/* Target-dependent code for GDB, the GNU debugger.
- Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "frame.h"
#include "inferior.h"
#include "symtab.h"
#include "target.h"
+#include "gdbcore.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "xcoffsolib.h"
-#include <sys/param.h>
-#include <sys/dir.h>
-#include <sys/user.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#include <fcntl.h>
-
-#include <sys/ptrace.h>
-#include <sys/reg.h>
-
-#include <a.out.h>
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/core.h>
+extern struct obstack frame_cache_obstack;
extern int errno;
-extern int attach_flag;
/* Nonzero if we just simulated a single step break. */
int one_stepped;
-
/* Breakpoint shadows for the single step instructions will be kept here. */
static struct sstep_breaks {
- int address;
- int data;
+ /* Address, or 0 if this is not in use. */
+ CORE_ADDR address;
+ /* Shadow contents. */
+ char data[4];
} stepBreaks[2];
+/* Static function prototypes */
-/*
- * Calculate the destination of a branch/jump. Return -1 if not a branch.
- */
-static int
+static CORE_ADDR find_toc_address PARAMS ((CORE_ADDR pc));
+
+static CORE_ADDR branch_dest PARAMS ((int opcode, int instr, CORE_ADDR pc,
+ CORE_ADDR safety));
+
+static void frame_get_cache_fsr PARAMS ((struct frame_info *fi,
+ struct rs6000_framedata *fdatap));
+
+static void pop_dummy_frame PARAMS ((void));
+
+/* Calculate the destination of a branch/jump. Return -1 if not a branch. */
+
+static CORE_ADDR
branch_dest (opcode, instr, pc, safety)
- int opcode, instr, pc, safety;
+ int opcode;
+ int instr;
+ CORE_ADDR pc;
+ CORE_ADDR safety;
{
- register long offset;
- unsigned dest;
+ CORE_ADDR dest;
int immediate;
int absolute;
int ext_op;
switch (opcode) {
case 18 :
- immediate = ((instr & ~3) << 6) >> 6; /* br unconditionl */
+ immediate = ((instr & ~3) << 6) >> 6; /* br unconditional */
+ if (absolute)
+ dest = immediate;
+ else
+ dest = pc + immediate;
+ break;
case 16 :
- if (opcode != 18) /* br conditional */
- immediate = ((instr & ~3) << 16) >> 16;
+ immediate = ((instr & ~3) << 16) >> 16; /* br conditional */
if (absolute)
dest = immediate;
else
dest = read_register (LR_REGNUM) & ~3;
else if (ext_op == 528) /* br cond to count reg */
- dest = read_register (CTR_REGNUM) & ~3;
-
+ {
+ dest = read_register (CTR_REGNUM) & ~3;
+
+ /* If we are about to execute a system call, dest is something
+ like 0x22fc or 0x3b00. Upon completion the system call
+ will return to the address in the link register. */
+ if (dest < TEXT_SEGMENT_BASE)
+ dest = read_register (LR_REGNUM) & ~3;
+ }
else return -1;
break;
/* AIX does not support PT_STEP. Simulate it. */
-int
+void
single_step (signal)
-int signal;
+ enum target_signal signal;
{
#define INSNLEN(OPCODE) 4
- static char breakp[] = BREAKPOINT;
- int ii, insn, ret, loc;
- int breaks[2], opcode;
+ static char le_breakp[] = LITTLE_BREAKPOINT;
+ static char be_breakp[] = BIG_BREAKPOINT;
+ char *breakp = TARGET_BYTE_ORDER == BIG_ENDIAN ? be_breakp : le_breakp;
+ int ii, insn;
+ CORE_ADDR loc;
+ CORE_ADDR breaks[2];
+ int opcode;
if (!one_stepped) {
- extern CORE_ADDR text_start;
loc = read_pc ();
- ret = read_memory (loc, &insn, sizeof (int));
- if (ret)
- printf ("Error in single_step()!!\n");
+ insn = read_memory_integer (loc, 4);
breaks[0] = loc + INSNLEN(insn);
opcode = insn >> 26;
if (breaks[1] == breaks[0])
breaks[1] = -1;
- stepBreaks[1].address = -1;
+ stepBreaks[1].address = 0;
for (ii=0; ii < 2; ++ii) {
if ( breaks[ii] == -1)
continue;
- read_memory (breaks[ii], &(stepBreaks[ii].data), sizeof(int));
+ read_memory (breaks[ii], stepBreaks[ii].data, 4);
- ret = write_memory (breaks[ii], breakp, sizeof(int));
+ write_memory (breaks[ii], breakp, 4);
stepBreaks[ii].address = breaks[ii];
}
one_stepped = 1;
- ptrace (PT_CONTINUE, inferior_pid, 1, signal, 0);
- }
- else {
+ } else {
/* remove step breakpoints. */
for (ii=0; ii < 2; ++ii)
- if (stepBreaks[ii].address != -1)
+ if (stepBreaks[ii].address != 0)
write_memory
- (stepBreaks[ii].address, &(stepBreaks[ii].data), sizeof(int));
+ (stepBreaks[ii].address, stepBreaks[ii].data, 4);
one_stepped = 0;
}
- errno = 0;
- return 1;
+ errno = 0; /* FIXME, don't ignore errors! */
+ /* What errors? {read,write}_memory call error(). */
}
-/* return pc value after skipping a function prologue. */
-
-skip_prologue (pc)
-int pc;
-{
- unsigned int tmp;
- unsigned int op;
-
- if (target_read_memory (pc, (char *)&op, sizeof (op)))
- return pc; /* Can't access it -- assume no prologue. */
- SWAP_TARGET_AND_HOST (&op, sizeof (op));
+/* return pc value after skipping a function prologue and also return
+ information about a function frame.
- /* Assume that subsequent fetches can fail with low probability. */
-
- if (op == 0x7c0802a6) { /* mflr r0 */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- if ((op & 0xfc00003e) == 0x7c000026) { /* mfcr Rx */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- if ((op & 0xfc000000) == 0x48000000) { /* bl foo, to save fprs??? */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
+ in struct rs6000_frameinfo fdata:
+ - frameless is TRUE, if function does not have a frame.
+ - nosavedpc is TRUE, if function does not save %pc value in its frame.
+ - offset is the number of bytes used in the frame to save registers.
+ - saved_gpr is the number of the first saved gpr.
+ - saved_fpr is the number of the first saved fpr.
+ - alloca_reg is the number of the register used for alloca() handling.
+ Otherwise -1.
+ - gpr_offset is the offset of the saved gprs
+ - fpr_offset is the offset of the saved fprs
+ - lr_offset is the offset of the saved lr
+ - cr_offset is the offset of the saved cr
+ */
- if ((op & 0xfc1f0000) == 0xbc010000) { /* stm Rx, NUM(r1) */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
+#define SIGNED_SHORT(x) \
+ ((sizeof (short) == 2) \
+ ? ((int)(short)(x)) \
+ : ((int)((((x) & 0xffff) ^ 0x8000) - 0x8000)))
- while (((tmp = op >> 16) == 0x9001) || /* st r0, NUM(r1) */
- (tmp == 0x9421) || /* stu r1, NUM(r1) */
- (op == 0x93e1fffc)) /* st r31,-4(r1) */
- {
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
+#define GET_SRC_REG(x) (((x) >> 21) & 0x1f)
- while ((tmp = (op >> 22)) == 0x20f) { /* l r31, ... or */
- pc += 4; /* l r30, ... */
- op = read_memory_integer (pc, 4);
- }
+CORE_ADDR
+skip_prologue (pc, fdata)
+ CORE_ADDR pc;
+ struct rs6000_framedata *fdata;
+{
+ CORE_ADDR orig_pc = pc;
+ char buf[4];
+ unsigned long op;
+ long offset = 0;
+ int lr_reg = 0;
+ int cr_reg = 0;
+ int reg;
+ int framep = 0;
+ int minimal_toc_loaded = 0;
+ static struct rs6000_framedata zero_frame;
+
+ *fdata = zero_frame;
+ fdata->saved_gpr = -1;
+ fdata->saved_fpr = -1;
+ fdata->alloca_reg = -1;
+ fdata->frameless = 1;
+ fdata->nosavedpc = 1;
+
+ if (target_read_memory (pc, buf, 4))
+ return pc; /* Can't access it -- assume no prologue. */
- /* store parameters into stack */
- while(
- (op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
- (op & 0xfc1f0000) == 0x90010000 || /* st r?, NUM(r1) */
- (op & 0xfc000000) == 0xfc000000 || /* frsp, fp?, .. */
- (op & 0xd0000000) == 0xd0000000) /* stfs, fp?, .. */
+ /* Assume that subsequent fetches can fail with low probability. */
+ pc -= 4;
+ for (;;)
{
- pc += 4; /* store fpr double */
+ pc += 4;
op = read_memory_integer (pc, 4);
- }
- if (op == 0x603f0000) { /* oril r31, r1, 0x0 */
- pc += 4; /* this happens if r31 is used as */
- op = read_memory_integer (pc, 4); /* frame ptr. (gcc does that) */
+ if ((op & 0xfc1fffff) == 0x7c0802a6) { /* mflr Rx */
+ lr_reg = (op & 0x03e00000) | 0x90010000;
+ continue;
+
+ } else if ((op & 0xfc1fffff) == 0x7c000026) { /* mfcr Rx */
+ cr_reg = (op & 0x03e00000) | 0x90010000;
+ continue;
+
+ } else if ((op & 0xfc1f0000) == 0xd8010000) { /* stfd Rx,NUM(r1) */
+ reg = GET_SRC_REG (op);
+ if (fdata->saved_fpr == -1 || fdata->saved_fpr > reg) {
+ fdata->saved_fpr = reg;
+ fdata->fpr_offset = SIGNED_SHORT (op) + offset;
+ }
+ continue;
+
+ } else if (((op & 0xfc1f0000) == 0xbc010000) || /* stm Rx, NUM(r1) */
+ ((op & 0xfc1f0000) == 0x90010000 && /* st rx,NUM(r1), rx >= r13 */
+ (op & 0x03e00000) >= 0x01a00000)) {
+
+ reg = GET_SRC_REG (op);
+ if (fdata->saved_gpr == -1 || fdata->saved_gpr > reg) {
+ fdata->saved_gpr = reg;
+ fdata->gpr_offset = SIGNED_SHORT (op) + offset;
+ }
+ continue;
+
+ } else if ((op & 0xffff0000) == 0x3c000000) { /* addis 0,0,NUM, used for >= 32k frames */
+ fdata->offset = (op & 0x0000ffff) << 16;
+ fdata->frameless = 0;
+ continue;
+
+ } else if ((op & 0xffff0000) == 0x60000000) { /* ori 0,0,NUM, 2nd half of >= 32k frames */
+ fdata->offset |= (op & 0x0000ffff);
+ fdata->frameless = 0;
+ continue;
+
+ } else if ((op & 0xffff0000) == lr_reg) { /* st Rx,NUM(r1) where Rx == lr */
+ fdata->lr_offset = SIGNED_SHORT (op) + offset;
+ fdata->nosavedpc = 0;
+ lr_reg = 0;
+ continue;
+
+ } else if ((op & 0xffff0000) == cr_reg) { /* st Rx,NUM(r1) where Rx == cr */
+ fdata->cr_offset = SIGNED_SHORT (op) + offset;
+ cr_reg = 0;
+ continue;
+
+ } else if (op == 0x48000005) { /* bl .+4 used in -mrelocatable */
+ continue;
+
+ } else if (op == 0x48000004) { /* b .+4 (xlc) */
+ break;
- tmp = 0;
- while ((op >> 16) == (0x907f + tmp)) { /* st r3, NUM(r31) */
- pc += 4; /* st r4, NUM(r31), ... */
- op = read_memory_integer (pc, 4);
- tmp += 0x20;
+ } else if (((op & 0xffff0000) == 0x801e0000 || /* lwz 0,NUM(r30), used in V.4 -mrelocatable */
+ op == 0x7fc0f214) && /* add r30,r0,r30, used in V.4 -mrelocatable */
+ lr_reg == 0x901e0000) {
+ continue;
+
+ } else if ((op & 0xffff0000) == 0x3fc00000 || /* addis 30,0,foo@ha, used in V.4 -mminimal-toc */
+ (op & 0xffff0000) == 0x3bde0000) { /* addi 30,30,foo@l */
+ continue;
+
+ } else if ((op & 0xfc000000) == 0x48000000) { /* bl foo, to save fprs??? */
+
+ fdata->frameless = 0;
+ /* Don't skip over the subroutine call if it is not within the first
+ three instructions of the prologue. */
+ if ((pc - orig_pc) > 8)
+ break;
+
+ op = read_memory_integer (pc+4, 4);
+
+ /* At this point, make sure this is not a trampoline function
+ (a function that simply calls another functions, and nothing else).
+ If the next is not a nop, this branch was part of the function
+ prologue. */
+
+ if (op == 0x4def7b82 || op == 0) /* crorc 15, 15, 15 */
+ break; /* don't skip over this branch */
+
+ continue;
+
+ /* update stack pointer */
+ } else if ((op & 0xffff0000) == 0x94210000) { /* stu r1,NUM(r1) */
+ fdata->frameless = 0;
+ fdata->offset = SIGNED_SHORT (op);
+ offset = fdata->offset;
+ continue;
+
+ } else if (op == 0x7c21016e) { /* stwux 1,1,0 */
+ fdata->frameless = 0;
+ offset = fdata->offset;
+ continue;
+
+ /* Load up minimal toc pointer */
+ } else if ((op >> 22) == 0x20f
+ && ! minimal_toc_loaded) { /* l r31,... or l r30,... */
+ minimal_toc_loaded = 1;
+ continue;
+
+ /* store parameters in stack */
+ } else if ((op & 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */
+ (op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
+ (op & 0xfc1f0000) == 0xfc010000) { /* frsp, fp?,NUM(r1) */
+ continue;
+
+ /* store parameters in stack via frame pointer */
+ } else if (framep &&
+ ((op & 0xfc1f0000) == 0x901f0000 || /* st rx,NUM(r1) */
+ (op & 0xfc1f0000) == 0xd81f0000 || /* stfd Rx,NUM(r1) */
+ (op & 0xfc1f0000) == 0xfc1f0000)) { /* frsp, fp?,NUM(r1) */
+ continue;
+
+ /* Set up frame pointer */
+ } else if (op == 0x603f0000 /* oril r31, r1, 0x0 */
+ || op == 0x7c3f0b78) { /* mr r31, r1 */
+ fdata->frameless = 0;
+ framep = 1;
+ fdata->alloca_reg = 31;
+ continue;
+
+ /* Another way to set up the frame pointer. */
+ } else if ((op & 0xfc1fffff) == 0x38010000) { /* addi rX, r1, 0x0 */
+ fdata->frameless = 0;
+ framep = 1;
+ fdata->alloca_reg = (op & ~0x38010000) >> 21;
+ continue;
+
+ } else {
+ break;
+ }
}
- }
+
#if 0
/* I have problems with skipping over __main() that I need to address
* sometime. Previously, I used to use misc_function_vector which
function as well. */
tmp = find_pc_misc_function (pc);
- if (tmp >= 0 && !strcmp (misc_function_vector [tmp].name, "main"))
+ if (tmp >= 0 && STREQ (misc_function_vector [tmp].name, "main"))
return pc + 8;
}
}
#endif /* 0 */
+ fdata->offset = - fdata->offset;
return pc;
}
-/* text start and end addresses in virtual memory. */
-
-CORE_ADDR text_start;
-CORE_ADDR text_end;
-
-
/*************************************************************************
Support for creating pushind a dummy frame into the stack, and popping
frames, etc.
/* push a dummy frame into stack, save all register. Currently we are saving
only gpr's and fpr's, which is not good enough! FIXMEmgo */
+void
push_dummy_frame ()
{
- int sp, pc; /* stack pointer and link register */
+ /* stack pointer. */
+ CORE_ADDR sp;
+ /* Same thing, target byte order. */
+ char sp_targ[4];
+
+ /* link register. */
+ CORE_ADDR pc;
+ /* Same thing, target byte order. */
+ char pc_targ[4];
+
+ /* Needed to figure out where to save the dummy link area.
+ FIXME: There should be an easier way to do this, no? tiemann 9/9/95. */
+ struct rs6000_framedata fdata;
+
int ii;
- fetch_inferior_registers (-1);
+ target_fetch_registers (-1);
if (dummy_frame_count >= dummy_frame_size) {
dummy_frame_size += DUMMY_FRAME_ADDR_SIZE;
}
sp = read_register(SP_REGNUM);
- pc = read_register(PC_REGNUM);
+ pc = read_register(PC_REGNUM);
+ store_address (pc_targ, 4, pc);
+
+ (void) skip_prologue (get_pc_function_start (pc) + FUNCTION_START_OFFSET, &fdata);
dummy_frame_addr [dummy_frame_count++] = sp;
before writing register values into the new frame, decrement and update
%sp first in order to secure your frame. */
+ /* FIXME: We don't check if the stack really has this much space.
+ This is a problem on the ppc simulator (which only grants one page
+ (4096 bytes) by default. */
+
write_register (SP_REGNUM, sp-DUMMY_FRAME_SIZE);
/* gdb relies on the state of current_frame. We'd better update it,
otherwise things like do_registers_info() wouldn't work properly! */
flush_cached_frames ();
- set_current_frame (create_new_frame (sp-DUMMY_FRAME_SIZE, pc));
/* save program counter in link register's space. */
- write_memory (sp+8, &pc, 4);
+ write_memory (sp + (fdata.lr_offset ? fdata.lr_offset : DEFAULT_LR_SAVE),
+ pc_targ, 4);
/* save all floating point and general purpose registers here. */
}
/* Save sp or so called back chain right here. */
- write_memory (sp-DUMMY_FRAME_SIZE, &sp, 4);
+ store_address (sp_targ, 4, sp);
+ write_memory (sp-DUMMY_FRAME_SIZE, sp_targ, 4);
sp -= DUMMY_FRAME_SIZE;
/* And finally, this is the back chain. */
- write_memory (sp+8, &pc, 4);
+ write_memory (sp+8, pc_targ, 4);
}
addresses of dummy frames as such. When poping happens and when we
detect that was a dummy frame, we pop it back to its parent by using
dummy frame stack (`dummy_frame_addr' array).
+
+FIXME: This whole concept is broken. You should be able to detect
+a dummy stack frame *on the user's stack itself*. When you do,
+then you know the format of that stack frame -- including its
+saved SP register! There should *not* be a separate stack in the
+GDB process that keeps track of these dummy frames! -- gnu@cygnus.com Aug92
*/
+static void
pop_dummy_frame ()
{
CORE_ADDR sp, pc;
®isters[REGISTER_BYTE (FPLAST_REGNUM + ii)], 4);
read_memory (sp-(DUMMY_FRAME_SIZE-8),
- ®isters [REGISTER_BYTE(PC_REGNUM)], 4);
+ ®isters [REGISTER_BYTE(PC_REGNUM)], 4);
/* when a dummy frame was being pushed, we had to decrement %sp first, in
order to secure astack space. Thus, saved %sp (or %r1) value, is not the
/* Now we can restore all registers. */
- store_inferior_registers (-1);
+ target_store_registers (-1);
pc = read_pc ();
flush_cached_frames ();
- set_current_frame (create_new_frame (sp, pc));
}
/* pop the innermost frame, go back to the caller. */
+void
pop_frame ()
{
- int pc, lr, sp, prev_sp; /* %pc, %lr, %sp */
- struct aix_framedata fdata;
- FRAME fr = get_current_frame ();
+ CORE_ADDR pc, lr, sp, prev_sp; /* %pc, %lr, %sp */
+ struct rs6000_framedata fdata;
+ struct frame_info *frame = get_current_frame ();
int addr, ii;
pc = read_pc ();
- sp = FRAME_FP (fr);
+ sp = FRAME_FP (frame);
if (stop_stack_dummy && dummy_frame_count) {
pop_dummy_frame ();
return;
}
+ /* Make sure that all registers are valid. */
+ read_register_bytes (0, NULL, REGISTER_BYTES);
+
/* figure out previous %pc value. If the function is frameless, it is
still in the link register, otherwise walk the frames and retrieve the
saved %pc value in the previous frame. */
- addr = get_pc_function_start (fr->pc) + FUNCTION_START_OFFSET;
- function_frame_info (addr, &fdata);
+ addr = get_pc_function_start (frame->pc) + FUNCTION_START_OFFSET;
+ (void) skip_prologue (addr, &fdata);
- read_memory (sp, &prev_sp, 4);
if (fdata.frameless)
+ prev_sp = sp;
+ else
+ prev_sp = read_memory_integer (sp, 4);
+ if (fdata.lr_offset == 0)
lr = read_register (LR_REGNUM);
else
- read_memory (prev_sp+8, &lr, 4);
+ lr = read_memory_integer (prev_sp + fdata.lr_offset, 4);
/* reset %pc value. */
write_register (PC_REGNUM, lr);
addr = prev_sp - fdata.offset;
if (fdata.saved_gpr != -1)
- for (ii=fdata.saved_gpr; ii <= 31; ++ii) {
+ for (ii = fdata.saved_gpr; ii <= 31; ++ii) {
read_memory (addr, ®isters [REGISTER_BYTE (ii)], 4);
- addr += sizeof (int);
+ addr += 4;
}
if (fdata.saved_fpr != -1)
- for (ii=fdata.saved_fpr; ii <= 31; ++ii) {
+ for (ii = fdata.saved_fpr; ii <= 31; ++ii) {
read_memory (addr, ®isters [REGISTER_BYTE (ii+FP0_REGNUM)], 8);
addr += 8;
}
write_register (SP_REGNUM, prev_sp);
- store_inferior_registers (-1);
+ target_store_registers (-1);
flush_cached_frames ();
- set_current_frame (create_new_frame (prev_sp, lr));
}
-
/* fixup the call sequence of a dummy function, with the real function address.
its argumets will be passed by gdb. */
-fix_call_dummy(dummyname, pc, fun, nargs, type)
- char *dummyname;
- int pc;
- int fun;
- int nargs; /* not used */
- int type; /* not used */
-
+void
+fix_call_dummy (dummyname, pc, fun, nargs, type)
+ char *dummyname;
+ CORE_ADDR pc;
+ CORE_ADDR fun;
+ int nargs; /* not used */
+ int type; /* not used */
{
#define TOC_ADDR_OFFSET 20
#define TARGET_ADDR_OFFSET 28
int ii;
- unsigned long target_addr;
- unsigned long tocvalue;
+ CORE_ADDR target_addr;
+ CORE_ADDR tocvalue;
target_addr = fun;
tocvalue = find_toc_address (target_addr);
*(int*)((char*)dummyname + TARGET_ADDR_OFFSET+4) = ii;
}
-
-
-/* return information about a function frame.
- in struct aix_frameinfo fdata:
- - frameless is TRUE, if function does not save %pc value in its frame.
- - offset is the number of bytes used in the frame to save registers.
- - saved_gpr is the number of the first saved gpr.
- - saved_fpr is the number of the first saved fpr.
- - alloca_reg is the number of the register used for alloca() handling.
- Otherwise -1.
- */
-function_frame_info (pc, fdata)
- int pc;
- struct aix_framedata *fdata;
-{
- unsigned int tmp;
- register unsigned int op;
-
- fdata->offset = 0;
- fdata->saved_gpr = fdata->saved_fpr = fdata->alloca_reg = -1;
-
- op = read_memory_integer (pc, 4);
- if (op == 0x7c0802a6) { /* mflr r0 */
- pc += 4;
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
- else /* else, this is a frameless invocation */
- fdata->frameless = 1;
-
-
- if ((op & 0xfc00003e) == 0x7c000026) { /* mfcr Rx */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- if ((op & 0xfc000000) == 0x48000000) { /* bl foo, to save fprs??? */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- if ((op & 0xfc1f0000) == 0xd8010000) { /* stfd Rx,NUM(r1) */
- pc += 4; /* store floating register double */
- op = read_memory_integer (pc, 4);
- }
-
- if ((op & 0xfc1f0000) == 0xbc010000) { /* stm Rx, NUM(r1) */
- int tmp2;
- fdata->saved_gpr = (op >> 21) & 0x1f;
- tmp2 = op & 0xffff;
- if (tmp2 > 0x7fff)
- tmp2 = 0xffff0000 | tmp2;
-
- if (tmp2 < 0) {
- tmp2 = tmp2 * -1;
- fdata->saved_fpr = (tmp2 - ((32 - fdata->saved_gpr) * 4)) / 8;
- if ( fdata->saved_fpr > 0)
- fdata->saved_fpr = 32 - fdata->saved_fpr;
- else
- fdata->saved_fpr = -1;
- }
- fdata->offset = tmp2;
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- while (((tmp = op >> 16) == 0x9001) || /* st r0, NUM(r1) */
- (tmp == 0x9421) || /* stu r1, NUM(r1) */
- (op == 0x93e1fffc)) /* st r31,-4(r1) */
- {
- /* gcc takes a short cut and uses this instruction to save r31 only. */
-
- if (op == 0x93e1fffc) {
- if (fdata->offset)
-/* fatal ("Unrecognized prolog."); */
- printf ("Unrecognized prolog!\n");
-
- fdata->saved_gpr = 31;
- fdata->offset = 4;
- }
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- while ((tmp = (op >> 22)) == 0x20f) { /* l r31, ... or */
- pc += 4; /* l r30, ... */
- op = read_memory_integer (pc, 4);
- }
-
- /* store parameters into stack */
- while(
- (op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
- (op & 0xfc1f0000) == 0x90010000 || /* st r?, NUM(r1) */
- (op & 0xfc000000) == 0xfc000000 || /* frsp, fp?, .. */
- (op & 0xd0000000) == 0xd0000000) /* stfs, fp?, .. */
- {
- pc += 4; /* store fpr double */
- op = read_memory_integer (pc, 4);
- }
-
- if (op == 0x603f0000) /* oril r31, r1, 0x0 */
- fdata->alloca_reg = 31;
-}
-
-
-/* Pass the arguments in either registers, or in the stack. In RS6000, the first
- eight words of the argument list (that might be less than eight parameters if
- some parameters occupy more than one word) are passed in r3..r11 registers.
- float and double parameters are passed in fpr's, in addition to that. Rest of
- the parameters if any are passed in user stack. There might be cases in which
- half of the parameter is copied into registers, the other half is pushed into
+/* Pass the arguments in either registers, or in the stack. In RS6000,
+ the first eight words of the argument list (that might be less than
+ eight parameters if some parameters occupy more than one word) are
+ passed in r3..r11 registers. float and double parameters are
+ passed in fpr's, in addition to that. Rest of the parameters if any
+ are passed in user stack. There might be cases in which half of the
+ parameter is copied into registers, the other half is pushed into
stack.
If the function is returning a structure, then the return address is passed
CORE_ADDR
push_arguments (nargs, args, sp, struct_return, struct_addr)
- int nargs;
- value *args;
- CORE_ADDR sp;
- int struct_return;
- CORE_ADDR struct_addr;
+ int nargs;
+ value_ptr *args;
+ CORE_ADDR sp;
+ int struct_return;
+ CORE_ADDR struct_addr;
{
- int ii, len;
+ int ii;
+ int len = 0;
int argno; /* current argument number */
int argbytes; /* current argument byte */
char tmp_buffer [50];
- value arg;
int f_argno = 0; /* current floating point argno */
+ value_ptr arg = 0;
+ struct type *type;
- CORE_ADDR saved_sp, pc;
+ CORE_ADDR saved_sp;
if ( dummy_frame_count <= 0)
- printf ("FATAL ERROR -push_arguments()! frame not found!!\n");
+ printf_unfiltered ("FATAL ERROR -push_arguments()! frame not found!!\n");
/* The first eight words of ther arguments are passed in registers. Copy
them appropriately.
for (argno=0, argbytes=0; argno < nargs && ii<8; ++ii) {
- arg = value_arg_coerce (args[argno]);
- len = TYPE_LENGTH (VALUE_TYPE (arg));
+ arg = args[argno];
+ type = check_typedef (VALUE_TYPE (arg));
+ len = TYPE_LENGTH (type);
- if (TYPE_CODE (VALUE_TYPE (arg)) == TYPE_CODE_FLT) {
+ if (TYPE_CODE (type) == TYPE_CODE_FLT) {
/* floating point arguments are passed in fpr's, as well as gpr's.
There are 13 fpr's reserved for passing parameters. At this point
there is no way we would run out of them. */
if (len > 8)
- printf (
+ printf_unfiltered (
"Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno);
- bcopy (VALUE_CONTENTS (arg),
- ®isters[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)], len);
+ memcpy (®isters[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)], VALUE_CONTENTS (arg),
+ len);
++f_argno;
}
while (argbytes < len) {
*(int*)®isters[REGISTER_BYTE(ii+3)] = 0;
- bcopy ( ((char*)VALUE_CONTENTS (arg))+argbytes,
- ®isters[REGISTER_BYTE(ii+3)],
+ memcpy (®isters[REGISTER_BYTE(ii+3)],
+ ((char*)VALUE_CONTENTS (arg))+argbytes,
(len - argbytes) > 4 ? 4 : len - argbytes);
++ii, argbytes += 4;
}
else { /* Argument can fit in one register. No problem. */
*(int*)®isters[REGISTER_BYTE(ii+3)] = 0;
- bcopy (VALUE_CONTENTS (arg), ®isters[REGISTER_BYTE(ii+3)], len);
+ memcpy (®isters[REGISTER_BYTE(ii+3)], VALUE_CONTENTS (arg), len);
}
++argno;
}
if ((argno < nargs) || argbytes) {
int space = 0, jj;
- value val;
if (argbytes) {
space += ((len - argbytes + 3) & -4);
jj = argno;
for (; jj < nargs; ++jj) {
- val = value_arg_coerce (args[jj]);
+ value_ptr val = args[jj];
space += ((TYPE_LENGTH (VALUE_TYPE (val))) + 3) & -4;
}
/* push the rest of the arguments into stack. */
for (; argno < nargs; ++argno) {
- arg = value_arg_coerce (args[argno]);
- len = TYPE_LENGTH (VALUE_TYPE (arg));
+ arg = args[argno];
+ type = check_typedef (VALUE_TYPE (arg));
+ len = TYPE_LENGTH (type);
/* float types should be passed in fpr's, as well as in the stack. */
- if (TYPE_CODE (VALUE_TYPE (arg)) == TYPE_CODE_FLT && f_argno < 13) {
+ if (TYPE_CODE (type) == TYPE_CODE_FLT && f_argno < 13) {
if (len > 8)
- printf (
+ printf_unfiltered (
"Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno);
- bcopy (VALUE_CONTENTS (arg),
- ®isters[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)], len);
+ memcpy (®isters[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)], VALUE_CONTENTS (arg),
+ len);
++f_argno;
}
- write_memory (sp+24+(ii*4), VALUE_CONTENTS (arg), len);
+ write_memory (sp+24+(ii*4), (char *) VALUE_CONTENTS (arg), len);
ii += ((len + 3) & -4) / 4;
}
}
read_memory (saved_sp, tmp_buffer, 24);
write_memory (sp, tmp_buffer, 24);
- write_memory (sp, &saved_sp, 4); /* set back chain properly */
+ /* set back chain properly */
+ store_address (tmp_buffer, 4, saved_sp);
+ write_memory (sp, tmp_buffer, 4);
- store_inferior_registers (-1);
+ target_store_registers (-1);
return sp;
}
/* a given return value in `regbuf' with a type `valtype', extract and copy its
value into `valbuf' */
+void
extract_return_value (valtype, regbuf, valbuf)
- struct type *valtype;
- char regbuf[REGISTER_BYTES];
- char *valbuf;
+ struct type *valtype;
+ char regbuf[REGISTER_BYTES];
+ char *valbuf;
{
+ int offset = 0;
if (TYPE_CODE (valtype) == TYPE_CODE_FLT) {
necessary. */
if (TYPE_LENGTH (valtype) > 4) /* this is a double */
- bcopy (®buf[REGISTER_BYTE (FP0_REGNUM + 1)], valbuf,
+ memcpy (valbuf, ®buf[REGISTER_BYTE (FP0_REGNUM + 1)],
TYPE_LENGTH (valtype));
else { /* float */
- bcopy (®buf[REGISTER_BYTE (FP0_REGNUM + 1)], &dd, 8);
+ memcpy (&dd, ®buf[REGISTER_BYTE (FP0_REGNUM + 1)], 8);
ff = (float)dd;
- bcopy (&ff, valbuf, sizeof(float));
+ memcpy (valbuf, &ff, sizeof(float));
}
}
- else
+ else {
/* return value is copied starting from r3. */
- bcopy (®buf[REGISTER_BYTE (3)], valbuf, TYPE_LENGTH (valtype));
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN
+ && TYPE_LENGTH (valtype) < REGISTER_RAW_SIZE (3))
+ offset = REGISTER_RAW_SIZE (3) - TYPE_LENGTH (valtype);
+
+ memcpy (valbuf, regbuf + REGISTER_BYTE (3) + offset,
+ TYPE_LENGTH (valtype));
+ }
}
-/* keep keep structure return address in this variable. */
+/* keep structure return address in this variable.
+ FIXME: This is a horrid kludge which should not be allowed to continue
+ living. This only allows a single nested call to a structure-returning
+ function. Come on, guys! -- gnu@cygnus.com, Aug 92 */
CORE_ADDR rs6000_struct_return_address;
-/* Throw away this debugging code. FIXMEmgo. */
-print_frame(fram)
-int fram;
-{
- int ii, val;
- for (ii=0; ii<40; ++ii) {
- if ((ii % 4) == 0)
- printf ("\n");
- val = read_memory_integer (fram + ii * 4, 4);
- printf ("0x%08x\t", val);
- }
- printf ("\n");
-}
-
-
-
/* Indirect function calls use a piece of trampoline code to do context
switching, i.e. to set the new TOC table. Skip such code if we are on
its first instruction (as when we have single-stepped to here).
+ Also skip shared library trampoline code (which is different from
+ indirect function call trampolines).
Result is desired PC to step until, or NULL if we are not in
trampoline code. */
+CORE_ADDR
skip_trampoline_code (pc)
-int pc;
+ CORE_ADDR pc;
{
register unsigned int ii, op;
+ CORE_ADDR solib_target_pc;
static unsigned trampoline_code[] = {
0x800b0000, /* l r0,0x0(r11) */
0
};
+ /* If pc is in a shared library trampoline, return its target. */
+ solib_target_pc = find_solib_trampoline_target (pc);
+ if (solib_target_pc)
+ return solib_target_pc;
+
for (ii=0; trampoline_code[ii]; ++ii) {
op = read_memory_integer (pc + (ii*4), 4);
if (op != trampoline_code [ii])
- return NULL;
+ return 0;
}
ii = read_register (11); /* r11 holds destination addr */
pc = read_memory_integer (ii, 4); /* (r11) value */
return pc;
}
+/* Determines whether the function FI has a frame on the stack or not. */
+
+int
+frameless_function_invocation (fi)
+ struct frame_info *fi;
+{
+ CORE_ADDR func_start;
+ struct rs6000_framedata fdata;
+
+ if (fi->next != NULL)
+ /* Don't even think about framelessness except on the innermost frame. */
+ /* FIXME: Can also be frameless if fi->next->signal_handler_caller (if
+ a signal happens while executing in a frameless function). */
+ return 0;
+
+ func_start = get_pc_function_start (fi->pc) + FUNCTION_START_OFFSET;
+
+ /* If we failed to find the start of the function, it is a mistake
+ to inspect the instructions. */
+
+ if (!func_start)
+ return 0;
+
+ (void) skip_prologue (func_start, &fdata);
+ return fdata.frameless;
+}
+
+/* Return the PC saved in a frame */
+
+unsigned long
+frame_saved_pc (fi)
+ struct frame_info *fi;
+{
+ CORE_ADDR func_start;
+ struct rs6000_framedata fdata;
+
+ if (fi->signal_handler_caller)
+ return read_memory_integer (fi->frame + SIG_FRAME_PC_OFFSET, 4);
+
+ func_start = get_pc_function_start (fi->pc) + FUNCTION_START_OFFSET;
+
+ /* If we failed to find the start of the function, it is a mistake
+ to inspect the instructions. */
+ if (!func_start)
+ return 0;
+
+ (void) skip_prologue (func_start, &fdata);
+
+ if (fdata.lr_offset == 0 && fi->next != NULL)
+ return read_memory_integer (rs6000_frame_chain (fi) + DEFAULT_LR_SAVE, 4);
+
+ if (fdata.lr_offset == 0)
+ return read_register (LR_REGNUM);
+
+ return read_memory_integer (rs6000_frame_chain (fi) + fdata.lr_offset, 4);
+}
+
+/* If saved registers of frame FI are not known yet, read and cache them.
+ &FDATAP contains rs6000_framedata; TDATAP can be NULL,
+ in which case the framedata are read. */
+
+static void
+frame_get_cache_fsr (fi, fdatap)
+ struct frame_info *fi;
+ struct rs6000_framedata *fdatap;
+{
+ int ii;
+ CORE_ADDR frame_addr;
+ struct rs6000_framedata work_fdata;
+
+ if (fi->cache_fsr)
+ return;
+
+ if (fdatap == NULL) {
+ fdatap = &work_fdata;
+ (void) skip_prologue (get_pc_function_start (fi->pc), fdatap);
+ }
+
+ fi->cache_fsr = (struct frame_saved_regs *)
+ obstack_alloc (&frame_cache_obstack, sizeof (struct frame_saved_regs));
+ memset (fi->cache_fsr, '\0', sizeof (struct frame_saved_regs));
+
+ if (fi->prev && fi->prev->frame)
+ frame_addr = fi->prev->frame;
+ else
+ frame_addr = read_memory_integer (fi->frame, 4);
+
+ /* if != -1, fdatap->saved_fpr is the smallest number of saved_fpr.
+ All fpr's from saved_fpr to fp31 are saved. */
+
+ if (fdatap->saved_fpr >= 0) {
+ int fpr_offset = frame_addr + fdatap->fpr_offset;
+ for (ii = fdatap->saved_fpr; ii < 32; ii++) {
+ fi->cache_fsr->regs [FP0_REGNUM + ii] = fpr_offset;
+ fpr_offset += 8;
+ }
+ }
+
+ /* if != -1, fdatap->saved_gpr is the smallest number of saved_gpr.
+ All gpr's from saved_gpr to gpr31 are saved. */
+
+ if (fdatap->saved_gpr >= 0) {
+ int gpr_offset = frame_addr + fdatap->gpr_offset;
+ for (ii = fdatap->saved_gpr; ii < 32; ii++) {
+ fi->cache_fsr->regs [ii] = gpr_offset;
+ gpr_offset += 4;
+ }
+ }
+
+ /* If != 0, fdatap->cr_offset is the offset from the frame that holds
+ the CR. */
+ if (fdatap->cr_offset != 0)
+ fi->cache_fsr->regs [CR_REGNUM] = frame_addr + fdatap->cr_offset;
+
+ /* If != 0, fdatap->lr_offset is the offset from the frame that holds
+ the LR. */
+ if (fdatap->lr_offset != 0)
+ fi->cache_fsr->regs [LR_REGNUM] = frame_addr + fdatap->lr_offset;
+}
+
+/* Return the address of a frame. This is the inital %sp value when the frame
+ was first allocated. For functions calling alloca(), it might be saved in
+ an alloca register. */
+
+CORE_ADDR
+frame_initial_stack_address (fi)
+ struct frame_info *fi;
+{
+ CORE_ADDR tmpaddr;
+ struct rs6000_framedata fdata;
+ struct frame_info *callee_fi;
+
+ /* if the initial stack pointer (frame address) of this frame is known,
+ just return it. */
+
+ if (fi->initial_sp)
+ return fi->initial_sp;
+
+ /* find out if this function is using an alloca register.. */
+
+ (void) skip_prologue (get_pc_function_start (fi->pc), &fdata);
+
+ /* if saved registers of this frame are not known yet, read and cache them. */
+
+ if (!fi->cache_fsr)
+ frame_get_cache_fsr (fi, &fdata);
+
+ /* If no alloca register used, then fi->frame is the value of the %sp for
+ this frame, and it is good enough. */
+
+ if (fdata.alloca_reg < 0) {
+ fi->initial_sp = fi->frame;
+ return fi->initial_sp;
+ }
+
+ /* This function has an alloca register. If this is the top-most frame
+ (with the lowest address), the value in alloca register is good. */
+
+ if (!fi->next)
+ return fi->initial_sp = read_register (fdata.alloca_reg);
+
+ /* Otherwise, this is a caller frame. Callee has usually already saved
+ registers, but there are exceptions (such as when the callee
+ has no parameters). Find the address in which caller's alloca
+ register is saved. */
+
+ for (callee_fi = fi->next; callee_fi; callee_fi = callee_fi->next) {
+
+ if (!callee_fi->cache_fsr)
+ frame_get_cache_fsr (callee_fi, NULL);
+
+ /* this is the address in which alloca register is saved. */
+
+ tmpaddr = callee_fi->cache_fsr->regs [fdata.alloca_reg];
+ if (tmpaddr) {
+ fi->initial_sp = read_memory_integer (tmpaddr, 4);
+ return fi->initial_sp;
+ }
+
+ /* Go look into deeper levels of the frame chain to see if any one of
+ the callees has saved alloca register. */
+ }
+
+ /* If alloca register was not saved, by the callee (or any of its callees)
+ then the value in the register is still good. */
+
+ return fi->initial_sp = read_register (fdata.alloca_reg);
+}
+
+CORE_ADDR
+rs6000_frame_chain (thisframe)
+ struct frame_info *thisframe;
+{
+ CORE_ADDR fp;
+ if (inside_entry_file ((thisframe)->pc))
+ return 0;
+ if (thisframe->signal_handler_caller)
+ fp = read_memory_integer (thisframe->frame + SIG_FRAME_FP_OFFSET, 4);
+ else
+ fp = read_memory_integer ((thisframe)->frame, 4);
+
+ return fp;
+}
+\f
+/* Keep an array of load segment information and their TOC table addresses.
+ This info will be useful when calling a shared library function by hand. */
+
+struct loadinfo {
+ CORE_ADDR textorg, dataorg;
+ unsigned long toc_offset;
+};
+
+#define LOADINFOLEN 10
+
+static struct loadinfo *loadinfo = NULL;
+static int loadinfolen = 0;
+static int loadinfotocindex = 0;
+static int loadinfotextindex = 0;
+
+
+void
+xcoff_init_loadinfo ()
+{
+ loadinfotocindex = 0;
+ loadinfotextindex = 0;
+
+ if (loadinfolen == 0) {
+ loadinfo = (struct loadinfo *)
+ xmalloc (sizeof (struct loadinfo) * LOADINFOLEN);
+ loadinfolen = LOADINFOLEN;
+ }
+}
+
+
+/* FIXME -- this is never called! */
+#if 0
+void
+free_loadinfo ()
+{
+ if (loadinfo)
+ free (loadinfo);
+ loadinfo = NULL;
+ loadinfolen = 0;
+ loadinfotocindex = 0;
+ loadinfotextindex = 0;
+}
+#endif
+
+/* this is called from xcoffread.c */
+
+void
+xcoff_add_toc_to_loadinfo (tocoff)
+ unsigned long tocoff;
+{
+ while (loadinfotocindex >= loadinfolen) {
+ loadinfolen += LOADINFOLEN;
+ loadinfo = (struct loadinfo *)
+ xrealloc (loadinfo, sizeof(struct loadinfo) * loadinfolen);
+ }
+ loadinfo [loadinfotocindex++].toc_offset = tocoff;
+}
+
+void
+add_text_to_loadinfo (textaddr, dataaddr)
+ CORE_ADDR textaddr;
+ CORE_ADDR dataaddr;
+{
+ while (loadinfotextindex >= loadinfolen) {
+ loadinfolen += LOADINFOLEN;
+ loadinfo = (struct loadinfo *)
+ xrealloc (loadinfo, sizeof(struct loadinfo) * loadinfolen);
+ }
+ loadinfo [loadinfotextindex].textorg = textaddr;
+ loadinfo [loadinfotextindex].dataorg = dataaddr;
+ ++loadinfotextindex;
+}
+
+
+/* Note that this assumes that the "textorg" and "dataorg" elements of
+ a member of this array are correlated with the "toc_offset" element
+ of the same member. This is taken care of because the loops which
+ assign the former (in xcoff_relocate_symtab or xcoff_relocate_core)
+ and the latter (in scan_xcoff_symtab, via vmap_symtab, in
+ vmap_ldinfo or xcoff_relocate_core) traverse the same objfiles in
+ the same order. */
+
+static CORE_ADDR
+find_toc_address (pc)
+ CORE_ADDR pc;
+{
+ int ii, toc_entry, tocbase = 0;
+
+ toc_entry = -1;
+ for (ii=0; ii < loadinfotextindex; ++ii)
+ if (pc > loadinfo[ii].textorg && loadinfo[ii].textorg > tocbase) {
+ toc_entry = ii;
+ tocbase = loadinfo[ii].textorg;
+ }
+
+ if (toc_entry == -1)
+ error ("Unable to find TOC entry for pc 0x%x\n", pc);
+ return loadinfo[toc_entry].dataorg + loadinfo[toc_entry].toc_offset;
+}
+
+/* Return nonzero if ADDR (a function pointer) is in the data space and
+ is therefore a special function pointer. */
+
+int
+is_magic_function_pointer (addr)
+ CORE_ADDR addr;
+{
+ struct obj_section *s;
+
+ s = find_pc_section (addr);
+ if (s && s->the_bfd_section->flags & SEC_CODE)
+ return 0;
+ else
+ return 1;
+}
+
+#ifdef GDB_TARGET_POWERPC
+int
+gdb_print_insn_powerpc (memaddr, info)
+ bfd_vma memaddr;
+ disassemble_info *info;
+{
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ return print_insn_big_powerpc (memaddr, info);
+ else
+ return print_insn_little_powerpc (memaddr, info);
+}
+#endif
+
+void
+_initialize_rs6000_tdep ()
+{
+#ifndef ELF_OBJECT_FORMAT
+ {
+ extern void (*xcoff_add_toc_to_loadinfo_hook) PARAMS ((unsigned long));
+ extern void (*xcoff_init_loadinfo_hook) PARAMS ((void));
+
+ /* Initialize hook in xcoffread for recording the toc offset value
+ of a symbol table into the ldinfo structure, for native rs6000
+ config. */
+ xcoff_add_toc_to_loadinfo_hook = &xcoff_add_toc_to_loadinfo;
+
+ /* Initialize hook in xcoffread for calling xcoff_init_loadinfo in
+ a native rs6000 config. */
+ xcoff_init_loadinfo_hook = &xcoff_init_loadinfo;
+ }
+#endif /* ELF_OBJECT_FORMAT */
+
+ /* FIXME, this should not be decided via ifdef. */
+#ifdef GDB_TARGET_POWERPC
+ tm_print_insn = gdb_print_insn_powerpc;
+#else
+ tm_print_insn = print_insn_rs6000;
+#endif
+}