/* Serial interface for local (hardwired) serial ports on Un*x like systems
- Copyright 1992, 1993 Free Software Foundation, Inc.
+ Copyright 1992-1994, 1998-2000 Free Software Foundation, Inc.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "serial.h"
+#include "ser-unix.h"
+
#include <fcntl.h>
#include <sys/types.h>
+#include "terminal.h"
+#include "gdb_wait.h"
+#include <sys/socket.h>
#include <sys/time.h>
-#if !defined (HAVE_TERMIOS) && !defined (HAVE_TERMIO) && !defined (HAVE_SGTTY)
-#define HAVE_SGTTY
-#endif
+#include "gdb_string.h"
+#include "event-loop.h"
#ifdef HAVE_TERMIOS
-#include <termios.h>
-#include <unistd.h>
-#endif
+
+struct hardwire_ttystate
+ {
+ struct termios termios;
+ };
+#endif /* termios */
+
#ifdef HAVE_TERMIO
-#include <sys/termio.h>
-#endif
+
+/* It is believed that all systems which have added job control to SVR3
+ (e.g. sco) have also added termios. Even if not, trying to figure out
+ all the variations (TIOCGPGRP vs. TCGETPGRP, etc.) would be pretty
+ bewildering. So we don't attempt it. */
+
+struct hardwire_ttystate
+ {
+ struct termio termio;
+ };
+#endif /* termio */
+
#ifdef HAVE_SGTTY
-#include <sgtty.h>
-#endif
+struct hardwire_ttystate
+ {
+ struct sgttyb sgttyb;
+ struct tchars tc;
+ struct ltchars ltc;
+ /* Line discipline flags. */
+ int lmode;
+ };
+#endif /* sgtty */
+
+static int hardwire_open (serial_t scb, const char *name);
+static void hardwire_raw (serial_t scb);
+static int wait_for (serial_t scb, int timeout);
+static int hardwire_readchar (serial_t scb, int timeout);
+static int do_hardwire_readchar (serial_t scb, int timeout);
+static int generic_readchar (serial_t scb, int timeout, int (*do_readchar) (serial_t scb, int timeout));
+static int rate_to_code (int rate);
+static int hardwire_setbaudrate (serial_t scb, int rate);
+static void hardwire_close (serial_t scb);
+static int get_tty_state (serial_t scb, struct hardwire_ttystate * state);
+static int set_tty_state (serial_t scb, struct hardwire_ttystate * state);
+static serial_ttystate hardwire_get_tty_state (serial_t scb);
+static int hardwire_set_tty_state (serial_t scb, serial_ttystate state);
+static int hardwire_noflush_set_tty_state (serial_t, serial_ttystate,
+ serial_ttystate);
+static void hardwire_print_tty_state (serial_t, serial_ttystate, struct ui_file *);
+static int hardwire_drain_output (serial_t);
+static int hardwire_flush_output (serial_t);
+static int hardwire_flush_input (serial_t);
+static int hardwire_send_break (serial_t);
+static int hardwire_setstopbits (serial_t, int);
+
+static int do_unix_readchar (serial_t scb, int timeout);
+static timer_handler_func push_event;
+static handler_func fd_event;
+static void reschedule (serial_t scb);
+
+void _initialize_ser_hardwire (void);
+
+extern int (*ui_loop_hook) (int);
/* Open up a real live device for serial I/O */
static int
-hardwire_open(scb, name)
- serial_t scb;
- const char *name;
+hardwire_open (serial_t scb, const char *name)
{
scb->fd = open (name, O_RDWR);
if (scb->fd < 0)
return 0;
}
+static int
+get_tty_state (serial_t scb, struct hardwire_ttystate *state)
+{
+#ifdef HAVE_TERMIOS
+ if (tcgetattr (scb->fd, &state->termios) < 0)
+ return -1;
+
+ return 0;
+#endif
+
+#ifdef HAVE_TERMIO
+ if (ioctl (scb->fd, TCGETA, &state->termio) < 0)
+ return -1;
+ return 0;
+#endif
+
+#ifdef HAVE_SGTTY
+ if (ioctl (scb->fd, TIOCGETP, &state->sgttyb) < 0)
+ return -1;
+ if (ioctl (scb->fd, TIOCGETC, &state->tc) < 0)
+ return -1;
+ if (ioctl (scb->fd, TIOCGLTC, &state->ltc) < 0)
+ return -1;
+ if (ioctl (scb->fd, TIOCLGET, &state->lmode) < 0)
+ return -1;
+
+ return 0;
+#endif
+}
+
+static int
+set_tty_state (serial_t scb, struct hardwire_ttystate *state)
+{
+#ifdef HAVE_TERMIOS
+ if (tcsetattr (scb->fd, TCSANOW, &state->termios) < 0)
+ return -1;
+
+ return 0;
+#endif
+
+#ifdef HAVE_TERMIO
+ if (ioctl (scb->fd, TCSETA, &state->termio) < 0)
+ return -1;
+ return 0;
+#endif
+
+#ifdef HAVE_SGTTY
+ if (ioctl (scb->fd, TIOCSETN, &state->sgttyb) < 0)
+ return -1;
+ if (ioctl (scb->fd, TIOCSETC, &state->tc) < 0)
+ return -1;
+ if (ioctl (scb->fd, TIOCSLTC, &state->ltc) < 0)
+ return -1;
+ if (ioctl (scb->fd, TIOCLSET, &state->lmode) < 0)
+ return -1;
+
+ return 0;
+#endif
+}
+
+static serial_ttystate
+hardwire_get_tty_state (serial_t scb)
+{
+ struct hardwire_ttystate *state;
+
+ state = (struct hardwire_ttystate *) xmalloc (sizeof *state);
+
+ if (get_tty_state (scb, state))
+ return NULL;
+
+ return (serial_ttystate) state;
+}
+
+static int
+hardwire_set_tty_state (serial_t scb, serial_ttystate ttystate)
+{
+ struct hardwire_ttystate *state;
+
+ state = (struct hardwire_ttystate *) ttystate;
+
+ return set_tty_state (scb, state);
+}
+
+static int
+hardwire_noflush_set_tty_state (serial_t scb,
+ serial_ttystate new_ttystate,
+ serial_ttystate old_ttystate)
+{
+ struct hardwire_ttystate new_state;
+#ifdef HAVE_SGTTY
+ struct hardwire_ttystate *state = (struct hardwire_ttystate *) old_ttystate;
+#endif
+
+ new_state = *(struct hardwire_ttystate *) new_ttystate;
+
+ /* Don't change in or out of raw mode; we don't want to flush input.
+ termio and termios have no such restriction; for them flushing input
+ is separate from setting the attributes. */
+
+#ifdef HAVE_SGTTY
+ if (state->sgttyb.sg_flags & RAW)
+ new_state.sgttyb.sg_flags |= RAW;
+ else
+ new_state.sgttyb.sg_flags &= ~RAW;
+
+ /* I'm not sure whether this is necessary; the manpage just mentions
+ RAW not CBREAK. */
+ if (state->sgttyb.sg_flags & CBREAK)
+ new_state.sgttyb.sg_flags |= CBREAK;
+ else
+ new_state.sgttyb.sg_flags &= ~CBREAK;
+#endif
+
+ return set_tty_state (scb, &new_state);
+}
+
static void
-hardwire_raw(scb)
- serial_t scb;
+hardwire_print_tty_state (serial_t scb,
+ serial_ttystate ttystate,
+ struct ui_file *stream)
{
+ struct hardwire_ttystate *state = (struct hardwire_ttystate *) ttystate;
+ int i;
+
#ifdef HAVE_TERMIOS
- struct termios termios;
+ fprintf_filtered (stream, "c_iflag = 0x%x, c_oflag = 0x%x,\n",
+ (int) state->termios.c_iflag,
+ (int) state->termios.c_oflag);
+ fprintf_filtered (stream, "c_cflag = 0x%x, c_lflag = 0x%x\n",
+ (int) state->termios.c_cflag,
+ (int) state->termios.c_lflag);
+#if 0
+ /* This not in POSIX, and is not really documented by those systems
+ which have it (at least not Sun). */
+ fprintf_filtered (stream, "c_line = 0x%x.\n", state->termios.c_line);
+#endif
+ fprintf_filtered (stream, "c_cc: ");
+ for (i = 0; i < NCCS; i += 1)
+ fprintf_filtered (stream, "0x%x ", state->termios.c_cc[i]);
+ fprintf_filtered (stream, "\n");
+#endif
- if (tcgetattr(scb->fd, &termios))
- {
- fprintf(stderr, "tcgetattr failed: %s\n", safe_strerror(errno));
- }
+#ifdef HAVE_TERMIO
+ fprintf_filtered (stream, "c_iflag = 0x%x, c_oflag = 0x%x,\n",
+ state->termio.c_iflag, state->termio.c_oflag);
+ fprintf_filtered (stream, "c_cflag = 0x%x, c_lflag = 0x%x, c_line = 0x%x.\n",
+ state->termio.c_cflag, state->termio.c_lflag,
+ state->termio.c_line);
+ fprintf_filtered (stream, "c_cc: ");
+ for (i = 0; i < NCC; i += 1)
+ fprintf_filtered (stream, "0x%x ", state->termio.c_cc[i]);
+ fprintf_filtered (stream, "\n");
+#endif
- termios.c_iflag = 0;
- termios.c_oflag = 0;
- termios.c_lflag = 0;
- termios.c_cflag &= ~(CSIZE|PARENB);
- termios.c_cflag |= CS8;
- termios.c_cc[VMIN] = 0;
- termios.c_cc[VTIME] = 0;
+#ifdef HAVE_SGTTY
+ fprintf_filtered (stream, "sgttyb.sg_flags = 0x%x.\n",
+ state->sgttyb.sg_flags);
- if (tcsetattr(scb->fd, TCSANOW, &termios))
- {
- fprintf(stderr, "tcsetattr failed: %s\n", safe_strerror(errno));
- }
+ fprintf_filtered (stream, "tchars: ");
+ for (i = 0; i < (int) sizeof (struct tchars); i++)
+ fprintf_filtered (stream, "0x%x ", ((unsigned char *) &state->tc)[i]);
+ fprintf_filtered ("\n");
+
+ fprintf_filtered (stream, "ltchars: ");
+ for (i = 0; i < (int) sizeof (struct ltchars); i++)
+ fprintf_filtered (stream, "0x%x ", ((unsigned char *) &state->ltc)[i]);
+ fprintf_filtered (stream, "\n");
+
+ fprintf_filtered (stream, "lmode: 0x%x\n", state->lmode);
+#endif
+}
+
+/* Wait for the output to drain away, as opposed to flushing (discarding) it */
+
+static int
+hardwire_drain_output (serial_t scb)
+{
+#ifdef HAVE_TERMIOS
+ return tcdrain (scb->fd);
#endif
#ifdef HAVE_TERMIO
- struct termio termio;
+ return ioctl (scb->fd, TCSBRK, 1);
+#endif
- if (ioctl (scb->fd, TCGETA, &termio))
- {
- fprintf(stderr, "TCGETA failed: %s\n", safe_strerror(errno));
- }
+#ifdef HAVE_SGTTY
+ /* Get the current state and then restore it using TIOCSETP,
+ which should cause the output to drain and pending input
+ to be discarded. */
+ {
+ struct hardwire_ttystate state;
+ if (get_tty_state (scb, &state))
+ {
+ return (-1);
+ }
+ else
+ {
+ return (ioctl (scb->fd, TIOCSETP, &state.sgttyb));
+ }
+ }
+#endif
+}
- termio.c_iflag = 0;
- termio.c_oflag = 0;
- termio.c_lflag = 0;
- termio.c_cflag &= ~(CSIZE|PARENB);
- termio.c_cflag |= CS8;
- termio.c_cc[VMIN] = 0;
- termio.c_cc[VTIME] = 0;
+static int
+hardwire_flush_output (serial_t scb)
+{
+#ifdef HAVE_TERMIOS
+ return tcflush (scb->fd, TCOFLUSH);
+#endif
- if (ioctl (scb->fd, TCSETA, &termio))
- {
- fprintf(stderr, "TCSETA failed: %s\n", safe_strerror(errno));
- }
+#ifdef HAVE_TERMIO
+ return ioctl (scb->fd, TCFLSH, 1);
#endif
#ifdef HAVE_SGTTY
- struct sgttyb sgttyb;
+ /* This flushes both input and output, but we can't do better. */
+ return ioctl (scb->fd, TIOCFLUSH, 0);
+#endif
+}
+
+static int
+hardwire_flush_input (serial_t scb)
+{
+ ser_unix_flush_input (scb);
- if (ioctl (scb->fd, TIOCGETP, &sgttyb))
- fprintf(stderr, "TIOCGETP failed: %s\n", safe_strerror(errno));
+#ifdef HAVE_TERMIOS
+ return tcflush (scb->fd, TCIFLUSH);
+#endif
- sgttyb.sg_flags |= RAW | ANYP;
- sgttyb.sg_flags &= ~(CBREAK | ECHO);
+#ifdef HAVE_TERMIO
+ return ioctl (scb->fd, TCFLSH, 0);
+#endif
- if (ioctl (scb->fd, TIOCSETP, &sgttyb))
- fprintf(stderr, "TIOCSETP failed: %s\n", safe_strerror(errno));
+#ifdef HAVE_SGTTY
+ /* This flushes both input and output, but we can't do better. */
+ return ioctl (scb->fd, TIOCFLUSH, 0);
#endif
}
-/* Read a character with user-specified timeout. TIMEOUT is number of seconds
- to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
- char if successful. Returns -2 if timeout expired, EOF if line dropped
- dead, or -3 for any other error (see errno in that case). */
+static int
+hardwire_send_break (serial_t scb)
+{
+#ifdef HAVE_TERMIOS
+ return tcsendbreak (scb->fd, 0);
+#endif
+
+#ifdef HAVE_TERMIO
+ return ioctl (scb->fd, TCSBRK, 0);
+#endif
+
+#ifdef HAVE_SGTTY
+ {
+ int status;
+ struct timeval timeout;
+
+ status = ioctl (scb->fd, TIOCSBRK, 0);
+
+ /* Can't use usleep; it doesn't exist in BSD 4.2. */
+ /* Note that if this select() is interrupted by a signal it will not wait
+ the full length of time. I think that is OK. */
+ timeout.tv_sec = 0;
+ timeout.tv_usec = 250000;
+ select (0, 0, 0, 0, &timeout);
+ status = ioctl (scb->fd, TIOCCBRK, 0);
+ return status;
+ }
+#endif
+}
+
+static void
+hardwire_raw (serial_t scb)
+{
+ struct hardwire_ttystate state;
+
+ if (get_tty_state (scb, &state))
+ fprintf_unfiltered (gdb_stderr, "get_tty_state failed: %s\n", safe_strerror (errno));
+
+#ifdef HAVE_TERMIOS
+ state.termios.c_iflag = 0;
+ state.termios.c_oflag = 0;
+ state.termios.c_lflag = 0;
+ state.termios.c_cflag &= ~(CSIZE | PARENB);
+ state.termios.c_cflag |= CLOCAL | CS8;
+ state.termios.c_cc[VMIN] = 0;
+ state.termios.c_cc[VTIME] = 0;
+#endif
+
+#ifdef HAVE_TERMIO
+ state.termio.c_iflag = 0;
+ state.termio.c_oflag = 0;
+ state.termio.c_lflag = 0;
+ state.termio.c_cflag &= ~(CSIZE | PARENB);
+ state.termio.c_cflag |= CLOCAL | CS8;
+ state.termio.c_cc[VMIN] = 0;
+ state.termio.c_cc[VTIME] = 0;
+#endif
+
+#ifdef HAVE_SGTTY
+ state.sgttyb.sg_flags |= RAW | ANYP;
+ state.sgttyb.sg_flags &= ~(CBREAK | ECHO);
+#endif
+
+ scb->current_timeout = 0;
+
+ if (set_tty_state (scb, &state))
+ fprintf_unfiltered (gdb_stderr, "set_tty_state failed: %s\n", safe_strerror (errno));
+}
+
+/* Wait for input on scb, with timeout seconds. Returns 0 on success,
+ otherwise SERIAL_TIMEOUT or SERIAL_ERROR.
+
+ For termio{s}, we actually just setup VTIME if necessary, and let the
+ timeout occur in the read() in hardwire_read().
+ */
+
+/* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
+ ser_unix*() until the old TERMIOS/SGTTY/... timer code has been
+ flushed. . */
+
+/* NOTE: cagney/1999-09-30: Much of the code below is dead. The only
+ possible values of the TIMEOUT parameter are ONE and ZERO.
+ Consequently all the code that tries to handle the possability of
+ an overflowed timer is unnecessary. */
static int
-hardwire_readchar(scb, timeout)
- serial_t scb;
- int timeout;
+wait_for (serial_t scb, int timeout)
{
- int numfds;
- struct timeval tv;
- fd_set readfds;
+#ifdef HAVE_SGTTY
+ while (1)
+ {
+ struct timeval tv;
+ fd_set readfds;
+ int numfds;
- if (scb->bufcnt-- > 0)
- return *scb->bufp++;
+ /* NOTE: Some OS's can scramble the READFDS when the select()
+ call fails (ex the kernel with Red Hat 5.2). Initialize all
+ arguments before each call. */
- FD_ZERO (&readfds);
+ tv.tv_sec = timeout;
+ tv.tv_usec = 0;
- tv.tv_sec = timeout;
- tv.tv_usec = 0;
+ FD_ZERO (&readfds);
+ FD_SET (scb->fd, &readfds);
- FD_SET(scb->fd, &readfds);
+ if (timeout >= 0)
+ numfds = select (scb->fd + 1, &readfds, 0, 0, &tv);
+ else
+ numfds = select (scb->fd + 1, &readfds, 0, 0, 0);
- if (timeout >= 0)
- numfds = select(scb->fd+1, &readfds, 0, 0, &tv);
- else
- numfds = select(scb->fd+1, &readfds, 0, 0, 0);
+ if (numfds <= 0)
+ if (numfds == 0)
+ return SERIAL_TIMEOUT;
+ else if (errno == EINTR)
+ continue;
+ else
+ return SERIAL_ERROR; /* Got an error from select or poll */
+
+ return 0;
+ }
+#endif /* HAVE_SGTTY */
+
+#if defined HAVE_TERMIO || defined HAVE_TERMIOS
+ if (timeout == scb->current_timeout)
+ return 0;
+
+ scb->current_timeout = timeout;
- if (numfds <= 0)
- if (numfds == 0)
- return SERIAL_TIMEOUT;
+ {
+ struct hardwire_ttystate state;
+
+ if (get_tty_state (scb, &state))
+ fprintf_unfiltered (gdb_stderr, "get_tty_state failed: %s\n", safe_strerror (errno));
+
+#ifdef HAVE_TERMIOS
+ if (timeout < 0)
+ {
+ /* No timeout. */
+ state.termios.c_cc[VTIME] = 0;
+ state.termios.c_cc[VMIN] = 1;
+ }
else
- return SERIAL_ERROR; /* Got an error from select */
+ {
+ state.termios.c_cc[VMIN] = 0;
+ state.termios.c_cc[VTIME] = timeout * 10;
+ if (state.termios.c_cc[VTIME] != timeout * 10)
+ {
- scb->bufcnt = read(scb->fd, scb->buf, BUFSIZ);
+ /* If c_cc is an 8-bit signed character, we can't go
+ bigger than this. If it is always unsigned, we could use
+ 25. */
- if (scb->bufcnt <= 0)
- if (scb->bufcnt == 0)
- return SERIAL_EOF; /* 0 chars means end of file */
+ scb->current_timeout = 12;
+ state.termios.c_cc[VTIME] = scb->current_timeout * 10;
+ scb->timeout_remaining = timeout - scb->current_timeout;
+ }
+ }
+#endif
+
+#ifdef HAVE_TERMIO
+ if (timeout < 0)
+ {
+ /* No timeout. */
+ state.termio.c_cc[VTIME] = 0;
+ state.termio.c_cc[VMIN] = 1;
+ }
else
- return SERIAL_ERROR; /* Got an error from read */
+ {
+ state.termio.c_cc[VMIN] = 0;
+ state.termio.c_cc[VTIME] = timeout * 10;
+ if (state.termio.c_cc[VTIME] != timeout * 10)
+ {
+ /* If c_cc is an 8-bit signed character, we can't go
+ bigger than this. If it is always unsigned, we could use
+ 25. */
- scb->bufcnt--;
- scb->bufp = scb->buf;
- return *scb->bufp++;
+ scb->current_timeout = 12;
+ state.termio.c_cc[VTIME] = scb->current_timeout * 10;
+ scb->timeout_remaining = timeout - scb->current_timeout;
+ }
+ }
+#endif
+
+ if (set_tty_state (scb, &state))
+ fprintf_unfiltered (gdb_stderr, "set_tty_state failed: %s\n", safe_strerror (errno));
+
+ return 0;
+ }
+#endif /* HAVE_TERMIO || HAVE_TERMIOS */
}
+/* Read a character with user-specified timeout. TIMEOUT is number of seconds
+ to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
+ char if successful. Returns SERIAL_TIMEOUT if timeout expired, EOF if line
+ dropped dead, or SERIAL_ERROR for any other error (see errno in that case). */
+
+/* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
+ ser_unix*() until the old TERMIOS/SGTTY/... timer code has been
+ flushed. */
+
+/* NOTE: cagney/1999-09-16: This function is not identical to
+ ser_unix_readchar() as part of replacing it with ser_unix*()
+ merging will be required - this code handles the case where read()
+ times out due to no data while ser_unix_readchar() doesn't expect
+ that. */
+
+static int
+do_hardwire_readchar (serial_t scb, int timeout)
+{
+ int status, delta;
+ int detach = 0;
+
+ if (timeout > 0)
+ timeout++;
+
+ /* We have to be able to keep the GUI alive here, so we break the original
+ timeout into steps of 1 second, running the "keep the GUI alive" hook
+ each time through the loop.
+ Also, timeout = 0 means to poll, so we just set the delta to 0, so we
+ will only go through the loop once. */
+
+ delta = (timeout == 0 ? 0 : 1);
+ while (1)
+ {
+
+ /* N.B. The UI may destroy our world (for instance by calling
+ remote_stop,) in which case we want to get out of here as
+ quickly as possible. It is not safe to touch scb, since
+ someone else might have freed it. The ui_loop_hook signals that
+ we should exit by returning 1. */
+
+ if (ui_loop_hook)
+ detach = ui_loop_hook (0);
+
+ if (detach)
+ return SERIAL_TIMEOUT;
+
+ scb->timeout_remaining = (timeout < 0 ? timeout : timeout - delta);
+ status = wait_for (scb, delta);
+
+ if (status < 0)
+ return status;
+
+ status = read (scb->fd, scb->buf, BUFSIZ);
+
+ if (status <= 0)
+ {
+ if (status == 0)
+ {
+ /* Zero characters means timeout (it could also be EOF, but
+ we don't (yet at least) distinguish). */
+ if (scb->timeout_remaining > 0)
+ {
+ timeout = scb->timeout_remaining;
+ continue;
+ }
+ else if (scb->timeout_remaining < 0)
+ continue;
+ else
+ return SERIAL_TIMEOUT;
+ }
+ else if (errno == EINTR)
+ continue;
+ else
+ return SERIAL_ERROR; /* Got an error from read */
+ }
+
+ scb->bufcnt = status;
+ scb->bufcnt--;
+ scb->bufp = scb->buf;
+ return *scb->bufp++;
+ }
+}
+
+static int
+hardwire_readchar (serial_t scb, int timeout)
+{
+ return generic_readchar (scb, timeout, do_hardwire_readchar);
+}
+
+
#ifndef B19200
#define B19200 EXTA
#endif
}
baudtab[] =
{
- {50, B50},
- {75, B75},
- {110, B110},
- {134, B134},
- {150, B150},
- {200, B200},
- {300, B300},
- {600, B600},
- {1200, B1200},
- {1800, B1800},
- {2400, B2400},
- {4800, B4800},
- {9600, B9600},
- {19200, B19200},
- {38400, B38400},
- {-1, -1},
+ {
+ 50, B50
+ }
+ ,
+ {
+ 75, B75
+ }
+ ,
+ {
+ 110, B110
+ }
+ ,
+ {
+ 134, B134
+ }
+ ,
+ {
+ 150, B150
+ }
+ ,
+ {
+ 200, B200
+ }
+ ,
+ {
+ 300, B300
+ }
+ ,
+ {
+ 600, B600
+ }
+ ,
+ {
+ 1200, B1200
+ }
+ ,
+ {
+ 1800, B1800
+ }
+ ,
+ {
+ 2400, B2400
+ }
+ ,
+ {
+ 4800, B4800
+ }
+ ,
+ {
+ 9600, B9600
+ }
+ ,
+ {
+ 19200, B19200
+ }
+ ,
+ {
+ 38400, B38400
+ }
+ ,
+#ifdef B57600
+ {
+ 57600, B57600
+ }
+ ,
+#endif
+#ifdef B115200
+ {
+ 115200, B115200
+ }
+ ,
+#endif
+#ifdef B230400
+ {
+ 230400, B230400
+ }
+ ,
+#endif
+#ifdef B460800
+ {
+ 460800, B460800
+ }
+ ,
+#endif
+ {
+ -1, -1
+ }
+ ,
};
-static int
-rate_to_code(rate)
- int rate;
+static int
+rate_to_code (int rate)
{
int i;
for (i = 0; baudtab[i].rate != -1; i++)
- if (rate == baudtab[i].rate)
+ if (rate == baudtab[i].rate)
return baudtab[i].code;
return -1;
}
static int
-hardwire_setbaudrate(scb, rate)
- serial_t scb;
- int rate;
+hardwire_setbaudrate (serial_t scb, int rate)
{
-#ifdef HAVE_TERMIOS
- struct termios termios;
+ struct hardwire_ttystate state;
- if (tcgetattr (scb->fd, &termios))
+ if (get_tty_state (scb, &state))
return -1;
- cfsetospeed (&termios, rate_to_code (rate));
- cfsetispeed (&termios, rate_to_code (rate));
-
- if (tcsetattr (scb->fd, TCSANOW, &termios))
- return -1;
+#ifdef HAVE_TERMIOS
+ cfsetospeed (&state.termios, rate_to_code (rate));
+ cfsetispeed (&state.termios, rate_to_code (rate));
#endif
#ifdef HAVE_TERMIO
- struct termio termio;
-
- if (ioctl (scb->fd, TCGETA, &termio))
- return -1;
-
#ifndef CIBAUD
#define CIBAUD CBAUD
#endif
- termio.c_cflag &= ~(CBAUD | CIBAUD);
- termio.c_cflag |= rate_to_code (rate);
-
- if (ioctl (scb->fd, TCSETA, &termio))
- return -1;
+ state.termio.c_cflag &= ~(CBAUD | CIBAUD);
+ state.termio.c_cflag |= rate_to_code (rate);
#endif
#ifdef HAVE_SGTTY
- struct sgttyb sgttyb;
+ state.sgttyb.sg_ispeed = rate_to_code (rate);
+ state.sgttyb.sg_ospeed = rate_to_code (rate);
+#endif
- if (ioctl (scb->fd, TIOCGETP, &sgttyb))
- return -1;
+ return set_tty_state (scb, &state);
+}
- sgttyb.sg_ispeed = rate_to_code (rate);
- sgttyb.sg_ospeed = rate_to_code (rate);
+static int
+hardwire_setstopbits (serial_t scb, int num)
+{
+ struct hardwire_ttystate state;
+ int newbit;
- if (ioctl (scb->fd, TIOCSETP, &sgttyb))
+ if (get_tty_state (scb, &state))
return -1;
+
+ switch (num)
+ {
+ case SERIAL_1_STOPBITS:
+ newbit = 0;
+ break;
+ case SERIAL_1_AND_A_HALF_STOPBITS:
+ case SERIAL_2_STOPBITS:
+ newbit = 1;
+ break;
+ default:
+ return 1;
+ }
+
+#ifdef HAVE_TERMIOS
+ if (!newbit)
+ state.termios.c_cflag &= ~CSTOPB;
+ else
+ state.termios.c_cflag |= CSTOPB; /* two bits */
+#endif
+
+#ifdef HAVE_TERMIO
+ if (!newbit)
+ state.termio.c_cflag &= ~CSTOPB;
+ else
+ state.termio.c_cflag |= CSTOPB; /* two bits */
+#endif
+
+#ifdef HAVE_SGTTY
+ return 0; /* sgtty doesn't support this */
#endif
+
+ return set_tty_state (scb, &state);
+}
+
+static void
+hardwire_close (serial_t scb)
+{
+ if (scb->fd < 0)
+ return;
+
+ close (scb->fd);
+ scb->fd = -1;
+}
+
+\f
+/* Generic operations used by all UNIX/FD based serial interfaces. */
+
+serial_ttystate
+ser_unix_nop_get_tty_state (serial_t scb)
+{
+ /* allocate a dummy */
+ return (serial_ttystate) XMALLOC (int);
+}
+
+int
+ser_unix_nop_set_tty_state (serial_t scb, serial_ttystate ttystate)
+{
return 0;
}
+void
+ser_unix_nop_raw (serial_t scb)
+{
+ return; /* Always in raw mode */
+}
+
+/* Wait for input on scb, with timeout seconds. Returns 0 on success,
+ otherwise SERIAL_TIMEOUT or SERIAL_ERROR. */
+
+int
+ser_unix_wait_for (serial_t scb, int timeout)
+{
+ while (1)
+ {
+ int numfds;
+ struct timeval tv;
+ fd_set readfds, exceptfds;
+
+ /* NOTE: Some OS's can scramble the READFDS when the select()
+ call fails (ex the kernel with Red Hat 5.2). Initialize all
+ arguments before each call. */
+
+ tv.tv_sec = timeout;
+ tv.tv_usec = 0;
+
+ FD_ZERO (&readfds);
+ FD_ZERO (&exceptfds);
+ FD_SET (scb->fd, &readfds);
+ FD_SET (scb->fd, &exceptfds);
+
+ if (timeout >= 0)
+ numfds = select (scb->fd + 1, &readfds, 0, &exceptfds, &tv);
+ else
+ numfds = select (scb->fd + 1, &readfds, 0, &exceptfds, 0);
+
+ if (numfds <= 0)
+ {
+ if (numfds == 0)
+ return SERIAL_TIMEOUT;
+ else if (errno == EINTR)
+ continue;
+ else
+ return SERIAL_ERROR; /* Got an error from select or poll */
+ }
+
+ return 0;
+ }
+}
+
+/* Read a character with user-specified timeout. TIMEOUT is number of seconds
+ to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
+ char if successful. Returns -2 if timeout expired, EOF if line dropped
+ dead, or -3 for any other error (see errno in that case). */
+
+static int
+do_unix_readchar (serial_t scb, int timeout)
+{
+ int status;
+ int delta;
+
+ /* We have to be able to keep the GUI alive here, so we break the original
+ timeout into steps of 1 second, running the "keep the GUI alive" hook
+ each time through the loop.
+
+ Also, timeout = 0 means to poll, so we just set the delta to 0, so we
+ will only go through the loop once. */
+
+ delta = (timeout == 0 ? 0 : 1);
+ while (1)
+ {
+
+ /* N.B. The UI may destroy our world (for instance by calling
+ remote_stop,) in which case we want to get out of here as
+ quickly as possible. It is not safe to touch scb, since
+ someone else might have freed it. The ui_loop_hook signals that
+ we should exit by returning 1. */
+
+ if (ui_loop_hook)
+ {
+ if (ui_loop_hook (0))
+ return SERIAL_TIMEOUT;
+ }
+
+ status = ser_unix_wait_for (scb, delta);
+ if (timeout > 0)
+ timeout -= delta;
+
+ /* If we got a character or an error back from wait_for, then we can
+ break from the loop before the timeout is completed. */
+
+ if (status != SERIAL_TIMEOUT)
+ {
+ break;
+ }
+
+ /* If we have exhausted the original timeout, then generate
+ a SERIAL_TIMEOUT, and pass it out of the loop. */
+
+ else if (timeout == 0)
+ {
+ status = SERIAL_TIMEOUT;
+ break;
+ }
+ }
+
+ if (status < 0)
+ return status;
+
+ while (1)
+ {
+ status = read (scb->fd, scb->buf, BUFSIZ);
+ if (status != -1 || errno != EINTR)
+ break;
+ }
+
+ if (status <= 0)
+ {
+ if (status == 0)
+ return SERIAL_TIMEOUT; /* 0 chars means timeout [may need to
+ distinguish between EOF & timeouts
+ someday] */
+ else
+ return SERIAL_ERROR; /* Got an error from read */
+ }
+
+ scb->bufcnt = status;
+ scb->bufcnt--;
+ scb->bufp = scb->buf;
+ return *scb->bufp++;
+}
+
+/* Perform operations common to both old and new readchar. */
+
+/* Return the next character from the input FIFO. If the FIFO is
+ empty, call the SERIAL specific routine to try and read in more
+ characters.
+
+ Initially data from the input FIFO is returned (fd_event()
+ pre-reads the input into that FIFO. Once that has been emptied,
+ further data is obtained by polling the input FD using the device
+ specific readchar() function. Note: reschedule() is called after
+ every read. This is because there is no guarentee that the lower
+ level fd_event() poll_event() code (which also calls reschedule())
+ will be called. */
+
static int
-hardwire_write(scb, str, len)
- serial_t scb;
- const char *str;
- int len;
+generic_readchar (serial_t scb, int timeout,
+ int (do_readchar) (serial_t scb, int timeout))
+{
+ int ch;
+ if (scb->bufcnt > 0)
+ {
+ ch = *scb->bufp;
+ scb->bufcnt--;
+ scb->bufp++;
+ }
+ else if (scb->bufcnt < 0)
+ {
+ /* Some errors/eof are are sticky. */
+ ch = scb->bufcnt;
+ }
+ else
+ {
+ ch = do_readchar (scb, timeout);
+ if (ch < 0)
+ {
+ switch ((enum serial_rc) ch)
+ {
+ case SERIAL_EOF:
+ case SERIAL_ERROR:
+ /* Make the error/eof stick. */
+ scb->bufcnt = ch;
+ break;
+ case SERIAL_TIMEOUT:
+ scb->bufcnt = 0;
+ break;
+ }
+ }
+ }
+ reschedule (scb);
+ return ch;
+}
+
+int
+ser_unix_readchar (serial_t scb, int timeout)
+{
+ return generic_readchar (scb, timeout, do_unix_readchar);
+}
+
+int
+ser_unix_nop_noflush_set_tty_state (serial_t scb,
+ serial_ttystate new_ttystate,
+ serial_ttystate old_ttystate)
+{
+ return 0;
+}
+
+void
+ser_unix_nop_print_tty_state (serial_t scb,
+ serial_ttystate ttystate,
+ struct ui_file *stream)
+{
+ /* Nothing to print. */
+ return;
+}
+
+int
+ser_unix_nop_setbaudrate (serial_t scb, int rate)
+{
+ return 0; /* Never fails! */
+}
+
+int
+ser_unix_nop_setstopbits (serial_t scb, int num)
+{
+ return 0; /* Never fails! */
+}
+
+int
+ser_unix_write (serial_t scb, const char *str, int len)
{
int cc;
while (len > 0)
{
- cc = write(scb->fd, str, len);
+ cc = write (scb->fd, str, len);
if (cc < 0)
return 1;
return 0;
}
+int
+ser_unix_nop_flush_output (serial_t scb)
+{
+ return 0;
+}
+
+int
+ser_unix_flush_input (serial_t scb)
+{
+ if (scb->bufcnt >= 0)
+ {
+ scb->bufcnt = 0;
+ scb->bufp = scb->buf;
+ return 0;
+ }
+ else
+ return SERIAL_ERROR;
+}
+
+int
+ser_unix_nop_send_break (serial_t scb)
+{
+ return 0;
+}
+
+int
+ser_unix_nop_drain_output (serial_t scb)
+{
+ return 0;
+}
+
+
+\f
+/* Event handling for ASYNC serial code.
+
+ At any time the SERIAL device either: has an empty FIFO and is
+ waiting on a FD event; or has a non-empty FIFO/error condition and
+ is constantly scheduling timer events.
+
+ ASYNC only stops pestering its client when it is de-async'ed or it
+ is told to go away. */
+
+/* Value of scb->async_state: */
+enum {
+ /* >= 0 (TIMER_SCHEDULED) */
+ /* The ID of the currently scheduled timer event. This state is
+ rarely encountered. Timer events are one-off so as soon as the
+ event is delivered the state is shanged to NOTHING_SCHEDULED. */
+ FD_SCHEDULED = -1,
+ /* The fd_event() handler is scheduled. It is called when ever the
+ file descriptor becomes ready. */
+ NOTHING_SCHEDULED = -2
+ /* Either no task is scheduled (just going into ASYNC mode) or a
+ timer event has just gone off and the current state has been
+ forced into nothing scheduled. */
+};
+
+/* Identify and schedule the next ASYNC task based on scb->async_state
+ and scb->buf* (the input FIFO). A state machine is used to avoid
+ the need to make redundant calls into the event-loop - the next
+ scheduled task is only changed when needed. */
+
static void
-hardwire_restore(scb)
- serial_t scb;
+reschedule (serial_t scb)
{
+ if (SERIAL_IS_ASYNC_P (scb))
+ {
+ int next_state;
+ switch (scb->async_state)
+ {
+ case FD_SCHEDULED:
+ if (scb->bufcnt == 0)
+ next_state = FD_SCHEDULED;
+ else
+ {
+ delete_file_handler (scb->fd);
+ next_state = create_timer (0, push_event, scb);
+ }
+ break;
+ case NOTHING_SCHEDULED:
+ if (scb->bufcnt == 0)
+ {
+ add_file_handler (scb->fd, fd_event, scb);
+ next_state = FD_SCHEDULED;
+ }
+ else
+ {
+ next_state = create_timer (0, push_event, scb);
+ }
+ break;
+ default: /* TIMER SCHEDULED */
+ if (scb->bufcnt == 0)
+ {
+ delete_timer (scb->async_state);
+ add_file_handler (scb->fd, fd_event, scb);
+ next_state = FD_SCHEDULED;
+ }
+ else
+ next_state = scb->async_state;
+ break;
+ }
+ if (SERIAL_DEBUG_P (scb))
+ {
+ switch (next_state)
+ {
+ case FD_SCHEDULED:
+ if (scb->async_state != FD_SCHEDULED)
+ fprintf_unfiltered (gdb_stdlog, "[fd%d->fd-scheduled]\n",
+ scb->fd);
+ break;
+ default: /* TIMER SCHEDULED */
+ if (scb->async_state == FD_SCHEDULED)
+ fprintf_unfiltered (gdb_stdlog, "[fd%d->timer-scheduled]\n",
+ scb->fd);
+ break;
+ }
+ }
+ scb->async_state = next_state;
+ }
}
+/* FD_EVENT: This is scheduled when the input FIFO is empty (and there
+ is no pending error). As soon as data arrives, it is read into the
+ input FIFO and the client notified. The client should then drain
+ the FIFO using readchar(). If the FIFO isn't immediatly emptied,
+ push_event() is used to nag the client until it is. */
+
static void
-hardwire_close(scb)
- serial_t scb;
+fd_event (int error, void *context)
{
- if (scb->fd < 0)
- return;
+ serial_t scb = context;
+ if (error != 0)
+ {
+ scb->bufcnt = SERIAL_ERROR;
+ }
+ else if (scb->bufcnt == 0)
+ {
+ /* Prime the input FIFO. The readchar() function is used to
+ pull characters out of the buffer. See also
+ generic_readchar(). */
+ int nr;
+ do
+ {
+ nr = read (scb->fd, scb->buf, BUFSIZ);
+ }
+ while (nr == -1 && errno == EINTR);
+ if (nr == 0)
+ {
+ scb->bufcnt = SERIAL_EOF;
+ }
+ else if (nr > 0)
+ {
+ scb->bufcnt = nr;
+ scb->bufp = scb->buf;
+ }
+ else
+ {
+ scb->bufcnt = SERIAL_ERROR;
+ }
+ }
+ scb->async_handler (scb, scb->async_context);
+ reschedule (scb);
+}
- close(scb->fd);
- scb->fd = -1;
+/* PUSH_EVENT: The input FIFO is non-empty (or there is a pending
+ error). Nag the client until all the data has been read. In the
+ case of errors, the client will need to close or de-async the
+ device before naging stops. */
+
+static void
+push_event (void *context)
+{
+ serial_t scb = context;
+ scb->async_state = NOTHING_SCHEDULED; /* Timers are one-off */
+ scb->async_handler (scb, scb->async_context);
+ /* re-schedule */
+ reschedule (scb);
}
-static struct serial_ops hardwire_ops =
+/* Put the SERIAL device into/out-of ASYNC mode. */
+
+void
+ser_unix_async (serial_t scb,
+ int async_p)
{
- "hardwire",
- 0,
- hardwire_open,
- hardwire_close,
- hardwire_readchar,
- hardwire_write,
- hardwire_raw,
- hardwire_restore,
- hardwire_setbaudrate
-};
+ if (async_p)
+ {
+ /* Force a re-schedule. */
+ scb->async_state = NOTHING_SCHEDULED;
+ if (SERIAL_DEBUG_P (scb))
+ fprintf_unfiltered (gdb_stdlog, "[fd%d->asynchronous]\n",
+ scb->fd);
+ reschedule (scb);
+ }
+ else
+ {
+ if (SERIAL_DEBUG_P (scb))
+ fprintf_unfiltered (gdb_stdlog, "[fd%d->synchronous]\n",
+ scb->fd);
+ /* De-schedule whatever tasks are currently scheduled. */
+ switch (scb->async_state)
+ {
+ case FD_SCHEDULED:
+ delete_file_handler (scb->fd);
+ break;
+ NOTHING_SCHEDULED:
+ break;
+ default: /* TIMER SCHEDULED */
+ delete_timer (scb->async_state);
+ break;
+ }
+ }
+}
-_initialize_ser_hardwire ()
+void
+_initialize_ser_hardwire (void)
{
- serial_add_interface (&hardwire_ops);
+ struct serial_ops *ops = XMALLOC (struct serial_ops);
+ memset (ops, sizeof (struct serial_ops), 0);
+ ops->name = "hardwire";
+ ops->next = 0;
+ ops->open = hardwire_open;
+ ops->close = hardwire_close;
+ /* FIXME: Don't replace this with the equivalent ser_unix*() until
+ the old TERMIOS/SGTTY/... timer code has been flushed. cagney
+ 1999-09-16. */
+ ops->readchar = hardwire_readchar;
+ ops->write = ser_unix_write;
+ ops->flush_output = hardwire_flush_output;
+ ops->flush_input = hardwire_flush_input;
+ ops->send_break = hardwire_send_break;
+ ops->go_raw = hardwire_raw;
+ ops->get_tty_state = hardwire_get_tty_state;
+ ops->set_tty_state = hardwire_set_tty_state;
+ ops->print_tty_state = hardwire_print_tty_state;
+ ops->noflush_set_tty_state = hardwire_noflush_set_tty_state;
+ ops->setbaudrate = hardwire_setbaudrate;
+ ops->setstopbits = hardwire_setstopbits;
+ ops->drain_output = hardwire_drain_output;
+ ops->async = ser_unix_async;
+ serial_add_interface (ops);
}