/* Target-dependent code for GDB, the GNU debugger.
- Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995
+ Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 2000
Free Software Foundation, Inc.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "frame.h"
#include "symtab.h"
#include "target.h"
#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "arch-utils.h"
-#include "xcoffsolib.h"
+#include "bfd/libbfd.h" /* for bfd_default_set_arch_mach */
+#include "coff/internal.h" /* for libcoff.h */
+#include "bfd/libcoff.h" /* for xcoff_data */
-#include <a.out.h>
+#include "elf-bfd.h"
-extern struct obstack frame_cache_obstack;
+#include "ppc-tdep.h"
-extern int errno;
+/* If the kernel has to deliver a signal, it pushes a sigcontext
+ structure on the stack and then calls the signal handler, passing
+ the address of the sigcontext in an argument register. Usually
+ the signal handler doesn't save this register, so we have to
+ access the sigcontext structure via an offset from the signal handler
+ frame.
+ The following constants were determined by experimentation on AIX 3.2. */
+#define SIG_FRAME_PC_OFFSET 96
+#define SIG_FRAME_LR_OFFSET 108
+#define SIG_FRAME_FP_OFFSET 284
-/* Nonzero if we just simulated a single step break. */
-int one_stepped;
+/* To be used by skip_prologue. */
+
+struct rs6000_framedata
+ {
+ int offset; /* total size of frame --- the distance
+ by which we decrement sp to allocate
+ the frame */
+ int saved_gpr; /* smallest # of saved gpr */
+ int saved_fpr; /* smallest # of saved fpr */
+ int alloca_reg; /* alloca register number (frame ptr) */
+ char frameless; /* true if frameless functions. */
+ char nosavedpc; /* true if pc not saved. */
+ int gpr_offset; /* offset of saved gprs from prev sp */
+ int fpr_offset; /* offset of saved fprs from prev sp */
+ int lr_offset; /* offset of saved lr */
+ int cr_offset; /* offset of saved cr */
+ };
+
+/* Description of a single register. */
+
+struct reg
+ {
+ char *name; /* name of register */
+ unsigned char sz32; /* size on 32-bit arch, 0 if nonextant */
+ unsigned char sz64; /* size on 64-bit arch, 0 if nonextant */
+ unsigned char fpr; /* whether register is floating-point */
+ };
+
+/* Private data that this module attaches to struct gdbarch. */
+
+struct gdbarch_tdep
+ {
+ int wordsize; /* size in bytes of fixed-point word */
+ int osabi; /* OS / ABI from ELF header */
+ int *regoff; /* byte offsets in register arrays */
+ const struct reg *regs; /* from current variant */
+ };
+
+/* Return the current architecture's gdbarch_tdep structure. */
+
+#define TDEP gdbarch_tdep (current_gdbarch)
/* Breakpoint shadows for the single step instructions will be kept here. */
-static struct sstep_breaks {
- /* Address, or 0 if this is not in use. */
- CORE_ADDR address;
- /* Shadow contents. */
- char data[4];
-} stepBreaks[2];
+static struct sstep_breaks
+ {
+ /* Address, or 0 if this is not in use. */
+ CORE_ADDR address;
+ /* Shadow contents. */
+ char data[4];
+ }
+stepBreaks[2];
+
+/* Hook for determining the TOC address when calling functions in the
+ inferior under AIX. The initialization code in rs6000-nat.c sets
+ this hook to point to find_toc_address. */
+
+CORE_ADDR (*rs6000_find_toc_address_hook) (CORE_ADDR) = NULL;
+
+/* Hook to set the current architecture when starting a child process.
+ rs6000-nat.c sets this. */
+
+void (*rs6000_set_host_arch_hook) (int) = NULL;
/* Static function prototypes */
+static CORE_ADDR branch_dest (int opcode, int instr, CORE_ADDR pc,
+ CORE_ADDR safety);
+static CORE_ADDR skip_prologue (CORE_ADDR, CORE_ADDR,
+ struct rs6000_framedata *);
+static void frame_get_saved_regs (struct frame_info * fi,
+ struct rs6000_framedata * fdatap);
+static CORE_ADDR frame_initial_stack_address (struct frame_info *);
+
+/* Read a LEN-byte address from debugged memory address MEMADDR. */
+
static CORE_ADDR
-find_toc_address PARAMS ((CORE_ADDR pc));
+read_memory_addr (CORE_ADDR memaddr, int len)
+{
+ return read_memory_unsigned_integer (memaddr, len);
+}
static CORE_ADDR
-branch_dest PARAMS ((int opcode, int instr, CORE_ADDR pc, CORE_ADDR safety));
+rs6000_skip_prologue (CORE_ADDR pc)
+{
+ struct rs6000_framedata frame;
+ pc = skip_prologue (pc, 0, &frame);
+ return pc;
+}
-static void
-frame_get_cache_fsr PARAMS ((struct frame_info *fi,
- struct aix_framedata *fdatap));
-/*
- * Calculate the destination of a branch/jump. Return -1 if not a branch.
- */
+/* Fill in fi->saved_regs */
+
+struct frame_extra_info
+{
+ /* Functions calling alloca() change the value of the stack
+ pointer. We need to use initial stack pointer (which is saved in
+ r31 by gcc) in such cases. If a compiler emits traceback table,
+ then we should use the alloca register specified in traceback
+ table. FIXME. */
+ CORE_ADDR initial_sp; /* initial stack pointer. */
+};
+
+void
+rs6000_init_extra_frame_info (int fromleaf, struct frame_info *fi)
+{
+ fi->extra_info = (struct frame_extra_info *)
+ frame_obstack_alloc (sizeof (struct frame_extra_info));
+ fi->extra_info->initial_sp = 0;
+ if (fi->next != (CORE_ADDR) 0
+ && fi->pc < TEXT_SEGMENT_BASE)
+ /* We're in get_prev_frame */
+ /* and this is a special signal frame. */
+ /* (fi->pc will be some low address in the kernel, */
+ /* to which the signal handler returns). */
+ fi->signal_handler_caller = 1;
+}
+
+/* Put here the code to store, into a struct frame_saved_regs,
+ the addresses of the saved registers of frame described by FRAME_INFO.
+ This includes special registers such as pc and fp saved in special
+ ways in the stack frame. sp is even more special:
+ the address we return for it IS the sp for the next frame. */
+
+/* In this implementation for RS/6000, we do *not* save sp. I am
+ not sure if it will be needed. The following function takes care of gpr's
+ and fpr's only. */
+
+void
+rs6000_frame_init_saved_regs (struct frame_info *fi)
+{
+ frame_get_saved_regs (fi, NULL);
+}
+
+static CORE_ADDR
+rs6000_frame_args_address (struct frame_info *fi)
+{
+ if (fi->extra_info->initial_sp != 0)
+ return fi->extra_info->initial_sp;
+ else
+ return frame_initial_stack_address (fi);
+}
+
+/* Immediately after a function call, return the saved pc.
+ Can't go through the frames for this because on some machines
+ the new frame is not set up until the new function executes
+ some instructions. */
+
static CORE_ADDR
-branch_dest (opcode, instr, pc, safety)
- int opcode;
- int instr;
- CORE_ADDR pc;
- CORE_ADDR safety;
+rs6000_saved_pc_after_call (struct frame_info *fi)
+{
+ return read_register (PPC_LR_REGNUM);
+}
+
+/* Calculate the destination of a branch/jump. Return -1 if not a branch. */
+
+static CORE_ADDR
+branch_dest (int opcode, int instr, CORE_ADDR pc, CORE_ADDR safety)
{
- register long offset;
CORE_ADDR dest;
int immediate;
int absolute;
absolute = (int) ((instr >> 1) & 1);
- switch (opcode) {
- case 18 :
- immediate = ((instr & ~3) << 6) >> 6; /* br unconditional */
- if (absolute)
- dest = immediate;
- else
- dest = pc + immediate;
- break;
+ switch (opcode)
+ {
+ case 18:
+ immediate = ((instr & ~3) << 6) >> 6; /* br unconditional */
+ if (absolute)
+ dest = immediate;
+ else
+ dest = pc + immediate;
+ break;
- case 16 :
- immediate = ((instr & ~3) << 16) >> 16; /* br conditional */
- if (absolute)
- dest = immediate;
- else
- dest = pc + immediate;
- break;
+ case 16:
+ immediate = ((instr & ~3) << 16) >> 16; /* br conditional */
+ if (absolute)
+ dest = immediate;
+ else
+ dest = pc + immediate;
+ break;
+
+ case 19:
+ ext_op = (instr >> 1) & 0x3ff;
+
+ if (ext_op == 16) /* br conditional register */
+ {
+ dest = read_register (PPC_LR_REGNUM) & ~3;
+
+ /* If we are about to return from a signal handler, dest is
+ something like 0x3c90. The current frame is a signal handler
+ caller frame, upon completion of the sigreturn system call
+ execution will return to the saved PC in the frame. */
+ if (dest < TEXT_SEGMENT_BASE)
+ {
+ struct frame_info *fi;
+
+ fi = get_current_frame ();
+ if (fi != NULL)
+ dest = read_memory_addr (fi->frame + SIG_FRAME_PC_OFFSET,
+ TDEP->wordsize);
+ }
+ }
+
+ else if (ext_op == 528) /* br cond to count reg */
+ {
+ dest = read_register (PPC_CTR_REGNUM) & ~3;
+
+ /* If we are about to execute a system call, dest is something
+ like 0x22fc or 0x3b00. Upon completion the system call
+ will return to the address in the link register. */
+ if (dest < TEXT_SEGMENT_BASE)
+ dest = read_register (PPC_LR_REGNUM) & ~3;
+ }
+ else
+ return -1;
+ break;
- case 19 :
- ext_op = (instr>>1) & 0x3ff;
+ default:
+ return -1;
+ }
+ return (dest < TEXT_SEGMENT_BASE) ? safety : dest;
+}
- if (ext_op == 16) /* br conditional register */
- dest = read_register (LR_REGNUM) & ~3;
- else if (ext_op == 528) /* br cond to count reg */
- {
- dest = read_register (CTR_REGNUM) & ~3;
+/* Sequence of bytes for breakpoint instruction. */
- /* If we are about to execute a system call, dest is something
- like 0x22fc or 0x3b00. Upon completion the system call
- will return to the address in the link register. */
- if (dest < TEXT_SEGMENT_BASE)
- dest = read_register (LR_REGNUM) & ~3;
- }
- else return -1;
- break;
-
- default: return -1;
- }
- return (dest < TEXT_SEGMENT_BASE) ? safety : dest;
-}
+#define BIG_BREAKPOINT { 0x7d, 0x82, 0x10, 0x08 }
+#define LITTLE_BREAKPOINT { 0x08, 0x10, 0x82, 0x7d }
+static unsigned char *
+rs6000_breakpoint_from_pc (CORE_ADDR *bp_addr, int *bp_size)
+{
+ static unsigned char big_breakpoint[] = BIG_BREAKPOINT;
+ static unsigned char little_breakpoint[] = LITTLE_BREAKPOINT;
+ *bp_size = 4;
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+ return big_breakpoint;
+ else
+ return little_breakpoint;
+}
/* AIX does not support PT_STEP. Simulate it. */
void
-single_step (signal)
- int signal;
+rs6000_software_single_step (unsigned int signal, int insert_breakpoints_p)
{
#define INSNLEN(OPCODE) 4
CORE_ADDR breaks[2];
int opcode;
- if (!one_stepped) {
- loc = read_pc ();
+ if (insert_breakpoints_p)
+ {
+
+ loc = read_pc ();
- insn = read_memory_integer (loc, 4);
+ insn = read_memory_integer (loc, 4);
- breaks[0] = loc + INSNLEN(insn);
- opcode = insn >> 26;
- breaks[1] = branch_dest (opcode, insn, loc, breaks[0]);
+ breaks[0] = loc + INSNLEN (insn);
+ opcode = insn >> 26;
+ breaks[1] = branch_dest (opcode, insn, loc, breaks[0]);
- /* Don't put two breakpoints on the same address. */
- if (breaks[1] == breaks[0])
- breaks[1] = -1;
+ /* Don't put two breakpoints on the same address. */
+ if (breaks[1] == breaks[0])
+ breaks[1] = -1;
- stepBreaks[1].address = 0;
+ stepBreaks[1].address = 0;
- for (ii=0; ii < 2; ++ii) {
+ for (ii = 0; ii < 2; ++ii)
+ {
- /* ignore invalid breakpoint. */
- if ( breaks[ii] == -1)
- continue;
+ /* ignore invalid breakpoint. */
+ if (breaks[ii] == -1)
+ continue;
- read_memory (breaks[ii], stepBreaks[ii].data, 4);
+ read_memory (breaks[ii], stepBreaks[ii].data, 4);
- write_memory (breaks[ii], breakp, 4);
- stepBreaks[ii].address = breaks[ii];
- }
+ write_memory (breaks[ii], breakp, 4);
+ stepBreaks[ii].address = breaks[ii];
+ }
- one_stepped = 1;
- } else {
+ }
+ else
+ {
- /* remove step breakpoints. */
- for (ii=0; ii < 2; ++ii)
- if (stepBreaks[ii].address != 0)
- write_memory
- (stepBreaks[ii].address, stepBreaks[ii].data, 4);
+ /* remove step breakpoints. */
+ for (ii = 0; ii < 2; ++ii)
+ if (stepBreaks[ii].address != 0)
+ write_memory
+ (stepBreaks[ii].address, stepBreaks[ii].data, 4);
- one_stepped = 0;
- }
+ }
errno = 0; /* FIXME, don't ignore errors! */
- /* What errors? {read,write}_memory call error(). */
+ /* What errors? {read,write}_memory call error(). */
}
-/* return pc value after skipping a function prologue. */
-
-skip_prologue (pc)
-CORE_ADDR pc;
-{
- char buf[4];
- unsigned int tmp;
- unsigned long op;
-
- if (target_read_memory (pc, buf, 4))
- return pc; /* Can't access it -- assume no prologue. */
- op = extract_unsigned_integer (buf, 4);
-
- /* Assume that subsequent fetches can fail with low probability. */
-
- if (op == 0x7c0802a6) { /* mflr r0 */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- if ((op & 0xfc00003e) == 0x7c000026) { /* mfcr Rx */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- if ((op & 0xfc000000) == 0x48000000) { /* bl foo, to save fprs??? */
- pc += 4;
- op = read_memory_integer (pc, 4);
-
- /* At this point, make sure this is not a trampoline function
- (a function that simply calls another functions, and nothing else).
- If the next is not a nop, this branch was part of the function
- prologue. */
+/* return pc value after skipping a function prologue and also return
+ information about a function frame.
+
+ in struct rs6000_framedata fdata:
+ - frameless is TRUE, if function does not have a frame.
+ - nosavedpc is TRUE, if function does not save %pc value in its frame.
+ - offset is the initial size of this stack frame --- the amount by
+ which we decrement the sp to allocate the frame.
+ - saved_gpr is the number of the first saved gpr.
+ - saved_fpr is the number of the first saved fpr.
+ - alloca_reg is the number of the register used for alloca() handling.
+ Otherwise -1.
+ - gpr_offset is the offset of the first saved gpr from the previous frame.
+ - fpr_offset is the offset of the first saved fpr from the previous frame.
+ - lr_offset is the offset of the saved lr
+ - cr_offset is the offset of the saved cr
+ */
- if (op == 0x4def7b82 || /* crorc 15, 15, 15 */
- op == 0x0)
- return pc - 4; /* don't skip over this branch */
- }
+#define SIGNED_SHORT(x) \
+ ((sizeof (short) == 2) \
+ ? ((int)(short)(x)) \
+ : ((int)((((x) & 0xffff) ^ 0x8000) - 0x8000)))
- if ((op & 0xfc1f0000) == 0xd8010000) { /* stfd Rx,NUM(r1) */
- pc += 4; /* store floating register double */
- op = read_memory_integer (pc, 4);
- }
+#define GET_SRC_REG(x) (((x) >> 21) & 0x1f)
- if ((op & 0xfc1f0000) == 0xbc010000) { /* stm Rx, NUM(r1) */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
+/* Limit the number of skipped non-prologue instructions, as the examining
+ of the prologue is expensive. */
+static int max_skip_non_prologue_insns = 10;
- while ((op & 0xfc1f0000) == 0x90010000 && /* st rx,NUM(r1), rx >= r13 */
- (op & 0x03e00000) >= 0x01a00000) {
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
+/* Given PC representing the starting address of a function, and
+ LIM_PC which is the (sloppy) limit to which to scan when looking
+ for a prologue, attempt to further refine this limit by using
+ the line data in the symbol table. If successful, a better guess
+ on where the prologue ends is returned, otherwise the previous
+ value of lim_pc is returned. */
+static CORE_ADDR
+refine_prologue_limit (CORE_ADDR pc, CORE_ADDR lim_pc)
+{
+ struct symtab_and_line prologue_sal;
- if (op == 0x90010008) { /* st r0,8(r1) */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
+ prologue_sal = find_pc_line (pc, 0);
+ if (prologue_sal.line != 0)
+ {
+ int i;
+ CORE_ADDR addr = prologue_sal.end;
+
+ /* Handle the case in which compiler's optimizer/scheduler
+ has moved instructions into the prologue. We scan ahead
+ in the function looking for address ranges whose corresponding
+ line number is less than or equal to the first one that we
+ found for the function. (It can be less than when the
+ scheduler puts a body instruction before the first prologue
+ instruction.) */
+ for (i = 2 * max_skip_non_prologue_insns;
+ i > 0 && (lim_pc == 0 || addr < lim_pc);
+ i--)
+ {
+ struct symtab_and_line sal;
+
+ sal = find_pc_line (addr, 0);
+ if (sal.line == 0)
+ break;
+ if (sal.line <= prologue_sal.line
+ && sal.symtab == prologue_sal.symtab)
+ {
+ prologue_sal = sal;
+ }
+ addr = sal.end;
+ }
+
+ if (lim_pc == 0 || prologue_sal.end < lim_pc)
+ lim_pc = prologue_sal.end;
+ }
+ return lim_pc;
+}
- if (op == 0x91810004) { /* st r12,4(r1) */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
-
- if ((op & 0xffff0000) == 0x94210000) { /* stu r1,NUM(r1) */
- pc += 4;
- op = read_memory_integer (pc, 4);
- }
- while ((tmp = (op >> 22)) == 0x20f) { /* l r31, ... or */
- pc += 4; /* l r30, ... */
- op = read_memory_integer (pc, 4);
- }
+static CORE_ADDR
+skip_prologue (CORE_ADDR pc, CORE_ADDR lim_pc, struct rs6000_framedata *fdata)
+{
+ CORE_ADDR orig_pc = pc;
+ CORE_ADDR last_prologue_pc = pc;
+ char buf[4];
+ unsigned long op;
+ long offset = 0;
+ int lr_reg = -1;
+ int cr_reg = -1;
+ int reg;
+ int framep = 0;
+ int minimal_toc_loaded = 0;
+ int prev_insn_was_prologue_insn = 1;
+ int num_skip_non_prologue_insns = 0;
+
+ /* Attempt to find the end of the prologue when no limit is specified.
+ Note that refine_prologue_limit() has been written so that it may
+ be used to "refine" the limits of non-zero PC values too, but this
+ is only safe if we 1) trust the line information provided by the
+ compiler and 2) iterate enough to actually find the end of the
+ prologue.
+
+ It may become a good idea at some point (for both performance and
+ accuracy) to unconditionally call refine_prologue_limit(). But,
+ until we can make a clear determination that this is beneficial,
+ we'll play it safe and only use it to obtain a limit when none
+ has been specified. */
+ if (lim_pc == 0)
+ lim_pc = refine_prologue_limit (pc, lim_pc);
+
+ memset (fdata, 0, sizeof (struct rs6000_framedata));
+ fdata->saved_gpr = -1;
+ fdata->saved_fpr = -1;
+ fdata->alloca_reg = -1;
+ fdata->frameless = 1;
+ fdata->nosavedpc = 1;
- /* store parameters into stack */
- while(
- (op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
- (op & 0xfc1f0000) == 0x90010000 || /* st r?, NUM(r1) */
- (op & 0xfc000000) == 0xfc000000 || /* frsp, fp?, .. */
- (op & 0xd0000000) == 0xd0000000) /* stfs, fp?, .. */
+ for (;; pc += 4)
{
- pc += 4; /* store fpr double */
- op = read_memory_integer (pc, 4);
- }
+ /* Sometimes it isn't clear if an instruction is a prologue
+ instruction or not. When we encounter one of these ambiguous
+ cases, we'll set prev_insn_was_prologue_insn to 0 (false).
+ Otherwise, we'll assume that it really is a prologue instruction. */
+ if (prev_insn_was_prologue_insn)
+ last_prologue_pc = pc;
+
+ /* Stop scanning if we've hit the limit. */
+ if (lim_pc != 0 && pc >= lim_pc)
+ break;
- if (op == 0x603f0000 /* oril r31, r1, 0x0 */
- || op == 0x7c3f0b78) { /* mr r31, r1 */
- pc += 4; /* this happens if r31 is used as */
- op = read_memory_integer (pc, 4); /* frame ptr. (gcc does that) */
+ prev_insn_was_prologue_insn = 1;
- tmp = 0;
- while ((op >> 16) == (0x907f + tmp)) { /* st r3, NUM(r31) */
- pc += 4; /* st r4, NUM(r31), ... */
- op = read_memory_integer (pc, 4);
- tmp += 0x20;
+ /* Fetch the instruction and convert it to an integer. */
+ if (target_read_memory (pc, buf, 4))
+ break;
+ op = extract_signed_integer (buf, 4);
+
+ if ((op & 0xfc1fffff) == 0x7c0802a6)
+ { /* mflr Rx */
+ lr_reg = (op & 0x03e00000) | 0x90010000;
+ continue;
+
+ }
+ else if ((op & 0xfc1fffff) == 0x7c000026)
+ { /* mfcr Rx */
+ cr_reg = (op & 0x03e00000) | 0x90010000;
+ continue;
+
+ }
+ else if ((op & 0xfc1f0000) == 0xd8010000)
+ { /* stfd Rx,NUM(r1) */
+ reg = GET_SRC_REG (op);
+ if (fdata->saved_fpr == -1 || fdata->saved_fpr > reg)
+ {
+ fdata->saved_fpr = reg;
+ fdata->fpr_offset = SIGNED_SHORT (op) + offset;
+ }
+ continue;
+
+ }
+ else if (((op & 0xfc1f0000) == 0xbc010000) || /* stm Rx, NUM(r1) */
+ (((op & 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */
+ (op & 0xfc1f0003) == 0xf8010000) && /* std rx,NUM(r1) */
+ (op & 0x03e00000) >= 0x01a00000)) /* rx >= r13 */
+ {
+
+ reg = GET_SRC_REG (op);
+ if (fdata->saved_gpr == -1 || fdata->saved_gpr > reg)
+ {
+ fdata->saved_gpr = reg;
+ if ((op & 0xfc1f0003) == 0xf8010000)
+ op = (op >> 1) << 1;
+ fdata->gpr_offset = SIGNED_SHORT (op) + offset;
+ }
+ continue;
+
+ }
+ else if ((op & 0xffff0000) == 0x60000000)
+ {
+ /* nop */
+ /* Allow nops in the prologue, but do not consider them to
+ be part of the prologue unless followed by other prologue
+ instructions. */
+ prev_insn_was_prologue_insn = 0;
+ continue;
+
+ }
+ else if ((op & 0xffff0000) == 0x3c000000)
+ { /* addis 0,0,NUM, used
+ for >= 32k frames */
+ fdata->offset = (op & 0x0000ffff) << 16;
+ fdata->frameless = 0;
+ continue;
+
+ }
+ else if ((op & 0xffff0000) == 0x60000000)
+ { /* ori 0,0,NUM, 2nd ha
+ lf of >= 32k frames */
+ fdata->offset |= (op & 0x0000ffff);
+ fdata->frameless = 0;
+ continue;
+
+ }
+ else if (lr_reg != -1 && (op & 0xffff0000) == lr_reg)
+ { /* st Rx,NUM(r1)
+ where Rx == lr */
+ fdata->lr_offset = SIGNED_SHORT (op) + offset;
+ fdata->nosavedpc = 0;
+ lr_reg = 0;
+ continue;
+
+ }
+ else if (cr_reg != -1 && (op & 0xffff0000) == cr_reg)
+ { /* st Rx,NUM(r1)
+ where Rx == cr */
+ fdata->cr_offset = SIGNED_SHORT (op) + offset;
+ cr_reg = 0;
+ continue;
+
+ }
+ else if (op == 0x48000005)
+ { /* bl .+4 used in
+ -mrelocatable */
+ continue;
+
+ }
+ else if (op == 0x48000004)
+ { /* b .+4 (xlc) */
+ break;
+
+ }
+ else if (((op & 0xffff0000) == 0x801e0000 || /* lwz 0,NUM(r30), used
+ in V.4 -mrelocatable */
+ op == 0x7fc0f214) && /* add r30,r0,r30, used
+ in V.4 -mrelocatable */
+ lr_reg == 0x901e0000)
+ {
+ continue;
+
+ }
+ else if ((op & 0xffff0000) == 0x3fc00000 || /* addis 30,0,foo@ha, used
+ in V.4 -mminimal-toc */
+ (op & 0xffff0000) == 0x3bde0000)
+ { /* addi 30,30,foo@l */
+ continue;
+
+ }
+ else if ((op & 0xfc000001) == 0x48000001)
+ { /* bl foo,
+ to save fprs??? */
+
+ fdata->frameless = 0;
+ /* Don't skip over the subroutine call if it is not within the first
+ three instructions of the prologue. */
+ if ((pc - orig_pc) > 8)
+ break;
+
+ op = read_memory_integer (pc + 4, 4);
+
+ /* At this point, make sure this is not a trampoline function
+ (a function that simply calls another functions, and nothing else).
+ If the next is not a nop, this branch was part of the function
+ prologue. */
+
+ if (op == 0x4def7b82 || op == 0) /* crorc 15, 15, 15 */
+ break; /* don't skip over
+ this branch */
+ continue;
+
+ /* update stack pointer */
+ }
+ else if ((op & 0xffff0000) == 0x94210000 || /* stu r1,NUM(r1) */
+ (op & 0xffff0003) == 0xf8210001) /* stdu r1,NUM(r1) */
+ {
+ fdata->frameless = 0;
+ if ((op & 0xffff0003) == 0xf8210001)
+ op = (op >> 1) << 1;
+ fdata->offset = SIGNED_SHORT (op);
+ offset = fdata->offset;
+ continue;
+
+ }
+ else if (op == 0x7c21016e)
+ { /* stwux 1,1,0 */
+ fdata->frameless = 0;
+ offset = fdata->offset;
+ continue;
+
+ /* Load up minimal toc pointer */
+ }
+ else if ((op >> 22) == 0x20f
+ && !minimal_toc_loaded)
+ { /* l r31,... or l r30,... */
+ minimal_toc_loaded = 1;
+ continue;
+
+ /* move parameters from argument registers to local variable
+ registers */
+ }
+ else if ((op & 0xfc0007fe) == 0x7c000378 && /* mr(.) Rx,Ry */
+ (((op >> 21) & 31) >= 3) && /* R3 >= Ry >= R10 */
+ (((op >> 21) & 31) <= 10) &&
+ (((op >> 16) & 31) >= fdata->saved_gpr)) /* Rx: local var reg */
+ {
+ continue;
+
+ /* store parameters in stack */
+ }
+ else if ((op & 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */
+ (op & 0xfc1f0003) == 0xf8010000 || /* std rx,NUM(r1) */
+ (op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
+ (op & 0xfc1f0000) == 0xfc010000) /* frsp, fp?,NUM(r1) */
+ {
+ continue;
+
+ /* store parameters in stack via frame pointer */
+ }
+ else if (framep &&
+ ((op & 0xfc1f0000) == 0x901f0000 || /* st rx,NUM(r1) */
+ (op & 0xfc1f0000) == 0xd81f0000 || /* stfd Rx,NUM(r1) */
+ (op & 0xfc1f0000) == 0xfc1f0000))
+ { /* frsp, fp?,NUM(r1) */
+ continue;
+
+ /* Set up frame pointer */
+ }
+ else if (op == 0x603f0000 /* oril r31, r1, 0x0 */
+ || op == 0x7c3f0b78)
+ { /* mr r31, r1 */
+ fdata->frameless = 0;
+ framep = 1;
+ fdata->alloca_reg = 31;
+ continue;
+
+ /* Another way to set up the frame pointer. */
+ }
+ else if ((op & 0xfc1fffff) == 0x38010000)
+ { /* addi rX, r1, 0x0 */
+ fdata->frameless = 0;
+ framep = 1;
+ fdata->alloca_reg = (op & ~0x38010000) >> 21;
+ continue;
+
+ }
+ else
+ {
+ /* Not a recognized prologue instruction.
+ Handle optimizer code motions into the prologue by continuing
+ the search if we have no valid frame yet or if the return
+ address is not yet saved in the frame. */
+ if (fdata->frameless == 0
+ && (lr_reg == -1 || fdata->nosavedpc == 0))
+ break;
+
+ if (op == 0x4e800020 /* blr */
+ || op == 0x4e800420) /* bctr */
+ /* Do not scan past epilogue in frameless functions or
+ trampolines. */
+ break;
+ if ((op & 0xf4000000) == 0x40000000) /* bxx */
+ /* Never skip branches. */
+ break;
+
+ if (num_skip_non_prologue_insns++ > max_skip_non_prologue_insns)
+ /* Do not scan too many insns, scanning insns is expensive with
+ remote targets. */
+ break;
+
+ /* Continue scanning. */
+ prev_insn_was_prologue_insn = 0;
+ continue;
+ }
}
- }
+
#if 0
/* I have problems with skipping over __main() that I need to address
* sometime. Previously, I used to use misc_function_vector which
We'd like to skip over it as well. Fortunately, xlc does some extra
work before calling a function right after a prologue, thus we can
single out such gcc2 behaviour. */
-
- if ((op & 0xfc000001) == 0x48000001) { /* bl foo, an initializer function? */
- op = read_memory_integer (pc+4, 4);
- if (op == 0x4def7b82) { /* cror 0xf, 0xf, 0xf (nop) */
+ if ((op & 0xfc000001) == 0x48000001)
+ { /* bl foo, an initializer function? */
+ op = read_memory_integer (pc + 4, 4);
- /* check and see if we are in main. If so, skip over this initializer
- function as well. */
+ if (op == 0x4def7b82)
+ { /* cror 0xf, 0xf, 0xf (nop) */
- tmp = find_pc_misc_function (pc);
- if (tmp >= 0 && STREQ (misc_function_vector [tmp].name, "main"))
- return pc + 8;
+ /* check and see if we are in main. If so, skip over this initializer
+ function as well. */
+
+ tmp = find_pc_misc_function (pc);
+ if (tmp >= 0 && STREQ (misc_function_vector[tmp].name, "main"))
+ return pc + 8;
+ }
}
- }
#endif /* 0 */
-
- return pc;
+
+ fdata->offset = -fdata->offset;
+ return last_prologue_pc;
}
/*************************************************************************
- Support for creating pushind a dummy frame into the stack, and popping
+ Support for creating pushing a dummy frame into the stack, and popping
frames, etc.
*************************************************************************/
-/* The total size of dummy frame is 436, which is;
-
- 32 gpr's - 128 bytes
- 32 fpr's - 256 "
- 7 the rest - 28 "
- and 24 extra bytes for the callee's link area. The last 24 bytes
- for the link area might not be necessary, since it will be taken
- care of by push_arguments(). */
-
-#define DUMMY_FRAME_SIZE 436
-
-#define DUMMY_FRAME_ADDR_SIZE 10
-
-/* Make sure you initialize these in somewhere, in case gdb gives up what it
- was debugging and starts debugging something else. FIXMEibm */
-
-static int dummy_frame_count = 0;
-static int dummy_frame_size = 0;
-static CORE_ADDR *dummy_frame_addr = 0;
-
-extern int stop_stack_dummy;
-
-/* push a dummy frame into stack, save all register. Currently we are saving
- only gpr's and fpr's, which is not good enough! FIXMEmgo */
-
-void
-push_dummy_frame ()
-{
- /* stack pointer. */
- CORE_ADDR sp;
- /* Same thing, target byte order. */
- char sp_targ[4];
-
- /* link register. */
- CORE_ADDR pc;
- /* Same thing, target byte order. */
- char pc_targ[4];
-
- int ii;
-
- target_fetch_registers (-1);
-
- if (dummy_frame_count >= dummy_frame_size) {
- dummy_frame_size += DUMMY_FRAME_ADDR_SIZE;
- if (dummy_frame_addr)
- dummy_frame_addr = (CORE_ADDR*) xrealloc
- (dummy_frame_addr, sizeof(CORE_ADDR) * (dummy_frame_size));
- else
- dummy_frame_addr = (CORE_ADDR*)
- xmalloc (sizeof(CORE_ADDR) * (dummy_frame_size));
- }
-
- sp = read_register(SP_REGNUM);
- pc = read_register(PC_REGNUM);
- store_address (pc_targ, 4, pc);
-
- dummy_frame_addr [dummy_frame_count++] = sp;
-
- /* Be careful! If the stack pointer is not decremented first, then kernel
- thinks he is free to use the space underneath it. And kernel actually
- uses that area for IPC purposes when executing ptrace(2) calls. So
- before writing register values into the new frame, decrement and update
- %sp first in order to secure your frame. */
-
- write_register (SP_REGNUM, sp-DUMMY_FRAME_SIZE);
-
- /* gdb relies on the state of current_frame. We'd better update it,
- otherwise things like do_registers_info() wouldn't work properly! */
-
- flush_cached_frames ();
-
- /* save program counter in link register's space. */
- write_memory (sp+8, pc_targ, 4);
-
- /* save all floating point and general purpose registers here. */
-
- /* fpr's, f0..f31 */
- for (ii = 0; ii < 32; ++ii)
- write_memory (sp-8-(ii*8), ®isters[REGISTER_BYTE (31-ii+FP0_REGNUM)], 8);
-
- /* gpr's r0..r31 */
- for (ii=1; ii <=32; ++ii)
- write_memory (sp-256-(ii*4), ®isters[REGISTER_BYTE (32-ii)], 4);
-
- /* so far, 32*2 + 32 words = 384 bytes have been written.
- 7 extra registers in our register set: pc, ps, cnd, lr, cnt, xer, mq */
-
- for (ii=1; ii <= (LAST_SP_REGNUM-FIRST_SP_REGNUM+1); ++ii) {
- write_memory (sp-384-(ii*4),
- ®isters[REGISTER_BYTE (FPLAST_REGNUM + ii)], 4);
- }
-
- /* Save sp or so called back chain right here. */
- store_address (sp_targ, 4, sp);
- write_memory (sp-DUMMY_FRAME_SIZE, sp_targ, 4);
- sp -= DUMMY_FRAME_SIZE;
-
- /* And finally, this is the back chain. */
- write_memory (sp+8, pc_targ, 4);
-}
-
-
-/* Pop a dummy frame.
-
- In rs6000 when we push a dummy frame, we save all of the registers. This
- is usually done before user calls a function explicitly.
-
- After a dummy frame is pushed, some instructions are copied into stack,
- and stack pointer is decremented even more. Since we don't have a frame
- pointer to get back to the parent frame of the dummy, we start having
- trouble poping it. Therefore, we keep a dummy frame stack, keeping
- addresses of dummy frames as such. When poping happens and when we
- detect that was a dummy frame, we pop it back to its parent by using
- dummy frame stack (`dummy_frame_addr' array).
-
-FIXME: This whole concept is broken. You should be able to detect
-a dummy stack frame *on the user's stack itself*. When you do,
-then you know the format of that stack frame -- including its
-saved SP register! There should *not* be a separate stack in the
-GDB process that keeps track of these dummy frames! -- gnu@cygnus.com Aug92
- */
-
-pop_dummy_frame ()
-{
- CORE_ADDR sp, pc;
- int ii;
- sp = dummy_frame_addr [--dummy_frame_count];
-
- /* restore all fpr's. */
- for (ii = 1; ii <= 32; ++ii)
- read_memory (sp-(ii*8), ®isters[REGISTER_BYTE (32-ii+FP0_REGNUM)], 8);
-
- /* restore all gpr's */
- for (ii=1; ii <= 32; ++ii) {
- read_memory (sp-256-(ii*4), ®isters[REGISTER_BYTE (32-ii)], 4);
- }
-
- /* restore the rest of the registers. */
- for (ii=1; ii <=(LAST_SP_REGNUM-FIRST_SP_REGNUM+1); ++ii)
- read_memory (sp-384-(ii*4),
- ®isters[REGISTER_BYTE (FPLAST_REGNUM + ii)], 4);
-
- read_memory (sp-(DUMMY_FRAME_SIZE-8),
- ®isters [REGISTER_BYTE(PC_REGNUM)], 4);
-
- /* when a dummy frame was being pushed, we had to decrement %sp first, in
- order to secure astack space. Thus, saved %sp (or %r1) value, is not the
- one we should restore. Change it with the one we need. */
-
- *(int*)®isters [REGISTER_BYTE(FP_REGNUM)] = sp;
-
- /* Now we can restore all registers. */
-
- target_store_registers (-1);
- pc = read_pc ();
- flush_cached_frames ();
-}
+/* Pop the innermost frame, go back to the caller. */
-/* pop the innermost frame, go back to the caller. */
-
-void
-pop_frame ()
+static void
+rs6000_pop_frame (void)
{
- CORE_ADDR pc, lr, sp, prev_sp; /* %pc, %lr, %sp */
- struct aix_framedata fdata;
+ CORE_ADDR pc, lr, sp, prev_sp, addr; /* %pc, %lr, %sp */
+ struct rs6000_framedata fdata;
struct frame_info *frame = get_current_frame ();
- int addr, ii;
+ int ii, wordsize;
pc = read_pc ();
sp = FRAME_FP (frame);
- if (stop_stack_dummy && dummy_frame_count) {
- pop_dummy_frame ();
- return;
- }
+ if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame))
+ {
+ generic_pop_dummy_frame ();
+ flush_cached_frames ();
+ return;
+ }
/* Make sure that all registers are valid. */
read_register_bytes (0, NULL, REGISTER_BYTES);
still in the link register, otherwise walk the frames and retrieve the
saved %pc value in the previous frame. */
- addr = get_pc_function_start (frame->pc) + FUNCTION_START_OFFSET;
- function_frame_info (addr, &fdata);
+ addr = get_pc_function_start (frame->pc);
+ (void) skip_prologue (addr, frame->pc, &fdata);
+ wordsize = TDEP->wordsize;
if (fdata.frameless)
prev_sp = sp;
else
- prev_sp = read_memory_integer (sp, 4);
- if (fdata.nosavedpc)
- lr = read_register (LR_REGNUM);
+ prev_sp = read_memory_addr (sp, wordsize);
+ if (fdata.lr_offset == 0)
+ lr = read_register (PPC_LR_REGNUM);
else
- lr = read_memory_integer (prev_sp+8, 4);
+ lr = read_memory_addr (prev_sp + fdata.lr_offset, wordsize);
/* reset %pc value. */
write_register (PC_REGNUM, lr);
/* reset register values if any was saved earlier. */
- addr = prev_sp - fdata.offset;
if (fdata.saved_gpr != -1)
- for (ii = fdata.saved_gpr; ii <= 31; ++ii) {
- read_memory (addr, ®isters [REGISTER_BYTE (ii)], 4);
- addr += 4;
+ {
+ addr = prev_sp + fdata.gpr_offset;
+ for (ii = fdata.saved_gpr; ii <= 31; ++ii)
+ {
+ read_memory (addr, ®isters[REGISTER_BYTE (ii)], wordsize);
+ addr += wordsize;
+ }
}
if (fdata.saved_fpr != -1)
- for (ii = fdata.saved_fpr; ii <= 31; ++ii) {
- read_memory (addr, ®isters [REGISTER_BYTE (ii+FP0_REGNUM)], 8);
- addr += 8;
- }
+ {
+ addr = prev_sp + fdata.fpr_offset;
+ for (ii = fdata.saved_fpr; ii <= 31; ++ii)
+ {
+ read_memory (addr, ®isters[REGISTER_BYTE (ii + FP0_REGNUM)], 8);
+ addr += 8;
+ }
+ }
write_register (SP_REGNUM, prev_sp);
target_store_registers (-1);
flush_cached_frames ();
}
-/* fixup the call sequence of a dummy function, with the real function address.
- its argumets will be passed by gdb. */
+/* Fixup the call sequence of a dummy function, with the real function
+ address. Its arguments will be passed by gdb. */
-void
-fix_call_dummy(dummyname, pc, fun, nargs, type)
- char *dummyname;
- CORE_ADDR pc;
- CORE_ADDR fun;
- int nargs; /* not used */
- int type; /* not used */
+static void
+rs6000_fix_call_dummy (char *dummyname, CORE_ADDR pc, CORE_ADDR fun,
+ int nargs, value_ptr *args, struct type *type,
+ int gcc_p)
{
#define TOC_ADDR_OFFSET 20
#define TARGET_ADDR_OFFSET 28
int ii;
CORE_ADDR target_addr;
- CORE_ADDR tocvalue;
-
- target_addr = fun;
- tocvalue = find_toc_address (target_addr);
-
- ii = *(int*)((char*)dummyname + TOC_ADDR_OFFSET);
- ii = (ii & 0xffff0000) | (tocvalue >> 16);
- *(int*)((char*)dummyname + TOC_ADDR_OFFSET) = ii;
-
- ii = *(int*)((char*)dummyname + TOC_ADDR_OFFSET+4);
- ii = (ii & 0xffff0000) | (tocvalue & 0x0000ffff);
- *(int*)((char*)dummyname + TOC_ADDR_OFFSET+4) = ii;
-
- ii = *(int*)((char*)dummyname + TARGET_ADDR_OFFSET);
- ii = (ii & 0xffff0000) | (target_addr >> 16);
- *(int*)((char*)dummyname + TARGET_ADDR_OFFSET) = ii;
-
- ii = *(int*)((char*)dummyname + TARGET_ADDR_OFFSET+4);
- ii = (ii & 0xffff0000) | (target_addr & 0x0000ffff);
- *(int*)((char*)dummyname + TARGET_ADDR_OFFSET+4) = ii;
-}
-
-/* return information about a function frame.
- in struct aix_frameinfo fdata:
- - frameless is TRUE, if function does not have a frame.
- - nosavedpc is TRUE, if function does not save %pc value in its frame.
- - offset is the number of bytes used in the frame to save registers.
- - saved_gpr is the number of the first saved gpr.
- - saved_fpr is the number of the first saved fpr.
- - alloca_reg is the number of the register used for alloca() handling.
- Otherwise -1.
- */
-void
-function_frame_info (pc, fdata)
- CORE_ADDR pc;
- struct aix_framedata *fdata;
-{
- unsigned int tmp;
- register unsigned int op;
- char buf[4];
-
- fdata->offset = 0;
- fdata->saved_gpr = fdata->saved_fpr = fdata->alloca_reg = -1;
- fdata->frameless = 1;
-
- /* Do not error out if we can't access the instructions. */
- if (target_read_memory (pc, buf, 4))
- return;
- op = extract_unsigned_integer (buf, 4);
- if (op == 0x7c0802a6) { /* mflr r0 */
- pc += 4;
- op = read_memory_integer (pc, 4);
- fdata->nosavedpc = 0;
- fdata->frameless = 0;
- }
- else /* else, pc is not saved */
- fdata->nosavedpc = 1;
-
- if ((op & 0xfc00003e) == 0x7c000026) { /* mfcr Rx */
- pc += 4;
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
-
- if ((op & 0xfc000000) == 0x48000000) { /* bl foo, to save fprs??? */
- pc += 4;
- op = read_memory_integer (pc, 4);
- /* At this point, make sure this is not a trampoline function
- (a function that simply calls another functions, and nothing else).
- If the next is not a nop, this branch was part of the function
- prologue. */
-
- if (op == 0x4def7b82 || /* crorc 15, 15, 15 */
- op == 0x0)
- return; /* prologue is over */
- fdata->frameless = 0;
- }
-
- if ((op & 0xfc1f0000) == 0xd8010000) { /* stfd Rx,NUM(r1) */
- pc += 4; /* store floating register double */
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
-
- if ((op & 0xfc1f0000) == 0xbc010000) { /* stm Rx, NUM(r1) */
- int tmp2;
- fdata->saved_gpr = (op >> 21) & 0x1f;
- tmp2 = op & 0xffff;
- if (tmp2 > 0x7fff)
- tmp2 = (~0 &~ 0xffff) | tmp2;
-
- if (tmp2 < 0) {
- tmp2 = tmp2 * -1;
- fdata->saved_fpr = (tmp2 - ((32 - fdata->saved_gpr) * 4)) / 8;
- if ( fdata->saved_fpr > 0)
- fdata->saved_fpr = 32 - fdata->saved_fpr;
- else
- fdata->saved_fpr = -1;
- }
- fdata->offset = tmp2;
- pc += 4;
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
-
- while (((tmp = op >> 16) == 0x9001) || /* st r0, NUM(r1) */
- (tmp == 0x9421) || /* stu r1, NUM(r1) */
- (tmp == 0x93e1)) /* st r31, NUM(r1) */
- {
- int tmp2;
-
- /* gcc takes a short cut and uses this instruction to save r31 only. */
-
- if (tmp == 0x93e1) {
- if (fdata->offset)
-/* fatal ("Unrecognized prolog."); */
- printf_unfiltered ("Unrecognized prolog!\n");
-
- fdata->saved_gpr = 31;
- tmp2 = op & 0xffff;
- if (tmp2 > 0x7fff) {
- tmp2 = - ((~0 &~ 0xffff) | tmp2);
- fdata->saved_fpr = (tmp2 - ((32 - 31) * 4)) / 8;
- if ( fdata->saved_fpr > 0)
- fdata->saved_fpr = 32 - fdata->saved_fpr;
- else
- fdata->saved_fpr = -1;
- }
- fdata->offset = tmp2;
- }
- pc += 4;
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
-
- while ((tmp = (op >> 22)) == 0x20f) { /* l r31, ... or */
- pc += 4; /* l r30, ... */
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
-
- /* store parameters into stack */
- while(
- (op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
- (op & 0xfc1f0000) == 0x90010000 || /* st r?, NUM(r1) */
- (op & 0xfc000000) == 0xfc000000 || /* frsp, fp?, .. */
- (op & 0xd0000000) == 0xd0000000) /* stfs, fp?, .. */
- {
- pc += 4; /* store fpr double */
- op = read_memory_integer (pc, 4);
- fdata->frameless = 0;
- }
-
- if (op == 0x603f0000 /* oril r31, r1, 0x0 */
- || op == 0x7c3f0b78) /* mr r31, r1 */
+ if (rs6000_find_toc_address_hook != NULL)
{
- fdata->alloca_reg = 31;
- fdata->frameless = 0;
+ CORE_ADDR tocvalue = (*rs6000_find_toc_address_hook) (fun);
+ write_register (PPC_TOC_REGNUM, tocvalue);
}
}
-
-/* Pass the arguments in either registers, or in the stack. In RS6000, the first
- eight words of the argument list (that might be less than eight parameters if
- some parameters occupy more than one word) are passed in r3..r11 registers.
- float and double parameters are passed in fpr's, in addition to that. Rest of
- the parameters if any are passed in user stack. There might be cases in which
- half of the parameter is copied into registers, the other half is pushed into
+/* Pass the arguments in either registers, or in the stack. In RS/6000,
+ the first eight words of the argument list (that might be less than
+ eight parameters if some parameters occupy more than one word) are
+ passed in r3..r10 registers. float and double parameters are
+ passed in fpr's, in addition to that. Rest of the parameters if any
+ are passed in user stack. There might be cases in which half of the
+ parameter is copied into registers, the other half is pushed into
stack.
+ Stack must be aligned on 64-bit boundaries when synthesizing
+ function calls.
+
If the function is returning a structure, then the return address is passed
- in r3, then the first 7 words of the parametes can be passed in registers,
+ in r3, then the first 7 words of the parameters can be passed in registers,
starting from r4. */
-CORE_ADDR
-push_arguments (nargs, args, sp, struct_return, struct_addr)
- int nargs;
- value_ptr *args;
- CORE_ADDR sp;
- int struct_return;
- CORE_ADDR struct_addr;
+static CORE_ADDR
+rs6000_push_arguments (int nargs, value_ptr *args, CORE_ADDR sp,
+ int struct_return, CORE_ADDR struct_addr)
{
- int ii, len;
- int argno; /* current argument number */
- int argbytes; /* current argument byte */
- char tmp_buffer [50];
- value_ptr arg;
- int f_argno = 0; /* current floating point argno */
+ int ii;
+ int len = 0;
+ int argno; /* current argument number */
+ int argbytes; /* current argument byte */
+ char tmp_buffer[50];
+ int f_argno = 0; /* current floating point argno */
+ int wordsize = TDEP->wordsize;
- CORE_ADDR saved_sp, pc;
+ value_ptr arg = 0;
+ struct type *type;
- if ( dummy_frame_count <= 0)
- printf_unfiltered ("FATAL ERROR -push_arguments()! frame not found!!\n");
+ CORE_ADDR saved_sp;
/* The first eight words of ther arguments are passed in registers. Copy
them appropriately.
case we should advance one word and start from r4 register to copy
parameters. */
- ii = struct_return ? 1 : 0;
-
- for (argno=0, argbytes=0; argno < nargs && ii<8; ++ii) {
-
- arg = args[argno];
- len = TYPE_LENGTH (VALUE_TYPE (arg));
-
- if (TYPE_CODE (VALUE_TYPE (arg)) == TYPE_CODE_FLT) {
-
- /* floating point arguments are passed in fpr's, as well as gpr's.
- There are 13 fpr's reserved for passing parameters. At this point
- there is no way we would run out of them. */
-
- if (len > 8)
- printf_unfiltered (
-"Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno);
-
- memcpy (®isters[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)], VALUE_CONTENTS (arg),
- len);
- ++f_argno;
- }
-
- if (len > 4) {
-
- /* Argument takes more than one register. */
- while (argbytes < len) {
+ ii = struct_return ? 1 : 0;
+
+/*
+ effectively indirect call... gcc does...
+
+ return_val example( float, int);
+
+ eabi:
+ float in fp0, int in r3
+ offset of stack on overflow 8/16
+ for varargs, must go by type.
+ power open:
+ float in r3&r4, int in r5
+ offset of stack on overflow different
+ both:
+ return in r3 or f0. If no float, must study how gcc emulates floats;
+ pay attention to arg promotion.
+ User may have to cast\args to handle promotion correctly
+ since gdb won't know if prototype supplied or not.
+ */
- *(int*)®isters[REGISTER_BYTE(ii+3)] = 0;
- memcpy (®isters[REGISTER_BYTE(ii+3)],
- ((char*)VALUE_CONTENTS (arg))+argbytes,
- (len - argbytes) > 4 ? 4 : len - argbytes);
- ++ii, argbytes += 4;
+ for (argno = 0, argbytes = 0; argno < nargs && ii < 8; ++ii)
+ {
+ int reg_size = REGISTER_RAW_SIZE (ii + 3);
- if (ii >= 8)
- goto ran_out_of_registers_for_arguments;
- }
- argbytes = 0;
- --ii;
- }
- else { /* Argument can fit in one register. No problem. */
- *(int*)®isters[REGISTER_BYTE(ii+3)] = 0;
- memcpy (®isters[REGISTER_BYTE(ii+3)], VALUE_CONTENTS (arg), len);
+ arg = args[argno];
+ type = check_typedef (VALUE_TYPE (arg));
+ len = TYPE_LENGTH (type);
+
+ if (TYPE_CODE (type) == TYPE_CODE_FLT)
+ {
+
+ /* floating point arguments are passed in fpr's, as well as gpr's.
+ There are 13 fpr's reserved for passing parameters. At this point
+ there is no way we would run out of them. */
+
+ if (len > 8)
+ printf_unfiltered (
+ "Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno);
+
+ memcpy (®isters[REGISTER_BYTE (FP0_REGNUM + 1 + f_argno)],
+ VALUE_CONTENTS (arg),
+ len);
+ ++f_argno;
+ }
+
+ if (len > reg_size)
+ {
+
+ /* Argument takes more than one register. */
+ while (argbytes < len)
+ {
+ memset (®isters[REGISTER_BYTE (ii + 3)], 0, reg_size);
+ memcpy (®isters[REGISTER_BYTE (ii + 3)],
+ ((char *) VALUE_CONTENTS (arg)) + argbytes,
+ (len - argbytes) > reg_size
+ ? reg_size : len - argbytes);
+ ++ii, argbytes += reg_size;
+
+ if (ii >= 8)
+ goto ran_out_of_registers_for_arguments;
+ }
+ argbytes = 0;
+ --ii;
+ }
+ else
+ { /* Argument can fit in one register. No problem. */
+ int adj = TARGET_BYTE_ORDER == BIG_ENDIAN ? reg_size - len : 0;
+ memset (®isters[REGISTER_BYTE (ii + 3)], 0, reg_size);
+ memcpy ((char *)®isters[REGISTER_BYTE (ii + 3)] + adj,
+ VALUE_CONTENTS (arg), len);
+ }
+ ++argno;
}
- ++argno;
- }
ran_out_of_registers_for_arguments:
+ saved_sp = read_sp ();
+#ifndef ELF_OBJECT_FORMAT
/* location for 8 parameters are always reserved. */
- sp -= 4 * 8;
+ sp -= wordsize * 8;
/* another six words for back chain, TOC register, link register, etc. */
- sp -= 24;
+ sp -= wordsize * 6;
+
+ /* stack pointer must be quadword aligned */
+ sp &= -16;
+#endif
/* if there are more arguments, allocate space for them in
the stack, then push them starting from the ninth one. */
- if ((argno < nargs) || argbytes) {
- int space = 0, jj;
- value_ptr val;
+ if ((argno < nargs) || argbytes)
+ {
+ int space = 0, jj;
- if (argbytes) {
- space += ((len - argbytes + 3) & -4);
- jj = argno + 1;
+ if (argbytes)
+ {
+ space += ((len - argbytes + 3) & -4);
+ jj = argno + 1;
+ }
+ else
+ jj = argno;
+
+ for (; jj < nargs; ++jj)
+ {
+ value_ptr val = args[jj];
+ space += ((TYPE_LENGTH (VALUE_TYPE (val))) + 3) & -4;
+ }
+
+ /* add location required for the rest of the parameters */
+ space = (space + 15) & -16;
+ sp -= space;
+
+ /* This is another instance we need to be concerned about securing our
+ stack space. If we write anything underneath %sp (r1), we might conflict
+ with the kernel who thinks he is free to use this area. So, update %sp
+ first before doing anything else. */
+
+ write_register (SP_REGNUM, sp);
+
+ /* if the last argument copied into the registers didn't fit there
+ completely, push the rest of it into stack. */
+
+ if (argbytes)
+ {
+ write_memory (sp + 24 + (ii * 4),
+ ((char *) VALUE_CONTENTS (arg)) + argbytes,
+ len - argbytes);
+ ++argno;
+ ii += ((len - argbytes + 3) & -4) / 4;
+ }
+
+ /* push the rest of the arguments into stack. */
+ for (; argno < nargs; ++argno)
+ {
+
+ arg = args[argno];
+ type = check_typedef (VALUE_TYPE (arg));
+ len = TYPE_LENGTH (type);
+
+
+ /* float types should be passed in fpr's, as well as in the stack. */
+ if (TYPE_CODE (type) == TYPE_CODE_FLT && f_argno < 13)
+ {
+
+ if (len > 8)
+ printf_unfiltered (
+ "Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno);
+
+ memcpy (®isters[REGISTER_BYTE (FP0_REGNUM + 1 + f_argno)],
+ VALUE_CONTENTS (arg),
+ len);
+ ++f_argno;
+ }
+
+ write_memory (sp + 24 + (ii * 4), (char *) VALUE_CONTENTS (arg), len);
+ ii += ((len + 3) & -4) / 4;
+ }
}
- else
- jj = argno;
+ else
+ /* Secure stack areas first, before doing anything else. */
+ write_register (SP_REGNUM, sp);
- for (; jj < nargs; ++jj) {
- val = args[jj];
- space += ((TYPE_LENGTH (VALUE_TYPE (val))) + 3) & -4;
- }
+ /* set back chain properly */
+ store_address (tmp_buffer, 4, saved_sp);
+ write_memory (sp, tmp_buffer, 4);
- /* add location required for the rest of the parameters */
- space = (space + 7) & -8;
- sp -= space;
+ target_store_registers (-1);
+ return sp;
+}
- /* This is another instance we need to be concerned about securing our
- stack space. If we write anything underneath %sp (r1), we might conflict
- with the kernel who thinks he is free to use this area. So, update %sp
- first before doing anything else. */
+/* Function: ppc_push_return_address (pc, sp)
+ Set up the return address for the inferior function call. */
- write_register (SP_REGNUM, sp);
-
- /* if the last argument copied into the registers didn't fit there
- completely, push the rest of it into stack. */
-
- if (argbytes) {
- write_memory (
- sp+24+(ii*4), ((char*)VALUE_CONTENTS (arg))+argbytes, len - argbytes);
- ++argno;
- ii += ((len - argbytes + 3) & -4) / 4;
- }
-
- /* push the rest of the arguments into stack. */
- for (; argno < nargs; ++argno) {
-
- arg = args[argno];
- len = TYPE_LENGTH (VALUE_TYPE (arg));
-
-
- /* float types should be passed in fpr's, as well as in the stack. */
- if (TYPE_CODE (VALUE_TYPE (arg)) == TYPE_CODE_FLT && f_argno < 13) {
-
- if (len > 8)
- printf_unfiltered (
-"Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno);
-
- memcpy (®isters[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)], VALUE_CONTENTS (arg),
- len);
- ++f_argno;
- }
-
- write_memory (sp+24+(ii*4), (char *) VALUE_CONTENTS (arg), len);
- ii += ((len + 3) & -4) / 4;
- }
- }
- else
- /* Secure stack areas first, before doing anything else. */
- write_register (SP_REGNUM, sp);
-
- saved_sp = dummy_frame_addr [dummy_frame_count - 1];
- read_memory (saved_sp, tmp_buffer, 24);
- write_memory (sp, tmp_buffer, 24);
-
- /* set back chain properly */
- store_address (tmp_buffer, 4, saved_sp);
- write_memory (sp, tmp_buffer, 4);
-
- target_store_registers (-1);
+static CORE_ADDR
+ppc_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
+{
+ write_register (PPC_LR_REGNUM, CALL_DUMMY_ADDRESS ());
return sp;
}
-/* a given return value in `regbuf' with a type `valtype', extract and copy its
- value into `valbuf' */
+/* Extract a function return value of type TYPE from raw register array
+ REGBUF, and copy that return value into VALBUF in virtual format. */
-void
-extract_return_value (valtype, regbuf, valbuf)
- struct type *valtype;
- char regbuf[REGISTER_BYTES];
- char *valbuf;
+static void
+rs6000_extract_return_value (struct type *valtype, char *regbuf, char *valbuf)
{
+ int offset = 0;
- if (TYPE_CODE (valtype) == TYPE_CODE_FLT) {
+ if (TYPE_CODE (valtype) == TYPE_CODE_FLT)
+ {
- double dd; float ff;
- /* floats and doubles are returned in fpr1. fpr's have a size of 8 bytes.
- We need to truncate the return value into float size (4 byte) if
- necessary. */
+ double dd;
+ float ff;
+ /* floats and doubles are returned in fpr1. fpr's have a size of 8 bytes.
+ We need to truncate the return value into float size (4 byte) if
+ necessary. */
- if (TYPE_LENGTH (valtype) > 4) /* this is a double */
- memcpy (valbuf, ®buf[REGISTER_BYTE (FP0_REGNUM + 1)],
- TYPE_LENGTH (valtype));
- else { /* float */
- memcpy (&dd, ®buf[REGISTER_BYTE (FP0_REGNUM + 1)], 8);
- ff = (float)dd;
- memcpy (valbuf, &ff, sizeof(float));
+ if (TYPE_LENGTH (valtype) > 4) /* this is a double */
+ memcpy (valbuf,
+ ®buf[REGISTER_BYTE (FP0_REGNUM + 1)],
+ TYPE_LENGTH (valtype));
+ else
+ { /* float */
+ memcpy (&dd, ®buf[REGISTER_BYTE (FP0_REGNUM + 1)], 8);
+ ff = (float) dd;
+ memcpy (valbuf, &ff, sizeof (float));
+ }
}
- }
else
- /* return value is copied starting from r3. */
- memcpy (valbuf, ®buf[REGISTER_BYTE (3)], TYPE_LENGTH (valtype));
+ {
+ /* return value is copied starting from r3. */
+ if (TARGET_BYTE_ORDER == BIG_ENDIAN
+ && TYPE_LENGTH (valtype) < REGISTER_RAW_SIZE (3))
+ offset = REGISTER_RAW_SIZE (3) - TYPE_LENGTH (valtype);
+
+ memcpy (valbuf,
+ regbuf + REGISTER_BYTE (3) + offset,
+ TYPE_LENGTH (valtype));
+ }
}
-
-/* keep structure return address in this variable.
+/* Keep structure return address in this variable.
FIXME: This is a horrid kludge which should not be allowed to continue
living. This only allows a single nested call to a structure-returning
function. Come on, guys! -- gnu@cygnus.com, Aug 92 */
-CORE_ADDR rs6000_struct_return_address;
-
+static CORE_ADDR rs6000_struct_return_address;
/* Indirect function calls use a piece of trampoline code to do context
switching, i.e. to set the new TOC table. Skip such code if we are on
trampoline code. */
CORE_ADDR
-skip_trampoline_code (pc)
-CORE_ADDR pc;
+rs6000_skip_trampoline_code (CORE_ADDR pc)
{
register unsigned int ii, op;
CORE_ADDR solib_target_pc;
- static unsigned trampoline_code[] = {
- 0x800b0000, /* l r0,0x0(r11) */
- 0x90410014, /* st r2,0x14(r1) */
- 0x7c0903a6, /* mtctr r0 */
- 0x804b0004, /* l r2,0x4(r11) */
- 0x816b0008, /* l r11,0x8(r11) */
- 0x4e800420, /* bctr */
- 0x4e800020, /* br */
- 0
+ static unsigned trampoline_code[] =
+ {
+ 0x800b0000, /* l r0,0x0(r11) */
+ 0x90410014, /* st r2,0x14(r1) */
+ 0x7c0903a6, /* mtctr r0 */
+ 0x804b0004, /* l r2,0x4(r11) */
+ 0x816b0008, /* l r11,0x8(r11) */
+ 0x4e800420, /* bctr */
+ 0x4e800020, /* br */
+ 0
};
/* If pc is in a shared library trampoline, return its target. */
if (solib_target_pc)
return solib_target_pc;
- for (ii=0; trampoline_code[ii]; ++ii) {
- op = read_memory_integer (pc + (ii*4), 4);
- if (op != trampoline_code [ii])
- return 0;
- }
- ii = read_register (11); /* r11 holds destination addr */
- pc = read_memory_integer (ii, 4); /* (r11) value */
+ for (ii = 0; trampoline_code[ii]; ++ii)
+ {
+ op = read_memory_integer (pc + (ii * 4), 4);
+ if (op != trampoline_code[ii])
+ return 0;
+ }
+ ii = read_register (11); /* r11 holds destination addr */
+ pc = read_memory_addr (ii, TDEP->wordsize); /* (r11) value */
return pc;
}
-
-/* Determines whether the function FI has a frame on the stack or not.
- Called from the FRAMELESS_FUNCTION_INVOCATION macro in tm.h with a
- second argument of 0, and from the FRAME_SAVED_PC macro with a
- second argument of 1. */
+/* Determines whether the function FI has a frame on the stack or not. */
int
-frameless_function_invocation (fi, pcsaved)
-struct frame_info *fi;
-int pcsaved;
+rs6000_frameless_function_invocation (struct frame_info *fi)
{
CORE_ADDR func_start;
- struct aix_framedata fdata;
+ struct rs6000_framedata fdata;
- if (fi->next != NULL)
- /* Don't even think about framelessness except on the innermost frame. */
- /* FIXME: Can also be frameless if fi->next->signal_handler_caller (if
- a signal happens while executing in a frameless function). */
+ /* Don't even think about framelessness except on the innermost frame
+ or if the function was interrupted by a signal. */
+ if (fi->next != NULL && !fi->next->signal_handler_caller)
return 0;
-
- func_start = get_pc_function_start (fi->pc) + FUNCTION_START_OFFSET;
+
+ func_start = get_pc_function_start (fi->pc);
/* If we failed to find the start of the function, it is a mistake
to inspect the instructions. */
if (!func_start)
- return 0;
+ {
+ /* A frame with a zero PC is usually created by dereferencing a NULL
+ function pointer, normally causing an immediate core dump of the
+ inferior. Mark function as frameless, as the inferior has no chance
+ of setting up a stack frame. */
+ if (fi->pc == 0)
+ return 1;
+ else
+ return 0;
+ }
- function_frame_info (func_start, &fdata);
- return pcsaved ? fdata.nosavedpc : fdata.frameless;
+ (void) skip_prologue (func_start, fi->pc, &fdata);
+ return fdata.frameless;
}
+/* Return the PC saved in a frame */
+
+CORE_ADDR
+rs6000_frame_saved_pc (struct frame_info *fi)
+{
+ CORE_ADDR func_start;
+ struct rs6000_framedata fdata;
+ int wordsize = TDEP->wordsize;
+
+ if (fi->signal_handler_caller)
+ return read_memory_addr (fi->frame + SIG_FRAME_PC_OFFSET, wordsize);
+
+ if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+ return generic_read_register_dummy (fi->pc, fi->frame, PC_REGNUM);
+
+ func_start = get_pc_function_start (fi->pc);
+
+ /* If we failed to find the start of the function, it is a mistake
+ to inspect the instructions. */
+ if (!func_start)
+ return 0;
+
+ (void) skip_prologue (func_start, fi->pc, &fdata);
+
+ if (fdata.lr_offset == 0 && fi->next != NULL)
+ {
+ if (fi->next->signal_handler_caller)
+ return read_memory_addr (fi->next->frame + SIG_FRAME_LR_OFFSET,
+ wordsize);
+ else
+ return read_memory_addr (FRAME_CHAIN (fi) + DEFAULT_LR_SAVE,
+ wordsize);
+ }
+
+ if (fdata.lr_offset == 0)
+ return read_register (PPC_LR_REGNUM);
+
+ return read_memory_addr (FRAME_CHAIN (fi) + fdata.lr_offset, wordsize);
+}
/* If saved registers of frame FI are not known yet, read and cache them.
- &FDATAP contains aix_framedata; TDATAP can be NULL,
+ &FDATAP contains rs6000_framedata; TDATAP can be NULL,
in which case the framedata are read. */
static void
-frame_get_cache_fsr (fi, fdatap)
- struct frame_info *fi;
- struct aix_framedata *fdatap;
+frame_get_saved_regs (struct frame_info *fi, struct rs6000_framedata *fdatap)
{
- int ii;
- CORE_ADDR frame_addr;
- struct aix_framedata work_fdata;
+ CORE_ADDR frame_addr;
+ struct rs6000_framedata work_fdata;
+ int wordsize = TDEP->wordsize;
- if (fi->cache_fsr)
+ if (fi->saved_regs)
return;
-
- if (fdatap == NULL) {
- fdatap = &work_fdata;
- function_frame_info (get_pc_function_start (fi->pc), fdatap);
- }
- fi->cache_fsr = (struct frame_saved_regs *)
- obstack_alloc (&frame_cache_obstack, sizeof (struct frame_saved_regs));
- memset (fi->cache_fsr, '\0', sizeof (struct frame_saved_regs));
+ if (fdatap == NULL)
+ {
+ fdatap = &work_fdata;
+ (void) skip_prologue (get_pc_function_start (fi->pc), fi->pc, fdatap);
+ }
+
+ frame_saved_regs_zalloc (fi);
+
+ /* If there were any saved registers, figure out parent's stack
+ pointer. */
+ /* The following is true only if the frame doesn't have a call to
+ alloca(), FIXME. */
- if (fi->prev && fi->prev->frame)
+ if (fdatap->saved_fpr == 0 && fdatap->saved_gpr == 0
+ && fdatap->lr_offset == 0 && fdatap->cr_offset == 0)
+ frame_addr = 0;
+ else if (fi->prev && fi->prev->frame)
frame_addr = fi->prev->frame;
else
- frame_addr = read_memory_integer (fi->frame, 4);
-
+ frame_addr = read_memory_addr (fi->frame, wordsize);
+
/* if != -1, fdatap->saved_fpr is the smallest number of saved_fpr.
- All fpr's from saved_fpr to fp31 are saved right underneath caller
- stack pointer, starting from fp31 first. */
+ All fpr's from saved_fpr to fp31 are saved. */
- if (fdatap->saved_fpr >= 0) {
- for (ii=31; ii >= fdatap->saved_fpr; --ii)
- fi->cache_fsr->regs [FP0_REGNUM + ii] = frame_addr - ((32 - ii) * 8);
- frame_addr -= (32 - fdatap->saved_fpr) * 8;
- }
+ if (fdatap->saved_fpr >= 0)
+ {
+ int i;
+ CORE_ADDR fpr_addr = frame_addr + fdatap->fpr_offset;
+ for (i = fdatap->saved_fpr; i < 32; i++)
+ {
+ fi->saved_regs[FP0_REGNUM + i] = fpr_addr;
+ fpr_addr += 8;
+ }
+ }
/* if != -1, fdatap->saved_gpr is the smallest number of saved_gpr.
- All gpr's from saved_gpr to gpr31 are saved right under saved fprs,
- starting from r31 first. */
-
+ All gpr's from saved_gpr to gpr31 are saved. */
+
if (fdatap->saved_gpr >= 0)
- for (ii=31; ii >= fdatap->saved_gpr; --ii)
- fi->cache_fsr->regs [ii] = frame_addr - ((32 - ii) * 4);
+ {
+ int i;
+ CORE_ADDR gpr_addr = frame_addr + fdatap->gpr_offset;
+ for (i = fdatap->saved_gpr; i < 32; i++)
+ {
+ fi->saved_regs[i] = gpr_addr;
+ gpr_addr += wordsize;
+ }
+ }
+
+ /* If != 0, fdatap->cr_offset is the offset from the frame that holds
+ the CR. */
+ if (fdatap->cr_offset != 0)
+ fi->saved_regs[PPC_CR_REGNUM] = frame_addr + fdatap->cr_offset;
+
+ /* If != 0, fdatap->lr_offset is the offset from the frame that holds
+ the LR. */
+ if (fdatap->lr_offset != 0)
+ fi->saved_regs[PPC_LR_REGNUM] = frame_addr + fdatap->lr_offset;
}
/* Return the address of a frame. This is the inital %sp value when the frame
was first allocated. For functions calling alloca(), it might be saved in
an alloca register. */
-CORE_ADDR
-frame_initial_stack_address (fi)
- struct frame_info *fi;
+static CORE_ADDR
+frame_initial_stack_address (struct frame_info *fi)
{
CORE_ADDR tmpaddr;
- struct aix_framedata fdata;
+ struct rs6000_framedata fdata;
struct frame_info *callee_fi;
/* if the initial stack pointer (frame address) of this frame is known,
just return it. */
- if (fi->initial_sp)
- return fi->initial_sp;
+ if (fi->extra_info->initial_sp)
+ return fi->extra_info->initial_sp;
/* find out if this function is using an alloca register.. */
- function_frame_info (get_pc_function_start (fi->pc), &fdata);
+ (void) skip_prologue (get_pc_function_start (fi->pc), fi->pc, &fdata);
/* if saved registers of this frame are not known yet, read and cache them. */
- if (!fi->cache_fsr)
- frame_get_cache_fsr (fi, &fdata);
+ if (!fi->saved_regs)
+ frame_get_saved_regs (fi, &fdata);
/* If no alloca register used, then fi->frame is the value of the %sp for
this frame, and it is good enough. */
- if (fdata.alloca_reg < 0) {
- fi->initial_sp = fi->frame;
- return fi->initial_sp;
- }
+ if (fdata.alloca_reg < 0)
+ {
+ fi->extra_info->initial_sp = fi->frame;
+ return fi->extra_info->initial_sp;
+ }
/* This function has an alloca register. If this is the top-most frame
(with the lowest address), the value in alloca register is good. */
if (!fi->next)
- return fi->initial_sp = read_register (fdata.alloca_reg);
+ return fi->extra_info->initial_sp = read_register (fdata.alloca_reg);
/* Otherwise, this is a caller frame. Callee has usually already saved
registers, but there are exceptions (such as when the callee
has no parameters). Find the address in which caller's alloca
register is saved. */
- for (callee_fi = fi->next; callee_fi; callee_fi = callee_fi->next) {
+ for (callee_fi = fi->next; callee_fi; callee_fi = callee_fi->next)
+ {
- if (!callee_fi->cache_fsr)
- frame_get_cache_fsr (callee_fi, NULL);
+ if (!callee_fi->saved_regs)
+ frame_get_saved_regs (callee_fi, NULL);
- /* this is the address in which alloca register is saved. */
+ /* this is the address in which alloca register is saved. */
- tmpaddr = callee_fi->cache_fsr->regs [fdata.alloca_reg];
- if (tmpaddr) {
- fi->initial_sp = read_memory_integer (tmpaddr, 4);
- return fi->initial_sp;
- }
+ tmpaddr = callee_fi->saved_regs[fdata.alloca_reg];
+ if (tmpaddr)
+ {
+ fi->extra_info->initial_sp =
+ read_memory_addr (tmpaddr, TDEP->wordsize);
+ return fi->extra_info->initial_sp;
+ }
- /* Go look into deeper levels of the frame chain to see if any one of
- the callees has saved alloca register. */
- }
+ /* Go look into deeper levels of the frame chain to see if any one of
+ the callees has saved alloca register. */
+ }
/* If alloca register was not saved, by the callee (or any of its callees)
then the value in the register is still good. */
- return fi->initial_sp = read_register (fdata.alloca_reg);
+ fi->extra_info->initial_sp = read_register (fdata.alloca_reg);
+ return fi->extra_info->initial_sp;
}
+/* Describe the pointer in each stack frame to the previous stack frame
+ (its caller). */
+
+/* FRAME_CHAIN takes a frame's nominal address
+ and produces the frame's chain-pointer. */
+
+/* In the case of the RS/6000, the frame's nominal address
+ is the address of a 4-byte word containing the calling frame's address. */
+
CORE_ADDR
-rs6000_frame_chain (thisframe)
- struct frame_info *thisframe;
+rs6000_frame_chain (struct frame_info *thisframe)
{
- CORE_ADDR fp;
- if (inside_entry_file ((thisframe)->pc))
+ CORE_ADDR fp, fpp, lr;
+ int wordsize = TDEP->wordsize;
+
+ if (PC_IN_CALL_DUMMY (thisframe->pc, thisframe->frame, thisframe->frame))
+ return thisframe->frame; /* dummy frame same as caller's frame */
+
+ if (inside_entry_file (thisframe->pc) ||
+ thisframe->pc == entry_point_address ())
return 0;
+
if (thisframe->signal_handler_caller)
- fp = read_memory_integer (thisframe->frame + SIG_FRAME_FP_OFFSET, 4);
+ fp = read_memory_addr (thisframe->frame + SIG_FRAME_FP_OFFSET,
+ wordsize);
+ else if (thisframe->next != NULL
+ && thisframe->next->signal_handler_caller
+ && FRAMELESS_FUNCTION_INVOCATION (thisframe))
+ /* A frameless function interrupted by a signal did not change the
+ frame pointer. */
+ fp = FRAME_FP (thisframe);
else
- fp = read_memory_integer ((thisframe)->frame, 4);
+ fp = read_memory_addr ((thisframe)->frame, wordsize);
+
+ lr = read_register (PPC_LR_REGNUM);
+ if (lr == entry_point_address ())
+ if (fp != 0 && (fpp = read_memory_addr (fp, wordsize)) != 0)
+ if (PC_IN_CALL_DUMMY (lr, fpp, fpp))
+ return fpp;
return fp;
}
-\f
-/* Keep an array of load segment information and their TOC table addresses.
- This info will be useful when calling a shared library function by hand. */
-
-struct loadinfo {
- CORE_ADDR textorg, dataorg;
- unsigned long toc_offset;
-};
-#define LOADINFOLEN 10
+/* Return the size of register REG when words are WORDSIZE bytes long. If REG
+ isn't available with that word size, return 0. */
-static struct loadinfo *loadinfo = NULL;
-static int loadinfolen = 0;
-static int loadinfotocindex = 0;
-static int loadinfotextindex = 0;
+static int
+regsize (const struct reg *reg, int wordsize)
+{
+ return wordsize == 8 ? reg->sz64 : reg->sz32;
+}
+/* Return the name of register number N, or null if no such register exists
+ in the current architecture. */
-void
-xcoff_init_loadinfo ()
+static char *
+rs6000_register_name (int n)
{
- loadinfotocindex = 0;
- loadinfotextindex = 0;
+ struct gdbarch_tdep *tdep = TDEP;
+ const struct reg *reg = tdep->regs + n;
- if (loadinfolen == 0) {
- loadinfo = (struct loadinfo *)
- xmalloc (sizeof (struct loadinfo) * LOADINFOLEN);
- loadinfolen = LOADINFOLEN;
- }
+ if (!regsize (reg, tdep->wordsize))
+ return NULL;
+ return reg->name;
}
+/* Index within `registers' of the first byte of the space for
+ register N. */
-/* FIXME -- this is never called! */
-void
-free_loadinfo ()
+static int
+rs6000_register_byte (int n)
{
- if (loadinfo)
- free (loadinfo);
- loadinfo = NULL;
- loadinfolen = 0;
- loadinfotocindex = 0;
- loadinfotextindex = 0;
+ return TDEP->regoff[n];
}
-/* this is called from xcoffread.c */
+/* Return the number of bytes of storage in the actual machine representation
+ for register N if that register is available, else return 0. */
-void
-xcoff_add_toc_to_loadinfo (tocoff)
- unsigned long tocoff;
+static int
+rs6000_register_raw_size (int n)
{
- while (loadinfotocindex >= loadinfolen) {
- loadinfolen += LOADINFOLEN;
- loadinfo = (struct loadinfo *)
- xrealloc (loadinfo, sizeof(struct loadinfo) * loadinfolen);
- }
- loadinfo [loadinfotocindex++].toc_offset = tocoff;
+ struct gdbarch_tdep *tdep = TDEP;
+ const struct reg *reg = tdep->regs + n;
+ return regsize (reg, tdep->wordsize);
}
-void
-add_text_to_loadinfo (textaddr, dataaddr)
- CORE_ADDR textaddr;
- CORE_ADDR dataaddr;
+/* Number of bytes of storage in the program's representation
+ for register N. */
+
+static int
+rs6000_register_virtual_size (int n)
{
- while (loadinfotextindex >= loadinfolen) {
- loadinfolen += LOADINFOLEN;
- loadinfo = (struct loadinfo *)
- xrealloc (loadinfo, sizeof(struct loadinfo) * loadinfolen);
- }
- loadinfo [loadinfotextindex].textorg = textaddr;
- loadinfo [loadinfotextindex].dataorg = dataaddr;
- ++loadinfotextindex;
+ return TYPE_LENGTH (REGISTER_VIRTUAL_TYPE (n));
+}
+
+/* Return the GDB type object for the "standard" data type
+ of data in register N. */
+
+static struct type *
+rs6000_register_virtual_type (int n)
+{
+ struct gdbarch_tdep *tdep = TDEP;
+ const struct reg *reg = tdep->regs + n;
+
+ return reg->fpr ? builtin_type_double :
+ regsize (reg, tdep->wordsize) == 8 ? builtin_type_int64 :
+ builtin_type_int32;
+}
+
+/* For the PowerPC, it appears that the debug info marks float parameters as
+ floats regardless of whether the function is prototyped, but the actual
+ values are always passed in as doubles. Tell gdb to always assume that
+ floats are passed as doubles and then converted in the callee. */
+
+static int
+rs6000_coerce_float_to_double (struct type *formal, struct type *actual)
+{
+ return 1;
+}
+
+/* Return whether register N requires conversion when moving from raw format
+ to virtual format.
+
+ The register format for RS/6000 floating point registers is always
+ double, we need a conversion if the memory format is float. */
+
+static int
+rs6000_register_convertible (int n)
+{
+ const struct reg *reg = TDEP->regs + n;
+ return reg->fpr;
}
+/* Convert data from raw format for register N in buffer FROM
+ to virtual format with type TYPE in buffer TO. */
+
+static void
+rs6000_register_convert_to_virtual (int n, struct type *type,
+ char *from, char *to)
+{
+ if (TYPE_LENGTH (type) != REGISTER_RAW_SIZE (n))
+ {
+ double val = extract_floating (from, REGISTER_RAW_SIZE (n));
+ store_floating (to, TYPE_LENGTH (type), val);
+ }
+ else
+ memcpy (to, from, REGISTER_RAW_SIZE (n));
+}
-/* Note that this assumes that the "textorg" and "dataorg" elements
- of a member of this array are correlated with the "toc_offset"
- element of the same member. This is taken care of because the loops
- which assign the former (in xcoff_relocate_symtab or xcoff_relocate_core)
- and the latter (in scan_xcoff_symtab, via vmap_symtab, in vmap_ldinfo
- or xcoff_relocate_core) traverse the same objfiles in the same order. */
+/* Convert data from virtual format with type TYPE in buffer FROM
+ to raw format for register N in buffer TO. */
+
+static void
+rs6000_register_convert_to_raw (struct type *type, int n,
+ char *from, char *to)
+{
+ if (TYPE_LENGTH (type) != REGISTER_RAW_SIZE (n))
+ {
+ double val = extract_floating (from, TYPE_LENGTH (type));
+ store_floating (to, REGISTER_RAW_SIZE (n), val);
+ }
+ else
+ memcpy (to, from, REGISTER_RAW_SIZE (n));
+}
+
+/* Store the address of the place in which to copy the structure the
+ subroutine will return. This is called from call_function.
+
+ In RS/6000, struct return addresses are passed as an extra parameter in r3.
+ In function return, callee is not responsible of returning this address
+ back. Since gdb needs to find it, we will store in a designated variable
+ `rs6000_struct_return_address'. */
+
+static void
+rs6000_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
+{
+ write_register (3, addr);
+ rs6000_struct_return_address = addr;
+}
+
+/* Write into appropriate registers a function return value
+ of type TYPE, given in virtual format. */
+
+static void
+rs6000_store_return_value (struct type *type, char *valbuf)
+{
+ if (TYPE_CODE (type) == TYPE_CODE_FLT)
+
+ /* Floating point values are returned starting from FPR1 and up.
+ Say a double_double_double type could be returned in
+ FPR1/FPR2/FPR3 triple. */
+
+ write_register_bytes (REGISTER_BYTE (FP0_REGNUM + 1), valbuf,
+ TYPE_LENGTH (type));
+ else
+ /* Everything else is returned in GPR3 and up. */
+ write_register_bytes (REGISTER_BYTE (PPC_GP0_REGNUM + 3), valbuf,
+ TYPE_LENGTH (type));
+}
+
+/* Extract from an array REGBUF containing the (raw) register state
+ the address in which a function should return its structure value,
+ as a CORE_ADDR (or an expression that can be used as one). */
static CORE_ADDR
-find_toc_address (pc)
- CORE_ADDR pc;
+rs6000_extract_struct_value_address (char *regbuf)
+{
+ return rs6000_struct_return_address;
+}
+
+/* Return whether PC is in a dummy function call.
+
+ FIXME: This just checks for the end of the stack, which is broken
+ for things like stepping through gcc nested function stubs. */
+
+static int
+rs6000_pc_in_call_dummy (CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR fp)
{
- int ii, toc_entry, tocbase = 0;
+ return sp < pc && pc < fp;
+}
- for (ii=0; ii < loadinfotextindex; ++ii)
- if (pc > loadinfo[ii].textorg && loadinfo[ii].textorg > tocbase) {
- toc_entry = ii;
- tocbase = loadinfo[ii].textorg;
+/* Hook called when a new child process is started. */
+
+void
+rs6000_create_inferior (int pid)
+{
+ if (rs6000_set_host_arch_hook)
+ rs6000_set_host_arch_hook (pid);
+}
+\f
+/* Support for CONVERT_FROM_FUNC_PTR_ADDR(ADDR).
+
+ Usually a function pointer's representation is simply the address
+ of the function. On the RS/6000 however, a function pointer is
+ represented by a pointer to a TOC entry. This TOC entry contains
+ three words, the first word is the address of the function, the
+ second word is the TOC pointer (r2), and the third word is the
+ static chain value. Throughout GDB it is currently assumed that a
+ function pointer contains the address of the function, which is not
+ easy to fix. In addition, the conversion of a function address to
+ a function pointer would require allocation of a TOC entry in the
+ inferior's memory space, with all its drawbacks. To be able to
+ call C++ virtual methods in the inferior (which are called via
+ function pointers), find_function_addr uses this function to get the
+ function address from a function pointer. */
+
+/* Return real function address if ADDR (a function pointer) is in the data
+ space and is therefore a special function pointer. */
+
+CORE_ADDR
+rs6000_convert_from_func_ptr_addr (CORE_ADDR addr)
+{
+ struct obj_section *s;
+
+ s = find_pc_section (addr);
+ if (s && s->the_bfd_section->flags & SEC_CODE)
+ return addr;
+
+ /* ADDR is in the data space, so it's a special function pointer. */
+ return read_memory_addr (addr, TDEP->wordsize);
+}
+\f
+
+/* Handling the various POWER/PowerPC variants. */
+
+
+/* The arrays here called registers_MUMBLE hold information about available
+ registers.
+
+ For each family of PPC variants, I've tried to isolate out the
+ common registers and put them up front, so that as long as you get
+ the general family right, GDB will correctly identify the registers
+ common to that family. The common register sets are:
+
+ For the 60x family: hid0 hid1 iabr dabr pir
+
+ For the 505 and 860 family: eie eid nri
+
+ For the 403 and 403GC: icdbdr esr dear evpr cdbcr tsr tcr pit tbhi
+ tblo srr2 srr3 dbsr dbcr iac1 iac2 dac1 dac2 dccr iccr pbl1
+ pbu1 pbl2 pbu2
+
+ Most of these register groups aren't anything formal. I arrived at
+ them by looking at the registers that occurred in more than one
+ processor. */
+
+/* Convenience macros for populating register arrays. */
+
+/* Within another macro, convert S to a string. */
+
+#define STR(s) #s
+
+/* Return a struct reg defining register NAME that's 32 bits on 32-bit systems
+ and 64 bits on 64-bit systems. */
+#define R(name) { STR(name), 4, 8, 0 }
+
+/* Return a struct reg defining register NAME that's 32 bits on all
+ systems. */
+#define R4(name) { STR(name), 4, 4, 0 }
+
+/* Return a struct reg defining register NAME that's 64 bits on all
+ systems. */
+#define R8(name) { STR(name), 8, 8, 0 }
+
+/* Return a struct reg defining floating-point register NAME. */
+#define F(name) { STR(name), 8, 8, 1 }
+
+/* Return a struct reg defining register NAME that's 32 bits on 32-bit
+ systems and that doesn't exist on 64-bit systems. */
+#define R32(name) { STR(name), 4, 0, 0 }
+
+/* Return a struct reg defining register NAME that's 64 bits on 64-bit
+ systems and that doesn't exist on 32-bit systems. */
+#define R64(name) { STR(name), 0, 8, 0 }
+
+/* Return a struct reg placeholder for a register that doesn't exist. */
+#define R0 { 0, 0, 0, 0 }
+
+/* UISA registers common across all architectures, including POWER. */
+
+#define COMMON_UISA_REGS \
+ /* 0 */ R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), \
+ /* 8 */ R(r8), R(r9), R(r10),R(r11),R(r12),R(r13),R(r14),R(r15), \
+ /* 16 */ R(r16),R(r17),R(r18),R(r19),R(r20),R(r21),R(r22),R(r23), \
+ /* 24 */ R(r24),R(r25),R(r26),R(r27),R(r28),R(r29),R(r30),R(r31), \
+ /* 32 */ F(f0), F(f1), F(f2), F(f3), F(f4), F(f5), F(f6), F(f7), \
+ /* 40 */ F(f8), F(f9), F(f10),F(f11),F(f12),F(f13),F(f14),F(f15), \
+ /* 48 */ F(f16),F(f17),F(f18),F(f19),F(f20),F(f21),F(f22),F(f23), \
+ /* 56 */ F(f24),F(f25),F(f26),F(f27),F(f28),F(f29),F(f30),F(f31), \
+ /* 64 */ R(pc), R(ps)
+
+/* UISA-level SPRs for PowerPC. */
+#define PPC_UISA_SPRS \
+ /* 66 */ R4(cr), R(lr), R(ctr), R4(xer), R0
+
+/* Segment registers, for PowerPC. */
+#define PPC_SEGMENT_REGS \
+ /* 71 */ R32(sr0), R32(sr1), R32(sr2), R32(sr3), \
+ /* 75 */ R32(sr4), R32(sr5), R32(sr6), R32(sr7), \
+ /* 79 */ R32(sr8), R32(sr9), R32(sr10), R32(sr11), \
+ /* 83 */ R32(sr12), R32(sr13), R32(sr14), R32(sr15)
+
+/* OEA SPRs for PowerPC. */
+#define PPC_OEA_SPRS \
+ /* 87 */ R4(pvr), \
+ /* 88 */ R(ibat0u), R(ibat0l), R(ibat1u), R(ibat1l), \
+ /* 92 */ R(ibat2u), R(ibat2l), R(ibat3u), R(ibat3l), \
+ /* 96 */ R(dbat0u), R(dbat0l), R(dbat1u), R(dbat1l), \
+ /* 100 */ R(dbat2u), R(dbat2l), R(dbat3u), R(dbat3l), \
+ /* 104 */ R(sdr1), R64(asr), R(dar), R4(dsisr), \
+ /* 108 */ R(sprg0), R(sprg1), R(sprg2), R(sprg3), \
+ /* 112 */ R(srr0), R(srr1), R(tbl), R(tbu), \
+ /* 116 */ R4(dec), R(dabr), R4(ear)
+
+/* IBM POWER (pre-PowerPC) architecture, user-level view. We only cover
+ user-level SPR's. */
+static const struct reg registers_power[] =
+{
+ COMMON_UISA_REGS,
+ /* 66 */ R4(cnd), R(lr), R(cnt), R4(xer), R4(mq)
+};
+
+/* PowerPC UISA - a PPC processor as viewed by user-level code. A UISA-only
+ view of the PowerPC. */
+static const struct reg registers_powerpc[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS
+};
+
+/* IBM PowerPC 403. */
+static const struct reg registers_403[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(icdbdr), R(esr), R(dear), R(evpr),
+ /* 123 */ R(cdbcr), R(tsr), R(tcr), R(pit),
+ /* 127 */ R(tbhi), R(tblo), R(srr2), R(srr3),
+ /* 131 */ R(dbsr), R(dbcr), R(iac1), R(iac2),
+ /* 135 */ R(dac1), R(dac2), R(dccr), R(iccr),
+ /* 139 */ R(pbl1), R(pbu1), R(pbl2), R(pbu2)
+};
+
+/* IBM PowerPC 403GC. */
+static const struct reg registers_403GC[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(icdbdr), R(esr), R(dear), R(evpr),
+ /* 123 */ R(cdbcr), R(tsr), R(tcr), R(pit),
+ /* 127 */ R(tbhi), R(tblo), R(srr2), R(srr3),
+ /* 131 */ R(dbsr), R(dbcr), R(iac1), R(iac2),
+ /* 135 */ R(dac1), R(dac2), R(dccr), R(iccr),
+ /* 139 */ R(pbl1), R(pbu1), R(pbl2), R(pbu2),
+ /* 143 */ R(zpr), R(pid), R(sgr), R(dcwr),
+ /* 147 */ R(tbhu), R(tblu)
+};
+
+/* Motorola PowerPC 505. */
+static const struct reg registers_505[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(eie), R(eid), R(nri)
+};
+
+/* Motorola PowerPC 860 or 850. */
+static const struct reg registers_860[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(eie), R(eid), R(nri), R(cmpa),
+ /* 123 */ R(cmpb), R(cmpc), R(cmpd), R(icr),
+ /* 127 */ R(der), R(counta), R(countb), R(cmpe),
+ /* 131 */ R(cmpf), R(cmpg), R(cmph), R(lctrl1),
+ /* 135 */ R(lctrl2), R(ictrl), R(bar), R(ic_cst),
+ /* 139 */ R(ic_adr), R(ic_dat), R(dc_cst), R(dc_adr),
+ /* 143 */ R(dc_dat), R(dpdr), R(dpir), R(immr),
+ /* 147 */ R(mi_ctr), R(mi_ap), R(mi_epn), R(mi_twc),
+ /* 151 */ R(mi_rpn), R(md_ctr), R(m_casid), R(md_ap),
+ /* 155 */ R(md_epn), R(md_twb), R(md_twc), R(md_rpn),
+ /* 159 */ R(m_tw), R(mi_dbcam), R(mi_dbram0), R(mi_dbram1),
+ /* 163 */ R(md_dbcam), R(md_dbram0), R(md_dbram1)
+};
+
+/* Motorola PowerPC 601. Note that the 601 has different register numbers
+ for reading and writing RTCU and RTCL. However, how one reads and writes a
+ register is the stub's problem. */
+static const struct reg registers_601[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr),
+ /* 123 */ R(pir), R(mq), R(rtcu), R(rtcl)
+};
+
+/* Motorola PowerPC 602. */
+static const struct reg registers_602[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(hid0), R(hid1), R(iabr), R0,
+ /* 123 */ R0, R(tcr), R(ibr), R(esassr),
+ /* 127 */ R(sebr), R(ser), R(sp), R(lt)
+};
+
+/* Motorola/IBM PowerPC 603 or 603e. */
+static const struct reg registers_603[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(hid0), R(hid1), R(iabr), R0,
+ /* 123 */ R0, R(dmiss), R(dcmp), R(hash1),
+ /* 127 */ R(hash2), R(imiss), R(icmp), R(rpa)
+};
+
+/* Motorola PowerPC 604 or 604e. */
+static const struct reg registers_604[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr),
+ /* 123 */ R(pir), R(mmcr0), R(pmc1), R(pmc2),
+ /* 127 */ R(sia), R(sda)
+};
+
+/* Motorola/IBM PowerPC 750 or 740. */
+static const struct reg registers_750[] =
+{
+ COMMON_UISA_REGS,
+ PPC_UISA_SPRS,
+ PPC_SEGMENT_REGS,
+ PPC_OEA_SPRS,
+ /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr),
+ /* 123 */ R0, R(ummcr0), R(upmc1), R(upmc2),
+ /* 127 */ R(usia), R(ummcr1), R(upmc3), R(upmc4),
+ /* 131 */ R(mmcr0), R(pmc1), R(pmc2), R(sia),
+ /* 135 */ R(mmcr1), R(pmc3), R(pmc4), R(l2cr),
+ /* 139 */ R(ictc), R(thrm1), R(thrm2), R(thrm3)
+};
+
+
+/* Information about a particular processor variant. */
+
+struct variant
+ {
+ /* Name of this variant. */
+ char *name;
+
+ /* English description of the variant. */
+ char *description;
+
+ /* bfd_arch_info.arch corresponding to variant. */
+ enum bfd_architecture arch;
+
+ /* bfd_arch_info.mach corresponding to variant. */
+ unsigned long mach;
+
+ /* Table of register names; registers[R] is the name of the register
+ number R. */
+ int nregs;
+ const struct reg *regs;
+ };
+
+#define num_registers(list) (sizeof (list) / sizeof((list)[0]))
+
+
+/* Information in this table comes from the following web sites:
+ IBM: http://www.chips.ibm.com:80/products/embedded/
+ Motorola: http://www.mot.com/SPS/PowerPC/
+
+ I'm sure I've got some of the variant descriptions not quite right.
+ Please report any inaccuracies you find to GDB's maintainer.
+
+ If you add entries to this table, please be sure to allow the new
+ value as an argument to the --with-cpu flag, in configure.in. */
+
+static const struct variant variants[] =
+{
+ {"powerpc", "PowerPC user-level", bfd_arch_powerpc,
+ bfd_mach_ppc, num_registers (registers_powerpc), registers_powerpc},
+ {"power", "POWER user-level", bfd_arch_rs6000,
+ bfd_mach_rs6k, num_registers (registers_power), registers_power},
+ {"403", "IBM PowerPC 403", bfd_arch_powerpc,
+ bfd_mach_ppc_403, num_registers (registers_403), registers_403},
+ {"601", "Motorola PowerPC 601", bfd_arch_powerpc,
+ bfd_mach_ppc_601, num_registers (registers_601), registers_601},
+ {"602", "Motorola PowerPC 602", bfd_arch_powerpc,
+ bfd_mach_ppc_602, num_registers (registers_602), registers_602},
+ {"603", "Motorola/IBM PowerPC 603 or 603e", bfd_arch_powerpc,
+ bfd_mach_ppc_603, num_registers (registers_603), registers_603},
+ {"604", "Motorola PowerPC 604 or 604e", bfd_arch_powerpc,
+ 604, num_registers (registers_604), registers_604},
+ {"403GC", "IBM PowerPC 403GC", bfd_arch_powerpc,
+ bfd_mach_ppc_403gc, num_registers (registers_403GC), registers_403GC},
+ {"505", "Motorola PowerPC 505", bfd_arch_powerpc,
+ bfd_mach_ppc_505, num_registers (registers_505), registers_505},
+ {"860", "Motorola PowerPC 860 or 850", bfd_arch_powerpc,
+ bfd_mach_ppc_860, num_registers (registers_860), registers_860},
+ {"750", "Motorola/IBM PowerPC 750 or 740", bfd_arch_powerpc,
+ bfd_mach_ppc_750, num_registers (registers_750), registers_750},
+
+ /* FIXME: I haven't checked the register sets of the following. */
+ {"620", "Motorola PowerPC 620", bfd_arch_powerpc,
+ bfd_mach_ppc_620, num_registers (registers_powerpc), registers_powerpc},
+ {"a35", "PowerPC A35", bfd_arch_powerpc,
+ bfd_mach_ppc_a35, num_registers (registers_powerpc), registers_powerpc},
+ {"rs1", "IBM POWER RS1", bfd_arch_rs6000,
+ bfd_mach_rs6k_rs1, num_registers (registers_power), registers_power},
+ {"rsc", "IBM POWER RSC", bfd_arch_rs6000,
+ bfd_mach_rs6k_rsc, num_registers (registers_power), registers_power},
+ {"rs2", "IBM POWER RS2", bfd_arch_rs6000,
+ bfd_mach_rs6k_rs2, num_registers (registers_power), registers_power},
+
+ {0, 0, 0, 0}
+};
+
+#undef num_registers
+
+/* Look up the variant named NAME in the `variants' table. Return a
+ pointer to the struct variant, or null if we couldn't find it. */
+
+static const struct variant *
+find_variant_by_name (char *name)
+{
+ const struct variant *v;
+
+ for (v = variants; v->name; v++)
+ if (!strcmp (name, v->name))
+ return v;
+
+ return NULL;
+}
+
+/* Return the variant corresponding to architecture ARCH and machine number
+ MACH. If no such variant exists, return null. */
+
+static const struct variant *
+find_variant_by_arch (enum bfd_architecture arch, unsigned long mach)
+{
+ const struct variant *v;
+
+ for (v = variants; v->name; v++)
+ if (arch == v->arch && mach == v->mach)
+ return v;
+
+ return NULL;
+}
+
+
+
+\f
+static void
+process_note_abi_tag_sections (bfd *abfd, asection *sect, void *obj)
+{
+ int *os_ident_ptr = obj;
+ const char *name;
+ unsigned int sectsize;
+
+ name = bfd_get_section_name (abfd, sect);
+ sectsize = bfd_section_size (abfd, sect);
+ if (strcmp (name, ".note.ABI-tag") == 0 && sectsize > 0)
+ {
+ unsigned int name_length, data_length, note_type;
+ char *note = alloca (sectsize);
+
+ bfd_get_section_contents (abfd, sect, note,
+ (file_ptr) 0, (bfd_size_type) sectsize);
+
+ name_length = bfd_h_get_32 (abfd, note);
+ data_length = bfd_h_get_32 (abfd, note + 4);
+ note_type = bfd_h_get_32 (abfd, note + 8);
+
+ if (name_length == 4 && data_length == 16 && note_type == 1
+ && strcmp (note + 12, "GNU") == 0)
+ {
+ int os_number = bfd_h_get_32 (abfd, note + 16);
+
+ /* The case numbers are from abi-tags in glibc */
+ switch (os_number)
+ {
+ case 0 :
+ *os_ident_ptr = ELFOSABI_LINUX;
+ break;
+ case 1 :
+ *os_ident_ptr = ELFOSABI_HURD;
+ break;
+ case 2 :
+ *os_ident_ptr = ELFOSABI_SOLARIS;
+ break;
+ default :
+ internal_error (
+ "process_note_abi_sections: unknown OS number %d", os_number);
+ break;
+ }
+ }
+ }
+}
+
+/* Return one of the ELFOSABI_ constants for BFDs representing ELF
+ executables. If it's not an ELF executable or if the OS/ABI couldn't
+ be determined, simply return -1. */
+
+static int
+get_elfosabi (bfd *abfd)
+{
+ int elfosabi = -1;
+
+ if (abfd != NULL && bfd_get_flavour (abfd) == bfd_target_elf_flavour)
+ {
+ elfosabi = elf_elfheader (abfd)->e_ident[EI_OSABI];
+
+ /* When elfosabi is 0 (ELFOSABI_NONE), this is supposed to indicate
+ that we're on a SYSV system. However, GNU/Linux uses a note section
+ to record OS/ABI info, but leaves e_ident[EI_OSABI] zero. So we
+ have to check the note sections too. */
+ if (elfosabi == 0)
+ {
+ bfd_map_over_sections (abfd,
+ process_note_abi_tag_sections,
+ &elfosabi);
+ }
}
- return loadinfo[toc_entry].dataorg + loadinfo[toc_entry].toc_offset;
+ return elfosabi;
}
-#ifdef GDB_TARGET_POWERPC
-int
-gdb_print_insn_powerpc (memaddr, info)
- bfd_vma memaddr;
- disassemble_info *info;
+\f
+
+/* Initialize the current architecture based on INFO. If possible, re-use an
+ architecture from ARCHES, which is a list of architectures already created
+ during this debugging session.
+
+ Called e.g. at program startup, when reading a core file, and when reading
+ a binary file. */
+
+static struct gdbarch *
+rs6000_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
{
- if (TARGET_BYTE_ORDER == BIG_ENDIAN)
- return print_insn_big_powerpc (memaddr, info);
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
+ int wordsize, from_xcoff_exec, from_elf_exec, power, i, off;
+ struct reg *regs;
+ const struct variant *v;
+ enum bfd_architecture arch;
+ unsigned long mach;
+ bfd abfd;
+ int osabi, sysv_abi;
+
+ from_xcoff_exec = info.abfd && info.abfd->format == bfd_object &&
+ bfd_get_flavour (info.abfd) == bfd_target_xcoff_flavour;
+
+ from_elf_exec = info.abfd && info.abfd->format == bfd_object &&
+ bfd_get_flavour (info.abfd) == bfd_target_elf_flavour;
+
+ sysv_abi = info.abfd && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour;
+
+ osabi = get_elfosabi (info.abfd);
+
+ /* Check word size. If INFO is from a binary file, infer it from that,
+ else use the previously-inferred size. */
+ if (from_xcoff_exec)
+ {
+ if (xcoff_data (info.abfd)->xcoff64)
+ wordsize = 8;
+ else
+ wordsize = 4;
+ }
+ else if (from_elf_exec)
+ {
+ if (elf_elfheader (info.abfd)->e_ident[EI_CLASS] == ELFCLASS64)
+ wordsize = 8;
+ else
+ wordsize = 4;
+ }
+ else
+ {
+ tdep = TDEP;
+ if (tdep)
+ wordsize = tdep->wordsize;
+ else
+ wordsize = 4;
+ }
+
+ /* Find a candidate among extant architectures. */
+ for (arches = gdbarch_list_lookup_by_info (arches, &info);
+ arches != NULL;
+ arches = gdbarch_list_lookup_by_info (arches->next, &info))
+ {
+ /* Word size in the various PowerPC bfd_arch_info structs isn't
+ meaningful, because 64-bit CPUs can run in 32-bit mode. So, perform
+ separate word size check. */
+ tdep = gdbarch_tdep (arches->gdbarch);
+ if (tdep && tdep->wordsize == wordsize && tdep->osabi == osabi)
+ return arches->gdbarch;
+ }
+
+ /* None found, create a new architecture from INFO, whose bfd_arch_info
+ validity depends on the source:
+ - executable useless
+ - rs6000_host_arch() good
+ - core file good
+ - "set arch" trust blindly
+ - GDB startup useless but harmless */
+
+ if (!from_xcoff_exec)
+ {
+ arch = info.bfd_architecture;
+ mach = info.bfd_arch_info->mach;
+ }
+ else
+ {
+ arch = bfd_arch_powerpc;
+ mach = 0;
+ bfd_default_set_arch_mach (&abfd, arch, mach);
+ info.bfd_arch_info = bfd_get_arch_info (&abfd);
+ }
+ tdep = xmalloc (sizeof (struct gdbarch_tdep));
+ tdep->wordsize = wordsize;
+ tdep->osabi = osabi;
+ gdbarch = gdbarch_alloc (&info, tdep);
+ power = arch == bfd_arch_rs6000;
+
+ /* Select instruction printer. */
+ tm_print_insn = arch == power ? print_insn_rs6000 :
+ info.byte_order == BIG_ENDIAN ? print_insn_big_powerpc :
+ print_insn_little_powerpc;
+
+ /* Choose variant. */
+ v = find_variant_by_arch (arch, mach);
+ if (!v)
+ v = find_variant_by_name (power ? "power" : "powerpc");
+ tdep->regs = v->regs;
+
+ /* Calculate byte offsets in raw register array. */
+ tdep->regoff = xmalloc (v->nregs * sizeof (int));
+ for (i = off = 0; i < v->nregs; i++)
+ {
+ tdep->regoff[i] = off;
+ off += regsize (v->regs + i, wordsize);
+ }
+
+ set_gdbarch_read_pc (gdbarch, generic_target_read_pc);
+ set_gdbarch_write_pc (gdbarch, generic_target_write_pc);
+ set_gdbarch_read_fp (gdbarch, generic_target_read_fp);
+ set_gdbarch_write_fp (gdbarch, generic_target_write_fp);
+ set_gdbarch_read_sp (gdbarch, generic_target_read_sp);
+ set_gdbarch_write_sp (gdbarch, generic_target_write_sp);
+
+ set_gdbarch_num_regs (gdbarch, v->nregs);
+ set_gdbarch_sp_regnum (gdbarch, 1);
+ set_gdbarch_fp_regnum (gdbarch, 1);
+ set_gdbarch_pc_regnum (gdbarch, 64);
+ set_gdbarch_register_name (gdbarch, rs6000_register_name);
+ set_gdbarch_register_size (gdbarch, wordsize);
+ set_gdbarch_register_bytes (gdbarch, off);
+ set_gdbarch_register_byte (gdbarch, rs6000_register_byte);
+ set_gdbarch_register_raw_size (gdbarch, rs6000_register_raw_size);
+ set_gdbarch_max_register_raw_size (gdbarch, 8);
+ set_gdbarch_register_virtual_size (gdbarch, rs6000_register_virtual_size);
+ set_gdbarch_max_register_virtual_size (gdbarch, 8);
+ set_gdbarch_register_virtual_type (gdbarch, rs6000_register_virtual_type);
+
+ set_gdbarch_ptr_bit (gdbarch, wordsize * TARGET_CHAR_BIT);
+ set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_int_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_long_bit (gdbarch, wordsize * TARGET_CHAR_BIT);
+ set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+ set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+ set_gdbarch_long_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+
+ set_gdbarch_use_generic_dummy_frames (gdbarch, 1);
+ set_gdbarch_call_dummy_length (gdbarch, 0);
+ set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT);
+ set_gdbarch_call_dummy_address (gdbarch, entry_point_address);
+ set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1);
+ set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0);
+ set_gdbarch_call_dummy_start_offset (gdbarch, 0);
+ set_gdbarch_pc_in_call_dummy (gdbarch, generic_pc_in_call_dummy);
+ set_gdbarch_call_dummy_p (gdbarch, 1);
+ set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0);
+ set_gdbarch_get_saved_register (gdbarch, generic_get_saved_register);
+ set_gdbarch_fix_call_dummy (gdbarch, rs6000_fix_call_dummy);
+ set_gdbarch_push_dummy_frame (gdbarch, generic_push_dummy_frame);
+ set_gdbarch_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos);
+ set_gdbarch_push_return_address (gdbarch, ppc_push_return_address);
+ set_gdbarch_believe_pcc_promotion (gdbarch, 1);
+ set_gdbarch_coerce_float_to_double (gdbarch, rs6000_coerce_float_to_double);
+
+ set_gdbarch_register_convertible (gdbarch, rs6000_register_convertible);
+ set_gdbarch_register_convert_to_virtual (gdbarch, rs6000_register_convert_to_virtual);
+ set_gdbarch_register_convert_to_raw (gdbarch, rs6000_register_convert_to_raw);
+
+ set_gdbarch_extract_return_value (gdbarch, rs6000_extract_return_value);
+
+ if (sysv_abi)
+ set_gdbarch_push_arguments (gdbarch, ppc_sysv_abi_push_arguments);
+ else
+ set_gdbarch_push_arguments (gdbarch, rs6000_push_arguments);
+
+ set_gdbarch_store_struct_return (gdbarch, rs6000_store_struct_return);
+ set_gdbarch_store_return_value (gdbarch, rs6000_store_return_value);
+ set_gdbarch_extract_struct_value_address (gdbarch, rs6000_extract_struct_value_address);
+ set_gdbarch_use_struct_convention (gdbarch, generic_use_struct_convention);
+
+ set_gdbarch_pop_frame (gdbarch, rs6000_pop_frame);
+
+ set_gdbarch_skip_prologue (gdbarch, rs6000_skip_prologue);
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+ set_gdbarch_decr_pc_after_break (gdbarch, 0);
+ set_gdbarch_function_start_offset (gdbarch, 0);
+ set_gdbarch_breakpoint_from_pc (gdbarch, rs6000_breakpoint_from_pc);
+
+ /* Not sure on this. FIXMEmgo */
+ set_gdbarch_frame_args_skip (gdbarch, 8);
+
+ set_gdbarch_frame_chain_valid (gdbarch, file_frame_chain_valid);
+ if (osabi == ELFOSABI_LINUX)
+ {
+ set_gdbarch_frameless_function_invocation (gdbarch,
+ ppc_linux_frameless_function_invocation);
+ set_gdbarch_frame_chain (gdbarch, ppc_linux_frame_chain);
+ set_gdbarch_frame_saved_pc (gdbarch, ppc_linux_frame_saved_pc);
+
+ set_gdbarch_frame_init_saved_regs (gdbarch,
+ ppc_linux_frame_init_saved_regs);
+ set_gdbarch_init_extra_frame_info (gdbarch,
+ ppc_linux_init_extra_frame_info);
+
+ set_gdbarch_memory_remove_breakpoint (gdbarch,
+ ppc_linux_memory_remove_breakpoint);
+ }
else
- return print_insn_little_powerpc (memaddr, info);
+ {
+ set_gdbarch_frameless_function_invocation (gdbarch,
+ rs6000_frameless_function_invocation);
+ set_gdbarch_frame_chain (gdbarch, rs6000_frame_chain);
+ set_gdbarch_frame_saved_pc (gdbarch, rs6000_frame_saved_pc);
+
+ set_gdbarch_frame_init_saved_regs (gdbarch, rs6000_frame_init_saved_regs);
+ set_gdbarch_init_extra_frame_info (gdbarch, rs6000_init_extra_frame_info);
+
+ /* Handle RS/6000 function pointers. */
+ set_gdbarch_convert_from_func_ptr_addr (gdbarch,
+ rs6000_convert_from_func_ptr_addr);
+ }
+ set_gdbarch_frame_args_address (gdbarch, rs6000_frame_args_address);
+ set_gdbarch_frame_locals_address (gdbarch, rs6000_frame_args_address);
+ set_gdbarch_saved_pc_after_call (gdbarch, rs6000_saved_pc_after_call);
+
+ /* We can't tell how many args there are
+ now that the C compiler delays popping them. */
+ set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
+
+ return gdbarch;
}
-#endif
+
+/* Initialization code. */
void
-_initialize_rs6000_tdep ()
+_initialize_rs6000_tdep (void)
{
- /* FIXME, this should not be decided via ifdef. */
-#ifdef GDB_TARGET_POWERPC
- tm_print_insn = gdb_print_insn_powerpc;
-#else
- tm_print_insn = print_insn_rs6000;
-#endif
+ register_gdbarch_init (bfd_arch_rs6000, rs6000_gdbarch_init);
+ register_gdbarch_init (bfd_arch_powerpc, rs6000_gdbarch_init);
}