/* Target-dependent code for the SPARC for GDB, the GNU debugger.
- Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+/* ??? Support for calling functions from gdb in sparc64 is unfinished. */
#include "defs.h"
#include "frame.h"
#include "obstack.h"
#include "target.h"
#include "value.h"
-
-#include "symfile.h" /* for objfiles.h */
-#include "objfiles.h" /* for find_pc_section */
+#include "bfd.h"
+#include "gdb_string.h"
#ifdef USE_PROC_FS
#include <sys/procfs.h>
#include "gdbcore.h"
+#ifdef GDB_TARGET_IS_SPARC64
+#define FP_REGISTER_BYTES (64 * 4)
+#else
+#define FP_REGISTER_BYTES (32 * 4)
+#endif
+
+/* If not defined, assume 32 bit sparc. */
+#ifndef FP_MAX_REGNUM
+#define FP_MAX_REGNUM (FP0_REGNUM + 32)
+#endif
+
+#define SPARC_INTREG_SIZE (REGISTER_RAW_SIZE (G0_REGNUM))
+
/* From infrun.c */
extern int stop_after_trap;
int deferred_stores = 0; /* Cumulates stores we want to do eventually. */
+/* Branches with prediction are treated like their non-predicting cousins. */
+/* FIXME: What about floating point branches? */
+
+/* Macros to extract fields from sparc instructions. */
+#define X_OP(i) (((i) >> 30) & 0x3)
+#define X_RD(i) (((i) >> 25) & 0x1f)
+#define X_A(i) (((i) >> 29) & 1)
+#define X_COND(i) (((i) >> 25) & 0xf)
+#define X_OP2(i) (((i) >> 22) & 0x7)
+#define X_IMM22(i) ((i) & 0x3fffff)
+#define X_OP3(i) (((i) >> 19) & 0x3f)
+#define X_RS1(i) (((i) >> 14) & 0x1f)
+#define X_I(i) (((i) >> 13) & 1)
+#define X_IMM13(i) ((i) & 0x1fff)
+/* Sign extension macros. */
+#define X_SIMM13(i) ((X_IMM13 (i) ^ 0x1000) - 0x1000)
+#define X_DISP22(i) ((X_IMM22 (i) ^ 0x200000) - 0x200000)
+#define X_CC(i) (((i) >> 20) & 3)
+#define X_P(i) (((i) >> 19) & 1)
+#define X_DISP19(i) ((((i) & 0x7ffff) ^ 0x40000) - 0x40000)
+#define X_RCOND(i) (((i) >> 25) & 7)
+#define X_DISP16(i) ((((((i) >> 6) && 0xc000) | ((i) & 0x3fff)) ^ 0x8000) - 0x8000)
+#define X_FCN(i) (((i) >> 25) & 31)
+
typedef enum
{
- Error, not_branch, bicc, bicca, ba, baa, ticc, ta
+ Error, not_branch, bicc, bicca, ba, baa, ticc, ta,
+#ifdef GDB_TARGET_IS_SPARC64
+ done_retry
+#endif
} branch_type;
/* Simulate single-step ptrace call for sun4. Code written by Gary
int one_stepped;
+static branch_type isbranch PARAMS ((long, CORE_ADDR, CORE_ADDR *));
+
/* single_step() is called just before we want to resume the inferior,
if we want to single-step it but there is no hardware or kernel single-step
support (as on all SPARCs). We find all the possible targets of the
void
single_step (ignore)
- int ignore; /* pid, but we don't need it */
+ enum target_signal ignore; /* pid, but we don't need it */
{
- branch_type br, isannulled();
+ branch_type br;
CORE_ADDR pc;
long pc_instruction;
/* printf_unfiltered ("set break at %x\n",next_pc); */
pc = read_register (PC_REGNUM);
- pc_instruction = read_memory_integer (pc, sizeof(pc_instruction));
- br = isannulled (pc_instruction, pc, &target);
+ pc_instruction = read_memory_integer (pc, 4);
+ br = isbranch (pc_instruction, pc, &target);
brknpc4 = brktrg = 0;
if (br == bicca)
brktrg = 1;
target_insert_breakpoint (target, break_mem[2]);
}
+#ifdef GDB_TARGET_IS_SPARC64
+ else if (br == done_retry)
+ {
+ brktrg = 1;
+ target_insert_breakpoint (target, break_mem[2]);
+ }
+#endif
/* We are ready to let it go */
one_stepped = 1;
}
}
\f
-CORE_ADDR
-sparc_frame_chain (thisframe)
- FRAME thisframe;
+/* Call this for each newly created frame. For SPARC, we need to calculate
+ the bottom of the frame, and do some extra work if the prologue
+ has been generated via the -mflat option to GCC. In particular,
+ we need to know where the previous fp and the pc have been stashed,
+ since their exact position within the frame may vary. */
+
+void
+sparc_init_extra_frame_info (fromleaf, fi)
+ int fromleaf;
+ struct frame_info *fi;
{
- char buf[MAX_REGISTER_RAW_SIZE];
- int err;
+ char *name;
CORE_ADDR addr;
+ int insn;
- addr = thisframe->frame + FRAME_SAVED_I0 +
- REGISTER_RAW_SIZE (FP_REGNUM) * (FP_REGNUM - I0_REGNUM);
- err = target_read_memory (addr, buf, REGISTER_RAW_SIZE (FP_REGNUM));
- if (err)
- return 0;
- return extract_address (buf, REGISTER_RAW_SIZE (FP_REGNUM));
+ fi->bottom =
+ (fi->next ?
+ (fi->frame == fi->next->frame ? fi->next->bottom : fi->next->frame) :
+ read_register (SP_REGNUM));
+
+ /* If fi->next is NULL, then we already set ->frame by passing read_fp()
+ to create_new_frame. */
+ if (fi->next)
+ {
+ char buf[MAX_REGISTER_RAW_SIZE];
+
+ /* Compute ->frame as if not flat. If it is flat, we'll change
+ it later. */
+ if (fi->next->next != NULL
+ && (fi->next->next->signal_handler_caller
+ || frame_in_dummy (fi->next->next))
+ && frameless_look_for_prologue (fi->next))
+ {
+ /* A frameless function interrupted by a signal did not change
+ the frame pointer, fix up frame pointer accordingly. */
+ fi->frame = FRAME_FP (fi->next);
+ fi->bottom = fi->next->bottom;
+ }
+ else
+ {
+ get_saved_register (buf, 0, 0, fi, FP_REGNUM, 0);
+ fi->frame = extract_address (buf, REGISTER_RAW_SIZE (FP_REGNUM));
+ }
+ }
+
+ /* Decide whether this is a function with a ``flat register window''
+ frame. For such functions, the frame pointer is actually in %i7. */
+ fi->flat = 0;
+ if (find_pc_partial_function (fi->pc, &name, &addr, NULL))
+ {
+ /* See if the function starts with an add (which will be of a
+ negative number if a flat frame) to the sp. FIXME: Does not
+ handle large frames which will need more than one instruction
+ to adjust the sp. */
+ insn = read_memory_integer (addr, 4);
+ if (X_OP (insn) == 2 && X_RD (insn) == 14 && X_OP3 (insn) == 0
+ && X_I (insn) && X_SIMM13 (insn) < 0)
+ {
+ int offset = X_SIMM13 (insn);
+
+ /* Then look for a save of %i7 into the frame. */
+ insn = read_memory_integer (addr + 4, 4);
+ if (X_OP (insn) == 3
+ && X_RD (insn) == 31
+ && X_OP3 (insn) == 4
+ && X_RS1 (insn) == 14)
+ {
+ char buf[MAX_REGISTER_RAW_SIZE];
+
+ /* We definitely have a flat frame now. */
+ fi->flat = 1;
+
+ fi->sp_offset = offset;
+
+ /* Overwrite the frame's address with the value in %i7. */
+ get_saved_register (buf, 0, 0, fi, I7_REGNUM, 0);
+ fi->frame = extract_address (buf, REGISTER_RAW_SIZE (I7_REGNUM));
+
+ /* Record where the fp got saved. */
+ fi->fp_addr = fi->frame + fi->sp_offset + X_SIMM13 (insn);
+
+ /* Also try to collect where the pc got saved to. */
+ fi->pc_addr = 0;
+ insn = read_memory_integer (addr + 12, 4);
+ if (X_OP (insn) == 3
+ && X_RD (insn) == 15
+ && X_OP3 (insn) == 4
+ && X_RS1 (insn) == 14)
+ fi->pc_addr = fi->frame + fi->sp_offset + X_SIMM13 (insn);
+ }
+ }
+ }
+ if (fi->next && fi->frame == 0)
+ {
+ /* Kludge to cause init_prev_frame_info to destroy the new frame. */
+ fi->frame = fi->next->frame;
+ fi->pc = fi->next->pc;
+ }
+}
+
+CORE_ADDR
+sparc_frame_chain (frame)
+ struct frame_info *frame;
+{
+ /* Value that will cause FRAME_CHAIN_VALID to not worry about the chain
+ value. If it realy is zero, we detect it later in
+ sparc_init_prev_frame. */
+ return (CORE_ADDR)1;
}
CORE_ADDR
sparc_extract_struct_value_address (regbuf)
char regbuf[REGISTER_BYTES];
{
- return read_memory_integer (((int *)(regbuf))[SP_REGNUM]+(16*4),
+#ifdef GDB_TARGET_IS_SPARC64
+ return extract_address (regbuf + REGISTER_BYTE (O0_REGNUM),
+ REGISTER_RAW_SIZE (O0_REGNUM));
+#else
+ CORE_ADDR sp = extract_address (®buf [REGISTER_BYTE (SP_REGNUM)],
+ REGISTER_RAW_SIZE (SP_REGNUM));
+ return read_memory_integer (sp + (16 * SPARC_INTREG_SIZE),
TARGET_PTR_BIT / TARGET_CHAR_BIT);
+#endif
}
/* Find the pc saved in frame FRAME. */
CORE_ADDR
sparc_frame_saved_pc (frame)
- FRAME frame;
+ struct frame_info *frame;
{
char buf[MAX_REGISTER_RAW_SIZE];
CORE_ADDR addr;
CORE_ADDR sigcontext_addr;
char scbuf[TARGET_PTR_BIT / HOST_CHAR_BIT];
+ int saved_pc_offset = SIGCONTEXT_PC_OFFSET;
+ char *name = NULL;
+
+ /* Solaris2 ucbsigvechandler passes a pointer to a sigcontext
+ as the third parameter. The offset to the saved pc is 12. */
+ find_pc_partial_function (frame->pc, &name,
+ (CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+ if (name && STREQ (name, "ucbsigvechandler"))
+ saved_pc_offset = 12;
/* The sigcontext address is contained in register O2. */
get_saved_register (buf, (int *)NULL, (CORE_ADDR *)NULL,
frame, O0_REGNUM + 2, (enum lval_type *)NULL);
- sigcontext_addr = extract_address (buf, REGISTER_RAW_SIZE (O0_REGNUM));
+ sigcontext_addr = extract_address (buf, REGISTER_RAW_SIZE (O0_REGNUM + 2));
/* Don't cause a memory_error when accessing sigcontext in case the
stack layout has changed or the stack is corrupt. */
- target_read_memory (sigcontext_addr + SIGCONTEXT_PC_OFFSET,
+ target_read_memory (sigcontext_addr + saved_pc_offset,
scbuf, sizeof (scbuf));
return extract_address (scbuf, sizeof (scbuf));
}
- addr = (frame->bottom + FRAME_SAVED_I0 +
- REGISTER_RAW_SIZE (I7_REGNUM) * (I7_REGNUM - I0_REGNUM));
- read_memory (addr, buf, REGISTER_RAW_SIZE (I7_REGNUM));
- return PC_ADJUST (extract_address (buf, REGISTER_RAW_SIZE (I7_REGNUM)));
+ else if (frame->next != NULL
+ && (frame->next->signal_handler_caller
+ || frame_in_dummy (frame->next))
+ && frameless_look_for_prologue (frame))
+ {
+ /* A frameless function interrupted by a signal did not save
+ the PC, it is still in %o7. */
+ get_saved_register (buf, (int *)NULL, (CORE_ADDR *)NULL,
+ frame, O7_REGNUM, (enum lval_type *)NULL);
+ return PC_ADJUST (extract_address (buf, SPARC_INTREG_SIZE));
+ }
+ if (frame->flat)
+ addr = frame->pc_addr;
+ else
+ addr = frame->bottom + FRAME_SAVED_I0 +
+ SPARC_INTREG_SIZE * (I7_REGNUM - I0_REGNUM);
+
+ if (addr == 0)
+ /* A flat frame leaf function might not save the PC anywhere,
+ just leave it in %o7. */
+ return PC_ADJUST (read_register (O7_REGNUM));
+
+ read_memory (addr, buf, SPARC_INTREG_SIZE);
+ return PC_ADJUST (extract_address (buf, SPARC_INTREG_SIZE));
}
-/*
- * Since an individual frame in the frame cache is defined by two
- * arguments (a frame pointer and a stack pointer), we need two
- * arguments to get info for an arbitrary stack frame. This routine
- * takes two arguments and makes the cached frames look as if these
- * two arguments defined a frame on the cache. This allows the rest
- * of info frame to extract the important arguments without
- * difficulty.
- */
-FRAME
+/* Since an individual frame in the frame cache is defined by two
+ arguments (a frame pointer and a stack pointer), we need two
+ arguments to get info for an arbitrary stack frame. This routine
+ takes two arguments and makes the cached frames look as if these
+ two arguments defined a frame on the cache. This allows the rest
+ of info frame to extract the important arguments without
+ difficulty. */
+
+struct frame_info *
setup_arbitrary_frame (argc, argv)
int argc;
- FRAME_ADDR *argv;
+ CORE_ADDR *argv;
{
- FRAME fid;
+ struct frame_info *frame;
if (argc != 2)
error ("Sparc frame specifications require two arguments: fp and sp");
- fid = create_new_frame (argv[0], 0);
+ frame = create_new_frame (argv[0], 0);
- if (!fid)
- fatal ("internal: create_new_frame returned invalid frame id");
+ if (!frame)
+ fatal ("internal: create_new_frame returned invalid frame");
- fid->bottom = argv[1];
- fid->pc = FRAME_SAVED_PC (fid);
- return fid;
+ frame->bottom = argv[1];
+ frame->pc = FRAME_SAVED_PC (frame);
+ return frame;
}
/* Given a pc value, skip it forward past the function prologue by
This routine should be more specific in its actions; making sure
that it uses the same register in the initial prologue section. */
-CORE_ADDR
-skip_prologue (start_pc, frameless_p)
+
+static CORE_ADDR examine_prologue PARAMS ((CORE_ADDR, int, struct frame_info *,
+ struct frame_saved_regs *));
+
+static CORE_ADDR
+examine_prologue (start_pc, frameless_p, fi, saved_regs)
CORE_ADDR start_pc;
int frameless_p;
+ struct frame_info *fi;
+ struct frame_saved_regs *saved_regs;
{
- union
- {
- unsigned long int code;
- struct
- {
- unsigned int op:2;
- unsigned int rd:5;
- unsigned int op2:3;
- unsigned int imm22:22;
- } sethi;
- struct
- {
- unsigned int op:2;
- unsigned int rd:5;
- unsigned int op3:6;
- unsigned int rs1:5;
- unsigned int i:1;
- unsigned int simm13:13;
- } add;
- int i;
- } x;
+ int insn;
int dest = -1;
CORE_ADDR pc = start_pc;
+ int is_flat = 0;
- x.i = read_memory_integer (pc, 4);
+ insn = read_memory_integer (pc, 4);
/* Recognize the `sethi' insn and record its destination. */
- if (x.sethi.op == 0 && x.sethi.op2 == 4)
+ if (X_OP (insn) == 0 && X_OP2 (insn) == 4)
{
- dest = x.sethi.rd;
+ dest = X_RD (insn);
pc += 4;
- x.i = read_memory_integer (pc, 4);
+ insn = read_memory_integer (pc, 4);
}
/* Recognize an add immediate value to register to either %g1 or
It doesn't check that rs1 == rd because in theory "sub %g0, 5, %g1"
followed by "save %sp, %g1, %sp" is a valid prologue (Not that
I imagine any compiler really does that, however). */
- if (x.add.op == 2 && x.add.i && (x.add.rd == 1 || x.add.rd == dest))
+ if (X_OP (insn) == 2
+ && X_I (insn)
+ && (X_RD (insn) == 1 || X_RD (insn) == dest))
{
pc += 4;
- x.i = read_memory_integer (pc, 4);
+ insn = read_memory_integer (pc, 4);
}
- /* This recognizes any SAVE insn. But why do the XOR and then
- the compare? That's identical to comparing against 60 (as long
- as there isn't any sign extension). */
- if (x.add.op == 2 && (x.add.op3 ^ 32) == 28)
+ /* Recognize any SAVE insn. */
+ if (X_OP (insn) == 2 && X_OP3 (insn) == 60)
{
pc += 4;
if (frameless_p) /* If the save is all we care about, */
return pc; /* return before doing more work */
- x.i = read_memory_integer (pc, 4);
+ insn = read_memory_integer (pc, 4);
}
- else
+ /* Recognize add to %sp. */
+ else if (X_OP (insn) == 2 && X_RD (insn) == 14 && X_OP3 (insn) == 0)
{
- /* Without a save instruction, it's not a prologue. */
- return start_pc;
+ pc += 4;
+ if (frameless_p) /* If the add is all we care about, */
+ return pc; /* return before doing more work */
+ is_flat = 1;
+ insn = read_memory_integer (pc, 4);
+ /* Recognize store of frame pointer (i7). */
+ if (X_OP (insn) == 3
+ && X_RD (insn) == 31
+ && X_OP3 (insn) == 4
+ && X_RS1 (insn) == 14)
+ {
+ pc += 4;
+ insn = read_memory_integer (pc, 4);
+
+ /* Recognize sub %sp, <anything>, %i7. */
+ if (X_OP (insn) == 2
+ && X_OP3 (insn) == 4
+ && X_RS1 (insn) == 14
+ && X_RD (insn) == 31)
+ {
+ pc += 4;
+ insn = read_memory_integer (pc, 4);
+ }
+ else
+ return pc;
+ }
+ else
+ return pc;
}
+ else
+ /* Without a save or add instruction, it's not a prologue. */
+ return start_pc;
- /* Now we need to recognize stores into the frame from the input
- registers. This recognizes all non alternate stores of input
- register, into a location offset from the frame pointer. */
- while (x.add.op == 3
- && (x.add.op3 & 0x3c) == 4 /* Store, non-alternate. */
- && (x.add.rd & 0x18) == 0x18 /* Input register. */
- && x.add.i /* Immediate mode. */
- && x.add.rs1 == 30 /* Off of frame pointer. */
- /* Into reserved stack space. */
- && x.add.simm13 >= 0x44
- && x.add.simm13 < 0x5b)
+ while (1)
{
+ /* Recognize stores into the frame from the input registers.
+ This recognizes all non alternate stores of input register,
+ into a location offset from the frame pointer. */
+ if ((X_OP (insn) == 3
+ && (X_OP3 (insn) & 0x3c) == 4 /* Store, non-alternate. */
+ && (X_RD (insn) & 0x18) == 0x18 /* Input register. */
+ && X_I (insn) /* Immediate mode. */
+ && X_RS1 (insn) == 30 /* Off of frame pointer. */
+ /* Into reserved stack space. */
+ && X_SIMM13 (insn) >= 0x44
+ && X_SIMM13 (insn) < 0x5b))
+ ;
+ else if (is_flat
+ && X_OP (insn) == 3
+ && X_OP3 (insn) == 4
+ && X_RS1 (insn) == 14
+ )
+ {
+ if (saved_regs && X_I (insn))
+ saved_regs->regs[X_RD (insn)] =
+ fi->frame + fi->sp_offset + X_SIMM13 (insn);
+ }
+ else
+ break;
pc += 4;
- x.i = read_memory_integer (pc, 4);
+ insn = read_memory_integer (pc, 4);
}
+
return pc;
}
-/* Check instruction at ADDR to see if it is an annulled branch.
- All other instructions will go to NPC or will trap.
- Set *TARGET if we find a canidate branch; set to zero if not. */
-
-branch_type
-isannulled (instruction, addr, target)
+CORE_ADDR
+skip_prologue (start_pc, frameless_p)
+ CORE_ADDR start_pc;
+ int frameless_p;
+{
+ return examine_prologue (start_pc, frameless_p, NULL, NULL);
+}
+
+/* Check instruction at ADDR to see if it is a branch.
+ All non-annulled instructions will go to NPC or will trap.
+ Set *TARGET if we find a candidate branch; set to zero if not.
+
+ This isn't static as it's used by remote-sa.sparc.c. */
+
+static branch_type
+isbranch (instruction, addr, target)
long instruction;
CORE_ADDR addr, *target;
{
branch_type val = not_branch;
- long int offset; /* Must be signed for sign-extend. */
- union
- {
- unsigned long int code;
- struct
- {
- unsigned int op:2;
- unsigned int a:1;
- unsigned int cond:4;
- unsigned int op2:3;
- unsigned int disp22:22;
- } b;
- } insn;
+ long int offset = 0; /* Must be signed for sign-extend. */
*target = 0;
- insn.code = instruction;
- if (insn.b.op == 0
- && (insn.b.op2 == 2 || insn.b.op2 == 6 || insn.b.op2 == 7))
+ if (X_OP (instruction) == 0
+ && (X_OP2 (instruction) == 2
+ || X_OP2 (instruction) == 6
+ || X_OP2 (instruction) == 1
+ || X_OP2 (instruction) == 3
+ || X_OP2 (instruction) == 5
+#ifndef GDB_TARGET_IS_SPARC64
+ || X_OP2 (instruction) == 7
+#endif
+ ))
{
- if (insn.b.cond == 8)
- val = insn.b.a ? baa : ba;
+ if (X_COND (instruction) == 8)
+ val = X_A (instruction) ? baa : ba;
else
- val = insn.b.a ? bicca : bicc;
- offset = 4 * ((int) (insn.b.disp22 << 10) >> 10);
+ val = X_A (instruction) ? bicca : bicc;
+ switch (X_OP2 (instruction))
+ {
+ case 2:
+ case 6:
+#ifndef GDB_TARGET_IS_SPARC64
+ case 7:
+#endif
+ offset = 4 * X_DISP22 (instruction);
+ break;
+ case 1:
+ case 5:
+ offset = 4 * X_DISP19 (instruction);
+ break;
+ case 3:
+ offset = 4 * X_DISP16 (instruction);
+ break;
+ }
*target = addr + offset;
}
+#ifdef GDB_TARGET_IS_SPARC64
+ else if (X_OP (instruction) == 2
+ && X_OP3 (instruction) == 62)
+ {
+ if (X_FCN (instruction) == 0)
+ {
+ /* done */
+ *target = read_register (TNPC_REGNUM);
+ val = done_retry;
+ }
+ else if (X_FCN (instruction) == 1)
+ {
+ /* retry */
+ *target = read_register (TPC_REGNUM);
+ val = done_retry;
+ }
+ }
+#endif
return val;
}
+\f
+/* Find register number REGNUM relative to FRAME and put its
+ (raw) contents in *RAW_BUFFER. Set *OPTIMIZED if the variable
+ was optimized out (and thus can't be fetched). If the variable
+ was fetched from memory, set *ADDRP to where it was fetched from,
+ otherwise it was fetched from a register.
+
+ The argument RAW_BUFFER must point to aligned memory. */
+
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+ char *raw_buffer;
+ int *optimized;
+ CORE_ADDR *addrp;
+ struct frame_info *frame;
+ int regnum;
+ enum lval_type *lval;
+{
+ struct frame_info *frame1;
+ CORE_ADDR addr;
+
+ if (!target_has_registers)
+ error ("No registers.");
+
+ if (optimized)
+ *optimized = 0;
+
+ addr = 0;
+
+ /* FIXME This code extracted from infcmd.c; should put elsewhere! */
+ if (frame == NULL)
+ {
+ /* error ("No selected frame."); */
+ if (!target_has_registers)
+ error ("The program has no registers now.");
+ if (selected_frame == NULL)
+ error ("No selected frame.");
+ /* Try to use selected frame */
+ frame = get_prev_frame (selected_frame);
+ if (frame == 0)
+ error ("Cmd not meaningful in the outermost frame.");
+ }
+
+
+ frame1 = frame->next;
+
+ /* Get saved PC from the frame info if not in innermost frame. */
+ if (regnum == PC_REGNUM && frame1 != NULL)
+ {
+ if (lval != NULL)
+ *lval = not_lval;
+ if (raw_buffer != NULL)
+ {
+ /* Put it back in target format. */
+ store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), frame->pc);
+ }
+ if (addrp != NULL)
+ *addrp = 0;
+ return;
+ }
+
+ while (frame1 != NULL)
+ {
+ if (frame1->pc >= (frame1->bottom ? frame1->bottom :
+ read_register (SP_REGNUM))
+ && frame1->pc <= FRAME_FP (frame1))
+ {
+ /* Dummy frame. All but the window regs are in there somewhere.
+ The window registers are saved on the stack, just like in a
+ normal frame. */
+ if (regnum >= G1_REGNUM && regnum < G1_REGNUM + 7)
+ addr = frame1->frame + (regnum - G0_REGNUM) * SPARC_INTREG_SIZE
+ - (FP_REGISTER_BYTES + 8 * SPARC_INTREG_SIZE);
+ else if (regnum >= I0_REGNUM && regnum < I0_REGNUM + 8)
+ addr = (frame1->prev->bottom
+ + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+ + FRAME_SAVED_I0);
+ else if (regnum >= L0_REGNUM && regnum < L0_REGNUM + 8)
+ addr = (frame1->prev->bottom
+ + (regnum - L0_REGNUM) * SPARC_INTREG_SIZE
+ + FRAME_SAVED_L0);
+ else if (regnum >= O0_REGNUM && regnum < O0_REGNUM + 8)
+ addr = frame1->frame + (regnum - O0_REGNUM) * SPARC_INTREG_SIZE
+ - (FP_REGISTER_BYTES + 16 * SPARC_INTREG_SIZE);
+#ifdef FP0_REGNUM
+ else if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM + 32)
+ addr = frame1->frame + (regnum - FP0_REGNUM) * 4
+ - (FP_REGISTER_BYTES);
+#ifdef GDB_TARGET_IS_SPARC64
+ else if (regnum >= FP0_REGNUM + 32 && regnum < FP_MAX_REGNUM)
+ addr = frame1->frame + 32 * 4 + (regnum - FP0_REGNUM - 32) * 8
+ - (FP_REGISTER_BYTES);
+#endif
+#endif /* FP0_REGNUM */
+ else if (regnum >= Y_REGNUM && regnum < NUM_REGS)
+ addr = frame1->frame + (regnum - Y_REGNUM) * SPARC_INTREG_SIZE
+ - (FP_REGISTER_BYTES + 24 * SPARC_INTREG_SIZE);
+ }
+ else if (frame1->flat)
+ {
+
+ if (regnum == RP_REGNUM)
+ addr = frame1->pc_addr;
+ else if (regnum == I7_REGNUM)
+ addr = frame1->fp_addr;
+ else
+ {
+ CORE_ADDR func_start;
+ struct frame_saved_regs regs;
+ memset (®s, 0, sizeof (regs));
+
+ find_pc_partial_function (frame1->pc, NULL, &func_start, NULL);
+ examine_prologue (func_start, 0, frame1, ®s);
+ addr = regs.regs[regnum];
+ }
+ }
+ else
+ {
+ /* Normal frame. Local and In registers are saved on stack. */
+ if (regnum >= I0_REGNUM && regnum < I0_REGNUM + 8)
+ addr = (frame1->prev->bottom
+ + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+ + FRAME_SAVED_I0);
+ else if (regnum >= L0_REGNUM && regnum < L0_REGNUM + 8)
+ addr = (frame1->prev->bottom
+ + (regnum - L0_REGNUM) * SPARC_INTREG_SIZE
+ + FRAME_SAVED_L0);
+ else if (regnum >= O0_REGNUM && regnum < O0_REGNUM + 8)
+ {
+ /* Outs become ins. */
+ get_saved_register (raw_buffer, optimized, addrp, frame1,
+ (regnum - O0_REGNUM + I0_REGNUM), lval);
+ return;
+ }
+ }
+ if (addr != 0)
+ break;
+ frame1 = frame1->next;
+ }
+ if (addr != 0)
+ {
+ if (lval != NULL)
+ *lval = lval_memory;
+ if (regnum == SP_REGNUM)
+ {
+ if (raw_buffer != NULL)
+ {
+ /* Put it back in target format. */
+ store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), addr);
+ }
+ if (addrp != NULL)
+ *addrp = 0;
+ return;
+ }
+ if (raw_buffer != NULL)
+ read_memory (addr, raw_buffer, REGISTER_RAW_SIZE (regnum));
+ }
+ else
+ {
+ if (lval != NULL)
+ *lval = lval_register;
+ addr = REGISTER_BYTE (regnum);
+ if (raw_buffer != NULL)
+ read_register_gen (regnum, raw_buffer);
+ }
+ if (addrp != NULL)
+ *addrp = addr;
+}
+
+/* Push an empty stack frame, and record in it the current PC, regs, etc.
+
+ We save the non-windowed registers and the ins. The locals and outs
+ are new; they don't need to be saved. The i's and l's of
+ the last frame were already saved on the stack. */
+
+/* Definitely see tm-sparc.h for more doc of the frame format here. */
+
+#ifdef GDB_TARGET_IS_SPARC64
+#define DUMMY_REG_SAVE_OFFSET (128 + 16)
+#else
+#define DUMMY_REG_SAVE_OFFSET 0x60
+#endif
+
+/* See tm-sparc.h for how this is calculated. */
+#ifdef FP0_REGNUM
+#define DUMMY_STACK_REG_BUF_SIZE \
+(((8+8+8) * SPARC_INTREG_SIZE) + (32 * REGISTER_RAW_SIZE (FP0_REGNUM)))
+#else
+#define DUMMY_STACK_REG_BUF_SIZE \
+(((8+8+8) * SPARC_INTREG_SIZE) )
+#endif /* FP0_REGNUM */
+#define DUMMY_STACK_SIZE (DUMMY_STACK_REG_BUF_SIZE + DUMMY_REG_SAVE_OFFSET)
+
+void
+sparc_push_dummy_frame ()
+{
+ CORE_ADDR sp, old_sp;
+ char register_temp[DUMMY_STACK_SIZE];
+
+ old_sp = sp = read_register (SP_REGNUM);
+
+#ifdef GDB_TARGET_IS_SPARC64
+ /* FIXME: not sure what needs to be saved here. */
+#else
+ /* Y, PS, WIM, TBR, PC, NPC, FPS, CPS regs */
+ read_register_bytes (REGISTER_BYTE (Y_REGNUM), ®ister_temp[0],
+ REGISTER_RAW_SIZE (Y_REGNUM) * 8);
+#endif
+
+ read_register_bytes (REGISTER_BYTE (O0_REGNUM),
+ ®ister_temp[8 * SPARC_INTREG_SIZE],
+ SPARC_INTREG_SIZE * 8);
+
+ read_register_bytes (REGISTER_BYTE (G0_REGNUM),
+ ®ister_temp[16 * SPARC_INTREG_SIZE],
+ SPARC_INTREG_SIZE * 8);
-/* sparc_frame_find_saved_regs ()
+#ifdef FP0_REGNUM
+ read_register_bytes (REGISTER_BYTE (FP0_REGNUM),
+ ®ister_temp[24 * SPARC_INTREG_SIZE],
+ FP_REGISTER_BYTES);
+#endif /* FP0_REGNUM */
+
+ sp -= DUMMY_STACK_SIZE;
+
+ write_register (SP_REGNUM, sp);
+
+ write_memory (sp + DUMMY_REG_SAVE_OFFSET, ®ister_temp[0],
+ DUMMY_STACK_REG_BUF_SIZE);
+
+ write_register (FP_REGNUM, old_sp);
+
+ /* Set return address register for the call dummy to the current PC. */
+ write_register (I7_REGNUM, read_pc() - 8);
+}
+
+/* sparc_frame_find_saved_regs (). This function is here only because
+ pop_frame uses it. Note there is an interesting corner case which
+ I think few ports of GDB get right--if you are popping a frame
+ which does not save some register that *is* saved by a more inner
+ frame (such a frame will never be a dummy frame because dummy
+ frames save all registers). Rewriting pop_frame to use
+ get_saved_register would solve this problem and also get rid of the
+ ugly duplication between sparc_frame_find_saved_regs and
+ get_saved_register.
Stores, into a struct frame_saved_regs,
the addresses of the saved registers of frame described by FRAME_INFO.
See tm-sparc.h (PUSH_FRAME and friends) for CRITICAL information
about how this works. */
-void
+static void sparc_frame_find_saved_regs PARAMS ((struct frame_info *,
+ struct frame_saved_regs *));
+
+static void
sparc_frame_find_saved_regs (fi, saved_regs_addr)
struct frame_info *fi;
struct frame_saved_regs *saved_regs_addr;
{
register int regnum;
- FRAME_ADDR frame = FRAME_FP(fi);
- FRAME fid = FRAME_INFO_ID (fi);
+ CORE_ADDR frame_addr = FRAME_FP (fi);
- if (!fid)
+ if (!fi)
fatal ("Bad frame info struct in FRAME_FIND_SAVED_REGS");
memset (saved_regs_addr, 0, sizeof (*saved_regs_addr));
/* Dummy frame. All but the window regs are in there somewhere. */
for (regnum = G1_REGNUM; regnum < G1_REGNUM+7; regnum++)
saved_regs_addr->regs[regnum] =
- frame + (regnum - G0_REGNUM) * 4 - 0xa0;
+ frame_addr + (regnum - G0_REGNUM) * SPARC_INTREG_SIZE
+ - DUMMY_STACK_REG_BUF_SIZE + 16 * SPARC_INTREG_SIZE;
for (regnum = I0_REGNUM; regnum < I0_REGNUM+8; regnum++)
saved_regs_addr->regs[regnum] =
- frame + (regnum - I0_REGNUM) * 4 - 0xc0;
+ frame_addr + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+ - DUMMY_STACK_REG_BUF_SIZE + 8 * SPARC_INTREG_SIZE;
+#ifdef FP0_REGNUM
for (regnum = FP0_REGNUM; regnum < FP0_REGNUM + 32; regnum++)
saved_regs_addr->regs[regnum] =
- frame + (regnum - FP0_REGNUM) * 4 - 0x80;
+ frame_addr + (regnum - FP0_REGNUM) * 4
+ - DUMMY_STACK_REG_BUF_SIZE + 24 * SPARC_INTREG_SIZE;
+#ifdef GDB_TARGET_IS_SPARC64
+ for (regnum = FP0_REGNUM + 32; regnum < FP_MAX_REGNUM; regnum++)
+ saved_regs_addr->regs[regnum] =
+ frame_addr + 32 * 4 + (regnum - FP0_REGNUM - 32) * 8
+ - DUMMY_STACK_REG_BUF_SIZE + 24 * SPARC_INTREG_SIZE;
+#endif
+#endif /* FP0_REGNUM */
for (regnum = Y_REGNUM; regnum < NUM_REGS; regnum++)
saved_regs_addr->regs[regnum] =
- frame + (regnum - Y_REGNUM) * 4 - 0xe0;
- frame = fi->bottom ?
+ frame_addr + (regnum - Y_REGNUM) * SPARC_INTREG_SIZE
+ - DUMMY_STACK_REG_BUF_SIZE;
+ frame_addr = fi->bottom ?
fi->bottom : read_register (SP_REGNUM);
}
+ else if (fi->flat)
+ {
+ CORE_ADDR func_start;
+ find_pc_partial_function (fi->pc, NULL, &func_start, NULL);
+ examine_prologue (func_start, 0, fi, saved_regs_addr);
+
+ /* Flat register window frame. */
+ saved_regs_addr->regs[RP_REGNUM] = fi->pc_addr;
+ saved_regs_addr->regs[I7_REGNUM] = fi->fp_addr;
+ }
else
{
/* Normal frame. Just Local and In registers */
- frame = fi->bottom ?
+ frame_addr = fi->bottom ?
fi->bottom : read_register (SP_REGNUM);
- for (regnum = L0_REGNUM; regnum < L0_REGNUM+16; regnum++)
- saved_regs_addr->regs[regnum] = frame + (regnum-L0_REGNUM) * 4;
+ for (regnum = L0_REGNUM; regnum < L0_REGNUM+8; regnum++)
+ saved_regs_addr->regs[regnum] =
+ (frame_addr + (regnum - L0_REGNUM) * SPARC_INTREG_SIZE
+ + FRAME_SAVED_L0);
+ for (regnum = I0_REGNUM; regnum < I0_REGNUM+8; regnum++)
+ saved_regs_addr->regs[regnum] =
+ (frame_addr + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+ + FRAME_SAVED_I0);
}
if (fi->next)
{
- /* Pull off either the next frame pointer or the stack pointer */
- FRAME_ADDR next_next_frame =
- (fi->next->bottom ?
- fi->next->bottom :
- read_register (SP_REGNUM));
- for (regnum = O0_REGNUM; regnum < O0_REGNUM+8; regnum++)
- saved_regs_addr->regs[regnum] = next_next_frame + regnum * 4;
+ if (fi->flat)
+ {
+ saved_regs_addr->regs[O7_REGNUM] = fi->pc_addr;
+ }
+ else
+ {
+ /* Pull off either the next frame pointer or the stack pointer */
+ CORE_ADDR next_next_frame_addr =
+ (fi->next->bottom ?
+ fi->next->bottom :
+ read_register (SP_REGNUM));
+ for (regnum = O0_REGNUM; regnum < O0_REGNUM+8; regnum++)
+ saved_regs_addr->regs[regnum] =
+ (next_next_frame_addr
+ + (regnum - O0_REGNUM) * SPARC_INTREG_SIZE
+ + FRAME_SAVED_I0);
+ }
}
/* Otherwise, whatever we would get from ptrace(GETREGS) is accurate */
saved_regs_addr->regs[SP_REGNUM] = FRAME_FP (fi);
}
-/* Push an empty stack frame, and record in it the current PC, regs, etc.
-
- We save the non-windowed registers and the ins. The locals and outs
- are new; they don't need to be saved. The i's and l's of
- the last frame were already saved on the stack. */
-
-/* Definitely see tm-sparc.h for more doc of the frame format here. */
-
-void
-sparc_push_dummy_frame ()
-{
- CORE_ADDR sp, old_sp;
- char register_temp[0x140];
-
- old_sp = sp = read_register (SP_REGNUM);
-
- /* Y, PS, WIM, TBR, PC, NPC, FPS, CPS regs */
- read_register_bytes (REGISTER_BYTE (Y_REGNUM), ®ister_temp[0],
- REGISTER_RAW_SIZE (Y_REGNUM) * 8);
-
- read_register_bytes (REGISTER_BYTE (O0_REGNUM), ®ister_temp[8 * 4],
- REGISTER_RAW_SIZE (O0_REGNUM) * 8);
-
- read_register_bytes (REGISTER_BYTE (G0_REGNUM), ®ister_temp[16 * 4],
- REGISTER_RAW_SIZE (G0_REGNUM) * 8);
-
- read_register_bytes (REGISTER_BYTE (FP0_REGNUM), ®ister_temp[24 * 4],
- REGISTER_RAW_SIZE (FP0_REGNUM) * 32);
-
- sp -= 0x140;
-
- write_register (SP_REGNUM, sp);
-
- write_memory (sp + 0x60, ®ister_temp[0], (8 + 8 + 8 + 32) * 4);
-
- write_register (FP_REGNUM, old_sp);
-
- /* Set return address register for the call dummy to the current PC. */
- write_register (I7_REGNUM, read_pc() - 8);
-}
-
/* Discard from the stack the innermost frame, restoring all saved registers.
Note that the values stored in fsr by get_frame_saved_regs are *in
void
sparc_pop_frame ()
{
- register FRAME frame = get_current_frame ();
+ register struct frame_info *frame = get_current_frame ();
register CORE_ADDR pc;
struct frame_saved_regs fsr;
- struct frame_info *fi;
char raw_buffer[REGISTER_BYTES];
+ int regnum;
- fi = get_frame_info (frame);
- get_frame_saved_regs (fi, &fsr);
+ sparc_frame_find_saved_regs (frame, &fsr);
+#ifdef FP0_REGNUM
if (fsr.regs[FP0_REGNUM])
{
- read_memory (fsr.regs[FP0_REGNUM], raw_buffer, 32 * 4);
- write_register_bytes (REGISTER_BYTE (FP0_REGNUM), raw_buffer, 32 * 4);
+ read_memory (fsr.regs[FP0_REGNUM], raw_buffer, FP_REGISTER_BYTES);
+ write_register_bytes (REGISTER_BYTE (FP0_REGNUM),
+ raw_buffer, FP_REGISTER_BYTES);
}
+#ifndef GDB_TARGET_IS_SPARC64
if (fsr.regs[FPS_REGNUM])
{
read_memory (fsr.regs[FPS_REGNUM], raw_buffer, 4);
read_memory (fsr.regs[CPS_REGNUM], raw_buffer, 4);
write_register_bytes (REGISTER_BYTE (CPS_REGNUM), raw_buffer, 4);
}
+#endif
+#endif /* FP0_REGNUM */
if (fsr.regs[G1_REGNUM])
{
- read_memory (fsr.regs[G1_REGNUM], raw_buffer, 7 * 4);
- write_register_bytes (REGISTER_BYTE (G1_REGNUM), raw_buffer, 7 * 4);
+ read_memory (fsr.regs[G1_REGNUM], raw_buffer, 7 * SPARC_INTREG_SIZE);
+ write_register_bytes (REGISTER_BYTE (G1_REGNUM), raw_buffer,
+ 7 * SPARC_INTREG_SIZE);
}
- if (fsr.regs[I0_REGNUM])
+
+ if (frame->flat)
+ {
+ /* Each register might or might not have been saved, need to test
+ individually. */
+ for (regnum = L0_REGNUM; regnum < L0_REGNUM + 8; ++regnum)
+ if (fsr.regs[regnum])
+ write_register (regnum, read_memory_integer (fsr.regs[regnum],
+ SPARC_INTREG_SIZE));
+ for (regnum = I0_REGNUM; regnum < I0_REGNUM + 8; ++regnum)
+ if (fsr.regs[regnum])
+ write_register (regnum, read_memory_integer (fsr.regs[regnum],
+ SPARC_INTREG_SIZE));
+
+ /* Handle all outs except stack pointer (o0-o5; o7). */
+ for (regnum = O0_REGNUM; regnum < O0_REGNUM + 6; ++regnum)
+ if (fsr.regs[regnum])
+ write_register (regnum, read_memory_integer (fsr.regs[regnum],
+ SPARC_INTREG_SIZE));
+ if (fsr.regs[O0_REGNUM + 7])
+ write_register (O0_REGNUM + 7,
+ read_memory_integer (fsr.regs[O0_REGNUM + 7],
+ SPARC_INTREG_SIZE));
+
+ write_register (SP_REGNUM, frame->frame);
+ }
+ else if (fsr.regs[I0_REGNUM])
{
CORE_ADDR sp;
char reg_temp[REGISTER_BYTES];
- read_memory (fsr.regs[I0_REGNUM], raw_buffer, 8 * 4);
+ read_memory (fsr.regs[I0_REGNUM], raw_buffer, 8 * SPARC_INTREG_SIZE);
/* Get the ins and locals which we are about to restore. Just
moving the stack pointer is all that is really needed, except
locals from the registers array, so we need to muck with the
registers array. */
sp = fsr.regs[SP_REGNUM];
- read_memory (sp, reg_temp, REGISTER_RAW_SIZE (L0_REGNUM) * 16);
+ read_memory (sp, reg_temp, SPARC_INTREG_SIZE * 16);
/* Restore the out registers.
Among other things this writes the new stack pointer. */
write_register_bytes (REGISTER_BYTE (O0_REGNUM), raw_buffer,
- REGISTER_RAW_SIZE (O0_REGNUM) * 8);
+ SPARC_INTREG_SIZE * 8);
write_register_bytes (REGISTER_BYTE (L0_REGNUM), reg_temp,
- REGISTER_RAW_SIZE (L0_REGNUM) * 16);
+ SPARC_INTREG_SIZE * 16);
}
+#ifndef GDB_TARGET_IS_SPARC64
if (fsr.regs[PS_REGNUM])
write_register (PS_REGNUM, read_memory_integer (fsr.regs[PS_REGNUM], 4));
+#endif
if (fsr.regs[Y_REGNUM])
- write_register (Y_REGNUM, read_memory_integer (fsr.regs[Y_REGNUM], 4));
+ write_register (Y_REGNUM, read_memory_integer (fsr.regs[Y_REGNUM], REGISTER_RAW_SIZE (Y_REGNUM)));
if (fsr.regs[PC_REGNUM])
{
/* Explicitly specified PC (and maybe NPC) -- just restore them. */
- write_register (PC_REGNUM, read_memory_integer (fsr.regs[PC_REGNUM], 4));
+ write_register (PC_REGNUM, read_memory_integer (fsr.regs[PC_REGNUM],
+ REGISTER_RAW_SIZE (PC_REGNUM)));
if (fsr.regs[NPC_REGNUM])
write_register (NPC_REGNUM,
- read_memory_integer (fsr.regs[NPC_REGNUM], 4));
+ read_memory_integer (fsr.regs[NPC_REGNUM],
+ REGISTER_RAW_SIZE (NPC_REGNUM)));
+ }
+ else if (frame->flat)
+ {
+ if (frame->pc_addr)
+ pc = PC_ADJUST ((CORE_ADDR)
+ read_memory_integer (frame->pc_addr,
+ REGISTER_RAW_SIZE (PC_REGNUM)));
+ else
+ {
+ /* I think this happens only in the innermost frame, if so then
+ it is a complicated way of saying
+ "pc = read_register (O7_REGNUM);". */
+ char buf[MAX_REGISTER_RAW_SIZE];
+ get_saved_register (buf, 0, 0, frame, O7_REGNUM, 0);
+ pc = PC_ADJUST (extract_address
+ (buf, REGISTER_RAW_SIZE (O7_REGNUM)));
+ }
+
+ write_register (PC_REGNUM, pc);
+ write_register (NPC_REGNUM, pc + 4);
}
else if (fsr.regs[I7_REGNUM])
{
/* Return address in %i7 -- adjust it, then restore PC and NPC from it */
- pc = PC_ADJUST (read_memory_integer (fsr.regs[I7_REGNUM], 4));
+ pc = PC_ADJUST ((CORE_ADDR) read_memory_integer (fsr.regs[I7_REGNUM],
+ SPARC_INTREG_SIZE));
write_register (PC_REGNUM, pc);
write_register (NPC_REGNUM, pc + 4);
}
flush_cached_frames ();
- set_current_frame ( create_new_frame (read_register (FP_REGNUM),
- read_pc ()));
}
/* On the Sun 4 under SunOS, the compile will leave a fake insn which
char buf[4];
int err;
- err = target_read_memory (pc + 8, buf, sizeof(long));
+ err = target_read_memory (pc + 8, buf, 4);
insn = extract_unsigned_integer (buf, 4);
- if ((err == 0) && (insn & 0xfffffe00) == 0)
+ if ((err == 0) && (insn & 0xffc00000) == 0)
return pc+12;
else
return pc+8;
}
+
+/* If pc is in a shared library trampoline, return its target.
+ The SunOs 4.x linker rewrites the jump table entries for PIC
+ compiled modules in the main executable to bypass the dynamic linker
+ with jumps of the form
+ sethi %hi(addr),%g1
+ jmp %g1+%lo(addr)
+ and removes the corresponding jump table relocation entry in the
+ dynamic relocations.
+ find_solib_trampoline_target relies on the presence of the jump
+ table relocation entry, so we have to detect these jump instructions
+ by hand. */
+
+CORE_ADDR
+sunos4_skip_trampoline_code (pc)
+ CORE_ADDR pc;
+{
+ unsigned long insn1;
+ char buf[4];
+ int err;
+
+ err = target_read_memory (pc, buf, 4);
+ insn1 = extract_unsigned_integer (buf, 4);
+ if (err == 0 && (insn1 & 0xffc00000) == 0x03000000)
+ {
+ unsigned long insn2;
+
+ err = target_read_memory (pc + 4, buf, 4);
+ insn2 = extract_unsigned_integer (buf, 4);
+ if (err == 0 && (insn2 & 0xffffe000) == 0x81c06000)
+ {
+ CORE_ADDR target_pc = (insn1 & 0x3fffff) << 10;
+ int delta = insn2 & 0x1fff;
+
+ /* Sign extend the displacement. */
+ if (delta & 0x1000)
+ delta |= ~0x1fff;
+ return target_pc + delta;
+ }
+ }
+ return find_solib_trampoline_target (pc);
+}
\f
#ifdef USE_PROC_FS /* Target dependent support for /proc */
*/
-
-/* Given a pointer to a general register set in /proc format (gregset_t *),
- unpack the register contents and supply them as gdb's idea of the current
- register values. */
+/* Given a pointer to a general register set in /proc format (gregset_t *),
+ unpack the register contents and supply them as gdb's idea of the current
+ register values. */
void
supply_gregset (gregsetp)
{
register int regi;
register prgreg_t *regp = (prgreg_t *) gregsetp;
+ static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
/* GDB register numbers for Gn, On, Ln, In all match /proc reg numbers. */
for (regi = G0_REGNUM ; regi <= I7_REGNUM ; regi++)
supply_register (PC_REGNUM, (char *) (regp + R_PC));
supply_register (NPC_REGNUM,(char *) (regp + R_nPC));
supply_register (Y_REGNUM, (char *) (regp + R_Y));
+
+ /* Fill inaccessible registers with zero. */
+ supply_register (WIM_REGNUM, zerobuf);
+ supply_register (TBR_REGNUM, zerobuf);
+ supply_register (CPS_REGNUM, zerobuf);
}
void
{
int regi;
register prgreg_t *regp = (prgreg_t *) gregsetp;
- extern char registers[];
for (regi = 0 ; regi <= R_I7 ; regi++)
{
register int regi;
char *from;
- for (regi = FP0_REGNUM ; regi < FP0_REGNUM+32 ; regi++)
+ for (regi = FP0_REGNUM ; regi < FP_MAX_REGNUM ; regi++)
{
from = (char *) &fpregsetp->pr_fr.pr_regs[regi-FP0_REGNUM];
supply_register (regi, from);
(fpregset_t *), update the register specified by REGNO from gdb's idea
of the current floating point register set. If REGNO is -1, update
them all. */
+/* ??? This will probably need some changes for sparc64. */
void
fill_fpregset (fpregsetp, regno)
int regi;
char *to;
char *from;
- extern char registers[];
- for (regi = FP0_REGNUM ; regi < FP0_REGNUM+32 ; regi++)
+ for (regi = FP0_REGNUM ; regi < FP_MAX_REGNUM ; regi++)
{
if ((regno == -1) || (regno == regi))
{
This routine returns true on success */
int
-get_longjmp_target(pc)
+get_longjmp_target (pc)
CORE_ADDR *pc;
{
CORE_ADDR jb_addr;
#define LONGJMP_TARGET_SIZE 4
char buf[LONGJMP_TARGET_SIZE];
- jb_addr = read_register(O0_REGNUM);
+ jb_addr = read_register (O0_REGNUM);
- if (target_read_memory(jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
- LONGJMP_TARGET_SIZE))
+ if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
+ LONGJMP_TARGET_SIZE))
return 0;
*pc = extract_address (buf, LONGJMP_TARGET_SIZE);
return 1;
}
#endif /* GET_LONGJMP_TARGET */
+\f
+#ifdef STATIC_TRANSFORM_NAME
+/* SunPRO (3.0 at least), encodes the static variables. This is not
+ related to C++ mangling, it is done for C too. */
+
+char *
+sunpro_static_transform_name (name)
+ char *name;
+{
+ char *p;
+ if (name[0] == '$')
+ {
+ /* For file-local statics there will be a dollar sign, a bunch
+ of junk (the contents of which match a string given in the
+ N_OPT), a period and the name. For function-local statics
+ there will be a bunch of junk (which seems to change the
+ second character from 'A' to 'B'), a period, the name of the
+ function, and the name. So just skip everything before the
+ last period. */
+ p = strrchr (name, '.');
+ if (p != NULL)
+ name = p + 1;
+ }
+ return name;
+}
+#endif /* STATIC_TRANSFORM_NAME */
+\f
+#ifdef GDB_TARGET_IS_SPARC64
+
+/* Utilities for printing registers.
+ Page numbers refer to the SPARC Architecture Manual. */
+
+static void dump_ccreg PARAMS ((char *, int));
+
+static void
+dump_ccreg (reg, val)
+ char *reg;
+ int val;
+{
+ /* page 41 */
+ printf_unfiltered ("%s:%s,%s,%s,%s", reg,
+ val & 8 ? "N" : "NN",
+ val & 4 ? "Z" : "NZ",
+ val & 2 ? "O" : "NO",
+ val & 1 ? "C" : "NC"
+ );
+}
+
+static char *
+decode_asi (val)
+ int val;
+{
+ /* page 72 */
+ switch (val)
+ {
+ case 4 : return "ASI_NUCLEUS";
+ case 0x0c : return "ASI_NUCLEUS_LITTLE";
+ case 0x10 : return "ASI_AS_IF_USER_PRIMARY";
+ case 0x11 : return "ASI_AS_IF_USER_SECONDARY";
+ case 0x18 : return "ASI_AS_IF_USER_PRIMARY_LITTLE";
+ case 0x19 : return "ASI_AS_IF_USER_SECONDARY_LITTLE";
+ case 0x80 : return "ASI_PRIMARY";
+ case 0x81 : return "ASI_SECONDARY";
+ case 0x82 : return "ASI_PRIMARY_NOFAULT";
+ case 0x83 : return "ASI_SECONDARY_NOFAULT";
+ case 0x88 : return "ASI_PRIMARY_LITTLE";
+ case 0x89 : return "ASI_SECONDARY_LITTLE";
+ case 0x8a : return "ASI_PRIMARY_NOFAULT_LITTLE";
+ case 0x8b : return "ASI_SECONDARY_NOFAULT_LITTLE";
+ default : return NULL;
+ }
+}
+
+/* PRINT_REGISTER_HOOK routine.
+ Pretty print various registers. */
+/* FIXME: Would be nice if this did some fancy things for 32 bit sparc. */
+
+void
+sparc_print_register_hook (regno)
+ int regno;
+{
+ ULONGEST val;
+
+ /* Handle double/quad versions of lower 32 fp regs. */
+ if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32
+ && (regno & 1) == 0)
+ {
+ char value[16];
+
+ if (!read_relative_register_raw_bytes (regno, value)
+ && !read_relative_register_raw_bytes (regno + 1, value + 4))
+ {
+ printf_unfiltered ("\t");
+ print_floating (value, builtin_type_double, gdb_stdout);
+ }
+#if 0 /* FIXME: gdb doesn't handle long doubles */
+ if ((regno & 3) == 0)
+ {
+ if (!read_relative_register_raw_bytes (regno + 2, value + 8)
+ && !read_relative_register_raw_bytes (regno + 3, value + 12))
+ {
+ printf_unfiltered ("\t");
+ print_floating (value, builtin_type_long_double, gdb_stdout);
+ }
+ }
+#endif
+ return;
+ }
+
+#if 0 /* FIXME: gdb doesn't handle long doubles */
+ /* Print upper fp regs as long double if appropriate. */
+ if (regno >= FP0_REGNUM + 32 && regno < FP_MAX_REGNUM
+ /* We test for even numbered regs and not a multiple of 4 because
+ the upper fp regs are recorded as doubles. */
+ && (regno & 1) == 0)
+ {
+ char value[16];
+
+ if (!read_relative_register_raw_bytes (regno, value)
+ && !read_relative_register_raw_bytes (regno + 1, value + 8))
+ {
+ printf_unfiltered ("\t");
+ print_floating (value, builtin_type_long_double, gdb_stdout);
+ }
+ return;
+ }
+#endif
-/* So far used only for sparc solaris. In sparc solaris, we recognize
- a trampoline by it's section name. That is, if the pc is in a
- section named ".plt" then we are in a trampline. */
+ /* FIXME: Some of these are priviledged registers.
+ Not sure how they should be handled. */
+#define BITS(n, mask) ((int) (((val) >> (n)) & (mask)))
+
+ val = read_register (regno);
+
+ /* pages 40 - 60 */
+ switch (regno)
+ {
+ case CCR_REGNUM :
+ printf_unfiltered("\t");
+ dump_ccreg ("xcc", val >> 4);
+ printf_unfiltered(", ");
+ dump_ccreg ("icc", val & 15);
+ break;
+ case FPRS_REGNUM :
+ printf ("\tfef:%d, du:%d, dl:%d",
+ BITS (2, 1), BITS (1, 1), BITS (0, 1));
+ break;
+ case FSR_REGNUM :
+ {
+ static char *fcc[4] = { "=", "<", ">", "?" };
+ static char *rd[4] = { "N", "0", "+", "-" };
+ /* Long, yes, but I'd rather leave it as is and use a wide screen. */
+ printf ("\t0:%s, 1:%s, 2:%s, 3:%s, rd:%s, tem:%d, ns:%d, ver:%d, ftt:%d, qne:%d, aexc:%d, cexc:%d",
+ fcc[BITS (10, 3)], fcc[BITS (32, 3)],
+ fcc[BITS (34, 3)], fcc[BITS (36, 3)],
+ rd[BITS (30, 3)], BITS (23, 31), BITS (22, 1), BITS (17, 7),
+ BITS (14, 7), BITS (13, 1), BITS (5, 31), BITS (0, 31));
+ break;
+ }
+ case ASI_REGNUM :
+ {
+ char *asi = decode_asi (val);
+ if (asi != NULL)
+ printf ("\t%s", asi);
+ break;
+ }
+ case VER_REGNUM :
+ printf ("\tmanuf:%d, impl:%d, mask:%d, maxtl:%d, maxwin:%d",
+ BITS (48, 0xffff), BITS (32, 0xffff),
+ BITS (24, 0xff), BITS (8, 0xff), BITS (0, 31));
+ break;
+ case PSTATE_REGNUM :
+ {
+ static char *mm[4] = { "tso", "pso", "rso", "?" };
+ printf ("\tcle:%d, tle:%d, mm:%s, red:%d, pef:%d, am:%d, priv:%d, ie:%d, ag:%d",
+ BITS (9, 1), BITS (8, 1), mm[BITS (6, 3)], BITS (5, 1),
+ BITS (4, 1), BITS (3, 1), BITS (2, 1), BITS (1, 1),
+ BITS (0, 1));
+ break;
+ }
+ case TSTATE_REGNUM :
+ /* FIXME: print all 4? */
+ break;
+ case TT_REGNUM :
+ /* FIXME: print all 4? */
+ break;
+ case TPC_REGNUM :
+ /* FIXME: print all 4? */
+ break;
+ case TNPC_REGNUM :
+ /* FIXME: print all 4? */
+ break;
+ case WSTATE_REGNUM :
+ printf ("\tother:%d, normal:%d", BITS (3, 7), BITS (0, 7));
+ break;
+ case CWP_REGNUM :
+ printf ("\t%d", BITS (0, 31));
+ break;
+ case CANSAVE_REGNUM :
+ printf ("\t%-2d before spill", BITS (0, 31));
+ break;
+ case CANRESTORE_REGNUM :
+ printf ("\t%-2d before fill", BITS (0, 31));
+ break;
+ case CLEANWIN_REGNUM :
+ printf ("\t%-2d before clean", BITS (0, 31));
+ break;
+ case OTHERWIN_REGNUM :
+ printf ("\t%d", BITS (0, 31));
+ break;
+ }
+
+#undef BITS
+}
+
+#endif
+\f
int
-in_solib_trampoline(pc, name)
- CORE_ADDR pc;
- char *name;
+gdb_print_insn_sparc (memaddr, info)
+ bfd_vma memaddr;
+ disassemble_info *info;
{
- struct obj_section *s;
- int retval = 0;
-
- s = find_pc_section(pc);
-
- retval = (s != NULL
- && s->sec_ptr->name != NULL
- && STREQ (s->sec_ptr->name, ".plt"));
- return(retval);
+ /* It's necessary to override mach again because print_insn messes it up. */
+ info->mach = TM_PRINT_INSN_MACH;
+ return print_insn_sparc (memaddr, info);
}
+\f
+/* The SPARC passes the arguments on the stack; arguments smaller
+ than an int are promoted to an int. */
+CORE_ADDR
+sparc_push_arguments (nargs, args, sp, struct_return, struct_addr)
+ int nargs;
+ value_ptr *args;
+ CORE_ADDR sp;
+ int struct_return;
+ CORE_ADDR struct_addr;
+{
+ int i;
+ int accumulate_size = 0;
+ struct sparc_arg
+ {
+ char *contents;
+ int len;
+ int offset;
+ };
+ struct sparc_arg *sparc_args =
+ (struct sparc_arg*)alloca (nargs * sizeof (struct sparc_arg));
+ struct sparc_arg *m_arg;
+
+ /* Promote arguments if necessary, and calculate their stack offsets
+ and sizes. */
+ for (i = 0, m_arg = sparc_args; i < nargs; i++, m_arg++)
+ {
+ value_ptr arg = args[i];
+ struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+ /* Cast argument to long if necessary as the compiler does it too. */
+ switch (TYPE_CODE (arg_type))
+ {
+ case TYPE_CODE_INT:
+ case TYPE_CODE_BOOL:
+ case TYPE_CODE_CHAR:
+ case TYPE_CODE_RANGE:
+ case TYPE_CODE_ENUM:
+ if (TYPE_LENGTH (arg_type) < TYPE_LENGTH (builtin_type_long))
+ {
+ arg_type = builtin_type_long;
+ arg = value_cast (arg_type, arg);
+ }
+ break;
+ default:
+ break;
+ }
+ m_arg->len = TYPE_LENGTH (arg_type);
+ m_arg->offset = accumulate_size;
+ accumulate_size = (accumulate_size + m_arg->len + 3) & ~3;
+ m_arg->contents = VALUE_CONTENTS(arg);
+ }
+
+ /* Make room for the arguments on the stack. */
+ accumulate_size += CALL_DUMMY_STACK_ADJUST;
+ sp = ((sp - accumulate_size) & ~7) + CALL_DUMMY_STACK_ADJUST;
+
+ /* `Push' arguments on the stack. */
+ for (i = nargs; m_arg--, --i >= 0; )
+ write_memory(sp + m_arg->offset, m_arg->contents, m_arg->len);
+
+ return sp;
+}
+\f
+void
+_initialize_sparc_tdep ()
+{
+ tm_print_insn = gdb_print_insn_sparc;
+ tm_print_insn_info.mach = TM_PRINT_INSN_MACH; /* Selects sparc/sparclite */
+}