#include <fcntl.h>
#include "frame.h"
#include "inferior.h"
+#include "symfile.h"
#include "target.h"
#include "wait.h"
#include "terminal.h"
#endif
#include <signal.h>
+#include "serial.h"
/* Prototypes for local functions */
static void
remote_detach PARAMS ((char *, int));
-
extern struct target_ops remote_ops; /* Forward decl */
static int kiodebug = 0;
-static int timeout = 5;
+/* This was 5 seconds, which is a long time to sit and wait.
+ Unless this is going though some terminal server or multiplexer or
+ other form of hairy serial connection, I would think 2 seconds would
+ be plenty. */
+static int timeout = 2;
#if 0
int icache;
/* Descriptor for I/O to remote machine. Initialize it to -1 so that
remote_open knows that we don't have a file open when the program
starts. */
-int remote_desc = -1;
+serial_t remote_desc = NULL;
#define PBUFSIZ 1024
#define PBUFSIZ (REGISTER_BYTES * 2 + 32)
#endif
\f
-/* Called when SIGALRM signal sent due to alarm() timeout. */
-#ifndef HAVE_TERMIO
-void
-remote_timer (signo)
- int signo;
-{
- if (kiodebug)
- printf ("remote_timer called\n");
-
- alarm (timeout);
-}
-#endif
-
/* Clean up connection to a remote debugger. */
/* ARGSUSED */
remote_close (quitting)
int quitting;
{
- if (remote_desc >= 0)
- close (remote_desc);
- remote_desc = -1;
-}
-
-/* Translate baud rates from integers to damn B_codes. Unix should
- have outgrown this crap years ago, but even POSIX wouldn't buck it. */
-
-#ifndef B19200
-#define B19200 EXTA
-#endif
-#ifndef B38400
-#define B38400 EXTB
-#endif
-
-
-
-static struct {int rate, damn_b;} baudtab[] = {
- {0, B0},
- {50, B50},
- {75, B75},
- {110, B110},
- {134, B134},
- {150, B150},
- {200, B200},
- {300, B300},
- {600, B600},
- {1200, B1200},
- {1800, B1800},
- {2400, B2400},
- {4800, B4800},
- {9600, B9600},
- {19200, B19200},
- {38400, B38400},
- {-1, -1},
-};
-
-static int
-damn_b (rate)
- int rate;
-{
- int i;
-
- for (i = 0; baudtab[i].rate != -1; i++)
- if (rate == baudtab[i].rate) return baudtab[i].damn_b;
- return B38400; /* Random */
+ if (remote_desc)
+ SERIAL_CLOSE (remote_desc);
+ remote_desc = NULL;
}
/* Stub for catch_errors. */
char *dummy;
{
/* Ack any packet which the remote side has already sent. */
- write (remote_desc, "+\r", 2);
+ SERIAL_WRITE (remote_desc, "+\r", 2);
putpkt ("?"); /* initiate a query from remote machine */
start_remote (); /* Initialize gdb process mechanisms */
char *name;
int from_tty;
{
- TERMINAL sg;
- int a_rate, b_rate = 0;
- int baudrate_set = 0;
-
if (name == 0)
error (
"To open a remote debug connection, you need to specify what serial\n\
target_preopen (from_tty);
- remote_close (0);
+ unpush_target (&remote_ops);
#if 0
dcache_init ();
#endif
- remote_desc = open (name, O_RDWR);
- if (remote_desc < 0)
+ remote_desc = SERIAL_OPEN (name);
+ if (!remote_desc)
perror_with_name (name);
if (baud_rate)
{
- if (sscanf (baud_rate, "%d", &a_rate) == 1)
- {
- b_rate = damn_b (a_rate);
- baudrate_set = 1;
- }
- }
+ int rate;
- ioctl (remote_desc, TIOCGETP, &sg);
-#ifdef HAVE_TERMIO
- sg.c_cc[VMIN] = 0; /* read with timeout. */
- sg.c_cc[VTIME] = timeout * 10;
- sg.c_lflag &= ~(ICANON | ECHO);
- sg.c_cflag &= ~PARENB; /* No parity */
- sg.c_cflag |= CS8; /* 8-bit path */
- if (baudrate_set)
- sg.c_cflag = (sg.c_cflag & ~CBAUD) | b_rate;
-#else
- sg.sg_flags |= RAW | ANYP;
- sg.sg_flags &= ~ECHO;
- if (baudrate_set)
- {
- sg.sg_ispeed = b_rate;
- sg.sg_ospeed = b_rate;
+ if (sscanf (baud_rate, "%d", &rate) == 1)
+ if (SERIAL_SETBAUDRATE (remote_desc, rate))
+ {
+ SERIAL_CLOSE (remote_desc);
+ perror_with_name (name);
+ }
}
-#endif
- ioctl (remote_desc, TIOCSETP, &sg);
+
+ SERIAL_RAW (remote_desc);
if (from_tty)
{
}
push_target (&remote_ops); /* Switch to using remote target now */
-#ifndef HAVE_TERMIO
-#ifndef NO_SIGINTERRUPT
- /* Cause SIGALRM's to make reads fail. */
- if (siginterrupt (SIGALRM, 1) != 0)
- perror ("remote_open: error in siginterrupt");
-#endif
-
- /* Set up read timeout timer. */
- if ((void (*)()) signal (SIGALRM, remote_timer) == (void (*)()) -1)
- perror ("remote_open: error in signal");
-#endif
-
/* Start the remote connection; if error (0), discard this target. */
immediate_quit++; /* Allow user to interrupt it */
if (!catch_errors (remote_start_remote, (char *)0,
char buf[PBUFSIZ];
if (siggnal)
- error ("Can't send signals to a remote system. Try `handle %d ignore'.",
- siggnal);
+ {
+ char *name;
+ target_terminal_ours_for_output ();
+ printf_filtered ("Can't send signals to a remote system. ");
+ name = strsigno (siggnal);
+ if (name)
+ printf_filtered (name);
+ else
+ printf_filtered ("Signal %d", siggnal);
+ printf_filtered (" not sent.\n");
+ target_terminal_inferior ();
+ }
#if 0
dcache_flush ();
putpkt (buf);
}
+\f
+static void remote_interrupt_twice PARAMS ((int));
+static void (*ofunc)();
/* Send ^C to target to halt it. Target will respond, and send us a
packet. */
void remote_interrupt(signo)
int signo;
{
+ /* If this doesn't work, try more severe steps. */
+ signal (signo, remote_interrupt_twice);
if (kiodebug)
printf ("remote_interrupt called\n");
- write (remote_desc, "\003", 1); /* Send a ^C */
+ SERIAL_WRITE (remote_desc, "\003", 1); /* Send a ^C */
}
+/* The user typed ^C twice. */
+static void
+remote_interrupt_twice (signo)
+ int signo;
+{
+ signal (signo, ofunc);
+
+ target_terminal_ours ();
+ if (query ("Interrupted while waiting for the program.\n\
+Give up (and stop debugging it)? "))
+ {
+ target_mourn_inferior ();
+ return_to_top_level ();
+ }
+ else
+ {
+ signal (signo, remote_interrupt);
+ target_terminal_inferior ();
+ }
+}
/* Wait until the remote machine stops, then return,
storing status in STATUS just as `wait' would.
WAITTYPE *status;
{
unsigned char buf[PBUFSIZ];
- void (*ofunc)();
unsigned char *p;
int i;
long regno;
*/
-/* Read a single character from the remote end.
- (If supported, we actually read many characters and buffer them up.)
- Timeouts cause a zero (nul) to be returned. */
+/* Read a single character from the remote end, masking it down to 7 bits. */
static int
readchar ()
{
- static int inbuf_index, inbuf_count;
-#define INBUFSIZE PBUFSIZ
- static char inbuf[INBUFSIZE];
- struct cleanup *old_chain;
+ int ch;
- if (inbuf_index >= inbuf_count)
- {
-#ifndef HAVE_TERMIO
- extern int alarm ();
-#endif
+ ch = SERIAL_READCHAR (remote_desc, timeout);
- /* Time to do another read... */
- inbuf_index = 0;
- inbuf_count = 0;
- inbuf[0] = 0; /* Just in case */
-#ifdef HAVE_TERMIO
- /* termio does the timeout for us. */
- inbuf_count = read (remote_desc, inbuf, INBUFSIZE);
-#else
- /* Cancel alarm on error. */
- old_chain = make_cleanup (alarm, (char *)0);
- alarm (timeout);
- inbuf_count = read (remote_desc, inbuf, INBUFSIZE);
- do_cleanups (old_chain); /* Cancel the alarm now. */
-#endif
- }
+ if (ch < 0)
+ return ch;
- /* Just return the next character from the buffer (or a zero if we
- got an error and no chars were stored in inbuf). */
- return inbuf[inbuf_index++] & 0x7f;
+ return ch & 0x7f;
}
/* Send the command in BUF to the remote machine,
unsigned char csum = 0;
char buf2[PBUFSIZ];
int cnt = strlen (buf);
- char ch;
+ int ch;
char *p;
/* Copy the packet into buffer BUF2, encapsulating it
/* Send it over and over until we get a positive ack. */
- do {
- if (kiodebug)
- {
- *p = '\0';
- printf ("Sending packet: %s...", buf2); fflush(stdout);
- }
- write (remote_desc, buf2, p - buf2);
-
- /* read until either a timeout occurs (\0) or '+' is read */
- do {
- ch = readchar ();
- if (kiodebug) {
- if (ch == '+')
- printf("Ack\n");
- else
- printf ("%02X%c ", ch&0xFF, ch);
- }
- } while ((ch != '+') && (ch != '\0'));
- } while (ch != '+');
+ while (1)
+ {
+ if (kiodebug)
+ {
+ *p = '\0';
+ printf ("Sending packet: %s...", buf2); fflush(stdout);
+ }
+ if (SERIAL_WRITE (remote_desc, buf2, p - buf2))
+ perror_with_name ("putpkt: write failed");
+
+ /* read until either a timeout occurs (-2) or '+' is read */
+ while (1)
+ {
+ ch = readchar ();
+
+ switch (ch)
+ {
+ case '+':
+ if (kiodebug)
+ printf("Ack\n");
+ return;
+ case SERIAL_TIMEOUT:
+ break; /* Retransmit buffer */
+ case SERIAL_ERROR:
+ perror_with_name ("putpkt: couldn't read ACK");
+ case SERIAL_EOF:
+ error ("putpkt: EOF while trying to read ACK");
+ default:
+ if (kiodebug)
+ printf ("%02X %c ", ch&0xFF, ch);
+ continue;
+ }
+ break; /* Here to retransmit */
+ }
+ }
}
/* Read a packet from the remote machine, with error checking,
static void
getpkt (buf, forever)
char *buf;
+ int forever;
{
char *bp;
unsigned char csum;
int retries = 0;
#define MAX_RETRIES 10
-#if 0
- /* Sorry, this will cause all hell to break loose, i.e. we'll end
- up in the command loop with an inferior, but (at least if this
- happens in remote_wait or some such place) without a current_frame,
- having set up prev_* in wait_for_inferior, etc.
-
- If it is necessary to have such an "emergency exit", seems like
- the only plausible thing to do is to say the inferior died, and
- make the user reattach if they want to. Perhaps with a prompt
- asking for confirmation. */
-
- /* allow immediate quit while reading from device, it could be hung */
- immediate_quit++;
-#endif /* 0 */
-
while (1)
{
/* This can loop forever if the remote side sends us characters
continuously, but if it pauses, we'll get a zero from readchar
because of timeout. Then we'll count that as a retry. */
- while (c != '$')
- if (0 == (c = readchar()))
- if (!forever)
- {
- if (++retries >= MAX_RETRIES)
- if (kiodebug) puts_filtered ("Timed out.\n");
- goto out;
- }
+
+ c = readchar();
+ if (c > 0 && c != '$')
+ continue;
+
+ if (c == SERIAL_TIMEOUT)
+ {
+ if (forever)
+ continue;
+ if (++retries >= MAX_RETRIES)
+ if (kiodebug) puts_filtered ("Timed out.\n");
+ goto out;
+ }
+
+ if (c == SERIAL_EOF)
+ error ("Remote connection closed");
+ if (c == SERIAL_ERROR)
+ perror_with_name ("Remote communication error");
/* Force csum to be zero here because of possible error retry. */
csum = 0;
while (1)
{
c = readchar ();
- if (c == '\0')
+ if (c == SERIAL_TIMEOUT)
{
if (kiodebug)
puts_filtered ("Timeout in mid-packet, retrying\n");
whole:
if (++retries < MAX_RETRIES)
{
- write (remote_desc, "-", 1);
+ SERIAL_WRITE (remote_desc, "-", 1);
}
else
{
out:
-#if 0
- immediate_quit--;
-#endif
-
- write (remote_desc, "+", 1);
+ SERIAL_WRITE (remote_desc, "+", 1);
if (kiodebug)
fprintf (stderr,"Packet received: %s\n", buf);
insque (db, &dcache_free);
}
#endif /* 0 */
+\f
+static void
+remote_kill ()
+{
+ putpkt ("k");
+ /* Don't wait for it to die. I'm not really sure it matters whether
+ we do or not. For the existing stubs, kill is a noop. */
+ target_mourn_inferior ();
+}
+static void
+remote_mourn ()
+{
+ unpush_target (&remote_ops);
+ generic_mourn_inferior ();
+}
+\f
/* Define the target subroutine names */
struct target_ops remote_ops = {
NULL, /* to_terminal_ours_for_output */
NULL, /* to_terminal_ours */
NULL, /* to_terminal_info */
- NULL, /* to_kill */
- NULL, /* to_load */
+ remote_kill, /* to_kill */
+ generic_load, /* to_load */
NULL, /* to_lookup_symbol */
NULL, /* to_create_inferior */
- NULL, /* to_mourn_inferior */
+ remote_mourn, /* to_mourn_inferior */
0, /* to_can_run */
0, /* to_notice_signals */
process_stratum, /* to_stratum */