/* SPU target-dependent code for GDB, the GNU debugger.
- Copyright (C) 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+ Copyright (C) 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
Contributed by Ulrich Weigand <uweigand@de.ibm.com>.
Based on a port by Sid Manning <sid@us.ibm.com>.
return id;
}
-static ULONGEST
-spu_lslr (int id)
-{
- gdb_byte buf[32];
- char annex[32];
-
- if (id == -1)
- return SPU_LS_SIZE - 1;
-
- xsnprintf (annex, sizeof annex, "%d/lslr", id);
- memset (buf, 0, sizeof buf);
- target_read (¤t_target, TARGET_OBJECT_SPU, annex,
- buf, 0, sizeof buf);
-
- return strtoulst (buf, NULL, 16);
-}
-
static int
spu_address_class_type_flags (int byte_size, int dwarf2_addr_class)
{
struct type *type, const gdb_byte *buf)
{
int id = spu_gdbarch_id (gdbarch);
- ULONGEST lslr = spu_lslr (id);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
ULONGEST addr
= extract_unsigned_integer (buf, TYPE_LENGTH (type), byte_order);
if (TYPE_ADDRESS_CLASS_1 (type))
return addr;
- return addr? SPUADDR (id, addr & lslr) : 0;
+ return addr? SPUADDR (id, addr) : 0;
}
static CORE_ADDR
struct type *type, const gdb_byte *buf)
{
int id = spu_gdbarch_id (gdbarch);
- ULONGEST lslr = spu_lslr (id);
ULONGEST addr = unpack_long (type, buf);
- return SPUADDR (id, addr & lslr);
+ return SPUADDR (id, addr);
}
int found_sp = 0;
int found_fp = 0;
int found_lr = 0;
+ int found_bc = 0;
int reg_immed[SPU_NUM_GPRS];
gdb_byte buf[16];
CORE_ADDR prolog_pc = start_pc;
- The first instruction to set up the stack pointer.
- The first instruction to set up the frame pointer.
- The first instruction to save the link register.
+ - The first instruction to save the backchain.
- We return the instruction after the latest of these three,
+ We return the instruction after the latest of these four,
or the incoming PC if none is found. The first instruction
to set up the stack pointer also defines the frame size.
found_lr = 1;
prolog_pc = pc + 4;
}
+
+ if (ra == SPU_RAW_SP_REGNUM
+ && (found_sp? immed == 0 : rt == SPU_RAW_SP_REGNUM)
+ && !found_bc)
+ {
+ found_bc = 1;
+ prolog_pc = pc + 4;
+ }
}
/* _start uses SELB to set up the stack pointer. */
{
CORE_ADDR reg;
LONGEST backchain;
+ ULONGEST lslr;
int status;
+ /* Get local store limit. */
+ lslr = get_frame_register_unsigned (this_frame, SPU_LSLR_REGNUM);
+ if (!lslr)
+ lslr = (ULONGEST) -1;
+
/* Get the backchain. */
reg = get_frame_register_unsigned (this_frame, SPU_SP_REGNUM);
status = safe_read_memory_integer (SPUADDR (id, reg), 4, byte_order,
/* A zero backchain terminates the frame chain. Also, sanity
check against the local store size limit. */
- if (status && backchain > 0 && backchain < SPU_LS_SIZE)
+ if (status && backchain > 0 && backchain <= lslr)
{
/* Assume the link register is saved into its slot. */
- if (backchain + 16 < SPU_LS_SIZE)
+ if (backchain + 16 <= lslr)
info->saved_regs[SPU_LR_REGNUM].addr = SPUADDR (id, backchain + 16);
/* Frame bases. */
return breakpoint;
}
+static int
+spu_memory_remove_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
+{
+ /* We work around a problem in combined Cell/B.E. debugging here. Consider
+ that in a combined application, we have some breakpoints inserted in SPU
+ code, and now the application forks (on the PPU side). GDB common code
+ will assume that the fork system call copied all breakpoints into the new
+ process' address space, and that all those copies now need to be removed
+ (see breakpoint.c:detach_breakpoints).
+
+ While this is certainly true for PPU side breakpoints, it is not true
+ for SPU side breakpoints. fork will clone the SPU context file
+ descriptors, so that all the existing SPU contexts are in accessible
+ in the new process. However, the contents of the SPU contexts themselves
+ are *not* cloned. Therefore the effect of detach_breakpoints is to
+ remove SPU breakpoints from the *original* SPU context's local store
+ -- this is not the correct behaviour.
+
+ The workaround is to check whether the PID we are asked to remove this
+ breakpoint from (i.e. ptid_get_pid (inferior_ptid)) is different from the
+ PID of the current inferior (i.e. current_inferior ()->pid). This is only
+ true in the context of detach_breakpoints. If so, we simply do nothing.
+ [ Note that for the fork child process, it does not matter if breakpoints
+ remain inserted, because those SPU contexts are not runnable anyway --
+ the Linux kernel allows only the original process to invoke spu_run. */
+
+ if (ptid_get_pid (inferior_ptid) != current_inferior ()->pid)
+ return 0;
+
+ return default_memory_remove_breakpoint (gdbarch, bp_tgt);
+}
+
/* Software single-stepping support. */
spu_software_single_step (struct frame_info *frame)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct address_space *aspace = get_frame_address_space (frame);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
CORE_ADDR pc, next_pc;
unsigned int insn;
int offset, reg;
gdb_byte buf[4];
+ ULONGEST lslr;
pc = get_frame_pc (frame);
return 1;
insn = extract_unsigned_integer (buf, 4, byte_order);
+ /* Get local store limit. */
+ lslr = get_frame_register_unsigned (frame, SPU_LSLR_REGNUM);
+ if (!lslr)
+ lslr = (ULONGEST) -1;
+
/* Next sequential instruction is at PC + 4, except if the current
instruction is a PPE-assisted call, in which case it is at PC + 8.
Wrap around LS limit to be on the safe side. */
if ((insn & 0xffffff00) == 0x00002100)
- next_pc = (SPUADDR_ADDR (pc) + 8) & (SPU_LS_SIZE - 1);
+ next_pc = (SPUADDR_ADDR (pc) + 8) & lslr;
else
- next_pc = (SPUADDR_ADDR (pc) + 4) & (SPU_LS_SIZE - 1);
+ next_pc = (SPUADDR_ADDR (pc) + 4) & lslr;
- insert_single_step_breakpoint (gdbarch, SPUADDR (SPUADDR_SPU (pc), next_pc));
+ insert_single_step_breakpoint (gdbarch,
+ aspace, SPUADDR (SPUADDR_SPU (pc), next_pc));
if (is_branch (insn, &offset, ®))
{
target += extract_unsigned_integer (buf, 4, byte_order) & -4;
}
- target = target & (SPU_LS_SIZE - 1);
+ target = target & lslr;
if (target != next_pc)
- insert_single_step_breakpoint (gdbarch,
+ insert_single_step_breakpoint (gdbarch, aspace,
SPUADDR (SPUADDR_SPU (pc), target));
}
/* Whenever a new objfile is loaded, read the target's _ovly_table.
If there is one, go through all sections and make sure for non-
overlay sections LMA equals VMA, while for overlay sections LMA
- is larger than local store size. */
+ is larger than SPU_OVERLAY_LMA. */
static void
spu_overlay_new_objfile (struct objfile *objfile)
{
if (ovly_table[ndx].mapped_ptr == 0)
bfd_section_lma (obfd, bsect) = bfd_section_vma (obfd, bsect);
else
- bfd_section_lma (obfd, bsect) = bsect->filepos + SPU_LS_SIZE;
+ bfd_section_lma (obfd, bsect) = SPU_OVERLAY_LMA + bsect->filepos;
}
}
struct symbol *sym;
struct symtab_and_line sal;
- sym = lookup_block_symbol (block, "main", NULL, VAR_DOMAIN);
+ sym = lookup_block_symbol (block, "main", VAR_DOMAIN);
if (sym)
{
fixup_symbol_section (sym, objfile);
/* Use a numerical address for the set_breakpoint command to avoid having
the breakpoint re-set incorrectly. */
xsnprintf (buf, sizeof buf, "*%s", core_addr_to_string (pc));
- set_breakpoint (get_objfile_arch (objfile),
- buf, NULL /* condition */,
- 0 /* hardwareflag */, 1 /* tempflag */,
- -1 /* thread */, 0 /* ignore_count */,
- 0 /* pending */, 1 /* enabled */);
+ create_breakpoint (get_objfile_arch (objfile), buf /* arg */,
+ NULL /* cond_string */, -1 /* thread */,
+ 0 /* parse_condition_and_thread */, 1 /* tempflag */,
+ bp_breakpoint /* type_wanted */,
+ 0 /* ignore_count */,
+ AUTO_BOOLEAN_FALSE /* pending_break_support */,
+ NULL /* ops */, 0 /* from_tty */, 1 /* enabled */,
+ 0 /* internal */);
}
/* Breakpoints. */
set_gdbarch_decr_pc_after_break (gdbarch, 4);
set_gdbarch_breakpoint_from_pc (gdbarch, spu_breakpoint_from_pc);
+ set_gdbarch_memory_remove_breakpoint (gdbarch, spu_memory_remove_breakpoint);
set_gdbarch_cannot_step_breakpoint (gdbarch, 1);
set_gdbarch_software_single_step (gdbarch, spu_software_single_step);
set_gdbarch_get_longjmp_target (gdbarch, spu_get_longjmp_target);
projects / deliverable / binutils-gdb.git / blobdiff