignals", PACKET_DISABLE, remote_supported_packet,
+ PACKET_QProgramSignals },
{ "QStartNoAckMode", PACKET_DISABLE, remote_supported_packet,
PACKET_QStartNoAckMode },
{ "multiprocess", PACKET_DISABLE, remote_multi_process_feature, -1 },
PACKET_qXfer_siginfo_write },
{ "ConditionalTracepoints", PACKET_DISABLE, remote_cond_tracepoint_feature,
PACKET_ConditionalTracepoints },
+ { "ConditionalBreakpoints", PACKET_DISABLE, remote_cond_breakpoint_feature,
+ PACKET_ConditionalBreakpoints },
{ "FastTracepoints", PACKET_DISABLE, remote_fast_tracepoint_feature,
PACKET_FastTracepoints },
{ "StaticTracepoints", PACKET_DISABLE, remote_static_tracepoint_feature,
remote_enable_disable_tracepoint_feature, -1 },
{ "qXfer:fdpic:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_fdpic },
+ { "qXfer:uib:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_uib },
{ "QDisableRandomization", PACKET_DISABLE, remote_supported_packet,
PACKET_QDisableRandomization },
+ { "QAgent", PACKET_DISABLE, remote_supported_packet, PACKET_QAgent},
{ "tracenz", PACKET_DISABLE,
remote_string_tracing_feature, -1 },
};
xfree (last_pass_packet);
last_pass_packet = NULL;
+ /* Make sure we send the program signals list the next time we
+ resume. */
+ xfree (last_program_signals_packet);
+ last_program_signals_packet = NULL;
+
remote_fileio_reset ();
reopen_exec_file ();
reread_symbols ();
if (!target_has_execution)
error (_("No process to detach from."));
+ if (from_tty)
+ {
+ char *exec_file = get_exec_file (0);
+ if (exec_file == NULL)
+ exec_file = "";
+ printf_unfiltered (_("Detaching from program: %s, %s\n"), exec_file,
+ target_pid_to_str (pid_to_ptid (pid)));
+ gdb_flush (gdb_stdout);
+ }
+
/* Tell the remote target to detach. */
if (remote_multi_process_p (rs))
- sprintf (rs->buf, "D;%x", pid);
+ xsnprintf (rs->buf, get_remote_packet_size (), "D;%x", pid);
else
strcpy (rs->buf, "D");
else
error (_("Can't detach process."));
- if (from_tty)
- {
- if (remote_multi_process_p (rs))
- printf_filtered (_("Detached from remote %s.\n"),
- target_pid_to_str (pid_to_ptid (pid)));
- else
- {
- if (extended)
- puts_filtered (_("Detached from remote process.\n"));
- else
- puts_filtered (_("Ending remote debugging.\n"));
- }
- }
+ if (from_tty && !extended)
+ puts_filtered (_("Ending remote debugging.\n"));
discard_pending_stop_replies (pid);
target_mourn_inferior ();
if (remote_protocol_packets[PACKET_vAttach].support == PACKET_DISABLE)
error (_("This target does not support attaching to a process"));
- sprintf (rs->buf, "vAttach;%x", pid);
+ if (from_tty)
+ {
+ char *exec_file = get_exec_file (0);
+
+ if (exec_file)
+ printf_unfiltered (_("Attaching to program: %s, %s\n"), exec_file,
+ target_pid_to_str (pid_to_ptid (pid)));
+ else
+ printf_unfiltered (_("Attaching to %s\n"),
+ target_pid_to_str (pid_to_ptid (pid)));
+
+ gdb_flush (gdb_stdout);
+ }
+
+ xsnprintf (rs->buf, get_remote_packet_size (), "vAttach;%x", pid);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
if (packet_ok (rs->buf,
&remote_protocol_packets[PACKET_vAttach]) == PACKET_OK)
{
- if (from_tty)
- printf_unfiltered (_("Attached to %s\n"),
- target_pid_to_str (pid_to_ptid (pid)));
-
if (!non_stop)
{
/* Save the reply for later. */
async_remote_interrupt (gdb_client_data arg)
{
if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "remote_interrupt called\n");
+ fprintf_unfiltered (gdb_stdlog, "async_remote_interrupt called\n");
target_stop (inferior_ptid);
}
async_remote_interrupt_twice (gdb_client_data arg)
{
if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "remote_interrupt_twice called\n");
+ fprintf_unfiltered (gdb_stdlog, "async_remote_interrupt_twice called\n");
interrupt_query ();
}
struct remote_state *rs = get_remote_state ();
int buf_len;
- sprintf (rs->buf, "g");
+ xsnprintf (rs->buf, get_remote_packet_size (), "g");
remote_send (&rs->buf, &rs->buf_size);
/* We can get out of synch in various cases. If the first character
return -1;
/* Tell the remote target to detach. */
- sprintf (rs->buf, "vKill;%x", pid);
+ xsnprintf (rs->buf, get_remote_packet_size (), "vKill;%x", pid);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
struct remote_state *rs = get_remote_state ();
char *reply;
- sprintf (rs->buf, "QDisableRandomization:%x", val);
+ xsnprintf (rs->buf, get_remote_packet_size (), "QDisableRandomization:%x",
+ val);
putpkt (rs->buf);
reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
if (*reply == '\0')
}
\f
+/* Given a location's target info BP_TGT and the packet buffer BUF, output
+ the list of conditions (in agent expression bytecode format), if any, the
+ target needs to evaluate. The output is placed into the packet buffer
+ started from BUF and ended at BUF_END. */
+
+static int
+remote_add_target_side_condition (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt, char *buf,
+ char *buf_end)
+{
+ struct agent_expr *aexpr = NULL;
+ int i, ix;
+ char *pkt;
+ char *buf_start = buf;
+
+ if (VEC_empty (agent_expr_p, bp_tgt->conditions))
+ return 0;
+
+ buf += strlen (buf);
+ xsnprintf (buf, buf_end - buf, "%s", ";");
+ buf++;
+
+ /* Send conditions to the target and free the vector. */
+ for (ix = 0;
+ VEC_iterate (agent_expr_p, bp_tgt->conditions, ix, aexpr);
+ ix++)
+ {
+ xsnprintf (buf, buf_end - buf, "X%x,", aexpr->len);
+ buf += strlen (buf);
+ for (i = 0; i < aexpr->len; ++i)
+ buf = pack_hex_byte (buf, aexpr->buf[i]);
+ *buf = '\0';
+ }
+
+ VEC_free (agent_expr_p, bp_tgt->conditions);
+ return 0;
+}
+
/* Insert a breakpoint. On targets that have software breakpoint
support, we ask the remote target to do the work; on targets
which don't, we insert a traditional memory breakpoint. */
{
CORE_ADDR addr = bp_tgt->placed_address;
struct remote_state *rs;
- char *p;
+ char *p, *endbuf;
int bpsize;
+ struct condition_list *cond = NULL;
gdbarch_remote_breakpoint_from_pc (gdbarch, &addr, &bpsize);
rs = get_remote_state ();
p = rs->buf;
+ endbuf = rs->buf + get_remote_packet_size ();
*(p++) = 'Z';
*(p++) = '0';
*(p++) = ',';
addr = (ULONGEST) remote_address_masked (addr);
p += hexnumstr (p, addr);
- sprintf (p, ",%d", bpsize);
+ xsnprintf (p, endbuf - p, ",%d", bpsize);
+
+ if (remote_supports_cond_breakpoints ())
+ remote_add_target_side_condition (gdbarch, bp_tgt, p, endbuf);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
if (remote_protocol_packets[PACKET_Z0].support != PACKET_DISABLE)
{
char *p = rs->buf;
+ char *endbuf = rs->buf + get_remote_packet_size ();
*(p++) = 'z';
*(p++) = '0';
addr = (ULONGEST) remote_address_masked (bp_tgt->placed_address);
p += hexnumstr (p, addr);
- sprintf (p, ",%d", bp_tgt->placed_size);
+ xsnprintf (p, endbuf - p, ",%d", bp_tgt->placed_size);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
struct expression *cond)
{
struct remote_state *rs = get_remote_state ();
+ char *endbuf = rs->buf + get_remote_packet_size ();
char *p;
enum Z_packet_type packet = watchpoint_to_Z_packet (type);
if (remote_protocol_packets[PACKET_Z0 + packet].support == PACKET_DISABLE)
return 1;
- sprintf (rs->buf, "Z%x,", packet);
+ xsnprintf (rs->buf, endbuf - rs->buf, "Z%x,", packet);
p = strchr (rs->buf, '\0');
addr = remote_address_masked (addr);
p += hexnumstr (p, (ULONGEST) addr);
- sprintf (p, ",%x", len);
+ xsnprintf (p, endbuf - p, ",%x", len);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
_("remote_insert_watchpoint: reached end of function"));
}
+static int
+remote_watchpoint_addr_within_range (struct target_ops *target, CORE_ADDR addr,
+ CORE_ADDR start, int length)
+{
+ CORE_ADDR diff = remote_address_masked (addr - start);
+
+ return diff < length;
+}
+
static int
remote_remove_watchpoint (CORE_ADDR addr, int len, int type,
struct expression *cond)
{
struct remote_state *rs = get_remote_state ();
+ char *endbuf = rs->buf + get_remote_packet_size ();
char *p;
enum Z_packet_type packet = watchpoint_to_Z_packet (type);
if (remote_protocol_packets[PACKET_Z0 + packet].support == PACKET_DISABLE)
return -1;
- sprintf (rs->buf, "z%x,", packet);
+ xsnprintf (rs->buf, endbuf - rs->buf, "z%x,", packet);
p = strchr (rs->buf, '\0');
addr = remote_address_masked (addr);
p += hexnumstr (p, (ULONGEST) addr);
- sprintf (p, ",%x", len);
+ xsnprintf (p, endbuf - p, ",%x", len);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
{
CORE_ADDR addr;
struct remote_state *rs;
- char *p;
+ char *p, *endbuf;
/* The length field should be set to the size of a breakpoint
instruction, even though we aren't inserting one ourselves. */
rs = get_remote_state ();
p = rs->buf;
+ endbuf = rs->buf + get_remote_packet_size ();
*(p++) = 'Z';
*(p++) = '1';
addr = remote_address_masked (bp_tgt->placed_address);
p += hexnumstr (p, (ULONGEST) addr);
- sprintf (p, ",%x", bp_tgt->placed_size);
+ xsnprintf (p, endbuf - p, ",%x", bp_tgt->placed_size);
+
+ if (remote_supports_cond_breakpoints ())
+ remote_add_target_side_condition (gdbarch, bp_tgt, p, endbuf);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
CORE_ADDR addr;
struct remote_state *rs = get_remote_state ();
char *p = rs->buf;
+ char *endbuf = rs->buf + get_remote_packet_size ();
if (remote_protocol_packets[PACKET_Z1].support == PACKET_DISABLE)
return -1;
addr = remote_address_masked (bp_tgt->placed_address);
p += hexnumstr (p, (ULONGEST) addr);
- sprintf (p, ",%x", bp_tgt->placed_size);
+ xsnprintf (p, endbuf - p, ",%x", bp_tgt->placed_size);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
case TARGET_OBJECT_FDPIC:
return remote_read_qxfer (ops, "fdpic", annex, readbuf, offset, len,
&remote_protocol_packets[PACKET_qXfer_fdpic]);
+
+ case TARGET_OBJECT_OPENVMS_UIB:
+ return remote_read_qxfer (ops, "uib", annex, readbuf, offset, len,
+ &remote_protocol_packets[PACKET_qXfer_uib]);
+
default:
return -1;
}
char *buf;
/* XXX - see also remote_get_noisy_reply(). */
+ QUIT; /* Allow user to bail out with ^C. */
rs->buf[0] = '\0';
- getpkt (&rs->buf, &rs->buf_size, 0);
+ if (getpkt_sane (&rs->buf, &rs->buf_size, 0) == -1)
+ {
+ /* Timeout. Continue to (try to) read responses.
+ This is better than stopping with an error, assuming the stub
+ is still executing the (long) monitor command.
+ If needed, the user can interrupt gdb using C-c, obtaining
+ an effect similar to stop on timeout. */
+ continue;
+ }
buf = rs->buf;
if (buf[0] == '\0')
error (_("Target does not support this command."));
static char buf[64];
struct remote_state *rs = get_remote_state ();
- if (ptid_is_pid (ptid))
+ if (ptid_equal (ptid, null_ptid))
+ return normal_pid_to_str (ptid);
+ else if (ptid_is_pid (ptid))
{
/* Printing an inferior target id. */
/* Provide thread local base, i.e. Thread Information Block address.
Returns 1 if ptid is found and thread_local_base is non zero. */
-int
+static int
remote_get_tib_address (ptid_t ptid, CORE_ADDR *addr)
{
if (remote_protocol_packets[PACKET_qGetTIBAddr].support != PACKET_DISABLE)
return rs->extended && remote_multi_process_p (rs);
}
-int
+static int
remote_supports_cond_tracepoints (void)
{
struct remote_state *rs = get_remote_state ();
return rs->cond_tracepoints;
}
-int
+static int
+remote_supports_cond_breakpoints (void)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ return rs->cond_breakpoints;
+}
+
+static int
remote_supports_fast_tracepoints (void)
{
struct remote_state *rs = get_remote_state ();
static void
remote_download_tracepoint (struct bp_location *loc)
{
+#define BUF_SIZE 2048
CORE_ADDR tpaddr;
char addrbuf[40];
- char buf[2048];
+ char buf[BUF_SIZE];
char **tdp_actions;
char **stepping_actions;
int ndx;
tpaddr = loc->address;
sprintf_vma (addrbuf, tpaddr);
- sprintf (buf, "QTDP:%x:%s:%c:%lx:%x", b->number,
- addrbuf, /* address */
- (b->enable_state == bp_enabled ? 'E' : 'D'),
- t->step_count, t->pass_count);
+ xsnprintf (buf, BUF_SIZE, "QTDP:%x:%s:%c:%lx:%x", b->number,
+ addrbuf, /* address */
+ (b->enable_state == bp_enabled ? 'E' : 'D'),
+ t->step_count, t->pass_count);
/* Fast tracepoints are mostly handled by the target, but we can
tell the target how big of an instruction block should be moved
around. */
if (gdbarch_fast_tracepoint_valid_at (target_gdbarch,
tpaddr, &isize, NULL))
- sprintf (buf + strlen (buf), ":F%x", isize);
+ xsnprintf (buf + strlen (buf), BUF_SIZE - strlen (buf), ":F%x",
+ isize);
else
/* If it passed validation at definition but fails now,
something is very wrong. */
{
aexpr = gen_eval_for_expr (tpaddr, loc->cond);
aexpr_chain = make_cleanup_free_agent_expr (aexpr);
- sprintf (buf + strlen (buf), ":X%x,", aexpr->len);
+ xsnprintf (buf + strlen (buf), BUF_SIZE - strlen (buf), ":X%x,",
+ aexpr->len);
pkt = buf + strlen (buf);
for (ndx = 0; ndx < aexpr->len; ++ndx)
pkt = pack_hex_byte (pkt, aexpr->buf[ndx]);
for (ndx = 0; tdp_actions[ndx]; ndx++)
{
QUIT; /* Allow user to bail out with ^C. */
- sprintf (buf, "QTDP:-%x:%s:%s%c",
- b->number, addrbuf, /* address */
- tdp_actions[ndx],
- ((tdp_actions[ndx + 1] || stepping_actions)
- ? '-' : 0));
+ xsnprintf (buf, BUF_SIZE, "QTDP:-%x:%s:%s%c",
+ b->number, addrbuf, /* address */
+ tdp_actions[ndx],
+ ((tdp_actions[ndx + 1] || stepping_actions)
+ ? '-' : 0));
putpkt (buf);
remote_get_noisy_reply (&target_buf,
&target_buf_size);
for (ndx = 0; stepping_actions[ndx]; ndx++)
{
QUIT; /* Allow user to bail out with ^C. */
- sprintf (buf, "QTDP:-%x:%s:%s%s%s",
- b->number, addrbuf, /* address */
- ((ndx == 0) ? "S" : ""),
- stepping_actions[ndx],
- (stepping_actions[ndx + 1] ? "-" : ""));
+ xsnprintf (buf, BUF_SIZE, "QTDP:-%x:%s:%s%s%s",
+ b->number, addrbuf, /* address */
+ ((ndx == 0) ? "S" : ""),
+ stepping_actions[ndx],
+ (stepping_actions[ndx + 1] ? "-" : ""));
putpkt (buf);
remote_get_noisy_reply (&target_buf,
&target_buf_size);
static int
remote_can_download_tracepoint (void)
{
- struct trace_status *ts = current_trace_status ();
- int status = remote_get_trace_status (ts);
+ struct remote_state *rs = get_remote_state ();
+ struct trace_status *ts;
+ int status;
+
+ /* Don't try to install tracepoints until we've relocated our
+ symbols, and fetched and merged the target's tracepoint list with
+ ours. */
+ if (rs->starting_up)
+ return 0;
+
+ ts = current_trace_status ();
+ status = remote_get_trace_status (ts);
if (status == -1 || !ts->running_known || !ts->running)
return 0;
struct remote_state *rs = get_remote_state ();
char *p;
- sprintf (rs->buf, "QTDV:%x:%s:%x:",
- tsv->number, phex ((ULONGEST) tsv->initial_value, 8), tsv->builtin);
+ xsnprintf (rs->buf, get_remote_packet_size (), "QTDV:%x:%s:%x:",
+ tsv->number, phex ((ULONGEST) tsv->initial_value, 8),
+ tsv->builtin);
p = rs->buf + strlen (rs->buf);
if ((p - rs->buf) + strlen (tsv->name) * 2 >= get_remote_packet_size ())
error (_("Trace state variable name too long for tsv definition packet"));
char addr_buf[40];
sprintf_vma (addr_buf, location->address);
- sprintf (rs->buf, "QTEnable:%x:%s", location->owner->number, addr_buf);
+ xsnprintf (rs->buf, get_remote_packet_size (), "QTEnable:%x:%s",
+ location->owner->number, addr_buf);
putpkt (rs->buf);
remote_get_noisy_reply (&rs->buf, &rs->buf_size);
if (*rs->buf == '\0')
char addr_buf[40];
sprintf_vma (addr_buf, location->address);
- sprintf (rs->buf, "QTDisable:%x:%s", location->owner->number, addr_buf);
+ xsnprintf (rs->buf, get_remote_packet_size (), "QTDisable:%x:%s",
+ location->owner->number, addr_buf);
putpkt (rs->buf);
remote_get_noisy_reply (&rs->buf, &rs->buf_size);
if (*rs->buf == '\0')
Too many sections for read-only sections definition packet."));
break;
}
- sprintf (target_buf + offset, ":%s,%s", tmp1, tmp2);
+ xsnprintf (target_buf + offset, target_buf_size - offset, ":%s,%s",
+ tmp1, tmp2);
offset += sec_length;
}
if (anysecs)
return ts->running;
}
-void
+static void
remote_get_tracepoint_status (struct breakpoint *bp,
struct uploaded_tp *utp)
{
char *reply;
struct bp_location *loc;
struct tracepoint *tp = (struct tracepoint *) bp;
+ size_t size = get_remote_packet_size ();
if (tp)
{
any status. */
if (tp->number_on_target == 0)
continue;
- sprintf (rs->buf, "qTP:%x:%s", tp->number_on_target,
- phex_nz (loc->address, 0));
+ xsnprintf (rs->buf, size, "qTP:%x:%s", tp->number_on_target,
+ phex_nz (loc->address, 0));
putpkt (rs->buf);
reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
if (reply && *reply)
{
utp->hit_count = 0;
utp->traceframe_usage = 0;
- sprintf (rs->buf, "qTP:%x:%s", utp->number, phex_nz (utp->addr, 0));
+ xsnprintf (rs->buf, size, "qTP:%x:%s", utp->number,
+ phex_nz (utp->addr, 0));
putpkt (rs->buf);
reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
if (reply && *reply)
int *tpp)
{
struct remote_state *rs = get_remote_state ();
+ char *endbuf = rs->buf + get_remote_packet_size ();
char *p, *reply;
int target_frameno = -1, target_tracept = -1;
switch (type)
{
case tfind_number:
- sprintf (p, "%x", num);
+ xsnprintf (p, endbuf - p, "%x", num);
break;
case tfind_pc:
- sprintf (p, "pc:%s", phex_nz (addr1, 0));
+ xsnprintf (p, endbuf - p, "pc:%s", phex_nz (addr1, 0));
break;
case tfind_tp:
- sprintf (p, "tdp:%x", num);
+ xsnprintf (p, endbuf - p, "tdp:%x", num);
break;
case tfind_range:
- sprintf (p, "range:%s:%s", phex_nz (addr1, 0), phex_nz (addr2, 0));
+ xsnprintf (p, endbuf - p, "range:%s:%s", phex_nz (addr1, 0),
+ phex_nz (addr2, 0));
break;
case tfind_outside:
- sprintf (p, "outside:%s:%s", phex_nz (addr1, 0), phex_nz (addr2, 0));
+ xsnprintf (p, endbuf - p, "outside:%s:%s", phex_nz (addr1, 0),
+ phex_nz (addr2, 0));
break;
default:
error (_("Unknown trace find type %d"), type);
set_remote_traceframe ();
- sprintf (rs->buf, "qTV:%x", tsvnum);
+ xsnprintf (rs->buf, get_remote_packet_size (), "qTV:%x", tsvnum);
putpkt (rs->buf);
reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
if (reply && *reply)
{
char *reply;
- sprintf (rs->buf, "QTDisconnected:%x", val);
+ xsnprintf (rs->buf, get_remote_packet_size (), "QTDisconnected:%x", val);
putpkt (rs->buf);
reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
if (*reply == '\0')
struct remote_state *rs = get_remote_state ();
char *reply;
- sprintf (rs->buf, "QTBuffer:circular:%x", val);
+ xsnprintf (rs->buf, get_remote_packet_size (), "QTBuffer:circular:%x", val);
putpkt (rs->buf);
reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
if (*reply == '\0')
struct remote_state *rs = get_remote_state ();
char *reply;
- sprintf (rs->buf, "qTMinFTPILen");
+ /* If we're not debugging a process yet, the IPA can't be
+ loaded. */
+ if (!target_has_execution)
+ return 0;
+
+ /* Make sure the remote is pointing at the right process. */
+ set_general_process ();
+
+ xsnprintf (rs->buf, get_remote_packet_size (), "qTMinFTPILen");
putpkt (rs->buf);
reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
if (*reply == '\0')
return 1;
}
+static int
+remote_use_agent (int use)
+{
+ if (remote_protocol_packets[PACKET_QAgent].support != PACKET_DISABLE)
+ {
+ struct remote_state *rs = get_remote_state ();
+
+ /* If the stub supports QAgent. */
+ xsnprintf (rs->buf, get_remote_packet_size (), "QAgent:%d", use);
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ if (strcmp (rs->buf, "OK") == 0)
+ {
+ use_agent = use;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static int
+remote_can_use_agent (void)
+{
+ return (remote_protocol_packets[PACKET_QAgent].support != PACKET_DISABLE);
+}
+
static void
init_remote_ops (void)
{
remote_ops.to_remove_breakpoint = remote_remove_breakpoint;
remote_ops.to_stopped_by_watchpoint = remote_stopped_by_watchpoint;
remote_ops.to_stopped_data_address = remote_stopped_data_address;
+ remote_ops.to_watchpoint_addr_within_range =
+ remote_watchpoint_addr_within_range;
remote_ops.to_can_use_hw_breakpoint = remote_check_watch_resources;
remote_ops.to_insert_hw_breakpoint = remote_insert_hw_breakpoint;
remote_ops.to_remove_hw_breakpoint = remote_remove_hw_breakpoint;
remote_ops.to_load = generic_load;
remote_ops.to_mourn_inferior = remote_mourn;
remote_ops.to_pass_signals = remote_pass_signals;
+ remote_ops.to_program_signals = remote_program_signals;
remote_ops.to_thread_alive = remote_thread_alive;
remote_ops.to_find_new_threads = remote_threads_info;
remote_ops.to_pid_to_str = remote_pid_to_str;
remote_ops.to_fileio_readlink = remote_hostio_readlink;
remote_ops.to_supports_enable_disable_tracepoint = remote_supports_enable_disable_tracepoint;
remote_ops.to_supports_string_tracing = remote_supports_string_tracing;
+ remote_ops.to_supports_evaluation_of_breakpoint_conditions = remote_supports_cond_breakpoints;
remote_ops.to_trace_init = remote_trace_init;
remote_ops.to_download_tracepoint = remote_download_tracepoint;
remote_ops.to_can_download_tracepoint = remote_can_download_tracepoint;
remote_ops.to_static_tracepoint_markers_by_strid
= remote_static_tracepoint_markers_by_strid;
remote_ops.to_traceframe_info = remote_traceframe_info;
+ remote_ops.to_use_agent = remote_use_agent;
+ remote_ops.to_can_use_agent = remote_can_use_agent;
}
/* Set up the extended remote vector by making a copy of the standard
add_packet_config_cmd (&remote_protocol_packets[PACKET_QPassSignals],
"QPassSignals", "pass-signals", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_QProgramSignals],
+ "QProgramSignals", "program-signals", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qSymbol],
"qSymbol", "symbol-lookup", 0);
(&remote_protocol_packets[PACKET_qXfer_traceframe_info],
"qXfer:trace-frame-info:read", "traceframe-info", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_uib],
+ "qXfer:uib:read", "unwind-info-block", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qGetTLSAddr],
"qGetTLSAddr", "get-thread-local-storage-address",
0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_ConditionalTracepoints],
"ConditionalTracepoints",
"conditional-tracepoints", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_ConditionalBreakpoints],
+ "ConditionalBreakpoints",
+ "conditional-breakpoints", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_FastTracepoints],
"FastTracepoints", "fast-tracepoints", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_QDisableRandomization],
"QDisableRandomization", "disable-randomization", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_QAgent],
+ "QAgent", "agent", 0);
+
/* Keep the old ``set remote Z-packet ...'' working. Each individual
Z sub-packet has its own set and show commands, but users may
have sets to this variable in their .gdbinit files (or in their
projects / deliverable / binutils-gdb.git / blobdiff