/* Generic serial interface routines
- Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
- 2001, 2002 Free Software Foundation, Inc.
+ Copyright (C) 1992-2015 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include <ctype.h>
#include "serial.h"
-#include "gdb_string.h"
#include "gdbcmd.h"
+#include "cli/cli-utils.h"
extern void _initialize_serial (void);
-/* Is serial being debugged? */
+/* Is serial being debugged? */
-static int global_serial_debug_p;
+static unsigned int global_serial_debug_p;
-/* Linked list of serial I/O handlers */
+typedef const struct serial_ops *serial_ops_p;
+DEF_VEC_P (serial_ops_p);
-static struct serial_ops *serial_ops_list = NULL;
+/* Serial I/O handlers. */
-/* This is the last serial stream opened. Used by connect command. */
+VEC (serial_ops_p) *serial_ops_list = NULL;
-static struct serial *last_serial_opened = NULL;
-
-/* Pointer to list of scb's. */
+/* Pointer to list of scb's. */
static struct serial *scb_base;
/* Non-NULL gives filename which contains a recording of the remote session,
- suitable for playback by gdbserver. */
+ suitable for playback by gdbserver. */
static char *serial_logfile = NULL;
static struct ui_file *serial_logfp = NULL;
-static struct serial_ops *serial_interface_lookup (char *);
-static void serial_logchar (struct ui_file *stream, int ch_type, int ch, int timeout);
+static const struct serial_ops *serial_interface_lookup (const char *);
+static void serial_logchar (struct ui_file *stream,
+ int ch_type, int ch, int timeout);
static const char logbase_hex[] = "hex";
static const char logbase_octal[] = "octal";
static const char logbase_ascii[] = "ascii";
-static const char *logbase_enums[] =
+static const char *const logbase_enums[] =
{logbase_hex, logbase_octal, logbase_ascii, NULL};
static const char *serial_logbase = logbase_ascii;
\f
static int serial_current_type = 0;
-/* Log char CH of type CHTYPE, with TIMEOUT */
+/* Log char CH of type CHTYPE, with TIMEOUT. */
/* Define bogus char to represent a BREAK. Should be careful to choose a value
that can't be confused with a normal char, or an error code. */
fputs_unfiltered ("\\v", stream);
break;
default:
- fprintf_unfiltered (stream, isprint (ch) ? "%c" : "\\x%02x", ch & 0xFF);
+ fprintf_unfiltered (stream,
+ isprint (ch) ? "%c" : "\\x%02x", ch & 0xFF);
break;
}
}
}
void
-serial_log_command (const char *cmd)
+serial_log_command (struct target_ops *self, const char *cmd)
{
if (!serial_logfp)
return;
fputs_unfiltered (cmd, serial_logfp);
/* Make sure that the log file is as up-to-date as possible,
- in case we are getting ready to dump core or something. */
+ in case we are getting ready to dump core or something. */
gdb_flush (serial_logfp);
}
\f
-static struct serial_ops *
-serial_interface_lookup (char *name)
+static const struct serial_ops *
+serial_interface_lookup (const char *name)
{
- struct serial_ops *ops;
+ const struct serial_ops *ops;
+ int i;
- for (ops = serial_ops_list; ops; ops = ops->next)
+ for (i = 0; VEC_iterate (serial_ops_p, serial_ops_list, i, ops); ++i)
if (strcmp (name, ops->name) == 0)
return ops;
}
void
-serial_add_interface (struct serial_ops *optable)
+serial_add_interface (const struct serial_ops *optable)
{
- optable->next = serial_ops_list;
- serial_ops_list = optable;
+ VEC_safe_push (serial_ops_p, serial_ops_list, optable);
}
-/* Open up a device or a network socket, depending upon the syntax of NAME. */
+/* Return the open serial device for FD, if found, or NULL if FD is
+ not already opened. */
struct serial *
-serial_open (const char *name)
+serial_for_fd (int fd)
{
struct serial *scb;
- struct serial_ops *ops;
- const char *open_name = name;
for (scb = scb_base; scb; scb = scb->next)
- if (scb->name && strcmp (scb->name, name) == 0)
- {
- scb->refcnt++;
- return scb;
- }
+ if (scb->fd == fd)
+ return scb;
+
+ return NULL;
+}
+
+/* Open up a device or a network socket, depending upon the syntax of NAME. */
+
+struct serial *
+serial_open (const char *name)
+{
+ struct serial *scb;
+ const struct serial_ops *ops;
+ const char *open_name = name;
if (strcmp (name, "pc") == 0)
ops = serial_interface_lookup ("pc");
- else if (strchr (name, ':'))
- ops = serial_interface_lookup ("tcp");
- else if (strncmp (name, "lpt", 3) == 0)
+ else if (startswith (name, "lpt"))
ops = serial_interface_lookup ("parallel");
- else if (strncmp (name, "|", 1) == 0)
+ else if (startswith (name, "|"))
{
ops = serial_interface_lookup ("pipe");
- open_name = name + 1; /* discard ``|'' */
+ /* Discard ``|'' and any space before the command itself. */
+ ++open_name;
+ open_name = skip_spaces_const (open_name);
}
+ /* Check for a colon, suggesting an IP address/port pair.
+ Do this *after* checking for all the interesting prefixes. We
+ don't want to constrain the syntax of what can follow them. */
+ else if (strchr (name, ':'))
+ ops = serial_interface_lookup ("tcp");
else
ops = serial_interface_lookup ("hardwire");
if (!ops)
return NULL;
- scb = XMALLOC (struct serial);
+ scb = XNEW (struct serial);
scb->ops = ops;
scb->bufcnt = 0;
scb->bufp = scb->buf;
+ scb->error_fd = -1;
+ scb->refcnt = 1;
- if (scb->ops->open (scb, open_name))
+ /* `...->open (...)' would get expanded by the open(2) syscall macro. */
+ if ((*scb->ops->open) (scb, open_name))
{
xfree (scb);
return NULL;
scb->name = xstrdup (name);
scb->next = scb_base;
- scb->refcnt = 1;
scb->debug_p = 0;
scb->async_state = 0;
scb->async_handler = NULL;
scb->async_context = NULL;
scb_base = scb;
- last_serial_opened = scb;
-
if (serial_logfile != NULL)
{
serial_logfp = gdb_fopen (serial_logfile, "w");
return scb;
}
-struct serial *
-serial_fdopen (const int fd)
+/* Open a new serial stream using a file handle, using serial
+ interface ops OPS. */
+
+static struct serial *
+serial_fdopen_ops (const int fd, const struct serial_ops *ops)
{
struct serial *scb;
- struct serial_ops *ops;
-
- for (scb = scb_base; scb; scb = scb->next)
- if (scb->fd == fd)
- {
- scb->refcnt++;
- return scb;
- }
- ops = serial_interface_lookup ("hardwire");
+ if (!ops)
+ {
+ ops = serial_interface_lookup ("terminal");
+ if (!ops)
+ ops = serial_interface_lookup ("hardwire");
+ }
if (!ops)
return NULL;
- scb = XMALLOC (struct serial);
+ scb = XCNEW (struct serial);
scb->ops = ops;
scb->bufcnt = 0;
scb->bufp = scb->buf;
-
- scb->fd = fd;
+ scb->error_fd = -1;
+ scb->refcnt = 1;
scb->name = NULL;
scb->next = scb_base;
- scb->refcnt = 1;
scb->debug_p = 0;
scb->async_state = 0;
scb->async_handler = NULL;
scb->async_context = NULL;
scb_base = scb;
- last_serial_opened = scb;
+ if ((ops->fdopen) != NULL)
+ (*ops->fdopen) (scb, fd);
+ else
+ scb->fd = fd;
return scb;
}
+struct serial *
+serial_fdopen (const int fd)
+{
+ return serial_fdopen_ops (fd, NULL);
+}
+
static void
do_serial_close (struct serial *scb, int really_close)
{
struct serial *tmp_scb;
- last_serial_opened = NULL;
-
if (serial_logfp)
{
fputs_unfiltered ("\nEnd of log\n", serial_logfp);
serial_current_type = 0;
- /* XXX - What if serial_logfp == gdb_stdout or gdb_stderr? */
+ /* XXX - What if serial_logfp == gdb_stdout or gdb_stderr? */
ui_file_delete (serial_logfp);
serial_logfp = NULL;
}
-/* This is bogus. It's not our fault if you pass us a bad scb...! Rob, you
- should fix your code instead. */
-
- if (!scb)
- return;
-
- scb->refcnt--;
- if (scb->refcnt > 0)
- return;
-
- /* ensure that the FD has been taken out of async mode */
+ /* ensure that the FD has been taken out of async mode. */
if (scb->async_handler != NULL)
serial_async (scb, NULL, NULL);
if (scb->name)
xfree (scb->name);
+ /* For serial_is_open. */
+ scb->bufp = NULL;
+
if (scb_base == scb)
scb_base = scb_base->next;
else
break;
}
- xfree (scb);
+ serial_unref (scb);
}
void
do_serial_close (scb, 0);
}
+int
+serial_is_open (struct serial *scb)
+{
+ return scb->bufp != NULL;
+}
+
+void
+serial_ref (struct serial *scb)
+{
+ scb->refcnt++;
+}
+
+void
+serial_unref (struct serial *scb)
+{
+ --scb->refcnt;
+ if (scb->refcnt == 0)
+ xfree (scb);
+}
+
int
serial_readchar (struct serial *scb, int timeout)
{
int ch;
/* FIXME: cagney/1999-10-11: Don't enable this check until the ASYNC
- code is finished. */
+ code is finished. */
if (0 && serial_is_async_p (scb) && timeout < 0)
internal_error (__FILE__, __LINE__,
- "serial_readchar: blocking read in async mode");
+ _("serial_readchar: blocking read in async mode"));
ch = scb->ops->readchar (scb, timeout);
if (serial_logfp != NULL)
serial_logchar (serial_logfp, 'r', ch, timeout);
/* Make sure that the log file is as up-to-date as possible,
- in case we are getting ready to dump core or something. */
+ in case we are getting ready to dump core or something. */
gdb_flush (serial_logfp);
}
if (serial_debug_p (scb))
}
int
-serial_write (struct serial *scb, const char *str, int len)
+serial_write (struct serial *scb, const void *buf, size_t count)
{
if (serial_logfp != NULL)
{
- int count;
+ const char *str = (const char *) buf;
+ size_t c;
- for (count = 0; count < len; count++)
- serial_logchar (serial_logfp, 'w', str[count] & 0xff, 0);
+ for (c = 0; c < count; c++)
+ serial_logchar (serial_logfp, 'w', str[c] & 0xff, 0);
/* Make sure that the log file is as up-to-date as possible,
- in case we are getting ready to dump core or something. */
+ in case we are getting ready to dump core or something. */
gdb_flush (serial_logfp);
}
+ if (serial_debug_p (scb))
+ {
+ const char *str = (const char *) buf;
+ size_t c;
+
+ for (c = 0; c < count; c++)
+ {
+ fprintf_unfiltered (gdb_stdlog, "[");
+ serial_logchar (gdb_stdlog, 'w', str[c] & 0xff, 0);
+ fprintf_unfiltered (gdb_stdlog, "]");
+ }
+ gdb_flush (gdb_stdlog);
+ }
- return (scb->ops->write (scb, str, len));
+ return (scb->ops->write (scb, buf, count));
}
void
char *buf;
va_start (args, format);
- xvasprintf (&buf, format, args);
+ buf = xstrvprintf (format, args);
serial_write (desc, buf, strlen (buf));
xfree (buf);
return scb->ops->get_tty_state (scb);
}
+serial_ttystate
+serial_copy_tty_state (struct serial *scb, serial_ttystate ttystate)
+{
+ return scb->ops->copy_tty_state (scb, ttystate);
+}
+
int
serial_set_tty_state (struct serial *scb, serial_ttystate ttystate)
{
return scb->ops->setstopbits (scb, num);
}
+/* See serial.h. */
+
+int
+serial_setparity (struct serial *scb, int parity)
+{
+ return scb->ops->setparity (scb, parity);
+}
+
int
serial_can_async_p (struct serial *scb)
{
serial_event_ftype *handler,
void *context)
{
- /* Only change mode if there is a need. */
- if ((scb->async_handler == NULL)
- != (handler == NULL))
- scb->ops->async (scb, handler != NULL);
+ int changed = ((scb->async_handler == NULL) != (handler == NULL));
+
scb->async_handler = handler;
scb->async_context = context;
-}
-
-int
-deprecated_serial_fd (struct serial *scb)
-{
- /* FIXME: should this output a warning that deprecated code is being
- called? */
- if (scb->fd < 0)
- {
- internal_error (__FILE__, __LINE__,
- "serial: FD not valid");
- }
- return scb->fd; /* sigh */
+ /* Only change mode if there is a need. */
+ if (changed)
+ scb->ops->async (scb, handler != NULL);
}
void
return scb->debug_p || global_serial_debug_p;
}
-
-#if 0
-/* The connect command is #if 0 because I hadn't thought of an elegant
- way to wait for I/O on two `struct serial *'s simultaneously. Two
- solutions came to mind:
-
- 1) Fork, and have have one fork handle the to user direction,
- and have the other hand the to target direction. This
- obviously won't cut it for MSDOS.
-
- 2) Use something like select. This assumes that stdin and
- the target side can both be waited on via the same
- mechanism. This may not be true for DOS, if GDB is
- talking to the target via a TCP socket.
- -grossman, 8 Jun 93 */
-
-/* Connect the user directly to the remote system. This command acts just like
- the 'cu' or 'tip' command. Use <CR>~. or <CR>~^D to break out. */
-
-static struct serial *tty_desc; /* Controlling terminal */
-
-static void
-cleanup_tty (serial_ttystate ttystate)
+#ifdef USE_WIN32API
+void
+serial_wait_handle (struct serial *scb, HANDLE *read, HANDLE *except)
{
- printf_unfiltered ("\r\n[Exiting connect mode]\r\n");
- serial_set_tty_state (tty_desc, ttystate);
- xfree (ttystate);
- serial_close (tty_desc);
+ if (scb->ops->wait_handle)
+ scb->ops->wait_handle (scb, read, except);
+ else
+ {
+ *read = (HANDLE) _get_osfhandle (scb->fd);
+ *except = NULL;
+ }
}
-static void
-connect_command (char *args, int fromtty)
+void
+serial_done_wait_handle (struct serial *scb)
{
- int c;
- char cur_esc = 0;
- serial_ttystate ttystate;
- struct serial *port_desc; /* TTY port */
-
- dont_repeat ();
-
- if (args)
- fprintf_unfiltered (gdb_stderr, "This command takes no args. They have been ignored.\n");
-
- printf_unfiltered ("[Entering connect mode. Use ~. or ~^D to escape]\n");
-
- tty_desc = serial_fdopen (0);
- port_desc = last_serial_opened;
-
- ttystate = serial_get_tty_state (tty_desc);
-
- serial_raw (tty_desc);
- serial_raw (port_desc);
+ if (scb->ops->done_wait_handle)
+ scb->ops->done_wait_handle (scb);
+}
+#endif
- make_cleanup (cleanup_tty, ttystate);
+int
+serial_pipe (struct serial *scbs[2])
+{
+ const struct serial_ops *ops;
+ int fildes[2];
- while (1)
+ ops = serial_interface_lookup ("pipe");
+ if (!ops)
{
- int mask;
-
- mask = serial_wait_2 (tty_desc, port_desc, -1);
-
- if (mask & 2)
- { /* tty input */
- char cx;
-
- while (1)
- {
- c = serial_readchar (tty_desc, 0);
-
- if (c == SERIAL_TIMEOUT)
- break;
-
- if (c < 0)
- perror_with_name ("connect");
-
- cx = c;
- serial_write (port_desc, &cx, 1);
-
- switch (cur_esc)
- {
- case 0:
- if (c == '\r')
- cur_esc = c;
- break;
- case '\r':
- if (c == '~')
- cur_esc = c;
- else
- cur_esc = 0;
- break;
- case '~':
- if (c == '.' || c == '\004')
- return;
- else
- cur_esc = 0;
- }
- }
- }
-
- if (mask & 1)
- { /* Port input */
- char cx;
-
- while (1)
- {
- c = serial_readchar (port_desc, 0);
-
- if (c == SERIAL_TIMEOUT)
- break;
-
- if (c < 0)
- perror_with_name ("connect");
+ errno = ENOSYS;
+ return -1;
+ }
- cx = c;
+ if (gdb_pipe (fildes) == -1)
+ return -1;
- serial_write (tty_desc, &cx, 1);
- }
- }
- }
+ scbs[0] = serial_fdopen_ops (fildes[0], ops);
+ scbs[1] = serial_fdopen_ops (fildes[1], ops);
+ return 0;
}
-#endif /* 0 */
/* Serial set/show framework. */
static void
serial_set_cmd (char *args, int from_tty)
{
- printf_unfiltered ("\"set serial\" must be followed by the name of a command.\n");
- help_list (serial_set_cmdlist, "set serial ", -1, gdb_stdout);
+ printf_unfiltered ("\"set serial\" must be followed "
+ "by the name of a command.\n");
+ help_list (serial_set_cmdlist, "set serial ", all_commands, gdb_stdout);
}
static void
cmd_show_list (serial_show_cmdlist, from_tty, "");
}
+/* Baud rate specified for talking to serial target systems. Default
+ is left as -1, so targets can choose their own defaults. */
+/* FIXME: This means that "show serial baud" and gr_files_info can
+ print -1 or (unsigned int)-1. This is a Bad User Interface. */
+
+int baud_rate = -1;
+
+static void
+serial_baud_show_cmd (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Baud rate for remote serial I/O is %s.\n"),
+ value);
+}
+
+/* Parity for serial port. */
+
+int serial_parity = GDBPARITY_NONE;
+
+static const char parity_none[] = "none";
+static const char parity_odd[] = "odd";
+static const char parity_even[] = "even";
+static const char *const parity_enums[] =
+ {parity_none, parity_odd, parity_even, NULL};
+static const char *parity = parity_none;
+
+/* Set serial_parity value. */
+
+static void
+set_parity (char *ignore_args, int from_tty, struct cmd_list_element *c)
+{
+ if (parity == parity_odd)
+ serial_parity = GDBPARITY_ODD;
+ else if (parity == parity_even)
+ serial_parity = GDBPARITY_EVEN;
+ else
+ serial_parity = GDBPARITY_NONE;
+}
void
_initialize_serial (void)
{
#if 0
- add_com ("connect", class_obscure, connect_command,
- "Connect the terminal directly up to the command monitor.\n\
-Use <CR>~. or <CR>~^D to break out.");
+ add_com ("connect", class_obscure, connect_command, _("\
+Connect the terminal directly up to the command monitor.\n\
+Use <CR>~. or <CR>~^D to break out."));
#endif /* 0 */
- add_prefix_cmd ("serial", class_maintenance, serial_set_cmd, "\
-Set default serial/parallel port configuration.",
+ add_prefix_cmd ("serial", class_maintenance, serial_set_cmd, _("\
+Set default serial/parallel port configuration."),
&serial_set_cmdlist, "set serial ",
0/*allow-unknown*/,
&setlist);
- add_prefix_cmd ("serial", class_maintenance, serial_show_cmd, "\
-Show default serial/parallel port configuration.",
+ add_prefix_cmd ("serial", class_maintenance, serial_show_cmd, _("\
+Show default serial/parallel port configuration."),
&serial_show_cmdlist, "show serial ",
0/*allow-unknown*/,
&showlist);
- add_show_from_set
- (add_set_cmd ("remotelogfile", no_class,
- var_filename, (char *) &serial_logfile,
- "Set filename for remote session recording.\n\
+ /* If target is open when baud changes, it doesn't take effect until
+ the next open (I think, not sure). */
+ add_setshow_zinteger_cmd ("baud", no_class, &baud_rate, _("\
+Set baud rate for remote serial I/O."), _("\
+Show baud rate for remote serial I/O."), _("\
+This value is used to set the speed of the serial port when debugging\n\
+using remote targets."),
+ NULL,
+ serial_baud_show_cmd,
+ &serial_set_cmdlist, &serial_show_cmdlist);
+
+ add_setshow_enum_cmd ("parity", no_class, parity_enums,
+ &parity, _("\
+Set parity for remote serial I/O"), _("\
+Show parity for remote serial I/O"), NULL,
+ set_parity,
+ NULL, /* FIXME: i18n: */
+ &serial_set_cmdlist, &serial_show_cmdlist);
+
+ add_setshow_filename_cmd ("remotelogfile", no_class, &serial_logfile, _("\
+Set filename for remote session recording."), _("\
+Show filename for remote session recording."), _("\
This file is used to record the remote session for future playback\n\
-by gdbserver.",
- &setlist),
- &showlist);
-
- add_show_from_set
- (add_set_enum_cmd ("remotelogbase", no_class,
- logbase_enums, &serial_logbase,
- "Set numerical base for remote session logging",
- &setlist),
- &showlist);
-
- add_show_from_set (add_set_cmd ("serial",
- class_maintenance,
- var_zinteger,
- (char *)&global_serial_debug_p,
- "Set serial debugging.\n\
-When non-zero, serial port debugging is enabled.", &setdebuglist),
- &showdebuglist);
+by gdbserver."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_enum_cmd ("remotelogbase", no_class, logbase_enums,
+ &serial_logbase, _("\
+Set numerical base for remote session logging"), _("\
+Show numerical base for remote session logging"), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zuinteger_cmd ("serial", class_maintenance,
+ &global_serial_debug_p, _("\
+Set serial debugging."), _("\
+Show serial debugging."), _("\
+When non-zero, serial port debugging is enabled."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setdebuglist, &showdebuglist);
}