/* Target-dependent code for the Renesas RL78 for GDB, the GNU debugger.
- Copyright (C) 2011-2015 Free Software Foundation, Inc.
+ Copyright (C) 2011-2018 Free Software Foundation, Inc.
Contributed by Red Hat, Inc.
RL78_NUM_PSEUDO_REGS = RL78_NUM_TOTAL_REGS - RL78_NUM_REGS
};
+#define RL78_SP_ADDR 0xffff8
+
/* Architecture specific data. */
struct gdbarch_tdep
*rl78_uint32,
*rl78_int32,
*rl78_data_pointer,
- *rl78_code_pointer;
+ *rl78_code_pointer,
+ *rl78_psw_type;
};
/* This structure holds the results of a prologue analysis. */
int reg_offset[RL78_NUM_TOTAL_REGS];
};
+/* Construct type for PSW register. */
+
+static struct type *
+rl78_psw_type (struct gdbarch *gdbarch)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ if (tdep->rl78_psw_type == NULL)
+ {
+ tdep->rl78_psw_type = arch_flags_type (gdbarch,
+ "builtin_type_rl78_psw", 8);
+ append_flags_type_flag (tdep->rl78_psw_type, 0, "CY");
+ append_flags_type_flag (tdep->rl78_psw_type, 1, "ISP0");
+ append_flags_type_flag (tdep->rl78_psw_type, 2, "ISP1");
+ append_flags_type_flag (tdep->rl78_psw_type, 3, "RBS0");
+ append_flags_type_flag (tdep->rl78_psw_type, 4, "AC");
+ append_flags_type_flag (tdep->rl78_psw_type, 5, "RBS1");
+ append_flags_type_flag (tdep->rl78_psw_type, 6, "Z");
+ append_flags_type_flag (tdep->rl78_psw_type, 7, "IE");
+ }
+
+ return tdep->rl78_psw_type;
+}
+
/* Implement the "register_type" gdbarch method. */
static struct type *
return tdep->rl78_code_pointer;
else if (reg_nr == RL78_RAW_PC_REGNUM)
return tdep->rl78_uint32;
+ else if (reg_nr == RL78_PSW_REGNUM)
+ return rl78_psw_type (gdbarch);
else if (reg_nr <= RL78_MEM_REGNUM
|| (RL78_X_REGNUM <= reg_nr && reg_nr <= RL78_H_REGNUM)
|| (RL78_BANK0_R0_REGNUM <= reg_nr
static enum register_status
rl78_pseudo_register_read (struct gdbarch *gdbarch,
- struct regcache *regcache,
+ readable_regcache *regcache,
int reg, gdb_byte *buffer)
{
enum register_status status;
int raw_regnum = RL78_RAW_BANK0_R0_REGNUM
+ (reg - RL78_BANK0_R0_REGNUM);
- status = regcache_raw_read (regcache, raw_regnum, buffer);
+ status = regcache->raw_read (raw_regnum, buffer);
}
else if (RL78_BANK0_RP0_REGNUM <= reg && reg <= RL78_BANK3_RP3_REGNUM)
{
int raw_regnum = 2 * (reg - RL78_BANK0_RP0_REGNUM)
+ RL78_RAW_BANK0_R0_REGNUM;
- status = regcache_raw_read (regcache, raw_regnum, buffer);
+ status = regcache->raw_read (raw_regnum, buffer);
if (status == REG_VALID)
- status = regcache_raw_read (regcache, raw_regnum + 1, buffer + 1);
+ status = regcache->raw_read (raw_regnum + 1, buffer + 1);
}
else if (RL78_BANK0_RP0_PTR_REGNUM <= reg && reg <= RL78_BANK3_RP3_PTR_REGNUM)
{
int raw_regnum = 2 * (reg - RL78_BANK0_RP0_PTR_REGNUM)
+ RL78_RAW_BANK0_R0_REGNUM;
- status = regcache_raw_read (regcache, raw_regnum, buffer);
+ status = regcache->raw_read (raw_regnum, buffer);
if (status == REG_VALID)
- status = regcache_raw_read (regcache, raw_regnum + 1, buffer + 1);
+ status = regcache->raw_read (raw_regnum + 1, buffer + 1);
}
else if (reg == RL78_SP_REGNUM)
{
- status = regcache_raw_read (regcache, RL78_SPL_REGNUM, buffer);
+ status = regcache->raw_read (RL78_SPL_REGNUM, buffer);
if (status == REG_VALID)
- status = regcache_raw_read (regcache, RL78_SPH_REGNUM, buffer + 1);
+ status = regcache->raw_read (RL78_SPH_REGNUM, buffer + 1);
}
else if (reg == RL78_PC_REGNUM)
{
gdb_byte rawbuf[4];
- status = regcache_raw_read (regcache, RL78_RAW_PC_REGNUM, rawbuf);
+ status = regcache->raw_read (RL78_RAW_PC_REGNUM, rawbuf);
memcpy (buffer, rawbuf, 3);
}
else if (RL78_X_REGNUM <= reg && reg <= RL78_H_REGNUM)
{
ULONGEST psw;
- status = regcache_raw_read_unsigned (regcache, RL78_PSW_REGNUM, &psw);
+ status = regcache->raw_read (RL78_PSW_REGNUM, &psw);
if (status == REG_VALID)
{
/* RSB0 is at bit 3; RSBS1 is at bit 5. */
int bank = ((psw >> 3) & 1) | ((psw >> 4) & 1);
int raw_regnum = RL78_RAW_BANK0_R0_REGNUM + bank * RL78_REGS_PER_BANK
+ (reg - RL78_X_REGNUM);
- status = regcache_raw_read (regcache, raw_regnum, buffer);
+ status = regcache->raw_read (raw_regnum, buffer);
}
}
else if (RL78_AX_REGNUM <= reg && reg <= RL78_HL_REGNUM)
{
ULONGEST psw;
- status = regcache_raw_read_unsigned (regcache, RL78_PSW_REGNUM, &psw);
+ status = regcache->raw_read (RL78_PSW_REGNUM, &psw);
if (status == REG_VALID)
{
/* RSB0 is at bit 3; RSBS1 is at bit 5. */
int bank = ((psw >> 3) & 1) | ((psw >> 4) & 1);
int raw_regnum = RL78_RAW_BANK0_R0_REGNUM + bank * RL78_REGS_PER_BANK
+ 2 * (reg - RL78_AX_REGNUM);
- status = regcache_raw_read (regcache, raw_regnum, buffer);
+ status = regcache->raw_read (raw_regnum, buffer);
if (status == REG_VALID)
- status = regcache_raw_read (regcache, raw_regnum + 1,
- buffer + 1);
+ status = regcache->raw_read (raw_regnum + 1, buffer + 1);
}
}
else
gdb_assert_not_reached ("invalid pseudo register number");
}
-/* Implement the "breakpoint_from_pc" gdbarch method. */
+/* The documented BRK instruction is actually a two byte sequence,
+ {0x61, 0xcc}, but instructions may be as short as one byte.
+ Correspondence with Renesas revealed that the one byte sequence
+ 0xff is used when a one byte breakpoint instruction is required. */
+constexpr gdb_byte rl78_break_insn[] = { 0xff };
-static const gdb_byte *
-rl78_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr,
- int *lenptr)
-{
- /* The documented BRK instruction is actually a two byte sequence,
- {0x61, 0xcc}, but instructions may be as short as one byte.
- Correspondence with Renesas revealed that the one byte sequence
- 0xff is used when a one byte breakpoint instruction is required. */
- static gdb_byte breakpoint[] = { 0xff };
-
- *lenptr = sizeof breakpoint;
- return breakpoint;
-}
+typedef BP_MANIPULATION (rl78_break_insn) rl78_breakpoint;
/* Define a "handle" struct for fetching the next opcode. */
CORE_ADDR pc;
};
+static int
+opc_reg_to_gdb_regnum (int opcreg)
+{
+ switch (opcreg)
+ {
+ case RL78_Reg_X:
+ return RL78_X_REGNUM;
+ case RL78_Reg_A:
+ return RL78_A_REGNUM;
+ case RL78_Reg_C:
+ return RL78_C_REGNUM;
+ case RL78_Reg_B:
+ return RL78_B_REGNUM;
+ case RL78_Reg_E:
+ return RL78_E_REGNUM;
+ case RL78_Reg_D:
+ return RL78_D_REGNUM;
+ case RL78_Reg_L:
+ return RL78_L_REGNUM;
+ case RL78_Reg_H:
+ return RL78_H_REGNUM;
+ case RL78_Reg_AX:
+ return RL78_AX_REGNUM;
+ case RL78_Reg_BC:
+ return RL78_BC_REGNUM;
+ case RL78_Reg_DE:
+ return RL78_DE_REGNUM;
+ case RL78_Reg_HL:
+ return RL78_HL_REGNUM;
+ case RL78_Reg_SP:
+ return RL78_SP_REGNUM;
+ case RL78_Reg_PSW:
+ return RL78_PSW_REGNUM;
+ case RL78_Reg_CS:
+ return RL78_CS_REGNUM;
+ case RL78_Reg_ES:
+ return RL78_ES_REGNUM;
+ case RL78_Reg_PMC:
+ return RL78_PMC_REGNUM;
+ case RL78_Reg_MEM:
+ return RL78_MEM_REGNUM;
+ default:
+ internal_error (__FILE__, __LINE__,
+ _("Undefined mapping for opc reg %d"),
+ opcreg);
+ }
+
+ /* Not reached. */
+ return 0;
+}
+
/* Fetch a byte on behalf of the opcode decoder. HANDLE contains
the memory address of the next byte to fetch. If successful,
the address in the handle is updated and the byte fetched is
static int
rl78_get_opcode_byte (void *handle)
{
- struct rl78_get_opcode_byte_handle *opcdata = handle;
+ struct rl78_get_opcode_byte_handle *opcdata
+ = (struct rl78_get_opcode_byte_handle *) handle;
int status;
gdb_byte byte;
}
/* Function for finding saved registers in a 'struct pv_area'; this
- function is passed to pv_area_scan.
+ function is passed to pv_area::scan.
If VALUE is a saved register, ADDR says it was saved at a constant
offset from the frame base, and SIZE indicates that the whole
CORE_ADDR pc, next_pc;
int rn;
pv_t reg[RL78_NUM_TOTAL_REGS];
- struct pv_area *stack;
- struct cleanup *back_to;
CORE_ADDR after_last_frame_setup_insn = start_pc;
int bank = 0;
result->reg_offset[rn] = 1;
}
- stack = make_pv_area (RL78_SP_REGNUM, gdbarch_addr_bit (target_gdbarch ()));
- back_to = make_cleanup_free_pv_area (stack);
+ pv_area stack (RL78_SP_REGNUM, gdbarch_addr_bit (target_gdbarch ()));
/* The call instruction has saved the return address on the stack. */
reg[RL78_SP_REGNUM] = pv_add_constant (reg[RL78_SP_REGNUM], -4);
- pv_area_store (stack, reg[RL78_SP_REGNUM], 4, reg[RL78_PC_REGNUM]);
+ stack.store (reg[RL78_SP_REGNUM], 4, reg[RL78_PC_REGNUM]);
pc = start_pc;
while (pc < limit_pc)
opcode_handle.pc = pc;
bytes_read = rl78_decode_opcode (pc, &opc, rl78_get_opcode_byte,
- &opcode_handle);
+ &opcode_handle, RL78_ISA_DEFAULT);
next_pc = pc + bytes_read;
if (opc.id == RLO_sel)
&& opc.op[1].type == RL78_Operand_Register)
{
int rsrc = (bank * RL78_REGS_PER_BANK)
- + 2 * (opc.op[1].reg - RL78_Reg_AX);
+ + 2 * (opc.op[1].reg - RL78_Reg_AX);
reg[RL78_SP_REGNUM] = pv_add_constant (reg[RL78_SP_REGNUM], -1);
- pv_area_store (stack, reg[RL78_SP_REGNUM], 1, reg[rsrc]);
+ stack.store (reg[RL78_SP_REGNUM], 1, reg[rsrc]);
reg[RL78_SP_REGNUM] = pv_add_constant (reg[RL78_SP_REGNUM], -1);
- pv_area_store (stack, reg[RL78_SP_REGNUM], 1, reg[rsrc + 1]);
+ stack.store (reg[RL78_SP_REGNUM], 1, reg[rsrc + 1]);
after_last_frame_setup_insn = next_pc;
}
else if (opc.id == RLO_sub
-addend);
after_last_frame_setup_insn = next_pc;
}
+ else if (opc.id == RLO_mov
+ && opc.size == RL78_Word
+ && opc.op[0].type == RL78_Operand_Register
+ && opc.op[1].type == RL78_Operand_Indirect
+ && opc.op[1].addend == RL78_SP_ADDR)
+ {
+ reg[opc_reg_to_gdb_regnum (opc.op[0].reg)]
+ = reg[RL78_SP_REGNUM];
+ }
+ else if (opc.id == RLO_sub
+ && opc.size == RL78_Word
+ && opc.op[0].type == RL78_Operand_Register
+ && opc.op[1].type == RL78_Operand_Immediate)
+ {
+ int addend = opc.op[1].addend;
+ int regnum = opc_reg_to_gdb_regnum (opc.op[0].reg);
+
+ reg[regnum] = pv_add_constant (reg[regnum], -addend);
+ }
+ else if (opc.id == RLO_mov
+ && opc.size == RL78_Word
+ && opc.op[0].type == RL78_Operand_Indirect
+ && opc.op[0].addend == RL78_SP_ADDR
+ && opc.op[1].type == RL78_Operand_Register)
+ {
+ reg[RL78_SP_REGNUM]
+ = reg[opc_reg_to_gdb_regnum (opc.op[1].reg)];
+ after_last_frame_setup_insn = next_pc;
+ }
else
{
/* Terminate the prologue scan. */
result->frame_size = reg[RL78_SP_REGNUM].k;
/* Record where all the registers were saved. */
- pv_area_scan (stack, check_for_saved, (void *) result);
+ stack.scan (check_for_saved, (void *) result);
result->prologue_end = after_last_frame_setup_insn;
-
- do_cleanups (back_to);
}
/* Implement the "addr_bits_remove" gdbarch method. */
if (!func_start)
stop_addr = func_start;
- rl78_analyze_prologue (func_start, stop_addr, *this_prologue_cache);
+ rl78_analyze_prologue (func_start, stop_addr,
+ (struct rl78_prologue *) *this_prologue_cache);
}
- return *this_prologue_cache;
+ return (struct rl78_prologue *) *this_prologue_cache;
}
/* Given a frame and a prologue cache, return this frame's base. */
else if (reg == 37)
return RL78_PC_REGNUM;
else
- internal_error (__FILE__, __LINE__,
- _("Undefined dwarf2 register mapping of reg %d"),
- reg);
+ return -1;
}
/* Implement the `register_sim_regno' gdbarch method. */
/* None found, create a new architecture from the information
provided. */
- tdep = (struct gdbarch_tdep *) xmalloc (sizeof (struct gdbarch_tdep));
+ tdep = XCNEW (struct gdbarch_tdep);
gdbarch = gdbarch_alloc (&info, tdep);
tdep->elf_flags = elf_flags;
/* Initialize types. */
- tdep->rl78_void = arch_type (gdbarch, TYPE_CODE_VOID, 1, "void");
+ tdep->rl78_void = arch_type (gdbarch, TYPE_CODE_VOID, TARGET_CHAR_BIT,
+ "void");
tdep->rl78_uint8 = arch_integer_type (gdbarch, 8, 1, "uint8_t");
tdep->rl78_int8 = arch_integer_type (gdbarch, 8, 0, "int8_t");
tdep->rl78_uint16 = arch_integer_type (gdbarch, 16, 1, "uint16_t");
tdep->rl78_int32 = arch_integer_type (gdbarch, 32, 0, "int32_t");
tdep->rl78_data_pointer
- = arch_type (gdbarch, TYPE_CODE_PTR, 16 / TARGET_CHAR_BIT,
- xstrdup ("rl78_data_addr_t"));
- TYPE_TARGET_TYPE (tdep->rl78_data_pointer) = tdep->rl78_void;
- TYPE_UNSIGNED (tdep->rl78_data_pointer) = 1;
-
+ = arch_pointer_type (gdbarch, 16, "rl78_data_addr_t", tdep->rl78_void);
tdep->rl78_code_pointer
- = arch_type (gdbarch, TYPE_CODE_PTR, 32 / TARGET_CHAR_BIT,
- xstrdup ("rl78_code_addr_t"));
- TYPE_TARGET_TYPE (tdep->rl78_code_pointer) = tdep->rl78_void;
- TYPE_UNSIGNED (tdep->rl78_code_pointer) = 1;
+ = arch_pointer_type (gdbarch, 32, "rl78_code_addr_t", tdep->rl78_void);
/* Registers. */
set_gdbarch_num_regs (gdbarch, RL78_NUM_REGS);
set_gdbarch_addr_bits_remove (gdbarch, rl78_addr_bits_remove);
/* Breakpoints. */
- set_gdbarch_breakpoint_from_pc (gdbarch, rl78_breakpoint_from_pc);
+ set_gdbarch_breakpoint_kind_from_pc (gdbarch, rl78_breakpoint::kind_from_pc);
+ set_gdbarch_sw_breakpoint_from_kind (gdbarch, rl78_breakpoint::bp_from_kind);
set_gdbarch_decr_pc_after_break (gdbarch, 1);
- /* Disassembly. */
- set_gdbarch_print_insn (gdbarch, print_insn_rl78);
-
/* Frames, prologues, etc. */
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
set_gdbarch_skip_prologue (gdbarch, rl78_skip_prologue);
return gdbarch;
}
-/* -Wmissing-prototypes */
-extern initialize_file_ftype _initialize_rl78_tdep;
-
/* Register the above initialization routine. */
void