-/* Handle SunOS and SVR4 shared libraries for GDB, the GNU Debugger.
- Copyright 1990, 91, 92, 93, 94, 95, 96, 98, 1999, 2000
+/* Handle SVR4 shared libraries for GDB, the GNU Debugger.
+
+ Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999,
+ 2000, 2001, 2003, 2004, 2005
Free Software Foundation, Inc.
This file is part of GDB.
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-#define _SYSCALL32 /* for Sparc64 cross Sparc32 */
#include "defs.h"
-
-#include <sys/types.h>
-#include <signal.h>
-#include "gdb_string.h"
-#include <sys/param.h>
-#include <fcntl.h>
-
-#ifndef SVR4_SHARED_LIBS
- /* SunOS shared libs need the nlist structure. */
-#include <a.out.h>
-#else
#include "elf/external.h"
-#endif
-
-#ifdef HAVE_LINK_H
-#include <link.h>
-#endif
+#include "elf/common.h"
+#include "elf/mips.h"
#include "symtab.h"
#include "bfd.h"
#include "symfile.h"
#include "objfiles.h"
#include "gdbcore.h"
-#include "command.h"
#include "target.h"
-#include "frame.h"
-#include "gdb_regex.h"
#include "inferior.h"
-#include "environ.h"
-#include "language.h"
-#include "gdbcmd.h"
+
+#include "gdb_assert.h"
#include "solist.h"
+#include "solib.h"
#include "solib-svr4.h"
+#include "bfd-target.h"
+#include "exec.h"
+
+static struct link_map_offsets *svr4_fetch_link_map_offsets (void);
+static int svr4_have_link_map_offsets (void);
+
+/* This hook is set to a function that provides native link map
+ offsets if the code in solib-legacy.c is linked in. */
+struct link_map_offsets *(*legacy_svr4_fetch_link_map_offsets_hook) (void);
+
/* Link map info to include in an allocated so_list entry */
struct lm_info
/* Pointer to copy of link map from inferior. The type is char *
rather than void *, so that we may use byte offsets to find the
various fields without the need for a cast. */
- char *lm;
+ gdb_byte *lm;
};
/* On SVR4 systems, a list of symbols in the dynamic linker where
SVR4 systems will fall back to using a symbol as the "startup
mapping complete" breakpoint address. */
-#ifdef SVR4_SHARED_LIBS
static char *solib_break_names[] =
{
"r_debug_state",
"_dl_debug_state",
"rtld_db_dlactivity",
"_rtld_debug_state",
+
+ /* On the 64-bit PowerPC, the linker symbol with the same name as
+ the C function points to a function descriptor, not to the entry
+ point. The linker symbol whose name is the C function name
+ prefixed with a '.' points to the function's entry point. So
+ when we look through this table, we ignore symbols that point
+ into the data section (thus skipping the descriptor's symbol),
+ and eventually try this one, giving us the real entry point
+ address. */
+ "._dl_debug_state",
+
NULL
};
-#endif
#define BKPT_AT_SYMBOL 1
-#if defined (BKPT_AT_SYMBOL) && defined (SVR4_SHARED_LIBS)
+#if defined (BKPT_AT_SYMBOL)
static char *bkpt_names[] =
{
#ifdef SOLIB_BKPT_NAME
SOLIB_BKPT_NAME, /* Prefer configured name if it exists. */
#endif
"_start",
+ "__start",
"main",
NULL
};
#endif
-/* Symbols which are used to locate the base of the link map structures. */
-
-#ifndef SVR4_SHARED_LIBS
-static char *debug_base_symbols[] =
-{
- "_DYNAMIC",
- "_DYNAMIC__MGC",
- NULL
-};
-#endif
-
static char *main_name_list[] =
{
"main_$main",
NULL
};
+/* Macro to extract an address from a solib structure. When GDB is
+ configured for some 32-bit targets (e.g. Solaris 2.7 sparc), BFD is
+ configured to handle 64-bit targets, so CORE_ADDR is 64 bits. We
+ have to extract only the significant bits of addresses to get the
+ right address when accessing the core file BFD.
-/* Fetch (and possibly build) an appropriate link_map_offsets structure
- for native targets using struct definitions from link.h. */
-
-struct link_map_offsets *
-default_svr4_fetch_link_map_offsets (void)
-{
-#ifdef HAVE_LINK_H
- static struct link_map_offsets lmo;
- static struct link_map_offsets *lmp = 0;
-#if defined (HAVE_STRUCT_LINK_MAP32)
- static struct link_map_offsets lmo32;
- static struct link_map_offsets *lmp32 = 0;
-#endif
-
-#ifndef offsetof
-#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
-#endif
-#define fieldsize(TYPE, MEMBER) (sizeof (((TYPE *)0)->MEMBER))
-
- if (lmp == 0)
- {
- lmp = &lmo;
-
-#ifdef SVR4_SHARED_LIBS
- lmo.r_debug_size = sizeof (struct r_debug);
-
- lmo.r_map_offset = offsetof (struct r_debug, r_map);
- lmo.r_map_size = fieldsize (struct r_debug, r_map);
-
- lmo.link_map_size = sizeof (struct link_map);
-
- lmo.l_addr_offset = offsetof (struct link_map, l_addr);
- lmo.l_addr_size = fieldsize (struct link_map, l_addr);
-
- lmo.l_next_offset = offsetof (struct link_map, l_next);
- lmo.l_next_size = fieldsize (struct link_map, l_next);
-
- lmo.l_prev_offset = offsetof (struct link_map, l_prev);
- lmo.l_prev_size = fieldsize (struct link_map, l_prev);
-
- lmo.l_name_offset = offsetof (struct link_map, l_name);
- lmo.l_name_size = fieldsize (struct link_map, l_name);
-#else /* !SVR4_SHARED_LIBS */
- lmo.link_map_size = sizeof (struct link_map);
-
- lmo.l_addr_offset = offsetof (struct link_map, lm_addr);
- lmo.l_addr_size = fieldsize (struct link_map, lm_addr);
-
- lmo.l_next_offset = offsetof (struct link_map, lm_next);
- lmo.l_next_size = fieldsize (struct link_map, lm_next);
-
- lmo.l_name_offset = offsetof (struct link_map, lm_name);
- lmo.l_name_size = fieldsize (struct link_map, lm_name);
-#endif /* SVR4_SHARED_LIBS */
- }
-
-#if defined (HAVE_STRUCT_LINK_MAP32)
- if (lmp32 == 0)
- {
- lmp32 = &lmo32;
-
- lmo32.r_debug_size = sizeof (struct r_debug32);
-
- lmo32.r_map_offset = offsetof (struct r_debug32, r_map);
- lmo32.r_map_size = fieldsize (struct r_debug32, r_map);
-
- lmo32.link_map_size = sizeof (struct link_map32);
-
- lmo32.l_addr_offset = offsetof (struct link_map32, l_addr);
- lmo32.l_addr_size = fieldsize (struct link_map32, l_addr);
-
- lmo32.l_next_offset = offsetof (struct link_map32, l_next);
- lmo32.l_next_size = fieldsize (struct link_map32, l_next);
-
- lmo32.l_prev_offset = offsetof (struct link_map32, l_prev);
- lmo32.l_prev_size = fieldsize (struct link_map32, l_prev);
-
- lmo32.l_name_offset = offsetof (struct link_map32, l_name);
- lmo32.l_name_size = fieldsize (struct link_map32, l_name);
- }
-#endif /* defined (HAVE_STRUCT_LINK_MAP32) */
-
-#if defined (HAVE_STRUCT_LINK_MAP32)
- if (bfd_get_arch_size (exec_bfd) == 32)
- return lmp32;
- else
-#endif
- return lmp;
-
-#else
-
- internal_error ("default_svr4_fetch_link_map_offsets called without HAVE_LINK_H defined.");
- return 0;
-
-#endif /* HAVE_LINK_H */
-}
-
-/* Macro to extract an address from a solib structure.
- When GDB is configured for some 32-bit targets (e.g. Solaris 2.7
- sparc), BFD is configured to handle 64-bit targets, so CORE_ADDR is
- 64 bits. We have to extract only the significant bits of addresses
- to get the right address when accessing the core file BFD. */
+ Assume that the address is unsigned. */
#define SOLIB_EXTRACT_ADDRESS(MEMBER) \
- extract_address (&(MEMBER), sizeof (MEMBER))
+ extract_unsigned_integer (&(MEMBER), sizeof (MEMBER))
/* local data declarations */
-#ifndef SVR4_SHARED_LIBS
-
-/* NOTE: converted the macros LM_ADDR, LM_NEXT, LM_NAME and
- IGNORE_FIRST_LINK_MAP_ENTRY into functions (see below).
- MVS, June 2000 */
-
-static struct link_dynamic dynamic_copy;
-static struct link_dynamic_2 ld_2_copy;
-static struct ld_debug debug_copy;
-static CORE_ADDR debug_addr;
-static CORE_ADDR flag_addr;
-
-#endif /* !SVR4_SHARED_LIBS */
-
/* link map access functions */
static CORE_ADDR
LM_ADDR (struct so_list *so)
{
- struct link_map_offsets *lmo = SVR4_FETCH_LINK_MAP_OFFSETS ();
+ struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
- return extract_address (so->lm_info->lm + lmo->l_addr_offset, lmo->l_addr_size);
+ return (CORE_ADDR) extract_signed_integer (so->lm_info->lm + lmo->l_addr_offset,
+ lmo->l_addr_size);
}
static CORE_ADDR
LM_NEXT (struct so_list *so)
{
- struct link_map_offsets *lmo = SVR4_FETCH_LINK_MAP_OFFSETS ();
+ struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
- return extract_address (so->lm_info->lm + lmo->l_next_offset, lmo->l_next_size);
+ /* Assume that the address is unsigned. */
+ return extract_unsigned_integer (so->lm_info->lm + lmo->l_next_offset,
+ lmo->l_next_size);
}
static CORE_ADDR
LM_NAME (struct so_list *so)
{
- struct link_map_offsets *lmo = SVR4_FETCH_LINK_MAP_OFFSETS ();
-
- return extract_address (so->lm_info->lm + lmo->l_name_offset, lmo->l_name_size);
-}
-
-#ifndef SVR4_SHARED_LIBS
+ struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
-static int
-IGNORE_FIRST_LINK_MAP_ENTRY (struct so_list *so)
-{
- return 0;
+ /* Assume that the address is unsigned. */
+ return extract_unsigned_integer (so->lm_info->lm + lmo->l_name_offset,
+ lmo->l_name_size);
}
-#else /* SVR4_SHARED_LIBS */
-
static int
IGNORE_FIRST_LINK_MAP_ENTRY (struct so_list *so)
{
- struct link_map_offsets *lmo = SVR4_FETCH_LINK_MAP_OFFSETS ();
+ struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
- return extract_address (so->lm_info->lm + lmo->l_prev_offset,
- lmo->l_prev_size) == 0;
+ /* Assume that the address is unsigned. */
+ return extract_unsigned_integer (so->lm_info->lm + lmo->l_prev_offset,
+ lmo->l_prev_size) == 0;
}
-#endif /* !SVR4_SHARED_LIBS */
-
static CORE_ADDR debug_base; /* Base of dynamic linker structures */
static CORE_ADDR breakpoint_addr; /* Address where end bkpt is set */
static int match_main (char *);
-#ifndef SVR4_SHARED_LIBS
-
-/* Allocate the runtime common object file. */
-
-static void
-allocate_rt_common_objfile (void)
-{
- struct objfile *objfile;
- struct objfile *last_one;
-
- objfile = (struct objfile *) xmalloc (sizeof (struct objfile));
- memset (objfile, 0, sizeof (struct objfile));
- objfile->md = NULL;
- obstack_specify_allocation (&objfile->psymbol_cache.cache, 0, 0,
- xmalloc, xfree);
- obstack_specify_allocation (&objfile->psymbol_obstack, 0, 0, xmalloc,
- xfree);
- obstack_specify_allocation (&objfile->symbol_obstack, 0, 0, xmalloc,
- xfree);
- obstack_specify_allocation (&objfile->type_obstack, 0, 0, xmalloc,
- xfree);
- objfile->name = mstrsave (objfile->md, "rt_common");
-
- /* Add this file onto the tail of the linked list of other such files. */
-
- objfile->next = NULL;
- if (object_files == NULL)
- object_files = objfile;
- else
- {
- for (last_one = object_files;
- last_one->next;
- last_one = last_one->next);
- last_one->next = objfile;
- }
-
- rt_common_objfile = objfile;
-}
-
-/* Read all dynamically loaded common symbol definitions from the inferior
- and put them into the minimal symbol table for the runtime common
- objfile. */
-
-static void
-solib_add_common_symbols (CORE_ADDR rtc_symp)
-{
- struct rtc_symb inferior_rtc_symb;
- struct nlist inferior_rtc_nlist;
- int len;
- char *name;
-
- /* Remove any runtime common symbols from previous runs. */
-
- if (rt_common_objfile != NULL && rt_common_objfile->minimal_symbol_count)
- {
- obstack_free (&rt_common_objfile->symbol_obstack, 0);
- obstack_specify_allocation (&rt_common_objfile->symbol_obstack, 0, 0,
- xmalloc, xfree);
- rt_common_objfile->minimal_symbol_count = 0;
- rt_common_objfile->msymbols = NULL;
- }
-
- init_minimal_symbol_collection ();
- make_cleanup_discard_minimal_symbols ();
-
- while (rtc_symp)
- {
- read_memory (rtc_symp,
- (char *) &inferior_rtc_symb,
- sizeof (inferior_rtc_symb));
- read_memory (SOLIB_EXTRACT_ADDRESS (inferior_rtc_symb.rtc_sp),
- (char *) &inferior_rtc_nlist,
- sizeof (inferior_rtc_nlist));
- if (inferior_rtc_nlist.n_type == N_COMM)
- {
- /* FIXME: The length of the symbol name is not available, but in the
- current implementation the common symbol is allocated immediately
- behind the name of the symbol. */
- len = inferior_rtc_nlist.n_value - inferior_rtc_nlist.n_un.n_strx;
-
- name = xmalloc (len);
- read_memory (SOLIB_EXTRACT_ADDRESS (inferior_rtc_nlist.n_un.n_name),
- name, len);
-
- /* Allocate the runtime common objfile if necessary. */
- if (rt_common_objfile == NULL)
- allocate_rt_common_objfile ();
-
- prim_record_minimal_symbol (name, inferior_rtc_nlist.n_value,
- mst_bss, rt_common_objfile);
- xfree (name);
- }
- rtc_symp = SOLIB_EXTRACT_ADDRESS (inferior_rtc_symb.rtc_next);
- }
-
- /* Install any minimal symbols that have been collected as the current
- minimal symbols for the runtime common objfile. */
-
- install_minimal_symbols (rt_common_objfile);
-}
-
-#endif /* SVR4_SHARED_LIBS */
-
-
-#ifdef SVR4_SHARED_LIBS
-
-static CORE_ADDR bfd_lookup_symbol (bfd *, char *);
+static CORE_ADDR bfd_lookup_symbol (bfd *, char *, flagword);
/*
SYNOPSIS
- CORE_ADDR bfd_lookup_symbol (bfd *abfd, char *symname)
+ CORE_ADDR bfd_lookup_symbol (bfd *abfd, char *symname, flagword sect_flags)
DESCRIPTION
shared library support to find the address of the debugger
interface structures in the shared library.
+ If SECT_FLAGS is non-zero, only match symbols in sections whose
+ flags include all those in SECT_FLAGS.
+
Note that 0 is specifically allowed as an error return (no
such symbol).
*/
static CORE_ADDR
-bfd_lookup_symbol (bfd *abfd, char *symname)
+bfd_lookup_symbol (bfd *abfd, char *symname, flagword sect_flags)
{
- unsigned int storage_needed;
+ long storage_needed;
asymbol *sym;
asymbol **symbol_table;
unsigned int number_of_symbols;
if (storage_needed > 0)
{
symbol_table = (asymbol **) xmalloc (storage_needed);
- back_to = make_cleanup (xfree, (PTR) symbol_table);
+ back_to = make_cleanup (xfree, symbol_table);
number_of_symbols = bfd_canonicalize_symtab (abfd, symbol_table);
for (i = 0; i < number_of_symbols; i++)
{
sym = *symbol_table++;
- if (STREQ (sym->name, symname))
+ if (strcmp (sym->name, symname) == 0
+ && (sym->section->flags & sect_flags) == sect_flags)
{
/* Bfd symbols are section relative. */
symaddr = sym->value + sym->section->vma;
if (storage_needed > 0)
{
symbol_table = (asymbol **) xmalloc (storage_needed);
- back_to = make_cleanup (xfree, (PTR) symbol_table);
+ back_to = make_cleanup (xfree, symbol_table);
number_of_symbols = bfd_canonicalize_dynamic_symtab (abfd, symbol_table);
for (i = 0; i < number_of_symbols; i++)
{
sym = *symbol_table++;
- if (STREQ (sym->name, symname))
+
+ if (strcmp (sym->name, symname) == 0
+ && (sym->section->flags & sect_flags) == sect_flags)
{
/* Bfd symbols are section relative. */
symaddr = sym->value + sym->section->vma;
return symaddr;
}
-#ifdef HANDLE_SVR4_EXEC_EMULATORS
-
-/*
- Solaris BCP (the part of Solaris which allows it to run SunOS4
- a.out files) throws in another wrinkle. Solaris does not fill
- in the usual a.out link map structures when running BCP programs,
- the only way to get at them is via groping around in the dynamic
- linker.
- The dynamic linker and it's structures are located in the shared
- C library, which gets run as the executable's "interpreter" by
- the kernel.
-
- Note that we can assume nothing about the process state at the time
- we need to find these structures. We may be stopped on the first
- instruction of the interpreter (C shared library), the first
- instruction of the executable itself, or somewhere else entirely
- (if we attached to the process for example).
- */
-
-static char *debug_base_symbols[] =
-{
- "r_debug", /* Solaris 2.3 */
- "_r_debug", /* Solaris 2.1, 2.2 */
- NULL
-};
-
-static int look_for_base (int, CORE_ADDR);
-
-/*
-
- LOCAL FUNCTION
-
- look_for_base -- examine file for each mapped address segment
-
- SYNOPSYS
-
- static int look_for_base (int fd, CORE_ADDR baseaddr)
-
- DESCRIPTION
-
- This function is passed to proc_iterate_over_mappings, which
- causes it to get called once for each mapped address space, with
- an open file descriptor for the file mapped to that space, and the
- base address of that mapped space.
-
- Our job is to find the debug base symbol in the file that this
- fd is open on, if it exists, and if so, initialize the dynamic
- linker structure base address debug_base.
-
- Note that this is a computationally expensive proposition, since
- we basically have to open a bfd on every call, so we specifically
- avoid opening the exec file.
- */
-
-static int
-look_for_base (int fd, CORE_ADDR baseaddr)
-{
- bfd *interp_bfd;
- CORE_ADDR address = 0;
- char **symbolp;
-
- /* If the fd is -1, then there is no file that corresponds to this
- mapped memory segment, so skip it. Also, if the fd corresponds
- to the exec file, skip it as well. */
-
- if (fd == -1
- || (exec_bfd != NULL
- && fdmatch (fileno ((FILE *) (exec_bfd->iostream)), fd)))
- {
- return (0);
- }
-
- /* Try to open whatever random file this fd corresponds to. Note that
- we have no way currently to find the filename. Don't gripe about
- any problems we might have, just fail. */
-
- if ((interp_bfd = bfd_fdopenr ("unnamed", gnutarget, fd)) == NULL)
- {
- return (0);
- }
- if (!bfd_check_format (interp_bfd, bfd_object))
- {
- /* FIXME-leak: on failure, might not free all memory associated with
- interp_bfd. */
- bfd_close (interp_bfd);
- return (0);
- }
-
- /* Now try to find our debug base symbol in this file, which we at
- least know to be a valid ELF executable or shared library. */
-
- for (symbolp = debug_base_symbols; *symbolp != NULL; symbolp++)
- {
- address = bfd_lookup_symbol (interp_bfd, *symbolp);
- if (address != 0)
- {
- break;
- }
- }
- if (address == 0)
- {
- /* FIXME-leak: on failure, might not free all memory associated with
- interp_bfd. */
- bfd_close (interp_bfd);
- return (0);
- }
-
- /* Eureka! We found the symbol. But now we may need to relocate it
- by the base address. If the symbol's value is less than the base
- address of the shared library, then it hasn't yet been relocated
- by the dynamic linker, and we have to do it ourself. FIXME: Note
- that we make the assumption that the first segment that corresponds
- to the shared library has the base address to which the library
- was relocated. */
-
- if (address < baseaddr)
- {
- address += baseaddr;
- }
- debug_base = address;
- /* FIXME-leak: on failure, might not free all memory associated with
- interp_bfd. */
- bfd_close (interp_bfd);
- return (1);
-}
-#endif /* HANDLE_SVR4_EXEC_EMULATORS */
-
/*
LOCAL FUNCTION
static CORE_ADDR
elf_locate_base (void)
{
- sec_ptr dyninfo_sect;
+ struct bfd_section *dyninfo_sect;
int dyninfo_sect_size;
CORE_ADDR dyninfo_addr;
- char *buf;
- char *bufend;
+ gdb_byte *buf;
+ gdb_byte *bufend;
int arch_size;
/* Find the start address of the .dynamic section. */
(bfd_byte *) x_dynp->d_un.d_ptr);
return dyn_ptr;
}
-#ifdef DT_MIPS_RLD_MAP
else if (dyn_tag == DT_MIPS_RLD_MAP)
{
- char *pbuf;
+ gdb_byte *pbuf;
+ int pbuf_size = TARGET_PTR_BIT / HOST_CHAR_BIT;
- pbuf = alloca (TARGET_PTR_BIT / HOST_CHAR_BIT);
+ pbuf = alloca (pbuf_size);
/* DT_MIPS_RLD_MAP contains a pointer to the address
of the dynamic link structure. */
dyn_ptr = bfd_h_get_32 (exec_bfd,
(bfd_byte *) x_dynp->d_un.d_ptr);
- if (target_read_memory (dyn_ptr, pbuf, sizeof (pbuf)))
+ if (target_read_memory (dyn_ptr, pbuf, pbuf_size))
return 0;
- return extract_unsigned_integer (pbuf, sizeof (pbuf));
+ return extract_unsigned_integer (pbuf, pbuf_size);
}
-#endif
}
}
else /* 64-bit elf */
(bfd_byte *) x_dynp->d_un.d_ptr);
return dyn_ptr;
}
+ else if (dyn_tag == DT_MIPS_RLD_MAP)
+ {
+ gdb_byte *pbuf;
+ int pbuf_size = TARGET_PTR_BIT / HOST_CHAR_BIT;
+
+ pbuf = alloca (pbuf_size);
+ /* DT_MIPS_RLD_MAP contains a pointer to the address
+ of the dynamic link structure. */
+ dyn_ptr = bfd_h_get_64 (exec_bfd,
+ (bfd_byte *) x_dynp->d_un.d_ptr);
+ if (target_read_memory (dyn_ptr, pbuf, pbuf_size))
+ return 0;
+ return extract_unsigned_integer (pbuf, pbuf_size);
+ }
}
}
return 0;
}
-#endif /* SVR4_SHARED_LIBS */
-
/*
LOCAL FUNCTION
static CORE_ADDR
locate_base (void)
{
-
-#ifndef SVR4_SHARED_LIBS
-
- struct minimal_symbol *msymbol;
- CORE_ADDR address = 0;
- char **symbolp;
-
- /* For SunOS, we want to limit the search for the debug base symbol to the
- executable being debugged, since there is a duplicate named symbol in the
- shared library. We don't want the shared library versions. */
-
- for (symbolp = debug_base_symbols; *symbolp != NULL; symbolp++)
- {
- msymbol = lookup_minimal_symbol (*symbolp, NULL, symfile_objfile);
- if ((msymbol != NULL) && (SYMBOL_VALUE_ADDRESS (msymbol) != 0))
- {
- address = SYMBOL_VALUE_ADDRESS (msymbol);
- return (address);
- }
- }
- return (0);
-
-#else /* SVR4_SHARED_LIBS */
-
/* Check to see if we have a currently valid address, and if so, avoid
doing all this work again and just return the cached address. If
we have no cached address, try to locate it in the dynamic info
- section for ELF executables. */
+ section for ELF executables. There's no point in doing any of this
+ though if we don't have some link map offsets to work with. */
- if (debug_base == 0)
+ if (debug_base == 0 && svr4_have_link_map_offsets ())
{
if (exec_bfd != NULL
&& bfd_get_flavour (exec_bfd) == bfd_target_elf_flavour)
debug_base = elf_locate_base ();
-#ifdef HANDLE_SVR4_EXEC_EMULATORS
- /* Try it the hard way for emulated executables. */
- else if (inferior_pid != 0 && target_has_execution)
- proc_iterate_over_mappings (look_for_base);
-#endif
}
return (debug_base);
-
-#endif /* !SVR4_SHARED_LIBS */
-
}
/*
first_link_map_member (void)
{
CORE_ADDR lm = 0;
-
-#ifndef SVR4_SHARED_LIBS
-
- read_memory (debug_base, (char *) &dynamic_copy, sizeof (dynamic_copy));
- if (dynamic_copy.ld_version >= 2)
- {
- /* It is a version that we can deal with, so read in the secondary
- structure and find the address of the link map list from it. */
- read_memory (SOLIB_EXTRACT_ADDRESS (dynamic_copy.ld_un.ld_2),
- (char *) &ld_2_copy, sizeof (struct link_dynamic_2));
- lm = SOLIB_EXTRACT_ADDRESS (ld_2_copy.ld_loaded);
- }
-
-#else /* SVR4_SHARED_LIBS */
- struct link_map_offsets *lmo = SVR4_FETCH_LINK_MAP_OFFSETS ();
- char *r_map_buf = xmalloc (lmo->r_map_size);
+ struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
+ gdb_byte *r_map_buf = xmalloc (lmo->r_map_size);
struct cleanup *cleanups = make_cleanup (xfree, r_map_buf);
read_memory (debug_base + lmo->r_map_offset, r_map_buf, lmo->r_map_size);
- lm = extract_address (r_map_buf, lmo->r_map_size);
+ /* Assume that the address is unsigned. */
+ lm = extract_unsigned_integer (r_map_buf, lmo->r_map_size);
/* FIXME: Perhaps we should validate the info somehow, perhaps by
checking r_version for a known version number, or r_state for
do_cleanups (cleanups);
-#endif /* !SVR4_SHARED_LIBS */
-
return (lm);
}
-#ifdef SVR4_SHARED_LIBS
/*
LOCAL FUNCTION
char *filename;
int errcode;
int from_tty = *(int *)from_ttyp;
- struct link_map_offsets *lmo = SVR4_FETCH_LINK_MAP_OFFSETS ();
- char *l_name_buf = xmalloc (lmo->l_name_size);
+ struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
+ gdb_byte *l_name_buf = xmalloc (lmo->l_name_size);
struct cleanup *cleanups = make_cleanup (xfree, l_name_buf);
if (symfile_objfile)
/* Read address of name from target memory to GDB. */
read_memory (lm + lmo->l_name_offset, l_name_buf, lmo->l_name_size);
- /* Convert the address to host format. */
- l_name = extract_address (l_name_buf, lmo->l_name_size);
+ /* Convert the address to host format. Assume that the address is
+ unsigned. */
+ l_name = extract_unsigned_integer (l_name_buf, lmo->l_name_size);
/* Free l_name_buf. */
do_cleanups (cleanups);
if (errcode)
{
- warning ("failed to read exec filename from attached file: %s",
+ warning (_("failed to read exec filename from attached file: %s"),
safe_strerror (errcode));
return 0;
}
return 1;
}
-#else
-
-static int
-open_symbol_file_object (int *from_ttyp)
-{
- return 1;
-}
-
-#endif /* SVR4_SHARED_LIBS */
-
/* LOCAL FUNCTION
lm = first_link_map_member ();
while (lm)
{
- struct link_map_offsets *lmo = SVR4_FETCH_LINK_MAP_OFFSETS ();
- struct so_list *new
- = (struct so_list *) xmalloc (sizeof (struct so_list));
+ struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
+ struct so_list *new = XZALLOC (struct so_list);
struct cleanup *old_chain = make_cleanup (xfree, new);
- memset (new, 0, sizeof (*new));
-
new->lm_info = xmalloc (sizeof (struct lm_info));
make_cleanup (xfree, new->lm_info);
- new->lm_info->lm = xmalloc (lmo->link_map_size);
+ new->lm_info->lm = xzalloc (lmo->link_map_size);
make_cleanup (xfree, new->lm_info->lm);
- memset (new->lm_info->lm, 0, lmo->link_map_size);
read_memory (lm, new->lm_info->lm, lmo->link_map_size);
target_read_string (LM_NAME (new), &buffer,
SO_NAME_MAX_PATH_SIZE - 1, &errcode);
if (errcode != 0)
- {
- warning ("current_sos: Can't read pathname for load map: %s\n",
- safe_strerror (errcode));
- }
+ warning (_("Can't read pathname for load map: %s."),
+ safe_strerror (errcode));
else
{
strncpy (new->so_name, buffer, SO_NAME_MAX_PATH_SIZE - 1);
return head;
}
+/* Get the address of the link_map for a given OBJFILE. Loop through
+ the link maps, and return the address of the one corresponding to
+ the given objfile. Note that this function takes into account that
+ objfile can be the main executable, not just a shared library. The
+ main executable has always an empty name field in the linkmap. */
+
+CORE_ADDR
+svr4_fetch_objfile_link_map (struct objfile *objfile)
+{
+ CORE_ADDR lm;
+
+ if ((debug_base = locate_base ()) == 0)
+ return 0; /* failed somehow... */
+
+ /* Position ourselves on the first link map. */
+ lm = first_link_map_member ();
+ while (lm)
+ {
+ /* Get info on the layout of the r_debug and link_map structures. */
+ struct link_map_offsets *lmo = svr4_fetch_link_map_offsets ();
+ int errcode;
+ char *buffer;
+ struct lm_info objfile_lm_info;
+ struct cleanup *old_chain;
+ CORE_ADDR name_address;
+ gdb_byte *l_name_buf = xmalloc (lmo->l_name_size);
+ old_chain = make_cleanup (xfree, l_name_buf);
+
+ /* Set up the buffer to contain the portion of the link_map
+ structure that gdb cares about. Note that this is not the
+ whole link_map structure. */
+ objfile_lm_info.lm = xzalloc (lmo->link_map_size);
+ make_cleanup (xfree, objfile_lm_info.lm);
+
+ /* Read the link map into our internal structure. */
+ read_memory (lm, objfile_lm_info.lm, lmo->link_map_size);
+
+ /* Read address of name from target memory to GDB. */
+ read_memory (lm + lmo->l_name_offset, l_name_buf, lmo->l_name_size);
+
+ /* Extract this object's name. Assume that the address is
+ unsigned. */
+ name_address = extract_unsigned_integer (l_name_buf, lmo->l_name_size);
+ target_read_string (name_address, &buffer,
+ SO_NAME_MAX_PATH_SIZE - 1, &errcode);
+ make_cleanup (xfree, buffer);
+ if (errcode != 0)
+ warning (_("Can't read pathname for load map: %s."),
+ safe_strerror (errcode));
+ else
+ {
+ /* Is this the linkmap for the file we want? */
+ /* If the file is not a shared library and has no name,
+ we are sure it is the main executable, so we return that. */
+ if ((buffer && strcmp (buffer, objfile->name) == 0)
+ || (!(objfile->flags & OBJF_SHARED) && (strcmp (buffer, "") == 0)))
+ {
+ do_cleanups (old_chain);
+ return lm;
+ }
+ }
+ /* Not the file we wanted, continue checking. Assume that the
+ address is unsigned. */
+ lm = extract_unsigned_integer (objfile_lm_info.lm + lmo->l_next_offset,
+ lmo->l_next_size);
+ do_cleanups (old_chain);
+ }
+ return 0;
+}
/* On some systems, the only way to recognize the link map entry for
the main executable file is by looking at its name. Return
return (0);
}
-
-#ifdef SVR4_SHARED_LIBS
-
/* Return 1 if PC lies in the dynamic symbol resolution code of the
SVR4 run time loader. */
-
static CORE_ADDR interp_text_sect_low;
static CORE_ADDR interp_text_sect_high;
static CORE_ADDR interp_plt_sect_low;
static CORE_ADDR interp_plt_sect_high;
-int
-in_svr4_dynsym_resolve_code (CORE_ADDR pc)
+static int
+svr4_in_dynsym_resolve_code (CORE_ADDR pc)
{
return ((pc >= interp_text_sect_low && pc < interp_text_sect_high)
|| (pc >= interp_plt_sect_low && pc < interp_plt_sect_high)
|| in_plt_section (pc, NULL));
}
-#endif
-
-/*
-
- LOCAL FUNCTION
-
- disable_break -- remove the "mapping changed" breakpoint
-
- SYNOPSIS
-
- static int disable_break ()
-
- DESCRIPTION
-
- Removes the breakpoint that gets hit when the dynamic linker
- completes a mapping change.
- */
+/* Given an executable's ABFD and target, compute the entry-point
+ address. */
-#ifndef SVR4_SHARED_LIBS
-
-static int
-disable_break (void)
+static CORE_ADDR
+exec_entry_point (struct bfd *abfd, struct target_ops *targ)
{
- int status = 1;
-
- int in_debugger = 0;
-
- /* Read the debugger structure from the inferior to retrieve the
- address of the breakpoint and the original contents of the
- breakpoint address. Remove the breakpoint by writing the original
- contents back. */
-
- read_memory (debug_addr, (char *) &debug_copy, sizeof (debug_copy));
-
- /* Set `in_debugger' to zero now. */
-
- write_memory (flag_addr, (char *) &in_debugger, sizeof (in_debugger));
-
- breakpoint_addr = SOLIB_EXTRACT_ADDRESS (debug_copy.ldd_bp_addr);
- write_memory (breakpoint_addr, (char *) &debug_copy.ldd_bp_inst,
- sizeof (debug_copy.ldd_bp_inst));
-
- /* For the SVR4 version, we always know the breakpoint address. For the
- SunOS version we don't know it until the above code is executed.
- Grumble if we are stopped anywhere besides the breakpoint address. */
-
- if (stop_pc != breakpoint_addr)
- {
- warning ("stopped at unknown breakpoint while handling shared libraries");
- }
-
- return (status);
+ /* KevinB wrote ... for most targets, the address returned by
+ bfd_get_start_address() is the entry point for the start
+ function. But, for some targets, bfd_get_start_address() returns
+ the address of a function descriptor from which the entry point
+ address may be extracted. This address is extracted by
+ gdbarch_convert_from_func_ptr_addr(). The method
+ gdbarch_convert_from_func_ptr_addr() is the merely the identify
+ function for targets which don't use function descriptors. */
+ return gdbarch_convert_from_func_ptr_addr (current_gdbarch,
+ bfd_get_start_address (abfd),
+ targ);
}
-#endif /* #ifdef SVR4_SHARED_LIBS */
-
/*
LOCAL FUNCTION
{
int success = 0;
-#ifndef SVR4_SHARED_LIBS
-
- int j;
- int in_debugger;
-
- /* Get link_dynamic structure */
-
- j = target_read_memory (debug_base, (char *) &dynamic_copy,
- sizeof (dynamic_copy));
- if (j)
- {
- /* unreadable */
- return (0);
- }
-
- /* Calc address of debugger interface structure */
-
- debug_addr = SOLIB_EXTRACT_ADDRESS (dynamic_copy.ldd);
-
- /* Calc address of `in_debugger' member of debugger interface structure */
-
- flag_addr = debug_addr + (CORE_ADDR) ((char *) &debug_copy.ldd_in_debugger -
- (char *) &debug_copy);
-
- /* Write a value of 1 to this member. */
-
- in_debugger = 1;
- write_memory (flag_addr, (char *) &in_debugger, sizeof (in_debugger));
- success = 1;
-
-#else /* SVR4_SHARED_LIBS */
-
#ifdef BKPT_AT_SYMBOL
struct minimal_symbol *msymbol;
may have changed since the last time we ran the program. */
remove_solib_event_breakpoints ();
-#ifdef SVR4_SHARED_LIBS
interp_text_sect_low = interp_text_sect_high = 0;
interp_plt_sect_low = interp_plt_sect_high = 0;
{
unsigned int interp_sect_size;
char *buf;
- CORE_ADDR load_addr;
+ CORE_ADDR load_addr = 0;
+ int load_addr_found = 0;
+ struct so_list *so;
bfd *tmp_bfd = NULL;
+ struct target_ops *tmp_bfd_target;
int tmp_fd = -1;
char *tmp_pathname = NULL;
CORE_ADDR sym_addr = 0;
tmp_fd = solib_open (buf, &tmp_pathname);
if (tmp_fd >= 0)
- tmp_bfd = bfd_fdopenr (tmp_pathname, gnutarget, tmp_fd);
+ tmp_bfd = bfd_fopen (tmp_pathname, gnutarget, FOPEN_RB, tmp_fd);
if (tmp_bfd == NULL)
goto bkpt_at_symbol;
/* Make sure the dynamic linker's really a useful object. */
if (!bfd_check_format (tmp_bfd, bfd_object))
{
- warning ("Unable to grok dynamic linker %s as an object file", buf);
+ warning (_("Unable to grok dynamic linker %s as an object file"), buf);
bfd_close (tmp_bfd);
goto bkpt_at_symbol;
}
- /* We find the dynamic linker's base address by examining the
- current pc (which point at the entry point for the dynamic
- linker) and subtracting the offset of the entry point. */
- load_addr = read_pc () - tmp_bfd->start_address;
+ /* Now convert the TMP_BFD into a target. That way target, as
+ well as BFD operations can be used. Note that closing the
+ target will also close the underlying bfd. */
+ tmp_bfd_target = target_bfd_reopen (tmp_bfd);
+
+ /* On a running target, we can get the dynamic linker's base
+ address from the shared library table. */
+ solib_add (NULL, 0, NULL, auto_solib_add);
+ so = master_so_list ();
+ while (so)
+ {
+ if (strcmp (buf, so->so_original_name) == 0)
+ {
+ load_addr_found = 1;
+ load_addr = LM_ADDR (so);
+ break;
+ }
+ so = so->next;
+ }
+
+ /* Otherwise we find the dynamic linker's base address by examining
+ the current pc (which should point at the entry point for the
+ dynamic linker) and subtracting the offset of the entry point. */
+ if (!load_addr_found)
+ load_addr = (read_pc ()
+ - exec_entry_point (tmp_bfd, tmp_bfd_target));
/* Record the relocated start and end address of the dynamic linker
- text and plt section for in_svr4_dynsym_resolve_code. */
+ text and plt section for svr4_in_dynsym_resolve_code. */
interp_sect = bfd_get_section_by_name (tmp_bfd, ".text");
if (interp_sect)
{
/* Now try to set a breakpoint in the dynamic linker. */
for (bkpt_namep = solib_break_names; *bkpt_namep != NULL; bkpt_namep++)
{
- sym_addr = bfd_lookup_symbol (tmp_bfd, *bkpt_namep);
+ /* On ABI's that use function descriptors, there are usually
+ two linker symbols associated with each C function: one
+ pointing at the actual entry point of the machine code,
+ and one pointing at the function's descriptor. The
+ latter symbol has the same name as the C function.
+
+ What we're looking for here is the machine code entry
+ point, so we are only interested in symbols in code
+ sections. */
+ sym_addr = bfd_lookup_symbol (tmp_bfd, *bkpt_namep, SEC_CODE);
if (sym_addr != 0)
break;
}
- /* We're done with the temporary bfd. */
- bfd_close (tmp_bfd);
+ /* We're done with both the temporary bfd and target. Remember,
+ closing the target closes the underlying bfd. */
+ target_close (tmp_bfd_target, 0);
if (sym_addr != 0)
{
/* For whatever reason we couldn't set a breakpoint in the dynamic
linker. Warn and drop into the old code. */
bkpt_at_symbol:
- warning ("Unable to find dynamic linker breakpoint function.\nGDB will be unable to debug shared library initializers\nand track explicitly loaded dynamic code.");
+ warning (_("Unable to find dynamic linker breakpoint function.\nGDB will be unable to debug shared library initializers\nand track explicitly loaded dynamic code."));
}
-#endif
/* Scan through the list of symbols, trying to look up the symbol and
set a breakpoint there. Terminate loop when we/if we succeed. */
#endif /* BKPT_AT_SYMBOL */
-#endif /* !SVR4_SHARED_LIBS */
-
return (success);
}
way, we are called to do any system specific symbol handling that
is needed.
- For SunOS4, this consists of grunging around in the dynamic
+ For SunOS4, this consisted of grunging around in the dynamic
linkers structures to find symbol definitions for "common" symbols
and adding them to the minimal symbol table for the runtime common
objfile.
+ However, for SVR4, there's nothing to do.
+
*/
static void
svr4_special_symbol_handling (void)
{
-#ifndef SVR4_SHARED_LIBS
- int j;
-
- if (debug_addr == 0)
- {
- /* Get link_dynamic structure */
-
- j = target_read_memory (debug_base, (char *) &dynamic_copy,
- sizeof (dynamic_copy));
- if (j)
- {
- /* unreadable */
- return;
- }
-
- /* Calc address of debugger interface structure */
- /* FIXME, this needs work for cross-debugging of core files
- (byteorder, size, alignment, etc). */
-
- debug_addr = SOLIB_EXTRACT_ADDRESS (dynamic_copy.ldd);
- }
-
- /* Read the debugger structure from the inferior, just to make sure
- we have a current copy. */
-
- j = target_read_memory (debug_addr, (char *) &debug_copy,
- sizeof (debug_copy));
- if (j)
- return; /* unreadable */
-
- /* Get common symbol definitions for the loaded object. */
-
- if (debug_copy.ldd_cp)
- {
- solib_add_common_symbols (SOLIB_EXTRACT_ADDRESS (debug_copy.ldd_cp));
- }
-
-#endif /* !SVR4_SHARED_LIBS */
}
/* Relocate the main executable. This function should be called upon
interp_sect = bfd_get_section_by_name (exec_bfd, ".interp");
if (interp_sect == NULL
&& (bfd_get_file_flags (exec_bfd) & DYNAMIC) != 0
- && bfd_get_start_address (exec_bfd) != pc)
+ && (exec_entry_point (exec_bfd, &exec_ops) != pc))
{
struct cleanup *old_chain;
struct section_offsets *new_offsets;
The same language also appears in Edition 4.0 of the System V
ABI and is left unspecified in some of the earlier editions. */
- displacement = pc - bfd_get_start_address (exec_bfd);
+ displacement = pc - exec_entry_point (exec_bfd, &exec_ops);
changed = 0;
- new_offsets = xcalloc (sizeof (struct section_offsets),
- symfile_objfile->num_sections);
+ new_offsets = xcalloc (symfile_objfile->num_sections,
+ sizeof (struct section_offsets));
old_chain = make_cleanup (xfree, new_offsets);
for (i = 0; i < symfile_objfile->num_sections; i++)
SYNOPSIS
- void svr4_solib_create_inferior_hook()
+ void svr4_solib_create_inferior_hook ()
DESCRIPTION
/* Relocate the main executable if necessary. */
svr4_relocate_main_executable ();
- /* If we are using the BKPT_AT_SYMBOL code, then we don't need the base
- yet. In fact, in the case of a SunOS4 executable being run on
- Solaris, we can't get it yet. current_sos will get it when it needs
- it. */
-#if !(defined (SVR4_SHARED_LIBS) && defined (BKPT_AT_SYMBOL))
- if ((debug_base = locate_base ()) == 0)
+ if (!svr4_have_link_map_offsets ())
{
- /* Can't find the symbol or the executable is statically linked. */
+ warning (_("no shared library support for this OS / ABI"));
return;
+
}
-#endif
if (!enable_break ())
{
- warning ("shared library handler failed to enable breakpoint");
+ warning (_("shared library handler failed to enable breakpoint"));
return;
}
-#if !defined(SVR4_SHARED_LIBS) || defined(_SCO_DS)
- /* SCO and SunOS need the loop below, other systems should be using the
+#if defined(_SCO_DS)
+ /* SCO needs the loop below, other systems should be using the
special shared library breakpoints and the shared library breakpoint
service routine.
out what we need to know about them. */
clear_proceed_status ();
- stop_soon_quietly = 1;
+ stop_soon = STOP_QUIETLY;
stop_signal = TARGET_SIGNAL_0;
do
{
- target_resume (-1, 0, stop_signal);
+ target_resume (pid_to_ptid (-1), 0, stop_signal);
wait_for_inferior ();
}
while (stop_signal != TARGET_SIGNAL_TRAP);
- stop_soon_quietly = 0;
-
-#if !defined(_SCO_DS)
- /* We are now either at the "mapping complete" breakpoint (or somewhere
- else, a condition we aren't prepared to deal with anyway), so adjust
- the PC as necessary after a breakpoint, disable the breakpoint, and
- add any shared libraries that were mapped in. */
-
- if (DECR_PC_AFTER_BREAK)
- {
- stop_pc -= DECR_PC_AFTER_BREAK;
- write_register (PC_REGNUM, stop_pc);
- }
-
- if (!disable_break ())
- {
- warning ("shared library handler failed to disable breakpoint");
- }
-
- if (auto_solib_add)
- solib_add ((char *) 0, 0, (struct target_ops *) 0);
-#endif /* ! _SCO_DS */
-#endif
+ stop_soon = NO_STOP_QUIETLY;
+#endif /* defined(_SCO_DS) */
}
static void
xfree (so->lm_info);
}
+
+/* Clear any bits of ADDR that wouldn't fit in a target-format
+ data pointer. "Data pointer" here refers to whatever sort of
+ address the dynamic linker uses to manage its sections. At the
+ moment, we don't support shared libraries on any processors where
+ code and data pointers are different sizes.
+
+ This isn't really the right solution. What we really need here is
+ a way to do arithmetic on CORE_ADDR values that respects the
+ natural pointer/address correspondence. (For example, on the MIPS,
+ converting a 32-bit pointer to a 64-bit CORE_ADDR requires you to
+ sign-extend the value. There, simply truncating the bits above
+ TARGET_PTR_BIT, as we do below, is no good.) This should probably
+ be a new gdbarch method or something. */
+static CORE_ADDR
+svr4_truncate_ptr (CORE_ADDR addr)
+{
+ if (TARGET_PTR_BIT == sizeof (CORE_ADDR) * 8)
+ /* We don't need to truncate anything, and the bit twiddling below
+ will fail due to overflow problems. */
+ return addr;
+ else
+ return addr & (((CORE_ADDR) 1 << TARGET_PTR_BIT) - 1);
+}
+
+
static void
svr4_relocate_section_addresses (struct so_list *so,
struct section_table *sec)
{
- sec->addr += LM_ADDR (so);
- sec->endaddr += LM_ADDR (so);
+ sec->addr = svr4_truncate_ptr (sec->addr + LM_ADDR (so));
+ sec->endaddr = svr4_truncate_ptr (sec->endaddr + LM_ADDR (so));
}
+\f
+
+/* Architecture-specific operations. */
+
+/* Per-architecture data key. */
+static struct gdbarch_data *solib_svr4_data;
+
+struct solib_svr4_ops
+{
+ /* Return a description of the layout of `struct link_map'. */
+ struct link_map_offsets *(*fetch_link_map_offsets)(void);
+};
+
+/* Return a default for the architecture-specific operations. */
+
+static void *
+solib_svr4_init (struct obstack *obstack)
+{
+ struct solib_svr4_ops *ops;
+
+ ops = OBSTACK_ZALLOC (obstack, struct solib_svr4_ops);
+ ops->fetch_link_map_offsets = legacy_svr4_fetch_link_map_offsets_hook;
+ return ops;
+}
+
+/* Set the architecture-specific `struct link_map_offsets' fetcher for
+ GDBARCH to FLMO. */
+
+void
+set_solib_svr4_fetch_link_map_offsets (struct gdbarch *gdbarch,
+ struct link_map_offsets *(*flmo) (void))
+{
+ struct solib_svr4_ops *ops = gdbarch_data (gdbarch, solib_svr4_data);
+
+ ops->fetch_link_map_offsets = flmo;
+}
+
+/* Fetch a link_map_offsets structure using the architecture-specific
+ `struct link_map_offsets' fetcher. */
+
+static struct link_map_offsets *
+svr4_fetch_link_map_offsets (void)
+{
+ struct solib_svr4_ops *ops = gdbarch_data (current_gdbarch, solib_svr4_data);
+
+ gdb_assert (ops->fetch_link_map_offsets);
+ return ops->fetch_link_map_offsets ();
+}
+
+/* Return 1 if a link map offset fetcher has been defined, 0 otherwise. */
+
+static int
+svr4_have_link_map_offsets (void)
+{
+ struct solib_svr4_ops *ops = gdbarch_data (current_gdbarch, solib_svr4_data);
+ return (ops->fetch_link_map_offsets != NULL);
+}
+\f
+
+/* Most OS'es that have SVR4-style ELF dynamic libraries define a
+ `struct r_debug' and a `struct link_map' that are binary compatible
+ with the origional SVR4 implementation. */
+
+/* Fetch (and possibly build) an appropriate `struct link_map_offsets'
+ for an ILP32 SVR4 system. */
+
+struct link_map_offsets *
+svr4_ilp32_fetch_link_map_offsets (void)
+{
+ static struct link_map_offsets lmo;
+ static struct link_map_offsets *lmp = NULL;
+
+ if (lmp == NULL)
+ {
+ lmp = &lmo;
+
+ /* Everything we need is in the first 8 bytes. */
+ lmo.r_debug_size = 8;
+ lmo.r_map_offset = 4;
+ lmo.r_map_size = 4;
+
+ /* Everything we need is in the first 20 bytes. */
+ lmo.link_map_size = 20;
+ lmo.l_addr_offset = 0;
+ lmo.l_addr_size = 4;
+ lmo.l_name_offset = 4;
+ lmo.l_name_size = 4;
+ lmo.l_next_offset = 12;
+ lmo.l_next_size = 4;
+ lmo.l_prev_offset = 16;
+ lmo.l_prev_size = 4;
+ }
+
+ return lmp;
+}
+
+/* Fetch (and possibly build) an appropriate `struct link_map_offsets'
+ for an LP64 SVR4 system. */
+
+struct link_map_offsets *
+svr4_lp64_fetch_link_map_offsets (void)
+{
+ static struct link_map_offsets lmo;
+ static struct link_map_offsets *lmp = NULL;
+
+ if (lmp == NULL)
+ {
+ lmp = &lmo;
+
+ /* Everything we need is in the first 16 bytes. */
+ lmo.r_debug_size = 16;
+ lmo.r_map_offset = 8;
+ lmo.r_map_size = 8;
+
+ /* Everything we need is in the first 40 bytes. */
+ lmo.link_map_size = 40;
+ lmo.l_addr_offset = 0;
+ lmo.l_addr_size = 8;
+ lmo.l_name_offset = 8;
+ lmo.l_name_size = 8;
+ lmo.l_next_offset = 24;
+ lmo.l_next_size = 8;
+ lmo.l_prev_offset = 32;
+ lmo.l_prev_size = 8;
+ }
+
+ return lmp;
+}
+\f
static struct target_so_ops svr4_so_ops;
+extern initialize_file_ftype _initialize_svr4_solib; /* -Wmissing-prototypes */
+
void
_initialize_svr4_solib (void)
{
+ solib_svr4_data = gdbarch_data_register_pre_init (solib_svr4_init);
+
svr4_so_ops.relocate_section_addresses = svr4_relocate_section_addresses;
svr4_so_ops.free_so = svr4_free_so;
svr4_so_ops.clear_solib = svr4_clear_solib;
svr4_so_ops.special_symbol_handling = svr4_special_symbol_handling;
svr4_so_ops.current_sos = svr4_current_sos;
svr4_so_ops.open_symbol_file_object = open_symbol_file_object;
+ svr4_so_ops.in_dynsym_resolve_code = svr4_in_dynsym_resolve_code;
/* FIXME: Don't do this here. *_gdbarch_init() should set so_ops. */
current_target_so_ops = &svr4_so_ops;
}
-