minimal_toc_loaded = 1;
continue;
+ /* move parameters from argument registers to local variable
+ registers */
+ }
+ else if ((op & 0xfc0007fe) == 0x7c000378 && /* mr(.) Rx,Ry */
+ (((op >> 21) & 31) >= 3) && /* R3 >= Ry >= R10 */
+ (((op >> 21) & 31) <= 10) &&
+ (((op >> 16) & 31) >= fdata->saved_gpr)) /* Rx: local var reg */
+ {
+ continue;
+
/* store parameters in stack */
}
else if ((op & 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */
/*************************************************************************
- Support for creating pushind a dummy frame into the stack, and popping
+ Support for creating pushing a dummy frame into the stack, and popping
frames, etc.
*************************************************************************/
/* The total size of dummy frame is 436, which is;
- 32 gpr's - 128 bytes
- 32 fpr's - 256 "
- 7 the rest - 28 "
- and 24 extra bytes for the callee's link area. The last 24 bytes
- for the link area might not be necessary, since it will be taken
- care of by push_arguments(). */
+ 32 gpr's - 128 bytes
+ 32 fpr's - 256 bytes
+ 7 the rest - 28 bytes
+ callee's link area - 24 bytes
+ padding - 12 bytes
+
+ Note that the last 24 bytes for the link area might not be necessary,
+ since it will be taken care of by push_arguments(). */
-#define DUMMY_FRAME_SIZE 436
+#define DUMMY_FRAME_SIZE 448
#define DUMMY_FRAME_ADDR_SIZE 10
int ii;
CORE_ADDR target_addr;
- if (find_toc_address_hook != NULL)
+ if (USE_GENERIC_DUMMY_FRAMES)
{
- CORE_ADDR tocvalue;
+ if (find_toc_address_hook != NULL)
+ {
+ CORE_ADDR tocvalue = (*find_toc_address_hook) (fun);
+ write_register (TOC_REGNUM, tocvalue);
+ }
+ }
+ else
+ {
+ if (find_toc_address_hook != NULL)
+ {
+ CORE_ADDR tocvalue;
- tocvalue = (*find_toc_address_hook) (fun);
- ii = *(int *) ((char *) dummyname + TOC_ADDR_OFFSET);
- ii = (ii & 0xffff0000) | (tocvalue >> 16);
- *(int *) ((char *) dummyname + TOC_ADDR_OFFSET) = ii;
+ tocvalue = (*find_toc_address_hook) (fun);
+ ii = *(int *) ((char *) dummyname + TOC_ADDR_OFFSET);
+ ii = (ii & 0xffff0000) | (tocvalue >> 16);
+ *(int *) ((char *) dummyname + TOC_ADDR_OFFSET) = ii;
- ii = *(int *) ((char *) dummyname + TOC_ADDR_OFFSET + 4);
- ii = (ii & 0xffff0000) | (tocvalue & 0x0000ffff);
- *(int *) ((char *) dummyname + TOC_ADDR_OFFSET + 4) = ii;
- }
+ ii = *(int *) ((char *) dummyname + TOC_ADDR_OFFSET + 4);
+ ii = (ii & 0xffff0000) | (tocvalue & 0x0000ffff);
+ *(int *) ((char *) dummyname + TOC_ADDR_OFFSET + 4) = ii;
+ }
- target_addr = fun;
- ii = *(int *) ((char *) dummyname + TARGET_ADDR_OFFSET);
- ii = (ii & 0xffff0000) | (target_addr >> 16);
- *(int *) ((char *) dummyname + TARGET_ADDR_OFFSET) = ii;
+ target_addr = fun;
+ ii = *(int *) ((char *) dummyname + TARGET_ADDR_OFFSET);
+ ii = (ii & 0xffff0000) | (target_addr >> 16);
+ *(int *) ((char *) dummyname + TARGET_ADDR_OFFSET) = ii;
- ii = *(int *) ((char *) dummyname + TARGET_ADDR_OFFSET + 4);
- ii = (ii & 0xffff0000) | (target_addr & 0x0000ffff);
- *(int *) ((char *) dummyname + TARGET_ADDR_OFFSET + 4) = ii;
+ ii = *(int *) ((char *) dummyname + TARGET_ADDR_OFFSET + 4);
+ ii = (ii & 0xffff0000) | (target_addr & 0x0000ffff);
+ *(int *) ((char *) dummyname + TARGET_ADDR_OFFSET + 4) = ii;
+ }
}
/* Pass the arguments in either registers, or in the stack. In RS6000,
for (argno = 0, argbytes = 0; argno < nargs && ii < 8; ++ii)
{
+ int reg_size = REGISTER_RAW_SIZE (ii + 3);
arg = args[argno];
type = check_typedef (VALUE_TYPE (arg));
++f_argno;
}
- if (len > 4)
+ if (len > reg_size)
{
/* Argument takes more than one register. */
while (argbytes < len)
{
- memset (®isters[REGISTER_BYTE (ii + 3)], 0, sizeof (int));
+ memset (®isters[REGISTER_BYTE (ii + 3)], 0, reg_size);
memcpy (®isters[REGISTER_BYTE (ii + 3)],
((char *) VALUE_CONTENTS (arg)) + argbytes,
- (len - argbytes) > 4 ? 4 : len - argbytes);
- ++ii, argbytes += 4;
+ (len - argbytes) > reg_size
+ ? reg_size : len - argbytes);
+ ++ii, argbytes += reg_size;
if (ii >= 8)
goto ran_out_of_registers_for_arguments;
}
else
{ /* Argument can fit in one register. No problem. */
- memset (®isters[REGISTER_BYTE (ii + 3)], 0, sizeof (int));
- memcpy (®isters[REGISTER_BYTE (ii + 3)], VALUE_CONTENTS (arg), len);
+ int adj = TARGET_BYTE_ORDER == BIG_ENDIAN ? reg_size - len : 0;
+ memset (®isters[REGISTER_BYTE (ii + 3)], 0, reg_size);
+ memcpy ((char *)®isters[REGISTER_BYTE (ii + 3)] + adj,
+ VALUE_CONTENTS (arg), len);
}
++argno;
}
if (USE_GENERIC_DUMMY_FRAMES)
{
saved_sp = read_sp ();
+#ifndef ELF_OBJECT_FORMAT
+ /* location for 8 parameters are always reserved. */
+ sp -= 4 * 8;
+
+ /* another six words for back chain, TOC register, link register, etc. */
+ sp -= 24;
+
+ /* stack pointer must be quadword aligned */
+ sp &= -16;
+#endif
}
else
{
/* another six words for back chain, TOC register, link register, etc. */
sp -= 24;
+
+ /* stack pointer must be quadword aligned */
+ sp &= -16;
}
/* if there are more arguments, allocate space for them in
}
/* add location required for the rest of the parameters */
- space = (space + 7) & -8;
+ space = (space + 15) & -16;
sp -= space;
/* This is another instance we need to be concerned about securing our
target_store_registers (-1);
return sp;
}
-#ifdef ELF_OBJECT_FORMAT
+/* #ifdef ELF_OBJECT_FORMAT */
/* Function: ppc_push_return_address (pc, sp)
Set up the return address for the inferior function call. */
return sp;
}
-#endif
+/* #endif */
/* a given return value in `regbuf' with a type `valtype', extract and copy its
value into `valbuf' */
struct frame_info *fi;
struct rs6000_framedata *fdatap;
{
- int ii;
CORE_ADDR frame_addr;
struct rs6000_framedata work_fdata;
static void
set_processor (char *arg, int from_tty)
{
- int i;
-
if (!arg || arg[0] == '\0')
{
list_variants ();
{
show_current_variant ();
}
-\f
+\f
+
/* Initialization code. */
void
projects / deliverable / binutils-gdb.git / blobdiff