}
}
\f
-#define FRAME_SAVED_L0 0 /* Byte offset from SP */
-#define FRAME_SAVED_I0 32 /* Byte offset from SP */
+#define FRAME_SAVED_L0 0 /* Byte offset from SP */
+#define FRAME_SAVED_I0 (8 * REGISTER_RAW_SIZE (0)) /* Byte offset from SP */
CORE_ADDR
sparc_frame_chain (thisframe)
FRAME thisframe;
{
- CORE_ADDR retval;
+ REGISTER_TYPE retval;
int err;
CORE_ADDR addr;
addr = thisframe->frame + FRAME_SAVED_I0 +
- REGISTER_RAW_SIZE(FP_REGNUM) * (FP_REGNUM - I0_REGNUM);
- err = target_read_memory (addr, (char *) &retval, sizeof (CORE_ADDR));
+ REGISTER_RAW_SIZE (FP_REGNUM) * (FP_REGNUM - I0_REGNUM);
+ err = target_read_memory (addr, (char *) &retval, sizeof (REGISTER_TYPE));
if (err)
return 0;
- SWAP_TARGET_AND_HOST (&retval, sizeof (retval));
- return retval;
+ return extract_address (&retval, sizeof (retval));
}
CORE_ADDR
frame_saved_pc (frame)
FRAME frame;
{
- CORE_ADDR prev_pc;
-
- if (get_current_frame () == frame) /* FIXME, debug check. Remove >=gdb-4.6 */
- {
- if (read_register (SP_REGNUM) != frame->bottom) abort();
- }
-
- read_memory ((CORE_ADDR) (frame->bottom + FRAME_SAVED_I0 +
- REGISTER_RAW_SIZE(I7_REGNUM) * (I7_REGNUM - I0_REGNUM)),
- (char *) &prev_pc,
- sizeof (CORE_ADDR));
+ REGISTER_TYPE retval;
+ CORE_ADDR addr;
- SWAP_TARGET_AND_HOST (&prev_pc, sizeof (prev_pc));
- return PC_ADJUST (prev_pc);
+ addr = (frame->bottom + FRAME_SAVED_I0 +
+ REGISTER_RAW_SIZE (I7_REGNUM) * (I7_REGNUM - I0_REGNUM));
+ read_memory (addr, (char *) &retval, sizeof (REGISTER_TYPE));
+ return PC_ADJUST (extract_address (&retval, sizeof (REGISTER_TYPE)));
}
/*
return fid;
}
-/* This code was written by Gary Beihl (beihl@mcc.com).
- It was modified by Michael Tiemann (tiemann@corto.inria.fr). */
-
-/*
- * This routine appears to be passed a size by which to increase the
- * stack. It then executes a save instruction in the inferior to
- * increase the stack by this amount. Only the register window system
- * should be affected by this; the program counter & etc. will not be.
- *
- * This instructions used for this purpose are:
- *
- * sethi %hi(0x0),g1 *
- * add g1,0x1ee0,g1 *
- * save sp,g1,sp
- * sethi %hi(0x0),g1 *
- * add g1,0x1ee0,g1 *
- * t g0,0x1,o0
- * sethi %hi(0x0),g0 (nop)
- *
- * I presume that these set g1 to be the negative of the size, do a
- * save (putting the stack pointer at sp - size) and restore the
- * original contents of g1. A * indicates that the actual value of
- * the instruction is modified below.
- */
-static unsigned int save_insn_opcodes[] = {
- 0x03000000, 0x82007ee0, 0x9de38001, 0x03000000,
- 0x82007ee0, 0x91d02001, 0x01000000 };
-
-/* Neither do_save_insn or do_restore_insn save stack configuration
- (current_frame, etc),
- since the stack is in an indeterminate state through the call to
- each of them. That is the responsibility of the routine which calls them. */
-
-static void
-do_save_insn (size)
- int size;
-{
- int g1 = read_register (G1_REGNUM);
- CORE_ADDR sp = read_register (SP_REGNUM);
- CORE_ADDR pc = read_register (PC_REGNUM);
- CORE_ADDR npc = read_register (NPC_REGNUM);
- CORE_ADDR fake_pc = sp - sizeof (save_insn_opcodes);
- struct inferior_status inf_status;
-
- save_inferior_status (&inf_status, 0); /* Don't restore stack info */
- /*
- * See above.
- */
- save_insn_opcodes[0] = 0x03000000 | ((-size >> 10) & 0x3fffff);
- save_insn_opcodes[1] = 0x82006000 | (-size & 0x3ff);
- save_insn_opcodes[3] = 0x03000000 | ((g1 >> 10) & 0x3fffff);
- save_insn_opcodes[4] = 0x82006000 | (g1 & 0x3ff);
- write_memory (fake_pc, (char *)save_insn_opcodes, sizeof (save_insn_opcodes));
-
- clear_proceed_status ();
- stop_after_trap = 1;
- proceed (fake_pc, 0, 0);
-
- write_register (PC_REGNUM, pc);
- write_register (NPC_REGNUM, npc);
- restore_inferior_status (&inf_status);
-}
-
-/*
- * This routine takes a program counter value. It restores the
- * register window system to the frame above the current one.
- * THIS ROUTINE CLOBBERS PC AND NPC IN THE TARGET!
- */
-
-/* The following insns translate to:
-
- restore %g0,%g0,%g0
- t %g0,1
- sethi %hi(0),%g0 */
-
-static unsigned int restore_insn_opcodes[] = {
- 0x81e80000, 0x91d02001, 0x01000000 };
-
-static void
-do_restore_insn ()
-{
- CORE_ADDR sp = read_register (SP_REGNUM);
- CORE_ADDR fake_pc = sp - sizeof (restore_insn_opcodes);
- struct inferior_status inf_status;
-
- save_inferior_status (&inf_status, 0); /* Don't restore stack info */
-
- write_memory (fake_pc, (char *)restore_insn_opcodes,
- sizeof (restore_insn_opcodes));
-
- clear_proceed_status ();
- stop_after_trap = 1;
- proceed (fake_pc, 0, 0);
-
- restore_inferior_status (&inf_status);
-}
-
/* Given a pc value, skip it forward past the function prologue by
disassembling instructions that appear to be a prologue.
/* Push an empty stack frame, and record in it the current PC, regs, etc.
- Note that the write's are of registers in the context of the newly
- pushed frame. Thus the the fp*'s, the g*'s, the i*'s, and
- the randoms, of the new frame, are being saved. The locals and outs
+ We save the non-windowed registers and the ins. The locals and outs
are new; they don't need to be saved. The i's and l's of
- the last frame were saved by the do_save_insn in the register
- file (now on the stack, since a context switch happended imm after).
+ the last frame were already saved on the stack
- The return pointer register %i7 does not have
- the pc saved into it (return from this frame will be accomplished
- by a POP_FRAME). In fact, we must leave it unclobbered, since we
- must preserve it in the calling routine except across call instructions. */
+ The return pointer register %i7 does not have the pc saved into it
+ (return from this frame will be accomplished by a POP_FRAME). In
+ fact, we must leave it unclobbered, since we must preserve it in
+ the calling routine except across call instructions. I'm not sure
+ the preceding sentence is true; isn't it based on confusing the %i7
+ saved in the dummy frame versus the one saved in the frame of the
+ calling routine? */
/* Definitely see tm-sparc.h for more doc of the frame format here. */
void
sparc_push_dummy_frame ()
{
- CORE_ADDR fp;
+ CORE_ADDR sp;
char register_temp[REGISTER_BYTES];
- do_save_insn (0x140); /* FIXME where does this value come from? */
- fp = read_register (FP_REGNUM);
+ sp = read_register (SP_REGNUM);
- read_register_bytes (REGISTER_BYTE (FP0_REGNUM), register_temp, 32 * 4);
- write_memory (fp - 0x80, register_temp, 32 * 4);
+ read_register_bytes (REGISTER_BYTE (FP0_REGNUM), register_temp,
+ REGISTER_RAW_SIZE (FP0_REGNUM) * 32);
+ write_memory (sp - 0x80, register_temp, REGISTER_RAW_SIZE (FP0_REGNUM) * 32);
- read_register_bytes (REGISTER_BYTE (G0_REGNUM), register_temp, 8 * 4);
- write_memory (fp - 0xa0, register_temp, 8 * 4);
+ read_register_bytes (REGISTER_BYTE (G0_REGNUM), register_temp,
+ REGISTER_RAW_SIZE (G0_REGNUM) * 8);
+ write_memory (sp - 0xa0, register_temp, REGISTER_RAW_SIZE (G0_REGNUM) * 8);
- read_register_bytes (REGISTER_BYTE (I0_REGNUM), register_temp, 8 * 4);
- write_memory (fp - 0xc0, register_temp, 8 * 4);
+ read_register_bytes (REGISTER_BYTE (O0_REGNUM), register_temp,
+ REGISTER_RAW_SIZE (O0_REGNUM) * 8);
+ write_memory (sp - 0xc0, register_temp, REGISTER_RAW_SIZE (O0_REGNUM) * 8);
/* Y, PS, WIM, TBR, PC, NPC, FPS, CPS regs */
- read_register_bytes (REGISTER_BYTE (Y_REGNUM), register_temp, 8 * 4);
- write_memory (fp - 0xe0, register_temp, 8 * 4);
+ read_register_bytes (REGISTER_BYTE (Y_REGNUM), register_temp,
+ REGISTER_RAW_SIZE (Y_REGNUM) * 8);
+ write_memory (sp - 0xe0, register_temp, REGISTER_RAW_SIZE (Y_REGNUM) * 8);
+
+ {
+ CORE_ADDR old_sp = sp;
+
+ /* Now move the stack pointer (equivalent to the add part of a save
+ instruction). */
+ sp -= 0x140;
+ write_register (SP_REGNUM, sp);
+
+ /* Now make sure that the frame pointer we save in the new frame points
+ to the old frame (equivalent to the register window shift part of
+ a save instruction). Need to do this after the write to the sp, or
+ else this might get written into the wrong set of saved ins&locals. */
+ write_register (FP_REGNUM, old_sp);
+ }
}
/* Discard from the stack the innermost frame, restoring all saved registers.
fi = get_frame_info (frame);
get_frame_saved_regs (fi, &fsr);
- do_restore_insn ();
if (fsr.regs[FP0_REGNUM])
{
read_memory (fsr.regs[FP0_REGNUM], raw_buffer, 32 * 4);
}
if (fsr.regs[I0_REGNUM])
{
+ CORE_ADDR sp;
+
+ char reg_temp[REGISTER_BYTES];
+
read_memory (fsr.regs[I0_REGNUM], raw_buffer, 8 * 4);
- write_register_bytes (REGISTER_BYTE (O0_REGNUM), raw_buffer, 8 * 4);
+
+ /* Get the ins and locals which we are about to restore. Just
+ moving the stack pointer is all that is really needed, except
+ store_inferior_registers is then going to write the ins and
+ locals from the registers array, so we need to muck with the
+ registers array. */
+ sp = fsr.regs[SP_REGNUM];
+ read_memory (sp, reg_temp, REGISTER_RAW_SIZE (L0_REGNUM) * 16);
+
+ /* Restore the out registers.
+ Among other things this writes the new stack pointer. */
+ write_register_bytes (REGISTER_BYTE (O0_REGNUM), raw_buffer,
+ REGISTER_RAW_SIZE (O0_REGNUM) * 8);
+
+ write_register_bytes (REGISTER_BYTE (L0_REGNUM), reg_temp,
+ REGISTER_RAW_SIZE (L0_REGNUM) * 16);
}
if (fsr.regs[PS_REGNUM])
write_register (PS_REGNUM, read_memory_integer (fsr.regs[PS_REGNUM], 4));
sparc_pc_adjust(pc)
CORE_ADDR pc;
{
- long insn;
+ unsigned long insn;
+ char buf[4];
int err;
- err = target_read_memory (pc + 8, (char *)&insn, sizeof(long));
- SWAP_TARGET_AND_HOST (&insn, sizeof(long));
+ err = target_read_memory (pc + 8, buf, sizeof(long));
+ insn = extract_unsigned_integer (buf, 4);
if ((err == 0) && (insn & 0xfffffe00) == 0)
return pc+12;
else
CORE_ADDR *pc;
{
CORE_ADDR jb_addr;
+#define LONGJMP_TARGET_SIZE 4
+ char buf[LONGJMP_TARGET_SIZE];
jb_addr = read_register(O0_REGNUM);
- if (target_read_memory(jb_addr + JB_PC * JB_ELEMENT_SIZE, (char *) pc,
- sizeof(CORE_ADDR)))
+ if (target_read_memory(jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
+ LONGJMP_TARGET_SIZE))
return 0;
- SWAP_TARGET_AND_HOST(pc, sizeof(CORE_ADDR));
+ *pc = extract_address (buf, LONGJMP_TARGET_SIZE);
return 1;
}
CORE_ADDR pc;
char *name;
{
- sec_ptr s;
+ struct obj_section *s;
int retval = 0;
s = find_pc_section(pc);
projects / deliverable / binutils-gdb.git / blobdiff