/* Handle SVR4 shared libraries for GDB, the GNU Debugger.
- Copyright (C) 1990-1996, 1998-2001, 2003-2012 Free Software
- Foundation, Inc.
+ Copyright (C) 1990-2018 Free Software Foundation, Inc.
This file is part of GDB.
#include "gdbcore.h"
#include "target.h"
#include "inferior.h"
+#include "infrun.h"
#include "regcache.h"
#include "gdbthread.h"
-#include "observer.h"
-
-#include "gdb_assert.h"
+#include "observable.h"
#include "solist.h"
#include "solib.h"
#include "elf-bfd.h"
#include "exec.h"
#include "auxv.h"
-#include "exceptions.h"
#include "gdb_bfd.h"
+#include "probe.h"
static struct link_map_offsets *svr4_fetch_link_map_offsets (void);
static int svr4_have_link_map_offsets (void);
static void svr4_relocate_main_executable (void);
-
-/* Link map info to include in an allocated so_list entry. */
-
-struct lm_info
- {
- /* Amount by which addresses in the binary should be relocated to
- match the inferior. The direct inferior value is L_ADDR_INFERIOR.
- When prelinking is involved and the prelink base address changes,
- we may need a different offset - the recomputed offset is in L_ADDR.
- It is commonly the same value. It is cached as we want to warn about
- the difference and compute it only once. L_ADDR is valid
- iff L_ADDR_P. */
- CORE_ADDR l_addr, l_addr_inferior;
- unsigned int l_addr_p : 1;
-
- /* The target location of lm. */
- CORE_ADDR lm_addr;
-
- /* Values read in from inferior's fields of the same name. */
- CORE_ADDR l_ld, l_next, l_prev, l_name;
- };
+static void svr4_free_library_list (void *p_list);
/* On SVR4 systems, a list of symbols in the dynamic linker where
GDB can try to place a breakpoint to monitor shared library
NULL
};
+/* What to do when a probe stop occurs. */
+
+enum probe_action
+{
+ /* Something went seriously wrong. Stop using probes and
+ revert to using the older interface. */
+ PROBES_INTERFACE_FAILED,
+
+ /* No action is required. The shared object list is still
+ valid. */
+ DO_NOTHING,
+
+ /* The shared object list should be reloaded entirely. */
+ FULL_RELOAD,
+
+ /* Attempt to incrementally update the shared object list. If
+ the update fails or is not possible, fall back to reloading
+ the list in full. */
+ UPDATE_OR_RELOAD,
+};
+
+/* A probe's name and its associated action. */
+
+struct probe_info
+{
+ /* The name of the probe. */
+ const char *name;
+
+ /* What to do when a probe stop occurs. */
+ enum probe_action action;
+};
+
+/* A list of named probes and their associated actions. If all
+ probes are present in the dynamic linker then the probes-based
+ interface will be used. */
+
+static const struct probe_info probe_info[] =
+{
+ { "init_start", DO_NOTHING },
+ { "init_complete", FULL_RELOAD },
+ { "map_start", DO_NOTHING },
+ { "map_failed", DO_NOTHING },
+ { "reloc_complete", UPDATE_OR_RELOAD },
+ { "unmap_start", DO_NOTHING },
+ { "unmap_complete", FULL_RELOAD },
+};
+
+#define NUM_PROBES ARRAY_SIZE (probe_info)
+
/* Return non-zero if GDB_SO_NAME and INFERIOR_SO_NAME represent
the same shared library. */
return (svr4_same_1 (gdb->so_original_name, inferior->so_original_name));
}
-static struct lm_info *
+static lm_info_svr4 *
lm_info_read (CORE_ADDR lm_addr)
{
struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
gdb_byte *lm;
- struct lm_info *lm_info;
+ lm_info_svr4 *lm_info;
struct cleanup *back_to;
- lm = xmalloc (lmo->link_map_size);
+ lm = (gdb_byte *) xmalloc (lmo->link_map_size);
back_to = make_cleanup (xfree, lm);
if (target_read_memory (lm_addr, lm, lmo->link_map_size) != 0)
{
struct type *ptr_type = builtin_type (target_gdbarch ())->builtin_data_ptr;
- lm_info = xzalloc (sizeof (*lm_info));
+ lm_info = new lm_info_svr4;
lm_info->lm_addr = lm_addr;
lm_info->l_addr_inferior = extract_typed_address (&lm[lmo->l_addr_offset],
}
static CORE_ADDR
-lm_addr_check (struct so_list *so, bfd *abfd)
+lm_addr_check (const struct so_list *so, bfd *abfd)
{
- if (!so->lm_info->l_addr_p)
+ lm_info_svr4 *li = (lm_info_svr4 *) so->lm_info;
+
+ if (!li->l_addr_p)
{
struct bfd_section *dyninfo_sect;
CORE_ADDR l_addr, l_dynaddr, dynaddr;
- l_addr = so->lm_info->l_addr_inferior;
+ l_addr = li->l_addr_inferior;
if (! abfd || ! has_lm_dynamic_from_link_map ())
goto set_addr;
- l_dynaddr = so->lm_info->l_ld;
+ l_dynaddr = li->l_ld;
dyninfo_sect = bfd_get_section_by_name (abfd, ".dynamic");
if (dyninfo_sect == NULL)
}
set_addr:
- so->lm_info->l_addr = l_addr;
- so->lm_info->l_addr_p = 1;
+ li->l_addr = l_addr;
+ li->l_addr_p = 1;
}
- return so->lm_info->l_addr;
+ return li->l_addr;
}
/* Per pspace SVR4 specific data. */
CORE_ADDR interp_text_sect_high;
CORE_ADDR interp_plt_sect_low;
CORE_ADDR interp_plt_sect_high;
+
+ /* Nonzero if the list of objects was last obtained from the target
+ via qXfer:libraries-svr4:read. */
+ int using_xfer;
+
+ /* Table of struct probe_and_action instances, used by the
+ probes-based interface to map breakpoint addresses to probes
+ and their associated actions. Lookup is performed using
+ probe_and_action->prob->address. */
+ htab_t probes_table;
+
+ /* List of objects loaded into the inferior, used by the probes-
+ based interface. */
+ struct so_list *solib_list;
};
/* Per-program-space data key. */
static const struct program_space_data *solib_svr4_pspace_data;
+/* Free the probes table. */
+
+static void
+free_probes_table (struct svr4_info *info)
+{
+ if (info->probes_table == NULL)
+ return;
+
+ htab_delete (info->probes_table);
+ info->probes_table = NULL;
+}
+
+/* Free the solib list. */
+
+static void
+free_solib_list (struct svr4_info *info)
+{
+ svr4_free_library_list (&info->solib_list);
+ info->solib_list = NULL;
+}
+
static void
svr4_pspace_data_cleanup (struct program_space *pspace, void *arg)
{
- struct svr4_info *info;
+ struct svr4_info *info = (struct svr4_info *) arg;
+
+ free_probes_table (info);
+ free_solib_list (info);
- info = program_space_data (pspace, solib_svr4_pspace_data);
xfree (info);
}
{
struct svr4_info *info;
- info = program_space_data (current_program_space, solib_svr4_pspace_data);
+ info = (struct svr4_info *) program_space_data (current_program_space,
+ solib_svr4_pspace_data);
if (info != NULL)
return info;
- info = XZALLOC (struct svr4_info);
+ info = XCNEW (struct svr4_info);
set_program_space_data (current_program_space, solib_svr4_pspace_data, info);
return info;
}
Return a pointer to allocated memory holding the program header contents,
or NULL on failure. If sucessful, and unless P_SECT_SIZE is NULL, the
size of those contents is returned to P_SECT_SIZE. Likewise, the target
- architecture size (32-bit or 64-bit) is returned to P_ARCH_SIZE. */
+ architecture size (32-bit or 64-bit) is returned to P_ARCH_SIZE and
+ the base address of the section is returned in BASE_ADDR. */
static gdb_byte *
-read_program_header (int type, int *p_sect_size, int *p_arch_size)
+read_program_header (int type, int *p_sect_size, int *p_arch_size,
+ CORE_ADDR *base_addr)
{
enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
CORE_ADDR at_phdr, at_phent, at_phnum, pt_phdr = 0;
}
/* Read in requested program header. */
- buf = xmalloc (sect_size);
+ buf = (gdb_byte *) xmalloc (sect_size);
if (target_read_memory (sect_addr, buf, sect_size))
{
xfree (buf);
*p_arch_size = arch_size;
if (p_sect_size)
*p_sect_size = sect_size;
+ if (base_addr)
+ *base_addr = sect_addr;
return buf;
}
/* Return program interpreter string. */
-static gdb_byte *
+static char *
find_program_interpreter (void)
{
gdb_byte *buf = NULL;
{
int sect_size = bfd_section_size (exec_bfd, interp_sect);
- buf = xmalloc (sect_size);
+ buf = (gdb_byte *) xmalloc (sect_size);
bfd_get_section_contents (exec_bfd, interp_sect, buf, 0, sect_size);
}
}
/* If we didn't find it, use the target auxillary vector. */
if (!buf)
- buf = read_program_header (PT_INTERP, NULL, NULL);
+ buf = read_program_header (PT_INTERP, NULL, NULL, NULL);
- return buf;
+ return (char *) buf;
}
-/* Scan for DYNTAG in .dynamic section of ABFD. If DYNTAG is found 1 is
- returned and the corresponding PTR is set. */
+/* Scan for DESIRED_DYNTAG in .dynamic section of ABFD. If DESIRED_DYNTAG is
+ found, 1 is returned and the corresponding PTR is set. */
static int
-scan_dyntag (int dyntag, bfd *abfd, CORE_ADDR *ptr)
+scan_dyntag (const int desired_dyntag, bfd *abfd, CORE_ADDR *ptr,
+ CORE_ADDR *ptr_addr)
{
int arch_size, step, sect_size;
- long dyn_tag;
+ long current_dyntag;
CORE_ADDR dyn_ptr, dyn_addr;
gdb_byte *bufend, *bufstart, *buf;
Elf32_External_Dyn *x_dynp_32;
/* Read in .dynamic from the BFD. We will get the actual value
from memory later. */
sect_size = bfd_section_size (abfd, sect);
- buf = bufstart = alloca (sect_size);
+ buf = bufstart = (gdb_byte *) alloca (sect_size);
if (!bfd_get_section_contents (abfd, sect,
buf, 0, sect_size))
return 0;
if (arch_size == 32)
{
x_dynp_32 = (Elf32_External_Dyn *) buf;
- dyn_tag = bfd_h_get_32 (abfd, (bfd_byte *) x_dynp_32->d_tag);
+ current_dyntag = bfd_h_get_32 (abfd, (bfd_byte *) x_dynp_32->d_tag);
dyn_ptr = bfd_h_get_32 (abfd, (bfd_byte *) x_dynp_32->d_un.d_ptr);
}
else
{
x_dynp_64 = (Elf64_External_Dyn *) buf;
- dyn_tag = bfd_h_get_64 (abfd, (bfd_byte *) x_dynp_64->d_tag);
+ current_dyntag = bfd_h_get_64 (abfd, (bfd_byte *) x_dynp_64->d_tag);
dyn_ptr = bfd_h_get_64 (abfd, (bfd_byte *) x_dynp_64->d_un.d_ptr);
}
- if (dyn_tag == DT_NULL)
+ if (current_dyntag == DT_NULL)
return 0;
- if (dyn_tag == dyntag)
+ if (current_dyntag == desired_dyntag)
{
/* If requested, try to read the runtime value of this .dynamic
entry. */
{
struct type *ptr_type;
gdb_byte ptr_buf[8];
- CORE_ADDR ptr_addr;
+ CORE_ADDR ptr_addr_1;
ptr_type = builtin_type (target_gdbarch ())->builtin_data_ptr;
- ptr_addr = dyn_addr + (buf - bufstart) + arch_size / 8;
- if (target_read_memory (ptr_addr, ptr_buf, arch_size / 8) == 0)
+ ptr_addr_1 = dyn_addr + (buf - bufstart) + arch_size / 8;
+ if (target_read_memory (ptr_addr_1, ptr_buf, arch_size / 8) == 0)
dyn_ptr = extract_typed_address (ptr_buf, ptr_type);
*ptr = dyn_ptr;
+ if (ptr_addr)
+ *ptr_addr = dyn_addr + (buf - bufstart);
}
return 1;
}
return 0;
}
-/* Scan for DYNTAG in .dynamic section of the target's main executable,
- found by consulting the OS auxillary vector. If DYNTAG is found 1 is
- returned and the corresponding PTR is set. */
+/* Scan for DESIRED_DYNTAG in .dynamic section of the target's main executable,
+ found by consulting the OS auxillary vector. If DESIRED_DYNTAG is found, 1
+ is returned and the corresponding PTR is set. */
static int
-scan_dyntag_auxv (int dyntag, CORE_ADDR *ptr)
+scan_dyntag_auxv (const int desired_dyntag, CORE_ADDR *ptr,
+ CORE_ADDR *ptr_addr)
{
enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
int sect_size, arch_size, step;
- long dyn_tag;
+ long current_dyntag;
CORE_ADDR dyn_ptr;
+ CORE_ADDR base_addr;
gdb_byte *bufend, *bufstart, *buf;
/* Read in .dynamic section. */
- buf = bufstart = read_program_header (PT_DYNAMIC, §_size, &arch_size);
+ buf = bufstart = read_program_header (PT_DYNAMIC, §_size, &arch_size,
+ &base_addr);
if (!buf)
return 0;
{
Elf32_External_Dyn *dynp = (Elf32_External_Dyn *) buf;
- dyn_tag = extract_unsigned_integer ((gdb_byte *) dynp->d_tag,
+ current_dyntag = extract_unsigned_integer ((gdb_byte *) dynp->d_tag,
4, byte_order);
dyn_ptr = extract_unsigned_integer ((gdb_byte *) dynp->d_un.d_ptr,
4, byte_order);
{
Elf64_External_Dyn *dynp = (Elf64_External_Dyn *) buf;
- dyn_tag = extract_unsigned_integer ((gdb_byte *) dynp->d_tag,
+ current_dyntag = extract_unsigned_integer ((gdb_byte *) dynp->d_tag,
8, byte_order);
dyn_ptr = extract_unsigned_integer ((gdb_byte *) dynp->d_un.d_ptr,
8, byte_order);
}
- if (dyn_tag == DT_NULL)
+ if (current_dyntag == DT_NULL)
break;
- if (dyn_tag == dyntag)
+ if (current_dyntag == desired_dyntag)
{
if (ptr)
*ptr = dyn_ptr;
+ if (ptr_addr)
+ *ptr_addr = base_addr + buf - bufstart;
+
xfree (bufstart);
return 1;
}
static CORE_ADDR
elf_locate_base (void)
{
- struct minimal_symbol *msymbol;
- CORE_ADDR dyn_ptr;
+ struct bound_minimal_symbol msymbol;
+ CORE_ADDR dyn_ptr, dyn_ptr_addr;
/* Look for DT_MIPS_RLD_MAP first. MIPS executables use this
instead of DT_DEBUG, although they sometimes contain an unused
DT_DEBUG. */
- if (scan_dyntag (DT_MIPS_RLD_MAP, exec_bfd, &dyn_ptr)
- || scan_dyntag_auxv (DT_MIPS_RLD_MAP, &dyn_ptr))
+ if (scan_dyntag (DT_MIPS_RLD_MAP, exec_bfd, &dyn_ptr, NULL)
+ || scan_dyntag_auxv (DT_MIPS_RLD_MAP, &dyn_ptr, NULL))
{
struct type *ptr_type = builtin_type (target_gdbarch ())->builtin_data_ptr;
gdb_byte *pbuf;
int pbuf_size = TYPE_LENGTH (ptr_type);
- pbuf = alloca (pbuf_size);
+ pbuf = (gdb_byte *) alloca (pbuf_size);
/* DT_MIPS_RLD_MAP contains a pointer to the address
of the dynamic link structure. */
if (target_read_memory (dyn_ptr, pbuf, pbuf_size))
return extract_typed_address (pbuf, ptr_type);
}
+ /* Then check DT_MIPS_RLD_MAP_REL. MIPS executables now use this form
+ because of needing to support PIE. DT_MIPS_RLD_MAP will also exist
+ in non-PIE. */
+ if (scan_dyntag (DT_MIPS_RLD_MAP_REL, exec_bfd, &dyn_ptr, &dyn_ptr_addr)
+ || scan_dyntag_auxv (DT_MIPS_RLD_MAP_REL, &dyn_ptr, &dyn_ptr_addr))
+ {
+ struct type *ptr_type = builtin_type (target_gdbarch ())->builtin_data_ptr;
+ gdb_byte *pbuf;
+ int pbuf_size = TYPE_LENGTH (ptr_type);
+
+ pbuf = (gdb_byte *) alloca (pbuf_size);
+ /* DT_MIPS_RLD_MAP_REL contains an offset from the address of the
+ DT slot to the address of the dynamic link structure. */
+ if (target_read_memory (dyn_ptr + dyn_ptr_addr, pbuf, pbuf_size))
+ return 0;
+ return extract_typed_address (pbuf, ptr_type);
+ }
+
/* Find DT_DEBUG. */
- if (scan_dyntag (DT_DEBUG, exec_bfd, &dyn_ptr)
- || scan_dyntag_auxv (DT_DEBUG, &dyn_ptr))
+ if (scan_dyntag (DT_DEBUG, exec_bfd, &dyn_ptr, NULL)
+ || scan_dyntag_auxv (DT_DEBUG, &dyn_ptr, NULL))
return dyn_ptr;
/* This may be a static executable. Look for the symbol
conventionally named _r_debug, as a last resort. */
msymbol = lookup_minimal_symbol ("_r_debug", NULL, symfile_objfile);
- if (msymbol != NULL)
- return SYMBOL_VALUE_ADDRESS (msymbol);
+ if (msymbol.minsym != NULL)
+ return BMSYMBOL_VALUE_ADDRESS (msymbol);
/* DT_DEBUG entry not found. */
return 0;
struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
struct type *ptr_type = builtin_type (target_gdbarch ())->builtin_data_ptr;
CORE_ADDR addr = 0;
- volatile struct gdb_exception ex;
- TRY_CATCH (ex, RETURN_MASK_ERROR)
+ TRY
{
addr = read_memory_typed_address (info->debug_base + lmo->r_map_offset,
ptr_type);
}
- exception_print (gdb_stderr, ex);
+ CATCH (ex, RETURN_MASK_ERROR)
+ {
+ exception_print (gdb_stderr, ex);
+ }
+ END_CATCH
+
return addr;
}
struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
struct type *ptr_type = builtin_type (target_gdbarch ())->builtin_data_ptr;
enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
- ULONGEST version;
+ ULONGEST version = 0;
+
+ TRY
+ {
+ /* Check version, and return zero if `struct r_debug' doesn't have
+ the r_ldsomap member. */
+ version
+ = read_memory_unsigned_integer (info->debug_base + lmo->r_version_offset,
+ lmo->r_version_size, byte_order);
+ }
+ CATCH (ex, RETURN_MASK_ERROR)
+ {
+ exception_print (gdb_stderr, ex);
+ }
+ END_CATCH
- /* Check version, and return zero if `struct r_debug' doesn't have
- the r_ldsomap member. */
- version
- = read_memory_unsigned_integer (info->debug_base + lmo->r_version_offset,
- lmo->r_version_size, byte_order);
if (version < 2 || lmo->r_ldsomap_offset == -1)
return 0;
{
struct svr4_info *info;
CORE_ADDR ldsomap;
- struct so_list *new;
+ struct so_list *newobj;
struct cleanup *old_chain;
- struct link_map_offsets *lmo;
CORE_ADDR name_lm;
info = get_svr4_info ();
if (!ldsomap)
return 0;
- lmo = svr4_fetch_link_map_offsets ();
- new = XZALLOC (struct so_list);
- old_chain = make_cleanup (xfree, new);
- new->lm_info = lm_info_read (ldsomap);
- make_cleanup (xfree, new->lm_info);
- name_lm = new->lm_info ? new->lm_info->l_name : 0;
+ newobj = XCNEW (struct so_list);
+ old_chain = make_cleanup (xfree, newobj);
+ lm_info_svr4 *li = lm_info_read (ldsomap);
+ newobj->lm_info = li;
+ make_cleanup (xfree, newobj->lm_info);
+ name_lm = li != NULL ? li->l_name : 0;
do_cleanups (old_chain);
return (name_lm >= vaddr && name_lm < vaddr + size);
}
-/* Implement the "open_symbol_file_object" target_so_ops method.
-
- If no open symbol file, attempt to locate and open the main symbol
- file. On SVR4 systems, this is the first link map entry. If its
- name is here, we can open it. Useful when attaching to a process
- without first loading its symbol file. */
+/* See solist.h. */
static int
-open_symbol_file_object (void *from_ttyp)
+open_symbol_file_object (int from_tty)
{
CORE_ADDR lm, l_name;
char *filename;
int errcode;
- int from_tty = *(int *)from_ttyp;
struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
struct type *ptr_type = builtin_type (target_gdbarch ())->builtin_data_ptr;
int l_name_size = TYPE_LENGTH (ptr_type);
- gdb_byte *l_name_buf = xmalloc (l_name_size);
+ gdb_byte *l_name_buf = (gdb_byte *) xmalloc (l_name_size);
struct cleanup *cleanups = make_cleanup (xfree, l_name_buf);
struct svr4_info *info = get_svr4_info ();
+ symfile_add_flags add_flags = 0;
+
+ if (from_tty)
+ add_flags |= SYMFILE_VERBOSE;
if (symfile_objfile)
if (!query (_("Attempt to reload symbols from process? ")))
}
/* Have a pathname: read the symbol file. */
- symbol_file_add_main (filename, from_tty);
+ symbol_file_add_main (filename, add_flags);
do_cleanups (cleanups);
return 1;
static void
svr4_free_so (struct so_list *so)
{
- xfree (so->lm_info);
+ lm_info_svr4 *li = (lm_info_svr4 *) so->lm_info;
+
+ delete li;
+}
+
+/* Implement target_so_ops.clear_so. */
+
+static void
+svr4_clear_so (struct so_list *so)
+{
+ lm_info_svr4 *li = (lm_info_svr4 *) so->lm_info;
+
+ if (li != NULL)
+ li->l_addr_p = 0;
}
/* Free so_list built so far (called via cleanup). */
}
}
+/* Copy library list. */
+
+static struct so_list *
+svr4_copy_library_list (struct so_list *src)
+{
+ struct so_list *dst = NULL;
+ struct so_list **link = &dst;
+
+ while (src != NULL)
+ {
+ struct so_list *newobj;
+
+ newobj = XNEW (struct so_list);
+ memcpy (newobj, src, sizeof (struct so_list));
+
+ lm_info_svr4 *src_li = (lm_info_svr4 *) src->lm_info;
+ newobj->lm_info = new lm_info_svr4 (*src_li);
+
+ newobj->next = NULL;
+ *link = newobj;
+ link = &newobj->next;
+
+ src = src->next;
+ }
+
+ return dst;
+}
+
#ifdef HAVE_LIBEXPAT
#include "xml-support.h"
static void
library_list_start_library (struct gdb_xml_parser *parser,
const struct gdb_xml_element *element,
- void *user_data, VEC(gdb_xml_value_s) *attributes)
+ void *user_data,
+ std::vector<gdb_xml_value> &attributes)
{
- struct svr4_library_list *list = user_data;
- const char *name = xml_find_attribute (attributes, "name")->value;
- ULONGEST *lmp = xml_find_attribute (attributes, "lm")->value;
- ULONGEST *l_addrp = xml_find_attribute (attributes, "l_addr")->value;
- ULONGEST *l_ldp = xml_find_attribute (attributes, "l_ld")->value;
+ struct svr4_library_list *list = (struct svr4_library_list *) user_data;
+ const char *name
+ = (const char *) xml_find_attribute (attributes, "name")->value.get ();
+ ULONGEST *lmp
+ = (ULONGEST *) xml_find_attribute (attributes, "lm")->value.get ();
+ ULONGEST *l_addrp
+ = (ULONGEST *) xml_find_attribute (attributes, "l_addr")->value.get ();
+ ULONGEST *l_ldp
+ = (ULONGEST *) xml_find_attribute (attributes, "l_ld")->value.get ();
struct so_list *new_elem;
- new_elem = XZALLOC (struct so_list);
- new_elem->lm_info = XZALLOC (struct lm_info);
- new_elem->lm_info->lm_addr = *lmp;
- new_elem->lm_info->l_addr_inferior = *l_addrp;
- new_elem->lm_info->l_ld = *l_ldp;
+ new_elem = XCNEW (struct so_list);
+ lm_info_svr4 *li = new lm_info_svr4;
+ new_elem->lm_info = li;
+ li->lm_addr = *lmp;
+ li->l_addr_inferior = *l_addrp;
+ li->l_ld = *l_ldp;
strncpy (new_elem->so_name, name, sizeof (new_elem->so_name) - 1);
new_elem->so_name[sizeof (new_elem->so_name) - 1] = 0;
static void
svr4_library_list_start_list (struct gdb_xml_parser *parser,
const struct gdb_xml_element *element,
- void *user_data, VEC(gdb_xml_value_s) *attributes)
+ void *user_data,
+ std::vector<gdb_xml_value> &attributes)
{
- struct svr4_library_list *list = user_data;
- const char *version = xml_find_attribute (attributes, "version")->value;
+ struct svr4_library_list *list = (struct svr4_library_list *) user_data;
+ const char *version
+ = (const char *) xml_find_attribute (attributes, "version")->value.get ();
struct gdb_xml_value *main_lm = xml_find_attribute (attributes, "main-lm");
if (strcmp (version, "1.0") != 0)
version);
if (main_lm)
- list->main_lm = *(ULONGEST *) main_lm->value;
+ list->main_lm = *(ULONGEST *) main_lm->value.get ();
}
/* The allowed elements and attributes for an XML library list.
memset (list, 0, sizeof (*list));
list->tailp = &list->head;
- if (gdb_xml_parse_quick (_("target library list"), "library-list.dtd",
+ if (gdb_xml_parse_quick (_("target library list"), "library-list-svr4.dtd",
svr4_library_list_elements, document, list) == 0)
{
/* Parsed successfully, keep the result. */
return 0;
}
-/* Attempt to get so_list from target via qXfer:libraries:read packet.
+/* Attempt to get so_list from target via qXfer:libraries-svr4:read packet.
Return 0 if packet not supported, *SO_LIST_RETURN is not modified in such
case. Return 1 if *SO_LIST_RETURN contains the library list, it may be
- empty, caller is responsible for freeing all its entries. */
+ empty, caller is responsible for freeing all its entries.
+
+ Note that ANNEX must be NULL if the remote does not explicitly allow
+ qXfer:libraries-svr4:read packets with non-empty annexes. Support for
+ this can be checked using target_augmented_libraries_svr4_read (). */
static int
-svr4_current_sos_via_xfer_libraries (struct svr4_library_list *list)
+svr4_current_sos_via_xfer_libraries (struct svr4_library_list *list,
+ const char *annex)
{
- char *svr4_library_document;
- int result;
- struct cleanup *back_to;
+ gdb_assert (annex == NULL || target_augmented_libraries_svr4_read ());
/* Fetch the list of shared libraries. */
- svr4_library_document = target_read_stralloc (¤t_target,
- TARGET_OBJECT_LIBRARIES_SVR4,
- NULL);
+ gdb::unique_xmalloc_ptr<char> svr4_library_document
+ = target_read_stralloc (¤t_target, TARGET_OBJECT_LIBRARIES_SVR4,
+ annex);
if (svr4_library_document == NULL)
return 0;
- back_to = make_cleanup (xfree, svr4_library_document);
- result = svr4_parse_libraries (svr4_library_document, list);
- do_cleanups (back_to);
-
- return result;
+ return svr4_parse_libraries (svr4_library_document.get (), list);
}
#else
static int
-svr4_current_sos_via_xfer_libraries (struct svr4_library_list *list)
+svr4_current_sos_via_xfer_libraries (struct svr4_library_list *list,
+ const char *annex)
{
return 0;
}
svr4_default_sos (void)
{
struct svr4_info *info = get_svr4_info ();
- struct so_list *new;
+ struct so_list *newobj;
if (!info->debug_loader_offset_p)
return NULL;
- new = XZALLOC (struct so_list);
-
- new->lm_info = xzalloc (sizeof (struct lm_info));
+ newobj = XCNEW (struct so_list);
+ lm_info_svr4 *li = new lm_info_svr4;
+ newobj->lm_info = li;
/* Nothing will ever check the other fields if we set l_addr_p. */
- new->lm_info->l_addr = info->debug_loader_offset;
- new->lm_info->l_addr_p = 1;
+ li->l_addr = info->debug_loader_offset;
+ li->l_addr_p = 1;
- strncpy (new->so_name, info->debug_loader_name, SO_NAME_MAX_PATH_SIZE - 1);
- new->so_name[SO_NAME_MAX_PATH_SIZE - 1] = '\0';
- strcpy (new->so_original_name, new->so_name);
+ strncpy (newobj->so_name, info->debug_loader_name, SO_NAME_MAX_PATH_SIZE - 1);
+ newobj->so_name[SO_NAME_MAX_PATH_SIZE - 1] = '\0';
+ strcpy (newobj->so_original_name, newobj->so_name);
- return new;
+ return newobj;
}
-/* Read the whole inferior libraries chain starting at address LM. Add the
- entries to the tail referenced by LINK_PTR_PTR. Ignore the first entry if
- IGNORE_FIRST and set global MAIN_LM_ADDR according to it. */
+/* Read the whole inferior libraries chain starting at address LM.
+ Expect the first entry in the chain's previous entry to be PREV_LM.
+ Add the entries to the tail referenced by LINK_PTR_PTR. Ignore the
+ first entry if IGNORE_FIRST and set global MAIN_LM_ADDR according
+ to it. Returns nonzero upon success. If zero is returned the
+ entries stored to LINK_PTR_PTR are still valid although they may
+ represent only part of the inferior library list. */
-static void
-svr4_read_so_list (CORE_ADDR lm, struct so_list ***link_ptr_ptr,
- int ignore_first)
+static int
+svr4_read_so_list (CORE_ADDR lm, CORE_ADDR prev_lm,
+ struct so_list ***link_ptr_ptr, int ignore_first)
{
- CORE_ADDR prev_lm = 0, next_lm;
+ CORE_ADDR first_l_name = 0;
+ CORE_ADDR next_lm;
for (; lm != 0; prev_lm = lm, lm = next_lm)
{
- struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
- struct so_list *new;
- struct cleanup *old_chain;
int errcode;
char *buffer;
- new = XZALLOC (struct so_list);
- old_chain = make_cleanup_free_so (new);
+ so_list_up newobj (XCNEW (struct so_list));
- new->lm_info = lm_info_read (lm);
- if (new->lm_info == NULL)
- {
- do_cleanups (old_chain);
- break;
- }
+ lm_info_svr4 *li = lm_info_read (lm);
+ newobj->lm_info = li;
+ if (li == NULL)
+ return 0;
- next_lm = new->lm_info->l_next;
+ next_lm = li->l_next;
- if (new->lm_info->l_prev != prev_lm)
+ if (li->l_prev != prev_lm)
{
warning (_("Corrupted shared library list: %s != %s"),
paddress (target_gdbarch (), prev_lm),
- paddress (target_gdbarch (), new->lm_info->l_prev));
- do_cleanups (old_chain);
- break;
+ paddress (target_gdbarch (), li->l_prev));
+ return 0;
}
/* For SVR4 versions, the first entry in the link map is for the
SVR4, it has no name. For others (Solaris 2.3 for example), it
does have a name, so we can no longer use a missing name to
decide when to ignore it. */
- if (ignore_first && new->lm_info->l_prev == 0)
+ if (ignore_first && li->l_prev == 0)
{
struct svr4_info *info = get_svr4_info ();
- info->main_lm_addr = new->lm_info->lm_addr;
- do_cleanups (old_chain);
+ first_l_name = li->l_name;
+ info->main_lm_addr = li->lm_addr;
continue;
}
/* Extract this shared object's name. */
- target_read_string (new->lm_info->l_name, &buffer,
- SO_NAME_MAX_PATH_SIZE - 1, &errcode);
+ target_read_string (li->l_name, &buffer, SO_NAME_MAX_PATH_SIZE - 1,
+ &errcode);
if (errcode != 0)
{
- warning (_("Can't read pathname for load map: %s."),
- safe_strerror (errcode));
- do_cleanups (old_chain);
+ /* If this entry's l_name address matches that of the
+ inferior executable, then this is not a normal shared
+ object, but (most likely) a vDSO. In this case, silently
+ skip it; otherwise emit a warning. */
+ if (first_l_name == 0 || li->l_name != first_l_name)
+ warning (_("Can't read pathname for load map: %s."),
+ safe_strerror (errcode));
continue;
}
- strncpy (new->so_name, buffer, SO_NAME_MAX_PATH_SIZE - 1);
- new->so_name[SO_NAME_MAX_PATH_SIZE - 1] = '\0';
- strcpy (new->so_original_name, new->so_name);
+ strncpy (newobj->so_name, buffer, SO_NAME_MAX_PATH_SIZE - 1);
+ newobj->so_name[SO_NAME_MAX_PATH_SIZE - 1] = '\0';
+ strcpy (newobj->so_original_name, newobj->so_name);
xfree (buffer);
/* If this entry has no name, or its name matches the name
for the main executable, don't include it in the list. */
- if (! new->so_name[0] || match_main (new->so_name))
- {
- do_cleanups (old_chain);
- continue;
- }
+ if (! newobj->so_name[0] || match_main (newobj->so_name))
+ continue;
- discard_cleanups (old_chain);
- new->next = 0;
- **link_ptr_ptr = new;
- *link_ptr_ptr = &new->next;
+ newobj->next = 0;
+ /* Don't free it now. */
+ **link_ptr_ptr = newobj.release ();
+ *link_ptr_ptr = &(**link_ptr_ptr)->next;
}
+
+ return 1;
}
-/* Implement the "current_sos" target_so_ops method. */
+/* Read the full list of currently loaded shared objects directly
+ from the inferior, without referring to any libraries read and
+ stored by the probes interface. Handle special cases relating
+ to the first elements of the list. */
static struct so_list *
-svr4_current_sos (void)
+svr4_current_sos_direct (struct svr4_info *info)
{
CORE_ADDR lm;
struct so_list *head = NULL;
struct so_list **link_ptr = &head;
- struct svr4_info *info;
struct cleanup *back_to;
int ignore_first;
struct svr4_library_list library_list;
Unfortunately statically linked inferiors will also fall back through this
suboptimal code path. */
- if (svr4_current_sos_via_xfer_libraries (&library_list))
+ info->using_xfer = svr4_current_sos_via_xfer_libraries (&library_list,
+ NULL);
+ if (info->using_xfer)
{
if (library_list.main_lm)
- {
- info = get_svr4_info ();
- info->main_lm_addr = library_list.main_lm;
- }
+ info->main_lm_addr = library_list.main_lm;
return library_list.head ? library_list.head : svr4_default_sos ();
}
- info = get_svr4_info ();
-
/* Always locate the debug struct, in case it has moved. */
info->debug_base = 0;
locate_base (info);
`struct so_list' nodes. */
lm = solib_svr4_r_map (info);
if (lm)
- svr4_read_so_list (lm, &link_ptr, ignore_first);
+ svr4_read_so_list (lm, 0, &link_ptr, ignore_first);
/* On Solaris, the dynamic linker is not in the normal list of
shared objects, so make sure we pick it up too. Having
for skipping dynamic linker resolver code. */
lm = solib_svr4_r_ldsomap (info);
if (lm)
- svr4_read_so_list (lm, &link_ptr, 0);
+ svr4_read_so_list (lm, 0, &link_ptr, 0);
discard_cleanups (back_to);
return head;
}
+/* Implement the main part of the "current_sos" target_so_ops
+ method. */
+
+static struct so_list *
+svr4_current_sos_1 (void)
+{
+ struct svr4_info *info = get_svr4_info ();
+
+ /* If the solib list has been read and stored by the probes
+ interface then we return a copy of the stored list. */
+ if (info->solib_list != NULL)
+ return svr4_copy_library_list (info->solib_list);
+
+ /* Otherwise obtain the solib list directly from the inferior. */
+ return svr4_current_sos_direct (info);
+}
+
+/* Implement the "current_sos" target_so_ops method. */
+
+static struct so_list *
+svr4_current_sos (void)
+{
+ struct so_list *so_head = svr4_current_sos_1 ();
+ struct mem_range vsyscall_range;
+
+ /* Filter out the vDSO module, if present. Its symbol file would
+ not be found on disk. The vDSO/vsyscall's OBJFILE is instead
+ managed by symfile-mem.c:add_vsyscall_page. */
+ if (gdbarch_vsyscall_range (target_gdbarch (), &vsyscall_range)
+ && vsyscall_range.length != 0)
+ {
+ struct so_list **sop;
+
+ sop = &so_head;
+ while (*sop != NULL)
+ {
+ struct so_list *so = *sop;
+
+ /* We can't simply match the vDSO by starting address alone,
+ because lm_info->l_addr_inferior (and also l_addr) do not
+ necessarily represent the real starting address of the
+ ELF if the vDSO's ELF itself is "prelinked". The l_ld
+ field (the ".dynamic" section of the shared object)
+ always points at the absolute/resolved address though.
+ So check whether that address is inside the vDSO's
+ mapping instead.
+
+ E.g., on Linux 3.16 (x86_64) the vDSO is a regular
+ 0-based ELF, and we see:
+
+ (gdb) info auxv
+ 33 AT_SYSINFO_EHDR System-supplied DSO's ELF header 0x7ffff7ffb000
+ (gdb) p/x *_r_debug.r_map.l_next
+ $1 = {l_addr = 0x7ffff7ffb000, ..., l_ld = 0x7ffff7ffb318, ...}
+
+ And on Linux 2.6.32 (x86_64) we see:
+
+ (gdb) info auxv
+ 33 AT_SYSINFO_EHDR System-supplied DSO's ELF header 0x7ffff7ffe000
+ (gdb) p/x *_r_debug.r_map.l_next
+ $5 = {l_addr = 0x7ffff88fe000, ..., l_ld = 0x7ffff7ffe580, ... }
+
+ Dumping that vDSO shows:
+
+ (gdb) info proc mappings
+ 0x7ffff7ffe000 0x7ffff7fff000 0x1000 0 [vdso]
+ (gdb) dump memory vdso.bin 0x7ffff7ffe000 0x7ffff7fff000
+ # readelf -Wa vdso.bin
+ [...]
+ Entry point address: 0xffffffffff700700
+ [...]
+ Section Headers:
+ [Nr] Name Type Address Off Size
+ [ 0] NULL 0000000000000000 000000 000000
+ [ 1] .hash HASH ffffffffff700120 000120 000038
+ [ 2] .dynsym DYNSYM ffffffffff700158 000158 0000d8
+ [...]
+ [ 9] .dynamic DYNAMIC ffffffffff700580 000580 0000f0
+ */
+
+ lm_info_svr4 *li = (lm_info_svr4 *) so->lm_info;
+
+ if (address_in_mem_range (li->l_ld, &vsyscall_range))
+ {
+ *sop = so->next;
+ free_so (so);
+ break;
+ }
+
+ sop = &so->next;
+ }
+ }
+
+ return so_head;
+}
+
/* Get the address of the link_map for a given OBJFILE. */
CORE_ADDR
/* Cause svr4_current_sos() to be run if it hasn't been already. */
if (info->main_lm_addr == 0)
- solib_add (NULL, 0, ¤t_target, auto_solib_add);
+ solib_add (NULL, 0, auto_solib_add);
/* svr4_current_sos() will set main_lm_addr for the main executable. */
if (objfile == symfile_objfile)
of shared libraries. */
for (so = master_so_list (); so; so = so->next)
if (so->objfile == objfile)
- return so->lm_info->lm_addr;
+ {
+ lm_info_svr4 *li = (lm_info_svr4 *) so->lm_info;
+
+ return li->lm_addr;
+ }
/* Not found! */
return 0;
&& pc < info->interp_text_sect_high)
|| (pc >= info->interp_plt_sect_low
&& pc < info->interp_plt_sect_high)
- || in_plt_section (pc, NULL)
+ || in_plt_section (pc)
|| in_gnu_ifunc_stub (pc));
}
static CORE_ADDR
exec_entry_point (struct bfd *abfd, struct target_ops *targ)
{
+ CORE_ADDR addr;
+
/* KevinB wrote ... for most targets, the address returned by
bfd_get_start_address() is the entry point for the start
function. But, for some targets, bfd_get_start_address() returns
gdbarch_convert_from_func_ptr_addr(). The method
gdbarch_convert_from_func_ptr_addr() is the merely the identify
function for targets which don't use function descriptors. */
- return gdbarch_convert_from_func_ptr_addr (target_gdbarch (),
+ addr = gdbarch_convert_from_func_ptr_addr (target_gdbarch (),
bfd_get_start_address (abfd),
targ);
+ return gdbarch_addr_bits_remove (target_gdbarch (), addr);
+}
+
+/* A probe and its associated action. */
+
+struct probe_and_action
+{
+ /* The probe. */
+ probe *prob;
+
+ /* The relocated address of the probe. */
+ CORE_ADDR address;
+
+ /* The action. */
+ enum probe_action action;
+};
+
+/* Returns a hash code for the probe_and_action referenced by p. */
+
+static hashval_t
+hash_probe_and_action (const void *p)
+{
+ const struct probe_and_action *pa = (const struct probe_and_action *) p;
+
+ return (hashval_t) pa->address;
+}
+
+/* Returns non-zero if the probe_and_actions referenced by p1 and p2
+ are equal. */
+
+static int
+equal_probe_and_action (const void *p1, const void *p2)
+{
+ const struct probe_and_action *pa1 = (const struct probe_and_action *) p1;
+ const struct probe_and_action *pa2 = (const struct probe_and_action *) p2;
+
+ return pa1->address == pa2->address;
+}
+
+/* Register a solib event probe and its associated action in the
+ probes table. */
+
+static void
+register_solib_event_probe (probe *prob, CORE_ADDR address,
+ enum probe_action action)
+{
+ struct svr4_info *info = get_svr4_info ();
+ struct probe_and_action lookup, *pa;
+ void **slot;
+
+ /* Create the probes table, if necessary. */
+ if (info->probes_table == NULL)
+ info->probes_table = htab_create_alloc (1, hash_probe_and_action,
+ equal_probe_and_action,
+ xfree, xcalloc, xfree);
+
+ lookup.prob = prob;
+ lookup.address = address;
+ slot = htab_find_slot (info->probes_table, &lookup, INSERT);
+ gdb_assert (*slot == HTAB_EMPTY_ENTRY);
+
+ pa = XCNEW (struct probe_and_action);
+ pa->prob = prob;
+ pa->address = address;
+ pa->action = action;
+
+ *slot = pa;
+}
+
+/* Get the solib event probe at the specified location, and the
+ action associated with it. Returns NULL if no solib event probe
+ was found. */
+
+static struct probe_and_action *
+solib_event_probe_at (struct svr4_info *info, CORE_ADDR address)
+{
+ struct probe_and_action lookup;
+ void **slot;
+
+ lookup.address = address;
+ slot = htab_find_slot (info->probes_table, &lookup, NO_INSERT);
+
+ if (slot == NULL)
+ return NULL;
+
+ return (struct probe_and_action *) *slot;
+}
+
+/* Decide what action to take when the specified solib event probe is
+ hit. */
+
+static enum probe_action
+solib_event_probe_action (struct probe_and_action *pa)
+{
+ enum probe_action action;
+ unsigned probe_argc = 0;
+ struct frame_info *frame = get_current_frame ();
+
+ action = pa->action;
+ if (action == DO_NOTHING || action == PROBES_INTERFACE_FAILED)
+ return action;
+
+ gdb_assert (action == FULL_RELOAD || action == UPDATE_OR_RELOAD);
+
+ /* Check that an appropriate number of arguments has been supplied.
+ We expect:
+ arg0: Lmid_t lmid (mandatory)
+ arg1: struct r_debug *debug_base (mandatory)
+ arg2: struct link_map *new (optional, for incremental updates) */
+ TRY
+ {
+ probe_argc = pa->prob->get_argument_count (frame);
+ }
+ CATCH (ex, RETURN_MASK_ERROR)
+ {
+ exception_print (gdb_stderr, ex);
+ probe_argc = 0;
+ }
+ END_CATCH
+
+ /* If get_argument_count throws an exception, probe_argc will be set
+ to zero. However, if pa->prob does not have arguments, then
+ get_argument_count will succeed but probe_argc will also be zero.
+ Both cases happen because of different things, but they are
+ treated equally here: action will be set to
+ PROBES_INTERFACE_FAILED. */
+ if (probe_argc == 2)
+ action = FULL_RELOAD;
+ else if (probe_argc < 2)
+ action = PROBES_INTERFACE_FAILED;
+
+ return action;
+}
+
+/* Populate the shared object list by reading the entire list of
+ shared objects from the inferior. Handle special cases relating
+ to the first elements of the list. Returns nonzero on success. */
+
+static int
+solist_update_full (struct svr4_info *info)
+{
+ free_solib_list (info);
+ info->solib_list = svr4_current_sos_direct (info);
+
+ return 1;
+}
+
+/* Update the shared object list starting from the link-map entry
+ passed by the linker in the probe's third argument. Returns
+ nonzero if the list was successfully updated, or zero to indicate
+ failure. */
+
+static int
+solist_update_incremental (struct svr4_info *info, CORE_ADDR lm)
+{
+ struct so_list *tail;
+ CORE_ADDR prev_lm;
+
+ /* svr4_current_sos_direct contains logic to handle a number of
+ special cases relating to the first elements of the list. To
+ avoid duplicating this logic we defer to solist_update_full
+ if the list is empty. */
+ if (info->solib_list == NULL)
+ return 0;
+
+ /* Fall back to a full update if we are using a remote target
+ that does not support incremental transfers. */
+ if (info->using_xfer && !target_augmented_libraries_svr4_read ())
+ return 0;
+
+ /* Walk to the end of the list. */
+ for (tail = info->solib_list; tail->next != NULL; tail = tail->next)
+ /* Nothing. */;
+
+ lm_info_svr4 *li = (lm_info_svr4 *) tail->lm_info;
+ prev_lm = li->lm_addr;
+
+ /* Read the new objects. */
+ if (info->using_xfer)
+ {
+ struct svr4_library_list library_list;
+ char annex[64];
+
+ xsnprintf (annex, sizeof (annex), "start=%s;prev=%s",
+ phex_nz (lm, sizeof (lm)),
+ phex_nz (prev_lm, sizeof (prev_lm)));
+ if (!svr4_current_sos_via_xfer_libraries (&library_list, annex))
+ return 0;
+
+ tail->next = library_list.head;
+ }
+ else
+ {
+ struct so_list **link = &tail->next;
+
+ /* IGNORE_FIRST may safely be set to zero here because the
+ above check and deferral to solist_update_full ensures
+ that this call to svr4_read_so_list will never see the
+ first element. */
+ if (!svr4_read_so_list (lm, prev_lm, &link, 0))
+ return 0;
+ }
+
+ return 1;
+}
+
+/* Disable the probes-based linker interface and revert to the
+ original interface. We don't reset the breakpoints as the
+ ones set up for the probes-based interface are adequate. */
+
+static void
+disable_probes_interface_cleanup (void *arg)
+{
+ struct svr4_info *info = get_svr4_info ();
+
+ warning (_("Probes-based dynamic linker interface failed.\n"
+ "Reverting to original interface.\n"));
+
+ free_probes_table (info);
+ free_solib_list (info);
+}
+
+/* Update the solib list as appropriate when using the
+ probes-based linker interface. Do nothing if using the
+ standard interface. */
+
+static void
+svr4_handle_solib_event (void)
+{
+ struct svr4_info *info = get_svr4_info ();
+ struct probe_and_action *pa;
+ enum probe_action action;
+ struct cleanup *old_chain, *usm_chain;
+ struct value *val = NULL;
+ CORE_ADDR pc, debug_base, lm = 0;
+ struct frame_info *frame = get_current_frame ();
+
+ /* Do nothing if not using the probes interface. */
+ if (info->probes_table == NULL)
+ return;
+
+ /* If anything goes wrong we revert to the original linker
+ interface. */
+ old_chain = make_cleanup (disable_probes_interface_cleanup, NULL);
+
+ pc = regcache_read_pc (get_current_regcache ());
+ pa = solib_event_probe_at (info, pc);
+ if (pa == NULL)
+ {
+ do_cleanups (old_chain);
+ return;
+ }
+
+ action = solib_event_probe_action (pa);
+ if (action == PROBES_INTERFACE_FAILED)
+ {
+ do_cleanups (old_chain);
+ return;
+ }
+
+ if (action == DO_NOTHING)
+ {
+ discard_cleanups (old_chain);
+ return;
+ }
+
+ /* evaluate_argument looks up symbols in the dynamic linker
+ using find_pc_section. find_pc_section is accelerated by a cache
+ called the section map. The section map is invalidated every
+ time a shared library is loaded or unloaded, and if the inferior
+ is generating a lot of shared library events then the section map
+ will be updated every time svr4_handle_solib_event is called.
+ We called find_pc_section in svr4_create_solib_event_breakpoints,
+ so we can guarantee that the dynamic linker's sections are in the
+ section map. We can therefore inhibit section map updates across
+ these calls to evaluate_argument and save a lot of time. */
+ inhibit_section_map_updates (current_program_space);
+ usm_chain = make_cleanup (resume_section_map_updates_cleanup,
+ current_program_space);
+
+ TRY
+ {
+ val = pa->prob->evaluate_argument (1, frame);
+ }
+ CATCH (ex, RETURN_MASK_ERROR)
+ {
+ exception_print (gdb_stderr, ex);
+ val = NULL;
+ }
+ END_CATCH
+
+ if (val == NULL)
+ {
+ do_cleanups (old_chain);
+ return;
+ }
+
+ debug_base = value_as_address (val);
+ if (debug_base == 0)
+ {
+ do_cleanups (old_chain);
+ return;
+ }
+
+ /* Always locate the debug struct, in case it moved. */
+ info->debug_base = 0;
+ if (locate_base (info) == 0)
+ {
+ do_cleanups (old_chain);
+ return;
+ }
+
+ /* GDB does not currently support libraries loaded via dlmopen
+ into namespaces other than the initial one. We must ignore
+ any namespace other than the initial namespace here until
+ support for this is added to GDB. */
+ if (debug_base != info->debug_base)
+ action = DO_NOTHING;
+
+ if (action == UPDATE_OR_RELOAD)
+ {
+ TRY
+ {
+ val = pa->prob->evaluate_argument (2, frame);
+ }
+ CATCH (ex, RETURN_MASK_ERROR)
+ {
+ exception_print (gdb_stderr, ex);
+ do_cleanups (old_chain);
+ return;
+ }
+ END_CATCH
+
+ if (val != NULL)
+ lm = value_as_address (val);
+
+ if (lm == 0)
+ action = FULL_RELOAD;
+ }
+
+ /* Resume section map updates. */
+ do_cleanups (usm_chain);
+
+ if (action == UPDATE_OR_RELOAD)
+ {
+ if (!solist_update_incremental (info, lm))
+ action = FULL_RELOAD;
+ }
+
+ if (action == FULL_RELOAD)
+ {
+ if (!solist_update_full (info))
+ {
+ do_cleanups (old_chain);
+ return;
+ }
+ }
+
+ discard_cleanups (old_chain);
+}
+
+/* Helper function for svr4_update_solib_event_breakpoints. */
+
+static int
+svr4_update_solib_event_breakpoint (struct breakpoint *b, void *arg)
+{
+ struct bp_location *loc;
+
+ if (b->type != bp_shlib_event)
+ {
+ /* Continue iterating. */
+ return 0;
+ }
+
+ for (loc = b->loc; loc != NULL; loc = loc->next)
+ {
+ struct svr4_info *info;
+ struct probe_and_action *pa;
+
+ info = ((struct svr4_info *)
+ program_space_data (loc->pspace, solib_svr4_pspace_data));
+ if (info == NULL || info->probes_table == NULL)
+ continue;
+
+ pa = solib_event_probe_at (info, loc->address);
+ if (pa == NULL)
+ continue;
+
+ if (pa->action == DO_NOTHING)
+ {
+ if (b->enable_state == bp_disabled && stop_on_solib_events)
+ enable_breakpoint (b);
+ else if (b->enable_state == bp_enabled && !stop_on_solib_events)
+ disable_breakpoint (b);
+ }
+
+ break;
+ }
+
+ /* Continue iterating. */
+ return 0;
+}
+
+/* Enable or disable optional solib event breakpoints as appropriate.
+ Called whenever stop_on_solib_events is changed. */
+
+static void
+svr4_update_solib_event_breakpoints (void)
+{
+ iterate_over_breakpoints (svr4_update_solib_event_breakpoint, NULL);
+}
+
+/* Create and register solib event breakpoints. PROBES is an array
+ of NUM_PROBES elements, each of which is vector of probes. A
+ solib event breakpoint will be created and registered for each
+ probe. */
+
+static void
+svr4_create_probe_breakpoints (struct gdbarch *gdbarch,
+ const std::vector<probe *> *probes,
+ struct objfile *objfile)
+{
+ for (int i = 0; i < NUM_PROBES; i++)
+ {
+ enum probe_action action = probe_info[i].action;
+
+ for (probe *p : probes[i])
+ {
+ CORE_ADDR address = p->get_relocated_address (objfile);
+
+ create_solib_event_breakpoint (gdbarch, address);
+ register_solib_event_probe (p, address, action);
+ }
+ }
+
+ svr4_update_solib_event_breakpoints ();
+}
+
+/* Both the SunOS and the SVR4 dynamic linkers call a marker function
+ before and after mapping and unmapping shared libraries. The sole
+ purpose of this method is to allow debuggers to set a breakpoint so
+ they can track these changes.
+
+ Some versions of the glibc dynamic linker contain named probes
+ to allow more fine grained stopping. Given the address of the
+ original marker function, this function attempts to find these
+ probes, and if found, sets breakpoints on those instead. If the
+ probes aren't found, a single breakpoint is set on the original
+ marker function. */
+
+static void
+svr4_create_solib_event_breakpoints (struct gdbarch *gdbarch,
+ CORE_ADDR address)
+{
+ struct obj_section *os;
+
+ os = find_pc_section (address);
+ if (os != NULL)
+ {
+ int with_prefix;
+
+ for (with_prefix = 0; with_prefix <= 1; with_prefix++)
+ {
+ std::vector<probe *> probes[NUM_PROBES];
+ int all_probes_found = 1;
+ int checked_can_use_probe_arguments = 0;
+
+ for (int i = 0; i < NUM_PROBES; i++)
+ {
+ const char *name = probe_info[i].name;
+ probe *p;
+ char buf[32];
+
+ /* Fedora 17 and Red Hat Enterprise Linux 6.2-6.4
+ shipped with an early version of the probes code in
+ which the probes' names were prefixed with "rtld_"
+ and the "map_failed" probe did not exist. The
+ locations of the probes are otherwise the same, so
+ we check for probes with prefixed names if probes
+ with unprefixed names are not present. */
+ if (with_prefix)
+ {
+ xsnprintf (buf, sizeof (buf), "rtld_%s", name);
+ name = buf;
+ }
+
+ probes[i] = find_probes_in_objfile (os->objfile, "rtld", name);
+
+ /* The "map_failed" probe did not exist in early
+ versions of the probes code in which the probes'
+ names were prefixed with "rtld_". */
+ if (strcmp (name, "rtld_map_failed") == 0)
+ continue;
+
+ if (probes[i].empty ())
+ {
+ all_probes_found = 0;
+ break;
+ }
+
+ /* Ensure probe arguments can be evaluated. */
+ if (!checked_can_use_probe_arguments)
+ {
+ p = probes[i][0];
+ if (!p->can_evaluate_arguments ())
+ {
+ all_probes_found = 0;
+ break;
+ }
+ checked_can_use_probe_arguments = 1;
+ }
+ }
+
+ if (all_probes_found)
+ svr4_create_probe_breakpoints (gdbarch, probes, os->objfile);
+
+ if (all_probes_found)
+ return;
+ }
+ }
+
+ create_solib_event_breakpoint (gdbarch, address);
}
/* Helper function for gdb_bfd_lookup_symbol. */
static int
-cmp_name_and_sec_flags (asymbol *sym, void *data)
+cmp_name_and_sec_flags (const asymbol *sym, const void *data)
{
return (strcmp (sym->name, (const char *) data) == 0
&& (sym->section->flags & (SEC_CODE | SEC_DATA)) != 0);
static int
enable_break (struct svr4_info *info, int from_tty)
{
- struct minimal_symbol *msymbol;
+ struct bound_minimal_symbol msymbol;
const char * const *bkpt_namep;
asection *interp_sect;
- gdb_byte *interp_name;
+ char *interp_name;
CORE_ADDR sym_addr;
info->interp_text_sect_low = info->interp_text_sect_high = 0;
mean r_brk has already been relocated. Assume the dynamic linker
is the object containing r_brk. */
- solib_add (NULL, from_tty, ¤t_target, auto_solib_add);
+ solib_add (NULL, from_tty, auto_solib_add);
sym_addr = 0;
if (info->debug_base && solib_svr4_r_map (info) != 0)
sym_addr = solib_svr4_r_brk (info);
That knowledge is encoded in the address, if it's Thumb the low bit
is 1. However, we've stripped that info above and it's not clear
what all the consequences are of passing a non-addr_bits_remove'd
- address to create_solib_event_breakpoint. The call to
+ address to svr4_create_solib_event_breakpoints. The call to
find_pc_section verifies we know about the address and have some
hope of computing the right kind of breakpoint to use (via
symbol info). It does mean that GDB needs to be pointed at a
tmp_bfd = os->objfile->obfd;
load_addr = ANOFFSET (os->objfile->section_offsets,
- os->objfile->sect_index_text);
+ SECT_OFF_TEXT (os->objfile));
interp_sect = bfd_get_section_by_name (tmp_bfd, ".text");
if (interp_sect)
+ bfd_section_size (tmp_bfd, interp_sect);
}
- create_solib_event_breakpoint (target_gdbarch (), sym_addr);
+ svr4_create_solib_event_breakpoints (target_gdbarch (), sym_addr);
return 1;
}
}
int load_addr_found = 0;
int loader_found_in_list = 0;
struct so_list *so;
- bfd *tmp_bfd = NULL;
struct target_ops *tmp_bfd_target;
- volatile struct gdb_exception ex;
sym_addr = 0;
be trivial on GNU/Linux). Therefore, we have to try an alternate
mechanism to find the dynamic linker's base address. */
- TRY_CATCH (ex, RETURN_MASK_ALL)
+ gdb_bfd_ref_ptr tmp_bfd;
+ TRY
{
tmp_bfd = solib_bfd_open (interp_name);
}
+ CATCH (ex, RETURN_MASK_ALL)
+ {
+ }
+ END_CATCH
+
if (tmp_bfd == NULL)
goto bkpt_at_symbol;
/* Now convert the TMP_BFD into a target. That way target, as
- well as BFD operations can be used. */
- tmp_bfd_target = target_bfd_reopen (tmp_bfd);
- /* target_bfd_reopen acquired its own reference, so we can
- release ours now. */
- gdb_bfd_unref (tmp_bfd);
+ well as BFD operations can be used. target_bfd_reopen
+ acquires its own reference. */
+ tmp_bfd_target = target_bfd_reopen (tmp_bfd.get ());
/* On a running target, we can get the dynamic linker's base
address from the shared library table. */
{
load_addr_found = 1;
loader_found_in_list = 1;
- load_addr = lm_addr_check (so, tmp_bfd);
+ load_addr = lm_addr_check (so, tmp_bfd.get ());
break;
}
so = so->next;
if (addr_bit < (sizeof (CORE_ADDR) * HOST_CHAR_BIT))
{
CORE_ADDR space_size = (CORE_ADDR) 1 << addr_bit;
- CORE_ADDR tmp_entry_point = exec_entry_point (tmp_bfd,
+ CORE_ADDR tmp_entry_point = exec_entry_point (tmp_bfd.get (),
tmp_bfd_target);
gdb_assert (load_addr < space_size);
= get_thread_arch_regcache (inferior_ptid, target_gdbarch ());
load_addr = (regcache_read_pc (regcache)
- - exec_entry_point (tmp_bfd, tmp_bfd_target));
+ - exec_entry_point (tmp_bfd.get (), tmp_bfd_target));
}
if (!loader_found_in_list)
info->debug_loader_name = xstrdup (interp_name);
info->debug_loader_offset_p = 1;
info->debug_loader_offset = load_addr;
- solib_add (NULL, from_tty, ¤t_target, auto_solib_add);
+ solib_add (NULL, from_tty, auto_solib_add);
}
/* Record the relocated start and end address of the dynamic linker
text and plt section for svr4_in_dynsym_resolve_code. */
- interp_sect = bfd_get_section_by_name (tmp_bfd, ".text");
+ interp_sect = bfd_get_section_by_name (tmp_bfd.get (), ".text");
if (interp_sect)
{
info->interp_text_sect_low =
- bfd_section_vma (tmp_bfd, interp_sect) + load_addr;
+ bfd_section_vma (tmp_bfd.get (), interp_sect) + load_addr;
info->interp_text_sect_high =
info->interp_text_sect_low
- + bfd_section_size (tmp_bfd, interp_sect);
+ + bfd_section_size (tmp_bfd.get (), interp_sect);
}
- interp_sect = bfd_get_section_by_name (tmp_bfd, ".plt");
+ interp_sect = bfd_get_section_by_name (tmp_bfd.get (), ".plt");
if (interp_sect)
{
info->interp_plt_sect_low =
- bfd_section_vma (tmp_bfd, interp_sect) + load_addr;
+ bfd_section_vma (tmp_bfd.get (), interp_sect) + load_addr;
info->interp_plt_sect_high =
info->interp_plt_sect_low
- + bfd_section_size (tmp_bfd, interp_sect);
+ + bfd_section_size (tmp_bfd.get (), interp_sect);
}
/* Now try to set a breakpoint in the dynamic linker. */
for (bkpt_namep = solib_break_names; *bkpt_namep != NULL; bkpt_namep++)
{
- sym_addr = gdb_bfd_lookup_symbol (tmp_bfd, cmp_name_and_sec_flags,
- (void *) *bkpt_namep);
+ sym_addr = gdb_bfd_lookup_symbol (tmp_bfd.get (),
+ cmp_name_and_sec_flags,
+ *bkpt_namep);
if (sym_addr != 0)
break;
}
/* We're done with both the temporary bfd and target. Closing
the target closes the underlying bfd, because it holds the
only remaining reference. */
- target_close (tmp_bfd_target, 0);
+ target_close (tmp_bfd_target);
if (sym_addr != 0)
{
- create_solib_event_breakpoint (target_gdbarch (), load_addr + sym_addr);
+ svr4_create_solib_event_breakpoints (target_gdbarch (),
+ load_addr + sym_addr);
xfree (interp_name);
return 1;
}
for (bkpt_namep = solib_break_names; *bkpt_namep != NULL; bkpt_namep++)
{
msymbol = lookup_minimal_symbol (*bkpt_namep, NULL, symfile_objfile);
- if ((msymbol != NULL) && (SYMBOL_VALUE_ADDRESS (msymbol) != 0))
+ if ((msymbol.minsym != NULL)
+ && (BMSYMBOL_VALUE_ADDRESS (msymbol) != 0))
{
- sym_addr = SYMBOL_VALUE_ADDRESS (msymbol);
+ sym_addr = BMSYMBOL_VALUE_ADDRESS (msymbol);
sym_addr = gdbarch_convert_from_func_ptr_addr (target_gdbarch (),
sym_addr,
¤t_target);
- create_solib_event_breakpoint (target_gdbarch (), sym_addr);
+ svr4_create_solib_event_breakpoints (target_gdbarch (), sym_addr);
return 1;
}
}
for (bkpt_namep = bkpt_names; *bkpt_namep != NULL; bkpt_namep++)
{
msymbol = lookup_minimal_symbol (*bkpt_namep, NULL, symfile_objfile);
- if ((msymbol != NULL) && (SYMBOL_VALUE_ADDRESS (msymbol) != 0))
+ if ((msymbol.minsym != NULL)
+ && (BMSYMBOL_VALUE_ADDRESS (msymbol) != 0))
{
- sym_addr = SYMBOL_VALUE_ADDRESS (msymbol);
+ sym_addr = BMSYMBOL_VALUE_ADDRESS (msymbol);
sym_addr = gdbarch_convert_from_func_ptr_addr (target_gdbarch (),
sym_addr,
¤t_target);
- create_solib_event_breakpoint (target_gdbarch (), sym_addr);
+ svr4_create_solib_event_breakpoints (target_gdbarch (), sym_addr);
return 1;
}
}
return 0;
}
-/* Implement the "special_symbol_handling" target_so_ops method. */
-
-static void
-svr4_special_symbol_handling (void)
-{
- /* Nothing to do. */
-}
-
/* Read the ELF program headers from ABFD. Return the contents and
set *PHDRS_SIZE to the size of the program headers. */
if (*phdrs_size == 0)
return NULL;
- buf = xmalloc (*phdrs_size);
+ buf = (gdb_byte *) xmalloc (*phdrs_size);
if (bfd_seek (abfd, ehdr->e_phoff, SEEK_SET) != 0
|| bfd_bread (buf, *phdrs_size, abfd) != *phdrs_size)
{
{
/* ENTRY_POINT is a possible function descriptor - before
a call to gdbarch_convert_from_func_ptr_addr. */
- CORE_ADDR entry_point, displacement;
+ CORE_ADDR entry_point, exec_displacement;
if (exec_bfd == NULL)
return 0;
if (target_auxv_search (¤t_target, AT_ENTRY, &entry_point) <= 0)
return 0;
- displacement = entry_point - bfd_get_start_address (exec_bfd);
+ exec_displacement = entry_point - bfd_get_start_address (exec_bfd);
- /* Verify the DISPLACEMENT candidate complies with the required page
+ /* Verify the EXEC_DISPLACEMENT candidate complies with the required page
alignment. It is cheaper than the program headers comparison below. */
if (bfd_get_flavour (exec_bfd) == bfd_target_elf_flavour)
p_offset % p_align == p_vaddr % p_align
Kernel is free to load the executable with lower alignment. */
- if ((displacement & (elf->minpagesize - 1)) != 0)
+ if ((exec_displacement & (elf->minpagesize - 1)) != 0)
return 0;
}
gdb_byte *buf, *buf2;
int arch_size;
- buf = read_program_header (-1, &phdrs_size, &arch_size);
+ buf = read_program_header (-1, &phdrs_size, &arch_size, NULL);
buf2 = read_program_headers_from_bfd (exec_bfd, &phdrs2_size);
if (buf != NULL && buf2 != NULL)
{
if (memcmp (phdrp, phdr2p, sizeof (*phdrp)) == 0)
continue;
+ /* Strip modifies the flags and alignment of PT_GNU_RELRO.
+ CentOS-5 has problems with filesz, memsz as well.
+ See PR 11786. */
+ if (phdr2[i].p_type == PT_GNU_RELRO)
+ {
+ Elf32_External_Phdr tmp_phdr = *phdrp;
+ Elf32_External_Phdr tmp_phdr2 = *phdr2p;
+
+ memset (tmp_phdr.p_filesz, 0, 4);
+ memset (tmp_phdr.p_memsz, 0, 4);
+ memset (tmp_phdr.p_flags, 0, 4);
+ memset (tmp_phdr.p_align, 0, 4);
+ memset (tmp_phdr2.p_filesz, 0, 4);
+ memset (tmp_phdr2.p_memsz, 0, 4);
+ memset (tmp_phdr2.p_flags, 0, 4);
+ memset (tmp_phdr2.p_align, 0, 4);
+
+ if (memcmp (&tmp_phdr, &tmp_phdr2, sizeof (tmp_phdr))
+ == 0)
+ continue;
+ }
+
/* prelink can convert .plt SHT_NOBITS to SHT_PROGBITS. */
plt2_asect = bfd_get_section_by_name (exec_bfd, ".plt");
if (plt2_asect)
if (memcmp (phdrp, phdr2p, sizeof (*phdrp)) == 0)
continue;
+ /* Strip modifies the flags and alignment of PT_GNU_RELRO.
+ CentOS-5 has problems with filesz, memsz as well.
+ See PR 11786. */
+ if (phdr2[i].p_type == PT_GNU_RELRO)
+ {
+ Elf64_External_Phdr tmp_phdr = *phdrp;
+ Elf64_External_Phdr tmp_phdr2 = *phdr2p;
+
+ memset (tmp_phdr.p_filesz, 0, 8);
+ memset (tmp_phdr.p_memsz, 0, 8);
+ memset (tmp_phdr.p_flags, 0, 4);
+ memset (tmp_phdr.p_align, 0, 8);
+ memset (tmp_phdr2.p_filesz, 0, 8);
+ memset (tmp_phdr2.p_memsz, 0, 8);
+ memset (tmp_phdr2.p_flags, 0, 4);
+ memset (tmp_phdr2.p_align, 0, 8);
+
+ if (memcmp (&tmp_phdr, &tmp_phdr2, sizeof (tmp_phdr))
+ == 0)
+ continue;
+ }
+
/* prelink can convert .plt SHT_NOBITS to SHT_PROGBITS. */
plt2_asect = bfd_get_section_by_name (exec_bfd, ".plt");
if (plt2_asect)
printf_unfiltered (_("Using PIE (Position Independent Executable) "
"displacement %s for \"%s\".\n"),
- paddress (target_gdbarch (), displacement),
+ paddress (target_gdbarch (), exec_displacement),
bfd_get_filename (exec_bfd));
}
- *displacementp = displacement;
+ *displacementp = exec_displacement;
return 1;
}
struct section_offsets *new_offsets;
int i;
- new_offsets = alloca (symfile_objfile->num_sections
- * sizeof (*new_offsets));
+ new_offsets = XALLOCAVEC (struct section_offsets,
+ symfile_objfile->num_sections);
for (i = 0; i < symfile_objfile->num_sections; i++)
new_offsets->offsets[i] = displacement;
This function is responsible for discovering those names and
addresses, and saving sufficient information about them to allow
- their symbols to be read at a later time.
-
- FIXME
-
- Between enable_break() and disable_break(), this code does not
- properly handle hitting breakpoints which the user might have
- set in the startup code or in the dynamic linker itself. Proper
- handling will probably have to wait until the implementation is
- changed to use the "breakpoint handler function" method.
-
- Also, what if child has exit()ed? Must exit loop somehow. */
+ their symbols to be read at a later time. */
static void
svr4_solib_create_inferior_hook (int from_tty)
{
-#if defined(_SCO_DS)
- struct inferior *inf;
- struct thread_info *tp;
-#endif /* defined(_SCO_DS) */
struct svr4_info *info;
info = get_svr4_info ();
+ /* Clear the probes-based interface's state. */
+ free_probes_table (info);
+ free_solib_list (info);
+
/* Relocate the main executable if necessary. */
svr4_relocate_main_executable ();
if (!enable_break (info, from_tty))
return;
-
-#if defined(_SCO_DS)
- /* SCO needs the loop below, other systems should be using the
- special shared library breakpoints and the shared library breakpoint
- service routine.
-
- Now run the target. It will eventually hit the breakpoint, at
- which point all of the libraries will have been mapped in and we
- can go groveling around in the dynamic linker structures to find
- out what we need to know about them. */
-
- inf = current_inferior ();
- tp = inferior_thread ();
-
- clear_proceed_status ();
- inf->control.stop_soon = STOP_QUIETLY;
- tp->suspend.stop_signal = GDB_SIGNAL_0;
- do
- {
- target_resume (pid_to_ptid (-1), 0, tp->suspend.stop_signal);
- wait_for_inferior ();
- }
- while (tp->suspend.stop_signal != GDB_SIGNAL_TRAP);
- inf->control.stop_soon = NO_STOP_QUIETLY;
-#endif /* defined(_SCO_DS) */
}
static void
svr4_relocate_section_addresses (struct so_list *so,
struct target_section *sec)
{
- sec->addr = svr4_truncate_ptr (sec->addr + lm_addr_check (so,
- sec->bfd));
- sec->endaddr = svr4_truncate_ptr (sec->endaddr + lm_addr_check (so,
- sec->bfd));
+ bfd *abfd = sec->the_bfd_section->owner;
+
+ sec->addr = svr4_truncate_ptr (sec->addr + lm_addr_check (so, abfd));
+ sec->endaddr = svr4_truncate_ptr (sec->endaddr + lm_addr_check (so, abfd));
}
\f
set_solib_svr4_fetch_link_map_offsets (struct gdbarch *gdbarch,
struct link_map_offsets *(*flmo) (void))
{
- struct solib_svr4_ops *ops = gdbarch_data (gdbarch, solib_svr4_data);
+ struct solib_svr4_ops *ops
+ = (struct solib_svr4_ops *) gdbarch_data (gdbarch, solib_svr4_data);
ops->fetch_link_map_offsets = flmo;
static struct link_map_offsets *
svr4_fetch_link_map_offsets (void)
{
- struct solib_svr4_ops *ops = gdbarch_data (target_gdbarch (), solib_svr4_data);
+ struct solib_svr4_ops *ops
+ = (struct solib_svr4_ops *) gdbarch_data (target_gdbarch (),
+ solib_svr4_data);
gdb_assert (ops->fetch_link_map_offsets);
return ops->fetch_link_map_offsets ();
static int
svr4_have_link_map_offsets (void)
{
- struct solib_svr4_ops *ops = gdbarch_data (target_gdbarch (), solib_svr4_data);
+ struct solib_svr4_ops *ops
+ = (struct solib_svr4_ops *) gdbarch_data (target_gdbarch (),
+ solib_svr4_data);
return (ops->fetch_link_map_offsets != NULL);
}
different rule for symbol lookup. The lookup begins here in the DSO, not in
the main executable. */
-static struct symbol *
-elf_lookup_lib_symbol (const struct objfile *objfile,
+static struct block_symbol
+elf_lookup_lib_symbol (struct objfile *objfile,
const char *name,
const domain_enum domain)
{
abfd = objfile->obfd;
}
- if (abfd == NULL || scan_dyntag (DT_SYMBOLIC, abfd, NULL) != 1)
- return NULL;
+ if (abfd == NULL || scan_dyntag (DT_SYMBOLIC, abfd, NULL, NULL) != 1)
+ return (struct block_symbol) {NULL, NULL};
return lookup_global_symbol_from_objfile (objfile, name, domain);
}
-extern initialize_file_ftype _initialize_svr4_solib; /* -Wmissing-prototypes */
-
void
_initialize_svr4_solib (void)
{
svr4_so_ops.relocate_section_addresses = svr4_relocate_section_addresses;
svr4_so_ops.free_so = svr4_free_so;
+ svr4_so_ops.clear_so = svr4_clear_so;
svr4_so_ops.clear_solib = svr4_clear_solib;
svr4_so_ops.solib_create_inferior_hook = svr4_solib_create_inferior_hook;
- svr4_so_ops.special_symbol_handling = svr4_special_symbol_handling;
svr4_so_ops.current_sos = svr4_current_sos;
svr4_so_ops.open_symbol_file_object = open_symbol_file_object;
svr4_so_ops.in_dynsym_resolve_code = svr4_in_dynsym_resolve_code;
svr4_so_ops.lookup_lib_global_symbol = elf_lookup_lib_symbol;
svr4_so_ops.same = svr4_same;
svr4_so_ops.keep_data_in_core = svr4_keep_data_in_core;
+ svr4_so_ops.update_breakpoints = svr4_update_solib_event_breakpoints;
+ svr4_so_ops.handle_event = svr4_handle_solib_event;
}