/* Serial interface for local (hardwired) serial ports on Un*x like systems
- Copyright 1992, 1993 Free Software Foundation, Inc.
+ Copyright 1992, 1993, 1994, 1998 Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "serial.h"
#include <fcntl.h>
#include <sys/types.h>
-
-#if !defined (HAVE_TERMIOS) && !defined (HAVE_TERMIO) && !defined (HAVE_SGTTY)
-#define HAVE_SGTTY
+#include "terminal.h"
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
#endif
#ifdef HAVE_TERMIOS
-#include <termios.h>
-#include <unistd.h>
struct hardwire_ttystate
{
#endif /* termios */
#ifdef HAVE_TERMIO
-#include <termio.h>
/* It is believed that all systems which have added job control to SVR3
(e.g. sco) have also added termios. Even if not, trying to figure out
too if it existed on all systems. */
#include <sys/time.h>
-#include <sgtty.h>
-
struct hardwire_ttystate
{
struct sgttyb sgttyb;
static int rate_to_code PARAMS ((int rate));
static int hardwire_setbaudrate PARAMS ((serial_t scb, int rate));
static int hardwire_write PARAMS ((serial_t scb, const char *str, int len));
-/* FIXME: static void hardwire_restore PARAMS ((serial_t scb)); */
static void hardwire_close PARAMS ((serial_t scb));
static int get_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state));
static int set_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state));
static serial_ttystate hardwire_get_tty_state PARAMS ((serial_t scb));
static int hardwire_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
+static int hardwire_noflush_set_tty_state PARAMS ((serial_t, serial_ttystate,
+ serial_ttystate));
+static void hardwire_print_tty_state PARAMS ((serial_t, serial_ttystate));
+static int hardwire_drain_output PARAMS ((serial_t));
+static int hardwire_flush_output PARAMS ((serial_t));
+static int hardwire_flush_input PARAMS ((serial_t));
+static int hardwire_send_break PARAMS ((serial_t));
+static int hardwire_setstopbits PARAMS ((serial_t, int));
+
+void _initialize_ser_hardwire PARAMS ((void));
+
+#ifdef __CYGWIN__
+extern void (*ui_loop_hook) PARAMS ((int));
+#endif
/* Open up a real live device for serial I/O */
}
static int
-get_tty_state(scb, state)
+get_tty_state (scb, state)
serial_t scb;
struct hardwire_ttystate *state;
{
#ifdef HAVE_TERMIOS
- extern int errno;
-
if (tcgetattr(scb->fd, &state->termios) < 0)
return -1;
#ifdef HAVE_SGTTY
if (ioctl (scb->fd, TIOCSETN, &state->sgttyb) < 0)
return -1;
+ if (ioctl (scb->fd, TIOCSETC, &state->tc) < 0)
+ return -1;
+ if (ioctl (scb->fd, TIOCSLTC, &state->ltc) < 0)
+ return -1;
+ if (ioctl (scb->fd, TIOCLSET, &state->lmode) < 0)
+ return -1;
return 0;
#endif
serial_ttystate old_ttystate;
{
struct hardwire_ttystate new_state;
+#ifdef HAVE_SGTTY
struct hardwire_ttystate *state = (struct hardwire_ttystate *) old_ttystate;
+#endif
new_state = *(struct hardwire_ttystate *)new_ttystate;
-#ifdef HAVE_TERMIOS
- /* I'm not sure whether this is necessary; the manpage makes no mention
- of discarding input when switching to/from ICANON. */
- if (state->termios.c_lflag & ICANON)
- new_state.termios.c_lflag |= ICANON;
- else
- new_state.termios.c_lflag &= ~ICANON;
-#endif
-
-#ifdef HAVE_TERMIO
- /* I'm not sure whether this is necessary; the manpage makes no mention
- of discarding input when switching to/from ICANON. */
- if (state->termio.c_lflag & ICANON)
- new_state.termio.c_lflag |= ICANON;
- else
- new_state.termio.c_lflag &= ~ICANON;
-#endif
+ /* Don't change in or out of raw mode; we don't want to flush input.
+ termio and termios have no such restriction; for them flushing input
+ is separate from setting the attributes. */
#ifdef HAVE_SGTTY
if (state->sgttyb.sg_flags & RAW)
#endif
}
+/* Wait for the output to drain away, as opposed to flushing (discarding) it */
+
+static int
+hardwire_drain_output (scb)
+ serial_t scb;
+{
+#ifdef HAVE_TERMIOS
+ return tcdrain (scb->fd);
+#endif
+
+#ifdef HAVE_TERMIO
+ return ioctl (scb->fd, TCSBRK, 1);
+#endif
+
+#ifdef HAVE_SGTTY
+ /* Get the current state and then restore it using TIOCSETP,
+ which should cause the output to drain and pending input
+ to be discarded. */
+ {
+ struct hardwire_ttystate state;
+ if (get_tty_state (scb, &state))
+ {
+ return (-1);
+ }
+ else
+ {
+ return (ioctl (scb->fd, TIOCSETP, &state.sgttyb));
+ }
+ }
+#endif
+}
+
static int
hardwire_flush_output (scb)
serial_t scb;
hardwire_flush_input (scb)
serial_t scb;
{
+ scb->bufcnt = 0;
+ scb->bufp = scb->buf;
+
#ifdef HAVE_TERMIOS
return tcflush (scb->fd, TCIFLUSH);
#endif
struct hardwire_ttystate state;
if (get_tty_state(scb, &state))
- fprintf(stderr, "get_tty_state failed: %s\n", safe_strerror(errno));
+ fprintf_unfiltered(gdb_stderr, "get_tty_state failed: %s\n", safe_strerror(errno));
#ifdef HAVE_TERMIOS
state.termios.c_iflag = 0;
state.termios.c_oflag = 0;
state.termios.c_lflag = 0;
state.termios.c_cflag &= ~(CSIZE|PARENB);
- state.termios.c_cflag |= CS8;
+ state.termios.c_cflag |= CLOCAL | CS8;
state.termios.c_cc[VMIN] = 0;
state.termios.c_cc[VTIME] = 0;
#endif
state.termio.c_oflag = 0;
state.termio.c_lflag = 0;
state.termio.c_cflag &= ~(CSIZE|PARENB);
- state.termio.c_cflag |= CS8;
+ state.termio.c_cflag |= CLOCAL | CS8;
state.termio.c_cc[VMIN] = 0;
state.termio.c_cc[VTIME] = 0;
#endif
scb->current_timeout = 0;
if (set_tty_state (scb, &state))
- fprintf(stderr, "set_tty_state failed: %s\n", safe_strerror(errno));
+ fprintf_unfiltered(gdb_stderr, "set_tty_state failed: %s\n", safe_strerror(errno));
}
/* Wait for input on scb, with timeout seconds. Returns 0 on success,
serial_t scb;
int timeout;
{
-#ifdef HAVE_SGTTY
- struct timeval tv;
- fd_set readfds;
+#ifndef __CYGWIN__
+ scb->timeout_remaining = 0;
+#endif
- FD_ZERO (&readfds);
+#ifdef HAVE_SGTTY
+ {
+ struct timeval tv;
+ fd_set readfds;
- tv.tv_sec = timeout;
- tv.tv_usec = 0;
+ FD_ZERO (&readfds);
- FD_SET(scb->fd, &readfds);
+ tv.tv_sec = timeout;
+ tv.tv_usec = 0;
- while (1)
- {
- int numfds;
-
- if (timeout >= 0)
- numfds = select(scb->fd+1, &readfds, 0, 0, &tv);
- else
- numfds = select(scb->fd+1, &readfds, 0, 0, 0);
-
- if (numfds <= 0)
- if (numfds == 0)
- return SERIAL_TIMEOUT;
- else if (errno == EINTR)
- continue;
- else
- return SERIAL_ERROR; /* Got an error from select or poll */
+ FD_SET(scb->fd, &readfds);
- return 0;
- }
+ while (1)
+ {
+ int numfds;
+ if (timeout >= 0)
+ numfds = select(scb->fd+1, &readfds, 0, 0, &tv);
+ else
+ numfds = select(scb->fd+1, &readfds, 0, 0, 0);
+
+ if (numfds <= 0)
+ if (numfds == 0)
+ return SERIAL_TIMEOUT;
+ else if (errno == EINTR)
+ continue;
+ else
+ return SERIAL_ERROR; /* Got an error from select or poll */
+
+ return 0;
+ }
+ }
#endif /* HAVE_SGTTY */
#if defined HAVE_TERMIO || defined HAVE_TERMIOS
if (timeout == scb->current_timeout)
return 0;
+ scb->current_timeout = timeout;
+
{
struct hardwire_ttystate state;
if (get_tty_state(scb, &state))
- fprintf(stderr, "get_tty_state failed: %s\n", safe_strerror(errno));
+ fprintf_unfiltered(gdb_stderr, "get_tty_state failed: %s\n", safe_strerror(errno));
#ifdef HAVE_TERMIOS
- state.termios.c_cc[VTIME] = timeout * 10;
+ if (timeout < 0)
+ {
+ /* No timeout. */
+ state.termios.c_cc[VTIME] = 0;
+ state.termios.c_cc[VMIN] = 1;
+ }
+ else
+ {
+ state.termios.c_cc[VMIN] = 0;
+ state.termios.c_cc[VTIME] = timeout * 10;
+ if (state.termios.c_cc[VTIME] != timeout * 10)
+ {
+
+ /* If c_cc is an 8-bit signed character, we can't go
+ bigger than this. If it is always unsigned, we could use
+ 25. */
+
+ scb->current_timeout = 12;
+ state.termios.c_cc[VTIME] = scb->current_timeout * 10;
+ scb->timeout_remaining = timeout - scb->current_timeout;
+ }
+ }
#endif
#ifdef HAVE_TERMIO
- state.termio.c_cc[VTIME] = timeout * 10;
+ if (timeout < 0)
+ {
+ /* No timeout. */
+ state.termio.c_cc[VTIME] = 0;
+ state.termio.c_cc[VMIN] = 1;
+ }
+ else
+ {
+ state.termio.c_cc[VMIN] = 0;
+ state.termio.c_cc[VTIME] = timeout * 10;
+ if (state.termio.c_cc[VTIME] != timeout * 10)
+ {
+ /* If c_cc is an 8-bit signed character, we can't go
+ bigger than this. If it is always unsigned, we could use
+ 25. */
+
+ scb->current_timeout = 12;
+ state.termio.c_cc[VTIME] = scb->current_timeout * 10;
+ scb->timeout_remaining = timeout - scb->current_timeout;
+ }
+ }
#endif
- scb->current_timeout = timeout;
-
if (set_tty_state (scb, &state))
- fprintf(stderr, "set_tty_state failed: %s\n", safe_strerror(errno));
+ fprintf_unfiltered(gdb_stderr, "set_tty_state failed: %s\n", safe_strerror(errno));
return 0;
}
to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
char if successful. Returns SERIAL_TIMEOUT if timeout expired, EOF if line
dropped dead, or SERIAL_ERROR for any other error (see errno in that case). */
-
static int
-hardwire_readchar(scb, timeout)
+hardwire_readchar (scb, timeout)
serial_t scb;
int timeout;
{
int status;
+#ifdef __CYGWIN__
+ int t;
+#endif
if (scb->bufcnt-- > 0)
return *scb->bufp++;
- status = wait_for(scb, timeout);
-
- if (status < 0)
- return status;
-
- scb->bufcnt = read(scb->fd, scb->buf, BUFSIZ);
-
- if (scb->bufcnt <= 0)
- if (scb->bufcnt == 0)
- return SERIAL_TIMEOUT; /* 0 chars means timeout [may need to
- distinguish between EOF & timeouts
- someday] */
- else
- return SERIAL_ERROR; /* Got an error from read */
+#ifdef __CYGWIN__
+ if (timeout > 0)
+ timeout++;
+#endif
- scb->bufcnt--;
- scb->bufp = scb->buf;
- return *scb->bufp++;
+ while (1)
+ {
+#ifdef __CYGWIN__
+ t = timeout == 0 ? 0 : 1;
+ scb->timeout_remaining = timeout < 0 ? timeout : timeout - t;
+ status = wait_for (scb, t);
+
+ /* -2 means disable timer */
+ if (ui_loop_hook)
+ ui_loop_hook (-2);
+#else
+ status = wait_for (scb, timeout);
+#endif
+ if (status < 0)
+ return status;
+
+ scb->bufcnt = read (scb->fd, scb->buf, BUFSIZ);
+
+ if (scb->bufcnt <= 0)
+ {
+ if (scb->bufcnt == 0)
+ {
+ /* Zero characters means timeout (it could also be EOF, but
+ we don't (yet at least) distinguish). */
+ if (scb->timeout_remaining > 0)
+ {
+ timeout = scb->timeout_remaining;
+ continue;
+ }
+#ifdef __CYGWIN__
+ else if (scb->timeout_remaining < 0)
+ continue;
+#endif
+ else
+ return SERIAL_TIMEOUT;
+ }
+ else if (errno == EINTR)
+ continue;
+ else
+ return SERIAL_ERROR; /* Got an error from read */
+ }
+
+ scb->bufcnt--;
+ scb->bufp = scb->buf;
+ return *scb->bufp++;
+ }
}
#ifndef B19200
{9600, B9600},
{19200, B19200},
{38400, B38400},
+#ifdef B57600
+ {57600, B57600},
+#endif
+#ifdef B115200
+ {115200, B115200},
+#endif
+#ifdef B230400
+ {230400, B230400},
+#endif
+#ifdef B460800
+ {460800, B460800},
+#endif
{-1, -1},
};
return set_tty_state (scb, &state);
}
+static int
+hardwire_setstopbits(scb, num)
+ serial_t scb;
+ int num;
+{
+ struct hardwire_ttystate state;
+ int newbit;
+
+ if (get_tty_state(scb, &state))
+ return -1;
+
+ switch (num)
+ {
+ case SERIAL_1_STOPBITS:
+ newbit = 0;
+ break;
+ case SERIAL_1_AND_A_HALF_STOPBITS:
+ case SERIAL_2_STOPBITS:
+ newbit = 1;
+ break;
+ default:
+ return 1;
+ }
+
+#ifdef HAVE_TERMIOS
+ if (!newbit)
+ state.termios.c_cflag &= ~CSTOPB;
+ else
+ state.termios.c_cflag |= CSTOPB; /* two bits */
+#endif
+
+#ifdef HAVE_TERMIO
+ if (!newbit)
+ state.termio.c_cflag &= ~CSTOPB;
+ else
+ state.termio.c_cflag |= CSTOPB; /* two bits */
+#endif
+
+#ifdef HAVE_SGTTY
+ return 0; /* sgtty doesn't support this */
+#endif
+
+ return set_tty_state (scb, &state);
+}
+
static int
hardwire_write(scb, str, len)
serial_t scb;
hardwire_print_tty_state,
hardwire_noflush_set_tty_state,
hardwire_setbaudrate,
+ hardwire_setstopbits,
+ hardwire_drain_output, /* wait for output to drain */
};
void