}
};
-static int dos_open (serial_t scb, const char *name);
-static void dos_raw (serial_t scb);
-static int dos_readchar (serial_t scb, int timeout);
-static int dos_setbaudrate (serial_t scb, int rate);
-static int dos_write (serial_t scb, const char *str, int len);
-static void dos_close (serial_t scb);
-static serial_ttystate dos_get_tty_state (serial_t scb);
-static int dos_set_tty_state (serial_t scb, serial_ttystate state);
+static int dos_open (struct serial *scb, const char *name);
+static void dos_raw (struct serial *scb);
+static int dos_readchar (struct serial *scb, int timeout);
+static int dos_setbaudrate (struct serial *scb, int rate);
+static int dos_write (struct serial *scb, const char *str, int len);
+static void dos_close (struct serial *scb);
+static serial_ttystate dos_get_tty_state (struct serial *scb);
+static int dos_set_tty_state (struct serial *scb, serial_ttystate state);
static int dos_baudconv (int rate);
#define inb(p,a) inportb((p)->base + (a))
#define ISRNAME(x) dos_comisr##x
#define ISR(x) static void ISRNAME(x)(void) {dos_comisr(x);}
-ISR (0) ISR (1) ISR (2) ISR (3)
-ISR (4) ISR (5) ISR (6) ISR (7)
+ISR (0) ISR (1) ISR (2) ISR (3) /* OK */
+ISR (4) ISR (5) ISR (6) ISR (7) /* OK */
typedef void (*isr_t) (void);
static int
-dos_open (serial_t scb, const char *name)
+dos_open (struct serial *scb, const char *name)
{
struct dos_ttystate *port;
int fd, i;
static void
-dos_close (serial_t scb)
+dos_close (struct serial *scb)
{
struct dos_ttystate *port;
struct intrupt *intrupt;
static int
-dos_noop (serial_t scb)
+dos_noop (struct serial *scb)
{
return 0;
}
static void
-dos_raw (serial_t scb)
+dos_raw (struct serial *scb)
{
/* Always in raw mode */
}
static int
-dos_readchar (serial_t scb, int timeout)
+dos_readchar (struct serial *scb, int timeout)
{
struct dos_ttystate *port = &ports[scb->fd];
long then;
{
if (timeout >= 0 && (rawclock () - then) >= 0)
return SERIAL_TIMEOUT;
- notice_quit ();
}
return c;
static serial_ttystate
-dos_get_tty_state (serial_t scb)
+dos_get_tty_state (struct serial *scb)
{
struct dos_ttystate *port = &ports[scb->fd];
struct dos_ttystate *state;
}
static int
-dos_set_tty_state (serial_t scb, serial_ttystate ttystate)
+dos_set_tty_state (struct serial *scb, serial_ttystate ttystate)
{
struct dos_ttystate *state;
}
static int
-dos_noflush_set_tty_state (serial_t scb, serial_ttystate new_ttystate,
+dos_noflush_set_tty_state (struct serial *scb, serial_ttystate new_ttystate,
serial_ttystate old_ttystate)
{
struct dos_ttystate *state;
}
static int
-dos_flush_input (serial_t scb)
+dos_flush_input (struct serial *scb)
{
struct dos_ttystate *port = &ports[scb->fd];
disable ();
}
static void
-dos_print_tty_state (serial_t scb, serial_ttystate ttystate,
+dos_print_tty_state (struct serial *scb, serial_ttystate ttystate,
struct ui_file *stream)
{
/* Nothing to print */
static int
-dos_setbaudrate (serial_t scb, int rate)
+dos_setbaudrate (struct serial *scb, int rate)
{
struct dos_ttystate *port = &ports[scb->fd];
}
static int
-dos_setstopbits (serial_t scb, int num)
+dos_setstopbits (struct serial *scb, int num)
{
struct dos_ttystate *port = &ports[scb->fd];
unsigned char cfcr;
}
static int
-dos_write (serial_t scb, const char *str, int len)
+dos_write (struct serial *scb, const char *str, int len)
{
volatile struct dos_ttystate *port = &ports[scb->fd];
int fifosize = port->fifo ? 16 : 1;
static int
-dos_sendbreak (serial_t scb)
+dos_sendbreak (struct serial *scb)
{
volatile struct dos_ttystate *port = &ports[scb->fd];
unsigned char cfcr;
dos_setbaudrate,
dos_setstopbits,
dos_noop, /* wait for output to drain */
- (void (*)(serial_t, int))NULL /* change into async mode */
+ (void (*)(struct serial *, int))NULL /* change into async mode */
};
intrupts[1].inuse = /* keyboard */
intrupts[2].inuse = 1; /* slave icu */
- add_show_from_set (
- add_set_cmd ("com1base", class_obscure, var_zinteger,
- (char *) &ports[0].base,
- "Set COM1 base i/o port address.",
- &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("com1irq", class_obscure, var_zinteger,
- (char *) &ports[0].irq,
- "Set COM1 interrupt request.",
- &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("com2base", class_obscure, var_zinteger,
- (char *) &ports[1].base,
- "Set COM2 base i/o port address.",
- &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("com2irq", class_obscure, var_zinteger,
- (char *) &ports[1].irq,
- "Set COM2 interrupt request.",
- &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("com3base", class_obscure, var_zinteger,
- (char *) &ports[2].base,
- "Set COM3 base i/o port address.",
- &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("com3irq", class_obscure, var_zinteger,
- (char *) &ports[2].irq,
- "Set COM3 interrupt request.",
- &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("com4base", class_obscure, var_zinteger,
- (char *) &ports[3].base,
- "Set COM4 base i/o port address.",
- &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("com4irq", class_obscure, var_zinteger,
- (char *) &ports[3].irq,
- "Set COM4 interrupt request.",
- &setlist),
- &showlist);
+ add_setshow_zinteger_cmd ("com1base", class_obscure, &ports[0].base, _("\
+Set COM1 base i/o port address."), _("\
+Show COM1 base i/o port address."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("com1irq", class_obscure, &ports[0].irq, _("\
+Set COM1 interrupt request."), _("\
+Show COM1 interrupt request."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("com2base", class_obscure, &ports[1].base, _("\
+Set COM2 base i/o port address."), _("\
+Show COM2 base i/o port address."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("com2irq", class_obscure, &ports[1].irq, _("\
+Set COM2 interrupt request."), _("\
+Show COM2 interrupt request."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("com3base", class_obscure, &ports[2].base, _("\
+Set COM3 base i/o port address."), _("\
+Show COM3 base i/o port address."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("com3irq", class_obscure, &ports[2].irq, _("\
+Set COM3 interrupt request."), _("\
+Show COM3 interrupt request."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("com4base", class_obscure, &ports[3].base, _("\
+Set COM4 base i/o port address."), _("\
+Show COM4 base i/o port address."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("com4irq", class_obscure, &ports[3].irq, _("\
+Set COM4 interrupt request."), _("\
+Show COM4 interrupt request."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
add_info ("serial", dos_info,
- "Print DOS serial port status.");
+ _("Print DOS serial port status."));
}