/* Generic serial interface routines
- Copyright 1992, 1993, 1996 Free Software Foundation, Inc.
+ Copyright 1992, 1993, 1996, 1997 Free Software Foundation, Inc.
This file is part of GDB.
/* Non-NULL gives filename which contains a recording of the remote session,
suitable for playback by gdbserver. */
-char *serial_logfile = NULL;
-FILE *serial_logfp = NULL;
+static char *serial_logfile = NULL;
+static FILE *serial_logfp = NULL;
+
+static struct serial_ops *serial_interface_lookup PARAMS ((char *));
+static void serial_logchar PARAMS ((int chtype, int ch, int timeout));
+static char logbase_hex[] = "hex";
+static char logbase_octal[] = "octal";
+static char logbase_ascii[] = "ascii";
+static char *logbase_enums[] = {logbase_hex, logbase_octal, logbase_ascii, NULL};
+static char *serial_logbase = logbase_ascii;
\f
-static int serial_reading = 0;
-static int serial_writing = 0;
+static int serial_current_type = 0;
-void
-serial_log_command (cmd)
- const char *cmd;
-{
- if (serial_reading || serial_writing)
- {
- fputc_unfiltered ('\n', serial_logfp);
- serial_reading = 0;
- serial_writing = 0;
- }
- fprintf_unfiltered (serial_logfp, "c %s\n", cmd);
- /* Make sure that the log file is as up-to-date as possible,
- in case we are getting ready to dump core or something. */
- fflush (serial_logfp);
-}
+/* Log char CH of type CHTYPE, with TIMEOUT */
+
+/* Define bogus char to represent a BREAK. Should be careful to choose a value
+ that can't be confused with a normal char, or an error code. */
+#define SERIAL_BREAK 1235
static void
-serial_logchar (ch)
+serial_logchar (chtype, ch, timeout)
+ int chtype;
int ch;
+ int timeout;
{
+ if (chtype != serial_current_type)
+ {
+ fprintf_unfiltered (serial_logfp, "\n%c ", chtype);
+ serial_current_type = chtype;
+ }
+
+ if (serial_logbase != logbase_ascii)
+ fputc_unfiltered (' ', serial_logfp);
+
switch (ch)
{
- case '\\': fputs_unfiltered ("\\\\", serial_logfp); break;
- case '\b': fputs_unfiltered ("\\b", serial_logfp); break;
- case '\f': fputs_unfiltered ("\\f", serial_logfp); break;
- case '\n': fputs_unfiltered ("\\n", serial_logfp); break;
- case '\r': fputs_unfiltered ("\\r", serial_logfp); break;
- case '\t': fputs_unfiltered ("\\t", serial_logfp); break;
- case '\v': fputs_unfiltered ("\\v", serial_logfp); break;
- default: fprintf_unfiltered (serial_logfp, isprint (ch) ? "%c" : "\\x%02x", ch & 0xFF); break;
+ case SERIAL_TIMEOUT:
+ fprintf_unfiltered (serial_logfp, "<Timeout: %d seconds>", timeout);
+ return;
+ case SERIAL_ERROR:
+ fprintf_unfiltered (serial_logfp, "<Error: %s>", safe_strerror (errno));
+ return;
+ case SERIAL_EOF:
+ fputs_unfiltered ("<Eof>", serial_logfp);
+ return;
+ case SERIAL_BREAK:
+ fputs_unfiltered ("<Break>", serial_logfp);
+ return;
+ default:
+ if (serial_logbase == logbase_hex)
+ fprintf_unfiltered (serial_logfp, "%02x", ch & 0xff);
+ else if (serial_logbase == logbase_octal)
+ fprintf_unfiltered (serial_logfp, "%03o", ch & 0xff);
+ else
+ switch (ch)
+ {
+ case '\\': fputs_unfiltered ("\\\\", serial_logfp); break;
+ case '\b': fputs_unfiltered ("\\b", serial_logfp); break;
+ case '\f': fputs_unfiltered ("\\f", serial_logfp); break;
+ case '\n': fputs_unfiltered ("\\n", serial_logfp); break;
+ case '\r': fputs_unfiltered ("\\r", serial_logfp); break;
+ case '\t': fputs_unfiltered ("\\t", serial_logfp); break;
+ case '\v': fputs_unfiltered ("\\v", serial_logfp); break;
+ default: fprintf_unfiltered (serial_logfp, isprint (ch) ? "%c" : "\\x%02x", ch & 0xFF); break;
+ }
}
}
+void
+serial_log_command (cmd)
+ const char *cmd;
+{
+ if (!serial_logfp)
+ return;
+
+ serial_current_type = 'c';
+
+ fputs_unfiltered ("\nc ", serial_logfp);
+ fputs_unfiltered (cmd, serial_logfp);
+
+ /* Make sure that the log file is as up-to-date as possible,
+ in case we are getting ready to dump core or something. */
+ gdb_flush (serial_logfp);
+}
+
int
serial_write (scb, str, len)
serial_t scb;
const char *str;
int len;
{
- int count;
-
if (serial_logfp != NULL)
{
- if (serial_reading)
- {
- fputc_unfiltered ('\n', serial_logfp);
- serial_reading = 0;
- }
- if (!serial_writing)
- {
- serial_logchar ('w');
- serial_logchar (' ');
- serial_writing = 1;
- }
+ int count;
+
for (count = 0; count < len; count++)
- {
- serial_logchar (str[count]);
- }
+ serial_logchar ('w', str[count] & 0xff, 0);
+
/* Make sure that the log file is as up-to-date as possible,
in case we are getting ready to dump core or something. */
- fflush (serial_logfp);
+ gdb_flush (serial_logfp);
}
+
return (scb -> ops -> write (scb, str, len));
}
ch = scb -> ops -> readchar (scb, timeout);
if (serial_logfp != NULL)
{
- if (serial_writing)
- {
- fputc_unfiltered ('\n', serial_logfp);
- serial_writing = 0;
- }
- if (!serial_reading)
- {
- serial_logchar ('r');
- serial_logchar (' ');
- serial_reading = 1;
- }
- serial_logchar (ch);
+ serial_logchar ('r', ch, timeout);
+
/* Make sure that the log file is as up-to-date as possible,
in case we are getting ready to dump core or something. */
- fflush (serial_logfp);
+ gdb_flush (serial_logfp);
}
+
return (ch);
}
+int
+serial_send_break (scb)
+ serial_t scb;
+{
+ if (serial_logfp != NULL)
+ serial_logchar ('w', SERIAL_BREAK, 0);
+
+ return (scb -> ops -> send_break (scb));
+}
+
static struct serial_ops *
serial_interface_lookup (name)
char *name;
return scb;
}
- if (strcmp (name, "pc") == 0)
+ if (strcmp (name, "ocd") == 0)
+ ops = serial_interface_lookup ("ocd");
+ else if (strcmp (name, "pc") == 0)
ops = serial_interface_lookup ("pc");
else if (strchr (name, ':'))
ops = serial_interface_lookup ("tcp");
if (serial_logfile != NULL)
{
- serial_logfp = fopen (serial_logfile, "w");
+ serial_logfp = gdb_fopen (serial_logfile, "w");
if (serial_logfp == NULL)
- {
- perror_with_name (serial_logfile);
- }
+ perror_with_name (serial_logfile);
}
return scb;
}
void
-serial_close(scb, really_close)
+serial_close (scb, really_close)
serial_t scb;
int really_close;
{
if (serial_logfp)
{
- if (serial_reading || serial_writing)
- {
- fputc_unfiltered ('\n', serial_logfp);
- serial_reading = 0;
- serial_writing = 0;
- }
- fclose (serial_logfp);
+ fputs_unfiltered ("\nEnd of log\n", serial_logfp);
+ serial_current_type = 0;
+
+ fclose (serial_logfp); /* XXX - What if serial_logfp == stdout or stderr? */
serial_logfp = NULL;
}
by gdbserver.", &setlist),
&showlist);
+ add_show_from_set (add_set_enum_cmd ("remotelogbase", no_class,
+ logbase_enums,
+ (char *)&serial_logbase,
+ "Set numerical base for remote session logging",
+ &setlist),
+ &showlist);
}