/* SPU target-dependent code for GDB, the GNU debugger.
- Copyright (C) 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+ Copyright (C) 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
Contributed by Ulrich Weigand <uweigand@de.ibm.com>.
Based on a port by Sid Manning <sid@us.ibm.com>.
#include "regcache.h"
#include "reggroups.h"
#include "floatformat.h"
+#include "block.h"
#include "observer.h"
+#include "infcall.h"
#include "spu-tdep.h"
+/* The list of available "set spu " and "show spu " commands. */
+static struct cmd_list_element *setspucmdlist = NULL;
+static struct cmd_list_element *showspucmdlist = NULL;
+
+/* Whether to stop for new SPE contexts. */
+static int spu_stop_on_load_p = 0;
+/* Whether to automatically flush the SW-managed cache. */
+static int spu_auto_flush_cache_p = 1;
+
+
/* The tdep structure. */
struct gdbarch_tdep
{
return default_register_reggroup_p (gdbarch, regnum, group);
}
-/* Address conversion. */
+
+/* Address handling. */
static int
spu_gdbarch_id (struct gdbarch *gdbarch)
return id;
}
-static ULONGEST
-spu_lslr (int id)
+static int
+spu_address_class_type_flags (int byte_size, int dwarf2_addr_class)
{
- gdb_byte buf[32];
- char annex[32];
-
- if (id == -1)
- return SPU_LS_SIZE - 1;
+ if (dwarf2_addr_class == 1)
+ return TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1;
+ else
+ return 0;
+}
- xsnprintf (annex, sizeof annex, "%d/lslr", id);
- memset (buf, 0, sizeof buf);
- target_read (¤t_target, TARGET_OBJECT_SPU, annex,
- buf, 0, sizeof buf);
+static const char *
+spu_address_class_type_flags_to_name (struct gdbarch *gdbarch, int type_flags)
+{
+ if (type_flags & TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1)
+ return "__ea";
+ else
+ return NULL;
+}
- return strtoulst (buf, NULL, 16);
+static int
+spu_address_class_name_to_type_flags (struct gdbarch *gdbarch,
+ const char *name, int *type_flags_ptr)
+{
+ if (strcmp (name, "__ea") == 0)
+ {
+ *type_flags_ptr = TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1;
+ return 1;
+ }
+ else
+ return 0;
}
static void
struct type *type, const gdb_byte *buf)
{
int id = spu_gdbarch_id (gdbarch);
- ULONGEST lslr = spu_lslr (id);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
ULONGEST addr
= extract_unsigned_integer (buf, TYPE_LENGTH (type), byte_order);
- return addr? SPUADDR (id, addr & lslr) : 0;
+ /* Do not convert __ea pointers. */
+ if (TYPE_ADDRESS_CLASS_1 (type))
+ return addr;
+
+ return addr? SPUADDR (id, addr) : 0;
}
static CORE_ADDR
struct type *type, const gdb_byte *buf)
{
int id = spu_gdbarch_id (gdbarch);
- ULONGEST lslr = spu_lslr (id);
ULONGEST addr = unpack_long (type, buf);
- return SPUADDR (id, addr & lslr);
+ return SPUADDR (id, addr);
}
int found_sp = 0;
int found_fp = 0;
int found_lr = 0;
+ int found_bc = 0;
int reg_immed[SPU_NUM_GPRS];
gdb_byte buf[16];
CORE_ADDR prolog_pc = start_pc;
- The first instruction to set up the stack pointer.
- The first instruction to set up the frame pointer.
- The first instruction to save the link register.
+ - The first instruction to save the backchain.
- We return the instruction after the latest of these three,
+ We return the instruction after the latest of these four,
or the incoming PC if none is found. The first instruction
to set up the stack pointer also defines the frame size.
found_lr = 1;
prolog_pc = pc + 4;
}
+
+ if (ra == SPU_RAW_SP_REGNUM
+ && (found_sp? immed == 0 : rt == SPU_RAW_SP_REGNUM)
+ && !found_bc)
+ {
+ found_bc = 1;
+ prolog_pc = pc + 4;
+ }
}
/* _start uses SELB to set up the stack pointer. */
{
CORE_ADDR reg;
LONGEST backchain;
+ ULONGEST lslr;
int status;
+ /* Get local store limit. */
+ lslr = get_frame_register_unsigned (this_frame, SPU_LSLR_REGNUM);
+ if (!lslr)
+ lslr = (ULONGEST) -1;
+
/* Get the backchain. */
reg = get_frame_register_unsigned (this_frame, SPU_SP_REGNUM);
status = safe_read_memory_integer (SPUADDR (id, reg), 4, byte_order,
/* A zero backchain terminates the frame chain. Also, sanity
check against the local store size limit. */
- if (status && backchain > 0 && backchain < SPU_LS_SIZE)
+ if (status && backchain > 0 && backchain <= lslr)
{
/* Assume the link register is saved into its slot. */
- if (backchain + 16 < SPU_LS_SIZE)
+ if (backchain + 16 <= lslr)
info->saved_regs[SPU_LR_REGNUM].addr = SPUADDR (id, backchain + 16);
/* Frame bases. */
}
+/* Cell/B.E. cross-architecture unwinder support. */
+
+struct spu2ppu_cache
+{
+ struct frame_id frame_id;
+ struct regcache *regcache;
+};
+
+static struct gdbarch *
+spu2ppu_prev_arch (struct frame_info *this_frame, void **this_cache)
+{
+ struct spu2ppu_cache *cache = *this_cache;
+ return get_regcache_arch (cache->regcache);
+}
+
+static void
+spu2ppu_this_id (struct frame_info *this_frame,
+ void **this_cache, struct frame_id *this_id)
+{
+ struct spu2ppu_cache *cache = *this_cache;
+ *this_id = cache->frame_id;
+}
+
+static struct value *
+spu2ppu_prev_register (struct frame_info *this_frame,
+ void **this_cache, int regnum)
+{
+ struct spu2ppu_cache *cache = *this_cache;
+ struct gdbarch *gdbarch = get_regcache_arch (cache->regcache);
+ gdb_byte *buf;
+
+ buf = alloca (register_size (gdbarch, regnum));
+ regcache_cooked_read (cache->regcache, regnum, buf);
+ return frame_unwind_got_bytes (this_frame, regnum, buf);
+}
+
+static int
+spu2ppu_sniffer (const struct frame_unwind *self,
+ struct frame_info *this_frame, void **this_prologue_cache)
+{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ CORE_ADDR base, func, backchain;
+ gdb_byte buf[4];
+
+ if (gdbarch_bfd_arch_info (target_gdbarch)->arch == bfd_arch_spu)
+ return 0;
+
+ base = get_frame_sp (this_frame);
+ func = get_frame_pc (this_frame);
+ if (target_read_memory (base, buf, 4))
+ return 0;
+ backchain = extract_unsigned_integer (buf, 4, byte_order);
+
+ if (!backchain)
+ {
+ struct frame_info *fi;
+
+ struct spu2ppu_cache *cache
+ = FRAME_OBSTACK_CALLOC (1, struct spu2ppu_cache);
+
+ cache->frame_id = frame_id_build (base + 16, func);
+
+ for (fi = get_next_frame (this_frame); fi; fi = get_next_frame (fi))
+ if (gdbarch_bfd_arch_info (get_frame_arch (fi))->arch != bfd_arch_spu)
+ break;
+
+ if (fi)
+ {
+ cache->regcache = frame_save_as_regcache (fi);
+ *this_prologue_cache = cache;
+ return 1;
+ }
+ else
+ {
+ struct regcache *regcache;
+ regcache = get_thread_arch_regcache (inferior_ptid, target_gdbarch);
+ cache->regcache = regcache_dup (regcache);
+ *this_prologue_cache = cache;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static void
+spu2ppu_dealloc_cache (struct frame_info *self, void *this_cache)
+{
+ struct spu2ppu_cache *cache = this_cache;
+ regcache_xfree (cache->regcache);
+}
+
+static const struct frame_unwind spu2ppu_unwind = {
+ ARCH_FRAME,
+ spu2ppu_this_id,
+ spu2ppu_prev_register,
+ NULL,
+ spu2ppu_sniffer,
+ spu2ppu_dealloc_cache,
+ spu2ppu_prev_arch,
+};
+
+
/* Function calling convention. */
static CORE_ADDR
return breakpoint;
}
+static int
+spu_memory_remove_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
+{
+ /* We work around a problem in combined Cell/B.E. debugging here. Consider
+ that in a combined application, we have some breakpoints inserted in SPU
+ code, and now the application forks (on the PPU side). GDB common code
+ will assume that the fork system call copied all breakpoints into the new
+ process' address space, and that all those copies now need to be removed
+ (see breakpoint.c:detach_breakpoints).
+
+ While this is certainly true for PPU side breakpoints, it is not true
+ for SPU side breakpoints. fork will clone the SPU context file
+ descriptors, so that all the existing SPU contexts are in accessible
+ in the new process. However, the contents of the SPU contexts themselves
+ are *not* cloned. Therefore the effect of detach_breakpoints is to
+ remove SPU breakpoints from the *original* SPU context's local store
+ -- this is not the correct behaviour.
+
+ The workaround is to check whether the PID we are asked to remove this
+ breakpoint from (i.e. ptid_get_pid (inferior_ptid)) is different from the
+ PID of the current inferior (i.e. current_inferior ()->pid). This is only
+ true in the context of detach_breakpoints. If so, we simply do nothing.
+ [ Note that for the fork child process, it does not matter if breakpoints
+ remain inserted, because those SPU contexts are not runnable anyway --
+ the Linux kernel allows only the original process to invoke spu_run. */
+
+ if (ptid_get_pid (inferior_ptid) != current_inferior ()->pid)
+ return 0;
+
+ return default_memory_remove_breakpoint (gdbarch, bp_tgt);
+}
+
/* Software single-stepping support. */
spu_software_single_step (struct frame_info *frame)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct address_space *aspace = get_frame_address_space (frame);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
CORE_ADDR pc, next_pc;
unsigned int insn;
int offset, reg;
gdb_byte buf[4];
+ ULONGEST lslr;
pc = get_frame_pc (frame);
return 1;
insn = extract_unsigned_integer (buf, 4, byte_order);
+ /* Get local store limit. */
+ lslr = get_frame_register_unsigned (frame, SPU_LSLR_REGNUM);
+ if (!lslr)
+ lslr = (ULONGEST) -1;
+
/* Next sequential instruction is at PC + 4, except if the current
instruction is a PPE-assisted call, in which case it is at PC + 8.
Wrap around LS limit to be on the safe side. */
if ((insn & 0xffffff00) == 0x00002100)
- next_pc = (SPUADDR_ADDR (pc) + 8) & (SPU_LS_SIZE - 1);
+ next_pc = (SPUADDR_ADDR (pc) + 8) & lslr;
else
- next_pc = (SPUADDR_ADDR (pc) + 4) & (SPU_LS_SIZE - 1);
+ next_pc = (SPUADDR_ADDR (pc) + 4) & lslr;
- insert_single_step_breakpoint (gdbarch, SPUADDR (SPUADDR_SPU (pc), next_pc));
+ insert_single_step_breakpoint (gdbarch,
+ aspace, SPUADDR (SPUADDR_SPU (pc), next_pc));
if (is_branch (insn, &offset, ®))
{
target += extract_unsigned_integer (buf, 4, byte_order) & -4;
}
- target = target & (SPU_LS_SIZE - 1);
+ target = target & lslr;
if (target != next_pc)
- insert_single_step_breakpoint (gdbarch,
+ insert_single_step_breakpoint (gdbarch, aspace,
SPUADDR (SPUADDR_SPU (pc), target));
}
/* Whenever a new objfile is loaded, read the target's _ovly_table.
If there is one, go through all sections and make sure for non-
overlay sections LMA equals VMA, while for overlay sections LMA
- is larger than local store size. */
+ is larger than SPU_OVERLAY_LMA. */
static void
spu_overlay_new_objfile (struct objfile *objfile)
{
if (ovly_table[ndx].mapped_ptr == 0)
bfd_section_lma (obfd, bsect) = bfd_section_vma (obfd, bsect);
else
- bfd_section_lma (obfd, bsect) = bsect->filepos + SPU_LS_SIZE;
+ bfd_section_lma (obfd, bsect) = SPU_OVERLAY_LMA + bsect->filepos;
+ }
+}
+
+
+/* Insert temporary breakpoint on "main" function of newly loaded
+ SPE context OBJFILE. */
+static void
+spu_catch_start (struct objfile *objfile)
+{
+ struct minimal_symbol *minsym;
+ struct symtab *symtab;
+ CORE_ADDR pc;
+ char buf[32];
+
+ /* Do this only if requested by "set spu stop-on-load on". */
+ if (!spu_stop_on_load_p)
+ return;
+
+ /* Consider only SPU objfiles. */
+ if (!objfile || bfd_get_arch (objfile->obfd) != bfd_arch_spu)
+ return;
+
+ /* The main objfile is handled differently. */
+ if (objfile == symfile_objfile)
+ return;
+
+ /* There can be multiple symbols named "main". Search for the
+ "main" in *this* objfile. */
+ minsym = lookup_minimal_symbol ("main", NULL, objfile);
+ if (!minsym)
+ return;
+
+ /* If we have debugging information, try to use it -- this
+ will allow us to properly skip the prologue. */
+ pc = SYMBOL_VALUE_ADDRESS (minsym);
+ symtab = find_pc_sect_symtab (pc, SYMBOL_OBJ_SECTION (minsym));
+ if (symtab != NULL)
+ {
+ struct blockvector *bv = BLOCKVECTOR (symtab);
+ struct block *block = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+ struct symbol *sym;
+ struct symtab_and_line sal;
+
+ sym = lookup_block_symbol (block, "main", VAR_DOMAIN);
+ if (sym)
+ {
+ fixup_symbol_section (sym, objfile);
+ sal = find_function_start_sal (sym, 1);
+ pc = sal.pc;
+ }
}
+
+ /* Use a numerical address for the set_breakpoint command to avoid having
+ the breakpoint re-set incorrectly. */
+ xsnprintf (buf, sizeof buf, "*%s", core_addr_to_string (pc));
+ create_breakpoint (get_objfile_arch (objfile), buf /* arg */,
+ NULL /* cond_string */, -1 /* thread */,
+ 0 /* parse_condition_and_thread */, 1 /* tempflag */,
+ bp_breakpoint /* type_wanted */,
+ 0 /* ignore_count */,
+ AUTO_BOOLEAN_FALSE /* pending_break_support */,
+ NULL /* ops */, 0 /* from_tty */, 1 /* enabled */);
+}
+
+
+/* Look up OBJFILE loaded into FRAME's SPU context. */
+static struct objfile *
+spu_objfile_from_frame (struct frame_info *frame)
+{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ struct objfile *obj;
+
+ if (gdbarch_bfd_arch_info (gdbarch)->arch != bfd_arch_spu)
+ return NULL;
+
+ ALL_OBJFILES (obj)
+ {
+ if (obj->sections != obj->sections_end
+ && SPUADDR_SPU (obj_section_addr (obj->sections)) == tdep->id)
+ return obj;
+ }
+
+ return NULL;
+}
+
+/* Flush cache for ea pointer access if available. */
+static void
+flush_ea_cache (void)
+{
+ struct minimal_symbol *msymbol;
+ struct objfile *obj;
+
+ if (!has_stack_frames ())
+ return;
+
+ obj = spu_objfile_from_frame (get_current_frame ());
+ if (obj == NULL)
+ return;
+
+ /* Lookup inferior function __cache_flush. */
+ msymbol = lookup_minimal_symbol ("__cache_flush", NULL, obj);
+ if (msymbol != NULL)
+ {
+ struct type *type;
+ CORE_ADDR addr;
+
+ type = objfile_type (obj)->builtin_void;
+ type = lookup_function_type (type);
+ type = lookup_pointer_type (type);
+ addr = SYMBOL_VALUE_ADDRESS (msymbol);
+
+ call_function_by_hand (value_from_pointer (type, addr), 0, NULL);
+ }
+}
+
+/* This handler is called when the inferior has stopped. If it is stopped in
+ SPU architecture then flush the ea cache if used. */
+static void
+spu_attach_normal_stop (struct bpstats *bs, int print_frame)
+{
+ if (!spu_auto_flush_cache_p)
+ return;
+
+ /* Temporarily reset spu_auto_flush_cache_p to avoid recursively
+ re-entering this function when __cache_flush stops. */
+ spu_auto_flush_cache_p = 0;
+ flush_ea_cache ();
+ spu_auto_flush_cache_p = 1;
}
}
+/* Root of all "set spu "/"show spu " commands. */
+
+static void
+show_spu_command (char *args, int from_tty)
+{
+ help_list (showspucmdlist, "show spu ", all_commands, gdb_stdout);
+}
+
+static void
+set_spu_command (char *args, int from_tty)
+{
+ help_list (setspucmdlist, "set spu ", all_commands, gdb_stdout);
+}
+
+static void
+show_spu_stop_on_load (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Stopping for new SPE threads is %s.\n"),
+ value);
+}
+
+static void
+show_spu_auto_flush_cache (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Automatic software-cache flush is %s.\n"),
+ value);
+}
+
+
/* Set up gdbarch struct. */
static struct gdbarch *
set_gdbarch_double_format (gdbarch, floatformats_ieee_double);
set_gdbarch_long_double_format (gdbarch, floatformats_ieee_double);
- /* Address conversion. */
+ /* Address handling. */
set_gdbarch_address_to_pointer (gdbarch, spu_address_to_pointer);
set_gdbarch_pointer_to_address (gdbarch, spu_pointer_to_address);
set_gdbarch_integer_to_address (gdbarch, spu_integer_to_address);
+ set_gdbarch_address_class_type_flags (gdbarch, spu_address_class_type_flags);
+ set_gdbarch_address_class_type_flags_to_name
+ (gdbarch, spu_address_class_type_flags_to_name);
+ set_gdbarch_address_class_name_to_type_flags
+ (gdbarch, spu_address_class_name_to_type_flags);
+
/* Inferior function calls. */
set_gdbarch_call_dummy_location (gdbarch, ON_STACK);
set_gdbarch_skip_prologue (gdbarch, spu_skip_prologue);
set_gdbarch_in_function_epilogue_p (gdbarch, spu_in_function_epilogue_p);
+ /* Cell/B.E. cross-architecture unwinder support. */
+ frame_unwind_prepend_unwinder (gdbarch, &spu2ppu_unwind);
+
/* Breakpoints. */
set_gdbarch_decr_pc_after_break (gdbarch, 4);
set_gdbarch_breakpoint_from_pc (gdbarch, spu_breakpoint_from_pc);
+ set_gdbarch_memory_remove_breakpoint (gdbarch, spu_memory_remove_breakpoint);
set_gdbarch_cannot_step_breakpoint (gdbarch, 1);
set_gdbarch_software_single_step (gdbarch, spu_software_single_step);
set_gdbarch_get_longjmp_target (gdbarch, spu_get_longjmp_target);
observer_attach_new_objfile (spu_overlay_new_objfile);
spu_overlay_data = register_objfile_data ();
+ /* Install spu stop-on-load handler. */
+ observer_attach_new_objfile (spu_catch_start);
+
+ /* Add ourselves to normal_stop event chain. */
+ observer_attach_normal_stop (spu_attach_normal_stop);
+
+ /* Add root prefix command for all "set spu"/"show spu" commands. */
+ add_prefix_cmd ("spu", no_class, set_spu_command,
+ _("Various SPU specific commands."),
+ &setspucmdlist, "set spu ", 0, &setlist);
+ add_prefix_cmd ("spu", no_class, show_spu_command,
+ _("Various SPU specific commands."),
+ &showspucmdlist, "show spu ", 0, &showlist);
+
+ /* Toggle whether or not to add a temporary breakpoint at the "main"
+ function of new SPE contexts. */
+ add_setshow_boolean_cmd ("stop-on-load", class_support,
+ &spu_stop_on_load_p, _("\
+Set whether to stop for new SPE threads."),
+ _("\
+Show whether to stop for new SPE threads."),
+ _("\
+Use \"on\" to give control to the user when a new SPE thread\n\
+enters its \"main\" function.\n\
+Use \"off\" to disable stopping for new SPE threads."),
+ NULL,
+ show_spu_stop_on_load,
+ &setspucmdlist, &showspucmdlist);
+
+ /* Toggle whether or not to automatically flush the software-managed
+ cache whenever SPE execution stops. */
+ add_setshow_boolean_cmd ("auto-flush-cache", class_support,
+ &spu_auto_flush_cache_p, _("\
+Set whether to automatically flush the software-managed cache."),
+ _("\
+Show whether to automatically flush the software-managed cache."),
+ _("\
+Use \"on\" to automatically flush the software-managed cache\n\
+whenever SPE execution stops.\n\
+Use \"off\" to never automatically flush the software-managed cache."),
+ NULL,
+ show_spu_auto_flush_cache,
+ &setspucmdlist, &showspucmdlist);
+
/* Add root prefix command for all "info spu" commands. */
add_prefix_cmd ("spu", class_info, info_spu_command,
_("Various SPU specific commands."),
projects / deliverable / binutils-gdb.git / blobdiff