#include "gdb-stabs.h"
#include "dcache.h"
-#include "remote-utils.h"
#if !defined(DONT_USE_REMOTE)
#ifdef USG
readchar PARAMS ((void));
static int
-remote_wait PARAMS ((WAITTYPE *status));
+remote_wait PARAMS ((int pid, WAITTYPE *status));
static int
tohex PARAMS ((int nib));
static void
remote_interrupt_twice PARAMS ((int signo));
+static void
+interrupt_query PARAMS ((void));
+
extern struct target_ops remote_ops; /* Forward decl */
/* This was 5 seconds, which is a long time to sit and wait.
starts. */
serial_t remote_desc = NULL;
-#define PBUFSIZ 1024
+/* Having this larger than 400 causes us to be incompatible with m68k-stub.c
+ and i386-stub.c. Normally, no one would notice because it only matters
+ for writing large chunks of memory (e.g. in downloads). Also, this needs
+ to be more than 400 if required to hold the registers (see below, where
+ we round it up based on REGISTER_BYTES). */
+#define PBUFSIZ 400
/* Maximum number of bytes to read/write at once. The value here
is chosen to fill up a packet (the headers account for the 32). */
if (!remote_desc)
perror_with_name (name);
- if (SERIAL_SETBAUDRATE (remote_desc, sr_get_baud_rate()))
+ if (SERIAL_SETBAUDRATE (remote_desc, baud_rate))
{
SERIAL_CLOSE (remote_desc);
perror_with_name (name);
/* If this doesn't work, try more severe steps. */
signal (signo, remote_interrupt_twice);
- if (sr_get_debug ())
- printf ("remote_interrupt called\n");
+ if (remote_debug)
+ printf_unfiltered ("remote_interrupt called\n");
SERIAL_WRITE (remote_desc, "\003", 1); /* Send a ^C */
}
{
signal (signo, ofunc);
+ interrupt_query ();
+
+ signal (signo, remote_interrupt);
+}
+
+/* Ask the user what to do when an interrupt is received. */
+
+static void
+interrupt_query ()
+{
target_terminal_ours ();
+
if (query ("Interrupted while waiting for the program.\n\
Give up (and stop debugging it)? "))
{
target_mourn_inferior ();
return_to_top_level (RETURN_QUIT);
}
- else
- {
- signal (signo, remote_interrupt);
- target_terminal_inferior ();
- }
+
+ target_terminal_inferior ();
}
/* Wait until the remote machine stops, then return,
means in the case of this target). */
static int
-remote_wait (status)
+remote_wait (pid, status)
+ int pid;
WAITTYPE *status;
{
unsigned char buf[PBUFSIZ];
new data address, and BB is the new bss address. This is
used by the NLM stub; gdb may see more sections. */
p = &buf[3];
- text_addr = strtol (p, &p1, 16);
+ text_addr = strtoul (p, &p1, 16);
if (p1 == p || *p1 != ';')
warning ("Malformed relocation packet: Packet '%s'", buf);
p = p1 + 1;
- data_addr = strtol (p, &p1, 16);
+ data_addr = strtoul (p, &p1, 16);
if (p1 == p || *p1 != ';')
warning ("Malformed relocation packet: Packet '%s'", buf);
p = p1 + 1;
- bss_addr = strtol (p, &p1, 16);
+ bss_addr = strtoul (p, &p1, 16);
if (p1 == p)
warning ("Malformed relocation packet: Packet '%s'", buf);
- if (symfile_objfile != NULL)
+ if (symfile_objfile != NULL
+ && (ANOFFSET (symfile_objfile->section_offsets,
+ SECT_OFF_TEXT) != text_addr
+ || ANOFFSET (symfile_objfile->section_offsets,
+ SECT_OFF_DATA) != data_addr
+ || ANOFFSET (symfile_objfile->section_offsets,
+ SECT_OFF_BSS) != bss_addr))
{
struct section_offsets *offs;
stuff. (Just what does "text" as seen by the stub
mean, anyway?). */
- /* FIXME: Why don't the various symfile_offsets routines
- in the sym_fns vectors set this?
- (no good reason -kingdon). */
- if (symfile_objfile->num_sections == 0)
- symfile_objfile->num_sections = SECT_OFF_MAX;
-
offs = ((struct section_offsets *)
alloca (sizeof (struct section_offsets)
+ (symfile_objfile->num_sections
ANOFFSET (offs, SECT_OFF_BSS) = bss_addr;
objfile_relocate (symfile_objfile, offs);
+ {
+ struct obj_section *s;
+ bfd *abfd;
+
+ abfd = symfile_objfile->obfd;
+
+ for (s = symfile_objfile->sections;
+ s < symfile_objfile->sections_end; ++s)
+ {
+ flagword flags;
+
+ flags = bfd_get_section_flags (abfd, s->sec_ptr);
+
+ if (flags & SEC_CODE)
+ {
+ s->addr += text_addr;
+ s->endaddr += text_addr;
+ }
+ else if (flags & (SEC_DATA | SEC_LOAD))
+ {
+ s->addr += data_addr;
+ s->endaddr += data_addr;
+ }
+ else if (flags & SEC_ALLOC)
+ {
+ s->addr += bss_addr;
+ s->endaddr += bss_addr;
+ }
+ }
+ }
}
break;
}
/* Unimplemented registers read as all bits zero. */
memset (regs, 0, REGISTER_BYTES);
+ /* We can get out of synch in various cases. If the first character
+ in the buffer is not a hex character, assume that has happened
+ and try to fetch another packet to read. */
+ while ((buf[0] < '0' || buf[0] > '9')
+ && (buf[0] < 'a' || buf[0] > 'f'))
+ {
+ if (remote_debug)
+ printf_unfiltered ("Bad register packet; fetching a new packet\n");
+ getpkt (buf, 0);
+ }
+
/* Reply describes registers byte by byte, each byte encoded as two
hex characters. Suck them all up, then supply them to the
register cacheing/storage mechanism. */
int i;
char *p;
- if (len > PBUFSIZ / 2 - 20)
- abort ();
-
sprintf (buf, "M%x,%x:", memaddr, len);
/* We send target system values byte by byte, in increasing byte addresses,
while (1)
{
- if (sr_get_debug ())
+ if (remote_debug)
{
*p = '\0';
- printf ("Sending packet: %s...", buf2); fflush(stdout);
+ printf_unfiltered ("Sending packet: %s...", buf2); gdb_flush(gdb_stdout);
}
if (SERIAL_WRITE (remote_desc, buf2, p - buf2))
perror_with_name ("putpkt: write failed");
switch (ch)
{
case '+':
- if (sr_get_debug ())
- printf("Ack\n");
+ if (remote_debug)
+ printf_unfiltered("Ack\n");
return;
case SERIAL_TIMEOUT:
break; /* Retransmit buffer */
case SERIAL_EOF:
error ("putpkt: EOF while trying to read ACK");
default:
- if (sr_get_debug ())
- printf ("%02X %c ", ch&0xFF, ch);
+ if (remote_debug)
+ printf_unfiltered ("%02X %c ", ch&0xFF, ch);
continue;
}
break; /* Here to retransmit */
}
+
+ if (quit_flag)
+ {
+ quit_flag = 0;
+ interrupt_query ();
+ }
}
}
while (1)
{
+ if (quit_flag)
+ {
+ quit_flag = 0;
+ interrupt_query ();
+ }
+
/* This can loop forever if the remote side sends us characters
continuously, but if it pauses, we'll get a zero from readchar
because of timeout. Then we'll count that as a retry. */
if (forever)
continue;
if (++retries >= MAX_RETRIES)
- if (sr_get_debug ()) puts_filtered ("Timed out.\n");
+ if (remote_debug) puts_filtered ("Timed out.\n");
goto out;
}
c = readchar ();
if (c == SERIAL_TIMEOUT)
{
- if (sr_get_debug ())
+ if (remote_debug)
puts_filtered ("Timeout in mid-packet, retrying\n");
goto whole; /* Start a new packet, count retries */
}
if (c == '$')
{
- if (sr_get_debug ())
+ if (remote_debug)
puts_filtered ("Saw new packet start in middle of old one\n");
goto whole; /* Start a new packet, count retries */
}
}
else
{
- printf ("Ignoring packet error, continuing...\n");
+ printf_unfiltered ("Ignoring packet error, continuing...\n");
break;
}
}
SERIAL_WRITE (remote_desc, "+", 1);
- if (sr_get_debug ())
- fprintf (stderr,"Packet received: %s\n", buf);
+ if (remote_debug)
+ fprintf_unfiltered (gdb_stderr,"Packet received: %s\n", buf);
}
\f
static void
NULL, /* sections_end */
OPS_MAGIC /* to_magic */
};
+#endif /* Use remote. */
void
_initialize_remote ()
{
+#if !defined(DONT_USE_REMOTE)
add_target (&remote_ops);
-}
#endif
+}
projects / deliverable / binutils-gdb.git / blobdiff