/* Target-dependent code for GDB, the GNU debugger.
Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software
Foundation, Inc.
This file is part of GDB.
#include "frame-unwind.h"
#include "frame-base.h"
+#include "reggroups.h"
+
/* If the kernel has to deliver a signal, it pushes a sigcontext
structure on the stack and then calls the signal handler, passing
the address of the sigcontext in an argument register. Usually
&& tdep->ppc_fpscr_regnum >= 0);
}
+
+/* Check that TABLE[GDB_REGNO] is not already initialized, and then
+ set it to SIM_REGNO.
+
+ This is a helper function for init_sim_regno_table, constructing
+ the table mapping GDB register numbers to sim register numbers; we
+ initialize every element in that table to -1 before we start
+ filling it in. */
static void
set_sim_regno (int *table, int gdb_regno, int sim_regno)
{
table[gdb_regno] = sim_regno;
}
+
+/* Initialize ARCH->tdep->sim_regno, the table mapping GDB register
+ numbers to simulator register numbers, based on the values placed
+ in the ARCH->tdep->ppc_foo_regnum members. */
static void
init_sim_regno_table (struct gdbarch *arch)
{
tdep->sim_regno = sim_regno;
}
+
+/* Given a GDB register number REG, return the corresponding SIM
+ register number. */
static int
rs6000_register_sim_regno (int reg)
{
continue;
}
- else if (lr_reg != -1 &&
+ else if (lr_reg >= 0 &&
/* std Rx, NUM(r1) || stdu Rx, NUM(r1) */
(((op & 0xffff0000) == (lr_reg | 0xf8010000)) ||
/* stw Rx, NUM(r1) */
{ /* where Rx == lr */
fdata->lr_offset = offset;
fdata->nosavedpc = 0;
- lr_reg = 0;
+ /* Invalidate lr_reg, but don't set it to -1.
+ That would mean that it had never been set. */
+ lr_reg = -2;
if ((op & 0xfc000003) == 0xf8000000 || /* std */
(op & 0xfc000000) == 0x90000000) /* stw */
{
continue;
}
- else if (cr_reg != -1 &&
+ else if (cr_reg >= 0 &&
/* std Rx, NUM(r1) || stdu Rx, NUM(r1) */
(((op & 0xffff0000) == (cr_reg | 0xf8010000)) ||
/* stw Rx, NUM(r1) */
((op & 0xffff0000) == (cr_reg | 0x94010000))))
{ /* where Rx == cr */
fdata->cr_offset = offset;
- cr_reg = 0;
+ /* Invalidate cr_reg, but don't set it to -1.
+ That would mean that it had never been set. */
+ cr_reg = -2;
if ((op & 0xfc000003) == 0xf8000000 ||
(op & 0xfc000000) == 0x90000000)
{
fdata->frameless = 0;
/* Don't skip over the subroutine call if it is not within
- the first three instructions of the prologue. */
+ the first three instructions of the prologue and either
+ we have no line table information or the line info tells
+ us that the subroutine call is not part of the line
+ associated with the prologue. */
if ((pc - orig_pc) > 8)
- break;
+ {
+ struct symtab_and_line prologue_sal = find_pc_line (orig_pc, 0);
+ struct symtab_and_line this_sal = find_pc_line (pc, 0);
+
+ if ((prologue_sal.line == 0) || (prologue_sal.line != this_sal.line))
+ break;
+ }
op = read_memory_integer (pc + 4, 4);
int reg_size = register_size (current_gdbarch, ii + 3);
arg = args[argno];
- type = check_typedef (VALUE_TYPE (arg));
+ type = check_typedef (value_type (arg));
len = TYPE_LENGTH (type);
if (TYPE_CODE (type) == TYPE_CODE_FLT)
There are 13 fpr's reserved for passing parameters. At this point
there is no way we would run out of them. */
- if (len > 8)
- printf_unfiltered ("Fatal Error: a floating point parameter "
- "#%d with a size > 8 is found!\n", argno);
+ gdb_assert (len <= 8);
- memcpy (&deprecated_registers[DEPRECATED_REGISTER_BYTE
- (tdep->ppc_fp0_regnum + 1 + f_argno)],
- VALUE_CONTENTS (arg),
- len);
+ regcache_cooked_write (regcache,
+ tdep->ppc_fp0_regnum + 1 + f_argno,
+ value_contents (arg));
++f_argno;
}
/* Argument takes more than one register. */
while (argbytes < len)
{
- memset (&deprecated_registers[DEPRECATED_REGISTER_BYTE (ii + 3)], 0,
- reg_size);
- memcpy (&deprecated_registers[DEPRECATED_REGISTER_BYTE (ii + 3)],
- ((char *) VALUE_CONTENTS (arg)) + argbytes,
+ char word[MAX_REGISTER_SIZE];
+ memset (word, 0, reg_size);
+ memcpy (word,
+ ((char *) value_contents (arg)) + argbytes,
(len - argbytes) > reg_size
? reg_size : len - argbytes);
+ regcache_cooked_write (regcache,
+ tdep->ppc_gp0_regnum + 3 + ii,
+ word);
++ii, argbytes += reg_size;
if (ii >= 8)
{
/* Argument can fit in one register. No problem. */
int adj = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? reg_size - len : 0;
- memset (&deprecated_registers[DEPRECATED_REGISTER_BYTE (ii + 3)], 0, reg_size);
- memcpy ((char *)&deprecated_registers[DEPRECATED_REGISTER_BYTE (ii + 3)] + adj,
- VALUE_CONTENTS (arg), len);
+ char word[MAX_REGISTER_SIZE];
+
+ memset (word, 0, reg_size);
+ memcpy (word, value_contents (arg), len);
+ regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 3 +ii, word);
}
++argno;
}
for (; jj < nargs; ++jj)
{
struct value *val = args[jj];
- space += ((TYPE_LENGTH (VALUE_TYPE (val))) + 3) & -4;
+ space += ((TYPE_LENGTH (value_type (val))) + 3) & -4;
}
/* Add location required for the rest of the parameters. */
if (argbytes)
{
write_memory (sp + 24 + (ii * 4),
- ((char *) VALUE_CONTENTS (arg)) + argbytes,
+ ((char *) value_contents (arg)) + argbytes,
len - argbytes);
++argno;
ii += ((len - argbytes + 3) & -4) / 4;
{
arg = args[argno];
- type = check_typedef (VALUE_TYPE (arg));
+ type = check_typedef (value_type (arg));
len = TYPE_LENGTH (type);
if (TYPE_CODE (type) == TYPE_CODE_FLT && f_argno < 13)
{
- if (len > 8)
- printf_unfiltered ("Fatal Error: a floating point parameter"
- " #%d with a size > 8 is found!\n", argno);
+ gdb_assert (len <= 8);
- memcpy (&(deprecated_registers
- [DEPRECATED_REGISTER_BYTE
- (tdep->ppc_fp0_regnum + 1 + f_argno)]),
- VALUE_CONTENTS (arg),
- len);
+ regcache_cooked_write (regcache,
+ tdep->ppc_fp0_regnum + 1 + f_argno,
+ value_contents (arg));
++f_argno;
}
write_memory (sp + 24 + (ii * 4),
- (char *) VALUE_CONTENTS (arg),
+ (char *) value_contents (arg),
len);
ii += ((len + 3) & -4) / 4;
}
back to where execution should continue.
GDB should silently step over @FIX code, just like AIX dbx does.
- Unfortunately, the linker uses the "b" instruction for the branches,
- meaning that the link register doesn't get set. Therefore, GDB's usual
- step_over_function() mechanism won't work.
+ Unfortunately, the linker uses the "b" instruction for the
+ branches, meaning that the link register doesn't get set.
+ Therefore, GDB's usual step_over_function () mechanism won't work.
- Instead, use the IN_SOLIB_RETURN_TRAMPOLINE and SKIP_TRAMPOLINE_CODE hooks
- in handle_inferior_event() to skip past @FIX code. */
+ Instead, use the IN_SOLIB_RETURN_TRAMPOLINE and
+ SKIP_TRAMPOLINE_CODE hooks in handle_inferior_event() to skip past
+ @FIX code. */
int
rs6000_in_solib_return_trampoline (CORE_ADDR pc, char *name)
/* Check for bigtoc fixup code. */
msymbol = lookup_minimal_symbol_by_pc (pc);
- if (msymbol && rs6000_in_solib_return_trampoline (pc, DEPRECATED_SYMBOL_NAME (msymbol)))
+ if (msymbol
+ && rs6000_in_solib_return_trampoline (pc,
+ DEPRECATED_SYMBOL_NAME (msymbol)))
{
/* Double-check that the third instruction from PC is relative "b". */
op = read_memory_integer (pc + 8, 4);
return builtin_type_vec128;
break;
default:
- internal_error (__FILE__, __LINE__, "Register %d size %d unknown",
+ internal_error (__FILE__, __LINE__, _("Register %d size %d unknown"),
n, size);
}
}
}
+/* Is REGNUM a member of REGGROUP? */
+static int
+rs6000_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
+ struct reggroup *group)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ int float_p;
+ int vector_p;
+ int general_p;
+
+ if (REGISTER_NAME (regnum) == NULL
+ || *REGISTER_NAME (regnum) == '\0')
+ return 0;
+ if (group == all_reggroup)
+ return 1;
+
+ float_p = (regnum == tdep->ppc_fpscr_regnum
+ || (regnum >= tdep->ppc_fp0_regnum
+ && regnum < tdep->ppc_fp0_regnum + 32));
+ if (group == float_reggroup)
+ return float_p;
+
+ vector_p = ((regnum >= tdep->ppc_vr0_regnum
+ && regnum < tdep->ppc_vr0_regnum + 32)
+ || (regnum >= tdep->ppc_ev0_regnum
+ && regnum < tdep->ppc_ev0_regnum + 32)
+ || regnum == tdep->ppc_vrsave_regnum
+ || regnum == tdep->ppc_acc_regnum
+ || regnum == tdep->ppc_spefscr_regnum);
+ if (group == vector_reggroup)
+ return vector_p;
+
+ /* Note that PS aka MSR isn't included - it's a system register (and
+ besides, due to GCC's CFI foobar you do not want to restore
+ it). */
+ general_p = ((regnum >= tdep->ppc_gp0_regnum
+ && regnum < tdep->ppc_gp0_regnum + 32)
+ || regnum == tdep->ppc_toc_regnum
+ || regnum == tdep->ppc_cr_regnum
+ || regnum == tdep->ppc_lr_regnum
+ || regnum == tdep->ppc_ctr_regnum
+ || regnum == tdep->ppc_xer_regnum
+ || regnum == PC_REGNUM);
+ if (group == general_reggroup)
+ return general_p;
+
+ if (group == save_reggroup || group == restore_reggroup)
+ return general_p || vector_p || float_p;
+
+ return 0;
+}
+
/* The register format for RS/6000 floating point registers is always
double, we need a conversion if the memory format is float. */
&& reg_nr < tdep->ppc_ev0_regnum + ppc_num_gprs)
e500_move_ev_register (regcache_raw_read, regcache, reg_nr, buffer);
else
- /* We should only be called on pseudo-registers. */
- gdb_assert (0);
+ internal_error (__FILE__, __LINE__,
+ _("e500_pseudo_register_read: "
+ "called on unexpected register '%s' (%d)"),
+ gdbarch_register_name (gdbarch, reg_nr), reg_nr);
}
static void
regcache_raw_write,
regcache, reg_nr, (void *) buffer);
else
- /* We should only be called on pseudo-registers. */
- gdb_assert (0);
+ internal_error (__FILE__, __LINE__,
+ _("e500_pseudo_register_read: "
+ "called on unexpected register '%s' (%d)"),
+ gdbarch_register_name (gdbarch, reg_nr), reg_nr);
}
/* The E500 needs a custom reggroup function: it has anonymous raw
&& TYPE_VECTOR (type))
regnum = tdep->ppc_vr0_regnum + 2;
else
- gdb_assert (0);
+ internal_error (__FILE__, __LINE__,
+ _("rs6000_store_return_value: "
+ "unexpected array return type"));
}
else
/* Everything else is returned in GPR3 and up. */
}
else
internal_error (__FILE__, __LINE__,
- "rs6000_gdbarch_init: "
- "received unexpected BFD 'arch' value");
+ _("rs6000_gdbarch_init: "
+ "received unexpected BFD 'arch' value"));
/* Sanity check on registers. */
gdb_assert (strcmp (tdep->regs[tdep->ppc_gp0_regnum].name, "r0") == 0);
set_gdbarch_num_pseudo_regs (gdbarch, v->npregs);
set_gdbarch_register_name (gdbarch, rs6000_register_name);
set_gdbarch_register_type (gdbarch, rs6000_register_type);
+ set_gdbarch_register_reggroup_p (gdbarch, rs6000_register_reggroup_p);
set_gdbarch_ptr_bit (gdbarch, wordsize * TARGET_CHAR_BIT);
set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT);
/* Add root prefix command for "info powerpc" commands */
add_prefix_cmd ("powerpc", class_info, rs6000_info_powerpc_command,
- "Various POWERPC info specific commands.",
+ _("Various POWERPC info specific commands."),
&info_powerpc_cmdlist, "info powerpc ", 0, &infolist);
}
projects / deliverable / binutils-gdb.git / blobdiff