static void extended_remote_open PARAMS ((char *name, int from_tty));
-static void remote_open_1 PARAMS ((char *, int, struct target_ops *));
+static void remote_open_1 PARAMS ((char *, int, struct target_ops *, int extended_p));
static void remote_close PARAMS ((int quitting));
static void remote_mourn_1 PARAMS ((struct target_ops *));
-static void getpkt PARAMS ((char *buf, int forever));
-
-static int putpkt PARAMS ((char *buf));
-
static void remote_send PARAMS ((char *buf));
static int readchar PARAMS ((int timeout));
static int tohex PARAMS ((int nib));
-static int fromhex PARAMS ((int a));
-
static void remote_detach PARAMS ((char *args, int from_tty));
static void remote_interrupt PARAMS ((int signo));
static int remote_remove_breakpoint PARAMS ((CORE_ADDR, char *));
+static int hexnumlen PARAMS ((ULONGEST num));
+
static struct target_ops remote_ops; /* Forward decl */
static struct target_ops extended_remote_ops; /* Forward decl */
+/* exported functions */
+
+extern int fromhex PARAMS ((int a));
+extern void getpkt PARAMS ((char *buf, int forever));
+extern int putpkt PARAMS ((char *buf));
+
+
/* This was 5 seconds, which is a long time to sit and wait.
Unless this is going though some terminal server or multiplexer or
other form of hairy serial connection, I would think 2 seconds would
/* This is the size (in chars) of the first response to the `g' command. This
is used to limit the size of the memory read and write commands to prevent
- stub buffers from overflowing. */
+ stub buffers from overflowing. The size does not include headers and
+ trailers, it is only the payload size. */
static int remote_register_buf_size = 0;
static void
get_offsets ()
{
- char buf[PBUFSIZ];
- int nvals;
+ char buf[PBUFSIZ], *ptr;
+ int lose;
CORE_ADDR text_addr, data_addr, bss_addr;
struct section_offsets *offs;
return;
}
- nvals = sscanf (buf, "Text=%lx;Data=%lx;Bss=%lx", &text_addr, &data_addr,
- &bss_addr);
- if (nvals != 3)
+ /* Pick up each field in turn. This used to be done with scanf, but
+ scanf will make trouble if CORE_ADDR size doesn't match
+ conversion directives correctly. The following code will work
+ with any size of CORE_ADDR. */
+ text_addr = data_addr = bss_addr = 0;
+ ptr = buf;
+ lose = 0;
+
+ if (strncmp (ptr, "Text=", 5) == 0)
+ {
+ ptr += 5;
+ /* Don't use strtol, could lose on big values. */
+ while (*ptr && *ptr != ';')
+ text_addr = (text_addr << 4) + fromhex (*ptr++);
+ }
+ else
+ lose = 1;
+
+ if (!lose && strncmp (ptr, ";Data=", 6) == 0)
+ {
+ ptr += 6;
+ while (*ptr && *ptr != ';')
+ data_addr = (data_addr << 4) + fromhex (*ptr++);
+ }
+ else
+ lose = 1;
+
+ if (!lose && strncmp (ptr, ";Bss=", 5) == 0)
+ {
+ ptr += 5;
+ while (*ptr && *ptr != ';')
+ bss_addr = (bss_addr << 4) + fromhex (*ptr++);
+ }
+ else
+ lose = 1;
+
+ if (lose)
error ("Malformed response to offset query, %s", buf);
if (symfile_objfile == NULL)
char *name;
int from_tty;
{
- remote_open_1 (name, from_tty, &remote_ops);
+ remote_open_1 (name, from_tty, &remote_ops, 0);
}
/* Open a connection to a remote debugger using the extended
char *name;
int from_tty;
{
- char buf[PBUFSIZ];
-
- /* Do the basic remote open stuff. */
- remote_open_1 (name, from_tty, &extended_remote_ops);
-
- /* Now tell the remote that we're using the extended protocol. */
- putpkt ("!");
- getpkt (buf, 0);
-
+ remote_open_1 (name, from_tty, &extended_remote_ops, 1/*extended_p*/);
}
/* Generic code for opening a connection to a remote target. */
static DCACHE *remote_dcache;
static void
-remote_open_1 (name, from_tty, target)
+remote_open_1 (name, from_tty, target, extended_p)
char *name;
int from_tty;
struct target_ops *target;
+ int extended_p;
{
if (name == 0)
error ("To open a remote debug connection, you need to specify what serial\n\
if (!catch_errors (remote_start_remote, (char *)0,
"Couldn't establish connection to remote target\n", RETURN_MASK_ALL))
pop_target();
+
+
+ if (extended_p)
+ {
+ /* tell the remote that we're using the extended protocol. */
+ char buf[PBUFSIZ];
+ putpkt ("!");
+ getpkt (buf, 0);
+ }
}
/* This takes a program previously attached to and detaches it. After
/* Convert hex digit A to a number. */
-static int
+int
fromhex (a)
int a;
{
return a - '0';
else if (a >= 'a' && a <= 'f')
return a - 'a' + 10;
+ else if (a >= 'A' && a <= 'F')
+ return a - 'A' + 10;
else
error ("Reply contains invalid hex digit %d", a);
}
/* If nonzero, ignore the next kill. */
int kill_kludge;
+void
+remote_console_output (msg)
+ char *msg;
+{
+ char *p;
+
+ for (p = msg; *p; p +=2)
+ {
+ char tb[2];
+ char c = fromhex (p[0]) * 16 + fromhex (p[1]);
+ tb[0] = c;
+ tb[1] = 0;
+ if (target_output_hook)
+ target_output_hook (tb);
+ else
+ fputs_filtered (tb, gdb_stdout);
+ }
+}
+
/* Wait until the remote machine stops, then return,
storing status in STATUS just as `wait' would.
Returns "pid" (though it's not clear what, if anything, that
n... = register number
r... = register contents
*/
-
p = &buf[3]; /* after Txx */
while (*p)
goto got_status;
case 'O': /* Console output */
- for (p = buf + 1; *p; p +=2)
- {
- char tb[2];
- char c = fromhex (p[0]) * 16 + fromhex (p[1]);
- tb[0] = c;
- tb[1] = 0;
- if (target_output_hook)
- target_output_hook (tb);
- else
- fputs_filtered (tb, gdb_stdout);
- }
+ remote_console_output (buf + 1);
continue;
case '\0':
if (last_sent_signal != TARGET_SIGNAL_0)
for (i = 0; num != 0; i++)
num >>= 4;
- return min (i, 1);
+ return max (i, 1);
}
/* Write memory data directly to the remote machine.
/* Chop the transfer down if necessary */
max_buf_size = min (remote_write_size, PBUFSIZ);
- max_buf_size = min (max_buf_size, remote_register_buf_size);
+ if (remote_register_buf_size != 0)
+ max_buf_size = min (max_buf_size, remote_register_buf_size);
-#define PACKET_OVERHEAD (1 + 1 + 1 + 2) /* $x#xx - Overhead for all types of packets */
-
- /* packet overhead + <memaddr>,<len>: */
- max_buf_size -= PACKET_OVERHEAD + hexnumlen (memaddr + len - 1) + 1 + hexnumlen (len) + 1;
+ /* Subtract header overhead from max payload size - $M<memaddr>,<len>:#nn */
+ max_buf_size -= 2 + hexnumlen (memaddr + len - 1) + 1 + hexnumlen (len) + 4;
origlen = len;
while (len > 0)
/* Chop the transfer down if necessary */
max_buf_size = min (remote_write_size, PBUFSIZ);
- max_buf_size = min (max_buf_size, remote_register_buf_size);
-
- /* packet overhead */
- max_buf_size -= PACKET_OVERHEAD;
+ if (remote_register_buf_size != 0)
+ max_buf_size = min (max_buf_size, remote_register_buf_size);
origlen = len;
while (len > 0)
/* Send a packet to the remote machine, with error checking.
The data of the packet is in BUF. */
-static int
+int
putpkt (buf)
char *buf;
{
If FOREVER, wait forever rather than timing out; this is used
while the target is executing user code. */
-static void
+void
getpkt (buf, forever)
char *buf;
int forever;
if (val == 1)
{
if (remote_debug)
- fprintf_unfiltered (gdb_stderr, "Packet received: %s\n", buf);
+ fprintf_unfiltered (gdb_stdout, "Packet received: %s\n", buf);
SERIAL_WRITE (remote_desc, "+", 1);
return;
}
remote_open (name, from_tty);
}
+/* Other targets want to use the entire remote serial module but with
+ certain remote_ops overridden. */
+
+void
+open_remote_target (name, from_tty, target, extended_p)
+ char *name;
+ int from_tty;
+ struct target_ops *target;
+ int extended_p;
+{
+ printf_filtered ("Selecting the %sremote protocol\n",
+ (extended_p ? "extended-" : ""));
+ remote_open_1 (name, from_tty, target, extended_p);
+}
+
void
_initialize_remote ()
{
projects / deliverable / binutils-gdb.git / blobdiff