/* IBM RS/6000 native-dependent code for GDB, the GNU debugger.
- Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1989, 1991, 1992, 1994, 1995, 1996, 1997, 1998
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "inferior.h"
#include "xcoffsolib.h"
#include "symfile.h"
#include "objfiles.h"
-#include "libbfd.h" /* BFD internals (sigh!) FIXME */
+#include "libbfd.h" /* For bfd_cache_lookup (FIXME) */
#include "bfd.h"
+#include "gdb-stabs.h"
#include <sys/ptrace.h>
#include <sys/reg.h>
#include <a.out.h>
#include <sys/file.h>
-#include <sys/stat.h>
+#include "gdb_stat.h"
#include <sys/core.h>
#include <sys/ldr.h>
extern int errno;
+
extern struct vmap * map_vmap PARAMS ((bfd *bf, bfd *arch));
extern struct target_ops exec_ops;
+static void
+vmap_exec PARAMS ((void));
+
+static void
+vmap_ldinfo PARAMS ((struct ld_info *));
+
+static struct vmap *
+add_vmap PARAMS ((struct ld_info *));
+
+static int
+objfile_symbol_add PARAMS ((char *));
+
+static void
+vmap_symtab PARAMS ((struct vmap *));
+
+static void
+fetch_core_registers PARAMS ((char *, unsigned int, int, CORE_ADDR));
+
static void
exec_one_dummy_insn PARAMS ((void));
extern void
-add_text_to_loadinfo PARAMS ((CORE_ADDR textaddr, CORE_ADDR dataaddr));
+fixup_breakpoints PARAMS ((CORE_ADDR low, CORE_ADDR high, CORE_ADDR delta));
/* Conversion from gdb-to-system special purpose register numbers.. */
for (ii=0; ii < 32; ++ii)
ptrace (PT_READ_FPR, inferior_pid,
- (PTRACE_ARG3_TYPE) ®isters [REGISTER_BYTE (FP0_REGNUM+ii)],
+ (PTRACE_ARG3_TYPE) ®isters [REGISTER_BYTE (FP0_REGNUM+ii)],
FPR0+ii, 0);
/* read special registers. */
}
else if (regno <= FPLAST_REGNUM) { /* a FPR */
ptrace (PT_READ_FPR, inferior_pid,
- (PTRACE_ARG3_TYPE) ®isters [REGISTER_BYTE (regno)],
+ (PTRACE_ARG3_TYPE) ®isters [REGISTER_BYTE (regno)],
(regno-FP0_REGNUM+FPR0), 0);
}
else if (regno <= LAST_SP_REGNUM) { /* a special register */
errno = 0;
- if (regno == -1) { /* for all registers.. */
+ if (regno == -1)
+ { /* for all registers.. */
int ii;
/* execute one dummy instruction (which is a breakpoint) in inferior
exec_one_dummy_insn ();
/* write general purpose registers first! */
- for ( ii=GPR0; ii<=GPR31; ++ii) {
- ptrace (PT_WRITE_GPR, inferior_pid, (PTRACE_ARG3_TYPE) ii,
- *(int*)®isters[REGISTER_BYTE (ii)], 0);
- if ( errno ) {
- perror ("ptrace write_gpr"); errno = 0;
+ for ( ii=GPR0; ii<=GPR31; ++ii)
+ {
+ ptrace (PT_WRITE_GPR, inferior_pid, (PTRACE_ARG3_TYPE) ii,
+ *(int*)®isters[REGISTER_BYTE (ii)], 0);
+ if (errno)
+ {
+ perror ("ptrace write_gpr");
+ errno = 0;
+ }
}
- }
/* write floating point registers now. */
- for ( ii=0; ii < 32; ++ii) {
- ptrace (PT_WRITE_FPR, inferior_pid,
+ for ( ii=0; ii < 32; ++ii)
+ {
+ ptrace (PT_WRITE_FPR, inferior_pid,
(PTRACE_ARG3_TYPE) ®isters[REGISTER_BYTE (FP0_REGNUM+ii)],
- FPR0+ii, 0);
- if ( errno ) {
- perror ("ptrace write_fpr"); errno = 0;
- }
- }
+ FPR0+ii, 0);
+ if (errno)
+ {
+ perror ("ptrace write_fpr");
+ errno = 0;
+ }
+ }
/* write special registers. */
- for (ii=0; ii <= LAST_SP_REGNUM-FIRST_SP_REGNUM; ++ii) {
- ptrace (PT_WRITE_GPR, inferior_pid,
- (PTRACE_ARG3_TYPE) special_regs[ii],
- *(int*)®isters[REGISTER_BYTE (FIRST_SP_REGNUM+ii)], 0);
- if ( errno ) {
- perror ("ptrace write_gpr"); errno = 0;
+ for (ii=0; ii <= LAST_SP_REGNUM-FIRST_SP_REGNUM; ++ii)
+ {
+ ptrace (PT_WRITE_GPR, inferior_pid,
+ (PTRACE_ARG3_TYPE) special_regs[ii],
+ *(int*)®isters[REGISTER_BYTE (FIRST_SP_REGNUM+ii)], 0);
+ if (errno)
+ {
+ perror ("ptrace write_gpr");
+ errno = 0;
+ }
}
- }
- }
+ }
/* else, a specific register number is given... */
- else if (regno < FP0_REGNUM) { /* a GPR */
-
- ptrace (PT_WRITE_GPR, inferior_pid, (PTRACE_ARG3_TYPE) regno,
- *(int*)®isters[REGISTER_BYTE (regno)], 0);
- }
-
- else if (regno <= FPLAST_REGNUM) { /* a FPR */
- ptrace (PT_WRITE_FPR, inferior_pid,
- (PTRACE_ARG3_TYPE) ®isters[REGISTER_BYTE (regno)],
- regno-FP0_REGNUM+FPR0, 0);
- }
+ else if (regno < FP0_REGNUM) /* a GPR */
+ {
+ ptrace (PT_WRITE_GPR, inferior_pid, (PTRACE_ARG3_TYPE) regno,
+ *(int*)®isters[REGISTER_BYTE (regno)], 0);
+ }
- else if (regno <= LAST_SP_REGNUM) { /* a special register */
+ else if (regno <= FPLAST_REGNUM) /* a FPR */
+ {
+ ptrace (PT_WRITE_FPR, inferior_pid,
+ (PTRACE_ARG3_TYPE) ®isters[REGISTER_BYTE (regno)],
+ regno - FP0_REGNUM + FPR0, 0);
+ }
- ptrace (PT_WRITE_GPR, inferior_pid,
- (PTRACE_ARG3_TYPE) special_regs [regno-FIRST_SP_REGNUM],
- *(int*)®isters[REGISTER_BYTE (regno)], 0);
- }
+ else if (regno <= LAST_SP_REGNUM) /* a special register */
+ {
+ ptrace (PT_WRITE_GPR, inferior_pid,
+ (PTRACE_ARG3_TYPE) special_regs [regno-FIRST_SP_REGNUM],
+ *(int*)®isters[REGISTER_BYTE (regno)], 0);
+ }
else
fprintf_unfiltered (gdb_stderr, "Gdb error: register no %d not implemented.\n", regno);
- if ( errno ) {
- perror ("ptrace write"); errno = 0;
- }
+ if (errno)
+ {
+ perror ("ptrace write");
+ errno = 0;
+ }
}
/* Execute one dummy breakpoint instruction. This way we give the kernel
a chance to do some housekeeping and update inferior's internal data,
including u_area. */
+
static void
exec_one_dummy_insn ()
{
#define DUMMY_INSN_ADDR (TEXT_SEGMENT_BASE)+0x200
- unsigned long shadow;
- unsigned int status, pid;
+ char shadow_contents[BREAKPOINT_MAX]; /* Stash old bkpt addr contents */
+ int status, pid;
+ CORE_ADDR prev_pc;
/* We plant one dummy breakpoint into DUMMY_INSN_ADDR address. We assume that
this address will never be executed again by the real code. */
- target_insert_breakpoint (DUMMY_INSN_ADDR, &shadow);
+ target_insert_breakpoint (DUMMY_INSN_ADDR, shadow_contents);
errno = 0;
- ptrace (PT_CONTINUE, inferior_pid, (PTRACE_ARG3_TYPE) DUMMY_INSN_ADDR, 0, 0);
+
+ /* You might think this could be done with a single ptrace call, and
+ you'd be correct for just about every platform I've ever worked
+ on. However, rs6000-ibm-aix4.1.3 seems to have screwed this up --
+ the inferior never hits the breakpoint (it's also worth noting
+ powerpc-ibm-aix4.1.3 works correctly). */
+ prev_pc = read_pc ();
+ write_pc (DUMMY_INSN_ADDR);
+ ptrace (PT_CONTINUE, inferior_pid, (PTRACE_ARG3_TYPE)1, 0, 0);
+
if (errno)
perror ("pt_continue");
pid = wait (&status);
} while (pid != inferior_pid);
- target_remove_breakpoint (DUMMY_INSN_ADDR, &shadow);
+ write_pc (prev_pc);
+ target_remove_breakpoint (DUMMY_INSN_ADDR, shadow_contents);
}
-void
+static void
fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
char *core_reg_sect;
unsigned core_reg_size;
int which;
- unsigned int reg_addr; /* Unused in this version */
+ CORE_ADDR reg_addr; /* Unused in this version */
{
/* fetch GPRs and special registers from the first register section
in core bfd. */
- if (which == 0) {
-
- /* copy GPRs first. */
- memcpy (registers, core_reg_sect, 32 * 4);
-
- /* gdb's internal register template and bfd's register section layout
- should share a common include file. FIXMEmgo */
- /* then comes special registes. They are supposed to be in the same
- order in gdb template and bfd `.reg' section. */
- core_reg_sect += (32 * 4);
- memcpy (®isters [REGISTER_BYTE (FIRST_SP_REGNUM)], core_reg_sect,
- (LAST_SP_REGNUM - FIRST_SP_REGNUM + 1) * 4);
- }
+ if (which == 0)
+ {
+ /* copy GPRs first. */
+ memcpy (registers, core_reg_sect, 32 * 4);
+
+ /* gdb's internal register template and bfd's register section layout
+ should share a common include file. FIXMEmgo */
+ /* then comes special registes. They are supposed to be in the same
+ order in gdb template and bfd `.reg' section. */
+ core_reg_sect += (32 * 4);
+ memcpy (®isters [REGISTER_BYTE (FIRST_SP_REGNUM)], core_reg_sect,
+ (LAST_SP_REGNUM - FIRST_SP_REGNUM + 1) * 4);
+ }
/* fetch floating point registers from register section 2 in core bfd. */
else if (which == 2)
fprintf_unfiltered (gdb_stderr, "Gdb error: unknown parameter to fetch_core_registers().\n");
}
\f
-/* vmap_symtab - handle symbol translation on vmapping */
+/* handle symbol translation on vmapping */
static void
vmap_symtab (vp)
register struct vmap *vp;
{
register struct objfile *objfile;
- asection *textsec;
- asection *datasec;
- asection *bsssec;
- CORE_ADDR text_delta;
- CORE_ADDR data_delta;
- CORE_ADDR bss_delta;
struct section_offsets *new_offsets;
int i;
for (i = 0; i < objfile->num_sections; ++i)
ANOFFSET (new_offsets, i) = ANOFFSET (objfile->section_offsets, i);
- textsec = bfd_get_section_by_name (vp->bfd, ".text");
- text_delta =
- vp->tstart - ANOFFSET (objfile->section_offsets, textsec->target_index);
- ANOFFSET (new_offsets, textsec->target_index) = vp->tstart;
-
- datasec = bfd_get_section_by_name (vp->bfd, ".data");
- data_delta =
- vp->dstart - ANOFFSET (objfile->section_offsets, datasec->target_index);
- ANOFFSET (new_offsets, datasec->target_index) = vp->dstart;
-
- bsssec = bfd_get_section_by_name (vp->bfd, ".bss");
- bss_delta =
- vp->dstart - ANOFFSET (objfile->section_offsets, bsssec->target_index);
- ANOFFSET (new_offsets, bsssec->target_index) = vp->dstart;
+ /* The symbols in the object file are linked to the VMA of the section,
+ relocate them VMA relative. */
+ ANOFFSET (new_offsets, SECT_OFF_TEXT) = vp->tstart - vp->tvma;
+ ANOFFSET (new_offsets, SECT_OFF_DATA) = vp->dstart - vp->dvma;
+ ANOFFSET (new_offsets, SECT_OFF_BSS) = vp->dstart - vp->dvma;
objfile_relocate (objfile, new_offsets);
-
- {
- struct obj_section *s;
- for (s = objfile->sections; s < objfile->sections_end; ++s)
- {
- if (s->sec_ptr->target_index == textsec->target_index)
- {
- s->addr += text_delta;
- s->endaddr += text_delta;
- }
- else if (s->sec_ptr->target_index == datasec->target_index)
- {
- s->addr += data_delta;
- s->endaddr += data_delta;
- }
- else if (s->sec_ptr->target_index == bsssec->target_index)
- {
- s->addr += bss_delta;
- s->endaddr += bss_delta;
- }
- }
- }
-
- if (text_delta != 0)
- /* breakpoints need to be relocated as well. */
- fixup_breakpoints (0, TEXT_SEGMENT_BASE, text_delta);
}
\f
/* Add symbols for an objfile. */
+
static int
objfile_symbol_add (arg)
char *arg;
{
struct objfile *obj = (struct objfile *) arg;
+
syms_from_objfile (obj, 0, 0, 0);
new_symfile_objfile (obj, 0, 0);
return 1;
core file), the caller should set it to -1, and we will open the file.
Return the vmap new entry. */
+
static struct vmap *
-add_vmap(ldi)
+add_vmap (ldi)
register struct ld_info *ldi;
{
- bfd *abfd, *last;
- register char *mem, *objname;
- struct objfile *obj;
- struct vmap *vp;
-
- /* This ldi structure was allocated using alloca() in
- xcoff_relocate_symtab(). Now we need to have persistent object
- and member names, so we should save them. */
-
- mem = ldi->ldinfo_filename + strlen(ldi->ldinfo_filename) + 1;
- mem = savestring (mem, strlen (mem));
- objname = savestring (ldi->ldinfo_filename, strlen (ldi->ldinfo_filename));
-
- if (ldi->ldinfo_fd < 0)
- /* Note that this opens it once for every member; a possible
- enhancement would be to only open it once for every object. */
- abfd = bfd_openr (objname, gnutarget);
- else
- abfd = bfd_fdopenr(objname, gnutarget, ldi->ldinfo_fd);
- if (!abfd)
- error("Could not open `%s' as an executable file: %s",
- objname, bfd_errmsg(bfd_error));
-
-
- /* make sure we have an object file */
-
- if (bfd_check_format(abfd, bfd_object))
- vp = map_vmap (abfd, 0);
-
- else if (bfd_check_format(abfd, bfd_archive)) {
- last = 0;
- /*
- * FIXME??? am I tossing BFDs? bfd?
- */
- while (last = bfd_openr_next_archived_file(abfd, last))
- if (STREQ(mem, last->filename))
- break;
-
- if (!last) {
- bfd_close(abfd);
- /* FIXME -- should be error */
- warning("\"%s\": member \"%s\" missing.", abfd->filename, mem);
- return;
- }
-
- if (!bfd_check_format(last, bfd_object)) {
- bfd_close(last); /* XXX??? */
- goto obj_err;
- }
-
- vp = map_vmap (last, abfd);
+ bfd *abfd, *last;
+ register char *mem, *objname;
+ struct objfile *obj;
+ struct vmap *vp;
+
+ /* This ldi structure was allocated using alloca() in
+ xcoff_relocate_symtab(). Now we need to have persistent object
+ and member names, so we should save them. */
+
+ mem = ldi->ldinfo_filename + strlen (ldi->ldinfo_filename) + 1;
+ mem = savestring (mem, strlen (mem));
+ objname = savestring (ldi->ldinfo_filename, strlen (ldi->ldinfo_filename));
+
+ if (ldi->ldinfo_fd < 0)
+ /* Note that this opens it once for every member; a possible
+ enhancement would be to only open it once for every object. */
+ abfd = bfd_openr (objname, gnutarget);
+ else
+ abfd = bfd_fdopenr (objname, gnutarget, ldi->ldinfo_fd);
+ if (!abfd)
+ error ("Could not open `%s' as an executable file: %s",
+ objname, bfd_errmsg (bfd_get_error ()));
+
+ /* make sure we have an object file */
+
+ if (bfd_check_format (abfd, bfd_object))
+ vp = map_vmap (abfd, 0);
+
+ else if (bfd_check_format (abfd, bfd_archive))
+ {
+ last = 0;
+ /* FIXME??? am I tossing BFDs? bfd? */
+ while ((last = bfd_openr_next_archived_file (abfd, last)))
+ if (STREQ (mem, last->filename))
+ break;
+
+ if (!last)
+ {
+ bfd_close (abfd);
+ /* FIXME -- should be error */
+ warning ("\"%s\": member \"%s\" missing.", abfd->filename, mem);
+ return 0;
}
- else {
- obj_err:
- bfd_close(abfd);
- error ("\"%s\": not in executable format: %s.",
- objname, bfd_errmsg(bfd_error));
- /*NOTREACHED*/
+
+ if (!bfd_check_format(last, bfd_object))
+ {
+ bfd_close (last); /* XXX??? */
+ goto obj_err;
}
- obj = allocate_objfile (vp->bfd, 0);
- vp->objfile = obj;
+
+ vp = map_vmap (last, abfd);
+ }
+ else
+ {
+ obj_err:
+ bfd_close (abfd);
+ error ("\"%s\": not in executable format: %s.",
+ objname, bfd_errmsg (bfd_get_error ()));
+ /*NOTREACHED*/
+ }
+ obj = allocate_objfile (vp->bfd, 0, 0, 0);
+ vp->objfile = obj;
#ifndef SOLIB_SYMBOLS_MANUAL
- if (catch_errors (objfile_symbol_add, (char *)obj,
- "Error while reading shared library symbols:\n",
- RETURN_MASK_ALL))
- {
- /* Note this is only done if symbol reading was successful. */
- vmap_symtab (vp);
- vp->loaded = 1;
- }
+ if (catch_errors (objfile_symbol_add, (char *)obj,
+ "Error while reading shared library symbols:\n",
+ RETURN_MASK_ALL))
+ {
+ /* Note this is only done if symbol reading was successful. */
+ vmap_symtab (vp);
+ vp->loaded = 1;
+ }
#endif
- return vp;
+ return vp;
}
\f
-/*
- * vmap_ldinfo - update VMAP info with ldinfo() information
- *
- * Input:
- * ldi - ^ to ldinfo() results.
- */
+/* update VMAP info with ldinfo() information
+ Input is ptr to ldinfo() results. */
static void
-vmap_ldinfo(ldi)
+vmap_ldinfo (ldi)
register struct ld_info *ldi;
{
struct stat ii, vi;
register struct vmap *vp;
- register got_one, retried;
- CORE_ADDR ostart;
-
- /*
- * for each *ldi, see if we have a corresponding *vp
- * if so, update the mapping, and symbol table.
- * if not, add an entry and symbol table.
- */
- do {
- char *name = ldi->ldinfo_filename;
- char *memb = name + strlen(name) + 1;
-
- retried = 0;
+ int got_one, retried;
+ int got_exec_file = 0;
- if (fstat(ldi->ldinfo_fd, &ii) < 0)
- fatal("cannot fstat(%d) on %s"
- , ldi->ldinfo_fd
- , name);
-retry:
- for (got_one = 0, vp = vmap; vp; vp = vp->nxt) {
- FILE *io;
+ /* For each *ldi, see if we have a corresponding *vp.
+ If so, update the mapping, and symbol table.
+ If not, add an entry and symbol table. */
- /* First try to find a `vp', which is the same as in ldinfo.
- If not the same, just continue and grep the next `vp'. If same,
- relocate its tstart, tend, dstart, dend values. If no such `vp'
- found, get out of this for loop, add this ldi entry as a new vmap
- (add_vmap) and come back, fins its `vp' and so on... */
+ do {
+ char *name = ldi->ldinfo_filename;
+ char *memb = name + strlen(name) + 1;
- /* The filenames are not always sufficient to match on. */
+ retried = 0;
- if ((name[0] == '/' && !STREQ(name, vp->name))
- || (memb[0] && !STREQ(memb, vp->member)))
+ if (fstat (ldi->ldinfo_fd, &ii) < 0)
+ {
+ /* The kernel sets ld_info to -1, if the process is still using the
+ object, and the object is removed. Keep the symbol info for the
+ removed object and issue a warning. */
+ warning ("%s (fd=%d) has disappeared, keeping its symbols",
+ name, ldi->ldinfo_fd);
+ continue;
+ }
+ retry:
+ for (got_one = 0, vp = vmap; vp; vp = vp->nxt)
+ {
+ struct objfile *objfile;
+
+ /* First try to find a `vp', which is the same as in ldinfo.
+ If not the same, just continue and grep the next `vp'. If same,
+ relocate its tstart, tend, dstart, dend values. If no such `vp'
+ found, get out of this for loop, add this ldi entry as a new vmap
+ (add_vmap) and come back, find its `vp' and so on... */
+
+ /* The filenames are not always sufficient to match on. */
+
+ if ((name[0] == '/' && !STREQ(name, vp->name))
+ || (memb[0] && !STREQ(memb, vp->member)))
+ continue;
+
+ /* See if we are referring to the same file.
+ We have to check objfile->obfd, symfile.c:reread_symbols might
+ have updated the obfd after a change. */
+ objfile = vp->objfile == NULL ? symfile_objfile : vp->objfile;
+ if (objfile == NULL
+ || objfile->obfd == NULL
+ || bfd_stat (objfile->obfd, &vi) < 0)
+ {
+ warning ("Unable to stat %s, keeping its symbols", name);
continue;
+ }
- io = bfd_cache_lookup(vp->bfd); /* totally opaque! */
- if (!io)
- fatal("cannot find BFD's iostream for %s", vp->name);
-
- /* see if we are referring to the same file */
-
- if (fstat(fileno(io), &vi) < 0)
- fatal("cannot fstat BFD for %s", vp->name);
+ if (ii.st_dev != vi.st_dev || ii.st_ino != vi.st_ino)
+ continue;
- if (ii.st_dev != vi.st_dev || ii.st_ino != vi.st_ino)
- continue;
+ if (!retried)
+ close (ldi->ldinfo_fd);
- if (!retried)
- close(ldi->ldinfo_fd);
+ ++got_one;
- ++got_one;
+ /* Found a corresponding VMAP. Remap! */
- /* found a corresponding VMAP. remap! */
- ostart = vp->tstart;
+ /* We can assume pointer == CORE_ADDR, this code is native only. */
+ vp->tstart = (CORE_ADDR) ldi->ldinfo_textorg;
+ vp->tend = vp->tstart + ldi->ldinfo_textsize;
+ vp->dstart = (CORE_ADDR) ldi->ldinfo_dataorg;
+ vp->dend = vp->dstart + ldi->ldinfo_datasize;
- /* We can assume pointer == CORE_ADDR, this code is native only. */
- vp->tstart = (CORE_ADDR) ldi->ldinfo_textorg;
- vp->tend = vp->tstart + ldi->ldinfo_textsize;
- vp->dstart = (CORE_ADDR) ldi->ldinfo_dataorg;
- vp->dend = vp->dstart + ldi->ldinfo_datasize;
+ /* The run time loader maps the file header in addition to the text
+ section and returns a pointer to the header in ldinfo_textorg.
+ Adjust the text start address to point to the real start address
+ of the text section. */
+ vp->tstart += vp->toffs;
- if (vp->tadj) {
- vp->tstart += vp->tadj;
- vp->tend += vp->tadj;
- }
+ /* The objfile is only NULL for the exec file. */
+ if (vp->objfile == NULL)
+ got_exec_file = 1;
- /* relocate symbol table(s). */
- vmap_symtab (vp);
+ /* relocate symbol table(s). */
+ vmap_symtab (vp);
- /* there may be more, so we don't break out of the loop. */
- }
+ /* There may be more, so we don't break out of the loop. */
+ }
- /* if there was no matching *vp, we must perforce create the sucker(s) */
- if (!got_one && !retried) {
- add_vmap(ldi);
- ++retried;
- goto retry;
- }
+ /* if there was no matching *vp, we must perforce create the sucker(s) */
+ if (!got_one && !retried)
+ {
+ add_vmap (ldi);
+ ++retried;
+ goto retry;
+ }
} while (ldi->ldinfo_next
&& (ldi = (void *) (ldi->ldinfo_next + (char *) ldi)));
+ /* If we don't find the symfile_objfile anywhere in the ldinfo, it
+ is unlikely that the symbol file is relocated to the proper
+ address. And we might have attached to a process which is
+ running a different copy of the same executable. */
+ if (symfile_objfile != NULL && !got_exec_file)
+ {
+ warning_begin ();
+ fputs_unfiltered ("Symbol file ", gdb_stderr);
+ fputs_unfiltered (symfile_objfile->name, gdb_stderr);
+ fputs_unfiltered ("\nis not mapped; discarding it.\n\
+If in fact that file has symbols which the mapped files listed by\n\
+\"info files\" lack, you can load symbols with the \"symbol-file\" or\n\
+\"add-symbol-file\" commands (note that you must take care of relocating\n\
+symbols to the proper address).\n", gdb_stderr);
+ free_objfile (symfile_objfile);
+ symfile_objfile = NULL;
+ }
+ breakpoint_re_set ();
}
\f
/* As well as symbol tables, exec_sections need relocation. After
for (i=0; &exec_ops.to_sections[i] < exec_ops.to_sections_end; i++)
{
- if (STREQ(".text", exec_ops.to_sections[i].sec_ptr->name))
+ if (STREQ(".text", exec_ops.to_sections[i].the_bfd_section->name))
{
- exec_ops.to_sections[i].addr += vmap->tstart;
- exec_ops.to_sections[i].endaddr += vmap->tstart;
+ exec_ops.to_sections[i].addr += vmap->tstart - vmap->tvma;
+ exec_ops.to_sections[i].endaddr += vmap->tstart - vmap->tvma;
}
- else if (STREQ(".data", exec_ops.to_sections[i].sec_ptr->name))
+ else if (STREQ(".data", exec_ops.to_sections[i].the_bfd_section->name))
{
- exec_ops.to_sections[i].addr += vmap->dstart;
- exec_ops.to_sections[i].endaddr += vmap->dstart;
+ exec_ops.to_sections[i].addr += vmap->dstart - vmap->dvma;
+ exec_ops.to_sections[i].endaddr += vmap->dstart - vmap->dvma;
+ }
+ else if (STREQ(".bss", exec_ops.to_sections[i].the_bfd_section->name))
+ {
+ exec_ops.to_sections[i].addr += vmap->dstart - vmap->dvma;
+ exec_ops.to_sections[i].endaddr += vmap->dstart - vmap->dvma;
}
}
}
/* xcoff_relocate_symtab - hook for symbol table relocation.
also reads shared libraries.. */
+void
xcoff_relocate_symtab (pid)
-unsigned int pid;
+ unsigned int pid;
{
#define MAX_LOAD_SEGS 64 /* maximum number of load segments */
- struct ld_info *ldi;
- int temp;
-
- ldi = (void *) alloca(MAX_LOAD_SEGS * sizeof (*ldi));
+ struct ld_info *ldi;
- /* According to my humble theory, AIX has some timing problems and
- when the user stack grows, kernel doesn't update stack info in time
- and ptrace calls step on user stack. That is why we sleep here a little,
- and give kernel to update its internals. */
+ ldi = (void *) alloca(MAX_LOAD_SEGS * sizeof (*ldi));
- usleep (36000);
-
- errno = 0;
- ptrace(PT_LDINFO, pid, (PTRACE_ARG3_TYPE) ldi,
- MAX_LOAD_SEGS * sizeof(*ldi), ldi);
- if (errno) {
- perror_with_name ("ptrace ldinfo");
- return 0;
- }
+ /* According to my humble theory, AIX has some timing problems and
+ when the user stack grows, kernel doesn't update stack info in time
+ and ptrace calls step on user stack. That is why we sleep here a little,
+ and give kernel to update its internals. */
- vmap_ldinfo(ldi);
+ usleep (36000);
- do {
- /* We are allowed to assume CORE_ADDR == pointer. This code is
- native only. */
- add_text_to_loadinfo ((CORE_ADDR) ldi->ldinfo_textorg,
- (CORE_ADDR) ldi->ldinfo_dataorg);
- } while (ldi->ldinfo_next
- && (ldi = (void *) (ldi->ldinfo_next + (char *) ldi)));
+ errno = 0;
+ ptrace (PT_LDINFO, pid, (PTRACE_ARG3_TYPE) ldi,
+ MAX_LOAD_SEGS * sizeof(*ldi), (int *) ldi);
+ if (errno)
+ perror_with_name ("ptrace ldinfo");
-#if 0
- /* Now that we've jumbled things around, re-sort them. */
- sort_minimal_symbols ();
-#endif
+ vmap_ldinfo (ldi);
/* relocate the exec and core sections as well. */
vmap_exec ();
/* Relocate symtabs and read in shared library info, based on symbols
from the core file. */
+
void
-xcoff_relocate_core ()
+xcoff_relocate_core (target)
+ struct target_ops *target;
{
/* Offset of member MEMBER in a struct of type TYPE. */
#ifndef offsetof
ldinfo_sec = bfd_get_section_by_name (core_bfd, ".ldinfo");
if (ldinfo_sec == NULL)
{
-bfd_err:
+ bfd_err:
fprintf_filtered (gdb_stderr, "Couldn't get ldinfo from core file: %s\n",
- bfd_errmsg (bfd_error));
+ bfd_errmsg (bfd_get_error ()));
do_cleanups (old);
return;
}
++names_found;
} while (names_found < 2);
- ldip = (struct ld_info *)buffer;
+ ldip = (struct ld_info *) buffer;
/* Can't use a file descriptor from the core file; need to open it. */
ldip->ldinfo_fd = -1;
vp->dstart = (CORE_ADDR) ldip->ldinfo_dataorg;
vp->dend = vp->dstart + ldip->ldinfo_datasize;
- if (vp->tadj != 0) {
- vp->tstart += vp->tadj;
- vp->tend += vp->tadj;
- }
+ /* The run time loader maps the file header in addition to the text
+ section and returns a pointer to the header in ldinfo_textorg.
+ Adjust the text start address to point to the real start address
+ of the text section. */
+ vp->tstart += vp->toffs;
/* Unless this is the exec file,
add our sections to the section table for the core target. */
{
int count;
struct section_table *stp;
+ int update_coreops;
+
+ /* We must update the to_sections field in the core_ops structure
+ now to avoid dangling pointer dereferences. */
+ update_coreops = core_ops.to_sections == target->to_sections;
- count = core_ops.to_sections_end - core_ops.to_sections;
+ count = target->to_sections_end - target->to_sections;
count += 2;
- core_ops.to_sections = (struct section_table *)
- xrealloc (core_ops.to_sections,
+ target->to_sections = (struct section_table *)
+ xrealloc (target->to_sections,
sizeof (struct section_table) * count);
- core_ops.to_sections_end = core_ops.to_sections + count;
- stp = core_ops.to_sections_end - 2;
-
- /* "Why do we add bfd_section_vma?", I hear you cry.
- Well, the start of the section in the file is actually
- that far into the section as the struct vmap understands it.
- So for text sections, bfd_section_vma tends to be 0x200,
- and if vp->tstart is 0xd0002000, then the first byte of
- the text section on disk corresponds to address 0xd0002200. */
+ target->to_sections_end = target->to_sections + count;
+
+ /* Update the to_sections field in the core_ops structure
+ if needed. */
+ if (update_coreops)
+ {
+ core_ops.to_sections = target->to_sections;
+ core_ops.to_sections_end = target->to_sections_end;
+ }
+ stp = target->to_sections_end - 2;
+
stp->bfd = vp->bfd;
- stp->sec_ptr = bfd_get_section_by_name (stp->bfd, ".text");
- stp->addr = bfd_section_vma (stp->bfd, stp->sec_ptr) + vp->tstart;
- stp->endaddr = bfd_section_vma (stp->bfd, stp->sec_ptr) + vp->tend;
+ stp->the_bfd_section = bfd_get_section_by_name (stp->bfd, ".text");
+ stp->addr = vp->tstart;
+ stp->endaddr = vp->tend;
stp++;
stp->bfd = vp->bfd;
- stp->sec_ptr = bfd_get_section_by_name (stp->bfd, ".data");
- stp->addr = bfd_section_vma (stp->bfd, stp->sec_ptr) + vp->dstart;
- stp->endaddr = bfd_section_vma (stp->bfd, stp->sec_ptr) + vp->dend;
+ stp->the_bfd_section = bfd_get_section_by_name (stp->bfd, ".data");
+ stp->addr = vp->dstart;
+ stp->endaddr = vp->dend;
}
vmap_symtab (vp);
-
- add_text_to_loadinfo ((CORE_ADDR)ldip->ldinfo_textorg,
- (CORE_ADDR)ldip->ldinfo_dataorg);
} while (ldip->ldinfo_next != 0);
vmap_exec ();
+ breakpoint_re_set ();
do_cleanups (old);
}
+
+int
+kernel_u_size ()
+{
+ return (sizeof (struct user));
+}
+\f
+/* Under AIX, we have to pass the correct TOC pointer to a function
+ when calling functions in the inferior.
+ We try to find the relative toc offset of the objfile containing PC
+ and add the current load address of the data segment from the vmap. */
+
+static CORE_ADDR
+find_toc_address (pc)
+ CORE_ADDR pc;
+{
+ struct vmap *vp;
+
+ for (vp = vmap; vp; vp = vp->nxt)
+ {
+ if (pc >= vp->tstart && pc < vp->tend)
+ {
+ /* vp->objfile is only NULL for the exec file. */
+ return vp->dstart + get_toc_offset (vp->objfile == NULL
+ ? symfile_objfile
+ : vp->objfile);
+ }
+ }
+ error ("Unable to find TOC entry for pc 0x%x\n", pc);
+}
+\f
+/* Register that we are able to handle rs6000 core file formats. */
+
+static struct core_fns rs6000_core_fns =
+{
+ bfd_target_coff_flavour,
+ fetch_core_registers,
+ NULL
+};
+
+void
+_initialize_core_rs6000 ()
+{
+ /* Initialize hook in rs6000-tdep.c for determining the TOC address when
+ calling functions in the inferior. */
+ find_toc_address_hook = &find_toc_address;
+
+ /* For native configurations, where this module is included, inform
+ the xcoffsolib module where it can find the function for symbol table
+ relocation at runtime. */
+ xcoff_relocate_symtab_hook = &xcoff_relocate_symtab;
+ add_core_fns (&rs6000_core_fns);
+}