/* Handle SunOS shared libraries for GDB, the GNU Debugger.
- Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000,
- 2001
- Free Software Foundation, Inc.
+
+ Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000,
+ 2001, 2004, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include <sys/param.h>
#include <fcntl.h>
- /* SunOS shared libs need the nlist structure. */
+/* SunOS shared libs need the nlist structure. */
#include <a.out.h>
#include <link.h>
#include "objfiles.h"
#include "gdbcore.h"
#include "inferior.h"
+#include "gdbthread.h"
#include "solist.h"
+#include "bcache.h"
+#include "regcache.h"
+
+/* The shared library implementation found on BSD a.out systems is
+ very similar to the SunOS implementation. However, the data
+ structures defined in <link.h> are named very differently. Make up
+ for those differences here. */
+
+#ifdef HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS
+
+/* FIXME: Temporary until the equivalent defines have been removed
+ from all nm-*bsd*.h files. */
+#ifndef link_dynamic
+
+/* Map `struct link_map' and its members. */
+#define link_map so_map
+#define lm_addr som_addr
+#define lm_name som_path
+#define lm_next som_next
+
+/* Map `struct link_dynamic_2' and its members. */
+#define link_dynamic_2 section_dispatch_table
+#define ld_loaded sdt_loaded
+
+/* Map `struct rtc_symb' and its members. */
+#define rtc_symb rt_symbol
+#define rtc_sp rt_sp
+#define rtc_next rt_next
+
+/* Map `struct ld_debug' and its members. */
+#define ld_debug so_debug
+#define ldd_in_debugger dd_in_debugger
+#define ldd_bp_addr dd_bpt_addr
+#define ldd_bp_inst dd_bpt_shadow
+#define ldd_cp dd_cc
+
+/* Map `struct link_dynamic' and its members. */
+#define link_dynamic _dynamic
+#define ld_version d_version
+#define ldd d_debug
+#define ld_un d_un
+#define ld_2 d_sdt
+
+#endif
-/* Link map info to include in an allocated so_list entry */
+#endif
+
+/* Link map info to include in an allocated so_list entry. */
struct lm_info
{
};
-/* Symbols which are used to locate the base of the link map structures. */
+/* Symbols which are used to locate the base of the link map structures. */
static char *debug_base_symbols[] =
{
NULL
};
-/* Macro to extract an address from a solib structure.
- When GDB is configured for some 32-bit targets (e.g. Solaris 2.7
- sparc), BFD is configured to handle 64-bit targets, so CORE_ADDR is
- 64 bits. We have to extract only the significant bits of addresses
- to get the right address when accessing the core file BFD. */
+/* Macro to extract an address from a solib structure. When GDB is
+ configured for some 32-bit targets (e.g. Solaris 2.7 sparc), BFD is
+ configured to handle 64-bit targets, so CORE_ADDR is 64 bits. We
+ have to extract only the significant bits of addresses to get the
+ right address when accessing the core file BFD.
+
+ Assume that the address is unsigned. */
#define SOLIB_EXTRACT_ADDRESS(MEMBER) \
- extract_address (&(MEMBER), sizeof (MEMBER))
+ extract_unsigned_integer (&(MEMBER), sizeof (MEMBER), \
+ gdbarch_byte_order (target_gdbarch))
/* local data declarations */
static CORE_ADDR
LM_ADDR (struct so_list *so)
{
+ enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch);
int lm_addr_offset = offsetof (struct link_map, lm_addr);
int lm_addr_size = fieldsize (struct link_map, lm_addr);
return (CORE_ADDR) extract_signed_integer (so->lm_info->lm + lm_addr_offset,
- lm_addr_size);
+ lm_addr_size, byte_order);
}
static CORE_ADDR
LM_NEXT (struct so_list *so)
{
+ enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch);
int lm_next_offset = offsetof (struct link_map, lm_next);
int lm_next_size = fieldsize (struct link_map, lm_next);
- return extract_address (so->lm_info->lm + lm_next_offset, lm_next_size);
+ /* Assume that the address is unsigned. */
+ return extract_unsigned_integer (so->lm_info->lm + lm_next_offset,
+ lm_next_size, byte_order);
}
static CORE_ADDR
LM_NAME (struct so_list *so)
{
+ enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch);
int lm_name_offset = offsetof (struct link_map, lm_name);
int lm_name_size = fieldsize (struct link_map, lm_name);
- return extract_address (so->lm_info->lm + lm_name_offset, lm_name_size);
+ /* Assume that the address is unsigned. */
+ return extract_unsigned_integer (so->lm_info->lm + lm_name_offset,
+ lm_name_size, byte_order);
}
-static CORE_ADDR debug_base; /* Base of dynamic linker structures */
+static CORE_ADDR debug_base; /* Base of dynamic linker structures. */
/* Local function prototypes */
objfile = (struct objfile *) xmalloc (sizeof (struct objfile));
memset (objfile, 0, sizeof (struct objfile));
- objfile->md = NULL;
- obstack_specify_allocation (&objfile->psymbol_cache.cache, 0, 0,
- xmalloc, xfree);
- obstack_specify_allocation (&objfile->psymbol_obstack, 0, 0, xmalloc,
- xfree);
- obstack_specify_allocation (&objfile->symbol_obstack, 0, 0, xmalloc,
- xfree);
- obstack_specify_allocation (&objfile->type_obstack, 0, 0, xmalloc,
- xfree);
- objfile->name = mstrsave (objfile->md, "rt_common");
-
- /* Add this file onto the tail of the linked list of other such files. */
+ objfile->psymbol_cache = bcache_xmalloc ();
+ objfile->macro_cache = bcache_xmalloc ();
+ objfile->filename_cache = bcache_xmalloc ();
+ obstack_init (&objfile->objfile_obstack);
+ objfile->name = xstrdup ("rt_common");
+
+ /* Add this file onto the tail of the linked list of other such files. */
objfile->next = NULL;
if (object_files == NULL)
if (rt_common_objfile != NULL && rt_common_objfile->minimal_symbol_count)
{
- obstack_free (&rt_common_objfile->symbol_obstack, 0);
- obstack_specify_allocation (&rt_common_objfile->symbol_obstack, 0, 0,
- xmalloc, xfree);
+ obstack_free (&rt_common_objfile->objfile_obstack, 0);
+ obstack_init (&rt_common_objfile->objfile_obstack);
rt_common_objfile->minimal_symbol_count = 0;
rt_common_objfile->msymbols = NULL;
+ terminate_minimal_symbol_table (rt_common_objfile);
}
init_minimal_symbol_collection ();
{
/* FIXME: The length of the symbol name is not available, but in the
current implementation the common symbol is allocated immediately
- behind the name of the symbol. */
+ behind the name of the symbol. */
len = inferior_rtc_nlist.n_value - inferior_rtc_nlist.n_un.n_strx;
name = xmalloc (len);
read_memory (SOLIB_EXTRACT_ADDRESS (inferior_rtc_nlist.n_un.n_name),
name, len);
- /* Allocate the runtime common objfile if necessary. */
+ /* Allocate the runtime common objfile if necessary. */
if (rt_common_objfile == NULL)
allocate_rt_common_objfile ();
/* For SunOS, we want to limit the search for the debug base symbol to the
executable being debugged, since there is a duplicate named symbol in the
- shared library. We don't want the shared library versions. */
+ shared library. We don't want the shared library versions. */
for (symbolp = debug_base_symbols; *symbolp != NULL; symbolp++)
{
if (dynamic_copy.ld_version >= 2)
{
/* It is a version that we can deal with, so read in the secondary
- structure and find the address of the link map list from it. */
+ structure and find the address of the link map list from it. */
read_memory (SOLIB_EXTRACT_ADDRESS (dynamic_copy.ld_un.ld_2),
(char *) &ld_2_copy, sizeof (struct link_dynamic_2));
lm = SOLIB_EXTRACT_ADDRESS (ld_2_copy.ld_loaded);
target_read_string (LM_NAME (new), &buffer,
SO_NAME_MAX_PATH_SIZE - 1, &errcode);
if (errcode != 0)
- {
- warning ("current_sos: Can't read pathname for load map: %s\n",
- safe_strerror (errcode));
- }
+ warning (_("Can't read pathname for load map: %s."),
+ safe_strerror (errcode));
else
{
strncpy (new->so_name, buffer, SO_NAME_MAX_PATH_SIZE - 1);
static int
disable_break (void)
{
- CORE_ADDR breakpoint_addr; /* Address where end bkpt is set */
+ CORE_ADDR breakpoint_addr; /* Address where end bkpt is set. */
int in_debugger = 0;
/* Read the debugger structure from the inferior to retrieve the
address of the breakpoint and the original contents of the
breakpoint address. Remove the breakpoint by writing the original
- contents back. */
+ contents back. */
read_memory (debug_addr, (char *) &debug_copy, sizeof (debug_copy));
- /* Set `in_debugger' to zero now. */
+ /* Set `in_debugger' to zero now. */
write_memory (flag_addr, (char *) &in_debugger, sizeof (in_debugger));
/* For the SVR4 version, we always know the breakpoint address. For the
SunOS version we don't know it until the above code is executed.
- Grumble if we are stopped anywhere besides the breakpoint address. */
+ Grumble if we are stopped anywhere besides the breakpoint address. */
if (stop_pc != breakpoint_addr)
{
- warning ("stopped at unknown breakpoint while handling shared libraries");
+ warning (_("stopped at unknown breakpoint "
+ "while handling shared libraries"));
}
return 1;
int j;
int in_debugger;
- /* Get link_dynamic structure */
+ /* Get link_dynamic structure. */
j = target_read_memory (debug_base, (char *) &dynamic_copy,
sizeof (dynamic_copy));
return (0);
}
- /* Calc address of debugger interface structure */
+ /* Calc address of debugger interface structure. */
debug_addr = SOLIB_EXTRACT_ADDRESS (dynamic_copy.ldd);
- /* Calc address of `in_debugger' member of debugger interface structure */
+ /* Calc address of `in_debugger' member of debugger interface structure. */
flag_addr = debug_addr + (CORE_ADDR) ((char *) &debug_copy.ldd_in_debugger -
(char *) &debug_copy);
if (debug_addr == 0)
{
- /* Get link_dynamic structure */
+ /* Get link_dynamic structure. */
j = target_read_memory (debug_base, (char *) &dynamic_copy,
sizeof (dynamic_copy));
return;
}
- /* Calc address of debugger interface structure */
+ /* Calc address of debugger interface structure. */
/* FIXME, this needs work for cross-debugging of core files
(byteorder, size, alignment, etc). */
}
/* Read the debugger structure from the inferior, just to make sure
- we have a current copy. */
+ we have a current copy. */
j = target_read_memory (debug_addr, (char *) &debug_copy,
sizeof (debug_copy));
if (j)
return; /* unreadable */
- /* Get common symbol definitions for the loaded object. */
+ /* Get common symbol definitions for the loaded object. */
if (debug_copy.ldd_cp)
{
}
}
-/* Relocate the main executable. This function should be called upon
- stopping the inferior process at the entry point to the program.
- The entry point from BFD is compared to the PC and if they are
- different, the main executable is relocated by the proper amount.
-
- As written it will only attempt to relocate executables which
- lack interpreter sections. It seems likely that only dynamic
- linker executables will get relocated, though it should work
- properly for a position-independent static executable as well. */
-
-static void
-sunos_relocate_main_executable (void)
-{
- asection *interp_sect;
- CORE_ADDR pc = read_pc ();
-
- /* Decide if the objfile needs to be relocated. As indicated above,
- we will only be here when execution is stopped at the beginning
- of the program. Relocation is necessary if the address at which
- we are presently stopped differs from the start address stored in
- the executable AND there's no interpreter section. The condition
- regarding the interpreter section is very important because if
- there *is* an interpreter section, execution will begin there
- instead. When there is an interpreter section, the start address
- is (presumably) used by the interpreter at some point to start
- execution of the program.
-
- If there is an interpreter, it is normal for it to be set to an
- arbitrary address at the outset. The job of finding it is
- handled in enable_break().
-
- So, to summarize, relocations are necessary when there is no
- interpreter section and the start address obtained from the
- executable is different from the address at which GDB is
- currently stopped.
-
- [ The astute reader will note that we also test to make sure that
- the executable in question has the DYNAMIC flag set. It is my
- opinion that this test is unnecessary (undesirable even). It
- was added to avoid inadvertent relocation of an executable
- whose e_type member in the ELF header is not ET_DYN. There may
- be a time in the future when it is desirable to do relocations
- on other types of files as well in which case this condition
- should either be removed or modified to accomodate the new file
- type. (E.g, an ET_EXEC executable which has been built to be
- position-independent could safely be relocated by the OS if
- desired. It is true that this violates the ABI, but the ABI
- has been known to be bent from time to time.) - Kevin, Nov 2000. ]
- */
-
- interp_sect = bfd_get_section_by_name (exec_bfd, ".interp");
- if (interp_sect == NULL
- && (bfd_get_file_flags (exec_bfd) & DYNAMIC) != 0
- && bfd_get_start_address (exec_bfd) != pc)
- {
- struct cleanup *old_chain;
- struct section_offsets *new_offsets;
- int i, changed;
- CORE_ADDR displacement;
-
- /* It is necessary to relocate the objfile. The amount to
- relocate by is simply the address at which we are stopped
- minus the starting address from the executable.
-
- We relocate all of the sections by the same amount. This
- behavior is mandated by recent editions of the System V ABI.
- According to the System V Application Binary Interface,
- Edition 4.1, page 5-5:
-
- ... Though the system chooses virtual addresses for
- individual processes, it maintains the segments' relative
- positions. Because position-independent code uses relative
- addressesing between segments, the difference between
- virtual addresses in memory must match the difference
- between virtual addresses in the file. The difference
- between the virtual address of any segment in memory and
- the corresponding virtual address in the file is thus a
- single constant value for any one executable or shared
- object in a given process. This difference is the base
- address. One use of the base address is to relocate the
- memory image of the program during dynamic linking.
-
- The same language also appears in Edition 4.0 of the System V
- ABI and is left unspecified in some of the earlier editions. */
-
- displacement = pc - bfd_get_start_address (exec_bfd);
- changed = 0;
-
- new_offsets = xcalloc (sizeof (struct section_offsets),
- symfile_objfile->num_sections);
- old_chain = make_cleanup (xfree, new_offsets);
-
- for (i = 0; i < symfile_objfile->num_sections; i++)
- {
- if (displacement != ANOFFSET (symfile_objfile->section_offsets, i))
- changed = 1;
- new_offsets->offsets[i] = displacement;
- }
-
- if (changed)
- objfile_relocate (symfile_objfile, new_offsets);
-
- do_cleanups (old_chain);
- }
-}
-
/*
GLOBAL FUNCTION
SYNOPSIS
- void sunos_solib_create_inferior_hook()
+ void sunos_solib_create_inferior_hook ()
DESCRIPTION
*/
static void
-sunos_solib_create_inferior_hook (void)
+sunos_solib_create_inferior_hook (int from_tty)
{
- /* Relocate the main executable if necessary. */
- sunos_relocate_main_executable ();
+ struct thread_info *tp;
+ struct inferior *inf;
if ((debug_base = locate_base ()) == 0)
{
- /* Can't find the symbol or the executable is statically linked. */
+ /* Can't find the symbol or the executable is statically linked. */
return;
}
if (!enable_break ())
{
- warning ("shared library handler failed to enable breakpoint");
+ warning (_("shared library handler failed to enable breakpoint"));
return;
}
Now run the target. It will eventually hit the breakpoint, at
which point all of the libraries will have been mapped in and we
can go groveling around in the dynamic linker structures to find
- out what we need to know about them. */
+ out what we need to know about them. */
+
+ inf = current_inferior ();
+ tp = inferior_thread ();
clear_proceed_status ();
- stop_soon_quietly = 1;
- stop_signal = TARGET_SIGNAL_0;
+
+ inf->control.stop_soon = STOP_QUIETLY;
+ tp->suspend.stop_signal = TARGET_SIGNAL_0;
do
{
- target_resume (pid_to_ptid (-1), 0, stop_signal);
- wait_for_inferior ();
+ target_resume (pid_to_ptid (-1), 0, tp->suspend.stop_signal);
+ wait_for_inferior (0);
}
- while (stop_signal != TARGET_SIGNAL_TRAP);
- stop_soon_quietly = 0;
+ while (tp->suspend.stop_signal != TARGET_SIGNAL_TRAP);
+ inf->control.stop_soon = NO_STOP_QUIETLY;
/* We are now either at the "mapping complete" breakpoint (or somewhere
else, a condition we aren't prepared to deal with anyway), so adjust
the PC as necessary after a breakpoint, disable the breakpoint, and
- add any shared libraries that were mapped in. */
+ add any shared libraries that were mapped in.
+
+ Note that adjust_pc_after_break did not perform any PC adjustment,
+ as the breakpoint the inferior just hit was not inserted by GDB,
+ but by the dynamic loader itself, and is therefore not found on
+ the GDB software break point list. Thus we have to adjust the
+ PC here. */
- if (DECR_PC_AFTER_BREAK)
+ if (gdbarch_decr_pc_after_break (target_gdbarch))
{
- stop_pc -= DECR_PC_AFTER_BREAK;
- write_register (PC_REGNUM, stop_pc);
+ stop_pc -= gdbarch_decr_pc_after_break (target_gdbarch);
+ regcache_write_pc (get_current_regcache (), stop_pc);
}
if (!disable_break ())
{
- warning ("shared library handler failed to disable breakpoint");
+ warning (_("shared library handler failed to disable breakpoint"));
}
- if (auto_solib_add)
- solib_add ((char *) 0, 0, (struct target_ops *) 0);
+ solib_add ((char *) 0, 0, (struct target_ops *) 0, auto_solib_add);
}
static void
static void
sunos_relocate_section_addresses (struct so_list *so,
- struct section_table *sec)
+ struct target_section *sec)
{
sec->addr += LM_ADDR (so);
sec->endaddr += LM_ADDR (so);
sunos_so_ops.current_sos = sunos_current_sos;
sunos_so_ops.open_symbol_file_object = open_symbol_file_object;
sunos_so_ops.in_dynsym_resolve_code = sunos_in_dynsym_resolve_code;
+ sunos_so_ops.bfd_open = solib_bfd_open;
- /* FIXME: Don't do this here. *_gdbarch_init() should set so_ops. */
+ /* FIXME: Don't do this here. *_gdbarch_init() should set so_ops. */
current_target_so_ops = &sunos_so_ops;
}