/* Target-dependent code for GNU/Linux SPARC.
- Copyright 2003, 2004 Free Software Foundation, Inc.
+ Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "floatformat.h"
#include "solib-svr4.h"
#include "symtab.h"
#include "trad-frame.h"
-
-#include "gdb_assert.h"
-#include "gdb_string.h"
+#include "tramp-frame.h"
#include "sparc-tdep.h"
-/* Recognizing signal handler frames. */
+/* Signal trampoline support. */
+
+static void sparc32_linux_sigframe_init (const struct tramp_frame *self,
+ struct frame_info *next_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func);
/* GNU/Linux has two flavors of signals. Normal signal handlers, and
"realtime" (RT) signals. The RT signals can provide additional
/* When the sparc Linux kernel calls a signal handler and the
SA_RESTORER flag isn't set, the return address points to a bit of
- code on the stack. This function returns whether the PC appears to
- be within this bit of code.
-
- The instruction sequence for normal signals is
- mov __NR_sigreturn, %g1 ! hex: 0x821020d8
- ta 0x10 ! hex: 0x91d02010
+ code on the stack. This code checks whether the PC appears to be
+ within this bit of code.
+ The instruction sequence for normal signals is encoded below.
Checking for the code sequence should be somewhat reliable, because
the effect is to call the system call sigreturn. This is unlikely
- to occur anywhere other than a signal trampoline.
-
- It kind of sucks that we have to read memory from the process in
- order to identify a signal trampoline, but there doesn't seem to be
- any other way. However, sparc32_linux_pc_in_sigtramp arranges to
- only call us if no function name could be identified, which should
- be the case since the code is on the stack. */
-
-#define LINUX32_SIGTRAMP_INSN0 0x821020d8 /* mov __NR_sigreturn, %g1 */
-#define LINUX32_SIGTRAMP_INSN1 0x91d02010 /* ta 0x10 */
-
-/* The instruction sequence for RT signals is
- mov __NR_rt_sigreturn, %g1 ! hex: 0x82102065
- ta {0x10,0x6d} ! hex: 0x91d02010 or 0x91d0206d
-
- The effect is to call the system call rt_sigreturn. The trap number
- is variable based upon whether this is a 32-bit or 64-bit sparc binary.
- Note that 64-bit binaries only use this RT signal return method. */
-
-#define LINUX32_RT_SIGTRAMP_INSN0 0x82102065
-#define LINUX32_RT_SIGTRAMP_INSN1 0x91d02010
-
-/* If PC is in a sigtramp routine consisting of the instructions INSN0
- and INSN1, return the address of the start of the routine.
- Otherwise, return 0. */
-
-CORE_ADDR
-sparc_linux_sigtramp_start (struct frame_info *next_frame,
- ULONGEST insn0, ULONGEST insn1)
-{
- CORE_ADDR pc = frame_pc_unwind (next_frame);
- ULONGEST word0, word1;
- unsigned char buf[8]; /* Two instructions. */
-
- /* We only recognize a signal trampoline if PC is at the start of
- one of the instructions. We optimize for finding the PC at the
- start of the instruction sequence, as will be the case when the
- trampoline is not the first frame on the stack. We assume that
- in the case where the PC is not at the start of the instruction
- sequence, there will be a few trailing readable bytes on the
- stack. */
-
- if (!safe_frame_unwind_memory (next_frame, pc, buf, sizeof buf))
- return 0;
-
- word0 = extract_unsigned_integer (buf, 4);
- if (word0 != insn0)
- {
- if (word0 != insn1)
- return 0;
-
- pc -= 4;
- if (!safe_frame_unwind_memory (next_frame, pc, buf, sizeof buf))
- return 0;
+ to occur anywhere other than a signal trampoline. */
- word0 = extract_unsigned_integer (buf, 4);
- }
-
- word1 = extract_unsigned_integer (buf + 4, 4);
- if (word0 != insn0 || word1 != insn1)
- return 0;
-
- return pc;
-}
-
-static CORE_ADDR
-sparc32_linux_sigtramp_start (struct frame_info *next_frame)
+static const struct tramp_frame sparc32_linux_sigframe =
{
- return sparc_linux_sigtramp_start (next_frame, LINUX32_SIGTRAMP_INSN0,
- LINUX32_SIGTRAMP_INSN1);
-}
+ SIGTRAMP_FRAME,
+ 4,
+ {
+ { 0x821020d8, -1 }, /* mov __NR_sugreturn, %g1 */
+ { 0x91d02010, -1 }, /* ta 0x10 */
+ { TRAMP_SENTINEL_INSN, -1 }
+ },
+ sparc32_linux_sigframe_init
+};
-static CORE_ADDR
-sparc32_linux_rt_sigtramp_start (struct frame_info *next_frame)
-{
- return sparc_linux_sigtramp_start (next_frame, LINUX32_RT_SIGTRAMP_INSN0,
- LINUX32_RT_SIGTRAMP_INSN1);
-}
+/* The instruction sequence for RT signals is slightly different. The
+ effect is to call the system call rt_sigreturn. */
-static int
-sparc32_linux_sigtramp_p (struct frame_info *next_frame)
+static const struct tramp_frame sparc32_linux_rt_sigframe =
{
- CORE_ADDR pc = frame_pc_unwind (next_frame);
- char *name;
-
- find_pc_partial_function (pc, &name, NULL, NULL);
-
- /* If we have NAME, we can optimize the search. The trampolines are
- named __sigreturn_stub and __rt_sigreturn_stub. However, they
- aren't dynamically exported from the shared C library, so the
- trampoline may appear to be part of the preceding function. This
- should always be sigaction, __sigaction, or __libc_sigaction (all
- aliases to the same function). */
- if (name == NULL || strstr (name, "sigaction") != NULL)
- return (sparc32_linux_sigtramp_start (next_frame) != 0
- || sparc32_linux_rt_sigtramp_start (next_frame) != 0);
-
- return (strcmp ("__sigreturn_stub", name) == 0
- || strcmp ("__rt_sigreturn_stub", name) == 0);
-}
+ SIGTRAMP_FRAME,
+ 4,
+ {
+ { 0x82102065, -1 }, /* mov __NR_rt_sigreturn, %g1 */
+ { 0x91d02010, -1 }, /* ta 0x10 */
+ { TRAMP_SENTINEL_INSN, -1 }
+ },
+ sparc32_linux_sigframe_init
+};
-static struct sparc_frame_cache *
-sparc32_linux_sigtramp_frame_cache (struct frame_info *next_frame,
- void **this_cache)
+static void
+sparc32_linux_sigframe_init (const struct tramp_frame *self,
+ struct frame_info *next_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func)
{
- struct sparc_frame_cache *cache;
- CORE_ADDR sigcontext_addr, addr;
+ CORE_ADDR base, addr;
int regnum;
- if (*this_cache)
- return *this_cache;
-
- cache = sparc32_frame_cache (next_frame, this_cache);
- gdb_assert (cache == *this_cache);
+ base = frame_unwind_register_unsigned (next_frame, SPARC_O1_REGNUM);
+ if (self == &sparc32_linux_rt_sigframe)
+ base += 128;
- /* ??? What about signal trampolines that aren't frameless? */
- regnum = SPARC_SP_REGNUM;
- cache->base = frame_unwind_register_unsigned (next_frame, regnum);
+ /* Offsets from <bits/sigcontext.h>. */
- regnum = SPARC_O1_REGNUM;
- sigcontext_addr = frame_unwind_register_unsigned (next_frame, regnum);
+ trad_frame_set_reg_addr (this_cache, SPARC32_PSR_REGNUM, base + 0);
+ trad_frame_set_reg_addr (this_cache, SPARC32_PC_REGNUM, base + 4);
+ trad_frame_set_reg_addr (this_cache, SPARC32_NPC_REGNUM, base + 8);
+ trad_frame_set_reg_addr (this_cache, SPARC32_Y_REGNUM, base + 12);
- addr = sparc32_linux_sigtramp_start (next_frame);
- if (addr == 0)
+ /* Since %g0 is always zero, keep the identity encoding. */
+ addr = base + 20;
+ for (regnum = SPARC_G1_REGNUM; regnum <= SPARC_O7_REGNUM; regnum++)
{
- /* If this is a RT signal trampoline, adjust SIGCONTEXT_ADDR
- accordingly. */
- addr = sparc32_linux_rt_sigtramp_start (next_frame);
- if (addr)
- sigcontext_addr += 128;
- else
- addr = frame_func_unwind (next_frame);
+ trad_frame_set_reg_addr (this_cache, regnum, addr);
+ addr += 4;
}
- cache->pc = addr;
-
- cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
-
- /* Offsets from <bits/sigcontext.h> */
-
- cache->saved_regs[SPARC32_PSR_REGNUM].addr = sigcontext_addr + 0;
- cache->saved_regs[SPARC32_PC_REGNUM].addr = sigcontext_addr + 4;
- cache->saved_regs[SPARC32_NPC_REGNUM].addr = sigcontext_addr + 8;
- cache->saved_regs[SPARC32_Y_REGNUM].addr = sigcontext_addr + 12;
-
- /* Since %g0 is always zero, keep the identity encoding. */
- for (regnum = SPARC_G1_REGNUM, addr = sigcontext_addr + 20;
- regnum <= SPARC_O7_REGNUM; regnum++, addr += 4)
- cache->saved_regs[regnum].addr = addr;
-
- for (regnum = SPARC_L0_REGNUM, addr = cache->base;
- regnum <= SPARC_I7_REGNUM; regnum++, addr += 4)
- cache->saved_regs[regnum].addr = addr;
-
- return cache;
-}
-
-static void
-sparc32_linux_sigtramp_frame_this_id (struct frame_info *next_frame,
- void **this_cache,
- struct frame_id *this_id)
-{
- struct sparc_frame_cache *cache =
- sparc32_linux_sigtramp_frame_cache (next_frame, this_cache);
-
- (*this_id) = frame_id_build (cache->base, cache->pc);
-}
-static void
-sparc32_linux_sigtramp_frame_prev_register (struct frame_info *next_frame,
- void **this_cache,
- int regnum, int *optimizedp,
- enum lval_type *lvalp,
- CORE_ADDR *addrp,
- int *realnump, void *valuep)
-{
- struct sparc_frame_cache *cache =
- sparc32_linux_sigtramp_frame_cache (next_frame, this_cache);
-
- trad_frame_get_prev_register (next_frame, cache->saved_regs, regnum,
- optimizedp, lvalp, addrp, realnump, valuep);
-}
-
-static const struct frame_unwind sparc32_linux_sigtramp_frame_unwind =
-{
- SIGTRAMP_FRAME,
- sparc32_linux_sigtramp_frame_this_id,
- sparc32_linux_sigtramp_frame_prev_register
-};
-
-static const struct frame_unwind *
-sparc32_linux_sigtramp_frame_sniffer (struct frame_info *next_frame)
-{
- if (sparc32_linux_sigtramp_p (next_frame))
- return &sparc32_linux_sigtramp_frame_unwind;
-
- return NULL;
+ base = addr = frame_unwind_register_unsigned (next_frame, SPARC_SP_REGNUM);
+ for (regnum = SPARC_L0_REGNUM; regnum <= SPARC_I7_REGNUM; regnum++)
+ {
+ trad_frame_set_reg_addr (this_cache, regnum, addr);
+ addr += 4;
+ }
+ trad_frame_set_id (this_cache, frame_id_build (base, func));
}
\f
static void
sparc32_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
- /* GNU/Linux is very similar to Solaris ... */
- sparc32_sol2_init_abi (info, gdbarch);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ tramp_frame_prepend_unwinder (gdbarch, &sparc32_linux_sigframe);
+ tramp_frame_prepend_unwinder (gdbarch, &sparc32_linux_rt_sigframe);
- /* ... but doesn't have kernel-assisted single-stepping support. */
- set_gdbarch_software_single_step (gdbarch, sparc_software_single_step);
+ /* GNU/Linux has SVR4-style shared libraries... */
+ set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
+ set_solib_svr4_fetch_link_map_offsets
+ (gdbarch, svr4_ilp32_fetch_link_map_offsets);
+
+ /* ...which means that we need some special handling when doing
+ prologue analysis. */
+ tdep->plt_entry_size = 12;
/* GNU/Linux doesn't support the 128-bit `long double' from the psABI. */
set_gdbarch_long_double_bit (gdbarch, 64);
set_gdbarch_long_double_format (gdbarch, &floatformat_ieee_double_big);
- frame_unwind_append_sniffer (gdbarch, sparc32_linux_sigtramp_frame_sniffer);
-
/* Enable TLS support. */
set_gdbarch_fetch_tls_load_module_address (gdbarch,
svr4_fetch_objfile_link_map);