/* Target-dependent code for GDB, the GNU debugger.
Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software
Foundation, Inc.
This file is part of GDB.
#include "parser-defs.h"
#include "osabi.h"
#include "infcall.h"
+#include "sim-regno.h"
+#include "gdb/sim-ppc.h"
+#include "reggroups.h"
#include "libbfd.h" /* for bfd_default_set_arch_mach */
#include "coff/internal.h" /* for libcoff.h */
#include "frame-unwind.h"
#include "frame-base.h"
+#include "reggroups.h"
+
/* If the kernel has to deliver a signal, it pushes a sigcontext
structure on the stack and then calls the signal handler, passing
the address of the sigcontext in an argument register. Usually
&& tdep->ppc_ev0_regnum <= regno && regno <= tdep->ppc_ev31_regnum)
return 1;
+ /* Is it a reference to one of the raw upper GPR halves? */
+ if (tdep->ppc_ev0_upper_regnum >= 0
+ && tdep->ppc_ev0_upper_regnum <= regno
+ && regno < tdep->ppc_ev0_upper_regnum + ppc_num_gprs)
+ return 1;
+
/* Is it a reference to the 64-bit accumulator, and do we have that? */
if (tdep->ppc_acc_regnum >= 0
&& tdep->ppc_acc_regnum == regno)
return (tdep->ppc_fp0_regnum >= 0
&& tdep->ppc_fpscr_regnum >= 0);
}
+
+
+/* Check that TABLE[GDB_REGNO] is not already initialized, and then
+ set it to SIM_REGNO.
+
+ This is a helper function for init_sim_regno_table, constructing
+ the table mapping GDB register numbers to sim register numbers; we
+ initialize every element in that table to -1 before we start
+ filling it in. */
+static void
+set_sim_regno (int *table, int gdb_regno, int sim_regno)
+{
+ /* Make sure we don't try to assign any given GDB register a sim
+ register number more than once. */
+ gdb_assert (table[gdb_regno] == -1);
+ table[gdb_regno] = sim_regno;
+}
+
+
+/* Initialize ARCH->tdep->sim_regno, the table mapping GDB register
+ numbers to simulator register numbers, based on the values placed
+ in the ARCH->tdep->ppc_foo_regnum members. */
+static void
+init_sim_regno_table (struct gdbarch *arch)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (arch);
+ int total_regs = gdbarch_num_regs (arch) + gdbarch_num_pseudo_regs (arch);
+ const struct reg *regs = tdep->regs;
+ int *sim_regno = GDBARCH_OBSTACK_CALLOC (arch, total_regs, int);
+ int i;
+
+ /* Presume that all registers not explicitly mentioned below are
+ unavailable from the sim. */
+ for (i = 0; i < total_regs; i++)
+ sim_regno[i] = -1;
+
+ /* General-purpose registers. */
+ for (i = 0; i < ppc_num_gprs; i++)
+ set_sim_regno (sim_regno, tdep->ppc_gp0_regnum + i, sim_ppc_r0_regnum + i);
+
+ /* Floating-point registers. */
+ if (tdep->ppc_fp0_regnum >= 0)
+ for (i = 0; i < ppc_num_fprs; i++)
+ set_sim_regno (sim_regno,
+ tdep->ppc_fp0_regnum + i,
+ sim_ppc_f0_regnum + i);
+ if (tdep->ppc_fpscr_regnum >= 0)
+ set_sim_regno (sim_regno, tdep->ppc_fpscr_regnum, sim_ppc_fpscr_regnum);
+
+ set_sim_regno (sim_regno, gdbarch_pc_regnum (arch), sim_ppc_pc_regnum);
+ set_sim_regno (sim_regno, tdep->ppc_ps_regnum, sim_ppc_ps_regnum);
+ set_sim_regno (sim_regno, tdep->ppc_cr_regnum, sim_ppc_cr_regnum);
+
+ /* Segment registers. */
+ if (tdep->ppc_sr0_regnum >= 0)
+ for (i = 0; i < ppc_num_srs; i++)
+ set_sim_regno (sim_regno,
+ tdep->ppc_sr0_regnum + i,
+ sim_ppc_sr0_regnum + i);
+
+ /* Altivec registers. */
+ if (tdep->ppc_vr0_regnum >= 0)
+ {
+ for (i = 0; i < ppc_num_vrs; i++)
+ set_sim_regno (sim_regno,
+ tdep->ppc_vr0_regnum + i,
+ sim_ppc_vr0_regnum + i);
+
+ /* FIXME: jimb/2004-07-15: when we have tdep->ppc_vscr_regnum,
+ we can treat this more like the other cases. */
+ set_sim_regno (sim_regno,
+ tdep->ppc_vr0_regnum + ppc_num_vrs,
+ sim_ppc_vscr_regnum);
+ }
+ /* vsave is a special-purpose register, so the code below handles it. */
+
+ /* SPE APU (E500) registers. */
+ if (tdep->ppc_ev0_regnum >= 0)
+ for (i = 0; i < ppc_num_gprs; i++)
+ set_sim_regno (sim_regno,
+ tdep->ppc_ev0_regnum + i,
+ sim_ppc_ev0_regnum + i);
+ if (tdep->ppc_ev0_upper_regnum >= 0)
+ for (i = 0; i < ppc_num_gprs; i++)
+ set_sim_regno (sim_regno,
+ tdep->ppc_ev0_upper_regnum + i,
+ sim_ppc_rh0_regnum + i);
+ if (tdep->ppc_acc_regnum >= 0)
+ set_sim_regno (sim_regno, tdep->ppc_acc_regnum, sim_ppc_acc_regnum);
+ /* spefscr is a special-purpose register, so the code below handles it. */
+
+ /* Now handle all special-purpose registers. Verify that they
+ haven't mistakenly been assigned numbers by any of the above
+ code). */
+ for (i = 0; i < total_regs; i++)
+ if (regs[i].spr_num >= 0)
+ set_sim_regno (sim_regno, i, regs[i].spr_num + sim_ppc_spr0_regnum);
+
+ /* Drop the initialized array into place. */
+ tdep->sim_regno = sim_regno;
+}
+
+
+/* Given a GDB register number REG, return the corresponding SIM
+ register number. */
+static int
+rs6000_register_sim_regno (int reg)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ int sim_regno;
+
+ gdb_assert (0 <= reg && reg <= NUM_REGS + NUM_PSEUDO_REGS);
+ sim_regno = tdep->sim_regno[reg];
+
+ if (sim_regno >= 0)
+ return sim_regno;
+ else
+ return LEGACY_SIM_REGNO_IGNORE;
+}
+
\f
/* Register set support functions. */
continue;
}
- else if (lr_reg != -1 &&
+ else if (lr_reg >= 0 &&
/* std Rx, NUM(r1) || stdu Rx, NUM(r1) */
(((op & 0xffff0000) == (lr_reg | 0xf8010000)) ||
/* stw Rx, NUM(r1) */
{ /* where Rx == lr */
fdata->lr_offset = offset;
fdata->nosavedpc = 0;
- lr_reg = 0;
+ /* Invalidate lr_reg, but don't set it to -1.
+ That would mean that it had never been set. */
+ lr_reg = -2;
if ((op & 0xfc000003) == 0xf8000000 || /* std */
(op & 0xfc000000) == 0x90000000) /* stw */
{
continue;
}
- else if (cr_reg != -1 &&
+ else if (cr_reg >= 0 &&
/* std Rx, NUM(r1) || stdu Rx, NUM(r1) */
(((op & 0xffff0000) == (cr_reg | 0xf8010000)) ||
/* stw Rx, NUM(r1) */
((op & 0xffff0000) == (cr_reg | 0x94010000))))
{ /* where Rx == cr */
fdata->cr_offset = offset;
- cr_reg = 0;
+ /* Invalidate cr_reg, but don't set it to -1.
+ That would mean that it had never been set. */
+ cr_reg = -2;
if ((op & 0xfc000003) == 0xf8000000 ||
(op & 0xfc000000) == 0x90000000)
{
fdata->frameless = 0;
/* Don't skip over the subroutine call if it is not within
- the first three instructions of the prologue. */
+ the first three instructions of the prologue and either
+ we have no line table information or the line info tells
+ us that the subroutine call is not part of the line
+ associated with the prologue. */
if ((pc - orig_pc) > 8)
- break;
+ {
+ struct symtab_and_line prologue_sal = find_pc_line (orig_pc, 0);
+ struct symtab_and_line this_sal = find_pc_line (pc, 0);
+
+ if ((prologue_sal.line == 0) || (prologue_sal.line != this_sal.line))
+ break;
+ }
op = read_memory_integer (pc + 4, 4);
for (argno = 0, argbytes = 0; argno < nargs && ii < 8; ++ii)
{
- int reg_size = DEPRECATED_REGISTER_RAW_SIZE (ii + 3);
+ int reg_size = register_size (current_gdbarch, ii + 3);
arg = args[argno];
- type = check_typedef (VALUE_TYPE (arg));
+ type = check_typedef (value_type (arg));
len = TYPE_LENGTH (type);
if (TYPE_CODE (type) == TYPE_CODE_FLT)
There are 13 fpr's reserved for passing parameters. At this point
there is no way we would run out of them. */
- if (len > 8)
- printf_unfiltered ("Fatal Error: a floating point parameter "
- "#%d with a size > 8 is found!\n", argno);
+ gdb_assert (len <= 8);
- memcpy (&deprecated_registers[DEPRECATED_REGISTER_BYTE
- (tdep->ppc_fp0_regnum + 1 + f_argno)],
- VALUE_CONTENTS (arg),
- len);
+ regcache_cooked_write (regcache,
+ tdep->ppc_fp0_regnum + 1 + f_argno,
+ value_contents (arg));
++f_argno;
}
/* Argument takes more than one register. */
while (argbytes < len)
{
- memset (&deprecated_registers[DEPRECATED_REGISTER_BYTE (ii + 3)], 0,
- reg_size);
- memcpy (&deprecated_registers[DEPRECATED_REGISTER_BYTE (ii + 3)],
- ((char *) VALUE_CONTENTS (arg)) + argbytes,
+ char word[MAX_REGISTER_SIZE];
+ memset (word, 0, reg_size);
+ memcpy (word,
+ ((char *) value_contents (arg)) + argbytes,
(len - argbytes) > reg_size
? reg_size : len - argbytes);
+ regcache_cooked_write (regcache,
+ tdep->ppc_gp0_regnum + 3 + ii,
+ word);
++ii, argbytes += reg_size;
if (ii >= 8)
{
/* Argument can fit in one register. No problem. */
int adj = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? reg_size - len : 0;
- memset (&deprecated_registers[DEPRECATED_REGISTER_BYTE (ii + 3)], 0, reg_size);
- memcpy ((char *)&deprecated_registers[DEPRECATED_REGISTER_BYTE (ii + 3)] + adj,
- VALUE_CONTENTS (arg), len);
+ char word[MAX_REGISTER_SIZE];
+
+ memset (word, 0, reg_size);
+ memcpy (word, value_contents (arg), len);
+ regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 3 +ii, word);
}
++argno;
}
for (; jj < nargs; ++jj)
{
struct value *val = args[jj];
- space += ((TYPE_LENGTH (VALUE_TYPE (val))) + 3) & -4;
+ space += ((TYPE_LENGTH (value_type (val))) + 3) & -4;
}
/* Add location required for the rest of the parameters. */
if (argbytes)
{
write_memory (sp + 24 + (ii * 4),
- ((char *) VALUE_CONTENTS (arg)) + argbytes,
+ ((char *) value_contents (arg)) + argbytes,
len - argbytes);
++argno;
ii += ((len - argbytes + 3) & -4) / 4;
{
arg = args[argno];
- type = check_typedef (VALUE_TYPE (arg));
+ type = check_typedef (value_type (arg));
len = TYPE_LENGTH (type);
if (TYPE_CODE (type) == TYPE_CODE_FLT && f_argno < 13)
{
- if (len > 8)
- printf_unfiltered ("Fatal Error: a floating point parameter"
- " #%d with a size > 8 is found!\n", argno);
+ gdb_assert (len <= 8);
- memcpy (&(deprecated_registers
- [DEPRECATED_REGISTER_BYTE
- (tdep->ppc_fp0_regnum + 1 + f_argno)]),
- VALUE_CONTENTS (arg),
- len);
+ regcache_cooked_write (regcache,
+ tdep->ppc_fp0_regnum + 1 + f_argno,
+ value_contents (arg));
++f_argno;
}
write_memory (sp + 24 + (ii * 4),
- (char *) VALUE_CONTENTS (arg),
+ (char *) value_contents (arg),
len);
ii += ((len + 3) & -4) / 4;
}
{
/* return value is copied starting from r3. */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && TYPE_LENGTH (valtype) < DEPRECATED_REGISTER_RAW_SIZE (3))
- offset = DEPRECATED_REGISTER_RAW_SIZE (3) - TYPE_LENGTH (valtype);
+ && TYPE_LENGTH (valtype) < register_size (current_gdbarch, 3))
+ offset = register_size (current_gdbarch, 3) - TYPE_LENGTH (valtype);
memcpy (valbuf,
regbuf + DEPRECATED_REGISTER_BYTE (3) + offset,
back to where execution should continue.
GDB should silently step over @FIX code, just like AIX dbx does.
- Unfortunately, the linker uses the "b" instruction for the branches,
- meaning that the link register doesn't get set. Therefore, GDB's usual
- step_over_function() mechanism won't work.
+ Unfortunately, the linker uses the "b" instruction for the
+ branches, meaning that the link register doesn't get set.
+ Therefore, GDB's usual step_over_function () mechanism won't work.
- Instead, use the IN_SOLIB_RETURN_TRAMPOLINE and SKIP_TRAMPOLINE_CODE hooks
- in handle_inferior_event() to skip past @FIX code. */
+ Instead, use the IN_SOLIB_RETURN_TRAMPOLINE and
+ SKIP_TRAMPOLINE_CODE hooks in handle_inferior_event() to skip past
+ @FIX code. */
int
rs6000_in_solib_return_trampoline (CORE_ADDR pc, char *name)
/* Check for bigtoc fixup code. */
msymbol = lookup_minimal_symbol_by_pc (pc);
- if (msymbol && rs6000_in_solib_return_trampoline (pc, DEPRECATED_SYMBOL_NAME (msymbol)))
+ if (msymbol
+ && rs6000_in_solib_return_trampoline (pc,
+ DEPRECATED_SYMBOL_NAME (msymbol)))
{
/* Double-check that the third instruction from PC is relative "b". */
op = read_memory_integer (pc + 8, 4);
return builtin_type_vec128;
break;
default:
- internal_error (__FILE__, __LINE__, "Register %d size %d unknown",
+ internal_error (__FILE__, __LINE__, _("Register %d size %d unknown"),
n, size);
}
}
}
+/* Is REGNUM a member of REGGROUP? */
+static int
+rs6000_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
+ struct reggroup *group)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ int float_p;
+ int vector_p;
+ int general_p;
+
+ if (REGISTER_NAME (regnum) == NULL
+ || *REGISTER_NAME (regnum) == '\0')
+ return 0;
+ if (group == all_reggroup)
+ return 1;
+
+ float_p = (regnum == tdep->ppc_fpscr_regnum
+ || (regnum >= tdep->ppc_fp0_regnum
+ && regnum < tdep->ppc_fp0_regnum + 32));
+ if (group == float_reggroup)
+ return float_p;
+
+ vector_p = ((regnum >= tdep->ppc_vr0_regnum
+ && regnum < tdep->ppc_vr0_regnum + 32)
+ || (regnum >= tdep->ppc_ev0_regnum
+ && regnum < tdep->ppc_ev0_regnum + 32)
+ || regnum == tdep->ppc_vrsave_regnum
+ || regnum == tdep->ppc_acc_regnum
+ || regnum == tdep->ppc_spefscr_regnum);
+ if (group == vector_reggroup)
+ return vector_p;
+
+ /* Note that PS aka MSR isn't included - it's a system register (and
+ besides, due to GCC's CFI foobar you do not want to restore
+ it). */
+ general_p = ((regnum >= tdep->ppc_gp0_regnum
+ && regnum < tdep->ppc_gp0_regnum + 32)
+ || regnum == tdep->ppc_toc_regnum
+ || regnum == tdep->ppc_cr_regnum
+ || regnum == tdep->ppc_lr_regnum
+ || regnum == tdep->ppc_ctr_regnum
+ || regnum == tdep->ppc_xer_regnum
+ || regnum == PC_REGNUM);
+ if (group == general_reggroup)
+ return general_p;
+
+ if (group == save_reggroup || group == restore_reggroup)
+ return general_p || vector_p || float_p;
+
+ return 0;
+}
+
/* The register format for RS/6000 floating point registers is always
double, we need a conversion if the memory format is float. */
put_frame_register (frame, regnum, to);
}
+/* Move SPE vector register values between a 64-bit buffer and the two
+ 32-bit raw register halves in a regcache. This function handles
+ both splitting a 64-bit value into two 32-bit halves, and joining
+ two halves into a whole 64-bit value, depending on the function
+ passed as the MOVE argument.
+
+ EV_REG must be the number of an SPE evN vector register --- a
+ pseudoregister. REGCACHE must be a regcache, and BUFFER must be a
+ 64-bit buffer.
+
+ Call MOVE once for each 32-bit half of that register, passing
+ REGCACHE, the number of the raw register corresponding to that
+ half, and the address of the appropriate half of BUFFER.
+
+ For example, passing 'regcache_raw_read' as the MOVE function will
+ fill BUFFER with the full 64-bit contents of EV_REG. Or, passing
+ 'regcache_raw_supply' will supply the contents of BUFFER to the
+ appropriate pair of raw registers in REGCACHE.
+
+ You may need to cast away some 'const' qualifiers when passing
+ MOVE, since this function can't tell at compile-time which of
+ REGCACHE or BUFFER is acting as the source of the data. If C had
+ co-variant type qualifiers, ... */
+static void
+e500_move_ev_register (void (*move) (struct regcache *regcache,
+ int regnum, void *buf),
+ struct regcache *regcache, int ev_reg,
+ void *buffer)
+{
+ struct gdbarch *arch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (arch);
+ int reg_index;
+ char *byte_buffer = buffer;
+
+ gdb_assert (tdep->ppc_ev0_regnum <= ev_reg
+ && ev_reg < tdep->ppc_ev0_regnum + ppc_num_gprs);
+
+ reg_index = ev_reg - tdep->ppc_ev0_regnum;
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ move (regcache, tdep->ppc_ev0_upper_regnum + reg_index, byte_buffer);
+ move (regcache, tdep->ppc_gp0_regnum + reg_index, byte_buffer + 4);
+ }
+ else
+ {
+ move (regcache, tdep->ppc_gp0_regnum + reg_index, byte_buffer);
+ move (regcache, tdep->ppc_ev0_upper_regnum + reg_index, byte_buffer + 4);
+ }
+}
+
static void
e500_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, void *buffer)
{
- int base_regnum;
- int offset = 0;
- char temp_buffer[MAX_REGISTER_SIZE];
+ struct gdbarch *regcache_arch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- if (reg_nr >= tdep->ppc_gp0_regnum
- && reg_nr < tdep->ppc_gp0_regnum + ppc_num_gprs)
- {
- base_regnum = reg_nr - tdep->ppc_gp0_regnum + tdep->ppc_ev0_regnum;
-
- /* Build the value in the provided buffer. */
- /* Read the raw register of which this one is the lower portion. */
- regcache_raw_read (regcache, base_regnum, temp_buffer);
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- offset = 4;
- memcpy ((char *) buffer, temp_buffer + offset, 4);
- }
+ gdb_assert (regcache_arch == gdbarch);
+
+ if (tdep->ppc_ev0_regnum <= reg_nr
+ && reg_nr < tdep->ppc_ev0_regnum + ppc_num_gprs)
+ e500_move_ev_register (regcache_raw_read, regcache, reg_nr, buffer);
+ else
+ internal_error (__FILE__, __LINE__,
+ _("e500_pseudo_register_read: "
+ "called on unexpected register '%s' (%d)"),
+ gdbarch_register_name (gdbarch, reg_nr), reg_nr);
}
static void
e500_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, const void *buffer)
{
- int base_regnum;
- int offset = 0;
- char temp_buffer[MAX_REGISTER_SIZE];
+ struct gdbarch *regcache_arch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- if (reg_nr >= tdep->ppc_gp0_regnum
- && reg_nr < tdep->ppc_gp0_regnum + ppc_num_gprs)
- {
- base_regnum = reg_nr - tdep->ppc_gp0_regnum + tdep->ppc_ev0_regnum;
- /* reg_nr is 32 bit here, and base_regnum is 64 bits. */
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- offset = 4;
-
- /* Let's read the value of the base register into a temporary
- buffer, so that overwriting the last four bytes with the new
- value of the pseudo will leave the upper 4 bytes unchanged. */
- regcache_raw_read (regcache, base_regnum, temp_buffer);
-
- /* Write as an 8 byte quantity. */
- memcpy (temp_buffer + offset, (char *) buffer, 4);
- regcache_raw_write (regcache, base_regnum, temp_buffer);
- }
+ gdb_assert (regcache_arch == gdbarch);
+
+ if (tdep->ppc_ev0_regnum <= reg_nr
+ && reg_nr < tdep->ppc_ev0_regnum + ppc_num_gprs)
+ e500_move_ev_register ((void (*) (struct regcache *, int, void *))
+ regcache_raw_write,
+ regcache, reg_nr, (void *) buffer);
+ else
+ internal_error (__FILE__, __LINE__,
+ _("e500_pseudo_register_read: "
+ "called on unexpected register '%s' (%d)"),
+ gdbarch_register_name (gdbarch, reg_nr), reg_nr);
+}
+
+/* The E500 needs a custom reggroup function: it has anonymous raw
+ registers, and default_register_reggroup_p assumes that anonymous
+ registers are not members of any reggroup. */
+static int
+e500_register_reggroup_p (struct gdbarch *gdbarch,
+ int regnum,
+ struct reggroup *group)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ /* The save and restore register groups need to include the
+ upper-half registers, even though they're anonymous. */
+ if ((group == save_reggroup
+ || group == restore_reggroup)
+ && (tdep->ppc_ev0_upper_regnum <= regnum
+ && regnum < tdep->ppc_ev0_upper_regnum + ppc_num_gprs))
+ return 1;
+
+ /* In all other regards, the default reggroup definition is fine. */
+ return default_register_reggroup_p (gdbarch, regnum, group);
}
/* Convert a DBX STABS register number to a GDB register number. */
&& TYPE_VECTOR (type))
regnum = tdep->ppc_vr0_regnum + 2;
else
- gdb_assert (0);
+ internal_error (__FILE__, __LINE__,
+ _("rs6000_store_return_value: "
+ "unexpected array return type"));
}
else
/* Everything else is returned in GPR3 and up. */
/* Return a struct reg defining floating-point register NAME. */
#define F(name) { STR(name), 8, 8, 1, 0, -1 }
-/* Return a struct reg defining a pseudo register NAME. */
-#define P(name) { STR(name), 4, 8, 0, 1, -1 }
+/* Return a struct reg defining a pseudo register NAME that is 64 bits
+ long on all systems. */
+#define P8(name) { STR(name), 8, 8, 0, 1, -1 }
/* Return a struct reg defining register NAME that's 32 bits on 32-bit
systems and that doesn't exist on 64-bit systems. */
/* Return a struct reg placeholder for a register that doesn't exist. */
#define R0 { 0, 0, 0, 0, 0, -1 }
+/* Return a struct reg defining an anonymous raw register that's 32
+ bits on all systems. */
+#define A4 { 0, 4, 4, 0, 0, -1 }
+
/* Return a struct reg defining an SPR named NAME that is 32 bits on
32-bit systems and 64 bits on 64-bit systems. */
#define S(name) { STR(name), 4, 8, 0, 0, ppc_spr_ ## name }
/*143*/R16(vr24),R16(vr25),R16(vr26),R16(vr27),R16(vr28),R16(vr29),R16(vr30),R16(vr31), \
/*151*/R4(vscr), R4(vrsave)
-/* Vectors of hi-lo general purpose registers. */
-#define PPC_EV_REGS \
- /* 0*/R8(ev0), R8(ev1), R8(ev2), R8(ev3), R8(ev4), R8(ev5), R8(ev6), R8(ev7), \
- /* 8*/R8(ev8), R8(ev9), R8(ev10),R8(ev11),R8(ev12),R8(ev13),R8(ev14),R8(ev15), \
- /*16*/R8(ev16),R8(ev17),R8(ev18),R8(ev19),R8(ev20),R8(ev21),R8(ev22),R8(ev23), \
- /*24*/R8(ev24),R8(ev25),R8(ev26),R8(ev27),R8(ev28),R8(ev29),R8(ev30),R8(ev31)
-/* Lower half of the EV registers. */
-#define PPC_GPRS_PSEUDO_REGS \
- /* 0 */ P(r0), P(r1), P(r2), P(r3), P(r4), P(r5), P(r6), P(r7), \
- /* 8 */ P(r8), P(r9), P(r10),P(r11),P(r12),P(r13),P(r14),P(r15), \
- /* 16 */ P(r16),P(r17),P(r18),P(r19),P(r20),P(r21),P(r22),P(r23), \
- /* 24 */ P(r24),P(r25),P(r26),P(r27),P(r28),P(r29),P(r30),P(r31)
+/* On machines supporting the SPE APU, the general-purpose registers
+ are 64 bits long. There are SIMD vector instructions to treat them
+ as pairs of floats, but the rest of the instruction set treats them
+ as 32-bit registers, and only operates on their lower halves.
+
+ In the GDB regcache, we treat their high and low halves as separate
+ registers. The low halves we present as the general-purpose
+ registers, and then we have pseudo-registers that stitch together
+ the upper and lower halves and present them as pseudo-registers. */
+
+/* SPE GPR lower halves --- raw registers. */
+#define PPC_SPE_GP_REGS \
+ /* 0 */ R4(r0), R4(r1), R4(r2), R4(r3), R4(r4), R4(r5), R4(r6), R4(r7), \
+ /* 8 */ R4(r8), R4(r9), R4(r10),R4(r11),R4(r12),R4(r13),R4(r14),R4(r15), \
+ /* 16 */ R4(r16),R4(r17),R4(r18),R4(r19),R4(r20),R4(r21),R4(r22),R4(r23), \
+ /* 24 */ R4(r24),R4(r25),R4(r26),R4(r27),R4(r28),R4(r29),R4(r30),R4(r31)
+
+/* SPE GPR upper halves --- anonymous raw registers. */
+#define PPC_SPE_UPPER_GP_REGS \
+ /* 0 */ A4, A4, A4, A4, A4, A4, A4, A4, \
+ /* 8 */ A4, A4, A4, A4, A4, A4, A4, A4, \
+ /* 16 */ A4, A4, A4, A4, A4, A4, A4, A4, \
+ /* 24 */ A4, A4, A4, A4, A4, A4, A4, A4
+
+/* SPE GPR vector registers --- pseudo registers based on underlying
+ gprs and the anonymous upper half raw registers. */
+#define PPC_EV_PSEUDO_REGS \
+/* 0*/P8(ev0), P8(ev1), P8(ev2), P8(ev3), P8(ev4), P8(ev5), P8(ev6), P8(ev7), \
+/* 8*/P8(ev8), P8(ev9), P8(ev10),P8(ev11),P8(ev12),P8(ev13),P8(ev14),P8(ev15),\
+/*16*/P8(ev16),P8(ev17),P8(ev18),P8(ev19),P8(ev20),P8(ev21),P8(ev22),P8(ev23),\
+/*24*/P8(ev24),P8(ev25),P8(ev26),P8(ev27),P8(ev28),P8(ev29),P8(ev30),P8(ev31)
/* IBM POWER (pre-PowerPC) architecture, user-level view. We only cover
user-level SPR's. */
/* Motorola e500. */
static const struct reg registers_e500[] =
{
- R(pc), R(ps),
- /* cr, lr, ctr, xer, "" */
- PPC_UISA_NOFP_SPRS,
- /* 7...38 */
- PPC_EV_REGS,
- R8(acc), S4(spefscr),
+ /* 0 .. 31 */ PPC_SPE_GP_REGS,
+ /* 32 .. 63 */ PPC_SPE_UPPER_GP_REGS,
+ /* 64 .. 65 */ R(pc), R(ps),
+ /* 66 .. 70 */ PPC_UISA_NOFP_SPRS,
+ /* 71 .. 72 */ R8(acc), S4(spefscr),
/* NOTE: Add new registers here the end of the raw register
list and just before the first pseudo register. */
- /* 41...72 */
- PPC_GPRS_PSEUDO_REGS
+ /* 73 .. 104 */ PPC_EV_PSEUDO_REGS
};
/* Information about a particular processor variant. */
{
struct rs6000_frame_cache *info = rs6000_frame_cache (next_frame,
this_cache);
- trad_frame_prev_register (next_frame, info->saved_regs, regnum,
- optimizedp, lvalp, addrp, realnump, valuep);
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
}
static const struct frame_unwind rs6000_frame_unwind =
tdep->regs = v->regs;
tdep->ppc_gp0_regnum = 0;
- tdep->ppc_gprs_pseudo_p = 0;
tdep->ppc_toc_regnum = 2;
tdep->ppc_ps_regnum = 65;
tdep->ppc_cr_regnum = 66;
tdep->ppc_sr0_regnum = 71;
tdep->ppc_vr0_regnum = -1;
tdep->ppc_vrsave_regnum = -1;
+ tdep->ppc_ev0_upper_regnum = -1;
tdep->ppc_ev0_regnum = -1;
tdep->ppc_ev31_regnum = -1;
tdep->ppc_acc_regnum = -1;
set_gdbarch_pc_regnum (gdbarch, 64);
set_gdbarch_sp_regnum (gdbarch, 1);
set_gdbarch_deprecated_fp_regnum (gdbarch, 1);
+ set_gdbarch_register_sim_regno (gdbarch, rs6000_register_sim_regno);
if (sysv_abi && wordsize == 8)
set_gdbarch_return_value (gdbarch, ppc64_sysv_abi_return_value);
else if (sysv_abi && wordsize == 4)
switch (v->mach)
{
case bfd_mach_ppc:
+ tdep->ppc_sr0_regnum = -1;
tdep->ppc_vr0_regnum = 71;
tdep->ppc_vrsave_regnum = 104;
break;
tdep->ppc_vrsave_regnum = 152;
break;
case bfd_mach_ppc_e500:
- tdep->ppc_gp0_regnum = 41;
- tdep->ppc_gprs_pseudo_p = 1;
tdep->ppc_toc_regnum = -1;
- tdep->ppc_ps_regnum = 1;
- tdep->ppc_cr_regnum = 2;
- tdep->ppc_lr_regnum = 3;
- tdep->ppc_ctr_regnum = 4;
- tdep->ppc_xer_regnum = 5;
- tdep->ppc_ev0_regnum = 7;
- tdep->ppc_ev31_regnum = 38;
+ tdep->ppc_ev0_upper_regnum = 32;
+ tdep->ppc_ev0_regnum = 73;
+ tdep->ppc_ev31_regnum = 104;
+ tdep->ppc_acc_regnum = 71;
+ tdep->ppc_spefscr_regnum = 72;
tdep->ppc_fp0_regnum = -1;
tdep->ppc_fpscr_regnum = -1;
tdep->ppc_sr0_regnum = -1;
- tdep->ppc_acc_regnum = 39;
- tdep->ppc_spefscr_regnum = 40;
- set_gdbarch_pc_regnum (gdbarch, 0);
- set_gdbarch_sp_regnum (gdbarch, tdep->ppc_gp0_regnum + 1);
- set_gdbarch_deprecated_fp_regnum (gdbarch, tdep->ppc_gp0_regnum + 1);
set_gdbarch_pseudo_register_read (gdbarch, e500_pseudo_register_read);
set_gdbarch_pseudo_register_write (gdbarch, e500_pseudo_register_write);
+ set_gdbarch_register_reggroup_p (gdbarch, e500_register_reggroup_p);
break;
case bfd_mach_ppc64:
}
else
internal_error (__FILE__, __LINE__,
- "rs6000_gdbarch_init: "
- "received unexpected BFD 'arch' value");
+ _("rs6000_gdbarch_init: "
+ "received unexpected BFD 'arch' value"));
/* Sanity check on registers. */
gdb_assert (strcmp (tdep->regs[tdep->ppc_gp0_regnum].name, "r0") == 0);
set_gdbarch_num_pseudo_regs (gdbarch, v->npregs);
set_gdbarch_register_name (gdbarch, rs6000_register_name);
set_gdbarch_register_type (gdbarch, rs6000_register_type);
+ set_gdbarch_register_reggroup_p (gdbarch, rs6000_register_reggroup_p);
set_gdbarch_ptr_bit (gdbarch, wordsize * TARGET_CHAR_BIT);
set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT);
set_gdbarch_software_single_step (gdbarch, rs6000_software_single_step);
}
+ init_sim_regno_table (gdbarch);
+
return gdbarch;
}
/* Add root prefix command for "info powerpc" commands */
add_prefix_cmd ("powerpc", class_info, rs6000_info_powerpc_command,
- "Various POWERPC info specific commands.",
+ _("Various POWERPC info specific commands."),
&info_powerpc_cmdlist, "info powerpc ", 0, &infolist);
}
projects / deliverable / binutils-gdb.git / blobdiff