#include "osabi.h"
#include "reggroups.h"
#include "regset.h"
+#include "objfiles.h"
#include "sh-tdep.h"
+#include "sh64-tdep.h"
#include "elf-bfd.h"
#include "solib-svr4.h"
static int
sh_is_renesas_calling_convention (struct type *func_type)
{
- return ((func_type
- && TYPE_CALLING_CONVENTION (func_type) == DW_CC_GNU_renesas_sh)
- || sh_active_calling_convention == sh_cc_renesas);
+ int val = 0;
+
+ if (func_type)
+ {
+ func_type = check_typedef (func_type);
+
+ if (TYPE_CODE (func_type) == TYPE_CODE_PTR)
+ func_type = check_typedef (TYPE_TARGET_TYPE (func_type));
+
+ if (TYPE_CODE (func_type) == TYPE_CODE_FUNC
+ && TYPE_CALLING_CONVENTION (func_type) == DW_CC_GNU_renesas_sh)
+ val = 1;
+ }
+
+ if (sh_active_calling_convention == sh_cc_renesas)
+ val = 1;
+
+ return val;
}
static const char *
static CORE_ADDR
sh_analyze_prologue (struct gdbarch *gdbarch,
- CORE_ADDR pc, CORE_ADDR current_pc,
+ CORE_ADDR pc, CORE_ADDR limit_pc,
struct sh_frame_cache *cache, ULONGEST fpscr)
{
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
ULONGEST inst;
- CORE_ADDR opc;
int offset;
int sav_offset = 0;
int r3_val = 0;
int reg, sav_reg = -1;
- if (pc >= current_pc)
- return current_pc;
-
cache->uses_fp = 0;
- for (opc = pc + (2 * 28); pc < opc; pc += 2)
+ for (; pc < limit_pc; pc += 2)
{
inst = read_memory_unsigned_integer (pc, 2, byte_order);
/* See where the registers will be saved to. */
}
}
}
- else if (IS_MOVI20 (inst))
+ else if (IS_MOVI20 (inst)
+ && (pc + 2 < limit_pc))
{
if (sav_reg < 0)
{
}
else if (IS_MOV_SP_FP (inst))
{
+ pc += 2;
+ /* Don't go any further than six more instructions. */
+ limit_pc = min (limit_pc, pc + (2 * 6));
+
cache->uses_fp = 1;
/* At this point, only allow argument register moves to other
registers or argument register moves to @(X,fp) which are
moving the register arguments onto the stack area allocated
by a former add somenumber to SP call. Don't allow moving
to an fp indirect address above fp + cache->sp_offset. */
- pc += 2;
- for (opc = pc + 12; pc < opc; pc += 2)
+ for (; pc < limit_pc; pc += 2)
{
inst = read_memory_integer (pc, 2, byte_order);
if (IS_MOV_ARG_TO_IND_R14 (inst))
jsr, which will be very confusing. Most likely the next
instruction is going to be IS_MOV_SP_FP in the delay slot. If
so, note that before returning the current pc. */
- inst = read_memory_integer (pc + 2, 2, byte_order);
- if (IS_MOV_SP_FP (inst))
- cache->uses_fp = 1;
+ if (pc + 2 < limit_pc)
+ {
+ inst = read_memory_integer (pc + 2, 2, byte_order);
+ if (IS_MOV_SP_FP (inst))
+ cache->uses_fp = 1;
+ }
break;
}
#if 0 /* This used to just stop when it found an instruction
}
/* Skip any prologue before the guts of a function. */
-
-/* Skip the prologue using the debug information. If this fails we'll
- fall back on the 'guess' method below. */
static CORE_ADDR
-after_prologue (CORE_ADDR pc)
+sh_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
- struct symtab_and_line sal;
- CORE_ADDR func_addr, func_end;
-
- /* If we can not find the symbol in the partial symbol table, then
- there is no hope we can determine the function's start address
- with this code. */
- if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
- return 0;
-
- /* Get the line associated with FUNC_ADDR. */
- sal = find_pc_line (func_addr, 0);
-
- /* There are only two cases to consider. First, the end of the source line
- is within the function bounds. In that case we return the end of the
- source line. Second is the end of the source line extends beyond the
- bounds of the current function. We need to use the slow code to
- examine instructions in that case. */
- if (sal.end < func_end)
- return sal.end;
- else
- return 0;
-}
-
-static CORE_ADDR
-sh_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR start_pc)
-{
- CORE_ADDR pc;
+ CORE_ADDR post_prologue_pc, func_addr, func_end_addr, limit_pc;
struct sh_frame_cache cache;
/* See if we can determine the end of the prologue via the symbol table.
If so, then return either PC, or the PC after the prologue, whichever
is greater. */
- pc = after_prologue (start_pc);
+ if (find_pc_partial_function (pc, NULL, &func_addr, &func_end_addr))
+ {
+ post_prologue_pc = skip_prologue_using_sal (gdbarch, func_addr);
+ if (post_prologue_pc != 0)
+ return max (pc, post_prologue_pc);
+ }
+
+ /* Can't determine prologue from the symbol table, need to examine
+ instructions. */
+
+ /* Find an upper limit on the function prologue using the debug
+ information. If the debug information could not be used to provide
+ that bound, then use an arbitrary large number as the upper bound. */
+ limit_pc = skip_prologue_using_sal (gdbarch, pc);
+ if (limit_pc == 0)
+ /* Don't go any further than 28 instructions. */
+ limit_pc = pc + (2 * 28);
- /* If after_prologue returned a useful address, then use it. Else
- fall back on the instruction skipping code. */
- if (pc)
- return max (pc, start_pc);
+ /* Do not allow limit_pc to be past the function end, if we know
+ where that end is... */
+ if (func_end_addr != 0)
+ limit_pc = min (limit_pc, func_end_addr);
cache.sp_offset = -4;
- pc = sh_analyze_prologue (gdbarch, start_pc, (CORE_ADDR) -1, &cache, 0);
- if (!cache.uses_fp)
- return start_pc;
+ post_prologue_pc = sh_analyze_prologue (gdbarch, pc, limit_pc, &cache, 0);
+ if (cache.uses_fp)
+ pc = post_prologue_pc;
return pc;
}
if (cache->pc != 0)
{
ULONGEST fpscr;
- fpscr = get_frame_register_unsigned (this_frame, FPSCR_REGNUM);
+
+ /* Check for the existence of the FPSCR register. If it exists,
+ fetch its value for use in prologue analysis. Passing a zero
+ value is the best choice for architecture variants upon which
+ there's no FPSCR register. */
+ if (gdbarch_register_reggroup_p (gdbarch, FPSCR_REGNUM, all_reggroup))
+ fpscr = get_frame_register_unsigned (this_frame, FPSCR_REGNUM);
+ else
+ fpscr = 0;
+
sh_analyze_prologue (gdbarch, cache->pc, current_pc, cache, fpscr);
}
sh_frame_base_address
};
+static struct sh_frame_cache *
+sh_make_stub_cache (struct frame_info *this_frame)
+{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ struct sh_frame_cache *cache;
+
+ cache = sh_alloc_frame_cache ();
+
+ cache->saved_sp
+ = get_frame_register_unsigned (this_frame, gdbarch_sp_regnum (gdbarch));
+
+ return cache;
+}
+
+static void
+sh_stub_this_id (struct frame_info *this_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct sh_frame_cache *cache;
+
+ if (*this_cache == NULL)
+ *this_cache = sh_make_stub_cache (this_frame);
+ cache = *this_cache;
+
+ *this_id = frame_id_build (cache->saved_sp, get_frame_pc (this_frame));
+}
+
+static int
+sh_stub_unwind_sniffer (const struct frame_unwind *self,
+ struct frame_info *this_frame,
+ void **this_prologue_cache)
+{
+ CORE_ADDR addr_in_block;
+
+ addr_in_block = get_frame_address_in_block (this_frame);
+ if (in_plt_section (addr_in_block, NULL))
+ return 1;
+
+ return 0;
+}
+
+static const struct frame_unwind sh_stub_unwind =
+{
+ NORMAL_FRAME,
+ default_frame_unwind_stop_reason,
+ sh_stub_this_id,
+ sh_frame_prev_register,
+ NULL,
+ sh_stub_unwind_sniffer
+};
+
/* The epilogue is defined here as the area at the end of a function,
either on the `ret' instruction itself or after an instruction which
destroys the function's stack frame. */
gdbarch_init_osabi (info, gdbarch);
dwarf2_append_unwinders (gdbarch);
+ frame_unwind_append_unwinder (gdbarch, &sh_stub_unwind);
frame_unwind_append_unwinder (gdbarch, &sh_frame_unwind);
return gdbarch;