/* Generic serial interface routines
- Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
- Free Software Foundation, Inc.
+ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+ 2001, 2002, 2004, 2005, 2006 Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include <ctype.h>
static const char *logbase_enums[] =
{logbase_hex, logbase_octal, logbase_ascii, NULL};
static const char *serial_logbase = logbase_ascii;
-
-#undef XMALLOC
-#define XMALLOC(TYPE) ((TYPE*) xmalloc (sizeof (TYPE)))
\f
static int serial_current_type = 0;
return scb;
}
- if (strcmp (name, "ocd") == 0)
- ops = serial_interface_lookup ("ocd");
- else if (strcmp (name, "pc") == 0)
+ if (strcmp (name, "pc") == 0)
ops = serial_interface_lookup ("pc");
else if (strchr (name, ':'))
ops = serial_interface_lookup ("tcp");
return scb;
}
+/* Return the open serial device for FD, if found, or NULL if FD
+ is not already opened. */
+
+struct serial *
+serial_for_fd (int fd)
+{
+ struct serial *scb;
+ struct serial_ops *ops;
+
+ for (scb = scb_base; scb; scb = scb->next)
+ if (scb->fd == fd)
+ return scb;
+
+ return NULL;
+}
+
struct serial *
serial_fdopen (const int fd)
{
return scb;
}
- ops = serial_interface_lookup ("hardwire");
+ ops = serial_interface_lookup ("terminal");
+ if (!ops)
+ ops = serial_interface_lookup ("hardwire");
if (!ops)
return NULL;
- scb = XMALLOC (struct serial);
+ scb = XCALLOC (1, struct serial);
scb->ops = ops;
/* FIXME: cagney/1999-10-11: Don't enable this check until the ASYNC
code is finished. */
- if (0 && SERIAL_IS_ASYNC_P (scb) && timeout < 0)
+ if (0 && serial_is_async_p (scb) && timeout < 0)
internal_error (__FILE__, __LINE__,
- "serial_readchar: blocking read in async mode");
+ _("serial_readchar: blocking read in async mode"));
ch = scb->ops->readchar (scb, timeout);
if (serial_logfp != NULL)
in case we are getting ready to dump core or something. */
gdb_flush (serial_logfp);
}
- if (SERIAL_DEBUG_P (scb))
+ if (serial_debug_p (scb))
{
fprintf_unfiltered (gdb_stdlog, "[");
serial_logchar (gdb_stdlog, 'r', ch, timeout);
char *buf;
va_start (args, format);
- xvasprintf (&buf, format, args);
- SERIAL_WRITE (desc, buf, strlen (buf));
+ buf = xstrvprintf (format, args);
+ serial_write (desc, buf, strlen (buf));
xfree (buf);
va_end (args);
if (scb->fd < 0)
{
internal_error (__FILE__, __LINE__,
- "serial: FD not valid");
+ _("serial: FD not valid"));
}
return scb->fd; /* sigh */
}
return scb->debug_p || global_serial_debug_p;
}
+#ifdef USE_WIN32API
+void
+serial_wait_handle (struct serial *scb, HANDLE *read, HANDLE *except)
+{
+ if (scb->ops->wait_handle)
+ scb->ops->wait_handle (scb, read, except);
+ else
+ {
+ *read = (HANDLE) _get_osfhandle (scb->fd);
+ *except = NULL;
+ }
+}
+#endif
#if 0
/* The connect command is #if 0 because I hadn't thought of an elegant
cleanup_tty (serial_ttystate ttystate)
{
printf_unfiltered ("\r\n[Exiting connect mode]\r\n");
- SERIAL_SET_TTY_STATE (tty_desc, ttystate);
+ serial_set_tty_state (tty_desc, ttystate);
xfree (ttystate);
- SERIAL_CLOSE (tty_desc);
+ serial_close (tty_desc);
}
static void
printf_unfiltered ("[Entering connect mode. Use ~. or ~^D to escape]\n");
- tty_desc = SERIAL_FDOPEN (0);
+ tty_desc = serial_fdopen (0);
port_desc = last_serial_opened;
- ttystate = SERIAL_GET_TTY_STATE (tty_desc);
+ ttystate = serial_get_tty_state (tty_desc);
- SERIAL_RAW (tty_desc);
- SERIAL_RAW (port_desc);
+ serial_raw (tty_desc);
+ serial_raw (port_desc);
make_cleanup (cleanup_tty, ttystate);
{
int mask;
- mask = SERIAL_WAIT_2 (tty_desc, port_desc, -1);
+ mask = serial_wait_2 (tty_desc, port_desc, -1);
if (mask & 2)
{ /* tty input */
while (1)
{
- c = SERIAL_READCHAR (tty_desc, 0);
+ c = serial_readchar (tty_desc, 0);
if (c == SERIAL_TIMEOUT)
break;
if (c < 0)
- perror_with_name ("connect");
+ perror_with_name (_("connect"));
cx = c;
- SERIAL_WRITE (port_desc, &cx, 1);
+ serial_write (port_desc, &cx, 1);
switch (cur_esc)
{
while (1)
{
- c = SERIAL_READCHAR (port_desc, 0);
+ c = serial_readchar (port_desc, 0);
if (c == SERIAL_TIMEOUT)
break;
if (c < 0)
- perror_with_name ("connect");
+ perror_with_name (_("connect"));
cx = c;
- SERIAL_WRITE (tty_desc, &cx, 1);
+ serial_write (tty_desc, &cx, 1);
}
}
}
}
#endif /* 0 */
+/* Serial set/show framework. */
+
+static struct cmd_list_element *serial_set_cmdlist;
+static struct cmd_list_element *serial_show_cmdlist;
+
+static void
+serial_set_cmd (char *args, int from_tty)
+{
+ printf_unfiltered ("\"set serial\" must be followed by the name of a command.\n");
+ help_list (serial_set_cmdlist, "set serial ", -1, gdb_stdout);
+}
+
+static void
+serial_show_cmd (char *args, int from_tty)
+{
+ cmd_show_list (serial_show_cmdlist, from_tty, "");
+}
+
+
void
_initialize_serial (void)
{
#if 0
- add_com ("connect", class_obscure, connect_command,
- "Connect the terminal directly up to the command monitor.\n\
-Use <CR>~. or <CR>~^D to break out.");
+ add_com ("connect", class_obscure, connect_command, _("\
+Connect the terminal directly up to the command monitor.\n\
+Use <CR>~. or <CR>~^D to break out."));
#endif /* 0 */
- add_show_from_set
- (add_set_cmd ("remotelogfile", no_class,
- var_filename, (char *) &serial_logfile,
- "Set filename for remote session recording.\n\
+ add_prefix_cmd ("serial", class_maintenance, serial_set_cmd, _("\
+Set default serial/parallel port configuration."),
+ &serial_set_cmdlist, "set serial ",
+ 0/*allow-unknown*/,
+ &setlist);
+
+ add_prefix_cmd ("serial", class_maintenance, serial_show_cmd, _("\
+Show default serial/parallel port configuration."),
+ &serial_show_cmdlist, "show serial ",
+ 0/*allow-unknown*/,
+ &showlist);
+
+ add_setshow_filename_cmd ("remotelogfile", no_class, &serial_logfile, _("\
+Set filename for remote session recording."), _("\
+Show filename for remote session recording."), _("\
This file is used to record the remote session for future playback\n\
-by gdbserver.",
- &setlist),
- &showlist);
-
- add_show_from_set
- (add_set_enum_cmd ("remotelogbase", no_class,
- logbase_enums, &serial_logbase,
- "Set numerical base for remote session logging",
- &setlist),
- &showlist);
-
- add_show_from_set (add_set_cmd ("serial",
- class_maintenance,
- var_zinteger,
- (char *)&global_serial_debug_p,
- "Set serial debugging.\n\
-When non-zero, serial port debugging is enabled.", &setdebuglist),
- &showdebuglist);
+by gdbserver."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_enum_cmd ("remotelogbase", no_class, logbase_enums,
+ &serial_logbase, _("\
+Set numerical base for remote session logging"), _("\
+Show numerical base for remote session logging"), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("serial", class_maintenance,
+ &global_serial_debug_p, _("\
+Set serial debugging."), _("\
+Show serial debugging."), _("\
+When non-zero, serial port debugging is enabled."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setdebuglist, &showdebuglist);
}