/* Remote target communications for serial-line targets in custom GDB protocol
- Copyright 1988, 1991, 1992, 1993, 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
+ Copyright 1988, 91, 92, 93, 94, 95, 96, 97, 1998
+ Free Software Foundation, Inc.
This file is part of GDB.
resume at same address.
continue with Csig;AA..AA Continue with signal sig (hex signal
- signal number). If ;AA..AA is omitted, resume
- at same address.
+ signal number). If ;AA..AA is omitted,
+ resume at same address.
step with Ssig;AA..AA Like 'C' but step not continue.
signal
or... XAA The process terminated with signal
AA.
or... OXX..XX XX..XX is hex encoding of ASCII data. This
- can happen at any time while the program is
- running and the debugger should
- continue to wait for 'W', 'T', etc.
+ can happen at any time while the
+ program is running and the debugger
+ should continue to wait for
+ 'W', 'T', etc.
thread alive TXX Find out if the thread XX is alive.
reply OK thread is still alive
static void remote_files_info PARAMS ((struct target_ops *ignore));
-static int remote_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
+static int remote_xfer_memory PARAMS ((CORE_ADDR memaddr, char * myaddr,
int len, int should_write,
- struct target_ops *target));
+ struct target_ops * target));
static void remote_prepare_to_store PARAMS ((void));
static void remote_resume PARAMS ((int pid, int step,
enum target_signal siggnal));
-static int remote_start_remote PARAMS ((char *dummy));
+static int remote_start_remote PARAMS ((PTR));
static void remote_open PARAMS ((char *name, int from_tty));
static void extended_remote_open PARAMS ((char *name, int from_tty));
-static void remote_open_1 PARAMS ((char *, int, struct target_ops *, int extended_p));
+static void remote_open_1 PARAMS ((char *, int, struct target_ops *,
+ int extended_p));
static void remote_close PARAMS ((int quitting));
static int readchar PARAMS ((int timeout));
-static int remote_wait PARAMS ((int pid, struct target_waitstatus *status));
+static int remote_wait PARAMS ((int pid, struct target_waitstatus * status));
static void remote_kill PARAMS ((void));
static void remote_interrupt PARAMS ((int signo));
-static void remote_interrupt_twice PARAMS ((int signo));
-
static void interrupt_query PARAMS ((void));
static void set_thread PARAMS ((int, int));
static int hexnumlen PARAMS ((ULONGEST num));
+static void init_remote_ops PARAMS ((void));
+
+static void init_extended_remote_ops PARAMS ((void));
+
+static void remote_stop PARAMS ((void));
+
+static int ishex PARAMS ((int ch, int *val));
+
+static int stubhex PARAMS ((int ch));
+
+static int remote_query PARAMS ((char, char *, char *, int *));
+
+static int hexnumstr PARAMS ((char *, ULONGEST));
+
+static CORE_ADDR remote_address_masked PARAMS ((CORE_ADDR));
+
+static void print_packet PARAMS ((char *));
+
+static unsigned long crc32 PARAMS ((unsigned char *, int, unsigned int));
+
+static void compare_sections_command PARAMS ((char *, int));
+
+static void packet_command PARAMS ((char *, int));
+
+static int stub_unpack_int PARAMS ((char *buff, int fieldlength));
+
+char *unpack_varlen_hex PARAMS ((char *buff, int *result));
+
+static char *unpack_nibble PARAMS ((char *buf, int *val));
+
+static char *pack_nibble PARAMS ((char *buf, int nibble));
+
+static char *pack_hex_byte PARAMS ((char *pkt, unsigned char byte));
+
+static char *unpack_byte PARAMS ((char *buf, int *value));
+
+static char *pack_int PARAMS ((char *buf, int value));
+
+static char *unpack_int PARAMS ((char *buf, int *value));
+
+static char *unpack_string PARAMS ((char *src, char *dest, int length));
+
+static char *pack_threadid PARAMS ((char *pkt, threadref *id));
+
+static char *unpack_threadid PARAMS ((char *inbuf, threadref *id));
+
+void int_to_threadref PARAMS ((threadref *id, int value));
+
+static int threadref_to_int PARAMS ((threadref *ref));
+
+static void copy_threadref PARAMS ((threadref *dest, threadref *src));
+
+static int threadmatch PARAMS ((threadref *dest, threadref *src));
+
+static char *pack_threadinfo_request PARAMS ((char *pkt, int mode,
+ threadref *id));
+
+static int remote_unpack_thread_info_response PARAMS ((char *pkt,
+ threadref *expectedref,
+ struct gdb_ext_thread_info *info));
+
+
+static int remote_get_threadinfo PARAMS ((threadref *threadid,
+ int fieldset, /*TAG mask */
+ struct gdb_ext_thread_info *info));
+
+static int adapt_remote_get_threadinfo PARAMS ((gdb_threadref *ref,
+ int selection,
+ struct gdb_ext_thread_info *info));
+
+static char *pack_threadlist_request PARAMS ((char *pkt, int startflag,
+ int threadcount,
+ threadref *nextthread));
+
+static int parse_threadlist_response PARAMS ((char *pkt,
+ int result_limit,
+ threadref *original_echo,
+ threadref *resultlist,
+ int *doneflag));
+
+static int remote_get_threadlist PARAMS ((int startflag,
+ threadref *nextthread,
+ int result_limit,
+ int *done,
+ int *result_count,
+ threadref *threadlist));
+
+typedef int (*rmt_thread_action) (threadref *ref, void *context);
+
+static int remote_threadlist_iterator PARAMS ((rmt_thread_action stepfunction,
+ void *context, int looplimit));
+
+static int remote_newthread_step PARAMS ((threadref *ref, void *context));
+
+static int remote_current_thread PARAMS ((int oldpid));
+
+int remote_find_new_threads PARAMS ((void));
+
+static void record_currthread PARAMS ((int currthread));
+
+static void init_remote_threads PARAMS ((void));
+
/* exported functions */
extern int fromhex PARAMS ((int a));
+
extern void getpkt PARAMS ((char *buf, int forever));
+
extern int putpkt PARAMS ((char *buf));
+void remote_console_output PARAMS ((char *));
+
/* Define the target subroutine names */
-static struct target_ops remote_ops ;
-
-static void init_remote_ops(void)
-{
- remote_ops.to_shortname = "remote";
- remote_ops.to_longname = "Remote serial target in gdb-specific protocol";
- remote_ops.to_doc = "Use a remote computer via a serial line; using a gdb-specific protocol.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya)." ;
- remote_ops.to_open = remote_open;
- remote_ops.to_close = remote_close;
- remote_ops.to_attach = NULL;
- remote_ops.to_detach = remote_detach;
- remote_ops.to_resume = remote_resume;
- remote_ops.to_wait = remote_wait;
- remote_ops.to_fetch_registers = remote_fetch_registers;
- remote_ops.to_store_registers = remote_store_registers;
- remote_ops.to_prepare_to_store = remote_prepare_to_store;
- remote_ops.to_xfer_memory = remote_xfer_memory;
- remote_ops.to_files_info = remote_files_info;
- remote_ops.to_insert_breakpoint = remote_insert_breakpoint;
- remote_ops.to_remove_breakpoint = remote_remove_breakpoint;
- remote_ops.to_terminal_init = NULL;
- remote_ops.to_terminal_inferior = NULL;
- remote_ops.to_terminal_ours_for_output = NULL;
- remote_ops.to_terminal_ours = NULL;
- remote_ops.to_terminal_info = NULL;
- remote_ops.to_kill = remote_kill;
- remote_ops.to_load = generic_load;
- remote_ops.to_lookup_symbol = NULL;
- remote_ops.to_create_inferior = NULL;
- remote_ops.to_mourn_inferior = remote_mourn;
- remote_ops.to_can_run = 0;
- remote_ops.to_notice_signals = 0;
- remote_ops.to_thread_alive = remote_thread_alive;
- remote_ops.to_stop = 0;
- remote_ops.to_stratum = process_stratum;
- remote_ops.DONT_USE = NULL;
- remote_ops.to_has_all_memory = 1;
- remote_ops.to_has_memory = 1;
- remote_ops.to_has_stack = 1;
- remote_ops.to_has_registers = 1;
- remote_ops.to_has_execution = 1;
- remote_ops.to_sections = NULL;
- remote_ops.to_sections_end = NULL;
- remote_ops.to_magic = OPS_MAGIC ;
-} /* init_remote_ops */
-
-static struct target_ops extended_remote_ops ;
-
-static void init_extended_remote_ops(void)
-{
- extended_remote_ops.to_shortname = "extended-remote";
- extended_remote_ops.to_longname = "Extended remote serial target in gdb-specific protocol";
- extended_remote_ops.to_doc = "Use a remote computer via a serial line; using a gdb-specific protocol.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).",
- extended_remote_ops.to_open = extended_remote_open;
- extended_remote_ops.to_close = remote_close;
- extended_remote_ops.to_attach = NULL;
- extended_remote_ops.to_detach = remote_detach;
- extended_remote_ops.to_resume = remote_resume;
- extended_remote_ops.to_wait = remote_wait;
- extended_remote_ops.to_fetch_registers = remote_fetch_registers;
- extended_remote_ops.to_store_registers = remote_store_registers;
- extended_remote_ops.to_prepare_to_store = remote_prepare_to_store;
- extended_remote_ops.to_xfer_memory = remote_xfer_memory;
- extended_remote_ops.to_files_info = remote_files_info;
- extended_remote_ops.to_insert_breakpoint = remote_insert_breakpoint;
- extended_remote_ops.to_remove_breakpoint = remote_remove_breakpoint;
- extended_remote_ops.to_terminal_init = NULL;
- extended_remote_ops.to_terminal_inferior = NULL;
- extended_remote_ops.to_terminal_ours_for_output = NULL;
- extended_remote_ops.to_terminal_ours = NULL;
- extended_remote_ops.to_terminal_info = NULL;
- extended_remote_ops.to_kill = remote_kill;
- extended_remote_ops.to_load = generic_load;
- extended_remote_ops.to_lookup_symbol = NULL;
- extended_remote_ops.to_create_inferior = extended_remote_create_inferior;
- extended_remote_ops.to_mourn_inferior = extended_remote_mourn;
- extended_remote_ops.to_can_run = 0;
- extended_remote_ops.to_notice_signals = 0;
- extended_remote_ops.to_thread_alive = remote_thread_alive;
- extended_remote_ops.to_stop = 0;
- extended_remote_ops.to_stratum = process_stratum;
- extended_remote_ops.DONT_USE = NULL;
- extended_remote_ops.to_has_all_memory = 1;
- extended_remote_ops.to_has_memory = 1;
- extended_remote_ops.to_has_stack = 1;
- extended_remote_ops.to_has_registers = 1;
- extended_remote_ops.to_has_execution = 1;
- extended_remote_ops.to_sections = NULL;
- extended_remote_ops.to_sections_end = NULL;
- extended_remote_ops.to_magic = OPS_MAGIC ;
-}
+void open_remote_target PARAMS ((char *, int, struct target_ops *, int));
+
+void _initialize_remote PARAMS ((void));
+
+/* */
+
+static struct target_ops remote_ops;
+static struct target_ops extended_remote_ops;
+
+static struct target_thread_vector remote_thread_vec;
/* This was 5 seconds, which is a long time to sit and wait.
Unless this is going though some terminal server or multiplexer or
static int remote_break;
+/* Has the user attempted to interrupt the target? If so, then offer
+ the user the opportunity to bail out completely if he interrupts
+ again. */
+static int interrupted_already = 0;
+
/* Descriptor for I/O to remote machine. Initialize it to NULL so that
remote_open knows that we don't have a file open when the program
starts. */
#define PBUFSIZ (REGISTER_BYTES * 2 + 32)
#endif
+
/* This variable sets the number of bytes to be written to the target
in a single packet. Normally PBUFSIZ is satisfactory, but some
targets need smaller values (perhaps because the receiving end
static int remote_write_size = PBUFSIZ;
+/* This variable sets the number of bits in an address that are to be
+ sent in a memory ("M" or "m") packet. Normally, after stripping
+ leading zeros, the entire address would be sent. This variable
+ restricts the address to REMOTE_ADDRESS_SIZE bits. HISTORY: The
+ initial implementation of remote.c restricted the address sent in
+ memory packets to ``host::sizeof long'' bytes - (typically 32
+ bits). Consequently, for 64 bit targets, the upper 32 bits of an
+ address was never sent. Since fixing this bug may cause a break in
+ some remote targets this variable is principly provided to
+ facilitate backward compatibility. */
+
+static int remote_address_size;
+
/* This is the size (in chars) of the first response to the `g' command. This
is used to limit the size of the memory read and write commands to prevent
stub buffers from overflowing. The size does not include headers and
void (*target_wait_loop_hook) PARAMS ((void));
\f
-/* These are the threads which we last sent to the remote system. -1 for all
- or -2 for not sent yet. */
-int general_thread;
-int cont_thread;
+
+/* These are the threads which we last sent to the remote system.
+ -1 for all or -2 for not sent yet. */
+static int general_thread;
+static int cont_thread;
+
+/* Call this function as a result of
+ 1) A halt indication (T packet) containing a thread id
+ 2) A direct query of currthread
+ 3) Successful execution of set thread
+ */
+
+static void
+record_currthread (currthread)
+ int currthread;
+{
+#if 0 /* target_wait must not modify inferior_pid! */
+ inferior_pid = currthread;
+#endif
+ general_thread = currthread;
+#if 0 /* setting cont_thread has a different meaning
+ from having the target report its thread id. */
+ cont_thread = currthread;
+#endif
+ /* If this is a new thread, add it to GDB's thread list.
+ If we leave it up to WFI to do this, bad things will happen. */
+ if (!in_thread_list (currthread))
+ add_thread (currthread);
+}
+
+#define MAGIC_NULL_PID 42000
static void
set_thread (th, gen)
{
char buf[PBUFSIZ];
int state = gen ? general_thread : cont_thread;
+
if (state == th)
return;
+
buf[0] = 'H';
buf[1] = gen ? 'g' : 'c';
- if (th == 42000)
+ if (th == MAGIC_NULL_PID)
{
buf[2] = '0';
buf[3] = '\0';
buf[0] = 'T';
if (th < 0)
- sprintf (&buf[1], "-%x", -th);
+ sprintf (&buf[1], "-%08x", -th);
else
- sprintf (&buf[1], "%x", th);
+ sprintf (&buf[1], "%08x", th);
putpkt (buf);
getpkt (buf, 0);
return (buf[0] == 'O' && buf[1] == 'K');
}
+/* About these extended threadlist and threadinfo packets. They are
+ variable length packets but, the fields within them are often fixed
+ length. They are redundent enough to send over UDP as is the
+ remote protocol in general. There is a matching unit test module
+ in libstub. */
+
+#define BUF_THREAD_ID_SIZE (OPAQUETHREADBYTES*2)
+
+/* encode 64 bits in 16 chars of hex */
+
+static const char hexchars[] = "0123456789abcdef";
+
+static int
+ishex (ch, val)
+ int ch;
+ int *val;
+{
+ if ((ch >= 'a') && (ch <= 'f'))
+ {
+ *val = ch - 'a' + 10;
+ return 1;
+ }
+ if ((ch >= 'A') && (ch <= 'F'))
+ {
+ *val = ch - 'A' + 10;
+ return 1;
+ }
+ if ((ch >= '0') && (ch <= '9'))
+ {
+ *val = ch - '0';
+ return 1;
+ }
+ return 0;
+}
+
+static int
+stubhex (ch)
+ int ch;
+{
+ if (ch >= 'a' && ch <= 'f')
+ return ch - 'a' + 10;
+ if (ch >= '0' && ch <= '9')
+ return ch - '0';
+ if (ch >= 'A' && ch <= 'F')
+ return ch - 'A' + 10;
+ return -1;
+}
+
+static int
+stub_unpack_int (buff, fieldlength)
+ char *buff;
+ int fieldlength;
+{
+ int nibble;
+ int retval = 0;
+
+ while (fieldlength)
+ {
+ nibble = stubhex (*buff++);
+ retval |= nibble;
+ fieldlength--;
+ if (fieldlength)
+ retval = retval << 4;
+ }
+ return retval;
+}
+
+char *
+unpack_varlen_hex (buff, result)
+ char *buff; /* packet to parse */
+ int *result;
+{
+ int nibble;
+ int retval = 0;
+
+ while (ishex (*buff, &nibble))
+ {
+ buff++;
+ retval = retval << 4;
+ retval |= nibble & 0x0f;
+ }
+ *result = retval;
+ return buff;
+}
+
+static char *
+unpack_nibble (buf, val)
+ char *buf;
+ int *val;
+{
+ ishex (*buf++, val);
+ return buf;
+}
+
+static char *
+pack_nibble (buf, nibble)
+ char *buf;
+ int nibble;
+{
+ *buf++ = hexchars[(nibble & 0x0f)];
+ return buf;
+}
+
+static char *
+pack_hex_byte (pkt, byte)
+ char *pkt;
+ unsigned char byte;
+{
+ *pkt++ = hexchars[(byte >> 4) & 0xf];
+ *pkt++ = hexchars[(byte & 0xf)];
+ return pkt;
+}
+
+static char *
+unpack_byte (buf, value)
+ char *buf;
+ int *value;
+{
+ *value = stub_unpack_int (buf, 2);
+ return buf + 2;
+}
+
+static char *
+pack_int (buf, value)
+ char *buf;
+ int value;
+{
+ buf = pack_hex_byte (buf, (value >> 24) & 0xff);
+ buf = pack_hex_byte (buf, (value >> 16) & 0xff);
+ buf = pack_hex_byte (buf, (value >> 8) & 0x0ff);
+ buf = pack_hex_byte (buf, (value & 0xff));
+ return buf;
+}
+
+static char *
+unpack_int (buf, value)
+ char *buf;
+ int *value;
+{
+ *value = stub_unpack_int (buf, 8);
+ return buf + 8;
+}
+
+#if 0 /* currently unused, uncomment when needed */
+static char *pack_string PARAMS ((char *pkt, char *string));
+
+static char *
+pack_string (pkt, string)
+ char *pkt;
+ char *string;
+{
+ char ch;
+ int len;
+
+ len = strlen (string);
+ if (len > 200)
+ len = 200; /* Bigger than most GDB packets, junk??? */
+ pkt = pack_hex_byte (pkt, len);
+ while (len-- > 0)
+ {
+ ch = *string++;
+ if ((ch == '\0') || (ch == '#'))
+ ch = '*'; /* Protect encapsulation */
+ *pkt++ = ch;
+ }
+ return pkt;
+}
+#endif /* 0 (unused) */
+
+static char *
+unpack_string (src, dest, length)
+ char *src;
+ char *dest;
+ int length;
+{
+ while (length--)
+ *dest++ = *src++;
+ *dest = '\0';
+ return src;
+}
+
+static char *
+pack_threadid (pkt, id)
+ char *pkt;
+ threadref *id;
+{
+ char *limit;
+ unsigned char *altid;
+
+ altid = (unsigned char *) id;
+ limit = pkt + BUF_THREAD_ID_SIZE;
+ while (pkt < limit)
+ pkt = pack_hex_byte (pkt, *altid++);
+ return pkt;
+}
+
+
+static char *
+unpack_threadid (inbuf, id)
+ char *inbuf;
+ threadref *id;
+{
+ char *altref;
+ char *limit = inbuf + BUF_THREAD_ID_SIZE;
+ int x, y;
+
+ altref = (char *) id;
+
+ while (inbuf < limit)
+ {
+ x = stubhex (*inbuf++);
+ y = stubhex (*inbuf++);
+ *altref++ = (x << 4) | y;
+ }
+ return inbuf;
+}
+
+/* Externally, threadrefs are 64 bits but internally, they are still
+ ints. This is due to a mismatch of specifications. We would like
+ to use 64bit thread references internally. This is an adapter
+ function. */
+
+void
+int_to_threadref (id, value)
+ threadref *id;
+ int value;
+{
+ unsigned char *scan;
+
+ scan = (unsigned char *) id;
+ {
+ int i = 4;
+ while (i--)
+ *scan++ = 0;
+ }
+ *scan++ = (value >> 24) & 0xff;
+ *scan++ = (value >> 16) & 0xff;
+ *scan++ = (value >> 8) & 0xff;
+ *scan++ = (value & 0xff);
+}
+
+static int
+threadref_to_int (ref)
+ threadref *ref;
+{
+ int i, value = 0;
+ unsigned char *scan;
+
+ scan = (char *) ref;
+ scan += 4;
+ i = 4;
+ while (i-- > 0)
+ value = (value << 8) | ((*scan++) & 0xff);
+ return value;
+}
+
+static void
+copy_threadref (dest, src)
+ threadref *dest;
+ threadref *src;
+{
+ int i;
+ unsigned char *csrc, *cdest;
+
+ csrc = (unsigned char *) src;
+ cdest = (unsigned char *) dest;
+ i = 8;
+ while (i--)
+ *cdest++ = *csrc++;
+}
+
+static int
+threadmatch (dest, src)
+ threadref *dest;
+ threadref *src;
+{
+ /* things are broken right now, so just assume we got a match */
+#if 0
+ unsigned char *srcp, *destp;
+ int i, result;
+ srcp = (char *) src;
+ destp = (char *) dest;
+
+ result = 1;
+ while (i-- > 0)
+ result &= (*srcp++ == *destp++) ? 1 : 0;
+ return result;
+#endif
+ return 1;
+}
+
+/*
+ threadid:1, # always request threadid
+ context_exists:2,
+ display:4,
+ unique_name:8,
+ more_display:16
+*/
+
+/* Encoding: 'Q':8,'P':8,mask:32,threadid:64 */
+
+static char *
+pack_threadinfo_request (pkt, mode, id)
+ char *pkt;
+ int mode;
+ threadref *id;
+{
+ *pkt++ = 'q'; /* Info Query */
+ *pkt++ = 'P'; /* process or thread info */
+ pkt = pack_int (pkt, mode); /* mode */
+ pkt = pack_threadid (pkt, id); /* threadid */
+ *pkt = '\0'; /* terminate */
+ return pkt;
+}
+
+/* These values tag the fields in a thread info response packet */
+/* Tagging the fields allows us to request specific fields and to
+ add more fields as time goes by */
+
+#define TAG_THREADID 1 /* Echo the thread identifier */
+#define TAG_EXISTS 2 /* Is this process defined enough to
+ fetch registers and its stack */
+#define TAG_DISPLAY 4 /* A short thing maybe to put on a window */
+#define TAG_THREADNAME 8 /* string, maps 1-to-1 with a thread is */
+#define TAG_MOREDISPLAY 16 /* Whatever the kernel wants to say about
+ the process*/
+
+static int
+remote_unpack_thread_info_response (pkt, expectedref, info)
+ char *pkt;
+ threadref *expectedref;
+ struct gdb_ext_thread_info *info;
+{
+ int mask, length;
+ unsigned int tag;
+ threadref ref;
+ char *limit = pkt + PBUFSIZ; /* plausable parsing limit */
+ int retval = 1;
+
+ /* info->threadid = 0; FIXME: implement zero_threadref */
+ info->active = 0;
+ info->display[0] = '\0';
+ info->shortname[0] = '\0';
+ info->more_display[0] = '\0';
+
+ /* Assume the characters indicating the packet type have been stripped */
+ pkt = unpack_int (pkt, &mask); /* arg mask */
+ pkt = unpack_threadid (pkt, &ref);
+
+ if (mask == 0)
+ warning ("Incomplete response to threadinfo request\n");
+ if (!threadmatch (&ref, expectedref))
+ { /* This is an answer to a different request */
+ warning ("ERROR RMT Thread info mismatch\n");
+ return 0;
+ }
+ copy_threadref (&info->threadid, &ref);
+
+ /* Loop on tagged fields , try to bail if somthing goes wrong */
+
+ while ((pkt < limit) && mask && *pkt) /* packets are terminated with nulls */
+ {
+ pkt = unpack_int (pkt, &tag); /* tag */
+ pkt = unpack_byte (pkt, &length); /* length */
+ if (!(tag & mask)) /* tags out of synch with mask */
+ {
+ warning ("ERROR RMT: threadinfo tag mismatch\n");
+ retval = 0;
+ break;
+ }
+ if (tag == TAG_THREADID)
+ {
+ if (length != 16)
+ {
+ warning ("ERROR RMT: length of threadid is not 16\n");
+ retval = 0;
+ break;
+ }
+ pkt = unpack_threadid (pkt, &ref);
+ mask = mask & ~TAG_THREADID;
+ continue;
+ }
+ if (tag == TAG_EXISTS)
+ {
+ info->active = stub_unpack_int (pkt, length);
+ pkt += length;
+ mask = mask & ~(TAG_EXISTS);
+ if (length > 8)
+ {
+ warning ("ERROR RMT: 'exists' length too long\n");
+ retval = 0;
+ break;
+ }
+ continue;
+ }
+ if (tag == TAG_THREADNAME)
+ {
+ pkt = unpack_string (pkt, &info->shortname[0], length);
+ mask = mask & ~TAG_THREADNAME;
+ continue;
+ }
+ if (tag == TAG_DISPLAY)
+ {
+ pkt = unpack_string (pkt, &info->display[0], length);
+ mask = mask & ~TAG_DISPLAY;
+ continue;
+ }
+ if (tag == TAG_MOREDISPLAY)
+ {
+ pkt = unpack_string (pkt, &info->more_display[0], length);
+ mask = mask & ~TAG_MOREDISPLAY;
+ continue;
+ }
+ warning ("ERROR RMT: unknown thread info tag\n");
+ break; /* Not a tag we know about */
+ }
+ return retval;
+}
+
+static int
+remote_get_threadinfo (threadid, fieldset, info)
+ threadref *threadid;
+ int fieldset; /* TAG mask */
+ struct gdb_ext_thread_info *info;
+{
+ int result;
+ char threadinfo_pkt[PBUFSIZ];
+
+ pack_threadinfo_request (threadinfo_pkt, fieldset, threadid);
+ putpkt (threadinfo_pkt);
+ getpkt (threadinfo_pkt, 0);
+ result = remote_unpack_thread_info_response (threadinfo_pkt + 2, threadid,
+ info);
+ return result;
+}
+
+/* Unfortunately, 61 bit thread-ids are bigger than the internal
+ representation of a threadid. */
+
+static int
+adapt_remote_get_threadinfo (ref, selection, info)
+ gdb_threadref *ref;
+ int selection;
+ struct gdb_ext_thread_info *info;
+{
+ threadref lclref;
+
+ int_to_threadref (&lclref, *ref);
+ return remote_get_threadinfo (&lclref, selection, info);
+}
+
+/* Format: i'Q':8,i"L":8,initflag:8,batchsize:16,lastthreadid:32 */
+
+static char *
+pack_threadlist_request (pkt, startflag, threadcount, nextthread)
+ char *pkt;
+ int startflag;
+ int threadcount;
+ threadref *nextthread;
+{
+ *pkt++ = 'q'; /* info query packet */
+ *pkt++ = 'L'; /* Process LIST or threadLIST request */
+ pkt = pack_nibble (pkt, startflag); /* initflag 1 bytes */
+ pkt = pack_hex_byte (pkt, threadcount); /* threadcount 2 bytes */
+ pkt = pack_threadid (pkt, nextthread); /* 64 bit thread identifier */
+ *pkt = '\0';
+ return pkt;
+}
+
+/* Encoding: 'q':8,'M':8,count:16,done:8,argthreadid:64,(threadid:64)* */
+
+static int
+parse_threadlist_response (pkt, result_limit, original_echo, resultlist,
+ doneflag)
+ char *pkt;
+ int result_limit;
+ threadref *original_echo;
+ threadref *resultlist;
+ int *doneflag;
+{
+ char *limit;
+ int count, resultcount, done;
+
+ resultcount = 0;
+ /* Assume the 'q' and 'M chars have been stripped. */
+ limit = pkt + (PBUFSIZ - BUF_THREAD_ID_SIZE); /* done parse past here */
+ pkt = unpack_byte (pkt, &count); /* count field */
+ pkt = unpack_nibble (pkt, &done);
+ /* The first threadid is the argument threadid. */
+ pkt = unpack_threadid (pkt, original_echo); /* should match query packet */
+ while ((count-- > 0) && (pkt < limit))
+ {
+ pkt = unpack_threadid (pkt, resultlist++);
+ if (resultcount++ >= result_limit)
+ break;
+ }
+ if (doneflag)
+ *doneflag = done;
+ return resultcount;
+}
+
+static int
+remote_get_threadlist (startflag, nextthread, result_limit,
+ done, result_count, threadlist)
+ int startflag;
+ threadref *nextthread;
+ int result_limit;
+ int *done;
+ int *result_count;
+ threadref *threadlist;
+
+{
+ static threadref echo_nextthread;
+ char threadlist_packet[PBUFSIZ];
+ char t_response[PBUFSIZ];
+ int result = 1;
+
+ /* Trancate result limit to be smaller than the packet size */
+ if ((((result_limit + 1) * BUF_THREAD_ID_SIZE) + 10) >= PBUFSIZ)
+ result_limit = (PBUFSIZ / BUF_THREAD_ID_SIZE) - 2;
+
+ pack_threadlist_request (threadlist_packet,
+ startflag, result_limit, nextthread);
+ putpkt (threadlist_packet);
+ getpkt (t_response, 0);
+
+ *result_count =
+ parse_threadlist_response (t_response + 2, result_limit, &echo_nextthread,
+ threadlist, done);
+
+ if (!threadmatch (&echo_nextthread, nextthread))
+ {
+ /* FIXME: This is a good reason to drop the packet */
+ /* Possably, there is a duplicate response */
+ /* Possabilities :
+ retransmit immediatly - race conditions
+ retransmit after timeout - yes
+ exit
+ wait for packet, then exit
+ */
+ warning ("HMM: threadlist did not echo arg thread, dropping it\n");
+ return 0; /* I choose simply exiting */
+ }
+ if (*result_count <= 0)
+ {
+ if (*done != 1)
+ {
+ warning ("RMT ERROR : failed to get remote thread list\n");
+ result = 0;
+ }
+ return result; /* break; */
+ }
+ if (*result_count > result_limit)
+ {
+ *result_count = 0;
+ warning ("RMT ERROR: threadlist response longer than requested\n");
+ return 0;
+ }
+ return result;
+}
+
+/* This is the interface between remote and threads, remotes upper interface */
+
+/* remote_find_new_threads retrieves the thread list and for each
+ thread in the list, looks up the thread in GDB's internal list,
+ ading the thread if it does not already exist. This involves
+ getting partial thread lists from the remote target so, polling the
+ quit_flag is required. */
+
+
+/* About this many threadisds fit in a packet. */
+
+#define MAXTHREADLISTRESULTS 32
+
+static int
+remote_threadlist_iterator (stepfunction, context, looplimit)
+ rmt_thread_action stepfunction;
+ void *context;
+ int looplimit;
+{
+ int done, i, result_count;
+ int startflag = 1;
+ int result = 1;
+ int loopcount = 0;
+ static threadref nextthread;
+ static threadref resultthreadlist[MAXTHREADLISTRESULTS];
+
+ done = 0;
+ while (!done)
+ {
+ if (loopcount++ > looplimit)
+ {
+ result = 0;
+ warning ("Remote fetch threadlist -infinite loop-\n");
+ break;
+ }
+ if (!remote_get_threadlist (startflag, &nextthread, MAXTHREADLISTRESULTS,
+ &done, &result_count, resultthreadlist))
+ {
+ result = 0;
+ break;
+ }
+ /* clear for later iterations */
+ startflag = 0;
+ /* Setup to resume next batch of thread references, set nextthread. */
+ if (result_count >= 1)
+ copy_threadref (&nextthread, &resultthreadlist[result_count - 1]);
+ i = 0;
+ while (result_count--)
+ if (!(result = (*stepfunction) (&resultthreadlist[i++], context)))
+ break;
+ }
+ return result;
+}
+
+static int
+remote_newthread_step (ref, context)
+ threadref *ref;
+ void *context;
+{
+ int pid;
+
+ pid = threadref_to_int (ref);
+ if (!in_thread_list (pid))
+ add_thread (pid);
+ return 1; /* continue iterator */
+}
+
+#define CRAZY_MAX_THREADS 1000
+
+static int
+remote_current_thread (oldpid)
+ int oldpid;
+{
+ char buf[PBUFSIZ];
+
+ putpkt ("qC");
+ getpkt (buf, 0);
+ if (buf[0] == 'Q' && buf[1] == 'C')
+ return strtol (&buf[2], NULL, 16);
+ else
+ return oldpid;
+}
+
+int
+remote_find_new_threads ()
+{
+ int ret;
+
+ ret = remote_threadlist_iterator (remote_newthread_step, 0,
+ CRAZY_MAX_THREADS);
+ if (inferior_pid == MAGIC_NULL_PID) /* ack ack ack */
+ inferior_pid = remote_current_thread (inferior_pid);
+ return ret;
+}
+
+/* Initialize the thread vector which is used by threads.c */
+/* The thread stub is a package, it has an initializer */
+
+static void
+init_remote_threads ()
+{
+ remote_thread_vec.find_new_threads = remote_find_new_threads;
+ remote_thread_vec.get_thread_info = adapt_remote_get_threadinfo;
+}
+
+\f
/* Restart the remote side; this is an extended protocol operation. */
static void
getpkt (buf, 0);
if (buf[0] == '\000')
- return; /* Return silently. Stub doesn't support this
- command. */
+ return; /* Return silently. Stub doesn't support
+ this command. */
if (buf[0] == 'E')
{
warning ("Remote failure reply: %s", buf);
static int
remote_start_remote (dummy)
- char *dummy;
+ PTR dummy;
{
immediate_quit = 1; /* Allow user to interrupt it */
/* Let the stub know that we want it to return the thread. */
set_thread (-1, 0);
+ inferior_pid = remote_current_thread (inferior_pid);
+
get_offsets (); /* Get text, data & bss offsets */
putpkt ("?"); /* initiate a query from remote machine */
}
/* Generic code for opening a connection to a remote target. */
+
static DCACHE *remote_dcache;
static void
int extended_p;
{
if (name == 0)
- error ("To open a remote debug connection, you need to specify what serial\n\
-device is attached to the remote system (e.g. /dev/ttya).");
+ error ("To open a remote debug connection, you need to specify what\n\
+serial device is attached to the remote system (e.g. /dev/ttya).");
target_preopen (from_tty);
}
push_target (target); /* Switch to using remote target now */
- /* Start out by trying the 'P' request to set registers. We set this each
- time that we open a new target so that if the user switches from one
- stub to another, we can (if the target is closed and reopened) cope. */
+ /* The target vector does not have the thread functions in it yet,
+ so we use this function to call back into the thread module and
+ register the thread vector and its contained functions. */
+ bind_target_thread_vector (&remote_thread_vec);
+
+ /* Start out by trying the 'P' request to set registers. We set
+ this each time that we open a new target so that if the user
+ switches from one stub to another, we can (if the target is
+ closed and reopened) cope. */
stub_supports_P = 1;
general_thread = -2;
cont_thread = -2;
- /* Without this, some commands which require an active target (such as kill)
- won't work. This variable serves (at least) double duty as both the pid
- of the target process (if it has such), and as a flag indicating that a
- target is active. These functions should be split out into seperate
- variables, especially since GDB will someday have a notion of debugging
- several processes. */
+ /* Without this, some commands which require an active target (such
+ as kill) won't work. This variable serves (at least) double duty
+ as both the pid of the target process (if it has such), and as a
+ flag indicating that a target is active. These functions should
+ be split out into seperate variables, especially since GDB will
+ someday have a notion of debugging several processes. */
- inferior_pid = 42000;
+ inferior_pid = MAGIC_NULL_PID;
/* Start the remote connection; if error (0), discard this target.
In particular, if the user quits, be sure to discard it
(we'd be in an inconsistent state otherwise). */
- if (!catch_errors (remote_start_remote, (char *)0,
- "Couldn't establish connection to remote target\n", RETURN_MASK_ALL))
- pop_target();
-
+ if (!catch_errors (remote_start_remote, NULL,
+ "Couldn't establish connection to remote target\n",
+ RETURN_MASK_ALL))
+ {
+ pop_target ();
+ return;
+ }
if (extended_p)
{
/* Tell the remote machine to resume. */
static enum target_signal last_sent_signal = TARGET_SIGNAL_0;
-int last_sent_step;
+
+static int last_sent_step;
static void
remote_resume (pid, step, siggnal)
char buf[PBUFSIZ];
if (pid == -1)
- set_thread (inferior_pid, 0);
+ set_thread (0, 0); /* run any thread */
else
- set_thread (pid, 0);
+ set_thread (pid, 0); /* run this thread */
dcache_flush (remote_dcache);
/* Send ^C to target to halt it. Target will respond, and send us a
packet. */
+static void (*ofunc) PARAMS ((int));
+
static void
remote_interrupt (signo)
int signo;
{
- /* If this doesn't work, try more severe steps. */
- signal (signo, remote_interrupt_twice);
-
- if (remote_debug)
- printf_unfiltered ("remote_interrupt called\n");
-
- /* Send a break or a ^C, depending on user preference. */
- if (remote_break)
- SERIAL_SEND_BREAK (remote_desc);
- else
- SERIAL_WRITE (remote_desc, "\003", 1);
+ remote_stop ();
+ signal (signo, remote_interrupt);
}
-
-static void (*ofunc)();
-
-/* The user typed ^C twice. */
+
static void
-remote_interrupt_twice (signo)
- int signo;
+remote_stop ()
{
- signal (signo, ofunc);
-
- interrupt_query ();
+ if (!interrupted_already)
+ {
+ /* Send a break or a ^C, depending on user preference. */
+ interrupted_already = 1;
- signal (signo, remote_interrupt);
+ if (remote_debug)
+ printf_unfiltered ("remote_stop called\n");
+
+ if (remote_break)
+ SERIAL_SEND_BREAK (remote_desc);
+ else
+ SERIAL_WRITE (remote_desc, "\003", 1);
+ }
+ else
+ {
+ signal (SIGINT, ofunc);
+ interrupt_query ();
+ signal (SIGINT, remote_interrupt);
+ interrupted_already = 0;
+ }
}
/* Ask the user what to do when an interrupt is received. */
}
/* If nonzero, ignore the next kill. */
+
int kill_kludge;
void
}
}
-/* Wait until the remote machine stops, then return,
- storing status in STATUS just as `wait' would.
- Returns "pid" (though it's not clear what, if anything, that
- means in the case of this target). */
+/* Wait until the remote machine stops, then return, storing status in
+ STATUS just as `wait' would. Returns "pid" (though it's not clear
+ what, if anything, that means in the case of this target). */
static int
remote_wait (pid, status)
{
unsigned char *p;
- ofunc = (void (*)()) signal (SIGINT, remote_interrupt);
+ interrupted_already = 0;
+ ofunc = signal (SIGINT, remote_interrupt);
getpkt ((char *) buf, 1);
signal (SIGINT, ofunc);
unsigned char *p1;
char *p_temp;
- regno = strtol ((const char *) p, &p_temp, 16); /* Read the register number */
+ /* Read the register number */
+ regno = strtol ((const char *) p, &p_temp, 16);
p1 = (unsigned char *)p_temp;
- if (p1 == p)
+ if (p1 == p) /* No register number present here */
{
p1 = (unsigned char *) strchr ((const char *) p, ':');
if (p1 == NULL)
- warning ("Malformed packet (missing colon): %s\n\
+ warning ("Malformed packet(a) (missing colon): %s\n\
Packet: '%s'\n",
p, buf);
if (strncmp ((const char *) p, "thread", p1 - p) == 0)
{
- thread_num = strtol ((const char *) ++p1, &p_temp, 16);
- p = (unsigned char *)p_temp;
+ p_temp = unpack_varlen_hex (++p1, &thread_num);
+ record_currthread (thread_num);
+ p = (unsigned char *) p_temp;
}
}
else
p = p1;
if (*p++ != ':')
- warning ("Malformed packet (missing colon): %s\n\
+ warning ("Malformed packet(b) (missing colon): %s\n\
Packet: '%s'\n",
p, buf);
}
if (*p++ != ';')
- warning ("Remote register badly formatted: %s", buf);
+ {
+ warning ("Remote register badly formatted: %s", buf);
+ warning (" here: %s",p);
+ }
}
}
/* fall through */
/* Initial thread value can only be acquired via wait, so deal with
this marker which is used before the first thread value is
acquired. */
- if (inferior_pid == 42000)
+ if (inferior_pid == MAGIC_NULL_PID)
{
inferior_pid = thread_num;
- add_thread (inferior_pid);
+ if (!in_thread_list (inferior_pid))
+ add_thread (inferior_pid);
}
return thread_num;
}
}
/* Number of bytes of registers this stub implements. */
+
static int register_bytes_found;
/* Read the remote registers into the block REGS. */
/* Currently we just read all the registers, so we don't use regno. */
+
/* ARGSUSED */
static void
remote_fetch_registers (regno)
in the buffer is not a hex character, assume that has happened
and try to fetch another packet to read. */
while ((buf[0] < '0' || buf[0] > '9')
- && (buf[0] < 'a' || buf[0] > 'f'))
+ && (buf[0] < 'a' || buf[0] > 'f')
+ && buf[0] != 'x') /* New: unavailable register value */
{
if (remote_debug)
printf_unfiltered ("Bad register packet; fetching a new packet\n");
print a second warning. */
goto supply_them;
}
- regs[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
+ if (p[0] == 'x' && p[1] == 'x')
+ regs[i] = 0; /* 'x' */
+ else
+ regs[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
p += 2;
}
warning ("Remote reply is too short: %s", buf);
#endif
}
-
- supply_them:
+
+ supply_them:
for (i = 0; i < NUM_REGS; i++)
+ {
supply_register (i, ®s[REGISTER_BYTE(i)]);
+ if (buf[REGISTER_BYTE(i) * 2] == 'x')
+ register_valid[i] = -1; /* register value not available */
+ }
}
/* Prepare to store registers. Since we may send them all (using a
remote_send (buf);
}
-/*
- Use of the data cache *used* to be disabled because it loses for looking at
- and changing hardware I/O ports and the like. Accepting `volatile'
+/* Use of the data cache *used* to be disabled because it loses for looking
+ at and changing hardware I/O ports and the like. Accepting `volatile'
would perhaps be one way to fix it. Another idea would be to use the
executable file for the text segment (for all SEC_CODE sections?
For all SEC_READONLY sections?). This has problems if you want to
clobbered memory, user downloaded the wrong thing).
Because it speeds so much up, it's now enabled, if you're playing
- with registers you turn it of (set remotecache 0)
-*/
+ with registers you turn it of (set remotecache 0). */
/* Read a word from remote address ADDR and return it.
This goes through the data cache. */
return max (i, 1);
}
+/* Set BUF to the hex digits representing NUM. */
+
+static int
+hexnumstr (buf, num)
+ char *buf;
+ ULONGEST num;
+{
+ int i;
+ int len = hexnumlen (num);
+
+ buf[len] = '\0';
+
+ for (i = len - 1; i >= 0; i--)
+ {
+ buf[i] = "0123456789abcdef" [(num & 0xf)];
+ num >>= 4;
+ }
+
+ return len;
+}
+
+/* Mask all but the least significant REMOTE_ADDRESS_SIZE bits. */
+
+static CORE_ADDR
+remote_address_masked (addr)
+ CORE_ADDR addr;
+{
+ if (remote_address_size > 0
+ && remote_address_size < (sizeof (ULONGEST) * 8))
+ {
+ /* Only create a mask when that mask can safely be constructed
+ in a ULONGEST variable. */
+ ULONGEST mask = 1;
+ mask = (mask << remote_address_size) - 1;
+ addr &= mask;
+ }
+ return addr;
+}
+
/* Write memory data directly to the remote machine.
This does not inform the data cache; the data cache uses this.
MEMADDR is the address in the remote memory space.
todo = min (len, max_buf_size / 2); /* num bytes that will fit */
- /* FIXME-32x64: Need a version of print_address_numeric which puts the
- result in a buffer like sprintf. */
- sprintf (buf, "M%lx,%x:", (unsigned long) memaddr, todo);
+ /* construct "M"<memaddr>","<len>":" */
+ /* sprintf (buf, "M%lx,%x:", (unsigned long) memaddr, todo); */
+ memaddr = remote_address_masked (memaddr);
+ p = buf;
+ *p++ = 'M';
+ p += hexnumstr (p, (ULONGEST) memaddr);
+ *p++ = ',';
+ p += hexnumstr (p, (ULONGEST) todo);
+ *p++ = ':';
+ *p = '\0';
- /* We send target system values byte by byte, in increasing byte addresses,
- each byte encoded as two hex characters. */
+ /* We send target system values byte by byte, in increasing byte
+ addresses, each byte encoded as two hex characters. */
- p = buf + strlen (buf);
for (i = 0; i < todo; i++)
{
*p++ = tohex ((myaddr[i] >> 4) & 0xf);
todo = min (len, max_buf_size / 2); /* num bytes that will fit */
- /* FIXME-32x64: Need a version of print_address_numeric which puts the
- result in a buffer like sprintf. */
- sprintf (buf, "m%lx,%x", (unsigned long) memaddr, todo);
+ /* construct "m"<memaddr>","<len>" */
+ /* sprintf (buf, "m%lx,%x", (unsigned long) memaddr, todo); */
+ memaddr = remote_address_masked (memaddr);
+ p = buf;
+ *p++ = 'm';
+ p += hexnumstr (p, (ULONGEST) memaddr);
+ *p++ = ',';
+ p += hexnumstr (p, (ULONGEST) todo);
+ *p = '\0';
+
putpkt (buf);
getpkt (buf, 0);
for (i = 0; i < todo; i++)
{
if (p[0] == 0 || p[1] == 0)
- /* Reply is short. This means that we were able to read only part
- of what we wanted to. */
+ /* Reply is short. This means that we were able to read
+ only part of what we wanted to. */
return i + (origlen - len);
myaddr[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
p += 2;
return origlen;
}
\f
-/* Read or write LEN bytes from inferior memory at MEMADDR, transferring
- to or from debugger address MYADDR. Write to inferior if SHOULD_WRITE is
- nonzero. Returns length of data written or read; 0 for error. */
+/* Read or write LEN bytes from inferior memory at MEMADDR,
+ transferring to or from debugger address MYADDR. Write to inferior
+ if SHOULD_WRITE is nonzero. Returns length of data written or
+ read; 0 for error. */
/* ARGSUSED */
static int
-remote_xfer_memory(memaddr, myaddr, len, should_write, target)
+remote_xfer_memory (memaddr, myaddr, len, should_write, target)
CORE_ADDR memaddr;
char *myaddr;
int len;
len = targlen;
#endif
- return dcache_xfer_memory (remote_dcache, memaddr, myaddr, len, should_write);
+ return dcache_xfer_memory (remote_dcache, memaddr, myaddr,
+ len, should_write);
}
}
}
-/* Send the command in BUF to the remote machine,
- and read the reply into BUF.
- Report an error if we get an error reply. */
+/* Send the command in BUF to the remote machine, and read the reply
+ into BUF. Report an error if we get an error reply. */
static void
remote_send (buf)
error ("Remote failure reply: %s", buf);
}
-/* Send a packet to the remote machine, with error checking.
- The data of the packet is in BUF. */
+/* Display a null-terminated packet on stdout, for debugging, using C
+ string notation. */
+
+static void
+print_packet (buf)
+ char *buf;
+{
+ puts_filtered ("\"");
+ while (*buf)
+ gdb_printchar (*buf++, gdb_stdout, '"');
+ puts_filtered ("\"");
+}
+
+
+/* Send a packet to the remote machine, with error checking. The data
+ of the packet is in BUF. The string in BUF can be at most PBUFSIZ - 5
+ to account for the $, # and checksum, and for a possible /0 if we are
+ debugging (remote_debug) and want to print the sent packet as a string */
int
putpkt (buf)
and giving it a checksum. */
if (cnt > (int) sizeof (buf2) - 5) /* Prosanity check */
- abort();
+ abort ();
p = buf2;
*p++ = '$';
{
*p = '\0';
printf_unfiltered ("Sending packet: %s...", buf2);
- gdb_flush(gdb_stdout);
+ gdb_flush (gdb_stdout);
}
if (SERIAL_WRITE (remote_desc, buf2, p - buf2))
perror_with_name ("putpkt: write failed");
{
case '+':
if (remote_debug)
- printf_unfiltered("Ack\n");
+ printf_unfiltered ("Ack\n");
return 1;
case SERIAL_TIMEOUT:
tcount ++;
{
char junkbuf[PBUFSIZ];
- /* It's probably an old response, and we're out of sync. Just
- gobble up the packet and ignore it. */
+ /* It's probably an old response, and we're out of sync.
+ Just gobble up the packet and ignore it. */
getpkt (junkbuf, 0);
continue; /* Now, go look for + */
}
#if 0
/* This is wrong. If doing a long backtrace, the user should be
- able to get out next time we call QUIT, without anything as violent
- as interrupt_query. If we want to provide a way out of here
- without getting to the next QUIT, it should be based on hitting
- ^C twice as in remote_wait. */
+ able to get out next time we call QUIT, without anything as
+ violent as interrupt_query. If we want to provide a way out of
+ here without getting to the next QUIT, it should be based on
+ hitting ^C twice as in remote_wait. */
if (quit_flag)
{
quit_flag = 0;
}
}
-/* Come here after finding the start of the frame. Collect the rest into BUF,
- verifying the checksum, length, and handling run-length compression.
- Returns 0 on any error, 1 on success. */
+/* Come here after finding the start of the frame. Collect the rest
+ into BUF, verifying the checksum, length, and handling run-length
+ compression. Returns 0 on any error, 1 on success. */
static int
read_frame (buf)
}
}
-/* Read a packet from the remote machine, with error checking,
- and store it in BUF. BUF is expected to be of size PBUFSIZ.
- If FOREVER, wait forever rather than timing out; this is used
- while the target is executing user code. */
+/* Read a packet from the remote machine, with error checking, and
+ store it in BUF. BUF is expected to be of size PBUFSIZ. If
+ FOREVER, wait forever rather than timing out; this is used while
+ the target is executing user code. */
void
getpkt (buf, forever)
/* Use catch_errors so the user can quit from gdb even when we aren't on
speaking terms with the remote system. */
- catch_errors (putpkt, "k", "", RETURN_MASK_ERROR);
+ catch_errors ((catch_errors_ftype*) putpkt, "k", "", RETURN_MASK_ERROR);
/* Don't wait for it to die. I'm not really sure it matters whether
we do or not. For the existing stubs, kill is a noop. */
#endif /* REMOTE_BREAKPOINT */
}
-/* Some targets are only capable of doing downloads, and afterwards they switch
- to the remote serial protocol. This function provides a clean way to get
- from the download target to the remote target. It's basically just a
- wrapper so that we don't have to expose any of the internal workings of
- remote.c.
+/* Some targets are only capable of doing downloads, and afterwards
+ they switch to the remote serial protocol. This function provides
+ a clean way to get from the download target to the remote target.
+ It's basically just a wrapper so that we don't have to expose any
+ of the internal workings of remote.c.
- Prior to calling this routine, you should shutdown the current target code,
- else you will get the "A program is being debugged already..." message.
- Usually a call to pop_target() suffices.
-*/
+ Prior to calling this routine, you should shutdown the current
+ target code, else you will get the "A program is being debugged
+ already..." message. Usually a call to pop_target() suffices. */
void
push_remote_target (name, from_tty)
remote_open_1 (name, from_tty, target, extended_p);
}
+/* Table used by the crc32 function to calcuate the checksum. */
+
+static unsigned long crc32_table[256] = {0, 0};
+
+static unsigned long
+crc32 (buf, len, crc)
+ unsigned char *buf;
+ int len;
+ unsigned int crc;
+{
+ if (! crc32_table[1])
+ {
+ /* Initialize the CRC table and the decoding table. */
+ int i, j;
+ unsigned int c;
+
+ for (i = 0; i < 256; i++)
+ {
+ for (c = i << 24, j = 8; j > 0; --j)
+ c = c & 0x80000000 ? (c << 1) ^ 0x04c11db7 : (c << 1);
+ crc32_table[i] = c;
+ }
+ }
+
+ while (len--)
+ {
+ crc = (crc << 8) ^ crc32_table[((crc >> 24) ^ *buf) & 255];
+ buf++;
+ }
+ return crc;
+}
+
+/* compare-sections command
+
+ With no arguments, compares each loadable section in the exec bfd
+ with the same memory range on the target, and reports mismatches.
+ Useful for verifying the image on the target against the exec file.
+ Depends on the target understanding the new "qCRC:" request. */
+
+static void
+compare_sections_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ asection *s;
+ unsigned long host_crc, target_crc;
+ extern bfd *exec_bfd;
+ struct cleanup *old_chain;
+ char *tmp, *sectdata, *sectname, buf[PBUFSIZ];
+ bfd_size_type size;
+ bfd_vma lma;
+ int matched = 0;
+ int mismatched = 0;
+
+ if (!exec_bfd)
+ error ("command cannot be used without an exec file");
+ if (!current_target.to_shortname ||
+ strcmp (current_target.to_shortname, "remote") != 0)
+ error ("command can only be used with remote target");
+
+ for (s = exec_bfd->sections; s; s = s->next)
+ {
+ if (!(s->flags & SEC_LOAD))
+ continue; /* skip non-loadable section */
+
+ size = bfd_get_section_size_before_reloc (s);
+ if (size == 0)
+ continue; /* skip zero-length section */
+
+ sectname = (char *) bfd_get_section_name (exec_bfd, s);
+ if (args && strcmp (args, sectname) != 0)
+ continue; /* not the section selected by user */
+
+ matched = 1; /* do this section */
+ lma = s->lma;
+ /* FIXME: assumes lma can fit into long */
+ sprintf (buf, "qCRC:%lx,%lx", (long) lma, (long) size);
+ putpkt (buf);
+
+ /* be clever; compute the host_crc before waiting for target reply */
+ sectdata = xmalloc (size);
+ old_chain = make_cleanup (free, sectdata);
+ bfd_get_section_contents (exec_bfd, s, sectdata, 0, size);
+ host_crc = crc32 ((unsigned char *) sectdata, size, 0xffffffff);
+
+ getpkt (buf, 0);
+ if (buf[0] == 'E')
+ error ("target memory fault, section %s, range 0x%08x -- 0x%08x",
+ sectname, lma, lma + size);
+ if (buf[0] != 'C')
+ error ("remote target does not support this operation");
+
+ for (target_crc = 0, tmp = &buf[1]; *tmp; tmp++)
+ target_crc = target_crc * 16 + fromhex (*tmp);
+
+ printf_filtered ("Section %s, range 0x%08x -- 0x%08x: ",
+ sectname, lma, lma + size);
+ if (host_crc == target_crc)
+ printf_filtered ("matched.\n");
+ else
+ {
+ printf_filtered ("MIS-MATCHED!\n");
+ mismatched++;
+ }
+
+ do_cleanups (old_chain);
+ }
+ if (mismatched > 0)
+ warning ("One or more sections of the remote executable does not match\n\
+the loaded file\n");
+ if (args && !matched)
+ printf_filtered ("No loaded section named '%s'.\n", args);
+}
+
+static int
+remote_query (query_type, buf, outbuf, bufsiz)
+ char query_type;
+ char *buf;
+ char *outbuf;
+ int *bufsiz;
+{
+ int i;
+ char buf2[PBUFSIZ];
+ char *p2 = &buf2[0];
+ char *p = buf;
+
+ if (! bufsiz)
+ error ("null pointer to remote bufer size specified");
+
+ /* minimum outbuf size is PBUFSIZE - if bufsiz is not large enough let
+ the caller know and return what the minimum size is */
+ /* Note: a zero bufsiz can be used to query the minimum buffer size */
+ if ( *bufsiz < PBUFSIZ )
+ {
+ *bufsiz = PBUFSIZ;
+ return -1;
+ }
+
+ /* except for querying the minimum buffer size, target must be open */
+ if (! remote_desc)
+ error ("remote query is only available after target open");
+
+ /* we only take uppercase letters as query types, at least for now */
+ if ( (query_type < 'A') || (query_type > 'Z') )
+ error ("invalid remote query type");
+
+ if (! buf)
+ error ("null remote query specified");
+
+ if (! outbuf)
+ error ("remote query requires a buffer to receive data");
+
+ outbuf[0] = '\0';
+
+ *p2++ = 'q';
+ *p2++ = query_type;
+
+ /* we used one buffer char for the remote protocol q command and another
+ for the query type. As the remote protocol encapsulation uses 4 chars
+ plus one extra in case we are debugging (remote_debug),
+ we have PBUFZIZ - 7 left to pack the query string */
+ i = 0;
+ while ( buf[i] && (i < (PBUFSIZ - 8)) )
+ {
+ /* bad caller may have sent forbidden characters */
+ if ( (!isprint(buf[i])) || (buf[i] == '$') || (buf[i] == '#') )
+ error ("illegal characters in query string");
+
+ *p2++ = buf[i];
+ i++;
+ }
+ *p2 = buf[i];
+
+ if ( buf[i] )
+ error ("query larger than available buffer");
+
+ i = putpkt (buf2);
+ if ( i < 0 ) return i;
+
+ getpkt (outbuf, 0);
+
+ return 0;
+}
+
+static void
+packet_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ char buf[PBUFSIZ];
+
+ if (! remote_desc)
+ error ("command can only be used with remote target");
+
+ if (! args)
+ error ("remote-packet command requires packet text as argument");
+
+ puts_filtered ("sending: ");
+ print_packet (args);
+ puts_filtered ("\n");
+ putpkt (args);
+
+ getpkt (buf, 0);
+ puts_filtered ("received: ");
+ print_packet (buf);
+ puts_filtered ("\n");
+}
+
+#if 0
+/* --------- UNIT_TEST for THREAD oriented PACKETS ------------------------- */
+
+static void display_thread_info PARAMS ((struct gdb_ext_thread_info *info));
+
+static void threadset_test_cmd PARAMS ((char *cmd, int tty));
+
+static void threadalive_test PARAMS ((char *cmd, int tty));
+
+static void threadlist_test_cmd PARAMS ((char *cmd, int tty));
+
+int get_and_display_threadinfo PARAMS ((threadref *ref));
+
+static void threadinfo_test_cmd PARAMS ((char *cmd, int tty));
+
+static int thread_display_step PARAMS ((threadref *ref, void *context));
+
+static void threadlist_update_test_cmd PARAMS ((char *cmd, int tty));
+
+static void init_remote_threadtests PARAMS ((void));
+
+#define SAMPLE_THREAD 0x05060708 /* Truncated 64 bit threadid */
+
+static void
+threadset_test_cmd (cmd, tty)
+ char *cmd;
+ int tty;
+{
+ int sample_thread = SAMPLE_THREAD;
+
+ printf_filtered ("Remote threadset test\n");
+ set_thread (sample_thread, 1);
+}
+
+
+static void
+threadalive_test (cmd, tty)
+ char *cmd;
+ int tty;
+{
+ int sample_thread = SAMPLE_THREAD;
+
+ if (remote_thread_alive (sample_thread))
+ printf_filtered ("PASS: Thread alive test\n");
+ else
+ printf_filtered ("FAIL: Thread alive test\n");
+}
+
+void output_threadid PARAMS ((char *title, threadref * ref));
+
+void
+output_threadid (title, ref)
+ char *title;
+ threadref *ref;
+{
+ char hexid[20];
+
+ pack_threadid (&hexid[0], ref); /* Convert threead id into hex */
+ hexid[16] = 0;
+ printf_filtered ("%s %s\n", title, (&hexid[0]));
+}
+
+static void
+threadlist_test_cmd (cmd, tty)
+ char *cmd;
+ int tty;
+{
+ int startflag = 1;
+ threadref nextthread;
+ int done, result_count;
+ threadref threadlist[3];
+
+ printf_filtered ("Remote Threadlist test\n");
+ if (!remote_get_threadlist (startflag, &nextthread, 3, &done,
+ &result_count, &threadlist[0]))
+ printf_filtered ("FAIL: threadlist test\n");
+ else
+ {
+ threadref *scan = threadlist;
+ threadref *limit = scan + result_count;
+
+ while (scan < limit)
+ output_threadid (" thread ", scan++);
+ }
+}
+
+void
+display_thread_info (info)
+ struct gdb_ext_thread_info *info;
+{
+ output_threadid ("Threadid: ", &info->threadid);
+ printf_filtered ("Name: %s\n ", info->shortname);
+ printf_filtered ("State: %s\n", info->display);
+ printf_filtered ("other: %s\n\n", info->more_display);
+}
+
+int
+get_and_display_threadinfo (ref)
+ threadref *ref;
+{
+ int result;
+ int set;
+ struct gdb_ext_thread_info threadinfo;
+
+ set = TAG_THREADID | TAG_EXISTS | TAG_THREADNAME
+ | TAG_MOREDISPLAY | TAG_DISPLAY;
+ if (0 != (result = remote_get_threadinfo (ref, set, &threadinfo)))
+ display_thread_info (&threadinfo);
+ return result;
+}
+
+static void
+threadinfo_test_cmd (cmd, tty)
+ char *cmd;
+ int tty;
+{
+ int athread = SAMPLE_THREAD;
+ threadref thread;
+ int set;
+
+ int_to_threadref (&thread, athread);
+ printf_filtered ("Remote Threadinfo test\n");
+ if (!get_and_display_threadinfo (&thread))
+ printf_filtered ("FAIL cannot get thread info\n");
+}
+
+static int
+thread_display_step (ref, context)
+ threadref *ref;
+ void *context;
+{
+ /* output_threadid(" threadstep ",ref); *//* simple test */
+ return get_and_display_threadinfo (ref);
+}
+
+static void
+threadlist_update_test_cmd (cmd, tty)
+ char *cmd;
+ int tty;
+{
+ printf_filtered ("Remote Threadlist update test\n");
+ remote_threadlist_iterator (thread_display_step, 0, CRAZY_MAX_THREADS);
+}
+
+static void
+init_remote_threadtests (void)
+{
+ add_com ("tlist", class_obscure, threadlist_test_cmd,
+ "Fetch and print the remote list of thread identifiers, one pkt only");
+ add_com ("tinfo", class_obscure, threadinfo_test_cmd,
+ "Fetch and display info about one thread");
+ add_com ("tset", class_obscure, threadset_test_cmd,
+ "Test setting to a different thread");
+ add_com ("tupd", class_obscure, threadlist_update_test_cmd,
+ "Iterate through updating all remote thread info");
+ add_com ("talive", class_obscure, threadalive_test,
+ " Remote thread alive test ");
+}
+
+#endif /* 0 */
+
+static void
+init_remote_ops ()
+{
+ remote_ops.to_shortname = "remote";
+ remote_ops.to_longname = "Remote serial target in gdb-specific protocol";
+ remote_ops.to_doc =
+ "Use a remote computer via a serial line, using a gdb-specific protocol.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+ remote_ops.to_open = remote_open;
+ remote_ops.to_close = remote_close;
+ remote_ops.to_detach = remote_detach;
+ remote_ops.to_resume = remote_resume;
+ remote_ops.to_wait = remote_wait;
+ remote_ops.to_fetch_registers = remote_fetch_registers;
+ remote_ops.to_store_registers = remote_store_registers;
+ remote_ops.to_prepare_to_store = remote_prepare_to_store;
+ remote_ops.to_xfer_memory = remote_xfer_memory;
+ remote_ops.to_files_info = remote_files_info;
+ remote_ops.to_insert_breakpoint = remote_insert_breakpoint;
+ remote_ops.to_remove_breakpoint = remote_remove_breakpoint;
+ remote_ops.to_kill = remote_kill;
+ remote_ops.to_load = generic_load;
+ remote_ops.to_mourn_inferior = remote_mourn;
+ remote_ops.to_thread_alive = remote_thread_alive;
+ remote_ops.to_stop = remote_stop;
+ remote_ops.to_query = remote_query;
+ remote_ops.to_stratum = process_stratum;
+ remote_ops.to_has_all_memory = 1;
+ remote_ops.to_has_memory = 1;
+ remote_ops.to_has_stack = 1;
+ remote_ops.to_has_registers = 1;
+ remote_ops.to_has_execution = 1;
+ remote_ops.to_has_thread_control = tc_schedlock; /* can lock scheduler */
+ remote_ops.to_magic = OPS_MAGIC;
+}
+
+/* Set up the extended remote vector by making a copy of the standard
+ remote vector and adding to it. */
+
+static void
+init_extended_remote_ops ()
+{
+ extended_remote_ops = remote_ops;
+
+ extended_remote_ops.to_shortname = "extended-remote";
+ extended_remote_ops.to_longname =
+ "Extended remote serial target in gdb-specific protocol";
+ extended_remote_ops.to_doc =
+ "Use a remote computer via a serial line, using a gdb-specific protocol.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).",
+ extended_remote_ops.to_open = extended_remote_open;
+ extended_remote_ops.to_create_inferior = extended_remote_create_inferior;
+ extended_remote_ops.to_mourn_inferior = extended_remote_mourn;
+}
void
_initialize_remote ()
{
- init_remote_ops() ;
- init_extended__remote_ops() ;
+ init_remote_ops ();
add_target (&remote_ops);
- add_target (&extended_remote_ops);
-
- add_show_from_set (add_set_cmd ("remotetimeout", no_class,
- var_integer, (char *)&remote_timeout,
- "Set timeout value for remote read.\n", &setlist),
- &showlist);
- add_show_from_set (add_set_cmd ("remotebreak", no_class,
- var_integer, (char *)&remote_break,
- "Set whether to send break if interrupted.\n", &setlist),
- &showlist);
+ init_extended_remote_ops ();
+ add_target (&extended_remote_ops);
+ init_remote_threads ();
+#if 0
+ init_remote_threadtests ();
+#endif
- add_show_from_set (add_set_cmd ("remotewritesize", no_class,
- var_integer, (char *)&remote_write_size,
- "Set the maximum number of bytes in each memory write packet.\n", &setlist),
- &showlist);
+ add_cmd ("compare-sections", class_obscure, compare_sections_command,
+ "Compare section data on target to the exec file.\n\
+Argument is a single section name (default: all loaded sections).",
+ &cmdlist);
+
+ add_cmd ("packet", class_maintenance, packet_command,
+ "Send an arbitrary packet to a remote target.\n\
+ maintenance packet TEXT\n\
+If GDB is talking to an inferior via the GDB serial protocol, then\n\
+this command sends the string TEXT to the inferior, and displays the\n\
+response packet. GDB supplies the initial `$' character, and the\n\
+terminating `#' character and checksum.",
+ &maintenancelist);
+
+ add_show_from_set
+ (add_set_cmd ("remotetimeout", no_class,
+ var_integer, (char *)&remote_timeout,
+ "Set timeout value for remote read.\n",
+ &setlist),
+ &showlist);
+
+ add_show_from_set
+ (add_set_cmd ("remotebreak", no_class,
+ var_integer, (char *)&remote_break,
+ "Set whether to send break if interrupted.\n",
+ &setlist),
+ &showlist);
+
+ add_show_from_set
+ (add_set_cmd ("remotewritesize", no_class,
+ var_integer, (char *)&remote_write_size,
+ "Set the maximum number of bytes per memory write packet.\n",
+ &setlist),
+ &showlist);
+
+ remote_address_size = TARGET_PTR_BIT;
+ add_show_from_set
+ (add_set_cmd ("remoteaddresssize", class_obscure,
+ var_integer, (char *)&remote_address_size,
+ "Set the maximum size of the address (in bits) \
+in a memory packet.\n",
+ &setlist),
+ &showlist);
}