/* Target-dependent code for GDB, the GNU debugger.
- Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995
+ Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996
Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "frame.h"
#include "symtab.h"
#include "target.h"
#include "gdbcore.h"
-
+#include "symfile.h"
+#include "objfiles.h"
#include "xcoffsolib.h"
-#include <a.out.h>
-
extern struct obstack frame_cache_obstack;
extern int errno;
/* Static function prototypes */
-static CORE_ADDR
-find_toc_address PARAMS ((CORE_ADDR pc));
+static CORE_ADDR find_toc_address PARAMS ((CORE_ADDR pc));
-static CORE_ADDR
-branch_dest PARAMS ((int opcode, int instr, CORE_ADDR pc, CORE_ADDR safety));
+static CORE_ADDR branch_dest PARAMS ((int opcode, int instr, CORE_ADDR pc,
+ CORE_ADDR safety));
-static void
-frame_get_cache_fsr PARAMS ((struct frame_info *fi,
- struct aix_framedata *fdatap));
+static void frame_get_cache_fsr PARAMS ((struct frame_info *fi,
+ struct rs6000_framedata *fdatap));
+
+static void pop_dummy_frame PARAMS ((void));
+
+/* Calculate the destination of a branch/jump. Return -1 if not a branch. */
-/*
- * Calculate the destination of a branch/jump. Return -1 if not a branch.
- */
static CORE_ADDR
branch_dest (opcode, instr, pc, safety)
int opcode;
CORE_ADDR pc;
CORE_ADDR safety;
{
- register long offset;
CORE_ADDR dest;
int immediate;
int absolute;
void
single_step (signal)
- int signal;
+ enum target_signal signal;
{
#define INSNLEN(OPCODE) 4
- static char breakp[] = BREAKPOINT;
+ static char le_breakp[] = LITTLE_BREAKPOINT;
+ static char be_breakp[] = BIG_BREAKPOINT;
+ char *breakp = TARGET_BYTE_ORDER == BIG_ENDIAN ? be_breakp : le_breakp;
int ii, insn;
CORE_ADDR loc;
CORE_ADDR breaks[2];
if (!one_stepped) {
loc = read_pc ();
- read_memory (loc, (char *) &insn, 4);
+ insn = read_memory_integer (loc, 4);
breaks[0] = loc + INSNLEN(insn);
opcode = insn >> 26;
}
-/* return pc value after skipping a function prologue. */
+/* return pc value after skipping a function prologue and also return
+ information about a function frame.
+
+ in struct rs6000_frameinfo fdata:
+ - frameless is TRUE, if function does not have a frame.
+ - nosavedpc is TRUE, if function does not save %pc value in its frame.
+ - offset is the number of bytes used in the frame to save registers.
+ - saved_gpr is the number of the first saved gpr.
+ - saved_fpr is the number of the first saved fpr.
+ - alloca_reg is the number of the register used for alloca() handling.
+ Otherwise -1.
+ - gpr_offset is the offset of the saved gprs
+ - fpr_offset is the offset of the saved fprs
+ - lr_offset is the offset of the saved lr
+ - cr_offset is the offset of the saved cr
+ */
+
+#define SIGNED_SHORT(x) \
+ ((sizeof (short) == 2) \
+ ? ((int)(short)(x)) \
+ : ((int)((((x) & 0xffff) ^ 0x8000) - 0x8000)))
-skip_prologue (pc)
-CORE_ADDR pc;
+#define GET_SRC_REG(x) (((x) >> 21) & 0x1f)
+
+CORE_ADDR
+skip_prologue (pc, fdata)
+ CORE_ADDR pc;
+ struct rs6000_framedata *fdata;
{
+ CORE_ADDR orig_pc = pc;
char buf[4];
- unsigned int tmp;
unsigned long op;
+ long offset = 0;
+ int lr_reg = 0;
+ int cr_reg = 0;
+ int reg;
+ int framep = 0;
+ int minimal_toc_loaded = 0;
+ static struct rs6000_framedata zero_frame;
+
+ *fdata = zero_frame;
+ fdata->saved_gpr = -1;
+ fdata->saved_fpr = -1;
+ fdata->alloca_reg = -1;
+ fdata->frameless = 1;
+ fdata->nosavedpc = 1;
if (target_read_memory (pc, buf, 4))
return pc; /* Can't access it -- assume no prologue. */
- op = extract_unsigned_integer (buf, 4);
/* Assume that subsequent fetches can fail with low probability. */
-
- if (op == 0x7c0802a6) { /* mflr r0 */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- if ((op & 0xfc00003e) == 0x7c000026) { /* mfcr Rx */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- if ((op & 0xfc000000) == 0x48000000) { /* bl foo, to save fprs??? */
- pc += 4;
- op = read_memory_integer (pc, 4);
-
- /* At this point, make sure this is not a trampoline function
- (a function that simply calls another functions, and nothing else).
- If the next is not a nop, this branch was part of the function
- prologue. */
-
- if (op == 0x4def7b82 || /* crorc 15, 15, 15 */
- op == 0x0)
- return pc - 4; /* don't skip over this branch */
- }
-
- if ((op & 0xfc1f0000) == 0xd8010000) { /* stfd Rx,NUM(r1) */
- pc += 4; /* store floating register double */
- op = read_memory_integer (pc, 4);
- }
-
- if ((op & 0xfc1f0000) == 0xbc010000) { /* stm Rx, NUM(r1) */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- while (((tmp = op >> 16) == 0x9001) || /* st r0, NUM(r1) */
- (tmp == 0x9421) || /* stu r1, NUM(r1) */
- (tmp == 0x93e1)) /* st r31,NUM(r1) */
- {
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- while ((tmp = (op >> 22)) == 0x20f) { /* l r31, ... or */
- pc += 4; /* l r30, ... */
- op = read_memory_integer (pc, 4);
- }
-
- /* store parameters into stack */
- while(
- (op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
- (op & 0xfc1f0000) == 0x90010000 || /* st r?, NUM(r1) */
- (op & 0xfc000000) == 0xfc000000 || /* frsp, fp?, .. */
- (op & 0xd0000000) == 0xd0000000) /* stfs, fp?, .. */
+ pc -= 4;
+ for (;;)
{
- pc += 4; /* store fpr double */
+ pc += 4;
op = read_memory_integer (pc, 4);
- }
- if (op == 0x603f0000 /* oril r31, r1, 0x0 */
- || op == 0x7c3f0b78) { /* mr r31, r1 */
- pc += 4; /* this happens if r31 is used as */
- op = read_memory_integer (pc, 4); /* frame ptr. (gcc does that) */
+ if ((op & 0xfc1fffff) == 0x7c0802a6) { /* mflr Rx */
+ lr_reg = (op & 0x03e00000) | 0x90010000;
+ continue;
+
+ } else if ((op & 0xfc1fffff) == 0x7c000026) { /* mfcr Rx */
+ cr_reg = (op & 0x03e00000) | 0x90010000;
+ continue;
+
+ } else if ((op & 0xfc1f0000) == 0xd8010000) { /* stfd Rx,NUM(r1) */
+ reg = GET_SRC_REG (op);
+ if (fdata->saved_fpr == -1 || fdata->saved_fpr > reg) {
+ fdata->saved_fpr = reg;
+ fdata->fpr_offset = SIGNED_SHORT (op) + offset;
+ }
+ continue;
+
+ } else if (((op & 0xfc1f0000) == 0xbc010000) || /* stm Rx, NUM(r1) */
+ ((op & 0xfc1f0000) == 0x90010000 && /* st rx,NUM(r1), rx >= r13 */
+ (op & 0x03e00000) >= 0x01a00000)) {
+
+ reg = GET_SRC_REG (op);
+ if (fdata->saved_gpr == -1 || fdata->saved_gpr > reg) {
+ fdata->saved_gpr = reg;
+ fdata->gpr_offset = SIGNED_SHORT (op) + offset;
+ }
+ continue;
+
+ } else if ((op & 0xffff0000) == 0x3c000000) { /* addis 0,0,NUM, used for >= 32k frames */
+ fdata->offset = (op & 0x0000ffff) << 16;
+ fdata->frameless = 0;
+ continue;
+
+ } else if ((op & 0xffff0000) == 0x60000000) { /* ori 0,0,NUM, 2nd half of >= 32k frames */
+ fdata->offset |= (op & 0x0000ffff);
+ fdata->frameless = 0;
+ continue;
+
+ } else if ((op & 0xffff0000) == lr_reg) { /* st Rx,NUM(r1) where Rx == lr */
+ fdata->lr_offset = SIGNED_SHORT (op) + offset;
+ fdata->nosavedpc = 0;
+ lr_reg = 0;
+ continue;
+
+ } else if ((op & 0xffff0000) == cr_reg) { /* st Rx,NUM(r1) where Rx == cr */
+ fdata->cr_offset = SIGNED_SHORT (op) + offset;
+ cr_reg = 0;
+ continue;
+
+ } else if (op == 0x48000005) { /* bl .+4 used in -mrelocatable */
+ continue;
+
+ } else if (op == 0x48000004) { /* b .+4 (xlc) */
+ break;
- tmp = 0;
- while ((op >> 16) == (0x907f + tmp)) { /* st r3, NUM(r31) */
- pc += 4; /* st r4, NUM(r31), ... */
- op = read_memory_integer (pc, 4);
- tmp += 0x20;
+ } else if (((op & 0xffff0000) == 0x801e0000 || /* lwz 0,NUM(r30), used in V.4 -mrelocatable */
+ op == 0x7fc0f214) && /* add r30,r0,r30, used in V.4 -mrelocatable */
+ lr_reg == 0x901e0000) {
+ continue;
+
+ } else if ((op & 0xffff0000) == 0x3fc00000 || /* addis 30,0,foo@ha, used in V.4 -mminimal-toc */
+ (op & 0xffff0000) == 0x3bde0000) { /* addi 30,30,foo@l */
+ continue;
+
+ } else if ((op & 0xfc000000) == 0x48000000) { /* bl foo, to save fprs??? */
+
+ fdata->frameless = 0;
+ /* Don't skip over the subroutine call if it is not within the first
+ three instructions of the prologue. */
+ if ((pc - orig_pc) > 8)
+ break;
+
+ op = read_memory_integer (pc+4, 4);
+
+ /* At this point, make sure this is not a trampoline function
+ (a function that simply calls another functions, and nothing else).
+ If the next is not a nop, this branch was part of the function
+ prologue. */
+
+ if (op == 0x4def7b82 || op == 0) /* crorc 15, 15, 15 */
+ break; /* don't skip over this branch */
+
+ continue;
+
+ /* update stack pointer */
+ } else if ((op & 0xffff0000) == 0x94210000) { /* stu r1,NUM(r1) */
+ fdata->frameless = 0;
+ fdata->offset = SIGNED_SHORT (op);
+ offset = fdata->offset;
+ continue;
+
+ } else if (op == 0x7c21016e) { /* stwux 1,1,0 */
+ fdata->frameless = 0;
+ offset = fdata->offset;
+ continue;
+
+ /* Load up minimal toc pointer */
+ } else if ((op >> 22) == 0x20f
+ && ! minimal_toc_loaded) { /* l r31,... or l r30,... */
+ minimal_toc_loaded = 1;
+ continue;
+
+ /* store parameters in stack */
+ } else if ((op & 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */
+ (op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
+ (op & 0xfc1f0000) == 0xfc010000) { /* frsp, fp?,NUM(r1) */
+ continue;
+
+ /* store parameters in stack via frame pointer */
+ } else if (framep &&
+ ((op & 0xfc1f0000) == 0x901f0000 || /* st rx,NUM(r1) */
+ (op & 0xfc1f0000) == 0xd81f0000 || /* stfd Rx,NUM(r1) */
+ (op & 0xfc1f0000) == 0xfc1f0000)) { /* frsp, fp?,NUM(r1) */
+ continue;
+
+ /* Set up frame pointer */
+ } else if (op == 0x603f0000 /* oril r31, r1, 0x0 */
+ || op == 0x7c3f0b78) { /* mr r31, r1 */
+ fdata->frameless = 0;
+ framep = 1;
+ fdata->alloca_reg = 31;
+ continue;
+
+ /* Another way to set up the frame pointer. */
+ } else if ((op & 0xfc1fffff) == 0x38010000) { /* addi rX, r1, 0x0 */
+ fdata->frameless = 0;
+ framep = 1;
+ fdata->alloca_reg = (op & ~0x38010000) >> 21;
+ continue;
+
+ } else {
+ break;
+ }
}
- }
+
#if 0
/* I have problems with skipping over __main() that I need to address
* sometime. Previously, I used to use misc_function_vector which
}
#endif /* 0 */
+ fdata->offset = - fdata->offset;
return pc;
}
{
/* stack pointer. */
CORE_ADDR sp;
+ /* Same thing, target byte order. */
+ char sp_targ[4];
/* link register. */
CORE_ADDR pc;
/* Same thing, target byte order. */
char pc_targ[4];
+ /* Needed to figure out where to save the dummy link area.
+ FIXME: There should be an easier way to do this, no? tiemann 9/9/95. */
+ struct rs6000_framedata fdata;
+
int ii;
target_fetch_registers (-1);
sp = read_register(SP_REGNUM);
pc = read_register(PC_REGNUM);
- memcpy (pc_targ, (char *) &pc, 4);
+ store_address (pc_targ, 4, pc);
+
+ (void) skip_prologue (get_pc_function_start (pc) + FUNCTION_START_OFFSET, &fdata);
dummy_frame_addr [dummy_frame_count++] = sp;
before writing register values into the new frame, decrement and update
%sp first in order to secure your frame. */
+ /* FIXME: We don't check if the stack really has this much space.
+ This is a problem on the ppc simulator (which only grants one page
+ (4096 bytes) by default. */
+
write_register (SP_REGNUM, sp-DUMMY_FRAME_SIZE);
/* gdb relies on the state of current_frame. We'd better update it,
flush_cached_frames ();
/* save program counter in link register's space. */
- write_memory (sp+8, pc_targ, 4);
+ write_memory (sp + (fdata.lr_offset ? fdata.lr_offset : DEFAULT_LR_SAVE),
+ pc_targ, 4);
/* save all floating point and general purpose registers here. */
}
/* Save sp or so called back chain right here. */
- write_memory (sp-DUMMY_FRAME_SIZE, (char *)&sp, 4);
+ store_address (sp_targ, 4, sp);
+ write_memory (sp-DUMMY_FRAME_SIZE, sp_targ, 4);
sp -= DUMMY_FRAME_SIZE;
/* And finally, this is the back chain. */
GDB process that keeps track of these dummy frames! -- gnu@cygnus.com Aug92
*/
+static void
pop_dummy_frame ()
{
CORE_ADDR sp, pc;
®isters[REGISTER_BYTE (FPLAST_REGNUM + ii)], 4);
read_memory (sp-(DUMMY_FRAME_SIZE-8),
- ®isters [REGISTER_BYTE(PC_REGNUM)], 4);
+ ®isters [REGISTER_BYTE(PC_REGNUM)], 4);
/* when a dummy frame was being pushed, we had to decrement %sp first, in
order to secure astack space. Thus, saved %sp (or %r1) value, is not the
pop_frame ()
{
CORE_ADDR pc, lr, sp, prev_sp; /* %pc, %lr, %sp */
- struct aix_framedata fdata;
+ struct rs6000_framedata fdata;
struct frame_info *frame = get_current_frame ();
int addr, ii;
saved %pc value in the previous frame. */
addr = get_pc_function_start (frame->pc) + FUNCTION_START_OFFSET;
- function_frame_info (addr, &fdata);
+ (void) skip_prologue (addr, &fdata);
if (fdata.frameless)
prev_sp = sp;
else
prev_sp = read_memory_integer (sp, 4);
- if (fdata.nosavedpc)
+ if (fdata.lr_offset == 0)
lr = read_register (LR_REGNUM);
else
- lr = read_memory_integer (prev_sp+8, 4);
+ lr = read_memory_integer (prev_sp + fdata.lr_offset, 4);
/* reset %pc value. */
write_register (PC_REGNUM, lr);
its argumets will be passed by gdb. */
void
-fix_call_dummy(dummyname, pc, fun, nargs, type)
- char *dummyname;
- CORE_ADDR pc;
- CORE_ADDR fun;
- int nargs; /* not used */
- int type; /* not used */
+rs6000_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p)
+ char *dummyname;
+ CORE_ADDR pc;
+ CORE_ADDR fun;
+ int nargs;
+ value_ptr *args;
+ struct type *type;
+ int gcc_p;
{
#define TOC_ADDR_OFFSET 20
#define TARGET_ADDR_OFFSET 28
*(int*)((char*)dummyname + TARGET_ADDR_OFFSET+4) = ii;
}
-
-/* return information about a function frame.
- in struct aix_frameinfo fdata:
- - frameless is TRUE, if function does not have a frame.
- - nosavedpc is TRUE, if function does not save %pc value in its frame.
- - offset is the number of bytes used in the frame to save registers.
- - saved_gpr is the number of the first saved gpr.
- - saved_fpr is the number of the first saved fpr.
- - alloca_reg is the number of the register used for alloca() handling.
- Otherwise -1.
- */
-void
-function_frame_info (pc, fdata)
- CORE_ADDR pc;
- struct aix_framedata *fdata;
-{
- unsigned int tmp;
- register unsigned int op;
- char buf[4];
-
- fdata->offset = 0;
- fdata->saved_gpr = fdata->saved_fpr = fdata->alloca_reg = -1;
- fdata->frameless = 1;
-
- /* Do not error out if we can't access the instructions. */
- if (target_read_memory (pc, buf, 4))
- return;
- op = extract_unsigned_integer (buf, 4);
- if (op == 0x7c0802a6) { /* mflr r0 */
- pc += 4;
- op = read_memory_integer (pc, 4);
- fdata->nosavedpc = 0;
- fdata->frameless = 0;
- }
- else /* else, pc is not saved */
- fdata->nosavedpc = 1;
-
- if ((op & 0xfc00003e) == 0x7c000026) { /* mfcr Rx */
- pc += 4;
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
-
- if ((op & 0xfc000000) == 0x48000000) { /* bl foo, to save fprs??? */
- pc += 4;
- op = read_memory_integer (pc, 4);
- /* At this point, make sure this is not a trampoline function
- (a function that simply calls another functions, and nothing else).
- If the next is not a nop, this branch was part of the function
- prologue. */
-
- if (op == 0x4def7b82 || /* crorc 15, 15, 15 */
- op == 0x0)
- return; /* prologue is over */
- fdata->frameless = 0;
- }
-
- if ((op & 0xfc1f0000) == 0xd8010000) { /* stfd Rx,NUM(r1) */
- pc += 4; /* store floating register double */
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
-
- if ((op & 0xfc1f0000) == 0xbc010000) { /* stm Rx, NUM(r1) */
- int tmp2;
- fdata->saved_gpr = (op >> 21) & 0x1f;
- tmp2 = op & 0xffff;
- if (tmp2 > 0x7fff)
- tmp2 = (~0 &~ 0xffff) | tmp2;
-
- if (tmp2 < 0) {
- tmp2 = tmp2 * -1;
- fdata->saved_fpr = (tmp2 - ((32 - fdata->saved_gpr) * 4)) / 8;
- if ( fdata->saved_fpr > 0)
- fdata->saved_fpr = 32 - fdata->saved_fpr;
- else
- fdata->saved_fpr = -1;
- }
- fdata->offset = tmp2;
- pc += 4;
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
-
- while (((tmp = op >> 16) == 0x9001) || /* st r0, NUM(r1) */
- (tmp == 0x9421) || /* stu r1, NUM(r1) */
- (tmp == 0x93e1)) /* st r31, NUM(r1) */
- {
- int tmp2;
-
- /* gcc takes a short cut and uses this instruction to save r31 only. */
-
- if (tmp == 0x93e1) {
- if (fdata->offset)
-/* fatal ("Unrecognized prolog."); */
- printf_unfiltered ("Unrecognized prolog!\n");
-
- fdata->saved_gpr = 31;
- tmp2 = op & 0xffff;
- if (tmp2 > 0x7fff) {
- tmp2 = - ((~0 &~ 0xffff) | tmp2);
- fdata->saved_fpr = (tmp2 - ((32 - 31) * 4)) / 8;
- if ( fdata->saved_fpr > 0)
- fdata->saved_fpr = 32 - fdata->saved_fpr;
- else
- fdata->saved_fpr = -1;
- }
- fdata->offset = tmp2;
- }
- pc += 4;
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
-
- while ((tmp = (op >> 22)) == 0x20f) { /* l r31, ... or */
- pc += 4; /* l r30, ... */
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
-
- /* store parameters into stack */
- while(
- (op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
- (op & 0xfc1f0000) == 0x90010000 || /* st r?, NUM(r1) */
- (op & 0xfc000000) == 0xfc000000 || /* frsp, fp?, .. */
- (op & 0xd0000000) == 0xd0000000) /* stfs, fp?, .. */
- {
- pc += 4; /* store fpr double */
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
-
- if (op == 0x603f0000 /* oril r31, r1, 0x0 */
- || op == 0x7c3f0b78) /* mr r31, r1 */
- {
- fdata->alloca_reg = 31;
- fdata->frameless = 0;
- }
-}
-
-
-/* Pass the arguments in either registers, or in the stack. In RS6000, the first
- eight words of the argument list (that might be less than eight parameters if
- some parameters occupy more than one word) are passed in r3..r11 registers.
- float and double parameters are passed in fpr's, in addition to that. Rest of
- the parameters if any are passed in user stack. There might be cases in which
- half of the parameter is copied into registers, the other half is pushed into
+/* Pass the arguments in either registers, or in the stack. In RS6000,
+ the first eight words of the argument list (that might be less than
+ eight parameters if some parameters occupy more than one word) are
+ passed in r3..r11 registers. float and double parameters are
+ passed in fpr's, in addition to that. Rest of the parameters if any
+ are passed in user stack. There might be cases in which half of the
+ parameter is copied into registers, the other half is pushed into
stack.
If the function is returning a structure, then the return address is passed
- in r3, then the first 7 words of the parametes can be passed in registers,
+ in r3, then the first 7 words of the parameters can be passed in registers,
starting from r4. */
CORE_ADDR
push_arguments (nargs, args, sp, struct_return, struct_addr)
- int nargs;
- value_ptr *args;
- CORE_ADDR sp;
- int struct_return;
- CORE_ADDR struct_addr;
+ int nargs;
+ value_ptr *args;
+ CORE_ADDR sp;
+ int struct_return;
+ CORE_ADDR struct_addr;
{
- int ii, len;
+ int ii;
+ int len = 0;
int argno; /* current argument number */
int argbytes; /* current argument byte */
char tmp_buffer [50];
- value_ptr arg;
int f_argno = 0; /* current floating point argno */
+ value_ptr arg = 0;
+ struct type *type;
- CORE_ADDR saved_sp, pc;
+ CORE_ADDR saved_sp;
if ( dummy_frame_count <= 0)
printf_unfiltered ("FATAL ERROR -push_arguments()! frame not found!!\n");
for (argno=0, argbytes=0; argno < nargs && ii<8; ++ii) {
arg = args[argno];
- len = TYPE_LENGTH (VALUE_TYPE (arg));
+ type = check_typedef (VALUE_TYPE (arg));
+ len = TYPE_LENGTH (type);
- if (TYPE_CODE (VALUE_TYPE (arg)) == TYPE_CODE_FLT) {
+ if (TYPE_CODE (type) == TYPE_CODE_FLT) {
/* floating point arguments are passed in fpr's, as well as gpr's.
There are 13 fpr's reserved for passing parameters. At this point
if ((argno < nargs) || argbytes) {
int space = 0, jj;
- value_ptr val;
if (argbytes) {
space += ((len - argbytes + 3) & -4);
jj = argno;
for (; jj < nargs; ++jj) {
- val = args[jj];
+ value_ptr val = args[jj];
space += ((TYPE_LENGTH (VALUE_TYPE (val))) + 3) & -4;
}
for (; argno < nargs; ++argno) {
arg = args[argno];
- len = TYPE_LENGTH (VALUE_TYPE (arg));
+ type = check_typedef (VALUE_TYPE (arg));
+ len = TYPE_LENGTH (type);
/* float types should be passed in fpr's, as well as in the stack. */
- if (TYPE_CODE (VALUE_TYPE (arg)) == TYPE_CODE_FLT && f_argno < 13) {
+ if (TYPE_CODE (type) == TYPE_CODE_FLT && f_argno < 13) {
if (len > 8)
printf_unfiltered (
read_memory (saved_sp, tmp_buffer, 24);
write_memory (sp, tmp_buffer, 24);
- write_memory (sp, (char *)&saved_sp, 4); /* set back chain properly */
+ /* set back chain properly */
+ store_address (tmp_buffer, 4, saved_sp);
+ write_memory (sp, tmp_buffer, 4);
target_store_registers (-1);
return sp;
void
extract_return_value (valtype, regbuf, valbuf)
- struct type *valtype;
- char regbuf[REGISTER_BYTES];
- char *valbuf;
+ struct type *valtype;
+ char regbuf[REGISTER_BYTES];
+ char *valbuf;
{
+ int offset = 0;
if (TYPE_CODE (valtype) == TYPE_CODE_FLT) {
memcpy (valbuf, &ff, sizeof(float));
}
}
- else
+ else {
/* return value is copied starting from r3. */
- memcpy (valbuf, ®buf[REGISTER_BYTE (3)], TYPE_LENGTH (valtype));
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN
+ && TYPE_LENGTH (valtype) < REGISTER_RAW_SIZE (3))
+ offset = REGISTER_RAW_SIZE (3) - TYPE_LENGTH (valtype);
+
+ memcpy (valbuf, regbuf + REGISTER_BYTE (3) + offset,
+ TYPE_LENGTH (valtype));
+ }
}
CORE_ADDR
skip_trampoline_code (pc)
-CORE_ADDR pc;
+ CORE_ADDR pc;
{
register unsigned int ii, op;
CORE_ADDR solib_target_pc;
return pc;
}
-
-/* Determines whether the function FI has a frame on the stack or not.
- Called from the FRAMELESS_FUNCTION_INVOCATION macro in tm.h with a
- second argument of 0, and from the FRAME_SAVED_PC macro with a
- second argument of 1. */
+/* Determines whether the function FI has a frame on the stack or not. */
int
-frameless_function_invocation (fi, pcsaved)
-struct frame_info *fi;
-int pcsaved;
+frameless_function_invocation (fi)
+ struct frame_info *fi;
{
CORE_ADDR func_start;
- struct aix_framedata fdata;
+ struct rs6000_framedata fdata;
if (fi->next != NULL)
/* Don't even think about framelessness except on the innermost frame. */
if (!func_start)
return 0;
- function_frame_info (func_start, &fdata);
- return pcsaved ? fdata.nosavedpc : fdata.frameless;
+ (void) skip_prologue (func_start, &fdata);
+ return fdata.frameless;
}
+/* Return the PC saved in a frame */
+
+unsigned long
+frame_saved_pc (fi)
+ struct frame_info *fi;
+{
+ CORE_ADDR func_start;
+ struct rs6000_framedata fdata;
+
+ if (fi->signal_handler_caller)
+ return read_memory_integer (fi->frame + SIG_FRAME_PC_OFFSET, 4);
+
+ func_start = get_pc_function_start (fi->pc) + FUNCTION_START_OFFSET;
+
+ /* If we failed to find the start of the function, it is a mistake
+ to inspect the instructions. */
+ if (!func_start)
+ return 0;
+
+ (void) skip_prologue (func_start, &fdata);
+
+ if (fdata.lr_offset == 0 && fi->next != NULL)
+ return read_memory_integer (rs6000_frame_chain (fi) + DEFAULT_LR_SAVE, 4);
+
+ if (fdata.lr_offset == 0)
+ return read_register (LR_REGNUM);
+
+ return read_memory_integer (rs6000_frame_chain (fi) + fdata.lr_offset, 4);
+}
/* If saved registers of frame FI are not known yet, read and cache them.
- &FDATAP contains aix_framedata; TDATAP can be NULL,
+ &FDATAP contains rs6000_framedata; TDATAP can be NULL,
in which case the framedata are read. */
static void
frame_get_cache_fsr (fi, fdatap)
struct frame_info *fi;
- struct aix_framedata *fdatap;
+ struct rs6000_framedata *fdatap;
{
int ii;
CORE_ADDR frame_addr;
- struct aix_framedata work_fdata;
+ struct rs6000_framedata work_fdata;
if (fi->cache_fsr)
return;
if (fdatap == NULL) {
fdatap = &work_fdata;
- function_frame_info (get_pc_function_start (fi->pc), fdatap);
+ (void) skip_prologue (get_pc_function_start (fi->pc), fdatap);
}
fi->cache_fsr = (struct frame_saved_regs *)
frame_addr = read_memory_integer (fi->frame, 4);
/* if != -1, fdatap->saved_fpr is the smallest number of saved_fpr.
- All fpr's from saved_fpr to fp31 are saved right underneath caller
- stack pointer, starting from fp31 first. */
+ All fpr's from saved_fpr to fp31 are saved. */
if (fdatap->saved_fpr >= 0) {
- for (ii=31; ii >= fdatap->saved_fpr; --ii)
- fi->cache_fsr->regs [FP0_REGNUM + ii] = frame_addr - ((32 - ii) * 8);
- frame_addr -= (32 - fdatap->saved_fpr) * 8;
+ int fpr_offset = frame_addr + fdatap->fpr_offset;
+ for (ii = fdatap->saved_fpr; ii < 32; ii++) {
+ fi->cache_fsr->regs [FP0_REGNUM + ii] = fpr_offset;
+ fpr_offset += 8;
+ }
}
/* if != -1, fdatap->saved_gpr is the smallest number of saved_gpr.
- All gpr's from saved_gpr to gpr31 are saved right under saved fprs,
- starting from r31 first. */
+ All gpr's from saved_gpr to gpr31 are saved. */
- if (fdatap->saved_gpr >= 0)
- for (ii=31; ii >= fdatap->saved_gpr; --ii)
- fi->cache_fsr->regs [ii] = frame_addr - ((32 - ii) * 4);
+ if (fdatap->saved_gpr >= 0) {
+ int gpr_offset = frame_addr + fdatap->gpr_offset;
+ for (ii = fdatap->saved_gpr; ii < 32; ii++) {
+ fi->cache_fsr->regs [ii] = gpr_offset;
+ gpr_offset += 4;
+ }
+ }
+
+ /* If != 0, fdatap->cr_offset is the offset from the frame that holds
+ the CR. */
+ if (fdatap->cr_offset != 0)
+ fi->cache_fsr->regs [CR_REGNUM] = frame_addr + fdatap->cr_offset;
+
+ /* If != 0, fdatap->lr_offset is the offset from the frame that holds
+ the LR. */
+ if (fdatap->lr_offset != 0)
+ fi->cache_fsr->regs [LR_REGNUM] = frame_addr + fdatap->lr_offset;
}
/* Return the address of a frame. This is the inital %sp value when the frame
struct frame_info *fi;
{
CORE_ADDR tmpaddr;
- struct aix_framedata fdata;
+ struct rs6000_framedata fdata;
struct frame_info *callee_fi;
/* if the initial stack pointer (frame address) of this frame is known,
/* find out if this function is using an alloca register.. */
- function_frame_info (get_pc_function_start (fi->pc), &fdata);
+ (void) skip_prologue (get_pc_function_start (fi->pc), &fdata);
/* if saved registers of this frame are not known yet, read and cache them. */
/* FIXME -- this is never called! */
+#if 0
void
free_loadinfo ()
{
loadinfotocindex = 0;
loadinfotextindex = 0;
}
+#endif
/* this is called from xcoffread.c */
void
-xcoff_add_toc_to_loadinfo (unsigned long tocoff)
+xcoff_add_toc_to_loadinfo (tocoff)
+ unsigned long tocoff;
{
while (loadinfotocindex >= loadinfolen) {
loadinfolen += LOADINFOLEN;
}
-/* FIXME: This assumes that the "textorg" and "dataorg" elements
- of a member of this array are correlated with the "toc_offset"
- element of the same member. But they are sequentially assigned in wildly
- different places, and probably there is no correlation. FIXME! */
+/* Note that this assumes that the "textorg" and "dataorg" elements of
+ a member of this array are correlated with the "toc_offset" element
+ of the same member. This is taken care of because the loops which
+ assign the former (in xcoff_relocate_symtab or xcoff_relocate_core)
+ and the latter (in scan_xcoff_symtab, via vmap_symtab, in
+ vmap_ldinfo or xcoff_relocate_core) traverse the same objfiles in
+ the same order. */
static CORE_ADDR
find_toc_address (pc)
{
int ii, toc_entry, tocbase = 0;
+ toc_entry = -1;
for (ii=0; ii < loadinfotextindex; ++ii)
if (pc > loadinfo[ii].textorg && loadinfo[ii].textorg > tocbase) {
toc_entry = ii;
tocbase = loadinfo[ii].textorg;
}
+ if (toc_entry == -1)
+ error ("Unable to find TOC entry for pc 0x%x\n", pc);
return loadinfo[toc_entry].dataorg + loadinfo[toc_entry].toc_offset;
}
+/* Return nonzero if ADDR (a function pointer) is in the data space and
+ is therefore a special function pointer. */
+
+int
+is_magic_function_pointer (addr)
+ CORE_ADDR addr;
+{
+ struct obj_section *s;
+
+ s = find_pc_section (addr);
+ if (s && s->the_bfd_section->flags & SEC_CODE)
+ return 0;
+ else
+ return 1;
+}
+
+#ifdef GDB_TARGET_POWERPC
+int
+gdb_print_insn_powerpc (memaddr, info)
+ bfd_vma memaddr;
+ disassemble_info *info;
+{
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ return print_insn_big_powerpc (memaddr, info);
+ else
+ return print_insn_little_powerpc (memaddr, info);
+}
+#endif
+
void
_initialize_rs6000_tdep ()
{
+#ifndef ELF_OBJECT_FORMAT
+ {
+ extern void (*xcoff_add_toc_to_loadinfo_hook) PARAMS ((unsigned long));
+ extern void (*xcoff_init_loadinfo_hook) PARAMS ((void));
+
+ /* Initialize hook in xcoffread for recording the toc offset value
+ of a symbol table into the ldinfo structure, for native rs6000
+ config. */
+ xcoff_add_toc_to_loadinfo_hook = &xcoff_add_toc_to_loadinfo;
+
+ /* Initialize hook in xcoffread for calling xcoff_init_loadinfo in
+ a native rs6000 config. */
+ xcoff_init_loadinfo_hook = &xcoff_init_loadinfo;
+ }
+#endif /* ELF_OBJECT_FORMAT */
+
/* FIXME, this should not be decided via ifdef. */
#ifdef GDB_TARGET_POWERPC
- tm_print_insn = print_insn_big_powerpc;
+ tm_print_insn = gdb_print_insn_powerpc;
#else
tm_print_insn = print_insn_rs6000;
#endif