/* Generic serial interface routines
- Copyright (C) 1992-2002, 2004-2012 Free Software Foundation, Inc.
+ Copyright (C) 1992-2015 Free Software Foundation, Inc.
This file is part of GDB.
#include "defs.h"
#include <ctype.h>
#include "serial.h"
-#include "gdb_string.h"
#include "gdbcmd.h"
+#include "cli/cli-utils.h"
extern void _initialize_serial (void);
/* Is serial being debugged? */
-static int global_serial_debug_p;
+static unsigned int global_serial_debug_p;
-/* Linked list of serial I/O handlers. */
+typedef const struct serial_ops *serial_ops_p;
+DEF_VEC_P (serial_ops_p);
-static struct serial_ops *serial_ops_list = NULL;
+/* Serial I/O handlers. */
+
+VEC (serial_ops_p) *serial_ops_list = NULL;
/* Pointer to list of scb's. */
static char *serial_logfile = NULL;
static struct ui_file *serial_logfp = NULL;
-static struct serial_ops *serial_interface_lookup (const char *);
+static const struct serial_ops *serial_interface_lookup (const char *);
static void serial_logchar (struct ui_file *stream,
int ch_type, int ch, int timeout);
static const char logbase_hex[] = "hex";
}
void
-serial_log_command (const char *cmd)
+serial_log_command (struct target_ops *self, const char *cmd)
{
if (!serial_logfp)
return;
}
\f
-static struct serial_ops *
+static const struct serial_ops *
serial_interface_lookup (const char *name)
{
- struct serial_ops *ops;
+ const struct serial_ops *ops;
+ int i;
- for (ops = serial_ops_list; ops; ops = ops->next)
+ for (i = 0; VEC_iterate (serial_ops_p, serial_ops_list, i, ops); ++i)
if (strcmp (name, ops->name) == 0)
return ops;
}
void
-serial_add_interface (struct serial_ops *optable)
+serial_add_interface (const struct serial_ops *optable)
{
- optable->next = serial_ops_list;
- serial_ops_list = optable;
+ VEC_safe_push (serial_ops_p, serial_ops_list, optable);
}
/* Return the open serial device for FD, if found, or NULL if FD is
serial_open (const char *name)
{
struct serial *scb;
- struct serial_ops *ops;
+ const struct serial_ops *ops;
const char *open_name = name;
if (strcmp (name, "pc") == 0)
ops = serial_interface_lookup ("pc");
- else if (strncmp (name, "lpt", 3) == 0)
+ else if (startswith (name, "lpt"))
ops = serial_interface_lookup ("parallel");
- else if (strncmp (name, "|", 1) == 0)
+ else if (startswith (name, "|"))
{
ops = serial_interface_lookup ("pipe");
/* Discard ``|'' and any space before the command itself. */
++open_name;
- while (isspace (*open_name))
- ++open_name;
+ open_name = skip_spaces_const (open_name);
}
/* Check for a colon, suggesting an IP address/port pair.
Do this *after* checking for all the interesting prefixes. We
if (!ops)
return NULL;
- scb = XMALLOC (struct serial);
+ scb = XNEW (struct serial);
scb->ops = ops;
interface ops OPS. */
static struct serial *
-serial_fdopen_ops (const int fd, struct serial_ops *ops)
+serial_fdopen_ops (const int fd, const struct serial_ops *ops)
{
struct serial *scb;
if (!ops)
return NULL;
- scb = XCALLOC (1, struct serial);
+ scb = XCNEW (struct serial);
scb->ops = ops;
}
int
-serial_write (struct serial *scb, const char *str, int len)
+serial_write (struct serial *scb, const void *buf, size_t count)
{
if (serial_logfp != NULL)
{
- int count;
+ const char *str = (const char *) buf;
+ size_t c;
- for (count = 0; count < len; count++)
- serial_logchar (serial_logfp, 'w', str[count] & 0xff, 0);
+ for (c = 0; c < count; c++)
+ serial_logchar (serial_logfp, 'w', str[c] & 0xff, 0);
/* Make sure that the log file is as up-to-date as possible,
in case we are getting ready to dump core or something. */
}
if (serial_debug_p (scb))
{
- int count;
+ const char *str = (const char *) buf;
+ size_t c;
- for (count = 0; count < len; count++)
+ for (c = 0; c < count; c++)
{
fprintf_unfiltered (gdb_stdlog, "[");
- serial_logchar (gdb_stdlog, 'w', str[count] & 0xff, 0);
+ serial_logchar (gdb_stdlog, 'w', str[c] & 0xff, 0);
fprintf_unfiltered (gdb_stdlog, "]");
}
gdb_flush (gdb_stdlog);
}
- return (scb->ops->write (scb, str, len));
+ return (scb->ops->write (scb, buf, count));
}
void
return scb->ops->setstopbits (scb, num);
}
+/* See serial.h. */
+
+int
+serial_setparity (struct serial *scb, int parity)
+{
+ return scb->ops->setparity (scb, parity);
+}
+
int
serial_can_async_p (struct serial *scb)
{
scb->ops->async (scb, handler != NULL);
}
-int
-deprecated_serial_fd (struct serial *scb)
-{
- /* FIXME: should this output a warning that deprecated code is being
- called? */
- if (scb->fd < 0)
- {
- internal_error (__FILE__, __LINE__,
- _("serial: FD not valid"));
- }
- return scb->fd; /* sigh */
-}
-
void
serial_debug (struct serial *scb, int debug_p)
{
int
serial_pipe (struct serial *scbs[2])
{
- struct serial_ops *ops;
+ const struct serial_ops *ops;
int fildes[2];
ops = serial_interface_lookup ("pipe");
{
printf_unfiltered ("\"set serial\" must be followed "
"by the name of a command.\n");
- help_list (serial_set_cmdlist, "set serial ", -1, gdb_stdout);
+ help_list (serial_set_cmdlist, "set serial ", all_commands, gdb_stdout);
}
static void
cmd_show_list (serial_show_cmdlist, from_tty, "");
}
+/* Baud rate specified for talking to serial target systems. Default
+ is left as -1, so targets can choose their own defaults. */
+/* FIXME: This means that "show serial baud" and gr_files_info can
+ print -1 or (unsigned int)-1. This is a Bad User Interface. */
+
+int baud_rate = -1;
+
+static void
+serial_baud_show_cmd (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Baud rate for remote serial I/O is %s.\n"),
+ value);
+}
+
+/* Parity for serial port. */
+
+int serial_parity = GDBPARITY_NONE;
+
+static const char parity_none[] = "none";
+static const char parity_odd[] = "odd";
+static const char parity_even[] = "even";
+static const char *const parity_enums[] =
+ {parity_none, parity_odd, parity_even, NULL};
+static const char *parity = parity_none;
+
+/* Set serial_parity value. */
+
+static void
+set_parity (char *ignore_args, int from_tty, struct cmd_list_element *c)
+{
+ if (parity == parity_odd)
+ serial_parity = GDBPARITY_ODD;
+ else if (parity == parity_even)
+ serial_parity = GDBPARITY_EVEN;
+ else
+ serial_parity = GDBPARITY_NONE;
+}
void
_initialize_serial (void)
0/*allow-unknown*/,
&showlist);
+ /* If target is open when baud changes, it doesn't take effect until
+ the next open (I think, not sure). */
+ add_setshow_zinteger_cmd ("baud", no_class, &baud_rate, _("\
+Set baud rate for remote serial I/O."), _("\
+Show baud rate for remote serial I/O."), _("\
+This value is used to set the speed of the serial port when debugging\n\
+using remote targets."),
+ NULL,
+ serial_baud_show_cmd,
+ &serial_set_cmdlist, &serial_show_cmdlist);
+
+ add_setshow_enum_cmd ("parity", no_class, parity_enums,
+ &parity, _("\
+Set parity for remote serial I/O"), _("\
+Show parity for remote serial I/O"), NULL,
+ set_parity,
+ NULL, /* FIXME: i18n: */
+ &serial_set_cmdlist, &serial_show_cmdlist);
+
add_setshow_filename_cmd ("remotelogfile", no_class, &serial_logfile, _("\
Set filename for remote session recording."), _("\
Show filename for remote session recording."), _("\
NULL, /* FIXME: i18n: */
&setlist, &showlist);
- add_setshow_zinteger_cmd ("serial", class_maintenance,
- &global_serial_debug_p, _("\
+ add_setshow_zuinteger_cmd ("serial", class_maintenance,
+ &global_serial_debug_p, _("\
Set serial debugging."), _("\
Show serial debugging."), _("\
When non-zero, serial port debugging is enabled."),
- NULL,
- NULL, /* FIXME: i18n: */
- &setdebuglist, &showdebuglist);
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setdebuglist, &showdebuglist);
}