/* Remote target communications for serial-line targets in custom GDB protocol
Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
- 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+ 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
This file is part of GDB.
static void cleanup_sigint_signal_handler (void *dummy);
static void initialize_sigint_signal_handler (void);
static int getpkt_sane (char **buf, long *sizeof_buf, int forever);
+static int getpkt_or_notif_sane (char **buf, long *sizeof_buf,
+ int forever);
static void handle_remote_sigint (int);
static void handle_remote_sigint_twice (int);
static void remote_prepare_to_store (struct regcache *regcache);
-static void remote_fetch_registers (struct regcache *regcache, int regno);
-
-static void remote_resume (ptid_t ptid, int step,
- enum target_signal siggnal);
static void remote_open (char *name, int from_tty);
static void extended_remote_open (char *name, int from_tty);
static void remote_close (int quitting);
-static void remote_store_registers (struct regcache *regcache, int regno);
-
-static void remote_mourn (void);
+static void remote_mourn (struct target_ops *ops);
static void extended_remote_restart (void);
-static void extended_remote_mourn (void);
+static void extended_remote_mourn (struct target_ops *);
static void remote_mourn_1 (struct target_ops *);
static int readchar (int timeout);
-static ptid_t remote_wait (ptid_t ptid,
- struct target_waitstatus *status);
-
-static void remote_kill (void);
+static void remote_kill (struct target_ops *ops);
static int tohex (int nib);
static int remote_async_mask (int new_mask);
-static void remote_detach (char *args, int from_tty);
+static void remote_detach (struct target_ops *ops, char *args, int from_tty);
static void remote_interrupt (int signo);
static void set_general_thread (struct ptid ptid);
static void set_continue_thread (struct ptid ptid);
-static int remote_thread_alive (ptid_t);
-
static void get_offsets (void);
static void skip_frame (void);
static char *write_ptid (char *buf, const char *endbuf, ptid_t ptid);
static ptid_t read_ptid (char *buf, char **obuf);
+static void remote_query_supported (void);
+
+static void remote_check_symbols (struct objfile *objfile);
+
void _initialize_remote (void);
+struct stop_reply;
+static struct stop_reply *stop_reply_xmalloc (void);
+static void stop_reply_xfree (struct stop_reply *);
+static void do_stop_reply_xfree (void *arg);
+static void remote_parse_stop_reply (char *buf, struct stop_reply *);
+static void push_stop_reply (struct stop_reply *);
+static void remote_get_pending_stop_replies (void);
+static void discard_pending_stop_replies (int pid);
+static int peek_stop_reply (ptid_t ptid);
+
+static void remote_async_inferior_event_handler (gdb_client_data);
+static void remote_async_get_pending_events_handler (gdb_client_data);
+
+static void remote_terminal_ours (void);
+
+static int remote_read_description_p (struct target_ops *target);
+
+/* The non-stop remote protocol provisions for one pending stop reply.
+ This is where we keep it until it is acknowledged. */
+
+static struct stop_reply *pending_stop_reply = NULL;
+
/* For "remote". */
static struct cmd_list_element *remote_cmdlist;
/* True if the stub reported support for multi-process
extensions. */
int multi_process_aware;
+
+ /* True if we resumed the target and we're waiting for the target to
+ stop. In the mean time, we can't start another command/query.
+ The remote server wouldn't be ready to process it, so we'd
+ timeout waiting for a reply that would never come and eventually
+ we'd close the connection. This can happen in asynchronous mode
+ because we allow GDB commands while the target is running. */
+ int waiting_for_stop_reply;
+
+ /* True if the stub reports support for non-stop mode. */
+ int non_stop_aware;
+
+ /* True if the stub reports support for vCont;t. */
+ int support_vCont_t;
+
+ /* True if the stub reports support for conditional tracepoints. */
+ int cond_tracepoints;
};
/* Returns true if the multi-process extensions are in effect. */
set_remote_protocol_packet_cmd,
show_remote_protocol_packet_cmd,
&remote_set_cmdlist, &remote_show_cmdlist);
+ /* The command code copies the documentation strings. */
+ xfree (set_doc);
+ xfree (show_doc);
/* set/show remote NAME-packet {auto,on,off} -- legacy. */
if (legacy)
{
PACKET_qXfer_memory_map,
PACKET_qXfer_spu_read,
PACKET_qXfer_spu_write,
+ PACKET_qXfer_osdata,
PACKET_qGetTLSAddr,
PACKET_qSupported,
PACKET_QPassSignals,
PACKET_vRun,
PACKET_QStartNoAckMode,
PACKET_vKill,
+ PACKET_qXfer_siginfo_read,
+ PACKET_qXfer_siginfo_write,
+ PACKET_qAttached,
+ PACKET_ConditionalTracepoints,
+ PACKET_bc,
+ PACKET_bs,
PACKET_MAX
};
static struct async_signal_handler *sigint_remote_twice_token;
static struct async_signal_handler *sigint_remote_token;
+\f
+/* Asynchronous signal handle registered as event loop source for
+ when we have pending events ready to be passed to the core. */
+
+static struct async_event_handler *remote_async_inferior_event_token;
+
+/* Asynchronous signal handle registered as event loop source for when
+ the remote sent us a %Stop notification. The registered callback
+ will do a vStopped sequence to pull the rest of the events out of
+ the remote side into our event queue. */
+
+static struct async_event_handler *remote_async_get_pending_events_token;
\f
static ptid_t magic_null_ptid;
static ptid_t general_thread;
static ptid_t continue_thread;
+/* Find out if the stub attached to PID (and hence GDB should offer to
+ detach instead of killing it when bailing out). */
-/* Call this function as a result of
- 1) A halt indication (T packet) containing a thread id
- 2) A direct query of currthread
- 3) Successful execution of set thread
- */
+static int
+remote_query_attached (int pid)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ if (remote_protocol_packets[PACKET_qAttached].support == PACKET_DISABLE)
+ return 0;
+
+ if (remote_multi_process_p (rs))
+ sprintf (rs->buf, "qAttached:%x", pid);
+ else
+ sprintf (rs->buf, "qAttached");
+
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ switch (packet_ok (rs->buf,
+ &remote_protocol_packets[PACKET_qAttached]))
+ {
+ case PACKET_OK:
+ if (strcmp (rs->buf, "1") == 0)
+ return 1;
+ break;
+ case PACKET_ERROR:
+ warning (_("Remote failure reply: %s"), rs->buf);
+ break;
+ case PACKET_UNKNOWN:
+ break;
+ }
+
+ return 0;
+}
+
+/* Add PID to GDB's inferior table. Since we can be connected to a
+ remote system before before knowing about any inferior, mark the
+ target with execution when we find the first inferior. If ATTACHED
+ is 1, then we had just attached to this inferior. If it is 0, then
+ we just created this inferior. If it is -1, then try querying the
+ remote stub to find out if it had attached to the inferior or
+ not. */
+
+static struct inferior *
+remote_add_inferior (int pid, int attached)
+{
+ struct inferior *inf;
+
+ /* Check whether this process we're learning about is to be
+ considered attached, or if is to be considered to have been
+ spawned by the stub. */
+ if (attached == -1)
+ attached = remote_query_attached (pid);
+
+ inf = add_inferior (pid);
+
+ inf->attach_flag = attached;
+
+ return inf;
+}
+
+/* Add thread PTID to GDB's thread list. Tag it as executing/running
+ according to RUNNING. */
static void
-record_currthread (ptid_t currthread)
+remote_add_thread (ptid_t ptid, int running)
{
- general_thread = currthread;
+ add_thread (ptid);
+
+ set_executing (ptid, running);
+ set_running (ptid, running);
+}
+/* Come here when we learn about a thread id from the remote target.
+ It may be the first time we hear about such thread, so take the
+ opportunity to add it to GDB's thread list. In case this is the
+ first time we're noticing its corresponding inferior, add it to
+ GDB's inferior list as well. */
+
+static void
+remote_notice_new_inferior (ptid_t currthread, int running)
+{
/* If this is a new thread, add it to GDB's thread list.
If we leave it up to WFI to do this, bad things will happen. */
{
/* We're seeing an event on a thread id we knew had exited.
This has to be a new thread reusing the old id. Add it. */
- add_thread (currthread);
+ remote_add_thread (currthread, running);
return;
}
if (!in_thread_list (currthread))
{
- if (ptid_equal (pid_to_ptid (ptid_get_pid (currthread)), inferior_ptid))
+ struct inferior *inf = NULL;
+ int pid = ptid_get_pid (currthread);
+
+ if (ptid_is_pid (inferior_ptid)
+ && pid == ptid_get_pid (inferior_ptid))
{
/* inferior_ptid has no thread member yet. This can happen
with the vAttach -> remote_wait,"TAAthread:" path if the
stub doesn't support qC. This is the first stop reported
after an attach, so this is the main thread. Update the
ptid in the thread list. */
- thread_change_ptid (inferior_ptid, currthread);
+ if (in_thread_list (pid_to_ptid (pid)))
+ thread_change_ptid (inferior_ptid, currthread);
+ else
+ {
+ remote_add_thread (currthread, running);
+ inferior_ptid = currthread;
+ }
return;
}
return;
}
+ /* When connecting to a target remote, or to a target
+ extended-remote which already was debugging an inferior, we
+ may not know about it yet. Add it before adding its child
+ thread, so notifications are emitted in a sensible order. */
+ if (!in_inferior_list (ptid_get_pid (currthread)))
+ inf = remote_add_inferior (ptid_get_pid (currthread), -1);
+
/* This is really a new thread. Add it. */
- add_thread (currthread);
+ remote_add_thread (currthread, running);
+
+ /* If we found a new inferior, let the common code do whatever
+ it needs to with it (e.g., read shared libraries, insert
+ breakpoints). */
+ if (inf != NULL)
+ notice_new_inferior (currthread, running, 0);
}
+}
+
+/* Call this function as a result of
+ 1) A halt indication (T packet) containing a thread id
+ 2) A direct query of currthread
+ 3) Successful execution of set thread
+ */
+
+static void
+record_currthread (ptid_t currthread)
+{
+ general_thread = currthread;
+
+ if (ptid_equal (currthread, minus_one_ptid))
+ /* We're just invalidating the local thread mirror. */
+ return;
- if (!in_inferior_list (ptid_get_pid (currthread)))
- /* When connecting to a target remote, or to a target
- extended-remote which already was debugging an inferior, we may
- not know about it yet --- add it. */
- add_inferior (ptid_get_pid (currthread));
+ remote_notice_new_inferior (currthread, 0);
}
static char *last_pass_packet;
set_thread (ptid, 0);
}
+/* Change the remote current process. Which thread within the process
+ ends up selected isn't important, as long as it is the same process
+ as what INFERIOR_PTID points to.
+
+ This comes from that fact that there is no explicit notion of
+ "selected process" in the protocol. The selected process for
+ general operations is the process the selected general thread
+ belongs to. */
+
+static void
+set_general_process (void)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ /* If the remote can't handle multiple processes, don't bother. */
+ if (!remote_multi_process_p (rs))
+ return;
+
+ /* We only need to change the remote current thread if it's pointing
+ at some other process. */
+ if (ptid_get_pid (general_thread) != ptid_get_pid (inferior_ptid))
+ set_general_thread (inferior_ptid);
+}
+
\f
/* Return nonzero if the thread PTID is still alive on the remote
system. */
static int
-remote_thread_alive (ptid_t ptid)
+remote_thread_alive (struct target_ops *ops, ptid_t ptid)
{
struct remote_state *rs = get_remote_state ();
- int tid = ptid_get_tid (ptid);
char *p, *endp;
if (ptid_equal (ptid, magic_null_ptid))
char *p = buf;
char *pp;
ULONGEST pid = 0, tid = 0;
- ptid_t ptid;
if (*p == 'p')
{
pp = unpack_varlen_hex (p, &tid);
/* Since the stub is not sending a process id, then default to
- what's in inferior_ptid. */
- pid = ptid_get_pid (inferior_ptid);
+ what's in inferior_ptid, unless it's null at this point. If so,
+ then since there's no way to know the pid of the reported
+ threads, use the magic number. */
+ if (ptid_equal (inferior_ptid, null_ptid))
+ pid = ptid_get_pid (magic_null_ptid);
+ else
+ pid = ptid_get_pid (inferior_ptid);
if (obuf)
*obuf = pp;
pack_threadinfo_request (rs->buf, fieldset, threadid);
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
+
+ if (rs->buf[0] == '\0')
+ return 0;
+
result = remote_unpack_thread_info_response (rs->buf + 2,
threadid, info);
return result;
remote_current_thread (ptid_t oldpid)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- int tid;
- int pid;
putpkt ("qC");
getpkt (&rs->buf, &rs->buf_size, 0);
*/
static void
-remote_threads_info (void)
+remote_threads_info (struct target_ops *ops)
{
struct remote_state *rs = get_remote_state ();
char *bufp;
do
{
new_thread = read_ptid (bufp, &bufp);
- if (!ptid_equal (new_thread, null_ptid)
- && !in_thread_list (new_thread))
+ if (!ptid_equal (new_thread, null_ptid))
{
- if (!in_inferior_list (ptid_get_pid (new_thread)))
- /* When connected to a multi-process aware
- stub, "info threads" may show up threads of
- inferiors we didn't know about yet. Add
- them. */
- add_inferior (ptid_get_pid (new_thread));
-
- add_thread (new_thread);
+ /* In non-stop mode, we assume new found threads
+ are running until proven otherwise with a
+ stop reply. In all-stop, we can only get
+ here if all threads are stopped. */
+ int running = non_stop ? 1 : 0;
+
+ remote_notice_new_inferior (new_thread, running);
}
}
while (*bufp++ == ','); /* comma-separated list */
}
}
+ /* Only qfThreadInfo is supported in non-stop mode. */
+ if (non_stop)
+ return;
+
/* Else fall back to old method based on jmetzler protocol. */
use_threadinfo_query = 0;
remote_find_new_threads ();
static void
remote_close (int quitting)
{
- if (remote_desc)
- serial_close (remote_desc);
+ if (remote_desc == NULL)
+ return; /* already closed */
+
+ /* Make sure we leave stdin registered in the event loop, and we
+ don't leave the async SIGINT signal handler installed. */
+ remote_terminal_ours ();
+
+ serial_close (remote_desc);
remote_desc = NULL;
+
+ /* We don't have a connection to the remote stub anymore. Get rid
+ of all the inferiors and their threads we were controlling. */
+ discard_all_inferiors ();
+
+ /* We're no longer interested in any of these events. */
+ discard_pending_stop_replies (-1);
+
+ if (remote_async_inferior_event_token)
+ delete_async_event_handler (&remote_async_inferior_event_token);
+ if (remote_async_get_pending_events_token)
+ delete_async_event_handler (&remote_async_get_pending_events_token);
}
/* Query the remote side for the text, data and bss offsets. */
objfile_relocate (symfile_objfile, offs);
}
+/* Callback for iterate_over_threads. Set the STOP_REQUESTED flags in
+ threads we know are stopped already. This is used during the
+ initial remote connection in non-stop mode --- threads that are
+ reported as already being stopped are left stopped. */
+
+static int
+set_stop_requested_callback (struct thread_info *thread, void *data)
+{
+ /* If we have a stop reply for this thread, it must be stopped. */
+ if (peek_stop_reply (thread->ptid))
+ set_stop_requested (thread->ptid, 1);
+
+ return 0;
+}
+
/* Stub for catch_exception. */
struct start_remote_args
static void
remote_start_remote (struct ui_out *uiout, void *opaque)
{
- struct remote_state *rs = get_remote_state ();
struct start_remote_args *args = opaque;
+ struct remote_state *rs = get_remote_state ();
+ struct packet_config *noack_config;
char *wait_status = NULL;
immediate_quit++; /* Allow user to interrupt it. */
+ /* Ack any packet which the remote side has already sent. */
+ serial_write (remote_desc, "+", 1);
+
+ /* The first packet we send to the target is the optional "supported
+ packets" request. If the target can answer this, it will tell us
+ which later probes to skip. */
+ remote_query_supported ();
+
+ /* Next, we possibly activate noack mode.
+
+ If the QStartNoAckMode packet configuration is set to AUTO,
+ enable noack mode if the stub reported a wish for it with
+ qSupported.
+
+ If set to TRUE, then enable noack mode even if the stub didn't
+ report it in qSupported. If the stub doesn't reply OK, the
+ session ends with an error.
+
+ If FALSE, then don't activate noack mode, regardless of what the
+ stub claimed should be the default with qSupported. */
+
+ noack_config = &remote_protocol_packets[PACKET_QStartNoAckMode];
+
+ if (noack_config->detect == AUTO_BOOLEAN_TRUE
+ || (noack_config->detect == AUTO_BOOLEAN_AUTO
+ && noack_config->support == PACKET_ENABLE))
+ {
+ putpkt ("QStartNoAckMode");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (packet_ok (rs->buf, noack_config) == PACKET_OK)
+ rs->noack_mode = 1;
+ }
+
+ if (args->extended_p)
+ {
+ /* Tell the remote that we are using the extended protocol. */
+ putpkt ("!");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ }
+
+ /* Next, if the target can specify a description, read it. We do
+ this before anything involving memory or registers. */
+ target_find_description ();
+
+ /* On OSs where the list of libraries is global to all
+ processes, we fetch them early. */
+ if (gdbarch_has_global_solist (target_gdbarch))
+ solib_add (NULL, args->from_tty, args->target, auto_solib_add);
+
+ if (non_stop)
+ {
+ if (!rs->non_stop_aware)
+ error (_("Non-stop mode requested, but remote does not support non-stop"));
+
+ putpkt ("QNonStop:1");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ if (strcmp (rs->buf, "OK") != 0)
+ error ("Remote refused setting non-stop mode with: %s", rs->buf);
+
+ /* Find about threads and processes the stub is already
+ controlling. We default to adding them in the running state.
+ The '?' query below will then tell us about which threads are
+ stopped. */
+ remote_threads_info (args->target);
+ }
+ else if (rs->non_stop_aware)
+ {
+ /* Don't assume that the stub can operate in all-stop mode.
+ Request it explicitely. */
+ putpkt ("QNonStop:0");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ if (strcmp (rs->buf, "OK") != 0)
+ error ("Remote refused setting all-stop mode with: %s", rs->buf);
+ }
+
/* Check whether the target is running now. */
putpkt ("?");
getpkt (&rs->buf, &rs->buf_size, 0);
- if (rs->buf[0] == 'W' || rs->buf[0] == 'X')
+ if (!non_stop)
{
- if (args->extended_p)
+ if (rs->buf[0] == 'W' || rs->buf[0] == 'X')
{
+ if (!args->extended_p)
+ error (_("The target is not running (try extended-remote?)"));
+
/* We're connected, but not running. Drop out before we
call start_remote. */
- target_mark_exited (args->target);
return;
}
else
- error (_("The target is not running (try extended-remote?)"));
+ {
+ /* Save the reply for later. */
+ wait_status = alloca (strlen (rs->buf) + 1);
+ strcpy (wait_status, rs->buf);
+ }
+
+ /* Let the stub know that we want it to return the thread. */
+ set_continue_thread (minus_one_ptid);
+
+ /* Without this, some commands which require an active target
+ (such as kill) won't work. This variable serves (at least)
+ double duty as both the pid of the target process (if it has
+ such), and as a flag indicating that a target is active.
+ These functions should be split out into seperate variables,
+ especially since GDB will someday have a notion of debugging
+ several processes. */
+ inferior_ptid = magic_null_ptid;
+
+ /* Now, if we have thread information, update inferior_ptid. */
+ inferior_ptid = remote_current_thread (inferior_ptid);
+
+ remote_add_inferior (ptid_get_pid (inferior_ptid), -1);
+
+ /* Always add the main thread. */
+ add_thread_silent (inferior_ptid);
+
+ get_offsets (); /* Get text, data & bss offsets. */
+
+ /* If we could not find a description using qXfer, and we know
+ how to do it some other way, try again. This is not
+ supported for non-stop; it could be, but it is tricky if
+ there are no stopped threads when we connect. */
+ if (remote_read_description_p (args->target)
+ && gdbarch_target_desc (target_gdbarch) == NULL)
+ {
+ target_clear_description ();
+ target_find_description ();
+ }
+
+ /* Use the previously fetched status. */
+ gdb_assert (wait_status != NULL);
+ strcpy (rs->buf, wait_status);
+ rs->cached_wait_status = 1;
+
+ immediate_quit--;
+ start_remote (args->from_tty); /* Initialize gdb process mechanisms. */
}
else
{
- if (args->extended_p)
- target_mark_running (args->target);
+ /* Clear WFI global state. Do this before finding about new
+ threads and inferiors, and setting the current inferior.
+ Otherwise we would clear the proceed status of the current
+ inferior when we want its stop_soon state to be preserved
+ (see notice_new_inferior). */
+ init_wait_for_inferior ();
+
+ /* In non-stop, we will either get an "OK", meaning that there
+ are no stopped threads at this time; or, a regular stop
+ reply. In the latter case, there may be more than one thread
+ stopped --- we pull them all out using the vStopped
+ mechanism. */
+ if (strcmp (rs->buf, "OK") != 0)
+ {
+ struct stop_reply *stop_reply;
+ struct cleanup *old_chain;
- /* Save the reply for later. */
- wait_status = alloca (strlen (rs->buf) + 1);
- strcpy (wait_status, rs->buf);
- }
+ stop_reply = stop_reply_xmalloc ();
+ old_chain = make_cleanup (do_stop_reply_xfree, stop_reply);
- /* Start afresh. */
- init_thread_list ();
+ remote_parse_stop_reply (rs->buf, stop_reply);
+ discard_cleanups (old_chain);
- /* Let the stub know that we want it to return the thread. */
- set_continue_thread (minus_one_ptid);
+ /* get_pending_stop_replies acks this one, and gets the rest
+ out. */
+ pending_stop_reply = stop_reply;
+ remote_get_pending_stop_replies ();
- /* Without this, some commands which require an active target
- (such as kill) won't work. This variable serves (at least)
- double duty as both the pid of the target process (if it has
- such), and as a flag indicating that a target is active.
- These functions should be split out into seperate variables,
- especially since GDB will someday have a notion of debugging
- several processes. */
- inferior_ptid = magic_null_ptid;
+ /* Make sure that threads that were stopped remain
+ stopped. */
+ iterate_over_threads (set_stop_requested_callback, NULL);
+ }
- /* Now, if we have thread information, update inferior_ptid. */
- inferior_ptid = remote_current_thread (inferior_ptid);
+ if (target_can_async_p ())
+ target_async (inferior_event_handler, 0);
- add_inferior (ptid_get_pid (inferior_ptid));
+ if (thread_count () == 0)
+ {
+ if (!args->extended_p)
+ error (_("The target is not running (try extended-remote?)"));
- /* Always add the main thread. */
- add_thread_silent (inferior_ptid);
+ /* We're connected, but not running. Drop out before we
+ call start_remote. */
+ return;
+ }
+
+ /* Let the stub know that we want it to return the thread. */
- get_offsets (); /* Get text, data & bss offsets. */
+ /* Force the stub to choose a thread. */
+ set_general_thread (null_ptid);
- /* Use the previously fetched status. */
- gdb_assert (wait_status != NULL);
- strcpy (rs->buf, wait_status);
- rs->cached_wait_status = 1;
+ /* Query it. */
+ inferior_ptid = remote_current_thread (minus_one_ptid);
+ if (ptid_equal (inferior_ptid, minus_one_ptid))
+ error (_("remote didn't report the current thread in non-stop mode"));
- immediate_quit--;
- start_remote (args->from_tty); /* Initialize gdb process mechanisms. */
+ get_offsets (); /* Get text, data & bss offsets. */
+
+ /* In non-stop mode, any cached wait status will be stored in
+ the stop reply queue. */
+ gdb_assert (wait_status == NULL);
+ }
+
+ /* If we connected to a live target, do some additional setup. */
+ if (target_has_execution)
+ {
+ if (exec_bfd) /* No use without an exec file. */
+ remote_check_symbols (symfile_objfile);
+ }
+
+ /* If breakpoints are global, insert them now. */
+ if (gdbarch_has_global_breakpoints (target_gdbarch)
+ && breakpoints_always_inserted_mode ())
+ insert_breakpoints ();
}
/* Open a connection to a remote debugger.
if (remote_protocol_packets[PACKET_qSymbol].support == PACKET_DISABLE)
return;
+ /* Make sure the remote is pointing at the right process. */
+ set_general_process ();
+
/* Allocate a message buffer. We can't reuse the input buffer in RS,
because we need both at the same time. */
msg = alloca (get_remote_packet_size ());
xsnprintf (msg, get_remote_packet_size (), "qSymbol::%s", &reply[8]);
else
{
+ int addr_size = gdbarch_addr_bit (target_gdbarch) / 8;
CORE_ADDR sym_addr = SYMBOL_VALUE_ADDRESS (sym);
/* If this is a function address, return the start of code
¤t_target);
xsnprintf (msg, get_remote_packet_size (), "qSymbol:%s:%s",
- paddr_nz (sym_addr), &reply[8]);
+ phex_nz (sym_addr, addr_size), &reply[8]);
}
putpkt (msg);
rs->multi_process_aware = (support == PACKET_ENABLE);
}
+static void
+remote_non_stop_feature (const struct protocol_feature *feature,
+ enum packet_support support, const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+ rs->non_stop_aware = (support == PACKET_ENABLE);
+}
+
+static void
+remote_cond_tracepoint_feature (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+ rs->cond_tracepoints = (support == PACKET_ENABLE);
+}
+
static struct protocol_feature remote_protocol_features[] = {
{ "PacketSize", PACKET_DISABLE, remote_packet_size, -1 },
{ "qXfer:auxv:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_spu_read },
{ "qXfer:spu:write", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_spu_write },
+ { "qXfer:osdata:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_osdata },
{ "QPassSignals", PACKET_DISABLE, remote_supported_packet,
PACKET_QPassSignals },
{ "QStartNoAckMode", PACKET_DISABLE, remote_supported_packet,
PACKET_QStartNoAckMode },
{ "multiprocess", PACKET_DISABLE, remote_multi_process_feature, -1 },
+ { "QNonStop", PACKET_DISABLE, remote_non_stop_feature, -1 },
+ { "qXfer:siginfo:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_siginfo_read },
+ { "qXfer:siginfo:write", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_siginfo_write },
+ { "ConditionalTracepoints", PACKET_DISABLE, remote_cond_tracepoint_feature,
+ PACKET_ConditionalTracepoints },
+ { "ReverseContinue", PACKET_DISABLE, remote_supported_packet,
+ PACKET_bc },
+ { "ReverseStep", PACKET_DISABLE, remote_supported_packet,
+ PACKET_bs },
};
static void
remote_open_1 (char *name, int from_tty, struct target_ops *target, int extended_p)
{
struct remote_state *rs = get_remote_state ();
- struct packet_config *noack_config;
if (name == 0)
error (_("To open a remote debug connection, you need to specify what\n"
But if we're connected to a target system with no running process,
then we will still be connected when it returns. Ask this question
first, before target_preopen has a chance to kill anything. */
- if (remote_desc != NULL && !target_has_execution)
+ if (remote_desc != NULL && !have_inferiors ())
{
if (!from_tty
|| query (_("Already connected to a remote target. Disconnect? ")))
process, we may still be connected. If we are starting "target
remote" now, the extended-remote target will not have been
removed by unpush_target. */
- if (remote_desc != NULL && !target_has_execution)
+ if (remote_desc != NULL && !have_inferiors ())
pop_target ();
/* Make sure we send the passed signals list the next time we resume. */
}
push_target (target); /* Switch to using remote target now. */
- /* Assume that the target is running, unless we learn otherwise. */
- target_mark_running (target);
+ /* Register extra event sources in the event loop. */
+ remote_async_inferior_event_token
+ = create_async_event_handler (remote_async_inferior_event_handler,
+ NULL);
+ remote_async_get_pending_events_token
+ = create_async_event_handler (remote_async_get_pending_events_handler,
+ NULL);
/* Reset the target state; these things will be queried either by
remote_query_supported or as they are needed. */
init_all_packet_configs ();
+ rs->cached_wait_status = 0;
rs->explicit_packet_size = 0;
rs->noack_mode = 0;
rs->multi_process_aware = 0;
rs->extended = extended_p;
+ rs->non_stop_aware = 0;
+ rs->waiting_for_stop_reply = 0;
general_thread = not_sent_ptid;
continue_thread = not_sent_ptid;
use_threadinfo_query = 1;
use_threadextra_query = 1;
- /* Ack any packet which the remote side has already sent. */
- serial_write (remote_desc, "+", 1);
+ if (target_async_permitted)
+ {
+ /* With this target we start out by owning the terminal. */
+ remote_async_terminal_ours_p = 1;
- /* The first packet we send to the target is the optional "supported
- packets" request. If the target can answer this, it will tell us
- which later probes to skip. */
- remote_query_supported ();
+ /* FIXME: cagney/1999-09-23: During the initial connection it is
+ assumed that the target is already ready and able to respond to
+ requests. Unfortunately remote_start_remote() eventually calls
+ wait_for_inferior() with no timeout. wait_forever_enabled_p gets
+ around this. Eventually a mechanism that allows
+ wait_for_inferior() to expect/get timeouts will be
+ implemented. */
+ wait_forever_enabled_p = 0;
+ }
- /* Next, we possibly activate noack mode.
+ /* First delete any symbols previously loaded from shared libraries. */
+ no_shared_libraries (NULL, 0);
- If the QStartNoAckMode packet configuration is set to AUTO,
- enable noack mode if the stub reported a wish for it with
- qSupported.
-
- If set to TRUE, then enable noack mode even if the stub didn't
- report it in qSupported. If the stub doesn't reply OK, the
- session ends with an error.
-
- If FALSE, then don't activate noack mode, regardless of what the
- stub claimed should be the default with qSupported. */
-
- noack_config = &remote_protocol_packets[PACKET_QStartNoAckMode];
-
- if (noack_config->detect == AUTO_BOOLEAN_TRUE
- || (noack_config->detect == AUTO_BOOLEAN_AUTO
- && noack_config->support == PACKET_ENABLE))
- {
- putpkt ("QStartNoAckMode");
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (packet_ok (rs->buf, noack_config) == PACKET_OK)
- rs->noack_mode = 1;
- }
-
- /* Next, if the target can specify a description, read it. We do
- this before anything involving memory or registers. */
- target_find_description ();
-
- if (target_async_permitted)
- {
- /* With this target we start out by owning the terminal. */
- remote_async_terminal_ours_p = 1;
-
- /* FIXME: cagney/1999-09-23: During the initial connection it is
- assumed that the target is already ready and able to respond to
- requests. Unfortunately remote_start_remote() eventually calls
- wait_for_inferior() with no timeout. wait_forever_enabled_p gets
- around this. Eventually a mechanism that allows
- wait_for_inferior() to expect/get timeouts will be
- implemented. */
- wait_forever_enabled_p = 0;
- }
-
- /* First delete any symbols previously loaded from shared libraries. */
- no_shared_libraries (NULL, 0);
+ /* Start afresh. */
+ init_thread_list ();
/* Start the remote connection. If error() or QUIT, discard this
target (we'd otherwise be in an inconsistent state) and then
ex = catch_exception (uiout, remote_start_remote, &args, RETURN_MASK_ALL);
if (ex.reason < 0)
{
- pop_target ();
+ /* Pop the partially set up target - unless something else did
+ already before throwing the exception. */
+ if (remote_desc != NULL)
+ pop_target ();
if (target_async_permitted)
wait_forever_enabled_p = 1;
throw_exception (ex);
if (target_async_permitted)
wait_forever_enabled_p = 1;
-
- if (extended_p)
- {
- /* Tell the remote that we are using the extended protocol. */
- putpkt ("!");
- getpkt (&rs->buf, &rs->buf_size, 0);
- }
-
- /* If we connected to a live target, do some additional setup. */
- if (target_has_execution)
- {
- if (exec_bfd) /* No use without an exec file. */
- remote_check_symbols (symfile_objfile);
- }
}
/* This takes a program previously attached to and detaches it. After
else
error (_("Can't detach process."));
- /* Unregister the file descriptor from the event loop. */
- if (target_is_async_p ())
- serial_async (remote_desc, NULL, 0);
-
if (from_tty)
{
if (remote_multi_process_p (rs))
}
}
- detach_inferior (pid);
+ discard_pending_stop_replies (pid);
target_mourn_inferior ();
}
static void
-remote_detach (char *args, int from_tty)
+remote_detach (struct target_ops *ops, char *args, int from_tty)
{
remote_detach_1 (args, from_tty, 0);
}
static void
-extended_remote_detach (char *args, int from_tty)
+extended_remote_detach (struct target_ops *ops, char *args, int from_tty)
{
remote_detach_1 (args, from_tty, 1);
}
if (args)
error (_("Argument given to \"disconnect\" when remotely debugging."));
- /* Unregister the file descriptor from the event loop. */
- if (target_is_async_p ())
- serial_async (remote_desc, NULL, 0);
-
/* Make sure we unpush even the extended remote targets; mourn
won't do it. So call remote_mourn_1 directly instead of
target_mourn_inferior. */
int pid;
char *dummy;
char *wait_status = NULL;
- struct inferior *inf;
if (!args)
error_no_arg (_("process-id to attach"));
printf_unfiltered (_("Attached to %s\n"),
target_pid_to_str (pid_to_ptid (pid)));
- /* Save the reply for later. */
- wait_status = alloca (strlen (rs->buf) + 1);
- strcpy (wait_status, rs->buf);
+ if (!non_stop)
+ {
+ /* Save the reply for later. */
+ wait_status = alloca (strlen (rs->buf) + 1);
+ strcpy (wait_status, rs->buf);
+ }
+ else if (strcmp (rs->buf, "OK") != 0)
+ error (_("Attaching to %s failed with: %s"),
+ target_pid_to_str (pid_to_ptid (pid)),
+ rs->buf);
}
else if (remote_protocol_packets[PACKET_vAttach].support == PACKET_DISABLE)
error (_("This target does not support attaching to a process"));
error (_("Attaching to %s failed"),
target_pid_to_str (pid_to_ptid (pid)));
- target_mark_running (target);
+ remote_add_inferior (pid, 1);
+
inferior_ptid = pid_to_ptid (pid);
- /* Now, if we have thread information, update inferior_ptid. */
- inferior_ptid = remote_current_thread (inferior_ptid);
+ if (non_stop)
+ {
+ struct thread_info *thread;
- inf = add_inferior (pid);
- inf->attach_flag = 1;
+ /* Get list of threads. */
+ remote_threads_info (target);
- /* Now, add the main thread to the thread list. */
- add_thread_silent (inferior_ptid);
+ thread = first_thread_of_process (pid);
+ if (thread)
+ inferior_ptid = thread->ptid;
+ else
+ inferior_ptid = pid_to_ptid (pid);
+
+ /* Invalidate our notion of the remote current thread. */
+ record_currthread (minus_one_ptid);
+ }
+ else
+ {
+ /* Now, if we have thread information, update inferior_ptid. */
+ inferior_ptid = remote_current_thread (inferior_ptid);
+
+ /* Add the main thread to the thread list. */
+ add_thread_silent (inferior_ptid);
+ }
/* Next, if the target can specify a description, read it. We do
this before anything involving memory or registers. */
target_find_description ();
- /* Use the previously fetched status. */
- gdb_assert (wait_status != NULL);
- strcpy (rs->buf, wait_status);
- rs->cached_wait_status = 1;
+ if (!non_stop)
+ {
+ /* Use the previously fetched status. */
+ gdb_assert (wait_status != NULL);
+
+ if (target_can_async_p ())
+ {
+ struct stop_reply *stop_reply;
+ struct cleanup *old_chain;
+
+ stop_reply = stop_reply_xmalloc ();
+ old_chain = make_cleanup (do_stop_reply_xfree, stop_reply);
+ remote_parse_stop_reply (wait_status, stop_reply);
+ discard_cleanups (old_chain);
+ push_stop_reply (stop_reply);
+
+ target_async (inferior_event_handler, 0);
+ }
+ else
+ {
+ gdb_assert (wait_status != NULL);
+ strcpy (rs->buf, wait_status);
+ rs->cached_wait_status = 1;
+ }
+ }
+ else
+ gdb_assert (wait_status == NULL);
}
static void
-extended_remote_attach (char *args, int from_tty)
+extended_remote_attach (struct target_ops *ops, char *args, int from_tty)
{
- extended_remote_attach_1 (&extended_remote_ops, args, from_tty);
+ extended_remote_attach_1 (ops, args, from_tty);
}
/* Convert hex digit A to a number. */
support_S = 0;
support_c = 0;
support_C = 0;
+ rs->support_vCont_t = 0;
while (p && *p == ';')
{
p++;
support_c = 1;
else if (*p == 'C' && (*(p + 1) == ';' || *(p + 1) == 0))
support_C = 1;
+ else if (*p == 't' && (*(p + 1) == ';' || *(p + 1) == 0))
+ rs->support_vCont_t = 1;
p = strchr (p, ';');
}
packet_ok (buf, &remote_protocol_packets[PACKET_vCont]);
}
+/* Helper function for building "vCont" resumptions. Write a
+ resumption to P. ENDP points to one-passed-the-end of the buffer
+ we're allowed to write to. Returns BUF+CHARACTERS_WRITTEN. The
+ thread to be resumed is PTID; STEP and SIGGNAL indicate whether the
+ resumed thread should be single-stepped and/or signalled. If PTID
+ equals minus_one_ptid, then all threads are resumed; if PTID
+ represents a process, then all threads of the process are resumed;
+ the thread to be stepped and/or signalled is given in the global
+ INFERIOR_PTID. */
+
+static char *
+append_resumption (char *p, char *endp,
+ ptid_t ptid, int step, enum target_signal siggnal)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ if (step && siggnal != TARGET_SIGNAL_0)
+ p += xsnprintf (p, endp - p, ";S%02x", siggnal);
+ else if (step)
+ p += xsnprintf (p, endp - p, ";s");
+ else if (siggnal != TARGET_SIGNAL_0)
+ p += xsnprintf (p, endp - p, ";C%02x", siggnal);
+ else
+ p += xsnprintf (p, endp - p, ";c");
+
+ if (remote_multi_process_p (rs) && ptid_is_pid (ptid))
+ {
+ ptid_t nptid;
+
+ /* All (-1) threads of process. */
+ nptid = ptid_build (ptid_get_pid (ptid), 0, -1);
+
+ p += xsnprintf (p, endp - p, ":");
+ p = write_ptid (p, endp, nptid);
+ }
+ else if (!ptid_equal (ptid, minus_one_ptid))
+ {
+ p += xsnprintf (p, endp - p, ":");
+ p = write_ptid (p, endp, ptid);
+ }
+
+ return p;
+}
+
/* Resume the remote inferior by using a "vCont" packet. The thread
to be resumed is PTID; STEP and SIGGNAL indicate whether the
resumed thread should be single-stepped and/or signalled. If PTID
about overflowing BUF. Should there be a generic
"multi-part-packet" packet? */
+ p += xsnprintf (p, endp - p, "vCont");
+
if (ptid_equal (ptid, magic_null_ptid))
{
/* MAGIC_NULL_PTID means that we don't have any active threads,
so we don't have any TID numbers the inferior will
understand. Make sure to only send forms that do not specify
a TID. */
- if (step && siggnal != TARGET_SIGNAL_0)
- xsnprintf (p, endp - p, "vCont;S%02x", siggnal);
- else if (step)
- xsnprintf (p, endp - p, "vCont;s");
- else if (siggnal != TARGET_SIGNAL_0)
- xsnprintf (p, endp - p, "vCont;C%02x", siggnal);
- else
- xsnprintf (p, endp - p, "vCont;c");
+ p = append_resumption (p, endp, minus_one_ptid, step, siggnal);
}
- else if (ptid_equal (ptid, minus_one_ptid))
+ else if (ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid))
{
- /* Resume all threads, with preference for INFERIOR_PTID. */
- if (step && siggnal != TARGET_SIGNAL_0)
+ /* Resume all threads (of all processes, or of a single
+ process), with preference for INFERIOR_PTID. This assumes
+ inferior_ptid belongs to the set of all threads we are about
+ to resume. */
+ if (step || siggnal != TARGET_SIGNAL_0)
{
- /* Step inferior_ptid with signal. */
- p += xsnprintf (p, endp - p, "vCont;S%02x:", siggnal);
- p = write_ptid (p, endp, inferior_ptid);
- /* And continue others. */
- p += xsnprintf (p, endp - p, ";c");
+ /* Step inferior_ptid, with or without signal. */
+ p = append_resumption (p, endp, inferior_ptid, step, siggnal);
}
- else if (step)
- {
- /* Step inferior_ptid. */
- p += xsnprintf (p, endp - p, "vCont;s:");
- p = write_ptid (p, endp, inferior_ptid);
- /* And continue others. */
- p += xsnprintf (p, endp - p, ";c");
- }
- else if (siggnal != TARGET_SIGNAL_0)
- {
- /* Continue inferior_ptid with signal. */
- p += xsnprintf (p, endp - p, "vCont;C%02x:", siggnal);
- p = write_ptid (p, endp, inferior_ptid);
- /* And continue others. */
- p += xsnprintf (p, endp - p, ";c");
- }
- else
- xsnprintf (p, endp - p, "vCont;c");
+
+ /* And continue others without a signal. */
+ p = append_resumption (p, endp, ptid, /*step=*/ 0, TARGET_SIGNAL_0);
}
else
{
/* Scheduler locking; resume only PTID. */
- if (step && siggnal != TARGET_SIGNAL_0)
- {
- /* Step ptid with signal. */
- p += xsnprintf (p, endp - p, "vCont;S%02x:", siggnal);
- p = write_ptid (p, endp, ptid);
- }
- else if (step)
- {
- /* Step ptid. */
- p += xsnprintf (p, endp - p, "vCont;s:");
- p = write_ptid (p, endp, ptid);
- }
- else if (siggnal != TARGET_SIGNAL_0)
- {
- /* Continue ptid with signal. */
- p += xsnprintf (p, endp - p, "vCont;C%02x:", siggnal);
- p = write_ptid (p, endp, ptid);
- }
- else
- {
- /* Continue ptid. */
- p += xsnprintf (p, endp - p, "vCont;c:");
- p = write_ptid (p, endp, ptid);
- }
+ p = append_resumption (p, endp, ptid, step, siggnal);
}
gdb_assert (strlen (rs->buf) < get_remote_packet_size ());
putpkt (rs->buf);
+ if (non_stop)
+ {
+ /* In non-stop, the stub replies to vCont with "OK". The stop
+ reply will be reported asynchronously by means of a `%Stop'
+ notification. */
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (strcmp (rs->buf, "OK") != 0)
+ error (_("Unexpected vCont reply in non-stop mode: %s"), rs->buf);
+ }
+
return 1;
}
static int last_sent_step;
static void
-remote_resume (ptid_t ptid, int step, enum target_signal siggnal)
+remote_resume (struct target_ops *ops,
+ ptid_t ptid, int step, enum target_signal siggnal)
{
struct remote_state *rs = get_remote_state ();
char *buf;
remote_pass_signals ();
/* The vCont packet doesn't need to specify threads via Hc. */
- if (remote_vcont_resume (ptid, step, siggnal))
- goto done;
+ /* No reverse support (yet) for vCont. */
+ if (execution_direction != EXEC_REVERSE)
+ if (remote_vcont_resume (ptid, step, siggnal))
+ goto done;
/* All other supported resume packets do use Hc, so set the continue
thread. */
set_continue_thread (ptid);
buf = rs->buf;
- if (siggnal != TARGET_SIGNAL_0)
+ if (execution_direction == EXEC_REVERSE)
+ {
+ /* We don't pass signals to the target in reverse exec mode. */
+ if (info_verbose && siggnal != TARGET_SIGNAL_0)
+ warning (" - Can't pass signal %d to target in reverse: ignored.\n",
+ siggnal);
+
+ if (step
+ && remote_protocol_packets[PACKET_bs].support == PACKET_DISABLE)
+ error (_("Remote reverse-step not supported."));
+ if (!step
+ && remote_protocol_packets[PACKET_bc].support == PACKET_DISABLE)
+ error (_("Remote reverse-continue not supported."));
+
+ strcpy (buf, step ? "bs" : "bc");
+ }
+ else if (siggnal != TARGET_SIGNAL_0)
{
buf[0] = step ? 'S' : 'C';
buf[1] = tohex (((int) siggnal >> 4) & 0xf);
NOT asynchronously. */
if (target_can_async_p ())
target_async (inferior_event_handler, 0);
+
+ /* We've just told the target to resume. The remote server will
+ wait for the inferior to stop, and then send a stop reply. In
+ the mean time, we can't start another command/query ourselves
+ because the stub wouldn't be ready to process it. This applies
+ only to the base all-stop protocol, however. In non-stop (which
+ only supports vCont), the stub replies with an "OK", and is
+ immediate able to process further serial input. */
+ if (!non_stop)
+ rs->waiting_for_stop_reply = 1;
}
\f
signal (signo, remote_interrupt);
}
+/* Non-stop version of target_stop. Uses `vCont;t' to stop a remote
+ thread, all threads of a remote process, or all threads of all
+ processes. */
+
+static void
+remote_stop_ns (ptid_t ptid)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ char *endp = rs->buf + get_remote_packet_size ();
+
+ if (remote_protocol_packets[PACKET_vCont].support == PACKET_SUPPORT_UNKNOWN)
+ remote_vcont_probe (rs);
+
+ if (!rs->support_vCont_t)
+ error (_("Remote server does not support stopping threads"));
+
+ if (ptid_equal (ptid, minus_one_ptid)
+ || (!remote_multi_process_p (rs) && ptid_is_pid (ptid)))
+ p += xsnprintf (p, endp - p, "vCont;t");
+ else
+ {
+ ptid_t nptid;
+
+ p += xsnprintf (p, endp - p, "vCont;t:");
+
+ if (ptid_is_pid (ptid))
+ /* All (-1) threads of process. */
+ nptid = ptid_build (ptid_get_pid (ptid), 0, -1);
+ else
+ {
+ /* Small optimization: if we already have a stop reply for
+ this thread, no use in telling the stub we want this
+ stopped. */
+ if (peek_stop_reply (ptid))
+ return;
+
+ nptid = ptid;
+ }
+
+ p = write_ptid (p, endp, nptid);
+ }
+
+ /* In non-stop, we get an immediate OK reply. The stop reply will
+ come in asynchronously by notification. */
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (strcmp (rs->buf, "OK") != 0)
+ error (_("Stopping %s failed: %s"), target_pid_to_str (ptid), rs->buf);
+}
+
+/* All-stop version of target_stop. Sends a break or a ^C to stop the
+ remote target. It is undefined which thread of which process
+ reports the stop. */
+
+static void
+remote_stop_as (ptid_t ptid)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ /* If the inferior is stopped already, but the core didn't know
+ about it yet, just ignore the request. The cached wait status
+ will be collected in remote_wait. */
+ if (rs->cached_wait_status)
+ return;
+
+ /* Send a break or a ^C, depending on user preference. */
+
+ if (remote_break)
+ serial_send_break (remote_desc);
+ else
+ serial_write (remote_desc, "\003", 1);
+}
+
/* This is the generic stop called via the target vector. When a target
interrupt is requested, either by the command line or the GUI, we
will eventually end up here. */
+
static void
remote_stop (ptid_t ptid)
{
- /* Send a break or a ^C, depending on user preference. */
if (remote_debug)
fprintf_unfiltered (gdb_stdlog, "remote_stop called\n");
- if (remote_break)
- serial_send_break (remote_desc);
+ if (non_stop)
+ remote_stop_ns (ptid);
else
- serial_write (remote_desc, "\003", 1);
+ remote_stop_as (ptid);
}
/* Ask the user what to do when an interrupt is received. */
{
target_terminal_ours ();
- if (query ("Interrupted while waiting for the program.\n\
-Give up (and stop debugging it)? "))
+ if (target_can_async_p ())
{
- target_mourn_inferior ();
signal (SIGINT, handle_sigint);
deprecated_throw_reason (RETURN_QUIT);
}
+ else
+ {
+ if (query (_("Interrupted while waiting for the program.\n\
+Give up (and stop debugging it)? ")))
+ {
+ pop_target ();
+ deprecated_throw_reason (RETURN_QUIT);
+ }
+ }
target_terminal_inferior ();
}
/* Nothing to do. */
return;
- /* FIXME: cagney/1999-09-27: Shouldn't need to test for
- sync_execution here. This function should only be called when
- GDB is resuming the inferior in the forground. A background
- resume (``run&'') should leave GDB in control of the terminal and
- consequently should not call this code. */
- if (!sync_execution)
- return;
- /* FIXME: cagney/1999-09-27: Closely related to the above. Make
- calls target_terminal_*() idenpotent. The event-loop GDB talking
- to an asynchronous target with a synchronous command calls this
- function from both event-top.c and infrun.c/infcmd.c. Once GDB
- stops trying to transfer the terminal to the target when it
- shouldn't this guard can go away. */
+ /* FIXME: cagney/1999-09-27: Make calls to target_terminal_*()
+ idempotent. The event-loop GDB talking to an asynchronous target
+ with a synchronous command calls this function from both
+ event-top.c and infrun.c/infcmd.c. Once GDB stops trying to
+ transfer the terminal to the target when it shouldn't this guard
+ can go away. */
if (!remote_async_terminal_ours_p)
return;
delete_file_handler (input_fd);
return;
/* See FIXME in remote_terminal_inferior. */
- if (!sync_execution)
- return;
- /* See FIXME in remote_terminal_inferior. */
if (remote_async_terminal_ours_p)
return;
cleanup_sigint_signal_handler (NULL);
tb[1] = 0;
fputs_unfiltered (tb, gdb_stdtarg);
}
- gdb_flush (gdb_stdtarg);
+ gdb_flush (gdb_stdtarg);
+ }
+
+typedef struct cached_reg
+{
+ int num;
+ gdb_byte data[MAX_REGISTER_SIZE];
+} cached_reg_t;
+
+DEF_VEC_O(cached_reg_t);
+
+struct stop_reply
+{
+ struct stop_reply *next;
+
+ ptid_t ptid;
+
+ struct target_waitstatus ws;
+
+ VEC(cached_reg_t) *regcache;
+
+ int stopped_by_watchpoint_p;
+ CORE_ADDR watch_data_address;
+
+ int solibs_changed;
+ int replay_event;
+};
+
+/* The list of already fetched and acknowledged stop events. */
+static struct stop_reply *stop_reply_queue;
+
+static struct stop_reply *
+stop_reply_xmalloc (void)
+{
+ struct stop_reply *r = XMALLOC (struct stop_reply);
+ r->next = NULL;
+ return r;
}
-/* Wait until the remote machine stops, then return,
- storing status in STATUS just as `wait' would. */
+static void
+stop_reply_xfree (struct stop_reply *r)
+{
+ if (r != NULL)
+ {
+ VEC_free (cached_reg_t, r->regcache);
+ xfree (r);
+ }
+}
-static ptid_t
-remote_wait (ptid_t ptid, struct target_waitstatus *status)
+/* Discard all pending stop replies of inferior PID. If PID is -1,
+ discard everything. */
+
+static void
+discard_pending_stop_replies (int pid)
{
- struct remote_state *rs = get_remote_state ();
- struct remote_arch_state *rsa = get_remote_arch_state ();
- ptid_t event_ptid = null_ptid;
- ULONGEST addr;
- int solibs_changed = 0;
+ struct stop_reply *prev = NULL, *reply, *next;
- status->kind = TARGET_WAITKIND_EXITED;
- status->value.integer = 0;
+ /* Discard the in-flight notification. */
+ if (pending_stop_reply != NULL
+ && (pid == -1
+ || ptid_get_pid (pending_stop_reply->ptid) == pid))
+ {
+ stop_reply_xfree (pending_stop_reply);
+ pending_stop_reply = NULL;
+ }
- while (1)
+ /* Discard the stop replies we have already pulled with
+ vStopped. */
+ for (reply = stop_reply_queue; reply; reply = next)
{
- char *buf, *p;
+ next = reply->next;
+ if (pid == -1
+ || ptid_get_pid (reply->ptid) == pid)
+ {
+ if (reply == stop_reply_queue)
+ stop_reply_queue = reply->next;
+ else
+ prev->next = reply->next;
- if (rs->cached_wait_status)
- /* Use the cached wait status, but only once. */
- rs->cached_wait_status = 0;
+ stop_reply_xfree (reply);
+ }
else
+ prev = reply;
+ }
+}
+
+/* Cleanup wrapper. */
+
+static void
+do_stop_reply_xfree (void *arg)
+{
+ struct stop_reply *r = arg;
+ stop_reply_xfree (r);
+}
+
+/* Look for a queued stop reply belonging to PTID. If one is found,
+ remove it from the queue, and return it. Returns NULL if none is
+ found. If there are still queued events left to process, tell the
+ event loop to get back to target_wait soon. */
+
+static struct stop_reply *
+queued_stop_reply (ptid_t ptid)
+{
+ struct stop_reply *it, *prev;
+ struct stop_reply head;
+
+ head.next = stop_reply_queue;
+ prev = &head;
+
+ it = head.next;
+
+ if (!ptid_equal (ptid, minus_one_ptid))
+ for (; it; prev = it, it = it->next)
+ if (ptid_equal (ptid, it->ptid))
+ break;
+
+ if (it)
+ {
+ prev->next = it->next;
+ it->next = NULL;
+ }
+
+ stop_reply_queue = head.next;
+
+ if (stop_reply_queue)
+ /* There's still at least an event left. */
+ mark_async_event_handler (remote_async_inferior_event_token);
+
+ return it;
+}
+
+/* Push a fully parsed stop reply in the stop reply queue. Since we
+ know that we now have at least one queued event left to pass to the
+ core side, tell the event loop to get back to target_wait soon. */
+
+static void
+push_stop_reply (struct stop_reply *new_event)
+{
+ struct stop_reply *event;
+
+ if (stop_reply_queue)
+ {
+ for (event = stop_reply_queue;
+ event && event->next;
+ event = event->next)
+ ;
+
+ event->next = new_event;
+ }
+ else
+ stop_reply_queue = new_event;
+
+ mark_async_event_handler (remote_async_inferior_event_token);
+}
+
+/* Returns true if we have a stop reply for PTID. */
+
+static int
+peek_stop_reply (ptid_t ptid)
+{
+ struct stop_reply *it;
+
+ for (it = stop_reply_queue; it; it = it->next)
+ if (ptid_equal (ptid, it->ptid))
+ {
+ if (it->ws.kind == TARGET_WAITKIND_STOPPED)
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Parse the stop reply in BUF. Either the function succeeds, and the
+ result is stored in EVENT, or throws an error. */
+
+static void
+remote_parse_stop_reply (char *buf, struct stop_reply *event)
+{
+ struct remote_arch_state *rsa = get_remote_arch_state ();
+ ULONGEST addr;
+ char *p;
+
+ event->ptid = null_ptid;
+ event->ws.kind = TARGET_WAITKIND_IGNORE;
+ event->ws.value.integer = 0;
+ event->solibs_changed = 0;
+ event->replay_event = 0;
+ event->stopped_by_watchpoint_p = 0;
+ event->regcache = NULL;
+
+ switch (buf[0])
+ {
+ case 'T': /* Status with PC, SP, FP, ... */
+ /* Expedited reply, containing Signal, {regno, reg} repeat. */
+ /* format is: 'Tssn...:r...;n...:r...;n...:r...;#cc', where
+ ss = signal number
+ n... = register number
+ r... = register contents
+ */
+
+ p = &buf[3]; /* after Txx */
+ while (*p)
{
- if (!target_is_async_p ())
+ char *p1;
+ char *p_temp;
+ int fieldsize;
+ LONGEST pnum = 0;
+
+ /* If the packet contains a register number, save it in
+ pnum and set p1 to point to the character following it.
+ Otherwise p1 points to p. */
+
+ /* If this packet is an awatch packet, don't parse the 'a'
+ as a register number. */
+
+ if (strncmp (p, "awatch", strlen("awatch")) != 0)
+ {
+ /* Read the ``P'' register number. */
+ pnum = strtol (p, &p_temp, 16);
+ p1 = p_temp;
+ }
+ else
+ p1 = p;
+
+ if (p1 == p) /* No register number present here. */
{
- ofunc = signal (SIGINT, remote_interrupt);
- /* If the user hit C-c before this packet, or between packets,
- pretend that it was hit right here. */
- if (quit_flag)
+ p1 = strchr (p, ':');
+ if (p1 == NULL)
+ error (_("Malformed packet(a) (missing colon): %s\n\
+Packet: '%s'\n"),
+ p, buf);
+ if (strncmp (p, "thread", p1 - p) == 0)
+ event->ptid = read_ptid (++p1, &p);
+ else if ((strncmp (p, "watch", p1 - p) == 0)
+ || (strncmp (p, "rwatch", p1 - p) == 0)
+ || (strncmp (p, "awatch", p1 - p) == 0))
+ {
+ event->stopped_by_watchpoint_p = 1;
+ p = unpack_varlen_hex (++p1, &addr);
+ event->watch_data_address = (CORE_ADDR) addr;
+ }
+ else if (strncmp (p, "library", p1 - p) == 0)
+ {
+ p1++;
+ p_temp = p1;
+ while (*p_temp && *p_temp != ';')
+ p_temp++;
+
+ event->solibs_changed = 1;
+ p = p_temp;
+ }
+ else if (strncmp (p, "replaylog", p1 - p) == 0)
{
- quit_flag = 0;
- remote_interrupt (SIGINT);
+ /* NO_HISTORY event.
+ p1 will indicate "begin" or "end", but
+ it makes no difference for now, so ignore it. */
+ event->replay_event = 1;
+ p_temp = strchr (p1 + 1, ';');
+ if (p_temp)
+ p = p_temp;
+ }
+ else
+ {
+ /* Silently skip unknown optional info. */
+ p_temp = strchr (p1 + 1, ';');
+ if (p_temp)
+ p = p_temp;
}
}
- /* FIXME: cagney/1999-09-27: If we're in async mode we should
- _never_ wait for ever -> test on target_is_async_p().
- However, before we do that we need to ensure that the caller
- knows how to take the target into/out of async mode. */
- getpkt (&rs->buf, &rs->buf_size, wait_forever_enabled_p);
- if (!target_is_async_p ())
- signal (SIGINT, ofunc);
- }
+ else
+ {
+ struct packet_reg *reg = packet_reg_from_pnum (rsa, pnum);
+ cached_reg_t cached_reg;
- buf = rs->buf;
+ p = p1;
+
+ if (*p != ':')
+ error (_("Malformed packet(b) (missing colon): %s\n\
+Packet: '%s'\n"),
+ p, buf);
+ ++p;
+
+ if (reg == NULL)
+ error (_("Remote sent bad register number %s: %s\n\
+Packet: '%s'\n"),
+ phex_nz (pnum, 0), p, buf);
+
+ cached_reg.num = reg->regnum;
- remote_stopped_by_watchpoint_p = 0;
+ fieldsize = hex2bin (p, cached_reg.data,
+ register_size (target_gdbarch,
+ reg->regnum));
+ p += 2 * fieldsize;
+ if (fieldsize < register_size (target_gdbarch,
+ reg->regnum))
+ warning (_("Remote reply is too short: %s"), buf);
- switch (buf[0])
+ VEC_safe_push (cached_reg_t, event->regcache, &cached_reg);
+ }
+
+ if (*p != ';')
+ error (_("Remote register badly formatted: %s\nhere: %s"),
+ buf, p);
+ ++p;
+ }
+ /* fall through */
+ case 'S': /* Old style status, just signal only. */
+ if (event->solibs_changed)
+ event->ws.kind = TARGET_WAITKIND_LOADED;
+ else if (event->replay_event)
+ event->ws.kind = TARGET_WAITKIND_NO_HISTORY;
+ else
{
- case 'E': /* Error of some sort. */
- /* We're out of sync with the target now. Did it continue or not?
- Not is more likely, so report a stop. */
- warning (_("Remote failure reply: %s"), buf);
- status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = TARGET_SIGNAL_0;
- goto got_status;
- case 'F': /* File-I/O request. */
- remote_fileio_request (buf);
- continue;
- case 'T': /* Status with PC, SP, FP, ... */
+ event->ws.kind = TARGET_WAITKIND_STOPPED;
+ event->ws.value.sig = (enum target_signal)
+ (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
+ }
+ break;
+ case 'W': /* Target exited. */
+ case 'X':
+ {
+ char *p;
+ int pid;
+ ULONGEST value;
+
+ /* GDB used to accept only 2 hex chars here. Stubs should
+ only send more if they detect GDB supports multi-process
+ support. */
+ p = unpack_varlen_hex (&buf[1], &value);
+
+ if (buf[0] == 'W')
+ {
+ /* The remote process exited. */
+ event->ws.kind = TARGET_WAITKIND_EXITED;
+ event->ws.value.integer = value;
+ }
+ else
{
- gdb_byte regs[MAX_REGISTER_SIZE];
+ /* The remote process exited with a signal. */
+ event->ws.kind = TARGET_WAITKIND_SIGNALLED;
+ event->ws.value.sig = (enum target_signal) value;
+ }
- /* Expedited reply, containing Signal, {regno, reg} repeat. */
- /* format is: 'Tssn...:r...;n...:r...;n...:r...;#cc', where
- ss = signal number
- n... = register number
- r... = register contents
- */
- p = &buf[3]; /* after Txx */
+ /* If no process is specified, assume inferior_ptid. */
+ pid = ptid_get_pid (inferior_ptid);
+ if (*p == '\0')
+ ;
+ else if (*p == ';')
+ {
+ p++;
- while (*p)
+ if (p == '\0')
+ ;
+ else if (strncmp (p,
+ "process:", sizeof ("process:") - 1) == 0)
{
- char *p1;
- char *p_temp;
- int fieldsize;
- LONGEST pnum = 0;
+ ULONGEST upid;
+ p += sizeof ("process:") - 1;
+ unpack_varlen_hex (p, &upid);
+ pid = upid;
+ }
+ else
+ error (_("unknown stop reply packet: %s"), buf);
+ }
+ else
+ error (_("unknown stop reply packet: %s"), buf);
+ event->ptid = pid_to_ptid (pid);
+ }
+ break;
+ }
- /* If the packet contains a register number, save it
- in pnum and set p1 to point to the character
- following it. Otherwise p1 points to p. */
+ if (non_stop && ptid_equal (event->ptid, null_ptid))
+ error (_("No process or thread specified in stop reply: %s"), buf);
+}
- /* If this packet is an awatch packet, don't parse the
- 'a' as a register number. */
+/* When the stub wants to tell GDB about a new stop reply, it sends a
+ stop notification (%Stop). Those can come it at any time, hence,
+ we have to make sure that any pending putpkt/getpkt sequence we're
+ making is finished, before querying the stub for more events with
+ vStopped. E.g., if we started a vStopped sequence immediatelly
+ upon receiving the %Stop notification, something like this could
+ happen:
- if (strncmp (p, "awatch", strlen("awatch")) != 0)
- {
- /* Read the ``P'' register number. */
- pnum = strtol (p, &p_temp, 16);
- p1 = p_temp;
- }
- else
- p1 = p;
+ 1.1) --> Hg 1
+ 1.2) <-- OK
+ 1.3) --> g
+ 1.4) <-- %Stop
+ 1.5) --> vStopped
+ 1.6) <-- (registers reply to step #1.3)
- if (p1 == p) /* No register number present here. */
- {
- p1 = strchr (p, ':');
- if (p1 == NULL)
- error (_("Malformed packet(a) (missing colon): %s\n\
-Packet: '%s'\n"),
- p, buf);
- if (strncmp (p, "thread", p1 - p) == 0)
- event_ptid = read_ptid (++p1, &p);
- else if ((strncmp (p, "watch", p1 - p) == 0)
- || (strncmp (p, "rwatch", p1 - p) == 0)
- || (strncmp (p, "awatch", p1 - p) == 0))
- {
- remote_stopped_by_watchpoint_p = 1;
- p = unpack_varlen_hex (++p1, &addr);
- remote_watch_data_address = (CORE_ADDR)addr;
- }
- else if (strncmp (p, "library", p1 - p) == 0)
- {
- p1++;
- p_temp = p1;
- while (*p_temp && *p_temp != ';')
- p_temp++;
+ Obviously, the reply in step #1.6 would be unexpected to a vStopped
+ query.
- solibs_changed = 1;
- p = p_temp;
- }
- else
- {
- /* Silently skip unknown optional info. */
- p_temp = strchr (p1 + 1, ';');
- if (p_temp)
- p = p_temp;
- }
- }
- else
- {
- struct packet_reg *reg = packet_reg_from_pnum (rsa, pnum);
- p = p1;
+ To solve this, whenever we parse a %Stop notification sucessfully,
+ we mark the REMOTE_ASYNC_GET_PENDING_EVENTS_TOKEN, and carry on
+ doing whatever we were doing:
- if (*p != ':')
- error (_("Malformed packet(b) (missing colon): %s\n\
-Packet: '%s'\n"),
- p, buf);
- ++p;
+ 2.1) --> Hg 1
+ 2.2) <-- OK
+ 2.3) --> g
+ 2.4) <-- %Stop
+ <GDB marks the REMOTE_ASYNC_GET_PENDING_EVENTS_TOKEN>
+ 2.5) <-- (registers reply to step #2.3)
- if (reg == NULL)
- error (_("Remote sent bad register number %s: %s\n\
-Packet: '%s'\n"),
- phex_nz (pnum, 0), p, buf);
-
- fieldsize = hex2bin (p, regs,
- register_size (target_gdbarch,
- reg->regnum));
- p += 2 * fieldsize;
- if (fieldsize < register_size (target_gdbarch,
- reg->regnum))
- warning (_("Remote reply is too short: %s"), buf);
- regcache_raw_supply (get_current_regcache (),
- reg->regnum, regs);
- }
+ Eventualy after step #2.5, we return to the event loop, which
+ notices there's an event on the
+ REMOTE_ASYNC_GET_PENDING_EVENTS_TOKEN event and calls the
+ associated callback --- the function below. At this point, we're
+ always safe to start a vStopped sequence. :
- if (*p != ';')
- error (_("Remote register badly formatted: %s\nhere: %s"),
- buf, p);
- ++p;
- }
- }
- /* fall through */
- case 'S': /* Old style status, just signal only. */
- if (solibs_changed)
- status->kind = TARGET_WAITKIND_LOADED;
+ 2.6) --> vStopped
+ 2.7) <-- T05 thread:2
+ 2.8) --> vStopped
+ 2.9) --> OK
+*/
+
+static void
+remote_get_pending_stop_replies (void)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ if (pending_stop_reply)
+ {
+ /* acknowledge */
+ putpkt ("vStopped");
+
+ /* Now we can rely on it. */
+ push_stop_reply (pending_stop_reply);
+ pending_stop_reply = NULL;
+
+ while (1)
+ {
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (strcmp (rs->buf, "OK") == 0)
+ break;
else
{
- status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = (enum target_signal)
- (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
+ struct cleanup *old_chain;
+ struct stop_reply *stop_reply = stop_reply_xmalloc ();
+
+ old_chain = make_cleanup (do_stop_reply_xfree, stop_reply);
+ remote_parse_stop_reply (rs->buf, stop_reply);
+
+ /* acknowledge */
+ putpkt ("vStopped");
+
+ if (stop_reply->ws.kind != TARGET_WAITKIND_IGNORE)
+ {
+ /* Now we can rely on it. */
+ discard_cleanups (old_chain);
+ push_stop_reply (stop_reply);
+ }
+ else
+ /* We got an unknown stop reply. */
+ do_cleanups (old_chain);
}
- goto got_status;
- case 'W': /* Target exited. */
- case 'X':
- {
- char *p;
- int pid;
- ULONGEST value;
+ }
+ }
+}
- /* GDB used to accept only 2 hex chars here. Stubs should
- only send more if they detect GDB supports
- multi-process support. */
- p = unpack_varlen_hex (&buf[1], &value);
- if (buf[0] == 'W')
- {
- /* The remote process exited. */
- status->kind = TARGET_WAITKIND_EXITED;
- status->value.integer = value;
- }
- else
- {
- /* The remote process exited with a signal. */
- status->kind = TARGET_WAITKIND_SIGNALLED;
- status->value.sig = (enum target_signal) value;
- }
+/* Called when it is decided that STOP_REPLY holds the info of the
+ event that is to be returned to the core. This function always
+ destroys STOP_REPLY. */
- /* If no process is specified, assume inferior_ptid. */
- pid = ptid_get_pid (inferior_ptid);
- if (*p == '\0')
- ;
- else if (*p == ';')
- {
- p++;
+static ptid_t
+process_stop_reply (struct stop_reply *stop_reply,
+ struct target_waitstatus *status)
+{
+ ptid_t ptid;
- if (p == '\0')
- ;
- else if (strncmp (p,
- "process:", sizeof ("process:") - 1) == 0)
- {
- ULONGEST upid;
- p += sizeof ("process:") - 1;
- unpack_varlen_hex (p, &upid);
- pid = upid;
- }
- else
- error (_("unknown stop reply packet: %s"), buf);
- }
- else
- error (_("unknown stop reply packet: %s"), buf);
- event_ptid = ptid_build (pid, 0, 0);
- goto got_status;
+ *status = stop_reply->ws;
+ ptid = stop_reply->ptid;
+
+ /* If no thread/process was reported by the stub, assume the current
+ inferior. */
+ if (ptid_equal (ptid, null_ptid))
+ ptid = inferior_ptid;
+
+ if (status->kind != TARGET_WAITKIND_EXITED
+ && status->kind != TARGET_WAITKIND_SIGNALLED)
+ {
+ /* Expedited registers. */
+ if (stop_reply->regcache)
+ {
+ struct regcache *regcache
+ = get_thread_arch_regcache (ptid, target_gdbarch);
+ cached_reg_t *reg;
+ int ix;
+
+ for (ix = 0;
+ VEC_iterate(cached_reg_t, stop_reply->regcache, ix, reg);
+ ix++)
+ regcache_raw_supply (regcache, reg->num, reg->data);
+ VEC_free (cached_reg_t, stop_reply->regcache);
+ }
+
+ remote_stopped_by_watchpoint_p = stop_reply->stopped_by_watchpoint_p;
+ remote_watch_data_address = stop_reply->watch_data_address;
+
+ remote_notice_new_inferior (ptid, 0);
+ }
+
+ stop_reply_xfree (stop_reply);
+ return ptid;
+}
+
+/* The non-stop mode version of target_wait. */
+
+static ptid_t
+remote_wait_ns (ptid_t ptid, struct target_waitstatus *status, int options)
+{
+ struct remote_state *rs = get_remote_state ();
+ struct stop_reply *stop_reply;
+ int ret;
+
+ /* If in non-stop mode, get out of getpkt even if a
+ notification is received. */
+
+ ret = getpkt_or_notif_sane (&rs->buf, &rs->buf_size,
+ 0 /* forever */);
+ while (1)
+ {
+ if (ret != -1)
+ switch (rs->buf[0])
+ {
+ case 'E': /* Error of some sort. */
+ /* We're out of sync with the target now. Did it continue
+ or not? We can't tell which thread it was in non-stop,
+ so just ignore this. */
+ warning (_("Remote failure reply: %s"), rs->buf);
+ break;
+ case 'O': /* Console output. */
+ remote_console_output (rs->buf + 1);
+ break;
+ default:
+ warning (_("Invalid remote reply: %s"), rs->buf);
+ break;
}
- case 'O': /* Console output. */
- remote_console_output (buf + 1);
- if (target_can_async_p ())
- {
- /* Return immediately to the event loop. The event loop
- will still be waiting on the inferior afterwards. */
- status->kind = TARGET_WAITKIND_IGNORE;
- goto got_status;
- }
- else
- continue;
- case '\0':
- if (last_sent_signal != TARGET_SIGNAL_0)
+
+ /* Acknowledge a pending stop reply that may have arrived in the
+ mean time. */
+ if (pending_stop_reply != NULL)
+ remote_get_pending_stop_replies ();
+
+ /* If indeed we noticed a stop reply, we're done. */
+ stop_reply = queued_stop_reply (ptid);
+ if (stop_reply != NULL)
+ return process_stop_reply (stop_reply, status);
+
+ /* Still no event. If we're just polling for an event, then
+ return to the event loop. */
+ if (options & TARGET_WNOHANG)
+ {
+ status->kind = TARGET_WAITKIND_IGNORE;
+ return minus_one_ptid;
+ }
+
+ /* Otherwise do a blocking wait. */
+ ret = getpkt_or_notif_sane (&rs->buf, &rs->buf_size,
+ 1 /* forever */);
+ }
+}
+
+/* Wait until the remote machine stops, then return, storing status in
+ STATUS just as `wait' would. */
+
+static ptid_t
+remote_wait_as (ptid_t ptid, struct target_waitstatus *status, int options)
+{
+ struct remote_state *rs = get_remote_state ();
+ ptid_t event_ptid = null_ptid;
+ char *buf;
+ struct stop_reply *stop_reply;
+
+ again:
+
+ status->kind = TARGET_WAITKIND_IGNORE;
+ status->value.integer = 0;
+
+ stop_reply = queued_stop_reply (ptid);
+ if (stop_reply != NULL)
+ return process_stop_reply (stop_reply, status);
+
+ if (rs->cached_wait_status)
+ /* Use the cached wait status, but only once. */
+ rs->cached_wait_status = 0;
+ else
+ {
+ int ret;
+
+ if (!target_is_async_p ())
+ {
+ ofunc = signal (SIGINT, remote_interrupt);
+ /* If the user hit C-c before this packet, or between packets,
+ pretend that it was hit right here. */
+ if (quit_flag)
{
- /* Zero length reply means that we tried 'S' or 'C' and
- the remote system doesn't support it. */
- target_terminal_ours_for_output ();
- printf_filtered
- ("Can't send signals to this remote system. %s not sent.\n",
- target_signal_to_name (last_sent_signal));
- last_sent_signal = TARGET_SIGNAL_0;
- target_terminal_inferior ();
-
- strcpy ((char *) buf, last_sent_step ? "s" : "c");
- putpkt ((char *) buf);
- continue;
+ quit_flag = 0;
+ remote_interrupt (SIGINT);
}
- /* else fallthrough */
- default:
- warning (_("Invalid remote reply: %s"), buf);
- continue;
}
+
+ /* FIXME: cagney/1999-09-27: If we're in async mode we should
+ _never_ wait for ever -> test on target_is_async_p().
+ However, before we do that we need to ensure that the caller
+ knows how to take the target into/out of async mode. */
+ ret = getpkt_sane (&rs->buf, &rs->buf_size, wait_forever_enabled_p);
+ if (!target_is_async_p ())
+ signal (SIGINT, ofunc);
+ }
+
+ buf = rs->buf;
+
+ remote_stopped_by_watchpoint_p = 0;
+
+ /* We got something. */
+ rs->waiting_for_stop_reply = 0;
+
+ switch (buf[0])
+ {
+ case 'E': /* Error of some sort. */
+ /* We're out of sync with the target now. Did it continue or
+ not? Not is more likely, so report a stop. */
+ warning (_("Remote failure reply: %s"), buf);
+ status->kind = TARGET_WAITKIND_STOPPED;
+ status->value.sig = TARGET_SIGNAL_0;
+ break;
+ case 'F': /* File-I/O request. */
+ remote_fileio_request (buf);
+ break;
+ case 'T': case 'S': case 'X': case 'W':
+ {
+ struct stop_reply *stop_reply;
+ struct cleanup *old_chain;
+
+ stop_reply = stop_reply_xmalloc ();
+ old_chain = make_cleanup (do_stop_reply_xfree, stop_reply);
+ remote_parse_stop_reply (buf, stop_reply);
+ discard_cleanups (old_chain);
+ event_ptid = process_stop_reply (stop_reply, status);
+ break;
+ }
+ case 'O': /* Console output. */
+ remote_console_output (buf + 1);
+
+ /* The target didn't really stop; keep waiting. */
+ rs->waiting_for_stop_reply = 1;
+
+ break;
+ case '\0':
+ if (last_sent_signal != TARGET_SIGNAL_0)
+ {
+ /* Zero length reply means that we tried 'S' or 'C' and the
+ remote system doesn't support it. */
+ target_terminal_ours_for_output ();
+ printf_filtered
+ ("Can't send signals to this remote system. %s not sent.\n",
+ target_signal_to_name (last_sent_signal));
+ last_sent_signal = TARGET_SIGNAL_0;
+ target_terminal_inferior ();
+
+ strcpy ((char *) buf, last_sent_step ? "s" : "c");
+ putpkt ((char *) buf);
+
+ /* We just told the target to resume, so a stop reply is in
+ order. */
+ rs->waiting_for_stop_reply = 1;
+ break;
+ }
+ /* else fallthrough */
+ default:
+ warning (_("Invalid remote reply: %s"), buf);
+ /* Keep waiting. */
+ rs->waiting_for_stop_reply = 1;
+ break;
}
-got_status:
- if (status->kind == TARGET_WAITKIND_EXITED
- || status->kind == TARGET_WAITKIND_SIGNALLED)
+
+ if (status->kind == TARGET_WAITKIND_IGNORE)
{
- int pid = ptid_get_pid (event_ptid);
- delete_inferior (pid);
+ /* Nothing interesting happened. If we're doing a non-blocking
+ poll, we're done. Otherwise, go back to waiting. */
+ if (options & TARGET_WNOHANG)
+ return minus_one_ptid;
+ else
+ goto again;
}
- else
+ else if (status->kind != TARGET_WAITKIND_EXITED
+ && status->kind != TARGET_WAITKIND_SIGNALLED)
{
if (!ptid_equal (event_ptid, null_ptid))
record_currthread (event_ptid);
else
event_ptid = inferior_ptid;
}
+ else
+ /* A process exit. Invalidate our notion of current thread. */
+ record_currthread (minus_one_ptid);
+
+ return event_ptid;
+}
+
+/* Wait until the remote machine stops, then return, storing status in
+ STATUS just as `wait' would. */
+
+static ptid_t
+remote_wait (struct target_ops *ops,
+ ptid_t ptid, struct target_waitstatus *status, int options)
+{
+ ptid_t event_ptid;
+
+ if (non_stop)
+ event_ptid = remote_wait_ns (ptid, status, options);
+ else
+ event_ptid = remote_wait_as (ptid, status, options);
+
+ if (target_can_async_p ())
+ {
+ /* If there are are events left in the queue tell the event loop
+ to return here. */
+ if (stop_reply_queue)
+ mark_async_event_handler (remote_async_inferior_event_token);
+ }
return event_ptid;
}
*p++ = 'p';
p += hexnumstr (p, reg->pnum);
*p++ = '\0';
- remote_send (&rs->buf, &rs->buf_size);
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
buf = rs->buf;
case PACKET_UNKNOWN:
return 0;
case PACKET_ERROR:
- error (_("Could not fetch register \"%s\""),
- gdbarch_register_name (get_regcache_arch (regcache), reg->regnum));
+ error (_("Could not fetch register \"%s\"; remote failure reply '%s'"),
+ gdbarch_register_name (get_regcache_arch (regcache),
+ reg->regnum),
+ buf);
}
/* If this register is unfetchable, tell the regcache. */
send_g_packet (void)
{
struct remote_state *rs = get_remote_state ();
- int i, buf_len;
- char *p;
- char *regs;
+ int buf_len;
sprintf (rs->buf, "g");
remote_send (&rs->buf, &rs->buf_size);
}
static void
-remote_fetch_registers (struct regcache *regcache, int regnum)
+remote_fetch_registers (struct target_ops *ops,
+ struct regcache *regcache, int regnum)
{
- struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
packet was not recognized. */
static int
-store_register_using_P (const struct regcache *regcache, struct packet_reg *reg)
+store_register_using_P (const struct regcache *regcache,
+ struct packet_reg *reg)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct remote_state *rs = get_remote_state ();
- struct remote_arch_state *rsa = get_remote_arch_state ();
/* Try storing a single register. */
char *buf = rs->buf;
gdb_byte regp[MAX_REGISTER_SIZE];
p = buf + strlen (buf);
regcache_raw_collect (regcache, reg->regnum, regp);
bin2hex (regp, p, register_size (gdbarch, reg->regnum));
- remote_send (&rs->buf, &rs->buf_size);
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_P]))
{
case PACKET_OK:
return 1;
case PACKET_ERROR:
- error (_("Could not write register \"%s\""),
- gdbarch_register_name (gdbarch, reg->regnum));
+ error (_("Could not write register \"%s\"; remote failure reply '%s'"),
+ gdbarch_register_name (gdbarch, reg->regnum), rs->buf);
case PACKET_UNKNOWN:
return 0;
default:
/* remote_prepare_to_store insures that rsa->sizeof_g_packet gets
updated. */
bin2hex (regs, p, rsa->sizeof_g_packet);
- remote_send (&rs->buf, &rs->buf_size);
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (packet_check_result (rs->buf) == PACKET_ERROR)
+ error (_("Could not write registers; remote failure reply '%s'"),
+ rs->buf);
}
/* Store register REGNUM, or all registers if REGNUM == -1, from the contents
of the register cache buffer. FIXME: ignores errors. */
static void
-remote_store_registers (struct regcache *regcache, int regnum)
+remote_store_registers (struct target_ops *ops,
+ struct regcache *regcache, int regnum)
{
- struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
}
return origlen;
}
+\f
+
+/* Remote notification handler. */
+
+static void
+handle_notification (char *buf, size_t length)
+{
+ if (strncmp (buf, "Stop:", 5) == 0)
+ {
+ if (pending_stop_reply)
+ /* We've already parsed the in-flight stop-reply, but the stub
+ for some reason thought we didn't, possibly due to timeout
+ on its side. Just ignore it. */
+ ;
+ else
+ {
+ struct cleanup *old_chain;
+ struct stop_reply *reply = stop_reply_xmalloc ();
+ old_chain = make_cleanup (do_stop_reply_xfree, reply);
+
+ remote_parse_stop_reply (buf + 5, reply);
+
+ discard_cleanups (old_chain);
+
+ /* Be careful to only set it after parsing, since an error
+ may be thrown then. */
+ pending_stop_reply = reply;
+
+ /* Notify the event loop there's a stop reply to acknowledge
+ and that there may be more events to fetch. */
+ mark_async_event_handler (remote_async_get_pending_events_token);
+ }
+ }
+ else
+ /* We ignore notifications we don't recognize, for compatibility
+ with newer stubs. */
+ ;
+}
+
\f
/* Read or write LEN bytes from inferior memory at MEMADDR,
transferring to or from debugger address BUFFER. Write to inferior
FORMAT and the remaining arguments, then gets the reply. Returns
whether the packet was a success, a failure, or unknown. */
-enum packet_result
+static enum packet_result
remote_send_printf (const char *format, ...)
{
struct remote_state *rs = get_remote_state ();
remote_flash_erase (struct target_ops *ops,
ULONGEST address, LONGEST length)
{
+ int addr_size = gdbarch_addr_bit (target_gdbarch) / 8;
int saved_remote_timeout = remote_timeout;
enum packet_result ret;
remote_timeout = remote_flash_timeout;
ret = remote_send_printf ("vFlashErase:%s,%s",
- paddr (address),
+ phex (address, addr_size),
phex (length, 4));
switch (ret)
{
switch ((enum serial_rc) ch)
{
case SERIAL_EOF:
- target_mourn_inferior ();
+ pop_target ();
error (_("Remote connection closed"));
/* no return */
case SERIAL_ERROR:
error (_("Remote failure reply: %s"), *buf);
}
+/* Return a pointer to an xmalloc'ed string representing an escaped
+ version of BUF, of len N. E.g. \n is converted to \\n, \t to \\t,
+ etc. The caller is responsible for releasing the returned
+ memory. */
+
+static char *
+escape_buffer (const char *buf, int n)
+{
+ struct cleanup *old_chain;
+ struct ui_file *stb;
+ char *str;
+
+ stb = mem_fileopen ();
+ old_chain = make_cleanup_ui_file_delete (stb);
+
+ fputstrn_unfiltered (buf, n, 0, stb);
+ str = ui_file_xstrdup (stb, NULL);
+ do_cleanups (old_chain);
+ return str;
+}
+
/* Display a null-terminated packet on stdout, for debugging, using C
string notation. */
int tcount = 0;
char *p;
+ /* Catch cases like trying to read memory or listing threads while
+ we're waiting for a stop reply. The remote server wouldn't be
+ ready to handle this request, so we'd hang and timeout. We don't
+ have to worry about this in synchronous mode, because in that
+ case it's not possible to issue a command while the target is
+ running. This is not a problem in non-stop mode, because in that
+ case, the stub is always ready to process serial input. */
+ if (!non_stop && target_can_async_p () && rs->waiting_for_stop_reply)
+ error (_("Cannot execute this command while the target is running."));
+
/* We're sending out a new packet. Make sure we don't look at a
stale cached response. */
rs->cached_wait_status = 0;
if (remote_debug)
{
+ struct cleanup *old_chain;
+ char *str;
+
*p = '\0';
- fprintf_unfiltered (gdb_stdlog, "Sending packet: ");
- fputstrn_unfiltered (buf2, p - buf2, 0, gdb_stdlog);
- fprintf_unfiltered (gdb_stdlog, "...");
+ str = escape_buffer (buf2, p - buf2);
+ old_chain = make_cleanup (xfree, str);
+ fprintf_unfiltered (gdb_stdlog, "Sending packet: %s...", str);
gdb_flush (gdb_stdlog);
+ do_cleanups (old_chain);
}
if (serial_write (remote_desc, buf2, p - buf2))
perror_with_name (_("putpkt: write failed"));
if (rs->noack_mode)
break;
- /* Read until either a timeout occurs (-2) or '+' is read. */
+ /* Read until either a timeout occurs (-2) or '+' is read.
+ Handle any notification that arrives in the mean time. */
while (1)
{
ch = readchar (remote_timeout);
case '-':
case SERIAL_TIMEOUT:
case '$':
+ case '%':
if (started_error_output)
{
putchar_unfiltered ('\n');
serial_write (remote_desc, "+", 1);
continue; /* Now, go look for +. */
}
+
+ case '%':
+ {
+ int val;
+
+ /* If we got a notification, handle it, and go back to looking
+ for an ack. */
+ /* We've found the start of a notification. Now
+ collect the data. */
+ val = read_frame (&rs->buf, &rs->buf_size);
+ if (val >= 0)
+ {
+ if (remote_debug)
+ {
+ struct cleanup *old_chain;
+ char *str;
+
+ str = escape_buffer (rs->buf, val);
+ old_chain = make_cleanup (xfree, str);
+ fprintf_unfiltered (gdb_stdlog,
+ " Notification received: %s\n",
+ str);
+ do_cleanups (old_chain);
+ }
+ handle_notification (rs->buf, val);
+ /* We're in sync now, rewait for the ack. */
+ tcount = 0;
+ }
+ else
+ {
+ if (remote_debug)
+ {
+ if (!started_error_output)
+ {
+ started_error_output = 1;
+ fprintf_unfiltered (gdb_stdlog, "putpkt: Junk: ");
+ }
+ fputc_unfiltered (ch & 0177, gdb_stdlog);
+ fprintf_unfiltered (gdb_stdlog, "%s", rs->buf);
+ }
+ }
+ continue;
+ }
+ /* fall-through */
default:
if (remote_debug)
{
if (remote_debug)
{
- fprintf_filtered (gdb_stdlog,
- "Bad checksum, sentsum=0x%x, csum=0x%x, buf=",
- pktcsum, csum);
- fputstrn_filtered (buf, bc, 0, gdb_stdlog);
- fputs_filtered ("\n", gdb_stdlog);
+ struct cleanup *old_chain;
+ char *str;
+
+ str = escape_buffer (buf, bc);
+ old_chain = make_cleanup (xfree, str);
+ fprintf_unfiltered (gdb_stdlog,
+ "\
+Bad checksum, sentsum=0x%x, csum=0x%x, buf=%s\n",
+ pktcsum, csum, str);
+ do_cleanups (old_chain);
}
/* Number of characters in buffer ignoring trailing
NULL. */
rather than timing out; this is used (in synchronous mode) to wait
for a target that is is executing user code to stop. If FOREVER ==
0, this function is allowed to time out gracefully and return an
- indication of this to the caller. Otherwise return the number
- of bytes read. */
+ indication of this to the caller. Otherwise return the number of
+ bytes read. If EXPECTING_NOTIF, consider receiving a notification
+ enough reason to return to the caller. */
+
static int
-getpkt_sane (char **buf, long *sizeof_buf, int forever)
+getpkt_or_notif_sane_1 (char **buf, long *sizeof_buf, int forever,
+ int expecting_notif)
{
struct remote_state *rs = get_remote_state ();
int c;
int tries;
int timeout;
- int val;
+ int val = -1;
/* We're reading a new response. Make sure we don't look at a
previously cached response. */
strcpy (*buf, "timeout");
if (forever)
- {
- timeout = watchdog > 0 ? watchdog : -1;
- }
-
+ timeout = watchdog > 0 ? watchdog : -1;
+ else if (expecting_notif)
+ timeout = 0; /* There should already be a char in the buffer. If
+ not, bail out. */
else
timeout = remote_timeout;
#define MAX_TRIES 3
- for (tries = 1; tries <= MAX_TRIES; tries++)
+ /* Process any number of notifications, and then return when
+ we get a packet. */
+ for (;;)
{
- /* This can loop forever if the remote side sends us characters
- continuously, but if it pauses, we'll get a zero from
- readchar because of timeout. Then we'll count that as a
- retry. */
-
- /* Note that we will only wait forever prior to the start of a
- packet. After that, we expect characters to arrive at a
- brisk pace. They should show up within remote_timeout
- intervals. */
-
- do
+ /* If we get a timeout or bad checksm, retry up to MAX_TRIES
+ times. */
+ for (tries = 1; tries <= MAX_TRIES; tries++)
{
- c = readchar (timeout);
+ /* This can loop forever if the remote side sends us
+ characters continuously, but if it pauses, we'll get
+ SERIAL_TIMEOUT from readchar because of timeout. Then
+ we'll count that as a retry.
+
+ Note that even when forever is set, we will only wait
+ forever prior to the start of a packet. After that, we
+ expect characters to arrive at a brisk pace. They should
+ show up within remote_timeout intervals. */
+ do
+ c = readchar (timeout);
+ while (c != SERIAL_TIMEOUT && c != '$' && c != '%');
if (c == SERIAL_TIMEOUT)
{
+ if (expecting_notif)
+ return -1; /* Don't complain, it's normal to not get
+ anything in this case. */
+
if (forever) /* Watchdog went off? Kill the target. */
{
QUIT;
- target_mourn_inferior ();
+ pop_target ();
error (_("Watchdog timeout has expired. Target detached."));
}
if (remote_debug)
fputs_filtered ("Timed out.\n", gdb_stdlog);
- goto retry;
}
+ else
+ {
+ /* We've found the start of a packet or notification.
+ Now collect the data. */
+ val = read_frame (buf, sizeof_buf);
+ if (val >= 0)
+ break;
+ }
+
+ serial_write (remote_desc, "-", 1);
}
- while (c != '$');
- /* We've found the start of a packet, now collect the data. */
+ if (tries > MAX_TRIES)
+ {
+ /* We have tried hard enough, and just can't receive the
+ packet/notification. Give up. */
+ printf_unfiltered (_("Ignoring packet error, continuing...\n"));
- val = read_frame (buf, sizeof_buf);
+ /* Skip the ack char if we're in no-ack mode. */
+ if (!rs->noack_mode)
+ serial_write (remote_desc, "+", 1);
+ return -1;
+ }
- if (val >= 0)
+ /* If we got an ordinary packet, return that to our caller. */
+ if (c == '$')
{
if (remote_debug)
{
- fprintf_unfiltered (gdb_stdlog, "Packet received: ");
- fputstrn_unfiltered (*buf, val, 0, gdb_stdlog);
- fprintf_unfiltered (gdb_stdlog, "\n");
+ struct cleanup *old_chain;
+ char *str;
+
+ str = escape_buffer (*buf, val);
+ old_chain = make_cleanup (xfree, str);
+ fprintf_unfiltered (gdb_stdlog, "Packet received: %s\n", str);
+ do_cleanups (old_chain);
}
/* Skip the ack char if we're in no-ack mode. */
return val;
}
- /* Try the whole thing again. */
- retry:
- /* Skip the nack char if we're in no-ack mode. */
- if (!rs->noack_mode)
- serial_write (remote_desc, "-", 1);
- }
+ /* If we got a notification, handle it, and go back to looking
+ for a packet. */
+ else
+ {
+ gdb_assert (c == '%');
- /* We have tried hard enough, and just can't receive the packet.
- Give up. */
+ if (remote_debug)
+ {
+ struct cleanup *old_chain;
+ char *str;
+
+ str = escape_buffer (*buf, val);
+ old_chain = make_cleanup (xfree, str);
+ fprintf_unfiltered (gdb_stdlog,
+ " Notification received: %s\n",
+ str);
+ do_cleanups (old_chain);
+ }
- printf_unfiltered (_("Ignoring packet error, continuing...\n"));
+ handle_notification (*buf, val);
- /* Skip the ack char if we're in no-ack mode. */
- if (!rs->noack_mode)
- serial_write (remote_desc, "+", 1);
- return -1;
+ /* Notifications require no acknowledgement. */
+
+ if (expecting_notif)
+ return -1;
+ }
+ }
+}
+
+static int
+getpkt_sane (char **buf, long *sizeof_buf, int forever)
+{
+ return getpkt_or_notif_sane_1 (buf, sizeof_buf, forever, 0);
+}
+
+static int
+getpkt_or_notif_sane (char **buf, long *sizeof_buf, int forever)
+{
+ return getpkt_or_notif_sane_1 (buf, sizeof_buf, forever, 1);
}
+
\f
static void
-remote_kill (void)
+remote_kill (struct target_ops *ops)
{
- /* Unregister the file descriptor from the event loop. */
- if (target_is_async_p ())
- serial_async (remote_desc, NULL, 0);
-
/* Use catch_errors so the user can quit from gdb even when we
aren't on speaking terms with the remote system. */
catch_errors ((catch_errors_ftype *) putpkt, "k", "", RETURN_MASK_ERROR);
}
static void
-extended_remote_kill (void)
+extended_remote_kill (struct target_ops *ops)
{
int res;
int pid = ptid_get_pid (inferior_ptid);
if (res != 0)
error (_("Can't kill process"));
- delete_inferior (pid);
target_mourn_inferior ();
}
static void
-remote_mourn (void)
+remote_mourn (struct target_ops *ops)
{
- remote_mourn_1 (&remote_ops);
+ remote_mourn_1 (ops);
}
/* Worker function for remote_mourn. */
static void
remote_mourn_1 (struct target_ops *target)
{
- /* Get rid of all the inferiors and their threads we were
- controlling. */
- discard_all_inferiors ();
-
unpush_target (target);
- generic_mourn_inferior ();
-}
-static int
-select_new_thread_callback (struct thread_info *th, void* data)
-{
- if (!ptid_equal (th->ptid, minus_one_ptid))
- {
- switch_to_thread (th->ptid);
- printf_filtered (_("[Switching to %s]\n"),
- target_pid_to_str (inferior_ptid));
- return 1;
- }
- return 0;
+ /* remote_close takes care of doing most of the clean up. */
+ generic_mourn_inferior ();
}
static void
{
struct remote_state *rs = get_remote_state ();
+ /* In case we got here due to an error, but we're going to stay
+ connected. */
+ rs->waiting_for_stop_reply = 0;
+
+ /* We're no longer interested in these events. */
+ discard_pending_stop_replies (ptid_get_pid (inferior_ptid));
+
+ /* If the current general thread belonged to the process we just
+ detached from or has exited, the remote side current general
+ thread becomes undefined. Considering a case like this:
+
+ - We just got here due to a detach.
+ - The process that we're detaching from happens to immediately
+ report a global breakpoint being hit in non-stop mode, in the
+ same thread we had selected before.
+ - GDB attaches to this process again.
+ - This event happens to be the next event we handle.
+
+ GDB would consider that the current general thread didn't need to
+ be set on the stub side (with Hg), since for all it knew,
+ GENERAL_THREAD hadn't changed.
+
+ Notice that although in all-stop mode, the remote server always
+ sets the current thread to the thread reporting the stop event,
+ that doesn't happen in non-stop mode; in non-stop, the stub *must
+ not* change the current thread when reporting a breakpoint hit,
+ due to the decoupling of event reporting and event handling.
+
+ To keep things simple, we always invalidate our notion of the
+ current thread. */
+ record_currthread (minus_one_ptid);
+
/* Unlike "target remote", we do not want to unpush the target; then
the next time the user says "run", we won't be connected. */
- if (have_inferiors ())
- {
- extern void nullify_last_target_wait_ptid ();
- /* Multi-process case. The current process has exited, but
- there are other processes to debug. Switch to the first
- available. */
- iterate_over_threads (select_new_thread_callback, NULL);
- nullify_last_target_wait_ptid ();
- }
- else
- {
- struct remote_state *rs = get_remote_state ();
+ /* Call common code to mark the inferior as not running. */
+ generic_mourn_inferior ();
- /* Call common code to mark the inferior as not running. */
- generic_mourn_inferior ();
+ if (!have_inferiors ())
+ {
if (!remote_multi_process_p (rs))
{
/* Check whether the target is running now - some remote stubs
so that the user can say "kill" again. */
inferior_ptid = magic_null_ptid;
}
- else
- {
- /* Mark this (still pushed) target as not executable until we
- restart it. */
- target_mark_exited (target);
- }
}
- else
- /* Always remove execution if this was the last process. */
- target_mark_exited (target);
}
}
static void
-extended_remote_mourn (void)
+extended_remote_mourn (struct target_ops *ops)
{
- extended_remote_mourn_1 (&extended_remote_ops);
+ extended_remote_mourn_1 (ops);
}
static int
extended_remote_run (char *args)
{
struct remote_state *rs = get_remote_state ();
- char *p;
int len;
/* If the user has disabled vRun support, or we have detected that
error (_("Remote file name too long for run packet"));
len += 2 * bin2hex ((gdb_byte *) remote_exec_file, rs->buf + len, 0);
+ gdb_assert (args != NULL);
if (*args)
{
struct cleanup *back_to;
int i;
char **argv;
- argv = buildargv (args);
+ argv = gdb_buildargv (args);
back_to = make_cleanup ((void (*) (void *)) freeargv, argv);
for (i = 0; argv[i] != NULL; i++)
{
/* Now mark the inferior as running before we do anything else. */
inferior_ptid = magic_null_ptid;
- add_inferior (ptid_get_pid (inferior_ptid));
- add_thread_silent (inferior_ptid);
+ /* Now, if we have thread information, update inferior_ptid. */
+ inferior_ptid = remote_current_thread (inferior_ptid);
- target_mark_running (&extended_remote_ops);
+ remote_add_inferior (ptid_get_pid (inferior_ptid), 0);
+ add_thread_silent (inferior_ptid);
/* Get updated offsets, if the stub uses qOffsets. */
get_offsets ();
}
static void
-extended_remote_create_inferior (char *exec_file, char *args,
+extended_remote_create_inferior (struct target_ops *ops,
+ char *exec_file, char *args,
char **env, int from_tty)
{
extended_remote_create_inferior_1 (exec_file, args, env, from_tty);
which don't, we insert a traditional memory breakpoint. */
static int
-remote_insert_breakpoint (struct bp_target_info *bp_tgt)
+remote_insert_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
/* Try the "Z" s/w breakpoint packet if it is not already disabled.
If it succeeds, then set the support to PACKET_ENABLE. If it
char *p;
int bpsize;
- gdbarch_breakpoint_from_pc (target_gdbarch, &addr, &bpsize);
+ gdbarch_breakpoint_from_pc (gdbarch, &addr, &bpsize);
rs = get_remote_state ();
p = rs->buf;
}
}
- return memory_insert_breakpoint (bp_tgt);
+ return memory_insert_breakpoint (gdbarch, bp_tgt);
}
static int
-remote_remove_breakpoint (struct bp_target_info *bp_tgt)
+remote_remove_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
CORE_ADDR addr = bp_tgt->placed_address;
struct remote_state *rs = get_remote_state ();
- int bp_size;
if (remote_protocol_packets[PACKET_Z0].support != PACKET_DISABLE)
{
return (rs->buf[0] == 'E');
}
- return memory_remove_breakpoint (bp_tgt);
+ return memory_remove_breakpoint (gdbarch, bp_tgt);
}
static int
static int
-remote_insert_hw_breakpoint (struct bp_target_info *bp_tgt)
+remote_insert_hw_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
CORE_ADDR addr;
struct remote_state *rs;
instruction, even though we aren't inserting one ourselves. */
gdbarch_breakpoint_from_pc
- (target_gdbarch, &bp_tgt->placed_address, &bp_tgt->placed_size);
+ (gdbarch, &bp_tgt->placed_address, &bp_tgt->placed_size);
if (remote_protocol_packets[PACKET_Z1].support == PACKET_DISABLE)
return -1;
static int
-remote_remove_hw_breakpoint (struct bp_target_info *bp_tgt)
+remote_remove_hw_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
CORE_ADDR addr;
struct remote_state *rs = get_remote_state ();
_("remote_remove_hw_breakpoint: reached end of function"));
}
-/* Some targets are only capable of doing downloads, and afterwards
- they switch to the remote serial protocol. This function provides
- a clean way to get from the download target to the remote target.
- It's basically just a wrapper so that we don't have to expose any
- of the internal workings of remote.c.
-
- Prior to calling this routine, you should shutdown the current
- target code, else you will get the "A program is being debugged
- already..." message. Usually a call to pop_target() suffices. */
-
-void
-push_remote_target (char *name, int from_tty)
-{
- printf_filtered (_("Switching to remote protocol\n"));
- remote_open (name, from_tty);
-}
-
/* Table used by the crc32 function to calcuate the checksum. */
static unsigned long crc32_table[256] =
struct remote_state *rs = get_remote_state ();
asection *s;
unsigned long host_crc, target_crc;
- extern bfd *exec_bfd;
struct cleanup *old_chain;
char *tmp;
char *sectdata;
getpkt (&rs->buf, &rs->buf_size, 0);
if (rs->buf[0] == 'E')
- error (_("target memory fault, section %s, range 0x%s -- 0x%s"),
- sectname, paddr (lma), paddr (lma + size));
+ error (_("target memory fault, section %s, range %s -- %s"), sectname,
+ paddress (target_gdbarch, lma),
+ paddress (target_gdbarch, lma + size));
if (rs->buf[0] != 'C')
error (_("remote target does not support this operation"));
for (target_crc = 0, tmp = &rs->buf[1]; *tmp; tmp++)
target_crc = target_crc * 16 + fromhex (*tmp);
- printf_filtered ("Section %s, range 0x%s -- 0x%s: ",
- sectname, paddr (lma), paddr (lma + size));
+ printf_filtered ("Section %s, range %s -- %s: ", sectname,
+ paddress (target_gdbarch, lma),
+ paddress (target_gdbarch, lma + size));
if (host_crc == target_crc)
printf_filtered ("matched.\n");
else
{
int i, buf_len;
ULONGEST n;
- gdb_byte *wbuf;
struct remote_state *rs = get_remote_state ();
int max_size = get_memory_write_packet_size ();
static ULONGEST finished_offset;
struct remote_state *rs = get_remote_state ();
- unsigned int total = 0;
LONGEST i, n, packet_len;
if (packet->support == PACKET_DISABLE)
[PACKET_qXfer_spu_write]);
}
+ /* Handle extra signal info using qxfer packets. */
+ if (object == TARGET_OBJECT_SIGNAL_INFO)
+ {
+ if (readbuf)
+ return remote_read_qxfer (ops, "siginfo", annex, readbuf, offset, len,
+ &remote_protocol_packets
+ [PACKET_qXfer_siginfo_read]);
+ else
+ return remote_write_qxfer (ops, "siginfo", annex, writebuf, offset, len,
+ &remote_protocol_packets
+ [PACKET_qXfer_siginfo_write]);
+ }
+
/* Only handle flash writes. */
if (writebuf != NULL)
{
return remote_read_qxfer (ops, "memory-map", annex, readbuf, offset, len,
&remote_protocol_packets[PACKET_qXfer_memory_map]);
+ case TARGET_OBJECT_OSDATA:
+ /* Should only get here if we're connected. */
+ gdb_assert (remote_desc);
+ return remote_read_qxfer
+ (ops, "osdata", annex, readbuf, offset, len,
+ &remote_protocol_packets[PACKET_qXfer_osdata]);
+
default:
return -1;
}
const gdb_byte *pattern, ULONGEST pattern_len,
CORE_ADDR *found_addrp)
{
+ int addr_size = gdbarch_addr_bit (target_gdbarch) / 8;
struct remote_state *rs = get_remote_state ();
int max_size = get_memory_write_packet_size ();
struct packet_config *packet =
/* Insert header. */
i = snprintf (rs->buf, max_size,
"qSearch:memory:%s;%s;",
- paddr_nz (start_addr),
+ phex_nz (start_addr, addr_size),
phex_nz (search_space_len, sizeof (search_space_len)));
max_size -= (i + 1);
buffer. */
static char *
-remote_pid_to_str (ptid_t ptid)
+remote_pid_to_str (struct target_ops *ops, ptid_t ptid)
{
static char buf[64];
struct remote_state *rs = get_remote_state ();
- if (ptid_equal (magic_null_ptid, ptid))
- {
- xsnprintf (buf, sizeof buf, "Thread <main>");
- return buf;
- }
- else if (remote_multi_process_p (rs)
- && ptid_get_tid (ptid) != 0 && ptid_get_pid (ptid) != 0)
+ if (ptid_is_pid (ptid))
{
- xsnprintf (buf, sizeof buf, "Thread %d.%ld",
- ptid_get_pid (ptid), ptid_get_tid (ptid));
- return buf;
+ /* Printing an inferior target id. */
+
+ /* When multi-process extensions are off, there's no way in the
+ remote protocol to know the remote process id, if there's any
+ at all. There's one exception --- when we're connected with
+ target extended-remote, and we manually attached to a process
+ with "attach PID". We don't record anywhere a flag that
+ allows us to distinguish that case from the case of
+ connecting with extended-remote and the stub already being
+ attached to a process, and reporting yes to qAttached, hence
+ no smart special casing here. */
+ if (!remote_multi_process_p (rs))
+ {
+ xsnprintf (buf, sizeof buf, "Remote target");
+ return buf;
+ }
+
+ return normal_pid_to_str (ptid);
}
- else if (ptid_get_tid (ptid) != 0)
+ else
{
- xsnprintf (buf, sizeof buf, "Thread %ld",
- ptid_get_tid (ptid));
+ if (ptid_equal (magic_null_ptid, ptid))
+ xsnprintf (buf, sizeof buf, "Thread <main>");
+ else if (remote_multi_process_p (rs))
+ xsnprintf (buf, sizeof buf, "Thread %d.%ld",
+ ptid_get_pid (ptid), ptid_get_tid (ptid));
+ else
+ xsnprintf (buf, sizeof buf, "Thread %ld",
+ ptid_get_tid (ptid));
return buf;
}
-
- return normal_pid_to_str (ptid);
}
/* Get the address of the thread local variable in OBJFILE which is
stored at OFFSET within the thread local storage for thread PTID. */
static CORE_ADDR
-remote_get_thread_local_address (ptid_t ptid, CORE_ADDR lm, CORE_ADDR offset)
+remote_get_thread_local_address (struct target_ops *ops,
+ ptid_t ptid, CORE_ADDR lm, CORE_ADDR offset)
{
if (remote_protocol_packets[PACKET_qGetTLSAddr].support != PACKET_DISABLE)
{
VEC_safe_push (remote_g_packet_guess_s, data->guesses, &new_guess);
}
+/* Return 1 if remote_read_description would do anything on this target
+ and architecture, 0 otherwise. */
+
+static int
+remote_read_description_p (struct target_ops *target)
+{
+ struct remote_g_packet_data *data
+ = gdbarch_data (target_gdbarch, remote_g_packet_data_handle);
+
+ if (!VEC_empty (remote_g_packet_guess_s, data->guesses))
+ return 1;
+
+ return 0;
+}
+
static const struct target_desc *
remote_read_description (struct target_ops *target)
{
struct remote_g_packet_data *data
= gdbarch_data (target_gdbarch, remote_g_packet_data_handle);
+ /* Do not try this during initial connection, when we do not know
+ whether there is a running but stopped thread. */
+ if (!target_has_execution || ptid_equal (inferior_ptid, null_ptid))
+ return NULL;
+
if (!VEC_empty (remote_g_packet_guess_s, data->guesses))
{
struct remote_g_packet_guess *guess;
error (_("Remote I/O error: %s"), safe_strerror (host_error));
}
-static void
-fclose_cleanup (void *file)
-{
- fclose (file);
-}
-
static void
remote_hostio_close_cleanup (void *opaque)
{
file = fopen (local_file, "rb");
if (file == NULL)
perror_with_name (local_file);
- back_to = make_cleanup (fclose_cleanup, file);
+ back_to = make_cleanup_fclose (file);
fd = remote_hostio_open (remote_file, (FILEIO_O_WRONLY | FILEIO_O_CREAT
| FILEIO_O_TRUNC),
remote_file_get (const char *remote_file, const char *local_file, int from_tty)
{
struct cleanup *back_to, *close_cleanup;
- int retcode, fd, remote_errno, bytes, io_size;
+ int fd, remote_errno, bytes, io_size;
FILE *file;
gdb_byte *buffer;
ULONGEST offset;
file = fopen (local_file, "wb");
if (file == NULL)
perror_with_name (local_file);
- back_to = make_cleanup (fclose_cleanup, file);
+ back_to = make_cleanup_fclose (file);
/* Send up to this many bytes at once. They won't all fit in the
remote packet limit, so we'll transfer slightly fewer. */
struct cleanup *back_to;
char **argv;
- argv = buildargv (args);
- if (argv == NULL)
- nomem (0);
+ if (args == NULL)
+ error_no_arg (_("file to put"));
+
+ argv = gdb_buildargv (args);
back_to = make_cleanup_freeargv (argv);
if (argv[0] == NULL || argv[1] == NULL || argv[2] != NULL)
error (_("Invalid parameters to remote put"));
struct cleanup *back_to;
char **argv;
- argv = buildargv (args);
- if (argv == NULL)
- nomem (0);
+ if (args == NULL)
+ error_no_arg (_("file to get"));
+
+ argv = gdb_buildargv (args);
back_to = make_cleanup_freeargv (argv);
if (argv[0] == NULL || argv[1] == NULL || argv[2] != NULL)
error (_("Invalid parameters to remote get"));
struct cleanup *back_to;
char **argv;
- argv = buildargv (args);
- if (argv == NULL)
- nomem (0);
+ if (args == NULL)
+ error_no_arg (_("file to delete"));
+
+ argv = gdb_buildargv (args);
back_to = make_cleanup_freeargv (argv);
if (argv[0] == NULL || argv[1] != NULL)
error (_("Invalid parameters to remote delete"));
help_list (remote_cmdlist, "remote ", -1, gdb_stdout);
}
+static int
+remote_can_execute_reverse (void)
+{
+ if (remote_protocol_packets[PACKET_bs].support == PACKET_ENABLE
+ || remote_protocol_packets[PACKET_bc].support == PACKET_ENABLE)
+ return 1;
+ else
+ return 0;
+}
+
+static int
+remote_supports_non_stop (void)
+{
+ return 1;
+}
+
+static int
+remote_supports_multi_process (void)
+{
+ struct remote_state *rs = get_remote_state ();
+ return remote_multi_process_p (rs);
+}
+
+int
+remote_supports_cond_tracepoints (void)
+{
+ struct remote_state *rs = get_remote_state ();
+ return rs->cond_tracepoints;
+}
+
static void
init_remote_ops (void)
{
remote_ops.to_log_command = serial_log_command;
remote_ops.to_get_thread_local_address = remote_get_thread_local_address;
remote_ops.to_stratum = process_stratum;
- remote_ops.to_has_all_memory = 1;
- remote_ops.to_has_memory = 1;
- remote_ops.to_has_stack = 1;
- remote_ops.to_has_registers = 1;
- remote_ops.to_has_execution = 1;
+ remote_ops.to_has_all_memory = default_child_has_all_memory;
+ remote_ops.to_has_memory = default_child_has_memory;
+ remote_ops.to_has_stack = default_child_has_stack;
+ remote_ops.to_has_registers = default_child_has_registers;
+ remote_ops.to_has_execution = default_child_has_execution;
remote_ops.to_has_thread_control = tc_schedlock; /* can lock scheduler */
+ remote_ops.to_can_execute_reverse = remote_can_execute_reverse;
remote_ops.to_magic = OPS_MAGIC;
remote_ops.to_memory_map = remote_memory_map;
remote_ops.to_flash_erase = remote_flash_erase;
remote_ops.to_async_mask = remote_async_mask;
remote_ops.to_terminal_inferior = remote_terminal_inferior;
remote_ops.to_terminal_ours = remote_terminal_ours;
+ remote_ops.to_supports_non_stop = remote_supports_non_stop;
+ remote_ops.to_supports_multi_process = remote_supports_multi_process;
}
/* Set up the extended remote vector by making a copy of the standard
async_client_callback (INF_REG_EVENT, async_client_context);
}
+static void
+remote_async_inferior_event_handler (gdb_client_data data)
+{
+ inferior_event_handler (INF_REG_EVENT, NULL);
+}
+
+static void
+remote_async_get_pending_events_handler (gdb_client_data data)
+{
+ remote_get_pending_stop_replies ();
+}
+
static void
remote_async (void (*callback) (enum inferior_event_type event_type,
void *context), void *context)
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_spu_write],
"qXfer:spu:write", "write-spu-object", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_osdata],
+ "qXfer:osdata:read", "osdata", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_siginfo_read],
+ "qXfer:siginfo:read", "read-siginfo-object", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_siginfo_write],
+ "qXfer:siginfo:write", "write-siginfo-object", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qGetTLSAddr],
"qGetTLSAddr", "get-thread-local-storage-address",
0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_bc],
+ "bc", "reverse-continue", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_bs],
+ "bs", "reverse-step", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qSupported],
"qSupported", "supported-packets", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_vKill],
"vKill", "kill", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qAttached],
+ "qAttached", "query-attached", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_ConditionalTracepoints],
+ "ConditionalTracepoints", "conditional-tracepoints", 0);
+
/* Keep the old ``set remote Z-packet ...'' working. Each individual
Z sub-packet has its own set and show commands, but users may
have sets to this variable in their .gdbinit files (or in their
projects / deliverable / binutils-gdb.git / blobdiff