static void remote_async (void (*callback) (enum inferior_event_type event_type,
void *context), void *context);
-static int remote_async_mask (int new_mask);
-
static void remote_detach (struct target_ops *ops, char *args, int from_tty);
static void remote_interrupt (int signo);
/* True if the stub reports support for static tracepoints. */
int static_tracepoints;
+ /* True if the stub reports support for installing tracepoint while
+ tracing. */
+ int install_in_trace;
+
/* True if the stub can continue running a trace while GDB is
disconnected. */
int disconnected_tracing;
+ /* True if the stub reports support for enabling and disabling
+ tracepoints while a trace experiment is running. */
+ int enable_disable_tracepoints;
+
+ /* True if the stub can collect strings using tracenz bytecode. */
+ int string_tracing;
+
/* Nonzero if the user has pressed Ctrl-C, but the target hasn't
responded to that. */
int ctrlc_pending_p;
from = ul;
p = pp + 1;
- pp = unpack_varlen_hex (p, &ul);
+ unpack_varlen_hex (p, &ul);
to = ul;
org_to = to;
return 1;
}
-static void *
-init_remote_state (struct gdbarch *gdbarch)
+static int
+map_regcache_remote_table (struct gdbarch *gdbarch, struct packet_reg *regs)
{
int regnum, num_remote_regs, offset;
- struct remote_state *rs = get_remote_state_raw ();
- struct remote_arch_state *rsa;
struct packet_reg **remote_regs;
- rsa = GDBARCH_OBSTACK_ZALLOC (gdbarch, struct remote_arch_state);
-
- /* Use the architecture to build a regnum<->pnum table, which will be
- 1:1 unless a feature set specifies otherwise. */
- rsa->regs = GDBARCH_OBSTACK_CALLOC (gdbarch,
- gdbarch_num_regs (gdbarch),
- struct packet_reg);
for (regnum = 0; regnum < gdbarch_num_regs (gdbarch); regnum++)
{
- struct packet_reg *r = &rsa->regs[regnum];
+ struct packet_reg *r = ®s[regnum];
if (register_size (gdbarch, regnum) == 0)
/* Do not try to fetch zero-sized (placeholder) registers. */
number. */
remote_regs = alloca (gdbarch_num_regs (gdbarch)
- * sizeof (struct packet_reg *));
+ * sizeof (struct packet_reg *));
for (num_remote_regs = 0, regnum = 0;
regnum < gdbarch_num_regs (gdbarch);
regnum++)
- if (rsa->regs[regnum].pnum != -1)
- remote_regs[num_remote_regs++] = &rsa->regs[regnum];
+ if (regs[regnum].pnum != -1)
+ remote_regs[num_remote_regs++] = ®s[regnum];
qsort (remote_regs, num_remote_regs, sizeof (struct packet_reg *),
compare_pnums);
offset += register_size (gdbarch, remote_regs[regnum]->regnum);
}
+ return offset;
+}
+
+/* Given the architecture described by GDBARCH, return the remote
+ protocol register's number and the register's offset in the g/G
+ packets of GDB register REGNUM, in PNUM and POFFSET respectively.
+ If the target does not have a mapping for REGNUM, return false,
+ otherwise, return true. */
+
+int
+remote_register_number_and_offset (struct gdbarch *gdbarch, int regnum,
+ int *pnum, int *poffset)
+{
+ int sizeof_g_packet;
+ struct packet_reg *regs;
+ struct cleanup *old_chain;
+
+ gdb_assert (regnum < gdbarch_num_regs (gdbarch));
+
+ regs = xcalloc (gdbarch_num_regs (gdbarch), sizeof (struct packet_reg));
+ old_chain = make_cleanup (xfree, regs);
+
+ sizeof_g_packet = map_regcache_remote_table (gdbarch, regs);
+
+ *pnum = regs[regnum].pnum;
+ *poffset = regs[regnum].offset;
+
+ do_cleanups (old_chain);
+
+ return *pnum != -1;
+}
+
+static void *
+init_remote_state (struct gdbarch *gdbarch)
+{
+ struct remote_state *rs = get_remote_state_raw ();
+ struct remote_arch_state *rsa;
+
+ rsa = GDBARCH_OBSTACK_ZALLOC (gdbarch, struct remote_arch_state);
+
+ /* Use the architecture to build a regnum<->pnum table, which will be
+ 1:1 unless a feature set specifies otherwise. */
+ rsa->regs = GDBARCH_OBSTACK_CALLOC (gdbarch,
+ gdbarch_num_regs (gdbarch),
+ struct packet_reg);
+
/* Record the maximum possible size of the g packet - it may turn out
to be smaller. */
- rsa->sizeof_g_packet = offset;
+ rsa->sizeof_g_packet = map_regcache_remote_table (gdbarch, rsa->regs);
/* Default maximum number of characters in a packet body. Many
remote stubs have a hardwired buffer size of 400 bytes
static struct target_ops extended_remote_ops;
-static int remote_async_mask_value = 1;
-
/* FIXME: cagney/1999-09-23: Even though getpkt was called with
``forever'' still use the normal timeout mechanism. This is
currently used by the ASYNC code to guarentee that target reads
PACKET_qXfer_osdata,
PACKET_qXfer_threads,
PACKET_qXfer_statictrace_read,
+ PACKET_qXfer_traceframe_info,
PACKET_qGetTIBAddr,
PACKET_qGetTLSAddr,
PACKET_qSupported,
PACKET_ConditionalTracepoints,
PACKET_FastTracepoints,
PACKET_StaticTracepoints,
+ PACKET_InstallInTrace,
PACKET_bc,
PACKET_bs,
PACKET_TracepointSource,
PACKET_QAllow,
+ PACKET_qXfer_fdpic,
+ PACKET_QDisableRandomization,
PACKET_MAX
};
static ptid_t general_thread;
static ptid_t continue_thread;
+/* This the traceframe which we last selected on the remote system.
+ It will be -1 if no traceframe is selected. */
+static int remote_traceframe_number = -1;
+
/* Find out if the stub attached to PID (and hence GDB should offer to
detach instead of killing it when bailing out). */
it can simply pass through to the inferior without reporting. */
static void
-remote_pass_signals (void)
+remote_pass_signals (int numsigs, unsigned char *pass_signals)
{
if (remote_protocol_packets[PACKET_QPassSignals].support != PACKET_DISABLE)
{
char *pass_packet, *p;
- int numsigs = (int) TARGET_SIGNAL_LAST;
int count = 0, i;
gdb_assert (numsigs < 256);
for (i = 0; i < numsigs; i++)
{
- if (signal_stop_state (i) == 0
- && signal_print_state (i) == 0
- && signal_pass_state (i) == 1)
+ if (pass_signals[i])
count++;
}
pass_packet = xmalloc (count * 3 + strlen ("QPassSignals:") + 1);
p = pass_packet + strlen (pass_packet);
for (i = 0; i < numsigs; i++)
{
- if (signal_stop_state (i) == 0
- && signal_print_state (i) == 0
- && signal_pass_state (i) == 1)
+ if (pass_signals[i])
{
if (i >= 16)
*p++ = tohex (i >> 4);
}
}
-static void
-remote_notice_signals (ptid_t ptid)
-{
- /* Update the remote on signals to silently pass, if they've
- changed. */
- remote_pass_signals ();
-}
-
/* If PTID is MAGIC_NULL_PTID, don't set any thread. If PTID is
MINUS_ONE_PTID, set the thread to -1, so the stub returns the
thread. If GEN is set, set the general thread, if not, then set
/* Multi-process ptid. */
pp = unpack_varlen_hex (p + 1, &pid);
if (*pp != '.')
- error (_("invalid remote ptid: %s\n"), p);
+ error (_("invalid remote ptid: %s"), p);
p = pp;
pp = unpack_varlen_hex (p + 1, &tid);
struct thread_item item;
char *id;
+ struct gdb_xml_value *attr;
- id = VEC_index (gdb_xml_value_s, attributes, 0)->value;
+ id = xml_find_attribute (attributes, "id")->value;
item.ptid = read_ptid (id, NULL);
- if (VEC_length (gdb_xml_value_s, attributes) > 1)
- item.core = *(ULONGEST *) VEC_index (gdb_xml_value_s,
- attributes, 1)->value;
+ attr = xml_find_attribute (attributes, "core");
+ if (attr != NULL)
+ item.core = *(ULONGEST *) attr->value;
else
item.core = -1;
TARGET_OBJECT_THREADS, NULL);
struct cleanup *back_to = make_cleanup (xfree, xml);
+
if (xml && *xml)
{
- struct gdb_xml_parser *parser;
struct threads_parsing_context context;
- struct cleanup *clear_parsing_context;
- context.items = 0;
- /* Note: this parser cleanup is already guarded by BACK_TO
- above. */
- parser = gdb_xml_create_parser_and_cleanup (_("threads"),
- threads_elements,
- &context);
+ context.items = NULL;
+ make_cleanup (clear_threads_parsing_context, &context);
- gdb_xml_use_dtd (parser, "threads.dtd");
-
- clear_parsing_context
- = make_cleanup (clear_threads_parsing_context, &context);
-
- if (gdb_xml_parse (parser, xml) == 0)
+ if (gdb_xml_parse_quick (_("threads"), "threads.dtd",
+ threads_elements, xml, &context) == 0)
{
int i;
struct thread_item *item;
}
}
}
-
- do_cleanups (clear_parsing_context);
}
do_cleanups (back_to);
remote_desc = NULL;
/* We don't have a connection to the remote stub anymore. Get rid
- of all the inferiors and their threads we were controlling. */
- discard_all_inferiors ();
+ of all the inferiors and their threads we were controlling.
+ Reset inferior_ptid to null_ptid first, as otherwise has_stack_frame
+ will be unable to find the thread corresponding to (pid, 0, 0). */
inferior_ptid = null_ptid;
+ discard_all_inferiors ();
/* We're no longer interested in any of these events. */
discard_pending_stop_replies (-1);
return 0;
}
-/* Stub for catch_exception. */
-
-struct start_remote_args
-{
- int from_tty;
-
- /* The current target. */
- struct target_ops *target;
-
- /* Non-zero if this is an extended-remote target. */
- int extended_p;
-};
-
/* Send interrupt_sequence to remote target. */
static void
-send_interrupt_sequence ()
+send_interrupt_sequence (void)
{
if (interrupt_sequence_mode == interrupt_sequence_control_c)
serial_write (remote_desc, "\x03", 1);
}
static void
-remote_start_remote (struct ui_out *uiout, void *opaque)
+remote_start_remote (int from_tty, struct target_ops *target, int extended_p)
{
- struct start_remote_args *args = opaque;
struct remote_state *rs = get_remote_state ();
struct packet_config *noack_config;
char *wait_status = NULL;
immediate_quit++; /* Allow user to interrupt it. */
- /* Ack any packet which the remote side has already sent. */
- serial_write (remote_desc, "+", 1);
-
if (interrupt_on_connect)
send_interrupt_sequence ();
+ /* Ack any packet which the remote side has already sent. */
+ serial_write (remote_desc, "+", 1);
+
/* The first packet we send to the target is the optional "supported
packets" request. If the target can answer this, it will tell us
which later probes to skip. */
rs->noack_mode = 1;
}
- if (args->extended_p)
+ if (extended_p)
{
/* Tell the remote that we are using the extended protocol. */
putpkt ("!");
/* On OSs where the list of libraries is global to all
processes, we fetch them early. */
if (gdbarch_has_global_solist (target_gdbarch))
- solib_add (NULL, args->from_tty, args->target, auto_solib_add);
+ solib_add (NULL, from_tty, target, auto_solib_add);
if (non_stop)
{
controlling. We default to adding them in the running state.
The '?' query below will then tell us about which threads are
stopped. */
- remote_threads_info (args->target);
+ remote_threads_info (target);
}
else if (rs->non_stop_aware)
{
{
if (rs->buf[0] == 'W' || rs->buf[0] == 'X')
{
- if (!args->extended_p)
+ if (!extended_p)
error (_("The target is not running (try extended-remote?)"));
/* We're connected, but not running. Drop out before we
/* Always add the main thread. */
add_thread_silent (inferior_ptid);
+ /* init_wait_for_inferior should be called before get_offsets in order
+ to manage `inserted' flag in bp loc in a correct state.
+ breakpoint_init_inferior, called from init_wait_for_inferior, set
+ `inserted' flag to 0, while before breakpoint_re_set, called from
+ start_remote, set `inserted' flag to 1. In the initialization of
+ inferior, breakpoint_init_inferior should be called first, and then
+ breakpoint_re_set can be called. If this order is broken, state of
+ `inserted' flag is wrong, and cause some problems on breakpoint
+ manipulation. */
+ init_wait_for_inferior ();
+
get_offsets (); /* Get text, data & bss offsets. */
/* If we could not find a description using qXfer, and we know
how to do it some other way, try again. This is not
supported for non-stop; it could be, but it is tricky if
there are no stopped threads when we connect. */
- if (remote_read_description_p (args->target)
+ if (remote_read_description_p (target)
&& gdbarch_target_desc (target_gdbarch) == NULL)
{
target_clear_description ();
rs->cached_wait_status = 1;
immediate_quit--;
- start_remote (args->from_tty); /* Initialize gdb process mechanisms. */
+ start_remote (from_tty); /* Initialize gdb process mechanisms. */
}
else
{
if (thread_count () == 0)
{
- if (!args->extended_p)
+ if (!extended_p)
error (_("The target is not running (try extended-remote?)"));
/* We're connected, but not running. Drop out before we
the stop reply queue. */
gdb_assert (wait_status == NULL);
- /* Update the remote on signals to silently pass, or more
- importantly, which to not ignore, in case a previous session
- had set some different set of signals to be ignored. */
- remote_pass_signals ();
+ /* Report all signals during attach/startup. */
+ remote_pass_signals (0, NULL);
}
/* If we connected to a live target, do some additional setup. */
struct minimal_symbol *sym;
int end;
+ /* The remote side has no concept of inferiors that aren't running
+ yet, it only knows about running processes. If we're connected
+ but our current inferior is not running, we should not invite the
+ remote target to request symbol lookups related to its
+ (unrelated) current process. */
+ if (!target_has_execution)
+ return;
+
if (remote_protocol_packets[PACKET_qSymbol].support == PACKET_DISABLE)
return;
- /* Make sure the remote is pointing at the right process. */
+ /* Make sure the remote is pointing at the right process. Note
+ there's no way to select "no process". */
set_general_process ();
/* Allocate a message buffer. We can't reuse the input buffer in RS,
/* If the target didn't like the packet, warn the user. Do not try
to undo the user's settings, that would just be maddening. */
if (strcmp (rs->buf, "OK") != 0)
- warning ("Remote refused setting permissions with: %s", rs->buf);
+ warning (_("Remote refused setting permissions with: %s"), rs->buf);
}
/* This type describes each known response to the qSupported
rs->static_tracepoints = (support == PACKET_ENABLE);
}
+static void
+remote_install_in_trace_feature (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ rs->install_in_trace = (support == PACKET_ENABLE);
+}
+
static void
remote_disconnected_tracing_feature (const struct protocol_feature *feature,
enum packet_support support,
rs->disconnected_tracing = (support == PACKET_ENABLE);
}
+static void
+remote_enable_disable_tracepoint_feature (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ rs->enable_disable_tracepoints = (support == PACKET_ENABLE);
+}
+
+static void
+remote_string_tracing_feature (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ rs->string_tracing = (support == PACKET_ENABLE);
+}
+
static struct protocol_feature remote_protocol_features[] = {
{ "PacketSize", PACKET_DISABLE, remote_packet_size, -1 },
{ "qXfer:auxv:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_osdata },
{ "qXfer:threads:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_threads },
+ { "qXfer:traceframe-info:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_traceframe_info },
{ "QPassSignals", PACKET_DISABLE, remote_supported_packet,
PACKET_QPassSignals },
{ "QStartNoAckMode", PACKET_DISABLE, remote_supported_packet,
PACKET_FastTracepoints },
{ "StaticTracepoints", PACKET_DISABLE, remote_static_tracepoint_feature,
PACKET_StaticTracepoints },
+ {"InstallInTrace", PACKET_DISABLE, remote_install_in_trace_feature,
+ PACKET_InstallInTrace},
{ "DisconnectedTracing", PACKET_DISABLE, remote_disconnected_tracing_feature,
-1 },
{ "ReverseContinue", PACKET_DISABLE, remote_supported_packet,
PACKET_TracepointSource },
{ "QAllow", PACKET_DISABLE, remote_supported_packet,
PACKET_QAllow },
+ { "EnableDisableTracepoints", PACKET_DISABLE,
+ remote_enable_disable_tracepoint_feature, -1 },
+ { "qXfer:fdpic:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_fdpic },
+ { "QDisableRandomization", PACKET_DISABLE, remote_supported_packet,
+ PACKET_QDisableRandomization },
+ { "tracenz", PACKET_DISABLE,
+ remote_string_tracing_feature, -1 },
};
static char *remote_support_xml;
general_thread = not_sent_ptid;
continue_thread = not_sent_ptid;
+ remote_traceframe_number = -1;
/* Probe for ability to use "ThreadInfo" query, as required. */
use_threadinfo_query = 1;
all the ``target ....'' commands to share a common callback
function. See cli-dump.c. */
{
- struct gdb_exception ex;
- struct start_remote_args args;
-
- args.from_tty = from_tty;
- args.target = target;
- args.extended_p = extended_p;
+ volatile struct gdb_exception ex;
- ex = catch_exception (uiout, remote_start_remote, &args, RETURN_MASK_ALL);
+ TRY_CATCH (ex, RETURN_MASK_ALL)
+ {
+ remote_start_remote (from_tty, target, extended_p);
+ }
if (ex.reason < 0)
{
/* Pop the partially set up target - unless something else did
so we don't have any TID numbers the inferior will
understand. Make sure to only send forms that do not specify
a TID. */
- p = append_resumption (p, endp, minus_one_ptid, step, siggnal);
+ append_resumption (p, endp, minus_one_ptid, step, siggnal);
}
else if (ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid))
{
}
/* And continue others without a signal. */
- p = append_resumption (p, endp, ptid, /*step=*/ 0, TARGET_SIGNAL_0);
+ append_resumption (p, endp, ptid, /*step=*/ 0, TARGET_SIGNAL_0);
}
else
{
/* Scheduler locking; resume only PTID. */
- p = append_resumption (p, endp, ptid, step, siggnal);
+ append_resumption (p, endp, ptid, step, siggnal);
}
gdb_assert (strlen (rs->buf) < get_remote_packet_size ());
last_sent_signal = siggnal;
last_sent_step = step;
- /* Update the inferior on signals to silently pass, if they've changed. */
- remote_pass_signals ();
-
/* The vCont packet doesn't need to specify threads via Hc. */
/* No reverse support (yet) for vCont. */
if (execution_direction != EXEC_REVERSE)
{
/* We don't pass signals to the target in reverse exec mode. */
if (info_verbose && siggnal != TARGET_SIGNAL_0)
- warning (" - Can't pass signal %d to target in reverse: ignored.\n",
+ warning (_(" - Can't pass signal %d to target in reverse: ignored."),
siggnal);
if (step
nptid = ptid;
}
- p = write_ptid (p, endp, nptid);
+ write_ptid (p, endp, nptid);
}
/* In non-stop, we get an immediate OK reply. The stop reply will
tb[1] = 0;
fputs_unfiltered (tb, gdb_stdtarg);
}
- gdb_flush (gdb_stdtarg);
- }
+ gdb_flush (gdb_stdtarg);
+}
typedef struct cached_reg
{
struct target_waitstatus ws;
+ /* Expedited registers. This makes remote debugging a bit more
+ efficient for those targets that provide critical registers as
+ part of their normal status mechanism (as another roundtrip to
+ fetch them is avoided). */
VEC(cached_reg_t) *regcache;
int stopped_by_watchpoint_p;
process_g_packet (regcache);
}
+/* Make the remote selected traceframe match GDB's selected
+ traceframe. */
+
+static void
+set_remote_traceframe (void)
+{
+ int newnum;
+
+ if (remote_traceframe_number == get_traceframe_number ())
+ return;
+
+ /* Avoid recursion, remote_trace_find calls us again. */
+ remote_traceframe_number = get_traceframe_number ();
+
+ newnum = target_trace_find (tfind_number,
+ get_traceframe_number (), 0, 0, NULL);
+
+ /* Should not happen. If it does, all bets are off. */
+ if (newnum != get_traceframe_number ())
+ warning (_("could not set remote traceframe"));
+}
+
static void
remote_fetch_registers (struct target_ops *ops,
struct regcache *regcache, int regnum)
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
+ set_remote_traceframe ();
set_general_thread (inferior_ptid);
if (regnum >= 0)
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
+ set_remote_traceframe ();
set_general_thread (inferior_ptid);
if (regnum >= 0)
{
if (remote_debug)
fprintf_unfiltered (gdb_stdlog,
- "binary downloading suppported by target\n");
+ "binary downloading supported by target\n");
remote_protocol_packets[PACKET_X].support = PACKET_ENABLE;
}
break;
if (todo <= 0)
internal_error (__FILE__, __LINE__,
- _("minumum packet size too small to write data"));
+ _("minimum packet size too small to write data"));
/* If we already need another packet, then try to align the end
of this packet to a useful boundary. */
Returns number of bytes transferred, or 0 (setting errno) for
error. Only transfer a single packet. */
-int
+static int
remote_write_bytes (CORE_ADDR memaddr, const gdb_byte *myaddr, int len)
{
char *packet_format = 0;
Returns number of bytes transferred, or 0 for error. */
-/* NOTE: cagney/1999-10-18: This function (and its siblings in other
- remote targets) shouldn't attempt to read the entire buffer.
- Instead it should read a single packet worth of data and then
- return the byte size of that packet to the caller. The caller (its
- caller and its callers caller ;-) already contains code for
- handling partial reads. */
-
-int
+static int
remote_read_bytes (CORE_ADDR memaddr, gdb_byte *myaddr, int len)
{
struct remote_state *rs = get_remote_state ();
int max_buf_size; /* Max size of packet output buffer. */
- int origlen;
+ char *p;
+ int todo;
+ int i;
if (len <= 0)
return 0;
/* The packet buffer will be large enough for the payload;
get_memory_packet_size ensures this. */
- origlen = len;
- while (len > 0)
- {
- char *p;
- int todo;
- int i;
-
- todo = min (len, max_buf_size / 2); /* num bytes that will fit. */
-
- /* construct "m"<memaddr>","<len>" */
- /* sprintf (rs->buf, "m%lx,%x", (unsigned long) memaddr, todo); */
- memaddr = remote_address_masked (memaddr);
- p = rs->buf;
- *p++ = 'm';
- p += hexnumstr (p, (ULONGEST) memaddr);
- *p++ = ',';
- p += hexnumstr (p, (ULONGEST) todo);
- *p = '\0';
-
- putpkt (rs->buf);
- getpkt (&rs->buf, &rs->buf_size, 0);
-
- if (rs->buf[0] == 'E'
- && isxdigit (rs->buf[1]) && isxdigit (rs->buf[2])
- && rs->buf[3] == '\0')
- {
- /* There is no correspondance between what the remote
- protocol uses for errors and errno codes. We would like
- a cleaner way of representing errors (big enough to
- include errno codes, bfd_error codes, and others). But
- for now just return EIO. */
- errno = EIO;
- return 0;
- }
+ /* Number if bytes that will fit. */
+ todo = min (len, max_buf_size / 2);
- /* Reply describes memory byte by byte,
- each byte encoded as two hex characters. */
-
- p = rs->buf;
- if ((i = hex2bin (p, myaddr, todo)) < todo)
- {
- /* Reply is short. This means that we were able to read
- only part of what we wanted to. */
- return i + (origlen - len);
- }
- myaddr += todo;
- memaddr += todo;
- len -= todo;
+ /* Construct "m"<memaddr>","<len>". */
+ memaddr = remote_address_masked (memaddr);
+ p = rs->buf;
+ *p++ = 'm';
+ p += hexnumstr (p, (ULONGEST) memaddr);
+ *p++ = ',';
+ p += hexnumstr (p, (ULONGEST) todo);
+ *p = '\0';
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (rs->buf[0] == 'E'
+ && isxdigit (rs->buf[1]) && isxdigit (rs->buf[2])
+ && rs->buf[3] == '\0')
+ {
+ /* There is no correspondance between what the remote protocol
+ uses for errors and errno codes. We would like a cleaner way
+ of representing errors (big enough to include errno codes,
+ bfd_error codes, and others). But for now just return
+ EIO. */
+ errno = EIO;
+ return 0;
}
- return origlen;
+ /* Reply describes memory byte by byte, each byte encoded as two hex
+ characters. */
+ p = rs->buf;
+ i = hex2bin (p, myaddr, todo);
+ /* Return what we have. Let higher layers handle partial reads. */
+ return i;
}
\f
{
int res;
+ set_remote_traceframe ();
set_general_thread (inferior_ptid);
if (should_write)
case '-':
if (remote_debug)
fprintf_unfiltered (gdb_stdlog, "Nak\n");
+ /* FALLTHROUGH */
case SERIAL_TIMEOUT:
tcount++;
if (tcount > 3)
extended_remote_mourn_1 (ops);
}
+static int
+extended_remote_supports_disable_randomization (void)
+{
+ return (remote_protocol_packets[PACKET_QDisableRandomization].support
+ == PACKET_ENABLE);
+}
+
+static void
+extended_remote_disable_randomization (int val)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *reply;
+
+ sprintf (rs->buf, "QDisableRandomization:%x", val);
+ putpkt (rs->buf);
+ reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (*reply == '\0')
+ error (_("Target does not support QDisableRandomization."));
+ if (strcmp (reply, "OK") != 0)
+ error (_("Bogus QDisableRandomization reply from target: %s"), reply);
+}
+
static int
extended_remote_run (char *args)
{
if (target_can_async_p ())
target_async (inferior_event_handler, 0);
+ /* Disable address space randomization if requested (and supported). */
+ if (extended_remote_supports_disable_randomization ())
+ extended_remote_disable_randomization (disable_randomization);
+
/* Now restart the remote server. */
if (extended_remote_run (args) == -1)
{
int remote_hw_watchpoint_limit = -1;
+int remote_hw_watchpoint_length_limit = -1;
int remote_hw_breakpoint_limit = -1;
+static int
+remote_region_ok_for_hw_watchpoint (CORE_ADDR addr, int len)
+{
+ if (remote_hw_watchpoint_length_limit == 0)
+ return 0;
+ else if (remote_hw_watchpoint_length_limit < 0)
+ return 1;
+ else if (len <= remote_hw_watchpoint_length_limit)
+ return 1;
+ else
+ return 0;
+}
+
static int
remote_check_watch_resources (int type, int cnt, int ot)
{
char *p2;
char query_type;
+ set_remote_traceframe ();
set_general_thread (inferior_ptid);
rs = get_remote_state ();
return remote_read_qxfer (ops, "threads", annex, readbuf, offset, len,
&remote_protocol_packets[PACKET_qXfer_threads]);
+ case TARGET_OBJECT_TRACEFRAME_INFO:
+ gdb_assert (annex == NULL);
+ return remote_read_qxfer
+ (ops, "traceframe-info", annex, readbuf, offset, len,
+ &remote_protocol_packets[PACKET_qXfer_traceframe_info]);
+
+ case TARGET_OBJECT_FDPIC:
+ return remote_read_qxfer (ops, "fdpic", annex, readbuf, offset, len,
+ &remote_protocol_packets[PACKET_qXfer_fdpic]);
default:
return -1;
}
return 1;
}
+static int
+remote_supports_disable_randomization (void)
+{
+ /* Only supported in extended mode. */
+ return 0;
+}
+
static int
remote_supports_multi_process (void)
{
return rs->static_tracepoints;
}
+static int
+remote_supports_install_in_trace (void)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ return rs->install_in_trace;
+}
+
+static int
+remote_supports_enable_disable_tracepoint (void)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ return rs->enable_disable_tracepoints;
+}
+
+static int
+remote_supports_string_tracing (void)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ return rs->string_tracing;
+}
+
static void
remote_trace_init (void)
{
}
static void
-remote_download_tracepoint (struct breakpoint *t)
+remote_download_tracepoint (struct bp_location *loc)
{
- struct bp_location *loc;
+
CORE_ADDR tpaddr;
char addrbuf[40];
char buf[2048];
struct agent_expr *aexpr;
struct cleanup *aexpr_chain = NULL;
char *pkt;
-
- /* Iterate over all the tracepoint locations. It's up to the target to
- notice multiple tracepoint packets with the same number but different
- addresses, and treat them as multiple locations. */
- for (loc = t->loc; loc; loc = loc->next)
- {
- encode_actions (t, loc, &tdp_actions, &stepping_actions);
- old_chain = make_cleanup (free_actions_list_cleanup_wrapper,
- tdp_actions);
- (void) make_cleanup (free_actions_list_cleanup_wrapper,
- stepping_actions);
-
- tpaddr = loc->address;
- sprintf_vma (addrbuf, tpaddr);
- sprintf (buf, "QTDP:%x:%s:%c:%lx:%x", t->number,
- addrbuf, /* address */
- (t->enable_state == bp_enabled ? 'E' : 'D'),
- t->step_count, t->pass_count);
- /* Fast tracepoints are mostly handled by the target, but we can
- tell the target how big of an instruction block should be moved
- around. */
- if (t->type == bp_fast_tracepoint)
+ struct breakpoint *b = loc->owner;
+ struct tracepoint *t = (struct tracepoint *) b;
+
+ encode_actions (loc->owner, loc, &tdp_actions, &stepping_actions);
+ old_chain = make_cleanup (free_actions_list_cleanup_wrapper,
+ tdp_actions);
+ (void) make_cleanup (free_actions_list_cleanup_wrapper,
+ stepping_actions);
+
+ tpaddr = loc->address;
+ sprintf_vma (addrbuf, tpaddr);
+ sprintf (buf, "QTDP:%x:%s:%c:%lx:%x", b->number,
+ addrbuf, /* address */
+ (b->enable_state == bp_enabled ? 'E' : 'D'),
+ t->step_count, t->pass_count);
+ /* Fast tracepoints are mostly handled by the target, but we can
+ tell the target how big of an instruction block should be moved
+ around. */
+ if (b->type == bp_fast_tracepoint)
+ {
+ /* Only test for support at download time; we may not know
+ target capabilities at definition time. */
+ if (remote_supports_fast_tracepoints ())
{
- /* Only test for support at download time; we may not know
- target capabilities at definition time. */
- if (remote_supports_fast_tracepoints ())
- {
- int isize;
+ int isize;
- if (gdbarch_fast_tracepoint_valid_at (target_gdbarch,
- tpaddr, &isize, NULL))
- sprintf (buf + strlen (buf), ":F%x", isize);
- else
- /* If it passed validation at definition but fails now,
- something is very wrong. */
- internal_error (__FILE__, __LINE__,
- _("Fast tracepoint not "
- "valid during download"));
- }
+ if (gdbarch_fast_tracepoint_valid_at (target_gdbarch,
+ tpaddr, &isize, NULL))
+ sprintf (buf + strlen (buf), ":F%x", isize);
else
- /* Fast tracepoints are functionally identical to regular
- tracepoints, so don't take lack of support as a reason to
- give up on the trace run. */
- warning (_("Target does not support fast tracepoints, "
- "downloading %d as regular tracepoint"), t->number);
+ /* If it passed validation at definition but fails now,
+ something is very wrong. */
+ internal_error (__FILE__, __LINE__,
+ _("Fast tracepoint not "
+ "valid during download"));
}
- else if (t->type == bp_static_tracepoint)
+ else
+ /* Fast tracepoints are functionally identical to regular
+ tracepoints, so don't take lack of support as a reason to
+ give up on the trace run. */
+ warning (_("Target does not support fast tracepoints, "
+ "downloading %d as regular tracepoint"), b->number);
+ }
+ else if (b->type == bp_static_tracepoint)
+ {
+ /* Only test for support at download time; we may not know
+ target capabilities at definition time. */
+ if (remote_supports_static_tracepoints ())
{
- /* Only test for support at download time; we may not know
- target capabilities at definition time. */
- if (remote_supports_static_tracepoints ())
- {
- struct static_tracepoint_marker marker;
+ struct static_tracepoint_marker marker;
- if (target_static_tracepoint_marker_at (tpaddr, &marker))
- strcat (buf, ":S");
- else
- error (_("Static tracepoint not valid during download"));
- }
+ if (target_static_tracepoint_marker_at (tpaddr, &marker))
+ strcat (buf, ":S");
else
- /* Fast tracepoints are functionally identical to regular
- tracepoints, so don't take lack of support as a reason
- to give up on the trace run. */
- error (_("Target does not support static tracepoints"));
+ error (_("Static tracepoint not valid during download"));
}
- /* If the tracepoint has a conditional, make it into an agent
- expression and append to the definition. */
- if (loc->cond)
+ else
+ /* Fast tracepoints are functionally identical to regular
+ tracepoints, so don't take lack of support as a reason
+ to give up on the trace run. */
+ error (_("Target does not support static tracepoints"));
+ }
+ /* If the tracepoint has a conditional, make it into an agent
+ expression and append to the definition. */
+ if (loc->cond)
+ {
+ /* Only test support at download time, we may not know target
+ capabilities at definition time. */
+ if (remote_supports_cond_tracepoints ())
{
- /* Only test support at download time, we may not know target
- capabilities at definition time. */
- if (remote_supports_cond_tracepoints ())
- {
- aexpr = gen_eval_for_expr (tpaddr, loc->cond);
- aexpr_chain = make_cleanup_free_agent_expr (aexpr);
- sprintf (buf + strlen (buf), ":X%x,", aexpr->len);
- pkt = buf + strlen (buf);
- for (ndx = 0; ndx < aexpr->len; ++ndx)
- pkt = pack_hex_byte (pkt, aexpr->buf[ndx]);
- *pkt = '\0';
- do_cleanups (aexpr_chain);
- }
- else
- warning (_("Target does not support conditional tracepoints, "
- "ignoring tp %d cond"), t->number);
+ aexpr = gen_eval_for_expr (tpaddr, loc->cond);
+ aexpr_chain = make_cleanup_free_agent_expr (aexpr);
+ sprintf (buf + strlen (buf), ":X%x,", aexpr->len);
+ pkt = buf + strlen (buf);
+ for (ndx = 0; ndx < aexpr->len; ++ndx)
+ pkt = pack_hex_byte (pkt, aexpr->buf[ndx]);
+ *pkt = '\0';
+ do_cleanups (aexpr_chain);
}
+ else
+ warning (_("Target does not support conditional tracepoints, "
+ "ignoring tp %d cond"), b->number);
+ }
- if (t->commands || *default_collect)
- strcat (buf, "-");
- putpkt (buf);
- remote_get_noisy_reply (&target_buf, &target_buf_size);
- if (strcmp (target_buf, "OK"))
- error (_("Target does not support tracepoints."));
+ if (b->commands || *default_collect)
+ strcat (buf, "-");
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Target does not support tracepoints."));
- /* do_single_steps (t); */
- if (tdp_actions)
+ /* do_single_steps (t); */
+ if (tdp_actions)
+ {
+ for (ndx = 0; tdp_actions[ndx]; ndx++)
{
- for (ndx = 0; tdp_actions[ndx]; ndx++)
- {
- QUIT; /* Allow user to bail out with ^C. */
- sprintf (buf, "QTDP:-%x:%s:%s%c",
- t->number, addrbuf, /* address */
- tdp_actions[ndx],
- ((tdp_actions[ndx + 1] || stepping_actions)
- ? '-' : 0));
- putpkt (buf);
- remote_get_noisy_reply (&target_buf,
- &target_buf_size);
- if (strcmp (target_buf, "OK"))
- error (_("Error on target while setting tracepoints."));
- }
+ QUIT; /* Allow user to bail out with ^C. */
+ sprintf (buf, "QTDP:-%x:%s:%s%c",
+ b->number, addrbuf, /* address */
+ tdp_actions[ndx],
+ ((tdp_actions[ndx + 1] || stepping_actions)
+ ? '-' : 0));
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf,
+ &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Error on target while setting tracepoints."));
}
- if (stepping_actions)
+ }
+ if (stepping_actions)
+ {
+ for (ndx = 0; stepping_actions[ndx]; ndx++)
{
- for (ndx = 0; stepping_actions[ndx]; ndx++)
- {
- QUIT; /* Allow user to bail out with ^C. */
- sprintf (buf, "QTDP:-%x:%s:%s%s%s",
- t->number, addrbuf, /* address */
- ((ndx == 0) ? "S" : ""),
- stepping_actions[ndx],
- (stepping_actions[ndx + 1] ? "-" : ""));
- putpkt (buf);
- remote_get_noisy_reply (&target_buf,
- &target_buf_size);
- if (strcmp (target_buf, "OK"))
- error (_("Error on target while setting tracepoints."));
- }
+ QUIT; /* Allow user to bail out with ^C. */
+ sprintf (buf, "QTDP:-%x:%s:%s%s%s",
+ b->number, addrbuf, /* address */
+ ((ndx == 0) ? "S" : ""),
+ stepping_actions[ndx],
+ (stepping_actions[ndx + 1] ? "-" : ""));
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf,
+ &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Error on target while setting tracepoints."));
}
+ }
- if (remote_protocol_packets[PACKET_TracepointSource].support
- == PACKET_ENABLE)
+ if (remote_protocol_packets[PACKET_TracepointSource].support
+ == PACKET_ENABLE)
+ {
+ if (b->addr_string)
{
- if (t->addr_string)
- {
- strcpy (buf, "QTDPsrc:");
- encode_source_string (t->number, loc->address,
- "at", t->addr_string, buf + strlen (buf),
- 2048 - strlen (buf));
+ strcpy (buf, "QTDPsrc:");
+ encode_source_string (b->number, loc->address,
+ "at", b->addr_string, buf + strlen (buf),
+ 2048 - strlen (buf));
- putpkt (buf);
- remote_get_noisy_reply (&target_buf, &target_buf_size);
- if (strcmp (target_buf, "OK"))
- warning (_("Target does not support source download."));
- }
- if (t->cond_string)
- {
- strcpy (buf, "QTDPsrc:");
- encode_source_string (t->number, loc->address,
- "cond", t->cond_string, buf + strlen (buf),
- 2048 - strlen (buf));
- putpkt (buf);
- remote_get_noisy_reply (&target_buf, &target_buf_size);
- if (strcmp (target_buf, "OK"))
- warning (_("Target does not support source download."));
- }
- remote_download_command_source (t->number, loc->address,
- breakpoint_commands (t));
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ warning (_("Target does not support source download."));
}
-
- do_cleanups (old_chain);
+ if (b->cond_string)
+ {
+ strcpy (buf, "QTDPsrc:");
+ encode_source_string (b->number, loc->address,
+ "cond", b->cond_string, buf + strlen (buf),
+ 2048 - strlen (buf));
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ warning (_("Target does not support source download."));
+ }
+ remote_download_command_source (b->number, loc->address,
+ breakpoint_commands (b));
}
+
+ do_cleanups (old_chain);
+}
+
+static int
+remote_can_download_tracepoint (void)
+{
+ struct trace_status *ts = current_trace_status ();
+ int status = remote_get_trace_status (ts);
+
+ if (status == -1 || !ts->running_known || !ts->running)
+ return 0;
+
+ /* If we are in a tracing experiment, but remote stub doesn't support
+ installing tracepoint in trace, we have to return. */
+ if (!remote_supports_install_in_trace ())
+ return 0;
+
+ return 1;
}
+
static void
remote_download_trace_state_variable (struct trace_state_variable *tsv)
{
error (_("Error on target while downloading trace state variable."));
}
+static void
+remote_enable_tracepoint (struct bp_location *location)
+{
+ struct remote_state *rs = get_remote_state ();
+ char addr_buf[40];
+
+ sprintf_vma (addr_buf, location->address);
+ sprintf (rs->buf, "QTEnable:%x:%s", location->owner->number, addr_buf);
+ putpkt (rs->buf);
+ remote_get_noisy_reply (&rs->buf, &rs->buf_size);
+ if (*rs->buf == '\0')
+ error (_("Target does not support enabling tracepoints while a trace run is ongoing."));
+ if (strcmp (rs->buf, "OK") != 0)
+ error (_("Error on target while enabling tracepoint."));
+}
+
+static void
+remote_disable_tracepoint (struct bp_location *location)
+{
+ struct remote_state *rs = get_remote_state ();
+ char addr_buf[40];
+
+ sprintf_vma (addr_buf, location->address);
+ sprintf (rs->buf, "QTDisable:%x:%s", location->owner->number, addr_buf);
+ putpkt (rs->buf);
+ remote_get_noisy_reply (&rs->buf, &rs->buf_size);
+ if (*rs->buf == '\0')
+ error (_("Target does not support disabling tracepoints while a trace run is ongoing."));
+ if (strcmp (rs->buf, "OK") != 0)
+ error (_("Error on target while disabling tracepoint."));
+}
+
static void
remote_trace_set_readonly_regions (void)
{
bfd_size_type size;
bfd_vma vma;
int anysecs = 0;
+ int offset = 0;
if (!exec_bfd)
return; /* No information to give. */
for (s = exec_bfd->sections; s; s = s->next)
{
char tmp1[40], tmp2[40];
+ int sec_length;
if ((s->flags & SEC_LOAD) == 0 ||
/* (s->flags & SEC_CODE) == 0 || */
size = bfd_get_section_size (s);
sprintf_vma (tmp1, vma);
sprintf_vma (tmp2, vma + size);
- sprintf (target_buf + strlen (target_buf),
- ":%s,%s", tmp1, tmp2);
+ sec_length = 1 + strlen (tmp1) + 1 + strlen (tmp2);
+ if (offset + sec_length + 1 > target_buf_size)
+ {
+ if (remote_protocol_packets[PACKET_qXfer_traceframe_info].support
+ != PACKET_ENABLE)
+ warning (_("\
+Too many sections for read-only sections definition packet."));
+ break;
+ }
+ sprintf (target_buf + offset, ":%s,%s", tmp1, tmp2);
+ offset += sec_length;
}
if (anysecs)
{
static int
remote_get_trace_status (struct trace_status *ts)
{
- char *p;
+ /* Initialize it just to avoid a GCC false warning. */
+ char *p = NULL;
/* FIXME we need to get register block size some other way. */
extern int trace_regblock_size;
+ volatile struct gdb_exception ex;
trace_regblock_size = get_remote_arch_state ()->sizeof_g_packet;
putpkt ("qTStatus");
- p = remote_get_noisy_reply (&target_buf, &target_buf_size);
+
+ TRY_CATCH (ex, RETURN_MASK_ERROR)
+ {
+ p = remote_get_noisy_reply (&target_buf, &target_buf_size);
+ }
+ if (ex.reason < 0)
+ {
+ exception_fprintf (gdb_stderr, ex, "qTStatus: ");
+ return -1;
+ }
/* If the remote target doesn't do tracing, flag it. */
if (*p == '\0')
char *p, *reply;
int target_frameno = -1, target_tracept = -1;
+ /* Lookups other than by absolute frame number depend on the current
+ trace selected, so make sure it is correct on the remote end
+ first. */
+ if (type != tfind_number)
+ set_remote_traceframe ();
+
p = rs->buf;
strcpy (p, "QTFrame:");
p = strchr (p, '\0');
target_frameno = (int) strtol (p, &reply, 16);
if (reply == p)
error (_("Unable to parse trace frame number"));
+ /* Don't update our remote traceframe number cache on failure
+ to select a remote traceframe. */
if (target_frameno == -1)
return -1;
break;
}
if (tpp)
*tpp = target_tracept;
+
+ remote_traceframe_number = target_frameno;
return target_frameno;
}
char *reply;
ULONGEST uval;
+ set_remote_traceframe ();
+
sprintf (rs->buf, "qTV:%x", tsvnum);
putpkt (rs->buf);
reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
*p++ = '\0';
putpkt (rs->buf);
reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
- if (*reply != '\0')
+ if (*reply == '\0')
error (_("Target does not support this command."));
if (strcmp (reply, "OK") != 0)
error (_("Bogus reply from target: %s"), reply);
error (_("Bogus reply from target: %s"), reply);
}
+static struct traceframe_info *
+remote_traceframe_info (void)
+{
+ char *text;
+
+ text = target_read_stralloc (¤t_target,
+ TARGET_OBJECT_TRACEFRAME_INFO, NULL);
+ if (text != NULL)
+ {
+ struct traceframe_info *info;
+ struct cleanup *back_to = make_cleanup (xfree, text);
+
+ info = parse_traceframe_info (text);
+ do_cleanups (back_to);
+ return info;
+ }
+
+ return NULL;
+}
+
+/* Handle the qTMinFTPILen packet. Returns the minimum length of
+ instruction on which a fast tracepoint may be placed. Returns -1
+ if the packet is not supported, and 0 if the minimum instruction
+ length is unknown. */
+
+static int
+remote_get_min_fast_tracepoint_insn_len (void)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *reply;
+
+ sprintf (rs->buf, "qTMinFTPILen");
+ putpkt (rs->buf);
+ reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (*reply == '\0')
+ return -1;
+ else
+ {
+ ULONGEST min_insn_len;
+
+ unpack_varlen_hex (reply, &min_insn_len);
+
+ return (int) min_insn_len;
+ }
+}
+
static void
init_remote_ops (void)
{
remote_ops.to_can_use_hw_breakpoint = remote_check_watch_resources;
remote_ops.to_insert_hw_breakpoint = remote_insert_hw_breakpoint;
remote_ops.to_remove_hw_breakpoint = remote_remove_hw_breakpoint;
+ remote_ops.to_region_ok_for_hw_watchpoint
+ = remote_region_ok_for_hw_watchpoint;
remote_ops.to_insert_watchpoint = remote_insert_watchpoint;
remote_ops.to_remove_watchpoint = remote_remove_watchpoint;
remote_ops.to_kill = remote_kill;
remote_ops.to_load = generic_load;
remote_ops.to_mourn_inferior = remote_mourn;
- remote_ops.to_notice_signals = remote_notice_signals;
+ remote_ops.to_pass_signals = remote_pass_signals;
remote_ops.to_thread_alive = remote_thread_alive;
remote_ops.to_find_new_threads = remote_threads_info;
remote_ops.to_pid_to_str = remote_pid_to_str;
remote_ops.to_can_async_p = remote_can_async_p;
remote_ops.to_is_async_p = remote_is_async_p;
remote_ops.to_async = remote_async;
- remote_ops.to_async_mask = remote_async_mask;
remote_ops.to_terminal_inferior = remote_terminal_inferior;
remote_ops.to_terminal_ours = remote_terminal_ours;
remote_ops.to_supports_non_stop = remote_supports_non_stop;
remote_ops.to_supports_multi_process = remote_supports_multi_process;
+ remote_ops.to_supports_disable_randomization
+ = remote_supports_disable_randomization;
+ remote_ops.to_supports_enable_disable_tracepoint = remote_supports_enable_disable_tracepoint;
+ remote_ops.to_supports_string_tracing = remote_supports_string_tracing;
remote_ops.to_trace_init = remote_trace_init;
remote_ops.to_download_tracepoint = remote_download_tracepoint;
+ remote_ops.to_can_download_tracepoint = remote_can_download_tracepoint;
remote_ops.to_download_trace_state_variable
= remote_download_trace_state_variable;
+ remote_ops.to_enable_tracepoint = remote_enable_tracepoint;
+ remote_ops.to_disable_tracepoint = remote_disable_tracepoint;
remote_ops.to_trace_set_readonly_regions = remote_trace_set_readonly_regions;
remote_ops.to_trace_start = remote_trace_start;
remote_ops.to_get_trace_status = remote_get_trace_status;
remote_ops.to_upload_trace_state_variables
= remote_upload_trace_state_variables;
remote_ops.to_get_raw_trace_data = remote_get_raw_trace_data;
+ remote_ops.to_get_min_fast_tracepoint_insn_len = remote_get_min_fast_tracepoint_insn_len;
remote_ops.to_set_disconnected_tracing = remote_set_disconnected_tracing;
remote_ops.to_set_circular_trace_buffer = remote_set_circular_trace_buffer;
remote_ops.to_core_of_thread = remote_core_of_thread;
= remote_static_tracepoint_marker_at;
remote_ops.to_static_tracepoint_markers_by_strid
= remote_static_tracepoint_markers_by_strid;
+ remote_ops.to_traceframe_info = remote_traceframe_info;
}
/* Set up the extended remote vector by making a copy of the standard
extended_remote_ops.to_detach = extended_remote_detach;
extended_remote_ops.to_attach = extended_remote_attach;
extended_remote_ops.to_kill = extended_remote_kill;
+ extended_remote_ops.to_supports_disable_randomization
+ = extended_remote_supports_disable_randomization;
}
static int
return 0;
/* We're async whenever the serial device is. */
- return remote_async_mask_value && serial_can_async_p (remote_desc);
+ return serial_can_async_p (remote_desc);
}
static int
return 0;
/* We're async whenever the serial device is. */
- return remote_async_mask_value && serial_is_async_p (remote_desc);
+ return serial_is_async_p (remote_desc);
}
/* Pass the SERIAL event on and up to the client. One day this code
remote_async (void (*callback) (enum inferior_event_type event_type,
void *context), void *context)
{
- if (remote_async_mask_value == 0)
- internal_error (__FILE__, __LINE__,
- _("Calling remote_async when async is masked"));
-
if (callback != NULL)
{
serial_async (remote_desc, remote_async_serial_handler, NULL);
serial_async (remote_desc, NULL, NULL);
}
-static int
-remote_async_mask (int new_mask)
-{
- int curr_mask = remote_async_mask_value;
-
- remote_async_mask_value = new_mask;
- return curr_mask;
-}
-
static void
set_remote_cmd (char *args, int from_tty)
{
the redundant "show remote Z-packet" and the legacy aliases. */
struct cleanup *showlist_chain;
struct cmd_list_element *list = remote_show_cmdlist;
+ struct ui_out *uiout = current_uiout;
showlist_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "showlist");
for (; list != NULL; list = list->next)
sigint_remote_token =
create_async_signal_handler (async_remote_interrupt, NULL);
sigint_remote_twice_token =
- create_async_signal_handler (inferior_event_handler_wrapper, NULL);
+ create_async_signal_handler (async_remote_interrupt_twice, NULL);
#if 0
init_remote_threadtests ();
number of target hardware
watchpoints is %s. */
&remote_set_cmdlist, &remote_show_cmdlist);
+ add_setshow_zinteger_cmd ("hardware-watchpoint-length-limit", no_class,
+ &remote_hw_watchpoint_length_limit, _("\
+Set the maximum length (in bytes) of a target hardware watchpoint."), _("\
+Show the maximum length (in bytes) of a target hardware watchpoint."), _("\
+Specify a negative limit for unlimited."),
+ NULL, NULL, /* FIXME: i18n: The maximum
+ length (in bytes) of a target
+ hardware watchpoint is %s. */
+ &remote_set_cmdlist, &remote_show_cmdlist);
add_setshow_zinteger_cmd ("hardware-breakpoint-limit", no_class,
&remote_hw_breakpoint_limit, _("\
Set the maximum number of target hardware breakpoints."), _("\
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_siginfo_write],
"qXfer:siginfo:write", "write-siginfo-object", 0);
+ add_packet_config_cmd
+ (&remote_protocol_packets[PACKET_qXfer_traceframe_info],
+ "qXfer:trace-frame-info:read", "traceframe-info", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qGetTLSAddr],
"qGetTLSAddr", "get-thread-local-storage-address",
0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_StaticTracepoints],
"StaticTracepoints", "static-tracepoints", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_InstallInTrace],
+ "InstallInTrace", "install-in-trace", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_statictrace_read],
"qXfer:statictrace:read", "read-sdata-object", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_fdpic],
+ "qXfer:fdpic:read", "read-fdpic-loadmap", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_QDisableRandomization],
+ "QDisableRandomization", "disable-randomization", 0);
+
/* Keep the old ``set remote Z-packet ...'' working. Each individual
Z sub-packet has its own set and show commands, but users may
have sets to this variable in their .gdbinit files (or in their