static char *sparclet_inits[] = {"\n\r\r\n", NULL};
-static struct monitor_ops sparclet_cmds =
+static struct monitor_ops sparclet_cmds ;
+
+static void
+init_sparclet_cmds(void)
{
- MO_CLR_BREAK_USES_ADDR |
- MO_HEX_PREFIX |
- MO_NO_ECHO_ON_OPEN |
- MO_NO_ECHO_ON_SETMEM |
- MO_RUN_FIRST_TIME |
- MO_GETMEM_READ_SINGLE, /* flags */
- sparclet_inits, /* Init strings */
- "cont\r", /* continue command */
- "step\r", /* single step */
- "\r", /* break interrupts the program */
- "+bp %x\r", /* set a breakpoint */
- /* can't use "br" because only 2 hw bps are supported */
- "-bp %x\r", /* clear a breakpoint */
- "-bp\r", /* clear all breakpoints */
- "fill %x -n %x -v %x -b\r", /* fill (start length val) */
- /* can't use "fi" because it takes words, not bytes */
- {
- /* ex [addr] [-n count] [-b|-s|-l] default: ex cur -n 1 -b */
- "ex %x -b\r%x\rq\r", /* setmem.cmdb (addr, value) */
- "ex %x -s\r%x\rq\r", /* setmem.cmdw (addr, value) */
- "ex %x -l\r%x\rq\r", /* setmem.cmdl (addr, value) */
- NULL, /* setmem.cmdll (addr, value) */
- NULL, /*": " */ /* setmem.resp_delim */
- NULL, /*"? " */ /* setmem.term */
- NULL, /*"q\r" */ /* setmem.term_cmd */
- },
- {
- /* since the parsing of multiple bytes is difficult due to
- interspersed addresses, we'll only read 1 value at a time,
- even tho these can handle a count */
- /* we can use -n to set count to read, but may have to parse? */
- "ex %x -n 1 -b\r", /* getmem.cmdb (addr, #bytes) */
- "ex %x -n 1 -s\r", /* getmem.cmdw (addr, #swords) */
- "ex %x -n 1 -l\r", /* getmem.cmdl (addr, #words) */
- NULL, /* getmem.cmdll (addr, #dwords) */
- ": ", /* getmem.resp_delim */
- NULL, /* getmem.term */
- NULL, /* getmem.term_cmd */
- },
- {
- "reg %s 0x%x\r", /* setreg.cmd (name, value) */
- NULL, /* setreg.resp_delim */
- NULL, /* setreg.term */
- NULL /* setreg.term_cmd */
- },
- {
- "reg %s\r", /* getreg.cmd (name) */
- " ", /* getreg.resp_delim */
- NULL, /* getreg.term */
- NULL, /* getreg.term_cmd */
- },
- "reg\r", /* dump_registers */
- "\\(\\w+\\)=\\([0-9a-fA-F]+\\)", /* register_pattern */
- sparclet_supply_register, /* supply_register */
- sparclet_load, /* load_routine */
- NULL, /* download command (srecs on console) */
- NULL, /* load response */
- "monitor>", /* monitor command prompt */
+ sparclet_cmds.flags = MO_CLR_BREAK_USES_ADDR |
+ MO_HEX_PREFIX |
+ MO_NO_ECHO_ON_OPEN |
+ MO_NO_ECHO_ON_SETMEM |
+ MO_RUN_FIRST_TIME |
+ MO_GETMEM_READ_SINGLE ; /* flags */
+ sparclet_cmds.init = sparclet_inits; /* Init strings */
+ sparclet_cmds.cont = "cont\r"; /* continue command */
+ sparclet_cmds.step = "step\r"; /* single step */
+ sparclet_cmds.stop = "\r"; /* break interrupts the program */
+ sparclet_cmds.set_break = "+bp %x\r"; /* set a breakpoint */
+ sparclet_cmds.clr_break = "-bp %x\r" ; /* can't use "br" because only 2 hw bps are supported */
+ sparclet_cmds.clr_all_break = "-bp %x\r"; /* clear a breakpoint */
+ "-bp\r" ; /* clear all breakpoints */
+ sparclet_cmds.fill = "fill %x -n %x -v %x -b\r"; /* fill (start length val) */
+ /* can't use "fi" because it takes words, not bytes */
+ /* ex [addr] [-n count] [-b|-s|-l] default: ex cur -n 1 -b */
+ sparclet_cmds.setmem.cmdb = "ex %x -b\r%x\rq\r"; /* setmem.cmdb (addr, value) */
+ sparclet_cmds.setmem.cmdw = "ex %x -s\r%x\rq\r"; /* setmem.cmdw (addr, value) */
+ sparclet_cmds.setmem.cmdl = "ex %x -l\r%x\rq\r"; /* setmem.cmdl (addr, value) */
+ sparclet_cmds.setmem.cmdll = NULL; /* setmem.cmdll (addr, value) */
+ sparclet_cmds.setmem.resp_delim = NULL; /*": " */ /* setmem.resp_delim */
+ sparclet_cmds.setmem.term = NULL; /*"? " */ /* setmem.term */
+ sparclet_cmds.setmem.term_cmd = NULL; /*"q\r" */ /* setmem.term_cmd */
+ /* since the parsing of multiple bytes is difficult due to
+ interspersed addresses, we'll only read 1 value at a time,
+ even tho these can handle a count */
+ /* we can use -n to set count to read, but may have to parse? */
+ sparclet_cmds.getmem.cmdb = "ex %x -n 1 -b\r"; /* getmem.cmdb (addr, #bytes) */
+ sparclet_cmds.getmem.cmdw = "ex %x -n 1 -s\r"; /* getmem.cmdw (addr, #swords) */
+ sparclet_cmds.getmem.cmdl = "ex %x -n 1 -l\r"; /* getmem.cmdl (addr, #words) */
+ sparclet_cmds.getmem.cmdll = NULL; /* getmem.cmdll (addr, #dwords) */
+ sparclet_cmds.getmem.resp_delim = ": "; /* getmem.resp_delim */
+ sparclet_cmds.getmem.term = NULL; /* getmem.term */
+ sparclet_cmds.getmem.term_cmd = NULL; /* getmem.term_cmd */
+ sparclet_cmds.setreg.cmd = "reg %s 0x%x\r"; /* setreg.cmd (name, value) */
+ sparclet_cmds.setreg.resp_delim = NULL; /* setreg.resp_delim */
+ sparclet_cmds.setreg.term = NULL; /* setreg.term */
+ sparclet_cmds.setreg.term_cmd = NULL ; /* setreg.term_cmd */
+ sparclet_cmds.getreg.cmd = "reg %s\r"; /* getreg.cmd (name) */
+ sparclet_cmds.getreg.resp_delim = " "; /* getreg.resp_delim */
+ sparclet_cmds.getreg.term = NULL; /* getreg.term */
+ sparclet_cmds.getreg.term_cmd = NULL; /* getreg.term_cmd */
+ sparclet_cmds.dump_registers = "reg\r"; /* dump_registers */
+ sparclet_cmds.register_pattern = "\\(\\w+\\)=\\([0-9a-fA-F]+\\)"; /* register_pattern */
+ sparclet_cmds.supply_register = sparclet_supply_register; /* supply_register */
+ sparclet_cmds.load_routine = sparclet_load; /* load_routine */
+ sparclet_cmds.load = NULL; /* download command (srecs on console) */
+ sparclet_cmds.loadresp = NULL; /* load response */
+ sparclet_cmds.prompt = "monitor>"; /* monitor command prompt */
/* yikes! gdb core dumps without this delimitor!! */
- "\r", /* end-of-command delimitor */
- NULL, /* optional command terminator */
- &sparclet_ops, /* target operations */
- SERIAL_1_STOPBITS, /* number of stop bits */
- sparclet_regnames, /* registers names */
- MONITOR_OPS_MAGIC /* magic */
+ sparclet_cmds.line_term = "\r"; /* end-of-command delimitor */
+ sparclet_cmds.cmd_end = NULL; /* optional command terminator */
+ sparclet_cmds.target = &sparclet_ops; /* target operations */
+ sparclet_cmds.stopbits = SERIAL_1_STOPBITS; /* number of stop bits */
+ sparclet_cmds.regnames = sparclet_regnames; /* registers names */
+ sparclet_cmds.magic = MONITOR_OPS_MAGIC ; /* magic */
};
static void
_initialize_sparclet ()
{
int i;
+ init_sparclet_cmds() ;
for (i = 0; i < NUM_REGS; i++)
if (sparclet_regnames[i][0] == 'c' ||