#include "ui-out.h"
#include "readline/readline.h"
-#ifdef CRLF_SOURCE_FILES
-
-/* Define CRLF_SOURCE_FILES in an xm-*.h file if source files on the
- host use \r\n rather than just \n. Defining CRLF_SOURCE_FILES is
- much faster than defining LSEEK_NOT_LINEAR. */
-
#ifndef O_BINARY
#define O_BINARY 0
#endif
#define OPEN_MODE (O_RDONLY | O_BINARY)
#define FDOPEN_MODE FOPEN_RB
-#else /* ! defined (CRLF_SOURCE_FILES) */
-
-#define OPEN_MODE O_RDONLY
-#define FDOPEN_MODE FOPEN_RT
-
-#endif /* ! defined (CRLF_SOURCE_FILES) */
-
/* Prototypes for exported functions. */
void _initialize_source (void);
things are wrapping, but that would be a fair amount of work. */
int lines_to_list = 10;
+static void
+show_lines_to_list (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Number of source lines gdb will list by default is %s.\n"),
+ value);
+}
/* Line number of last line printed. Default for various commands.
current_source_line is usually, but not always, the same as this. */
struct symtab_and_line cursal;
if (!have_full_symbols () && !have_partial_symbols ())
- error ("No symbol table is loaded. Use the \"file\" command.");
+ error (_("No symbol table is loaded. Use the \"file\" command."));
/* Pull in a current source symtab if necessary */
if (current_source_symtab == 0)
if (cs_pst->readin)
{
internal_error (__FILE__, __LINE__,
- "select_source_symtab: "
- "readin pst found and no symtabs.");
+ _("select_source_symtab: "
+ "readin pst found and no symtabs."));
}
else
{
if (current_source_symtab)
return;
- error ("Can't find a default source file");
+ error (_("Can't find a default source file"));
}
\f
static void
/* FIXME, this goes to "delete dir"... */
if (dirname == 0)
{
- if (from_tty && query ("Reinitialize source path to empty? "))
+ if (from_tty && query (_("Reinitialize source path to empty? ")))
{
xfree (source_path);
init_source_path ();
print_sys_errmsg (name, save_errno);
}
else if ((st.st_mode & S_IFMT) != S_IFDIR)
- warning ("%s is not a directory.", name);
+ warning (_("%s is not a directory."), name);
}
append:
if (!s)
{
- printf_filtered ("No current source file.\n");
+ printf_filtered (_("No current source file.\n"));
return;
}
- printf_filtered ("Current source file is %s\n", s->filename);
+ printf_filtered (_("Current source file is %s\n"), s->filename);
if (s->dirname)
- printf_filtered ("Compilation directory is %s\n", s->dirname);
+ printf_filtered (_("Compilation directory is %s\n"), s->dirname);
if (s->fullname)
- printf_filtered ("Located in %s\n", s->fullname);
+ printf_filtered (_("Located in %s\n"), s->fullname);
if (s->nlines)
- printf_filtered ("Contains %d line%s.\n", s->nlines,
+ printf_filtered (_("Contains %d line%s.\n"), s->nlines,
s->nlines == 1 ? "" : "s");
- printf_filtered ("Source language is %s.\n", language_str (s->language));
- printf_filtered ("Compiled with %s debugging format.\n", s->debugformat);
- printf_filtered ("%s preprocessor macro info.\n",
+ printf_filtered (_("Source language is %s.\n"), language_str (s->language));
+ printf_filtered (_("Compiled with %s debugging format.\n"), s->debugformat);
+ printf_filtered (_("%s preprocessor macro info.\n"),
s->macro_table ? "Includes" : "Does not include");
}
\f
if (!path)
path = ".";
-#if defined(_WIN32) || defined(__CYGWIN__)
mode |= O_BINARY;
-#endif
if ((opts & OPF_TRY_CWD_FIRST) || IS_ABSOLUTE_PATH (string))
{
{
char *tmp_fullname;
tmp_fullname = *fullname;
- *fullname = mstrsave (objfile->md, *fullname);
+ *fullname = xstrdup (tmp_fullname);
xfree (tmp_fullname);
}
return result;
mtime = bfd_get_mtime (exec_bfd);
if (mtime && mtime < st.st_mtime)
- {
- warning ("Source file is more recent than executable.\n");
- }
+ warning (_("Source file is more recent than executable."));
#ifdef LSEEK_NOT_LINEAR
{
if (line < 1 || line > s->nlines)
{
close (desc);
- error ("Line number %d out of range; %s has %d lines.",
+ error (_("Line number %d out of range; %s has %d lines."),
line, s->filename, s->nlines);
}
}
else if (c == 0177)
ui_out_text (uiout, "^?");
-#ifdef CRLF_SOURCE_FILES
else if (c == '\r')
{
/* Skip a \r character, but only before a \n. */
if (c1 != EOF)
ungetc (c1, stream);
}
-#endif
else
{
sprintf (buf, "%c", c);
if (sal.symtab == 0)
{
- printf_filtered ("No line number information available");
+ printf_filtered (_("No line number information available"));
if (sal.pc != 0)
{
/* This is useful for "info line *0x7f34". If we can't tell the
/* Is there any case in which we get here, and have an address
which the user would want to see? If we have debugging symbols
and no line numbers? */
- printf_filtered ("Line number %d is out of range for \"%s\".\n",
+ printf_filtered (_("Line number %d is out of range for \"%s\".\n"),
sal.line, sal.symtab->filename);
}
xfree (sals.sals);
msg = (char *) re_comp (regex);
if (msg)
- error ("%s", msg);
+ error (("%s"), msg);
if (current_source_symtab == 0)
select_source_symtab (0);
if (line < 1 || line > current_source_symtab->nlines)
{
close (desc);
- error ("Expression not found");
+ error (_("Expression not found"));
}
if (lseek (desc, current_source_symtab->line_charpos[line - 1], 0) < 0)
}
while (c != '\n' && (c = getc (stream)) >= 0);
-#ifdef CRLF_SOURCE_FILES
/* Remove the \r, if any, at the end of the line, otherwise
regular expressions that end with $ or \n won't work. */
if (p - buf > 1 && p[-2] == '\r')
p--;
p[-1] = '\n';
}
-#endif
/* we now have a source line in buf, null terminate and match */
*p = 0;
line++;
}
- printf_filtered ("Expression not found\n");
+ printf_filtered (_("Expression not found\n"));
fclose (stream);
}
msg = (char *) re_comp (regex);
if (msg)
- error ("%s", msg);
+ error (("%s"), msg);
if (current_source_symtab == 0)
select_source_symtab (0);
if (line < 1 || line > current_source_symtab->nlines)
{
close (desc);
- error ("Expression not found");
+ error (_("Expression not found"));
}
if (lseek (desc, current_source_symtab->line_charpos[line - 1], 0) < 0)
}
while (c != '\n' && (c = getc (stream)) >= 0);
-#ifdef CRLF_SOURCE_FILES
/* Remove the \r, if any, at the end of the line, otherwise
regular expressions that end with $ or \n won't work. */
if (p - buf > 1 && p[-2] == '\r')
p--;
p[-1] = '\n';
}
-#endif
/* We now have a source line in buf; null terminate and match. */
*p = 0;
}
}
- printf_filtered ("Expression not found\n");
+ printf_filtered (_("Expression not found\n"));
fclose (stream);
return;
}
just an approximation. */
re_set_syntax (RE_SYNTAX_GREP);
- c = add_cmd ("directory", class_files, directory_command,
- "Add directory DIR to beginning of search path for source files.\n\
+ c = add_cmd ("directory", class_files, directory_command, _("\
+Add directory DIR to beginning of search path for source files.\n\
Forget cached info on source file locations and line positions.\n\
DIR can also be $cwd for the current working directory, or $cdir for the\n\
directory in which the source file was compiled into object code.\n\
-With no argument, reset the search path to $cdir:$cwd, the default.",
+With no argument, reset the search path to $cdir:$cwd, the default."),
&cmdlist);
if (dbx_commands)
set_cmd_completer (c, filename_completer);
- add_cmd ("directories", no_class, show_directories,
- "Current search path for finding source files.\n\
+ add_cmd ("directories", no_class, show_directories, _("\
+Current search path for finding source files.\n\
$cwd in the path means the current working directory.\n\
-$cdir in the path means the compilation directory of the source file.",
+$cdir in the path means the compilation directory of the source file."),
&showlist);
if (xdb_commands)
{
add_com_alias ("D", "directory", class_files, 0);
- add_cmd ("ld", no_class, show_directories,
- "Current search path for finding source files.\n\
+ add_cmd ("ld", no_class, show_directories, _("\
+Current search path for finding source files.\n\
$cwd in the path means the current working directory.\n\
-$cdir in the path means the compilation directory of the source file.",
+$cdir in the path means the compilation directory of the source file."),
&cmdlist);
}
add_info ("source", source_info,
- "Information about the current source file.");
+ _("Information about the current source file."));
- add_info ("line", line_info,
- concat ("Core addresses of the code for a source line.\n\
+ add_info ("line", line_info, _("\
+Core addresses of the code for a source line.\n\
Line can be specified as\n\
LINENUM, to list around that line in current file,\n\
FILE:LINENUM, to list around that line in that file,\n\
FUNCTION, to list around beginning of that function,\n\
FILE:FUNCTION, to distinguish among like-named static functions.\n\
-", "\
Default is to describe the last source line that was listed.\n\n\
This sets the default address for \"x\" to the line's first instruction\n\
so that \"x/i\" suffices to start examining the machine code.\n\
-The address is also stored as the value of \"$_\".", NULL));
+The address is also stored as the value of \"$_\"."));
- add_com ("forward-search", class_files, forward_search_command,
- "Search for regular expression (see regex(3)) from last line listed.\n\
-The matching line number is also stored as the value of \"$_\".");
+ add_com ("forward-search", class_files, forward_search_command, _("\
+Search for regular expression (see regex(3)) from last line listed.\n\
+The matching line number is also stored as the value of \"$_\"."));
add_com_alias ("search", "forward-search", class_files, 0);
- add_com ("reverse-search", class_files, reverse_search_command,
- "Search backward for regular expression (see regex(3)) from last line listed.\n\
-The matching line number is also stored as the value of \"$_\".");
+ add_com ("reverse-search", class_files, reverse_search_command, _("\
+Search backward for regular expression (see regex(3)) from last line listed.\n\
+The matching line number is also stored as the value of \"$_\"."));
if (xdb_commands)
{
add_com_alias ("?", "reverse-search", class_files, 0);
}
- deprecated_add_show_from_set
- (add_set_cmd ("listsize", class_support, var_uinteger,
- (char *) &lines_to_list,
- "Set number of source lines gdb will list by default.",
- &setlist),
- &showlist);
+ add_setshow_uinteger_cmd ("listsize", class_support, &lines_to_list, _("\
+Set number of source lines gdb will list by default."), _("\
+Show number of source lines gdb will list by default."), NULL,
+ NULL,
+ show_lines_to_list,
+ &setlist, &showlist);
}