#include "objfiles.h"
#include "xcoffsolib.h"
-extern struct obstack frame_cache_obstack;
-
extern int errno;
-/* Nonzero if we just simulated a single step break. */
-int one_stepped;
-
/* Breakpoint shadows for the single step instructions will be kept here. */
static struct sstep_breaks {
static CORE_ADDR branch_dest PARAMS ((int opcode, int instr, CORE_ADDR pc,
CORE_ADDR safety));
-static void frame_get_cache_fsr PARAMS ((struct frame_info *fi,
- struct rs6000_framedata *fdatap));
+static void frame_get_saved_regs PARAMS ((struct frame_info *fi,
+ struct rs6000_framedata *fdatap));
static void pop_dummy_frame PARAMS ((void));
+static CORE_ADDR frame_initial_stack_address PARAMS ((struct frame_info *));
+
+/* Fill in fi->saved_regs */
+
+struct frame_extra_info
+{
+ /* Functions calling alloca() change the value of the stack
+ pointer. We need to use initial stack pointer (which is saved in
+ r31 by gcc) in such cases. If a compiler emits traceback table,
+ then we should use the alloca register specified in traceback
+ table. FIXME. */
+ CORE_ADDR initial_sp; /* initial stack pointer. */ \
+};
+
+void
+rs6000_init_extra_frame_info (fromleaf, fi)
+ int fromleaf;
+ struct frame_info *fi;
+{
+ fi->extra_info = (struct frame_extra_info*)
+ frame_obstack_alloc (sizeof (struct frame_extra_info));
+ fi->extra_info->initial_sp = 0;
+ if (fi->next != (CORE_ADDR) 0
+ && fi->pc < TEXT_SEGMENT_BASE)
+ /* We're in get_prev_frame_info */
+ /* and this is a special signal frame. */
+ /* (fi->pc will be some low address in the kernel, */
+ /* to which the signal handler returns). */
+ fi->signal_handler_caller = 1;
+}
+
+
+void
+rs6000_frame_init_saved_regs (fi)
+ struct frame_info *fi;
+{
+ frame_get_saved_regs (fi, NULL);
+}
+
+CORE_ADDR
+rs6000_frame_args_address (fi)
+ struct frame_info *fi;
+{
+ if (fi->extra_info->initial_sp != 0)
+ return fi->extra_info->initial_sp;
+ else
+ return frame_initial_stack_address (fi);
+}
+
+
/* Calculate the destination of a branch/jump. Return -1 if not a branch. */
static CORE_ADDR
}
+/* Sequence of bytes for breakpoint instruction. */
+
+#define BIG_BREAKPOINT { 0x7d, 0x82, 0x10, 0x08 }
+#define LITTLE_BREAKPOINT { 0x08, 0x10, 0x82, 0x7d }
+
+unsigned char *
+rs6000_breakpoint_from_pc (bp_addr, bp_size)
+ CORE_ADDR *bp_addr;
+ int *bp_size;
+{
+ static unsigned char big_breakpoint[] = BIG_BREAKPOINT;
+ static unsigned char little_breakpoint[] = LITTLE_BREAKPOINT;
+ *bp_size = 4;
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ return big_breakpoint;
+ else
+ return little_breakpoint;
+}
+
/* AIX does not support PT_STEP. Simulate it. */
void
-single_step (signal)
+rs6000_software_single_step (signal, insert_breakpoints_p)
enum target_signal signal;
+ int insert_breakpoints_p;
{
#define INSNLEN(OPCODE) 4
CORE_ADDR breaks[2];
int opcode;
- if (!one_stepped) {
+ if (insert_breakpoints_p) {
+
loc = read_pc ();
insn = read_memory_integer (loc, 4);
stepBreaks[ii].address = breaks[ii];
}
- one_stepped = 1;
} else {
/* remove step breakpoints. */
write_memory
(stepBreaks[ii].address, stepBreaks[ii].data, 4);
- one_stepped = 0;
}
errno = 0; /* FIXME, don't ignore errors! */
/* What errors? {read,write}_memory call error(). */
/* return pc value after skipping a function prologue and also return
information about a function frame.
- in struct rs6000_frameinfo fdata:
+ in struct rs6000_framedata fdata:
- frameless is TRUE, if function does not have a frame.
- nosavedpc is TRUE, if function does not save %pc value in its frame.
- - offset is the number of bytes used in the frame to save registers.
+ - offset is the initial size of this stack frame --- the amount by
+ which we decrement the sp to allocate the frame.
- saved_gpr is the number of the first saved gpr.
- saved_fpr is the number of the first saved fpr.
- alloca_reg is the number of the register used for alloca() handling.
Otherwise -1.
- - gpr_offset is the offset of the saved gprs
- - fpr_offset is the offset of the saved fprs
+ - gpr_offset is the offset of the first saved gpr from the previous frame.
+ - fpr_offset is the offset of the first saved fpr from the previous frame.
- lr_offset is the offset of the saved lr
- cr_offset is the offset of the saved cr
- */
+*/
#define SIGNED_SHORT(x) \
((sizeof (short) == 2) \
continue;
} else if (((op & 0xfc1f0000) == 0xbc010000) || /* stm Rx, NUM(r1) */
- ((op & 0xfc1f0000) == 0x90010000 && /* st rx,NUM(r1), rx >= r13 */
+ ((op & 0xfc1f0000) == 0x90010000 && /* st rx,NUM(r1),
+ rx >= r13 */
(op & 0x03e00000) >= 0x01a00000)) {
reg = GET_SRC_REG (op);
}
continue;
- } else if ((op & 0xffff0000) == 0x3c000000) { /* addis 0,0,NUM, used for >= 32k frames */
+ } else if ((op & 0xffff0000) == 0x3c000000) { /* addis 0,0,NUM, used
+ for >= 32k frames */
fdata->offset = (op & 0x0000ffff) << 16;
fdata->frameless = 0;
continue;
- } else if ((op & 0xffff0000) == 0x60000000) { /* ori 0,0,NUM, 2nd half of >= 32k frames */
+ } else if ((op & 0xffff0000) == 0x60000000) { /* ori 0,0,NUM, 2nd ha
+ lf of >= 32k frames */
fdata->offset |= (op & 0x0000ffff);
fdata->frameless = 0;
continue;
- } else if ((op & 0xffff0000) == lr_reg) { /* st Rx,NUM(r1) where Rx == lr */
+ } else if ((op & 0xffff0000) == lr_reg) { /* st Rx,NUM(r1)
+ where Rx == lr */
fdata->lr_offset = SIGNED_SHORT (op) + offset;
fdata->nosavedpc = 0;
lr_reg = 0;
continue;
- } else if ((op & 0xffff0000) == cr_reg) { /* st Rx,NUM(r1) where Rx == cr */
+ } else if ((op & 0xffff0000) == cr_reg) { /* st Rx,NUM(r1)
+ where Rx == cr */
fdata->cr_offset = SIGNED_SHORT (op) + offset;
cr_reg = 0;
continue;
- } else if (op == 0x48000005) { /* bl .+4 used in -mrelocatable */
+ } else if (op == 0x48000005) { /* bl .+4 used in
+ -mrelocatable */
continue;
} else if (op == 0x48000004) { /* b .+4 (xlc) */
break;
- } else if (((op & 0xffff0000) == 0x801e0000 || /* lwz 0,NUM(r30), used in V.4 -mrelocatable */
- op == 0x7fc0f214) && /* add r30,r0,r30, used in V.4 -mrelocatable */
+ } else if (((op & 0xffff0000) == 0x801e0000 || /* lwz 0,NUM(r30), used
+ in V.4 -mrelocatable */
+ op == 0x7fc0f214) && /* add r30,r0,r30, used
+ in V.4 -mrelocatable */
lr_reg == 0x901e0000) {
continue;
- } else if ((op & 0xffff0000) == 0x3fc00000 || /* addis 30,0,foo@ha, used in V.4 -mminimal-toc */
+ } else if ((op & 0xffff0000) == 0x3fc00000 || /* addis 30,0,foo@ha, used
+ in V.4 -mminimal-toc */
(op & 0xffff0000) == 0x3bde0000) { /* addi 30,30,foo@l */
continue;
- } else if ((op & 0xfc000000) == 0x48000000) { /* bl foo, to save fprs??? */
+ } else if ((op & 0xfc000000) == 0x48000000) { /* bl foo,
+ to save fprs??? */
fdata->frameless = 0;
/* Don't skip over the subroutine call if it is not within the first
prologue. */
if (op == 0x4def7b82 || op == 0) /* crorc 15, 15, 15 */
- break; /* don't skip over this branch */
-
+ break; /* don't skip over
+ this branch */
continue;
/* update stack pointer */
pc = read_register(PC_REGNUM);
store_address (pc_targ, 4, pc);
- (void) skip_prologue (get_pc_function_start (pc) + FUNCTION_START_OFFSET, &fdata);
+ skip_prologue (get_pc_function_start (pc), &fdata);
dummy_frame_addr [dummy_frame_count++] = sp;
for (ii=1; ii <= (LAST_SP_REGNUM-FIRST_SP_REGNUM+1); ++ii) {
write_memory (sp-384-(ii*4),
- ®isters[REGISTER_BYTE (FPLAST_REGNUM + ii)], 4);
+ ®isters[REGISTER_BYTE (FPLAST_REGNUM + ii)], 4);
}
/* Save sp or so called back chain right here. */
order to secure astack space. Thus, saved %sp (or %r1) value, is not the
one we should restore. Change it with the one we need. */
- *(int*)®isters [REGISTER_BYTE(FP_REGNUM)] = sp;
+ memcpy (®isters [REGISTER_BYTE(FP_REGNUM)], (char *) &sp, sizeof (int));
/* Now we can restore all registers. */
pc = read_pc ();
sp = FRAME_FP (frame);
- if (stop_stack_dummy && dummy_frame_count) {
- pop_dummy_frame ();
- return;
- }
+ if (stop_stack_dummy)
+ {
+#ifdef USE_GENERIC_DUMMY_FRAMES
+ generic_pop_dummy_frame ();
+ flush_cached_frames ();
+ return;
+#else
+ if (dummy_frame_count)
+ pop_dummy_frame ();
+ return;
+#endif
+ }
/* Make sure that all registers are valid. */
read_register_bytes (0, NULL, REGISTER_BYTES);
still in the link register, otherwise walk the frames and retrieve the
saved %pc value in the previous frame. */
- addr = get_pc_function_start (frame->pc) + FUNCTION_START_OFFSET;
+ addr = get_pc_function_start (frame->pc);
(void) skip_prologue (addr, &fdata);
if (fdata.frameless)
write_register (PC_REGNUM, lr);
/* reset register values if any was saved earlier. */
- addr = prev_sp - fdata.offset;
if (fdata.saved_gpr != -1)
- for (ii = fdata.saved_gpr; ii <= 31; ++ii) {
- read_memory (addr, ®isters [REGISTER_BYTE (ii)], 4);
- addr += 4;
+ {
+ addr = prev_sp + fdata.gpr_offset;
+ for (ii = fdata.saved_gpr; ii <= 31; ++ii) {
+ read_memory (addr, ®isters [REGISTER_BYTE (ii)], 4);
+ addr += 4;
+ }
}
if (fdata.saved_fpr != -1)
- for (ii = fdata.saved_fpr; ii <= 31; ++ii) {
- read_memory (addr, ®isters [REGISTER_BYTE (ii+FP0_REGNUM)], 8);
- addr += 8;
- }
+ {
+ addr = prev_sp + fdata.fpr_offset;
+ for (ii = fdata.saved_fpr; ii <= 31; ++ii) {
+ read_memory (addr, ®isters [REGISTER_BYTE (ii+FP0_REGNUM)], 8);
+ addr += 8;
+ }
+ }
write_register (SP_REGNUM, prev_sp);
target_store_registers (-1);
int argbytes; /* current argument byte */
char tmp_buffer [50];
int f_argno = 0; /* current floating point argno */
+
value_ptr arg = 0;
struct type *type;
CORE_ADDR saved_sp;
+#ifndef USE_GENERIC_DUMMY_FRAMES
if ( dummy_frame_count <= 0)
printf_unfiltered ("FATAL ERROR -push_arguments()! frame not found!!\n");
+#endif /* GENERIC_DUMMY_FRAMES */
/* The first eight words of ther arguments are passed in registers. Copy
them appropriately.
ii = struct_return ? 1 : 0;
+/*
+effectively indirect call... gcc does...
+
+return_val example( float, int);
+
+eabi:
+ float in fp0, int in r3
+ offset of stack on overflow 8/16
+ for varargs, must go by type.
+power open:
+ float in r3&r4, int in r5
+ offset of stack on overflow different
+both:
+ return in r3 or f0. If no float, must study how gcc emulates floats;
+ pay attention to arg promotion.
+ User may have to cast\args to handle promotion correctly
+ since gdb won't know if prototype supplied or not.
+*/
+
for (argno=0, argbytes=0; argno < nargs && ii<8; ++ii) {
arg = args[argno];
printf_unfiltered (
"Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno);
- memcpy (®isters[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)], VALUE_CONTENTS (arg),
- len);
+ memcpy (®isters[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)],
+ VALUE_CONTENTS (arg),
+ len);
++f_argno;
}
/* Argument takes more than one register. */
while (argbytes < len) {
-
- *(int*)®isters[REGISTER_BYTE(ii+3)] = 0;
+ memset (®isters[REGISTER_BYTE(ii+3)], 0, sizeof(int));
memcpy (®isters[REGISTER_BYTE(ii+3)],
- ((char*)VALUE_CONTENTS (arg))+argbytes,
- (len - argbytes) > 4 ? 4 : len - argbytes);
+ ((char*)VALUE_CONTENTS (arg))+argbytes,
+ (len - argbytes) > 4 ? 4 : len - argbytes);
++ii, argbytes += 4;
if (ii >= 8)
--ii;
}
else { /* Argument can fit in one register. No problem. */
- *(int*)®isters[REGISTER_BYTE(ii+3)] = 0;
+ memset (®isters[REGISTER_BYTE(ii+3)], 0, sizeof(int));
memcpy (®isters[REGISTER_BYTE(ii+3)], VALUE_CONTENTS (arg), len);
}
++argno;
ran_out_of_registers_for_arguments:
+#ifdef USE_GENERIC_DUMMY_FRAMES
+ saved_sp = read_sp ();
+#else
/* location for 8 parameters are always reserved. */
sp -= 4 * 8;
/* another six words for back chain, TOC register, link register, etc. */
sp -= 24;
-
+#endif /* GENERIC_DUMMY_FRAMES */
/* if there are more arguments, allocate space for them in
the stack, then push them starting from the ninth one. */
completely, push the rest of it into stack. */
if (argbytes) {
- write_memory (
- sp+24+(ii*4), ((char*)VALUE_CONTENTS (arg))+argbytes, len - argbytes);
+ write_memory (sp+24+(ii*4),
+ ((char*)VALUE_CONTENTS (arg))+argbytes,
+ len - argbytes);
++argno;
ii += ((len - argbytes + 3) & -4) / 4;
}
printf_unfiltered (
"Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno);
- memcpy (®isters[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)], VALUE_CONTENTS (arg),
- len);
+ memcpy (®isters[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)],
+ VALUE_CONTENTS (arg),
+ len);
++f_argno;
}
/* Secure stack areas first, before doing anything else. */
write_register (SP_REGNUM, sp);
+#ifndef USE_GENERIC_DUMMY_FRAMES
+/* we want to copy 24 bytes of target's frame to dummy's frame,
+ then set back chain to point to new frame. */
+
saved_sp = dummy_frame_addr [dummy_frame_count - 1];
read_memory (saved_sp, tmp_buffer, 24);
write_memory (sp, tmp_buffer, 24);
+#endif /* GENERIC_DUMMY_FRAMES */
/* set back chain properly */
store_address (tmp_buffer, 4, saved_sp);
target_store_registers (-1);
return sp;
}
+#ifdef ELF_OBJECT_FORMAT
+
+/* Function: ppc_push_return_address (pc, sp)
+ Set up the return address for the inferior function call. */
+
+CORE_ADDR
+ppc_push_return_address (pc, sp)
+ CORE_ADDR pc;
+ CORE_ADDR sp;
+{
+ write_register (LR_REGNUM, CALL_DUMMY_ADDRESS ());
+ return sp;
+}
+
+#endif
/* a given return value in `regbuf' with a type `valtype', extract and copy its
value into `valbuf' */
necessary. */
if (TYPE_LENGTH (valtype) > 4) /* this is a double */
- memcpy (valbuf, ®buf[REGISTER_BYTE (FP0_REGNUM + 1)],
- TYPE_LENGTH (valtype));
+ memcpy (valbuf,
+ ®buf[REGISTER_BYTE (FP0_REGNUM + 1)],
+ TYPE_LENGTH (valtype));
else { /* float */
memcpy (&dd, ®buf[REGISTER_BYTE (FP0_REGNUM + 1)], 8);
ff = (float)dd;
&& TYPE_LENGTH (valtype) < REGISTER_RAW_SIZE (3))
offset = REGISTER_RAW_SIZE (3) - TYPE_LENGTH (valtype);
- memcpy (valbuf, regbuf + REGISTER_BYTE (3) + offset,
+ memcpy (valbuf,
+ regbuf + REGISTER_BYTE (3) + offset,
TYPE_LENGTH (valtype));
}
}
return 0;
}
- func_start += FUNCTION_START_OFFSET;
(void) skip_prologue (func_start, &fdata);
return fdata.frameless;
}
if (fi->signal_handler_caller)
return read_memory_integer (fi->frame + SIG_FRAME_PC_OFFSET, 4);
- func_start = get_pc_function_start (fi->pc) + FUNCTION_START_OFFSET;
+#ifdef USE_GENERIC_DUMMY_FRAMES
+ if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+ return generic_read_register_dummy(fi->pc, fi->frame, PC_REGNUM);
+#endif /* GENERIC_DUMMY_FRAMES */
+
+ func_start = get_pc_function_start (fi->pc);
/* If we failed to find the start of the function, it is a mistake
to inspect the instructions. */
in which case the framedata are read. */
static void
-frame_get_cache_fsr (fi, fdatap)
+frame_get_saved_regs (fi, fdatap)
struct frame_info *fi;
struct rs6000_framedata *fdatap;
{
CORE_ADDR frame_addr;
struct rs6000_framedata work_fdata;
- if (fi->cache_fsr)
+ if (fi->saved_regs)
return;
- if (fdatap == NULL) {
- fdatap = &work_fdata;
- (void) skip_prologue (get_pc_function_start (fi->pc), fdatap);
- }
+ if (fdatap == NULL)
+ {
+ fdatap = &work_fdata;
+ (void) skip_prologue (get_pc_function_start (fi->pc), fdatap);
+ }
+
+ frame_saved_regs_zalloc (fi);
- fi->cache_fsr = (struct frame_saved_regs *)
- obstack_alloc (&frame_cache_obstack, sizeof (struct frame_saved_regs));
- memset (fi->cache_fsr, '\0', sizeof (struct frame_saved_regs));
+ /* If there were any saved registers, figure out parent's stack
+ pointer. */
+ /* The following is true only if the frame doesn't have a call to
+ alloca(), FIXME. */
- if (fi->prev && fi->prev->frame)
+ if (fdatap->saved_fpr == 0 && fdatap->saved_gpr == 0
+ && fdatap->lr_offset == 0 && fdatap->cr_offset == 0)
+ frame_addr = 0;
+ else if (fi->prev && fi->prev->frame)
frame_addr = fi->prev->frame;
else
frame_addr = read_memory_integer (fi->frame, 4);
/* if != -1, fdatap->saved_fpr is the smallest number of saved_fpr.
All fpr's from saved_fpr to fp31 are saved. */
- if (fdatap->saved_fpr >= 0) {
- int fpr_offset = frame_addr + fdatap->fpr_offset;
- for (ii = fdatap->saved_fpr; ii < 32; ii++) {
- fi->cache_fsr->regs [FP0_REGNUM + ii] = fpr_offset;
- fpr_offset += 8;
+ if (fdatap->saved_fpr >= 0)
+ {
+ int i;
+ int fpr_offset = frame_addr + fdatap->fpr_offset;
+ for (i = fdatap->saved_fpr; i < 32; i++)
+ {
+ fi->saved_regs [FP0_REGNUM + i] = fpr_offset;
+ fpr_offset += 8;
+ }
}
- }
/* if != -1, fdatap->saved_gpr is the smallest number of saved_gpr.
All gpr's from saved_gpr to gpr31 are saved. */
-
- if (fdatap->saved_gpr >= 0) {
- int gpr_offset = frame_addr + fdatap->gpr_offset;
- for (ii = fdatap->saved_gpr; ii < 32; ii++) {
- fi->cache_fsr->regs [ii] = gpr_offset;
- gpr_offset += 4;
+
+ if (fdatap->saved_gpr >= 0)
+ {
+ int i;
+ int gpr_offset = frame_addr + fdatap->gpr_offset;
+ for (i = fdatap->saved_gpr; i < 32; i++)
+ {
+ fi->saved_regs [i] = gpr_offset;
+ gpr_offset += 4;
+ }
}
- }
/* If != 0, fdatap->cr_offset is the offset from the frame that holds
the CR. */
if (fdatap->cr_offset != 0)
- fi->cache_fsr->regs [CR_REGNUM] = frame_addr + fdatap->cr_offset;
+ fi->saved_regs [CR_REGNUM] = frame_addr + fdatap->cr_offset;
/* If != 0, fdatap->lr_offset is the offset from the frame that holds
the LR. */
if (fdatap->lr_offset != 0)
- fi->cache_fsr->regs [LR_REGNUM] = frame_addr + fdatap->lr_offset;
+ fi->saved_regs [LR_REGNUM] = frame_addr + fdatap->lr_offset;
}
/* Return the address of a frame. This is the inital %sp value when the frame
was first allocated. For functions calling alloca(), it might be saved in
an alloca register. */
-CORE_ADDR
+static CORE_ADDR
frame_initial_stack_address (fi)
struct frame_info *fi;
{
/* if the initial stack pointer (frame address) of this frame is known,
just return it. */
- if (fi->initial_sp)
- return fi->initial_sp;
+ if (fi->extra_info->initial_sp)
+ return fi->extra_info->initial_sp;
/* find out if this function is using an alloca register.. */
/* if saved registers of this frame are not known yet, read and cache them. */
- if (!fi->cache_fsr)
- frame_get_cache_fsr (fi, &fdata);
+ if (!fi->saved_regs)
+ frame_get_saved_regs (fi, &fdata);
/* If no alloca register used, then fi->frame is the value of the %sp for
this frame, and it is good enough. */
- if (fdata.alloca_reg < 0) {
- fi->initial_sp = fi->frame;
- return fi->initial_sp;
- }
+ if (fdata.alloca_reg < 0)
+ {
+ fi->extra_info->initial_sp = fi->frame;
+ return fi->extra_info->initial_sp;
+ }
/* This function has an alloca register. If this is the top-most frame
(with the lowest address), the value in alloca register is good. */
if (!fi->next)
- return fi->initial_sp = read_register (fdata.alloca_reg);
+ return fi->extra_info->initial_sp = read_register (fdata.alloca_reg);
/* Otherwise, this is a caller frame. Callee has usually already saved
registers, but there are exceptions (such as when the callee
for (callee_fi = fi->next; callee_fi; callee_fi = callee_fi->next) {
- if (!callee_fi->cache_fsr)
- frame_get_cache_fsr (callee_fi, NULL);
+ if (!callee_fi->saved_regs)
+ frame_get_saved_regs (callee_fi, NULL);
/* this is the address in which alloca register is saved. */
- tmpaddr = callee_fi->cache_fsr->regs [fdata.alloca_reg];
+ tmpaddr = callee_fi->saved_regs [fdata.alloca_reg];
if (tmpaddr) {
- fi->initial_sp = read_memory_integer (tmpaddr, 4);
- return fi->initial_sp;
+ fi->extra_info->initial_sp = read_memory_integer (tmpaddr, 4);
+ return fi->extra_info->initial_sp;
}
/* Go look into deeper levels of the frame chain to see if any one of
/* If alloca register was not saved, by the callee (or any of its callees)
then the value in the register is still good. */
- return fi->initial_sp = read_register (fdata.alloca_reg);
+ fi->extra_info->initial_sp = read_register (fdata.alloca_reg);
+ return fi->extra_info->initial_sp;
}
CORE_ADDR
struct frame_info *thisframe;
{
CORE_ADDR fp;
- if (inside_entry_file ((thisframe)->pc))
+
+#ifdef USE_GENERIC_DUMMY_FRAMES
+ if (PC_IN_CALL_DUMMY (thisframe->pc, thisframe->frame, thisframe->frame))
+ return thisframe->frame; /* dummy frame same as caller's frame */
+#endif /* GENERIC_DUMMY_FRAMES */
+
+ if (inside_entry_file (thisframe->pc) ||
+ thisframe->pc == entry_point_address ())
return 0;
+
if (thisframe->signal_handler_caller)
fp = read_memory_integer (thisframe->frame + SIG_FRAME_FP_OFFSET, 4);
else if (thisframe->next != NULL
else
fp = read_memory_integer ((thisframe)->frame, 4);
+#ifdef USE_GENERIC_DUMMY_FRAMES
+ {
+ CORE_ADDR fpp, lr;
+
+ lr = read_register (LR_REGNUM);
+ if (lr == entry_point_address ())
+ if (fp != 0 && (fpp = read_memory_integer (fp, 4)) != 0)
+ if (PC_IN_CALL_DUMMY (lr, fpp, fpp))
+ return fpp;
+ }
+#endif /* GENERIC_DUMMY_FRAMES */
return fp;
}
\f
}
#endif
+/* Function: get_saved_register
+ Just call the generic_get_saved_register function. */
+
+#ifdef USE_GENERIC_DUMMY_FRAMES
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+ char *raw_buffer;
+ int *optimized;
+ CORE_ADDR *addrp;
+ struct frame_info *frame;
+ int regnum;
+ enum lval_type *lval;
+{
+ generic_get_saved_register (raw_buffer, optimized, addrp,
+ frame, regnum, lval);
+}
+#endif
+
+
void
_initialize_rs6000_tdep ()
{