PACKET_QTBuffer_size,
PACKET_Qbtrace_off,
PACKET_Qbtrace_bts,
+ PACKET_Qbtrace_pt,
PACKET_qXfer_btrace,
/* Support for the QNonStop packet. */
/* Support for vfork events. */
PACKET_vfork_event_feature,
+ /* Support for the Qbtrace-conf:pt:size packet. */
+ PACKET_Qbtrace_conf_pt_size,
+
PACKET_MAX
};
/* No multi-process. Just a tid. */
pp = unpack_varlen_hex (p, &tid);
+ /* Return null_ptid when no thread id is found. */
+ if (p == pp)
+ {
+ if (obuf)
+ *obuf = pp;
+ return null_ptid;
+ }
+
/* Since the stub is not sending a process id, then default to
what's in inferior_ptid, unless it's null at this point. If so,
then since there's no way to know the pid of the reported
putpkt ("qC");
getpkt (&rs->buf, &rs->buf_size, 0);
if (rs->buf[0] == 'Q' && rs->buf[1] == 'C')
- return read_ptid (&rs->buf[2], NULL);
+ {
+ char *obuf;
+ ptid_t result;
+
+ result = read_ptid (&rs->buf[2], &obuf);
+ if (*obuf != '\0' && remote_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "warning: garbage in qC reply\n");
+
+ return result;
+ }
else
return oldpid;
}
static ptid_t
get_current_thread (char *wait_status)
{
- ptid_t ptid;
+ ptid_t ptid = null_ptid;
/* Note we don't use remote_parse_stop_reply as that makes use of
the target architecture, which we haven't yet fully determined at
{
struct remote_state *rs = get_remote_state ();
int fake_pid_p = 0;
- ptid_t ptid = null_ptid;
+ ptid_t ptid;
inferior_ptid = null_ptid;
tell us which thread was current (no "thread"
register in T stop reply?). Just pick the first
thread in the thread list then. */
+
+ if (remote_debug)
+ fprintf_unfiltered (gdb_stdlog,
+ "warning: couldn't determine remote "
+ "current thread; picking first in list.\n");
+
inferior_ptid = thread_list->ptid;
}
}
{ "tracenz", PACKET_DISABLE, remote_supported_packet, PACKET_tracenz_feature },
{ "Qbtrace:off", PACKET_DISABLE, remote_supported_packet, PACKET_Qbtrace_off },
{ "Qbtrace:bts", PACKET_DISABLE, remote_supported_packet, PACKET_Qbtrace_bts },
+ { "Qbtrace:pt", PACKET_DISABLE, remote_supported_packet, PACKET_Qbtrace_pt },
{ "qXfer:btrace:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_btrace },
{ "qXfer:btrace-conf:read", PACKET_DISABLE, remote_supported_packet,
PACKET_fork_event_feature },
{ "vfork-events", PACKET_DISABLE, remote_supported_packet,
PACKET_vfork_event_feature },
+ { "Qbtrace-conf:pt:size", PACKET_DISABLE, remote_supported_packet,
+ PACKET_Qbtrace_conf_pt_size }
};
static char *remote_support_xml;
this case we treat the remote filesystem as local if the
sysroot is exactly TARGET_SYSROOT_PREFIX and if the stub
does not support vFile:open. */
- if (gdb_sysroot != NULL
- && strcmp (gdb_sysroot, TARGET_SYSROOT_PREFIX) == 0)
+ if (strcmp (gdb_sysroot, TARGET_SYSROOT_PREFIX) == 0)
{
enum packet_support ps = packet_support (PACKET_vFile_open);
case BTRACE_FORMAT_BTS:
return (packet_support (PACKET_Qbtrace_bts) == PACKET_ENABLE);
+
+ case BTRACE_FORMAT_PT:
+ /* The trace is decoded on the host. Even if our target supports it,
+ we still need to have libipt to decode the trace. */
+#if defined (HAVE_LIBIPT)
+ return (packet_support (PACKET_Qbtrace_pt) == PACKET_ENABLE);
+#else /* !defined (HAVE_LIBIPT) */
+ return 0;
+#endif /* !defined (HAVE_LIBIPT) */
}
internal_error (__FILE__, __LINE__, _("Unknown branch trace format"));
rs->btrace_config.bts.size = conf->bts.size;
}
+
+ packet = &remote_protocol_packets[PACKET_Qbtrace_conf_pt_size];
+ if (packet_config_support (packet) == PACKET_ENABLE
+ && conf->pt.size != rs->btrace_config.pt.size)
+ {
+ pos = buf;
+ pos += xsnprintf (pos, endbuf - pos, "%s=0x%x", packet->name,
+ conf->pt.size);
+
+ putpkt (buf);
+ getpkt (&buf, &rs->buf_size, 0);
+
+ if (packet_ok (buf, packet) == PACKET_ERROR)
+ {
+ if (buf[0] == 'E' && buf[1] == '.')
+ error (_("Failed to configure the trace buffer size: %s"), buf + 2);
+ else
+ error (_("Failed to configure the trace buffer size."));
+ }
+
+ rs->btrace_config.pt.size = conf->pt.size;
+ }
}
/* Read the current thread's btrace configuration from the target and
char *xml;
xml = target_read_stralloc (¤t_target,
- TARGET_OBJECT_BTRACE_CONF, "");
+ TARGET_OBJECT_BTRACE_CONF, "");
if (xml != NULL)
{
struct cleanup *cleanup;
const struct btrace_config *conf)
{
struct btrace_target_info *tinfo = NULL;
- struct packet_config *packet = &remote_protocol_packets[PACKET_Qbtrace_bts];
+ struct packet_config *packet = NULL;
struct remote_state *rs = get_remote_state ();
char *buf = rs->buf;
char *endbuf = rs->buf + get_remote_packet_size ();
- if (packet_config_support (packet) != PACKET_ENABLE)
+ switch (conf->format)
+ {
+ case BTRACE_FORMAT_BTS:
+ packet = &remote_protocol_packets[PACKET_Qbtrace_bts];
+ break;
+
+ case BTRACE_FORMAT_PT:
+ packet = &remote_protocol_packets[PACKET_Qbtrace_pt];
+ break;
+ }
+
+ if (packet == NULL || packet_config_support (packet) != PACKET_ENABLE)
error (_("Target does not support branch tracing."));
btrace_sync_conf (conf);
}
xml = target_read_stralloc (¤t_target,
- TARGET_OBJECT_BTRACE, annex);
+ TARGET_OBJECT_BTRACE, annex);
if (xml == NULL)
return BTRACE_ERR_UNKNOWN;
"Qbtrace:off", "disable-btrace", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_Qbtrace_bts],
- "Qbtrace:bts", "enable-btrace", 0);
+ "Qbtrace:bts", "enable-btrace-bts", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_Qbtrace_pt],
+ "Qbtrace:pt", "enable-btrace-pt", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_btrace],
"qXfer:btrace", "read-btrace", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_vfork_event_feature],
"vfork-event-feature", "vfork-event-feature", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_Qbtrace_conf_pt_size],
+ "Qbtrace-conf:pt:size", "btrace-conf-pt-size", 0);
+
/* Assert that we've registered "set remote foo-packet" commands
for all packet configs. */
{
projects / deliverable / binutils-gdb.git / blobdiff